summaryrefslogtreecommitdiff
path: root/include/net/mac80211.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/net/mac80211.h')
-rw-r--r--include/net/mac80211.h82
1 files changed, 51 insertions, 31 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 5345d358a510..b9a08cd1d97d 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -147,7 +147,6 @@ enum ieee80211_ac_numbers {
IEEE80211_AC_BE = 2,
IEEE80211_AC_BK = 3,
};
-#define IEEE80211_NUM_ACS 4
/**
* struct ieee80211_tx_queue_params - transmit queue configuration
@@ -1018,7 +1017,7 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
* @RX_FLAG_DECRYPTED: This frame was decrypted in hardware.
* @RX_FLAG_MMIC_STRIPPED: the Michael MIC is stripped off this frame,
* verification has been done by the hardware.
- * @RX_FLAG_IV_STRIPPED: The IV/ICV are stripped from this frame.
+ * @RX_FLAG_IV_STRIPPED: The IV and ICV are stripped from this frame.
* If this flag is set, the stack cannot do any replay detection
* hence the driver or hardware will have to do that.
* @RX_FLAG_PN_VALIDATED: Currently only valid for CCMP/GCMP frames, this
@@ -1089,6 +1088,8 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
* @RX_FLAG_ALLOW_SAME_PN: Allow the same PN as same packet before.
* This is used for AMSDU subframes which can have the same PN as
* the first subframe.
+ * @RX_FLAG_ICV_STRIPPED: The ICV is stripped from this frame. CRC checking must
+ * be done in the hardware.
*/
enum mac80211_rx_flags {
RX_FLAG_MMIC_ERROR = BIT(0),
@@ -1124,6 +1125,7 @@ enum mac80211_rx_flags {
RX_FLAG_RADIOTAP_VENDOR_DATA = BIT(31),
RX_FLAG_MIC_STRIPPED = BIT_ULL(32),
RX_FLAG_ALLOW_SAME_PN = BIT_ULL(33),
+ RX_FLAG_ICV_STRIPPED = BIT_ULL(34),
};
#define RX_FLAG_STBC_SHIFT 26
@@ -1766,15 +1768,6 @@ struct ieee80211_sta_rates {
* @max_amsdu_subframes: indicates the maximal number of MSDUs in a single
* A-MSDU. Taken from the Extended Capabilities element. 0 means
* unlimited.
- * @max_amsdu_len: indicates the maximal length of an A-MSDU in bytes. This
- * field is always valid for packets with a VHT preamble. For packets
- * with a HT preamble, additional limits apply:
- * + If the skb is transmitted as part of a BA agreement, the
- * A-MSDU maximal size is min(max_amsdu_len, 4065) bytes.
- * + If the skb is not part of a BA aggreement, the A-MSDU maximal
- * size is min(max_amsdu_len, 7935) bytes.
- * Both additional HT limits must be enforced by the low level driver.
- * This is defined by the spec (IEEE 802.11-2012 section 8.3.2.2 NOTE 2).
* @support_p2p_ps: indicates whether the STA supports P2P PS mechanism or not.
* @max_rc_amsdu_len: Maximum A-MSDU size in bytes recommended by rate control.
* @txq: per-TID data TX queues (if driver uses the TXQ abstraction)
@@ -1797,6 +1790,22 @@ struct ieee80211_sta {
bool tdls_initiator;
bool mfp;
u8 max_amsdu_subframes;
+
+ /**
+ * @max_amsdu_len:
+ * indicates the maximal length of an A-MSDU in bytes.
+ * This field is always valid for packets with a VHT preamble.
+ * For packets with a HT preamble, additional limits apply:
+ *
+ * * If the skb is transmitted as part of a BA agreement, the
+ * A-MSDU maximal size is min(max_amsdu_len, 4065) bytes.
+ * * If the skb is not part of a BA aggreement, the A-MSDU maximal
+ * size is min(max_amsdu_len, 7935) bytes.
+ *
+ * Both additional HT limits must be enforced by the low level
+ * driver. This is defined by the spec (IEEE 802.11-2012 section
+ * 8.3.2.2 NOTE 2).
+ */
u16 max_amsdu_len;
bool support_p2p_ps;
u16 max_rc_amsdu_len;
@@ -3201,26 +3210,6 @@ enum ieee80211_reconfig_type {
* Returns non-zero if this device sent the last beacon.
* The callback can sleep.
*
- * @ampdu_action: Perform a certain A-MPDU action
- * The RA/TID combination determines the destination and TID we want
- * the ampdu action to be performed for. The action is defined through
- * ieee80211_ampdu_mlme_action.
- * When the action is set to %IEEE80211_AMPDU_TX_OPERATIONAL the driver
- * may neither send aggregates containing more subframes than @buf_size
- * nor send aggregates in a way that lost frames would exceed the
- * buffer size. If just limiting the aggregate size, this would be
- * possible with a buf_size of 8:
- * - TX: 1.....7
- * - RX: 2....7 (lost frame #1)
- * - TX: 8..1...
- * which is invalid since #1 was now re-transmitted well past the
- * buffer size of 8. Correct ways to retransmit #1 would be:
- * - TX: 1 or 18 or 81
- * Even "189" would be wrong since 1 could be lost again.
- *
- * Returns a negative error code on failure.
- * The callback can sleep.
- *
* @get_survey: Return per-channel survey information
*
* @rfkill_poll: Poll rfkill hardware state. If you need this, you also
@@ -3573,6 +3562,35 @@ struct ieee80211_ops {
s64 offset);
void (*reset_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
int (*tx_last_beacon)(struct ieee80211_hw *hw);
+
+ /**
+ * @ampdu_action:
+ * Perform a certain A-MPDU action.
+ * The RA/TID combination determines the destination and TID we want
+ * the ampdu action to be performed for. The action is defined through
+ * ieee80211_ampdu_mlme_action.
+ * When the action is set to %IEEE80211_AMPDU_TX_OPERATIONAL the driver
+ * may neither send aggregates containing more subframes than @buf_size
+ * nor send aggregates in a way that lost frames would exceed the
+ * buffer size. If just limiting the aggregate size, this would be
+ * possible with a buf_size of 8:
+ *
+ * - ``TX: 1.....7``
+ * - ``RX: 2....7`` (lost frame #1)
+ * - ``TX: 8..1...``
+ *
+ * which is invalid since #1 was now re-transmitted well past the
+ * buffer size of 8. Correct ways to retransmit #1 would be:
+ *
+ * - ``TX: 1 or``
+ * - ``TX: 18 or``
+ * - ``TX: 81``
+ *
+ * Even ``189`` would be wrong since 1 could be lost again.
+ *
+ * Returns a negative error code on failure.
+ * The callback can sleep.
+ */
int (*ampdu_action)(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_ampdu_params *params);
@@ -5260,6 +5278,7 @@ void ieee80211_resume_disconnect(struct ieee80211_vif *vif);
*
* @vif: &struct ieee80211_vif pointer from the add_interface callback.
* @rssi_event: the RSSI trigger event type
+ * @rssi_level: new RSSI level value or 0 if not available
* @gfp: context flags
*
* When the %IEEE80211_VIF_SUPPORTS_CQM_RSSI is set, and a connection quality
@@ -5268,6 +5287,7 @@ void ieee80211_resume_disconnect(struct ieee80211_vif *vif);
*/
void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif,
enum nl80211_cqm_rssi_threshold_event rssi_event,
+ s32 rssi_level,
gfp_t gfp);
/**