summaryrefslogtreecommitdiff
path: root/include/net/bluetooth/hci.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/net/bluetooth/hci.h')
-rw-r--r--include/net/bluetooth/hci.h234
1 files changed, 103 insertions, 131 deletions
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 8701ca5f31ee..a8586c3058c7 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -1,7 +1,7 @@
/*
BlueZ - Bluetooth protocol stack for Linux
Copyright (C) 2000-2001 Qualcomm Incorporated
- Copyright 2023 NXP
+ Copyright 2023-2024 NXP
Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
@@ -29,13 +29,11 @@
#define HCI_MAX_ACL_SIZE 1024
#define HCI_MAX_SCO_SIZE 255
#define HCI_MAX_ISO_SIZE 251
+#define HCI_MAX_ISO_BIS 31
#define HCI_MAX_EVENT_SIZE 260
#define HCI_MAX_FRAME_SIZE (HCI_MAX_ACL_SIZE + 4)
#define HCI_LINK_KEY_SIZE 16
-#define HCI_AMP_LINK_KEY_SIZE (2 * HCI_LINK_KEY_SIZE)
-
-#define HCI_MAX_AMP_ASSOC_SIZE 672
#define HCI_MAX_CPB_DATA_SIZE 252
@@ -70,26 +68,7 @@
#define HCI_I2C 8
#define HCI_SMD 9
#define HCI_VIRTIO 10
-
-/* HCI controller types */
-#define HCI_PRIMARY 0x00
-#define HCI_AMP 0x01
-
-/* First BR/EDR Controller shall have ID = 0 */
-#define AMP_ID_BREDR 0x00
-
-/* AMP controller types */
-#define AMP_TYPE_BREDR 0x00
-#define AMP_TYPE_80211 0x01
-
-/* AMP controller status */
-#define AMP_STATUS_POWERED_DOWN 0x00
-#define AMP_STATUS_BLUETOOTH_ONLY 0x01
-#define AMP_STATUS_NO_CAPACITY 0x02
-#define AMP_STATUS_LOW_CAPACITY 0x03
-#define AMP_STATUS_MEDIUM_CAPACITY 0x04
-#define AMP_STATUS_HIGH_CAPACITY 0x05
-#define AMP_STATUS_FULL_CAPACITY 0x06
+#define HCI_IPC 11
/* HCI device quirks */
enum {
@@ -176,6 +155,15 @@ enum {
*/
HCI_QUIRK_USE_BDADDR_PROPERTY,
+ /* When this quirk is set, the Bluetooth Device Address provided by
+ * the 'local-bd-address' fwnode property is incorrectly specified in
+ * big-endian order.
+ *
+ * This quirk can be set before hci_register_dev is called or
+ * during the hdev->setup vendor callback.
+ */
+ HCI_QUIRK_BDADDR_PROPERTY_BROKEN,
+
/* When this quirk is set, the duplicate filtering during
* scanning is based on Bluetooth devices addresses. To allow
* RSSI based updates, restart scanning if needed.
@@ -220,14 +208,24 @@ enum {
*/
HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED,
- /* When this quirk is set, the controller has validated that
- * LE states reported through the HCI_LE_READ_SUPPORTED_STATES are
- * valid. This mechanism is necessary as many controllers have
- * been seen has having trouble initiating a connectable
- * advertisement despite the state combination being reported as
- * supported.
+ /* When this quirk is set consider Sync Flow Control as supported by
+ * the driver.
+ *
+ * This quirk must be set before hci_register_dev is called.
+ */
+ HCI_QUIRK_SYNC_FLOWCTL_SUPPORTED,
+
+ /* When this quirk is set, the LE states reported through the
+ * HCI_LE_READ_SUPPORTED_STATES are invalid/broken.
+ *
+ * This mechanism is necessary as many controllers have been seen has
+ * having trouble initiating a connectable advertisement despite the
+ * state combination being reported as supported.
+ *
+ * This quirk can be set before hci_register_dev is called or
+ * during the hdev->setup vendor callback.
*/
- HCI_QUIRK_VALID_LE_STATES,
+ HCI_QUIRK_BROKEN_LE_STATES,
/* When this quirk is set, then erroneous data reporting
* is ignored. This is mainly due to the fact that the HCI
@@ -311,6 +309,20 @@ enum {
*/
HCI_QUIRK_BROKEN_SET_RPA_TIMEOUT,
+ /*
+ * When this quirk is set, the HCI_OP_LE_EXT_CREATE_CONN command is
+ * disabled. This is required for the Actions Semiconductor ATS2851
+ * based controllers, which erroneously claims to support it.
+ */
+ HCI_QUIRK_BROKEN_EXT_CREATE_CONN,
+
+ /*
+ * When this quirk is set, the command WRITE_AUTH_PAYLOAD_TIMEOUT is
+ * skipped. This is required for the Actions Semiconductor ATS2851
+ * based controllers, due to a race condition in pairing process.
+ */
+ HCI_QUIRK_BROKEN_WRITE_AUTH_PAYLOAD_TIMEOUT,
+
/* When this quirk is set, MSFT extension monitor tracking by
* address filter is supported. Since tracking quantity of each
* pattern is limited, this feature supports tracking multiple
@@ -338,6 +350,33 @@ enum {
* claim to support it.
*/
HCI_QUIRK_BROKEN_READ_ENC_KEY_SIZE,
+
+ /*
+ * When this quirk is set, the reserved bits of Primary/Secondary_PHY
+ * inside the LE Extended Advertising Report events are discarded.
+ * This is required for some Apple/Broadcom controllers which
+ * abuse these reserved bits for unrelated flags.
+ *
+ * This quirk can be set before hci_register_dev is called or
+ * during the hdev->setup vendor callback.
+ */
+ HCI_QUIRK_FIXUP_LE_EXT_ADV_REPORT_PHY,
+
+ /* When this quirk is set, the HCI_OP_READ_VOICE_SETTING command is
+ * skipped. This is required for a subset of the CSR controller clones
+ * which erroneously claim to support it.
+ *
+ * This quirk must be set before hci_register_dev is called.
+ */
+ HCI_QUIRK_BROKEN_READ_VOICE_SETTING,
+
+ /* When this quirk is set, the HCI_OP_READ_PAGE_SCAN_TYPE command is
+ * skipped. This is required for a subset of the CSR controller clones
+ * which erroneously claim to support it.
+ *
+ * This quirk must be set before hci_register_dev is called.
+ */
+ HCI_QUIRK_BROKEN_READ_PAGE_SCAN_TYPE,
};
/* HCI device flags */
@@ -416,13 +455,13 @@ enum {
HCI_WIDEBAND_SPEECH_ENABLED,
HCI_EVENT_FILTER_CONFIGURED,
HCI_PA_SYNC,
+ HCI_SCO_FLOWCTL,
HCI_DUT_MODE,
HCI_VENDOR_DIAG,
HCI_FORCE_BREDR_SMP,
HCI_FORCE_STATIC_ADDR,
HCI_LL_RPA_RESOLUTION,
- HCI_ENABLE_LL_PRIVACY,
HCI_CMD_PENDING,
HCI_FORCE_NO_MITM,
HCI_QUALITY_REPORT,
@@ -447,7 +486,6 @@ enum {
#define HCI_AUTO_OFF_TIMEOUT msecs_to_jiffies(2000) /* 2 seconds */
#define HCI_ACL_CONN_TIMEOUT msecs_to_jiffies(20000) /* 20 seconds */
#define HCI_LE_CONN_TIMEOUT msecs_to_jiffies(20000) /* 20 seconds */
-#define HCI_LE_AUTOCONN_TIMEOUT msecs_to_jiffies(4000) /* 4 seconds */
/* HCI data types */
#define HCI_COMMAND_PKT 0x01
@@ -519,7 +557,6 @@ enum {
#define ESCO_LINK 0x02
/* Low Energy links do not have defined link type. Use invented one */
#define LE_LINK 0x80
-#define AMP_LINK 0x81
#define ISO_LINK 0x82
#define INVALID_LINK 0xff
@@ -670,7 +707,7 @@ enum {
#define HCI_ERROR_REMOTE_POWER_OFF 0x15
#define HCI_ERROR_LOCAL_HOST_TERM 0x16
#define HCI_ERROR_PAIRING_NOT_ALLOWED 0x18
-#define HCI_ERROR_UNSUPPORTED_REMOTE_FEATURE 0x1e
+#define HCI_ERROR_UNSUPPORTED_REMOTE_FEATURE 0x1a
#define HCI_ERROR_INVALID_LL_PARAMS 0x1e
#define HCI_ERROR_UNSPECIFIED 0x1f
#define HCI_ERROR_ADVERTISING_TIMEOUT 0x3c
@@ -685,6 +722,7 @@ enum {
#define HCI_RSSI_INVALID 127
#define HCI_SYNC_HANDLE_INVALID 0xffff
+#define HCI_SID_INVALID 0xff
#define HCI_ROLE_MASTER 0x00
#define HCI_ROLE_SLAVE 0x01
@@ -841,6 +879,11 @@ struct hci_cp_remote_name_req_cancel {
bdaddr_t bdaddr;
} __packed;
+struct hci_rp_remote_name_req_cancel {
+ __u8 status;
+ bdaddr_t bdaddr;
+} __packed;
+
#define HCI_OP_READ_REMOTE_FEATURES 0x041b
struct hci_cp_read_remote_features {
__le16 handle;
@@ -935,56 +978,6 @@ struct hci_cp_io_capability_neg_reply {
__u8 reason;
} __packed;
-#define HCI_OP_CREATE_PHY_LINK 0x0435
-struct hci_cp_create_phy_link {
- __u8 phy_handle;
- __u8 key_len;
- __u8 key_type;
- __u8 key[HCI_AMP_LINK_KEY_SIZE];
-} __packed;
-
-#define HCI_OP_ACCEPT_PHY_LINK 0x0436
-struct hci_cp_accept_phy_link {
- __u8 phy_handle;
- __u8 key_len;
- __u8 key_type;
- __u8 key[HCI_AMP_LINK_KEY_SIZE];
-} __packed;
-
-#define HCI_OP_DISCONN_PHY_LINK 0x0437
-struct hci_cp_disconn_phy_link {
- __u8 phy_handle;
- __u8 reason;
-} __packed;
-
-struct ext_flow_spec {
- __u8 id;
- __u8 stype;
- __le16 msdu;
- __le32 sdu_itime;
- __le32 acc_lat;
- __le32 flush_to;
-} __packed;
-
-#define HCI_OP_CREATE_LOGICAL_LINK 0x0438
-#define HCI_OP_ACCEPT_LOGICAL_LINK 0x0439
-struct hci_cp_create_accept_logical_link {
- __u8 phy_handle;
- struct ext_flow_spec tx_flow_spec;
- struct ext_flow_spec rx_flow_spec;
-} __packed;
-
-#define HCI_OP_DISCONN_LOGICAL_LINK 0x043a
-struct hci_cp_disconn_logical_link {
- __le16 log_handle;
-} __packed;
-
-#define HCI_OP_LOGICAL_LINK_CANCEL 0x043b
-struct hci_cp_logical_link_cancel {
- __u8 phy_handle;
- __u8 flow_spec_id;
-} __packed;
-
#define HCI_OP_ENHANCED_SETUP_SYNC_CONN 0x043d
struct hci_coding_format {
__u8 id;
@@ -1564,6 +1557,11 @@ struct hci_rp_read_tx_power {
__s8 tx_power;
} __packed;
+#define HCI_OP_WRITE_SYNC_FLOWCTL 0x0c2f
+struct hci_cp_write_sync_flowctl {
+ __u8 enable;
+} __packed;
+
#define HCI_OP_READ_PAGE_SCAN_TYPE 0x0c46
struct hci_rp_read_page_scan_type {
__u8 status;
@@ -1606,46 +1604,6 @@ struct hci_rp_read_enc_key_size {
__u8 key_size;
} __packed;
-#define HCI_OP_READ_LOCAL_AMP_INFO 0x1409
-struct hci_rp_read_local_amp_info {
- __u8 status;
- __u8 amp_status;
- __le32 total_bw;
- __le32 max_bw;
- __le32 min_latency;
- __le32 max_pdu;
- __u8 amp_type;
- __le16 pal_cap;
- __le16 max_assoc_size;
- __le32 max_flush_to;
- __le32 be_flush_to;
-} __packed;
-
-#define HCI_OP_READ_LOCAL_AMP_ASSOC 0x140a
-struct hci_cp_read_local_amp_assoc {
- __u8 phy_handle;
- __le16 len_so_far;
- __le16 max_len;
-} __packed;
-struct hci_rp_read_local_amp_assoc {
- __u8 status;
- __u8 phy_handle;
- __le16 rem_len;
- __u8 frag[];
-} __packed;
-
-#define HCI_OP_WRITE_REMOTE_AMP_ASSOC 0x140b
-struct hci_cp_write_remote_amp_assoc {
- __u8 phy_handle;
- __le16 len_so_far;
- __le16 rem_len;
- __u8 frag[];
-} __packed;
-struct hci_rp_write_remote_amp_assoc {
- __u8 status;
- __u8 phy_handle;
-} __packed;
-
#define HCI_OP_GET_MWS_TRANSPORT_CONFIG 0x140c
#define HCI_OP_ENABLE_DUT_MODE 0x1803
@@ -1657,6 +1615,15 @@ struct hci_cp_le_set_event_mask {
__u8 mask[8];
} __packed;
+/* BLUETOOTH CORE SPECIFICATION Version 5.4 | Vol 4, Part E
+ * 7.8.2 LE Read Buffer Size command
+ * MAX_LE_MTU is 0xffff.
+ * 0 is also valid. It means that no dedicated LE Buffer exists.
+ * It should use the HCI_Read_Buffer_Size command and mtu is shared
+ * between BR/EDR and LE.
+ */
+#define HCI_MIN_LE_MTU 0x001b
+
#define HCI_OP_LE_READ_BUFFER_SIZE 0x2002
struct hci_rp_le_read_buffer_size {
__u8 status;
@@ -2017,7 +1984,7 @@ struct hci_cp_le_set_ext_adv_data {
__u8 operation;
__u8 frag_pref;
__u8 length;
- __u8 data[];
+ __u8 data[] __counted_by(length);
} __packed;
#define HCI_OP_LE_SET_EXT_SCAN_RSP_DATA 0x2038
@@ -2026,7 +1993,7 @@ struct hci_cp_le_set_ext_scan_rsp_data {
__u8 operation;
__u8 frag_pref;
__u8 length;
- __u8 data[];
+ __u8 data[] __counted_by(length);
} __packed;
#define HCI_OP_LE_SET_EXT_ADV_ENABLE 0x2039
@@ -2052,7 +2019,7 @@ struct hci_cp_le_set_per_adv_data {
__u8 handle;
__u8 operation;
__u8 length;
- __u8 data[];
+ __u8 data[] __counted_by(length);
} __packed;
#define HCI_OP_LE_SET_PER_ADV_ENABLE 0x2040
@@ -2135,7 +2102,7 @@ struct hci_cp_le_set_cig_params {
__le16 c_latency;
__le16 p_latency;
__u8 num_cis;
- struct hci_cis_params cis[];
+ struct hci_cis_params cis[] __counted_by(num_cis);
} __packed;
struct hci_rp_le_set_cig_params {
@@ -2153,7 +2120,7 @@ struct hci_cis {
struct hci_cp_le_create_cis {
__u8 num_cis;
- struct hci_cis cis[];
+ struct hci_cis cis[] __counted_by(num_cis);
} __packed;
#define HCI_OP_LE_REMOVE_CIG 0x2065
@@ -2207,7 +2174,7 @@ struct hci_cp_le_big_create_sync {
__u8 mse;
__le16 timeout;
__u8 num_bis;
- __u8 bis[];
+ __u8 bis[] __counted_by(num_bis);
} __packed;
#define HCI_OP_LE_BIG_TERM_SYNC 0x206c
@@ -2984,6 +2951,11 @@ static inline struct hci_sco_hdr *hci_sco_hdr(const struct sk_buff *skb)
return (struct hci_sco_hdr *) skb->data;
}
+static inline struct hci_iso_hdr *hci_iso_hdr(const struct sk_buff *skb)
+{
+ return (struct hci_iso_hdr *)skb->data;
+}
+
/* Command opcode pack/unpack */
#define hci_opcode_pack(ogf, ocf) ((__u16) ((ocf & 0x03ff)|(ogf << 10)))
#define hci_opcode_ogf(op) (op >> 10)