summaryrefslogtreecommitdiff
path: root/include/media
diff options
context:
space:
mode:
Diffstat (limited to 'include/media')
-rw-r--r--include/media/atmel-isi.h131
-rw-r--r--include/media/davinci/vpbe_display.h3
-rw-r--r--include/media/lirc_dev.h120
-rw-r--r--include/media/media-entity.h7
-rw-r--r--include/media/soc_camera.h2
-rw-r--r--include/media/tuner-types.h182
-rw-r--r--include/media/tuner.h152
-rw-r--r--include/media/tveeprom.h83
-rw-r--r--include/media/v4l2-dv-timings.h34
-rw-r--r--include/media/v4l2-ioctl.h8
-rw-r--r--include/media/v4l2-mem2mem.h11
-rw-r--r--include/media/videobuf2-core.h235
-rw-r--r--include/media/videobuf2-dma-contig.h2
-rw-r--r--include/media/videobuf2-dma-sg.h2
-rw-r--r--include/media/videobuf2-dvb.h8
-rw-r--r--include/media/videobuf2-memops.h2
-rw-r--r--include/media/videobuf2-v4l2.h149
-rw-r--r--include/media/videobuf2-vmalloc.h2
18 files changed, 651 insertions, 482 deletions
diff --git a/include/media/atmel-isi.h b/include/media/atmel-isi.h
deleted file mode 100644
index 6008b0985b7b..000000000000
--- a/include/media/atmel-isi.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * Register definitions for the Atmel Image Sensor Interface.
- *
- * Copyright (C) 2011 Atmel Corporation
- * Josh Wu, <josh.wu@atmel.com>
- *
- * Based on previous work by Lars Haring, <lars.haring@atmel.com>
- * and Sedji Gaouaou
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ATMEL_ISI_H__
-#define __ATMEL_ISI_H__
-
-#include <linux/types.h>
-
-/* ISI_V2 register offsets */
-#define ISI_CFG1 0x0000
-#define ISI_CFG2 0x0004
-#define ISI_PSIZE 0x0008
-#define ISI_PDECF 0x000c
-#define ISI_Y2R_SET0 0x0010
-#define ISI_Y2R_SET1 0x0014
-#define ISI_R2Y_SET0 0x0018
-#define ISI_R2Y_SET1 0x001C
-#define ISI_R2Y_SET2 0x0020
-#define ISI_CTRL 0x0024
-#define ISI_STATUS 0x0028
-#define ISI_INTEN 0x002C
-#define ISI_INTDIS 0x0030
-#define ISI_INTMASK 0x0034
-#define ISI_DMA_CHER 0x0038
-#define ISI_DMA_CHDR 0x003C
-#define ISI_DMA_CHSR 0x0040
-#define ISI_DMA_P_ADDR 0x0044
-#define ISI_DMA_P_CTRL 0x0048
-#define ISI_DMA_P_DSCR 0x004C
-#define ISI_DMA_C_ADDR 0x0050
-#define ISI_DMA_C_CTRL 0x0054
-#define ISI_DMA_C_DSCR 0x0058
-
-/* Bitfields in CFG1 */
-#define ISI_CFG1_HSYNC_POL_ACTIVE_LOW (1 << 2)
-#define ISI_CFG1_VSYNC_POL_ACTIVE_LOW (1 << 3)
-#define ISI_CFG1_PIXCLK_POL_ACTIVE_FALLING (1 << 4)
-#define ISI_CFG1_EMB_SYNC (1 << 6)
-#define ISI_CFG1_CRC_SYNC (1 << 7)
-/* Constants for FRATE(ISI_V2) */
-#define ISI_CFG1_FRATE_CAPTURE_ALL (0 << 8)
-#define ISI_CFG1_FRATE_DIV_2 (1 << 8)
-#define ISI_CFG1_FRATE_DIV_3 (2 << 8)
-#define ISI_CFG1_FRATE_DIV_4 (3 << 8)
-#define ISI_CFG1_FRATE_DIV_5 (4 << 8)
-#define ISI_CFG1_FRATE_DIV_6 (5 << 8)
-#define ISI_CFG1_FRATE_DIV_7 (6 << 8)
-#define ISI_CFG1_FRATE_DIV_8 (7 << 8)
-#define ISI_CFG1_FRATE_DIV_MASK (7 << 8)
-#define ISI_CFG1_DISCR (1 << 11)
-#define ISI_CFG1_FULL_MODE (1 << 12)
-/* Definition for THMASK(ISI_V2) */
-#define ISI_CFG1_THMASK_BEATS_4 (0 << 13)
-#define ISI_CFG1_THMASK_BEATS_8 (1 << 13)
-#define ISI_CFG1_THMASK_BEATS_16 (2 << 13)
-
-/* Bitfields in CFG2 */
-#define ISI_CFG2_GRAYSCALE (1 << 13)
-/* Constants for YCC_SWAP(ISI_V2) */
-#define ISI_CFG2_YCC_SWAP_DEFAULT (0 << 28)
-#define ISI_CFG2_YCC_SWAP_MODE_1 (1 << 28)
-#define ISI_CFG2_YCC_SWAP_MODE_2 (2 << 28)
-#define ISI_CFG2_YCC_SWAP_MODE_3 (3 << 28)
-#define ISI_CFG2_YCC_SWAP_MODE_MASK (3 << 28)
-#define ISI_CFG2_IM_VSIZE_OFFSET 0
-#define ISI_CFG2_IM_HSIZE_OFFSET 16
-#define ISI_CFG2_IM_VSIZE_MASK (0x7FF << ISI_CFG2_IM_VSIZE_OFFSET)
-#define ISI_CFG2_IM_HSIZE_MASK (0x7FF << ISI_CFG2_IM_HSIZE_OFFSET)
-
-/* Bitfields in CTRL */
-/* Also using in SR(ISI_V2) */
-#define ISI_CTRL_EN (1 << 0)
-#define ISI_CTRL_CDC (1 << 8)
-/* Also using in SR/IER/IDR/IMR(ISI_V2) */
-#define ISI_CTRL_DIS (1 << 1)
-#define ISI_CTRL_SRST (1 << 2)
-
-/* Bitfields in SR */
-#define ISI_SR_SIP (1 << 19)
-/* Also using in SR/IER/IDR/IMR */
-#define ISI_SR_VSYNC (1 << 10)
-#define ISI_SR_PXFR_DONE (1 << 16)
-#define ISI_SR_CXFR_DONE (1 << 17)
-#define ISI_SR_P_OVR (1 << 24)
-#define ISI_SR_C_OVR (1 << 25)
-#define ISI_SR_CRC_ERR (1 << 26)
-#define ISI_SR_FR_OVR (1 << 27)
-
-/* Bitfields in DMA_C_CTRL & in DMA_P_CTRL */
-#define ISI_DMA_CTRL_FETCH (1 << 0)
-#define ISI_DMA_CTRL_WB (1 << 1)
-#define ISI_DMA_CTRL_IEN (1 << 2)
-#define ISI_DMA_CTRL_DONE (1 << 3)
-
-/* Bitfields in DMA_CHSR/CHER/CHDR */
-#define ISI_DMA_CHSR_P_CH (1 << 0)
-#define ISI_DMA_CHSR_C_CH (1 << 1)
-
-/* Definition for isi_platform_data */
-#define ISI_DATAWIDTH_8 0x01
-#define ISI_DATAWIDTH_10 0x02
-
-struct v4l2_async_subdev;
-
-struct isi_platform_data {
- u8 has_emb_sync;
- u8 emb_crc_sync;
- u8 hsync_act_low;
- u8 vsync_act_low;
- u8 pclk_act_falling;
- u8 full_mode;
- u32 data_width_flags;
- /* Using for ISI_CFG1 */
- u32 frate;
- /* Using for ISI_MCK */
- u32 mck_hz;
- struct v4l2_async_subdev **asd; /* Flat array, arranged in groups */
- int *asd_sizes; /* 0-terminated array of asd group sizes */
-};
-
-#endif /* __ATMEL_ISI_H__ */
diff --git a/include/media/davinci/vpbe_display.h b/include/media/davinci/vpbe_display.h
index fa0247ad815f..e14a9370b67e 100644
--- a/include/media/davinci/vpbe_display.h
+++ b/include/media/davinci/vpbe_display.h
@@ -17,6 +17,7 @@
#include <linux/videodev2.h>
#include <media/v4l2-common.h>
#include <media/v4l2-fh.h>
+#include <media/videobuf2-v4l2.h>
#include <media/videobuf2-dma-contig.h>
#include <media/davinci/vpbe_types.h>
#include <media/davinci/vpbe_osd.h>
@@ -64,7 +65,7 @@ struct display_layer_info {
};
struct vpbe_disp_buffer {
- struct vb2_buffer vb;
+ struct vb2_v4l2_buffer vb;
struct list_head list;
};
diff --git a/include/media/lirc_dev.h b/include/media/lirc_dev.h
index 05e7ad5d2c8b..0ab59a571fee 100644
--- a/include/media/lirc_dev.h
+++ b/include/media/lirc_dev.h
@@ -118,6 +118,71 @@ static inline unsigned int lirc_buffer_write(struct lirc_buffer *buf,
return ret;
}
+/**
+ * struct lirc_driver - Defines the parameters on a LIRC driver
+ *
+ * @name: this string will be used for logs
+ *
+ * @minor: indicates minor device (/dev/lirc) number for
+ * registered driver if caller fills it with negative
+ * value, then the first free minor number will be used
+ * (if available).
+ *
+ * @code_length: length of the remote control key code expressed in bits.
+ *
+ * @buffer_size: Number of FIFO buffers with @chunk_size size. If zero,
+ * creates a buffer with BUFLEN size (16 bytes).
+ *
+ * @sample_rate: if zero, the device will wait for an event with a new
+ * code to be parsed. Otherwise, specifies the sample
+ * rate for polling. Value should be between 0
+ * and HZ. If equal to HZ, it would mean one polling per
+ * second.
+ *
+ * @features: lirc compatible hardware features, like LIRC_MODE_RAW,
+ * LIRC_CAN_*, as defined at include/media/lirc.h.
+ *
+ * @chunk_size: Size of each FIFO buffer.
+ *
+ * @data: it may point to any driver data and this pointer will
+ * be passed to all callback functions.
+ *
+ * @min_timeout: Minimum timeout for record. Valid only if
+ * LIRC_CAN_SET_REC_TIMEOUT is defined.
+ *
+ * @max_timeout: Maximum timeout for record. Valid only if
+ * LIRC_CAN_SET_REC_TIMEOUT is defined.
+ *
+ * @add_to_buf: add_to_buf will be called after specified period of the
+ * time or triggered by the external event, this behavior
+ * depends on value of the sample_rate this function will
+ * be called in user context. This routine should return
+ * 0 if data was added to the buffer and -ENODATA if none
+ * was available. This should add some number of bits
+ * evenly divisible by code_length to the buffer.
+ *
+ * @rbuf: if not NULL, it will be used as a read buffer, you will
+ * have to write to the buffer by other means, like irq's
+ * (see also lirc_serial.c).
+ *
+ * @set_use_inc: set_use_inc will be called after device is opened
+ *
+ * @set_use_dec: set_use_dec will be called after device is closed
+ *
+ * @rdev: Pointed to struct rc_dev associated with the LIRC
+ * device.
+ *
+ * @fops: file_operations for drivers which don't fit the current
+ * driver model.
+ * Some ioctl's can be directly handled by lirc_dev if the
+ * driver's ioctl function is NULL or if it returns
+ * -ENOIOCTLCMD (see also lirc_serial.c).
+ *
+ * @dev: pointer to the struct device associated with the LIRC
+ * device.
+ *
+ * @owner: the module owning this struct
+ */
struct lirc_driver {
char name[40];
int minor;
@@ -131,65 +196,16 @@ struct lirc_driver {
void *data;
int min_timeout;
int max_timeout;
- int (*add_to_buf) (void *data, struct lirc_buffer *buf);
+ int (*add_to_buf)(void *data, struct lirc_buffer *buf);
struct lirc_buffer *rbuf;
- int (*set_use_inc) (void *data);
- void (*set_use_dec) (void *data);
+ int (*set_use_inc)(void *data);
+ void (*set_use_dec)(void *data);
struct rc_dev *rdev;
const struct file_operations *fops;
struct device *dev;
struct module *owner;
};
-/* name:
- * this string will be used for logs
- *
- * minor:
- * indicates minor device (/dev/lirc) number for registered driver
- * if caller fills it with negative value, then the first free minor
- * number will be used (if available)
- *
- * code_length:
- * length of the remote control key code expressed in bits
- *
- * sample_rate:
- *
- * data:
- * it may point to any driver data and this pointer will be passed to
- * all callback functions
- *
- * add_to_buf:
- * add_to_buf will be called after specified period of the time or
- * triggered by the external event, this behavior depends on value of
- * the sample_rate this function will be called in user context. This
- * routine should return 0 if data was added to the buffer and
- * -ENODATA if none was available. This should add some number of bits
- * evenly divisible by code_length to the buffer
- *
- * rbuf:
- * if not NULL, it will be used as a read buffer, you will have to
- * write to the buffer by other means, like irq's (see also
- * lirc_serial.c).
- *
- * set_use_inc:
- * set_use_inc will be called after device is opened
- *
- * set_use_dec:
- * set_use_dec will be called after device is closed
- *
- * fops:
- * file_operations for drivers which don't fit the current driver model.
- *
- * Some ioctl's can be directly handled by lirc_dev if the driver's
- * ioctl function is NULL or if it returns -ENOIOCTLCMD (see also
- * lirc_serial.c).
- *
- * owner:
- * the module owning this struct
- *
- */
-
-
/* following functions can be called ONLY from user context
*
* returns negative value on error or minor number
diff --git a/include/media/media-entity.h b/include/media/media-entity.h
index 0c003d817493..197f93799753 100644
--- a/include/media/media-entity.h
+++ b/include/media/media-entity.h
@@ -116,6 +116,13 @@ static inline u32 media_entity_subtype(struct media_entity *entity)
#define MEDIA_ENTITY_ENUM_MAX_DEPTH 16
#define MEDIA_ENTITY_ENUM_MAX_ID 64
+/*
+ * The number of pads can't be bigger than the number of entities,
+ * as the worse-case scenario is to have one entity linked up to
+ * MEDIA_ENTITY_ENUM_MAX_ID - 1 entities.
+ */
+#define MEDIA_ENTITY_MAX_PADS (MEDIA_ENTITY_ENUM_MAX_ID - 1)
+
struct media_entity_graph {
struct {
struct media_entity *entity;
diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h
index 2f6261f3e570..97aa13314bfd 100644
--- a/include/media/soc_camera.h
+++ b/include/media/soc_camera.h
@@ -18,7 +18,7 @@
#include <linux/pm.h>
#include <linux/videodev2.h>
#include <media/videobuf-core.h>
-#include <media/videobuf2-core.h>
+#include <media/videobuf2-v4l2.h>
#include <media/v4l2-async.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
diff --git a/include/media/tuner-types.h b/include/media/tuner-types.h
index ab03c5344209..094e112cc325 100644
--- a/include/media/tuner-types.h
+++ b/include/media/tuner-types.h
@@ -5,6 +5,15 @@
#ifndef __TUNER_TYPES_H__
#define __TUNER_TYPES_H__
+/**
+ * enum param_type - type of the tuner pameters
+ *
+ * @TUNER_PARAM_TYPE_RADIO: Tuner params are for FM and/or AM radio
+ * @TUNER_PARAM_TYPE_PAL: Tuner params are for PAL color TV standard
+ * @TUNER_PARAM_TYPE_SECAM: Tuner params are for SECAM color TV standard
+ * @TUNER_PARAM_TYPE_NTSC: Tuner params are for NTSC color TV standard
+ * @TUNER_PARAM_TYPE_DIGITAL: Tuner params are for digital TV
+ */
enum param_type {
TUNER_PARAM_TYPE_RADIO,
TUNER_PARAM_TYPE_PAL,
@@ -13,97 +22,142 @@ enum param_type {
TUNER_PARAM_TYPE_DIGITAL,
};
+/**
+ * struct tuner_range - define the frequencies supported by the tuner
+ *
+ * @limit: Max frequency supported by that range, in 62.5 kHz
+ * (TV) or 62.5 Hz (Radio), as defined by
+ * V4L2_TUNER_CAP_LOW.
+ * @config: Value of the band switch byte (BB) to setup this mode.
+ * @cb: Value of the CB byte to setup this mode.
+ *
+ * Please notice that digital tuners like xc3028/xc4000/xc5000 don't use
+ * those ranges, as they're defined inside the driver. This is used by
+ * analog tuners that are compatible with the "Philips way" to setup the
+ * tuners. On those devices, the tuner set is done via 4 bytes:
+ * divider byte1 (DB1), divider byte 2 (DB2), Control byte (CB) and
+ * band switch byte (BB).
+ * Some tuners also have an additional optional Auxiliary byte (AB).
+ */
struct tuner_range {
unsigned short limit;
unsigned char config;
unsigned char cb;
};
+/**
+ * struct tuner_params - Parameters to be used to setup the tuner. Those
+ * are used by drivers/media/tuners/tuner-types.c in
+ * order to specify the tuner properties. Most of
+ * the parameters are for tuners based on tda9887 IF-PLL
+ * multi-standard analog TV/Radio demodulator, with is
+ * very common on legacy analog tuners.
+ *
+ * @type: Type of the tuner parameters, as defined at
+ * enum param_type. If the tuner supports multiple
+ * standards, an array should be used, with one
+ * row per different standard.
+ * @cb_first_if_lower_freq: Many Philips-based tuners have a comment in
+ * their datasheet like
+ * "For channel selection involving band
+ * switching, and to ensure smooth tuning to the
+ * desired channel without causing unnecessary
+ * charge pump action, it is recommended to
+ * consider the difference between wanted channel
+ * frequency and the current channel frequency.
+ * Unnecessary charge pump action will result
+ * in very low tuning voltage which may drive the
+ * oscillator to extreme conditions".
+ * Set cb_first_if_lower_freq to 1, if this check
+ * is required for this tuner. I tested this for
+ * PAL by first setting the TV frequency to
+ * 203 MHz and then switching to 96.6 MHz FM
+ * radio. The result was static unless the
+ * control byte was sent first.
+ * @has_tda9887: Set to 1 if this tuner uses a tda9887
+ * @port1_fm_high_sensitivity: Many Philips tuners use tda9887 PORT1 to select
+ * the FM radio sensitivity. If this setting is 1,
+ * then set PORT1 to 1 to get proper FM reception.
+ * @port2_fm_high_sensitivity: Some Philips tuners use tda9887 PORT2 to select
+ * the FM radio sensitivity. If this setting is 1,
+ * then set PORT2 to 1 to get proper FM reception.
+ * @fm_gain_normal: Some Philips tuners use tda9887 cGainNormal to
+ * select the FM radio sensitivity. If this
+ * setting is 1, e register will use cGainNormal
+ * instead of cGainLow.
+ * @intercarrier_mode: Most tuners with a tda9887 use QSS mode.
+ * Some (cheaper) tuners use Intercarrier mode.
+ * If this setting is 1, then the tuner needs to
+ * be set to intercarrier mode.
+ * @port1_active: This setting sets the default value for PORT1.
+ * 0 means inactive, 1 means active. Note: the
+ * actual bit value written to the tda9887 is
+ * inverted. So a 0 here means a 1 in the B6 bit.
+ * @port2_active: This setting sets the default value for PORT2.
+ * 0 means inactive, 1 means active. Note: the
+ * actual bit value written to the tda9887 is
+ * inverted. So a 0 here means a 1 in the B7 bit.
+ * @port1_invert_for_secam_lc: Sometimes PORT1 is inverted when the SECAM-L'
+ * standard is selected. Set this bit to 1 if this
+ * is needed.
+ * @port2_invert_for_secam_lc: Sometimes PORT2 is inverted when the SECAM-L'
+ * standard is selected. Set this bit to 1 if this
+ * is needed.
+ * @port1_set_for_fm_mono: Some cards require PORT1 to be 1 for mono Radio
+ * FM and 0 for stereo.
+ * @default_pll_gating_18: Select 18% (or according to datasheet 0%)
+ * L standard PLL gating, vs the driver default
+ * of 36%.
+ * @radio_if: IF to use in radio mode. Tuners with a
+ * separate radio IF filter seem to use 10.7,
+ * while those without use 33.3 for PAL/SECAM
+ * tuners and 41.3 for NTSC tuners.
+ * 0 = 10.7, 1 = 33.3, 2 = 41.3
+ * @default_top_low: Default tda9887 TOP value in dB for the low
+ * band. Default is 0. Range: -16:+15
+ * @default_top_mid: Default tda9887 TOP value in dB for the mid
+ * band. Default is 0. Range: -16:+15
+ * @default_top_high: Default tda9887 TOP value in dB for the high
+ * band. Default is 0. Range: -16:+15
+ * @default_top_secam_low: Default tda9887 TOP value in dB for SECAM-L/L'
+ * for the low band. Default is 0. Several tuners
+ * require a different TOP value for the
+ * SECAM-L/L' standards. Range: -16:+15
+ * @default_top_secam_mid: Default tda9887 TOP value in dB for SECAM-L/L'
+ * for the mid band. Default is 0. Several tuners
+ * require a different TOP value for the
+ * SECAM-L/L' standards. Range: -16:+15
+ * @default_top_secam_high: Default tda9887 TOP value in dB for SECAM-L/L'
+ * for the high band. Default is 0. Several tuners
+ * require a different TOP value for the
+ * SECAM-L/L' standards. Range: -16:+15
+ * @iffreq: Intermediate frequency (IF) used by the tuner
+ * on digital mode.
+ * @count: Size of the ranges array.
+ * @ranges: Array with the frequency ranges supported by
+ * the tuner.
+ */
struct tuner_params {
enum param_type type;
- /* Many Philips based tuners have a comment like this in their
- * datasheet:
- *
- * For channel selection involving band switching, and to ensure
- * smooth tuning to the desired channel without causing
- * unnecessary charge pump action, it is recommended to consider
- * the difference between wanted channel frequency and the
- * current channel frequency. Unnecessary charge pump action
- * will result in very low tuning voltage which may drive the
- * oscillator to extreme conditions.
- *
- * Set cb_first_if_lower_freq to 1, if this check is
- * required for this tuner.
- *
- * I tested this for PAL by first setting the TV frequency to
- * 203 MHz and then switching to 96.6 MHz FM radio. The result was
- * static unless the control byte was sent first.
- */
unsigned int cb_first_if_lower_freq:1;
- /* Set to 1 if this tuner uses a tda9887 */
unsigned int has_tda9887:1;
- /* Many Philips tuners use tda9887 PORT1 to select the FM radio
- sensitivity. If this setting is 1, then set PORT1 to 1 to
- get proper FM reception. */
unsigned int port1_fm_high_sensitivity:1;
- /* Some Philips tuners use tda9887 PORT2 to select the FM radio
- sensitivity. If this setting is 1, then set PORT2 to 1 to
- get proper FM reception. */
unsigned int port2_fm_high_sensitivity:1;
- /* Some Philips tuners use tda9887 cGainNormal to select the FM radio
- sensitivity. If this setting is 1, e register will use cGainNormal
- instead of cGainLow. */
unsigned int fm_gain_normal:1;
- /* Most tuners with a tda9887 use QSS mode. Some (cheaper) tuners
- use Intercarrier mode. If this setting is 1, then the tuner
- needs to be set to intercarrier mode. */
unsigned int intercarrier_mode:1;
- /* This setting sets the default value for PORT1.
- 0 means inactive, 1 means active. Note: the actual bit
- value written to the tda9887 is inverted. So a 0 here
- means a 1 in the B6 bit. */
unsigned int port1_active:1;
- /* This setting sets the default value for PORT2.
- 0 means inactive, 1 means active. Note: the actual bit
- value written to the tda9887 is inverted. So a 0 here
- means a 1 in the B7 bit. */
unsigned int port2_active:1;
- /* Sometimes PORT1 is inverted when the SECAM-L' standard is selected.
- Set this bit to 1 if this is needed. */
unsigned int port1_invert_for_secam_lc:1;
- /* Sometimes PORT2 is inverted when the SECAM-L' standard is selected.
- Set this bit to 1 if this is needed. */
unsigned int port2_invert_for_secam_lc:1;
- /* Some cards require PORT1 to be 1 for mono Radio FM and 0 for stereo. */
unsigned int port1_set_for_fm_mono:1;
- /* Select 18% (or according to datasheet 0%) L standard PLL gating,
- vs the driver default of 36%. */
unsigned int default_pll_gating_18:1;
- /* IF to use in radio mode. Tuners with a separate radio IF filter
- seem to use 10.7, while those without use 33.3 for PAL/SECAM tuners
- and 41.3 for NTSC tuners. 0 = 10.7, 1 = 33.3, 2 = 41.3 */
unsigned int radio_if:2;
- /* Default tda9887 TOP value in dB for the low band. Default is 0.
- Range: -16:+15 */
signed int default_top_low:5;
- /* Default tda9887 TOP value in dB for the mid band. Default is 0.
- Range: -16:+15 */
signed int default_top_mid:5;
- /* Default tda9887 TOP value in dB for the high band. Default is 0.
- Range: -16:+15 */
signed int default_top_high:5;
- /* Default tda9887 TOP value in dB for SECAM-L/L' for the low band.
- Default is 0. Several tuners require a different TOP value for
- the SECAM-L/L' standards. Range: -16:+15 */
signed int default_top_secam_low:5;
- /* Default tda9887 TOP value in dB for SECAM-L/L' for the mid band.
- Default is 0. Several tuners require a different TOP value for
- the SECAM-L/L' standards. Range: -16:+15 */
signed int default_top_secam_mid:5;
- /* Default tda9887 TOP value in dB for SECAM-L/L' for the high band.
- Default is 0. Several tuners require a different TOP value for
- the SECAM-L/L' standards. Range: -16:+15 */
signed int default_top_secam_high:5;
u16 iffreq;
diff --git a/include/media/tuner.h b/include/media/tuner.h
index b46ebb48fe74..486b6a54363b 100644
--- a/include/media/tuner.h
+++ b/include/media/tuner.h
@@ -1,23 +1,19 @@
/*
- tuner.h - definition for different tuners
-
- Copyright (C) 1997 Markus Schroeder (schroedm@uni-duesseldorf.de)
- minor modifications by Ralph Metzler (rjkm@thp.uni-koeln.de)
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
+ * tuner.h - definition for different tuners
+ *
+ * Copyright (C) 1997 Markus Schroeder (schroedm@uni-duesseldorf.de)
+ * minor modifications by Ralph Metzler (rjkm@thp.uni-koeln.de)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
#ifndef _TUNER_H
#define _TUNER_H
@@ -83,8 +79,11 @@
#define TUNER_PHILIPS_FM1236_MK3 43
#define TUNER_PHILIPS_4IN1 44 /* ATI TV Wonder Pro - Conexant */
-/* Microtune merged with Temic 12/31/1999 partially financed by Alps - these may be similar to Temic */
-#define TUNER_MICROTUNE_4049FM5 45
+ /*
+ * Microtune merged with Temic 12/31/1999 partially financed by Alps.
+ * these may be similar to Temic
+ */
+#define TUNER_MICROTUNE_4049FM5 45
#define TUNER_PANASONIC_VP27 46
#define TUNER_LG_NTSC_TAPE 47
@@ -115,11 +114,11 @@
#define TUNER_PHILIPS_TUV1236D 68 /* ATI HDTV Wonder */
#define TUNER_TNF_5335MF 69 /* Sabrent Bt848 */
-#define TUNER_SAMSUNG_TCPN_2121P30A 70 /* Hauppauge PVR-500MCE NTSC */
+#define TUNER_SAMSUNG_TCPN_2121P30A 70 /* Hauppauge PVR-500MCE NTSC */
#define TUNER_XC2028 71
#define TUNER_THOMSON_FE6600 72 /* DViCO FusionHDTV DVB-T Hybrid */
-#define TUNER_SAMSUNG_TCPG_6121P30A 73 /* Hauppauge PVR-500 PAL */
+#define TUNER_SAMSUNG_TCPG_6121P30A 73 /* Hauppauge PVR-500 PAL */
#define TUNER_TDA9887 74 /* This tuner should be used only internally */
#define TUNER_TEA5761 75 /* Only FM Radio Tuner */
#define TUNER_XC5000 76 /* Xceive Silicon Tuner */
@@ -143,57 +142,92 @@
#define TUNER_SONY_BTF_PB463Z 91 /* NTSC */
/* tv card specific */
-#define TDA9887_PRESENT (1<<0)
-#define TDA9887_PORT1_INACTIVE (1<<1)
-#define TDA9887_PORT2_INACTIVE (1<<2)
-#define TDA9887_QSS (1<<3)
-#define TDA9887_INTERCARRIER (1<<4)
-#define TDA9887_PORT1_ACTIVE (1<<5)
-#define TDA9887_PORT2_ACTIVE (1<<6)
-#define TDA9887_INTERCARRIER_NTSC (1<<7)
+#define TDA9887_PRESENT (1<<0)
+#define TDA9887_PORT1_INACTIVE (1<<1)
+#define TDA9887_PORT2_INACTIVE (1<<2)
+#define TDA9887_QSS (1<<3)
+#define TDA9887_INTERCARRIER (1<<4)
+#define TDA9887_PORT1_ACTIVE (1<<5)
+#define TDA9887_PORT2_ACTIVE (1<<6)
+#define TDA9887_INTERCARRIER_NTSC (1<<7)
/* Tuner takeover point adjustment, in dB, -16 <= top <= 15 */
-#define TDA9887_TOP_MASK (0x3f << 8)
-#define TDA9887_TOP_SET (1 << 13)
-#define TDA9887_TOP(top) (TDA9887_TOP_SET | (((16 + (top)) & 0x1f) << 8))
+#define TDA9887_TOP_MASK (0x3f << 8)
+#define TDA9887_TOP_SET (1 << 13)
+#define TDA9887_TOP(top) (TDA9887_TOP_SET | \
+ (((16 + (top)) & 0x1f) << 8))
/* config options */
-#define TDA9887_DEEMPHASIS_MASK (3<<16)
-#define TDA9887_DEEMPHASIS_NONE (1<<16)
-#define TDA9887_DEEMPHASIS_50 (2<<16)
-#define TDA9887_DEEMPHASIS_75 (3<<16)
-#define TDA9887_AUTOMUTE (1<<18)
+#define TDA9887_DEEMPHASIS_MASK (3<<16)
+#define TDA9887_DEEMPHASIS_NONE (1<<16)
+#define TDA9887_DEEMPHASIS_50 (2<<16)
+#define TDA9887_DEEMPHASIS_75 (3<<16)
+#define TDA9887_AUTOMUTE (1<<18)
#define TDA9887_GATING_18 (1<<19)
#define TDA9887_GAIN_NORMAL (1<<20)
#define TDA9887_RIF_41_3 (1<<21) /* radio IF1 41.3 vs 33.3 */
+/**
+ * enum tuner_mode - Mode of the tuner
+ *
+ * @T_RADIO: Tuner core will work in radio mode
+ * @T_ANALOG_TV: Tuner core will work in analog TV mode
+ *
+ * Older boards only had a single tuner device, but some devices have a
+ * separate tuner for radio. In any case, the tuner-core needs to know if
+ * the tuner chip(s) will be used in radio mode or analog TV mode, as, on
+ * radio mode, frequencies are specified on a different range than on TV
+ * mode. This enum is used by the tuner core in order to work with the
+ * proper tuner range and eventually use a different tuner chip while in
+ * radio mode.
+ */
enum tuner_mode {
T_RADIO = 1 << V4L2_TUNER_RADIO,
T_ANALOG_TV = 1 << V4L2_TUNER_ANALOG_TV,
- /* Don't need to map V4L2_TUNER_DIGITAL_TV, as tuner-core won't use it */
+ /* Don't map V4L2_TUNER_DIGITAL_TV, as tuner-core won't use it */
};
-/* Older boards only had a single tuner device. Nowadays multiple tuner
- devices may be present on a single board. Using TUNER_SET_TYPE_ADDR
- to pass the tuner_setup structure it is possible to setup each tuner
- device in turn.
-
- Since multiple devices may be present it is no longer sufficient to
- send a command to a single i2c device. Instead you should broadcast
- the command to all i2c devices.
-
- By setting the mode_mask correctly you can select which commands are
- accepted by a specific tuner device. For example, set mode_mask to
- T_RADIO if the device is a radio-only tuner. That specific tuner will
- only accept commands when the tuner is in radio mode and ignore them
- when the tuner is set to TV mode.
+/**
+ * struct tuner_setup - setup the tuner chipsets
+ *
+ * @addr: I2C address used to control the tuner device/chipset
+ * @type: Type of the tuner, as defined at the TUNER_* macros.
+ * Each different tuner model should have an unique
+ * identifier.
+ * @mode_mask: Mask with the allowed tuner modes: V4L2_TUNER_RADIO,
+ * V4L2_TUNER_ANALOG_TV and/or V4L2_TUNER_DIGITAL_TV,
+ * describing if the tuner should be used to support
+ * Radio, analog TV and/or digital TV.
+ * @config: Used to send tuner-specific configuration for complex
+ * tuners that require extra parameters to be set.
+ * Only a very few tuners require it and its usage on
+ * newer tuners should be avoided.
+ * @tuner_callback: Some tuners require to call back the bridge driver,
+ * in order to do some tasks like rising a GPIO at the
+ * bridge chipset, in order to do things like resetting
+ * the device.
+ *
+ * Older boards only had a single tuner device. Nowadays multiple tuner
+ * devices may be present on a single board. Using TUNER_SET_TYPE_ADDR
+ * to pass the tuner_setup structure it is possible to setup each tuner
+ * device in turn.
+ *
+ * Since multiple devices may be present it is no longer sufficient to
+ * send a command to a single i2c device. Instead you should broadcast
+ * the command to all i2c devices.
+ *
+ * By setting the mode_mask correctly you can select which commands are
+ * accepted by a specific tuner device. For example, set mode_mask to
+ * T_RADIO if the device is a radio-only tuner. That specific tuner will
+ * only accept commands when the tuner is in radio mode and ignore them
+ * when the tuner is set to TV mode.
*/
struct tuner_setup {
- unsigned short addr; /* I2C address */
- unsigned int type; /* Tuner type */
- unsigned int mode_mask; /* Allowed tuner modes */
- void *config; /* configuraion for more complex tuners */
- int (*tuner_callback) (void *dev, int component, int cmd, int arg);
+ unsigned short addr;
+ unsigned int type;
+ unsigned int mode_mask;
+ void *config;
+ int (*tuner_callback)(void *dev, int component, int cmd, int arg);
};
#endif /* __KERNEL__ */
diff --git a/include/media/tveeprom.h b/include/media/tveeprom.h
index f7119ee3977b..8be898739e0c 100644
--- a/include/media/tveeprom.h
+++ b/include/media/tveeprom.h
@@ -1,28 +1,63 @@
+
/*
+ * tveeprom - Contains structures and functions to work with Hauppauge
+ * eeproms.
*/
+#include <linux/if_ether.h>
+
+/**
+ * enum tveeprom_audio_processor - Specifies the type of audio processor
+ * used on a Hauppauge device.
+ *
+ * @TVEEPROM_AUDPROC_NONE: No audio processor present
+ * @TVEEPROM_AUDPROC_INTERNAL: The audio processor is internal to the
+ * video processor
+ * @TVEEPROM_AUDPROC_MSP: The audio processor is a MSPXXXX device
+ * @TVEEPROM_AUDPROC_OTHER: The audio processor is another device
+ */
enum tveeprom_audio_processor {
- /* No audio processor present */
TVEEPROM_AUDPROC_NONE,
- /* The audio processor is internal to the video processor */
TVEEPROM_AUDPROC_INTERNAL,
- /* The audio processor is a MSPXXXX device */
TVEEPROM_AUDPROC_MSP,
- /* The audio processor is another device */
TVEEPROM_AUDPROC_OTHER,
};
-#include <linux/if_ether.h>
-
+/**
+ * struct tveeprom - Contains the fields parsed from Hauppauge eeproms
+ *
+ * @has_radio: 1 if the device has radio; 0 otherwise.
+ * @has_ir: If has_ir == 0, then it is unknown what the IR
+ * capabilities are. Otherwise:
+ * bit 0) 1 (= IR capabilities are known);
+ * bit 1) IR receiver present;
+ * bit 2) IR transmitter (blaster) present.
+ * @has_MAC_address: 0: no MAC, 1: MAC present, 2: unknown.
+ * @tuner_type: type of the tuner (TUNER_*, as defined at
+ * include/media/tuner.h).
+ * @tuner_formats: Supported analog TV standards (V4L2_STD_*).
+ * @tuner_hauppauge_model: Hauppauge's code for the device model number.
+ * @tuner2_type: type of the second tuner (TUNER_*, as defined
+ * at include/media/tuner.h).
+ * @tuner2_formats: Tuner 2 supported analog TV standards
+ * (V4L2_STD_*).
+ * @tuner2_hauppauge_model: tuner 2 Hauppauge's code for the device model
+ * number.
+ * @audio_processor: analog audio decoder, as defined by enum
+ * tveeprom_audio_processor.
+ * @decoder_processor: Hauppauge's code for the decoder chipset.
+ * Unused by the drivers, as they probe the
+ * decoder based on the PCI or USB ID.
+ * @model: Hauppauge's model number
+ * @revision: Card revision number
+ * @serial_number: Card's serial number
+ * @rev_str: Card revision converted to number
+ * @MAC_address: MAC address for the network interface
+ */
struct tveeprom {
u32 has_radio;
- /* If has_ir == 0, then it is unknown what the IR capabilities are,
- otherwise:
- bit 0: 1 (= IR capabilities are known)
- bit 1: IR receiver present
- bit 2: IR transmitter (blaster) present */
u32 has_ir;
- u32 has_MAC_address; /* 0: no MAC, 1: MAC present, 2: unknown */
+ u32 has_MAC_address;
u32 tuner_type;
u32 tuner_formats;
@@ -32,9 +67,6 @@ struct tveeprom {
u32 tuner2_formats;
u32 tuner2_hauppauge_model;
- u32 digitizer;
- u32 digitizer_formats;
-
u32 audio_processor;
u32 decoder_processor;
@@ -45,7 +77,28 @@ struct tveeprom {
u8 MAC_address[ETH_ALEN];
};
+/**
+ * tveeprom_hauppauge_analog - Fill struct tveeprom using the contents
+ * of the eeprom previously filled at
+ * @eeprom_data field.
+ *
+ * @c: I2C client struct
+ * @tvee: Struct to where the eeprom parsed data will be filled;
+ * @eeprom_data: Array with the contents of the eeprom_data. It should
+ * contain 256 bytes filled with the contents of the
+ * eeprom read from the Hauppauge device.
+ */
void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee,
unsigned char *eeprom_data);
+/**
+ * tveeprom_read - Reads the contents of the eeprom found at the Hauppauge
+ * devices.
+ *
+ * @c: I2C client struct
+ * @eedata: Array where the eeprom content will be stored.
+ * @len: Size of @eedata array. If the eeprom content will be latter
+ * be parsed by tveeprom_hauppauge_analog(), len should be, at
+ * least, 256.
+ */
int tveeprom_read(struct i2c_client *c, unsigned char *eedata, int len);
diff --git a/include/media/v4l2-dv-timings.h b/include/media/v4l2-dv-timings.h
index b6130b50a0f1..a209526b6014 100644
--- a/include/media/v4l2-dv-timings.h
+++ b/include/media/v4l2-dv-timings.h
@@ -23,7 +23,7 @@
#include <linux/videodev2.h>
-/**
+/*
* v4l2_dv_timings_presets: list of all dv_timings presets.
*/
extern const struct v4l2_dv_timings v4l2_dv_timings_presets[];
@@ -127,16 +127,16 @@ void v4l2_print_dv_timings(const char *dev_prefix, const char *prefix,
/**
* v4l2_detect_cvt - detect if the given timings follow the CVT standard
*
- * @frame_height - the total height of the frame (including blanking) in lines.
- * @hfreq - the horizontal frequency in Hz.
- * @vsync - the height of the vertical sync in lines.
- * @active_width - active width of image (does not include blanking). This
+ * @frame_height: the total height of the frame (including blanking) in lines.
+ * @hfreq: the horizontal frequency in Hz.
+ * @vsync: the height of the vertical sync in lines.
+ * @active_width: active width of image (does not include blanking). This
* information is needed only in case of version 2 of reduced blanking.
* In other cases, this parameter does not have any effect on timings.
- * @polarities - the horizontal and vertical polarities (same as struct
+ * @polarities: the horizontal and vertical polarities (same as struct
* v4l2_bt_timings polarities).
- * @interlaced - if this flag is true, it indicates interlaced format
- * @fmt - the resulting timings.
+ * @interlaced: if this flag is true, it indicates interlaced format
+ * @fmt: the resulting timings.
*
* This function will attempt to detect if the given values correspond to a
* valid CVT format. If so, then it will return true, and fmt will be filled
@@ -149,18 +149,18 @@ bool v4l2_detect_cvt(unsigned frame_height, unsigned hfreq, unsigned vsync,
/**
* v4l2_detect_gtf - detect if the given timings follow the GTF standard
*
- * @frame_height - the total height of the frame (including blanking) in lines.
- * @hfreq - the horizontal frequency in Hz.
- * @vsync - the height of the vertical sync in lines.
- * @polarities - the horizontal and vertical polarities (same as struct
+ * @frame_height: the total height of the frame (including blanking) in lines.
+ * @hfreq: the horizontal frequency in Hz.
+ * @vsync: the height of the vertical sync in lines.
+ * @polarities: the horizontal and vertical polarities (same as struct
* v4l2_bt_timings polarities).
- * @interlaced - if this flag is true, it indicates interlaced format
- * @aspect - preferred aspect ratio. GTF has no method of determining the
+ * @interlaced: if this flag is true, it indicates interlaced format
+ * @aspect: preferred aspect ratio. GTF has no method of determining the
* aspect ratio in order to derive the image width from the
* image height, so it has to be passed explicitly. Usually
* the native screen aspect ratio is used for this. If it
* is not filled in correctly, then 16:9 will be assumed.
- * @fmt - the resulting timings.
+ * @fmt: the resulting timings.
*
* This function will attempt to detect if the given values correspond to a
* valid GTF format. If so, then it will return true, and fmt will be filled
@@ -174,8 +174,8 @@ bool v4l2_detect_gtf(unsigned frame_height, unsigned hfreq, unsigned vsync,
* v4l2_calc_aspect_ratio - calculate the aspect ratio based on bytes
* 0x15 and 0x16 from the EDID.
*
- * @hor_landscape - byte 0x15 from the EDID.
- * @vert_portrait - byte 0x16 from the EDID.
+ * @hor_landscape: byte 0x15 from the EDID.
+ * @vert_portrait: byte 0x16 from the EDID.
*
* Determines the aspect ratio from the EDID.
* See VESA Enhanced EDID standard, release A, rev 2, section 3.6.2:
diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h
index 8fbbd76d78e8..017ffb2220c7 100644
--- a/include/media/v4l2-ioctl.h
+++ b/include/media/v4l2-ioctl.h
@@ -36,6 +36,8 @@ struct v4l2_ioctl_ops {
struct v4l2_fmtdesc *f);
int (*vidioc_enum_fmt_sdr_cap) (struct file *file, void *fh,
struct v4l2_fmtdesc *f);
+ int (*vidioc_enum_fmt_sdr_out) (struct file *file, void *fh,
+ struct v4l2_fmtdesc *f);
/* VIDIOC_G_FMT handlers */
int (*vidioc_g_fmt_vid_cap) (struct file *file, void *fh,
@@ -60,6 +62,8 @@ struct v4l2_ioctl_ops {
struct v4l2_format *f);
int (*vidioc_g_fmt_sdr_cap) (struct file *file, void *fh,
struct v4l2_format *f);
+ int (*vidioc_g_fmt_sdr_out) (struct file *file, void *fh,
+ struct v4l2_format *f);
/* VIDIOC_S_FMT handlers */
int (*vidioc_s_fmt_vid_cap) (struct file *file, void *fh,
@@ -84,6 +88,8 @@ struct v4l2_ioctl_ops {
struct v4l2_format *f);
int (*vidioc_s_fmt_sdr_cap) (struct file *file, void *fh,
struct v4l2_format *f);
+ int (*vidioc_s_fmt_sdr_out) (struct file *file, void *fh,
+ struct v4l2_format *f);
/* VIDIOC_TRY_FMT handlers */
int (*vidioc_try_fmt_vid_cap) (struct file *file, void *fh,
@@ -108,6 +114,8 @@ struct v4l2_ioctl_ops {
struct v4l2_format *f);
int (*vidioc_try_fmt_sdr_cap) (struct file *file, void *fh,
struct v4l2_format *f);
+ int (*vidioc_try_fmt_sdr_out) (struct file *file, void *fh,
+ struct v4l2_format *f);
/* Buffer handlers */
int (*vidioc_reqbufs) (struct file *file, void *fh, struct v4l2_requestbuffers *b);
diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h
index 8849aaba6aa5..5a9597dd1ee0 100644
--- a/include/media/v4l2-mem2mem.h
+++ b/include/media/v4l2-mem2mem.h
@@ -17,7 +17,7 @@
#ifndef _MEDIA_V4L2_MEM2MEM_H
#define _MEDIA_V4L2_MEM2MEM_H
-#include <media/videobuf2-core.h>
+#include <media/videobuf2-v4l2.h>
/**
* struct v4l2_m2m_ops - mem-to-mem device driver callbacks
@@ -90,7 +90,7 @@ struct v4l2_m2m_ctx {
};
struct v4l2_m2m_buffer {
- struct vb2_buffer vb;
+ struct vb2_v4l2_buffer vb;
struct list_head list;
};
@@ -105,9 +105,9 @@ void v4l2_m2m_job_finish(struct v4l2_m2m_dev *m2m_dev,
struct v4l2_m2m_ctx *m2m_ctx);
static inline void
-v4l2_m2m_buf_done(struct vb2_buffer *buf, enum vb2_buffer_state state)
+v4l2_m2m_buf_done(struct vb2_v4l2_buffer *buf, enum vb2_buffer_state state)
{
- vb2_buffer_done(buf, state);
+ vb2_buffer_done(&buf->vb2_buf, state);
}
int v4l2_m2m_reqbufs(struct file *file, struct v4l2_m2m_ctx *m2m_ctx,
@@ -160,7 +160,8 @@ static inline void v4l2_m2m_set_dst_buffered(struct v4l2_m2m_ctx *m2m_ctx,
void v4l2_m2m_ctx_release(struct v4l2_m2m_ctx *m2m_ctx);
-void v4l2_m2m_buf_queue(struct v4l2_m2m_ctx *m2m_ctx, struct vb2_buffer *vb);
+void v4l2_m2m_buf_queue(struct v4l2_m2m_ctx *m2m_ctx,
+ struct vb2_v4l2_buffer *vbuf);
/**
* v4l2_m2m_num_src_bufs_ready() - return the number of source buffers ready for
diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h
index 589b56c68400..647ebfe5174f 100644
--- a/include/media/videobuf2-core.h
+++ b/include/media/videobuf2-core.h
@@ -1,5 +1,5 @@
/*
- * videobuf2-core.h - V4L2 driver helper framework
+ * videobuf2-core.h - Video Buffer 2 Core Framework
*
* Copyright (C) 2010 Samsung Electronics
*
@@ -15,9 +15,18 @@
#include <linux/mm_types.h>
#include <linux/mutex.h>
#include <linux/poll.h>
-#include <linux/videodev2.h>
#include <linux/dma-buf.h>
+#define VB2_MAX_FRAME (32)
+#define VB2_MAX_PLANES (8)
+
+enum vb2_memory {
+ VB2_MEMORY_UNKNOWN = 0,
+ VB2_MEMORY_MMAP = 1,
+ VB2_MEMORY_USERPTR = 2,
+ VB2_MEMORY_DMABUF = 4,
+};
+
struct vb2_alloc_ctx;
struct vb2_fileio_data;
struct vb2_threadio_data;
@@ -36,6 +45,8 @@ struct vb2_threadio_data;
* no other users of this buffer are present); the buf_priv
* argument is the allocator private per-buffer structure
* previously returned from the alloc callback.
+ * @get_dmabuf: acquire userspace memory for a hardware operation; used for
+ * DMABUF memory types.
* @get_userptr: acquire userspace memory for a hardware operation; used for
* USERPTR memory types; vaddr is the address passed to the
* videobuf layer when queuing a video buffer of USERPTR type;
@@ -111,10 +122,40 @@ struct vb2_mem_ops {
int (*mmap)(void *buf_priv, struct vm_area_struct *vma);
};
+/**
+ * struct vb2_plane - plane information
+ * @mem_priv: private data with this plane
+ * @dbuf: dma_buf - shared buffer object
+ * @dbuf_mapped: flag to show whether dbuf is mapped or not
+ * @bytesused: number of bytes occupied by data in the plane (payload)
+ * @length: size of this plane (NOT the payload) in bytes
+ * @offset: when memory in the associated struct vb2_buffer is
+ * VB2_MEMORY_MMAP, equals the offset from the start of
+ * the device memory for this plane (or is a "cookie" that
+ * should be passed to mmap() called on the video node)
+ * @userptr: when memory is VB2_MEMORY_USERPTR, a userspace pointer
+ * pointing to this plane
+ * @fd: when memory is VB2_MEMORY_DMABUF, a userspace file
+ * descriptor associated with this plane
+ * @m: Union with memtype-specific data (@offset, @userptr or
+ * @fd).
+ * @data_offset: offset in the plane to the start of data; usually 0,
+ * unless there is a header in front of the data
+ * Should contain enough information to be able to cover all the fields
+ * of struct v4l2_plane at videodev2.h
+ */
struct vb2_plane {
void *mem_priv;
struct dma_buf *dbuf;
unsigned int dbuf_mapped;
+ unsigned int bytesused;
+ unsigned int length;
+ union {
+ unsigned int offset;
+ unsigned long userptr;
+ int fd;
+ } m;
+ unsigned int data_offset;
};
/**
@@ -163,43 +204,34 @@ struct vb2_queue;
/**
* struct vb2_buffer - represents a video buffer
- * @v4l2_buf: struct v4l2_buffer associated with this buffer; can
- * be read by the driver and relevant entries can be
- * changed by the driver in case of CAPTURE types
- * (such as timestamp)
- * @v4l2_planes: struct v4l2_planes associated with this buffer; can
- * be read by the driver and relevant entries can be
- * changed by the driver in case of CAPTURE types
- * (such as bytesused); NOTE that even for single-planar
- * types, the v4l2_planes[0] struct should be used
- * instead of v4l2_buf for filling bytesused - drivers
- * should use the vb2_set_plane_payload() function for that
* @vb2_queue: the queue to which this driver belongs
+ * @index: id number of the buffer
+ * @type: buffer type
+ * @memory: the method, in which the actual data is passed
* @num_planes: number of planes in the buffer
* on an internal driver queue
- * @state: current buffer state; do not change
- * @queued_entry: entry on the queued buffers list, which holds all
- * buffers queued from userspace
- * @done_entry: entry on the list that stores all buffers ready to
- * be dequeued to userspace
* @planes: private per-plane information; do not change
*/
struct vb2_buffer {
- struct v4l2_buffer v4l2_buf;
- struct v4l2_plane v4l2_planes[VIDEO_MAX_PLANES];
-
struct vb2_queue *vb2_queue;
-
+ unsigned int index;
+ unsigned int type;
+ unsigned int memory;
unsigned int num_planes;
-
-/* Private: internal use only */
+ struct vb2_plane planes[VB2_MAX_PLANES];
+
+ /* private: internal use only
+ *
+ * state: current buffer state; do not change
+ * queued_entry: entry on the queued buffers list, which holds
+ * all buffers queued from userspace
+ * done_entry: entry on the list that stores all buffers ready
+ * to be dequeued to userspace
+ */
enum vb2_buffer_state state;
struct list_head queued_entry;
struct list_head done_entry;
-
- struct vb2_plane planes[VIDEO_MAX_PLANES];
-
#ifdef CONFIG_VIDEO_ADV_DEBUG
/*
* Counters for how often these buffer-related ops are
@@ -312,7 +344,7 @@ struct vb2_buffer {
* pre-queued buffers before calling STREAMON.
*/
struct vb2_ops {
- int (*queue_setup)(struct vb2_queue *q, const struct v4l2_format *fmt,
+ int (*queue_setup)(struct vb2_queue *q, const void *parg,
unsigned int *num_buffers, unsigned int *num_planes,
unsigned int sizes[], void *alloc_ctxs[]);
@@ -330,12 +362,19 @@ struct vb2_ops {
void (*buf_queue)(struct vb2_buffer *vb);
};
-struct v4l2_fh;
+struct vb2_buf_ops {
+ int (*fill_user_buffer)(struct vb2_buffer *vb, void *pb);
+ int (*fill_vb2_buffer)(struct vb2_buffer *vb, const void *pb,
+ struct vb2_plane *planes);
+ int (*set_timestamp)(struct vb2_buffer *vb, const void *pb);
+};
/**
* struct vb2_queue - a videobuf queue
*
- * @type: queue type (see V4L2_BUF_TYPE_* in linux/videodev2.h
+ * @type: private buffer type whose content is defined by the vb2-core
+ * caller. For example, for V4L2, it should match
+ * the V4L2_BUF_TYPE_* in include/uapi/linux/videodev2.h
* @io_modes: supported io methods (see vb2_io_modes enum)
* @fileio_read_once: report EOF after reading the first buffer
* @fileio_write_immediately: queue buffer after each write() call
@@ -351,10 +390,13 @@ struct v4l2_fh;
* drivers to easily associate an owner filehandle with the queue.
* @ops: driver-specific callbacks
* @mem_ops: memory allocator specific callbacks
+ * @buf_ops: callbacks to deliver buffer information
+ * between user-space and kernel-space
* @drv_priv: driver private data
* @buf_struct_size: size of the driver-specific buffer structure;
* "0" indicates the driver doesn't want to use a custom buffer
- * structure type, so sizeof(struct vb2_buffer) will is used
+ * structure type. for example, sizeof(struct vb2_v4l2_buffer)
+ * will be used for v4l2.
* @timestamp_flags: Timestamp flags; V4L2_BUF_FLAG_TIMESTAMP_* and
* V4L2_BUF_FLAG_TSTAMP_SRC_*
* @gfp_flags: additional gfp flags used when allocating the buffers.
@@ -385,6 +427,8 @@ struct v4l2_fh;
* @waiting_for_buffers: used in poll() to check if vb2 is still waiting for
* buffers. Only set for capture queues if qbuf has not yet been
* called since poll() needs to return POLLERR in that situation.
+ * @is_multiplanar: set if buffer type is multiplanar
+ * @is_output: set if buffer type is output
* @last_buffer_dequeued: used in poll() and DQBUF to immediately return if the
* last decoded buffer was already dequeued. Set for capture queues
* when a buffer with the V4L2_BUF_FLAG_LAST is dequeued.
@@ -392,17 +436,19 @@ struct v4l2_fh;
* @threadio: thread io internal data, used only if thread is active
*/
struct vb2_queue {
- enum v4l2_buf_type type;
+ unsigned int type;
unsigned int io_modes;
unsigned fileio_read_once:1;
unsigned fileio_write_immediately:1;
unsigned allow_zero_bytesused:1;
struct mutex *lock;
- struct v4l2_fh *owner;
+ void *owner;
const struct vb2_ops *ops;
const struct vb2_mem_ops *mem_ops;
+ const struct vb2_buf_ops *buf_ops;
+
void *drv_priv;
unsigned int buf_struct_size;
u32 timestamp_flags;
@@ -411,8 +457,8 @@ struct vb2_queue {
/* private: internal use only */
struct mutex mmap_lock;
- enum v4l2_memory memory;
- struct vb2_buffer *bufs[VIDEO_MAX_FRAME];
+ unsigned int memory;
+ struct vb2_buffer *bufs[VB2_MAX_FRAME];
unsigned int num_buffers;
struct list_head queued_list;
@@ -423,13 +469,15 @@ struct vb2_queue {
spinlock_t done_lock;
wait_queue_head_t done_wq;
- void *alloc_ctx[VIDEO_MAX_PLANES];
- unsigned int plane_sizes[VIDEO_MAX_PLANES];
+ void *alloc_ctx[VB2_MAX_PLANES];
+ unsigned int plane_sizes[VB2_MAX_PLANES];
unsigned int streaming:1;
unsigned int start_streaming_called:1;
unsigned int error:1;
unsigned int waiting_for_buffers:1;
+ unsigned int is_multiplanar:1;
+ unsigned int is_output:1;
unsigned int last_buffer_dequeued:1;
struct vb2_fileio_data *fileio;
@@ -455,23 +503,25 @@ void vb2_buffer_done(struct vb2_buffer *vb, enum vb2_buffer_state state);
void vb2_discard_done(struct vb2_queue *q);
int vb2_wait_for_all_buffers(struct vb2_queue *q);
-int vb2_querybuf(struct vb2_queue *q, struct v4l2_buffer *b);
-int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req);
+int vb2_core_querybuf(struct vb2_queue *q, unsigned int index, void *pb);
+int vb2_core_reqbufs(struct vb2_queue *q, enum vb2_memory memory,
+ unsigned int *count);
+int vb2_core_create_bufs(struct vb2_queue *q, enum vb2_memory memory,
+ unsigned int *count, const void *parg);
+int vb2_core_prepare_buf(struct vb2_queue *q, unsigned int index, void *pb);
+int vb2_core_qbuf(struct vb2_queue *q, unsigned int index, void *pb);
+int vb2_core_dqbuf(struct vb2_queue *q, void *pb, bool nonblocking);
-int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create);
-int vb2_prepare_buf(struct vb2_queue *q, struct v4l2_buffer *b);
+int vb2_core_streamon(struct vb2_queue *q, unsigned int type);
+int vb2_core_streamoff(struct vb2_queue *q, unsigned int type);
-int __must_check vb2_queue_init(struct vb2_queue *q);
-
-void vb2_queue_release(struct vb2_queue *q);
-void vb2_queue_error(struct vb2_queue *q);
+int vb2_core_expbuf(struct vb2_queue *q, int *fd, unsigned int type,
+ unsigned int index, unsigned int plane, unsigned int flags);
-int vb2_qbuf(struct vb2_queue *q, struct v4l2_buffer *b);
-int vb2_expbuf(struct vb2_queue *q, struct v4l2_exportbuffer *eb);
-int vb2_dqbuf(struct vb2_queue *q, struct v4l2_buffer *b, bool nonblocking);
+int vb2_core_queue_init(struct vb2_queue *q);
+void vb2_core_queue_release(struct vb2_queue *q);
-int vb2_streamon(struct vb2_queue *q, enum v4l2_buf_type type);
-int vb2_streamoff(struct vb2_queue *q, enum v4l2_buf_type type);
+void vb2_queue_error(struct vb2_queue *q);
int vb2_mmap(struct vb2_queue *q, struct vm_area_struct *vma);
#ifndef CONFIG_MMU
@@ -481,41 +531,6 @@ unsigned long vb2_get_unmapped_area(struct vb2_queue *q,
unsigned long pgoff,
unsigned long flags);
#endif
-unsigned int vb2_poll(struct vb2_queue *q, struct file *file, poll_table *wait);
-size_t vb2_read(struct vb2_queue *q, char __user *data, size_t count,
- loff_t *ppos, int nonblock);
-size_t vb2_write(struct vb2_queue *q, const char __user *data, size_t count,
- loff_t *ppos, int nonblock);
-
-/*
- * vb2_thread_fnc - callback function for use with vb2_thread
- *
- * This is called whenever a buffer is dequeued in the thread.
- */
-typedef int (*vb2_thread_fnc)(struct vb2_buffer *vb, void *priv);
-
-/**
- * vb2_thread_start() - start a thread for the given queue.
- * @q: videobuf queue
- * @fnc: callback function
- * @priv: priv pointer passed to the callback function
- * @thread_name:the name of the thread. This will be prefixed with "vb2-".
- *
- * This starts a thread that will queue and dequeue until an error occurs
- * or @vb2_thread_stop is called.
- *
- * This function should not be used for anything else but the videobuf2-dvb
- * support. If you think you have another good use-case for this, then please
- * contact the linux-media mailinglist first.
- */
-int vb2_thread_start(struct vb2_queue *q, vb2_thread_fnc fnc, void *priv,
- const char *thread_name);
-
-/**
- * vb2_thread_stop() - stop the thread for the given queue.
- * @q: videobuf queue
- */
-int vb2_thread_stop(struct vb2_queue *q);
/**
* vb2_is_streaming() - return streaming status of the queue
@@ -573,7 +588,7 @@ static inline void vb2_set_plane_payload(struct vb2_buffer *vb,
unsigned int plane_no, unsigned long size)
{
if (plane_no < vb->num_planes)
- vb->v4l2_planes[plane_no].bytesused = size;
+ vb->planes[plane_no].bytesused = size;
}
/**
@@ -585,7 +600,7 @@ static inline unsigned long vb2_get_plane_payload(struct vb2_buffer *vb,
unsigned int plane_no)
{
if (plane_no < vb->num_planes)
- return vb->v4l2_planes[plane_no].bytesused;
+ return vb->planes[plane_no].bytesused;
return 0;
}
@@ -598,7 +613,7 @@ static inline unsigned long
vb2_plane_size(struct vb2_buffer *vb, unsigned int plane_no)
{
if (plane_no < vb->num_planes)
- return vb->v4l2_planes[plane_no].length;
+ return vb->planes[plane_no].length;
return 0;
}
@@ -620,48 +635,4 @@ static inline void vb2_clear_last_buffer_dequeued(struct vb2_queue *q)
q->last_buffer_dequeued = false;
}
-/*
- * The following functions are not part of the vb2 core API, but are simple
- * helper functions that you can use in your struct v4l2_file_operations,
- * struct v4l2_ioctl_ops and struct vb2_ops. They will serialize if vb2_queue->lock
- * or video_device->lock is set, and they will set and test vb2_queue->owner
- * to check if the calling filehandle is permitted to do the queuing operation.
- */
-
-/* struct v4l2_ioctl_ops helpers */
-
-int vb2_ioctl_reqbufs(struct file *file, void *priv,
- struct v4l2_requestbuffers *p);
-int vb2_ioctl_create_bufs(struct file *file, void *priv,
- struct v4l2_create_buffers *p);
-int vb2_ioctl_prepare_buf(struct file *file, void *priv,
- struct v4l2_buffer *p);
-int vb2_ioctl_querybuf(struct file *file, void *priv, struct v4l2_buffer *p);
-int vb2_ioctl_qbuf(struct file *file, void *priv, struct v4l2_buffer *p);
-int vb2_ioctl_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p);
-int vb2_ioctl_streamon(struct file *file, void *priv, enum v4l2_buf_type i);
-int vb2_ioctl_streamoff(struct file *file, void *priv, enum v4l2_buf_type i);
-int vb2_ioctl_expbuf(struct file *file, void *priv,
- struct v4l2_exportbuffer *p);
-
-/* struct v4l2_file_operations helpers */
-
-int vb2_fop_mmap(struct file *file, struct vm_area_struct *vma);
-int vb2_fop_release(struct file *file);
-int _vb2_fop_release(struct file *file, struct mutex *lock);
-ssize_t vb2_fop_write(struct file *file, const char __user *buf,
- size_t count, loff_t *ppos);
-ssize_t vb2_fop_read(struct file *file, char __user *buf,
- size_t count, loff_t *ppos);
-unsigned int vb2_fop_poll(struct file *file, poll_table *wait);
-#ifndef CONFIG_MMU
-unsigned long vb2_fop_get_unmapped_area(struct file *file, unsigned long addr,
- unsigned long len, unsigned long pgoff, unsigned long flags);
-#endif
-
-/* struct vb2_ops helpers, only use if vq->lock is non-NULL. */
-
-void vb2_ops_wait_prepare(struct vb2_queue *vq);
-void vb2_ops_wait_finish(struct vb2_queue *vq);
-
#endif /* _MEDIA_VIDEOBUF2_CORE_H */
diff --git a/include/media/videobuf2-dma-contig.h b/include/media/videobuf2-dma-contig.h
index 8197f87d6c61..c33dfa69d7ab 100644
--- a/include/media/videobuf2-dma-contig.h
+++ b/include/media/videobuf2-dma-contig.h
@@ -13,7 +13,7 @@
#ifndef _MEDIA_VIDEOBUF2_DMA_CONTIG_H
#define _MEDIA_VIDEOBUF2_DMA_CONTIG_H
-#include <media/videobuf2-core.h>
+#include <media/videobuf2-v4l2.h>
#include <linux/dma-mapping.h>
static inline dma_addr_t
diff --git a/include/media/videobuf2-dma-sg.h b/include/media/videobuf2-dma-sg.h
index 14ce3068b642..8d1083f83c3d 100644
--- a/include/media/videobuf2-dma-sg.h
+++ b/include/media/videobuf2-dma-sg.h
@@ -13,7 +13,7 @@
#ifndef _MEDIA_VIDEOBUF2_DMA_SG_H
#define _MEDIA_VIDEOBUF2_DMA_SG_H
-#include <media/videobuf2-core.h>
+#include <media/videobuf2-v4l2.h>
static inline struct sg_table *vb2_dma_sg_plane_desc(
struct vb2_buffer *vb, unsigned int plane_no)
diff --git a/include/media/videobuf2-dvb.h b/include/media/videobuf2-dvb.h
index 8f61456f1394..5b64c9eac2c9 100644
--- a/include/media/videobuf2-dvb.h
+++ b/include/media/videobuf2-dvb.h
@@ -6,7 +6,13 @@
#include <dvb_demux.h>
#include <dvb_net.h>
#include <dvb_frontend.h>
-#include <media/videobuf2-core.h>
+
+#include <media/videobuf2-v4l2.h>
+/*
+ * TODO: This header file should be replaced with videobuf2-core.h
+ * Currently, vb2_thread is not a stuff of videobuf2-core,
+ * since vb2_thread has many dependencies on videobuf2-v4l2.
+ */
struct vb2_dvb {
/* filling that the job of the driver */
diff --git a/include/media/videobuf2-memops.h b/include/media/videobuf2-memops.h
index 6513c7ec3116..36565c7acb54 100644
--- a/include/media/videobuf2-memops.h
+++ b/include/media/videobuf2-memops.h
@@ -14,7 +14,7 @@
#ifndef _MEDIA_VIDEOBUF2_MEMOPS_H
#define _MEDIA_VIDEOBUF2_MEMOPS_H
-#include <media/videobuf2-core.h>
+#include <media/videobuf2-v4l2.h>
#include <linux/mm.h>
/**
diff --git a/include/media/videobuf2-v4l2.h b/include/media/videobuf2-v4l2.h
new file mode 100644
index 000000000000..5abab1e7c7e8
--- /dev/null
+++ b/include/media/videobuf2-v4l2.h
@@ -0,0 +1,149 @@
+/*
+ * videobuf2-v4l2.h - V4L2 driver helper framework
+ *
+ * Copyright (C) 2010 Samsung Electronics
+ *
+ * Author: Pawel Osciak <pawel@osciak.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ */
+#ifndef _MEDIA_VIDEOBUF2_V4L2_H
+#define _MEDIA_VIDEOBUF2_V4L2_H
+
+#include <linux/videodev2.h>
+#include <media/videobuf2-core.h>
+
+#if VB2_MAX_FRAME != VIDEO_MAX_FRAME
+#error VB2_MAX_FRAME != VIDEO_MAX_FRAME
+#endif
+
+#if VB2_MAX_PLANES != VIDEO_MAX_PLANES
+#error VB2_MAX_PLANES != VIDEO_MAX_PLANES
+#endif
+
+/**
+ * struct vb2_v4l2_buffer - video buffer information for v4l2
+ * @vb2_buf: video buffer 2
+ * @flags: buffer informational flags
+ * @field: enum v4l2_field; field order of the image in the buffer
+ * @timestamp: frame timestamp
+ * @timecode: frame timecode
+ * @sequence: sequence count of this frame
+ * Should contain enough information to be able to cover all the fields
+ * of struct v4l2_buffer at videodev2.h
+ */
+struct vb2_v4l2_buffer {
+ struct vb2_buffer vb2_buf;
+
+ __u32 flags;
+ __u32 field;
+ struct timeval timestamp;
+ struct v4l2_timecode timecode;
+ __u32 sequence;
+};
+
+/*
+ * to_vb2_v4l2_buffer() - cast struct vb2_buffer * to struct vb2_v4l2_buffer *
+ */
+#define to_vb2_v4l2_buffer(vb) \
+ container_of(vb, struct vb2_v4l2_buffer, vb2_buf)
+
+int vb2_querybuf(struct vb2_queue *q, struct v4l2_buffer *b);
+int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req);
+
+int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create);
+int vb2_prepare_buf(struct vb2_queue *q, struct v4l2_buffer *b);
+
+int vb2_qbuf(struct vb2_queue *q, struct v4l2_buffer *b);
+int vb2_expbuf(struct vb2_queue *q, struct v4l2_exportbuffer *eb);
+int vb2_dqbuf(struct vb2_queue *q, struct v4l2_buffer *b, bool nonblocking);
+
+int vb2_streamon(struct vb2_queue *q, enum v4l2_buf_type type);
+int vb2_streamoff(struct vb2_queue *q, enum v4l2_buf_type type);
+
+int __must_check vb2_queue_init(struct vb2_queue *q);
+void vb2_queue_release(struct vb2_queue *q);
+
+unsigned int vb2_poll(struct vb2_queue *q, struct file *file, poll_table *wait);
+size_t vb2_read(struct vb2_queue *q, char __user *data, size_t count,
+ loff_t *ppos, int nonblock);
+size_t vb2_write(struct vb2_queue *q, const char __user *data, size_t count,
+ loff_t *ppos, int nonblock);
+
+/*
+ * vb2_thread_fnc - callback function for use with vb2_thread
+ *
+ * This is called whenever a buffer is dequeued in the thread.
+ */
+typedef int (*vb2_thread_fnc)(struct vb2_buffer *vb, void *priv);
+
+/**
+ * vb2_thread_start() - start a thread for the given queue.
+ * @q: videobuf queue
+ * @fnc: callback function
+ * @priv: priv pointer passed to the callback function
+ * @thread_name:the name of the thread. This will be prefixed with "vb2-".
+ *
+ * This starts a thread that will queue and dequeue until an error occurs
+ * or @vb2_thread_stop is called.
+ *
+ * This function should not be used for anything else but the videobuf2-dvb
+ * support. If you think you have another good use-case for this, then please
+ * contact the linux-media mailinglist first.
+ */
+int vb2_thread_start(struct vb2_queue *q, vb2_thread_fnc fnc, void *priv,
+ const char *thread_name);
+
+/**
+ * vb2_thread_stop() - stop the thread for the given queue.
+ * @q: videobuf queue
+ */
+int vb2_thread_stop(struct vb2_queue *q);
+
+/*
+ * The following functions are not part of the vb2 core API, but are simple
+ * helper functions that you can use in your struct v4l2_file_operations,
+ * struct v4l2_ioctl_ops and struct vb2_ops. They will serialize if vb2_queue->lock
+ * or video_device->lock is set, and they will set and test vb2_queue->owner
+ * to check if the calling filehandle is permitted to do the queuing operation.
+ */
+
+/* struct v4l2_ioctl_ops helpers */
+
+int vb2_ioctl_reqbufs(struct file *file, void *priv,
+ struct v4l2_requestbuffers *p);
+int vb2_ioctl_create_bufs(struct file *file, void *priv,
+ struct v4l2_create_buffers *p);
+int vb2_ioctl_prepare_buf(struct file *file, void *priv,
+ struct v4l2_buffer *p);
+int vb2_ioctl_querybuf(struct file *file, void *priv, struct v4l2_buffer *p);
+int vb2_ioctl_qbuf(struct file *file, void *priv, struct v4l2_buffer *p);
+int vb2_ioctl_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p);
+int vb2_ioctl_streamon(struct file *file, void *priv, enum v4l2_buf_type i);
+int vb2_ioctl_streamoff(struct file *file, void *priv, enum v4l2_buf_type i);
+int vb2_ioctl_expbuf(struct file *file, void *priv,
+ struct v4l2_exportbuffer *p);
+
+/* struct v4l2_file_operations helpers */
+
+int vb2_fop_mmap(struct file *file, struct vm_area_struct *vma);
+int vb2_fop_release(struct file *file);
+int _vb2_fop_release(struct file *file, struct mutex *lock);
+ssize_t vb2_fop_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *ppos);
+ssize_t vb2_fop_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos);
+unsigned int vb2_fop_poll(struct file *file, poll_table *wait);
+#ifndef CONFIG_MMU
+unsigned long vb2_fop_get_unmapped_area(struct file *file, unsigned long addr,
+ unsigned long len, unsigned long pgoff, unsigned long flags);
+#endif
+
+/* struct vb2_ops helpers, only use if vq->lock is non-NULL. */
+
+void vb2_ops_wait_prepare(struct vb2_queue *vq);
+void vb2_ops_wait_finish(struct vb2_queue *vq);
+
+#endif /* _MEDIA_VIDEOBUF2_V4L2_H */
diff --git a/include/media/videobuf2-vmalloc.h b/include/media/videobuf2-vmalloc.h
index 93a76b43038d..a63fe662140a 100644
--- a/include/media/videobuf2-vmalloc.h
+++ b/include/media/videobuf2-vmalloc.h
@@ -13,7 +13,7 @@
#ifndef _MEDIA_VIDEOBUF2_VMALLOC_H
#define _MEDIA_VIDEOBUF2_VMALLOC_H
-#include <media/videobuf2-core.h>
+#include <media/videobuf2-v4l2.h>
extern const struct vb2_mem_ops vb2_vmalloc_memops;