diff options
Diffstat (limited to 'include/net/mac80211.h')
| -rw-r--r-- | include/net/mac80211.h | 163 |
1 files changed, 141 insertions, 22 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index d400fe2e8668..353488ab94a2 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -7,7 +7,7 @@ * Copyright 2007-2010 Johannes Berg <johannes@sipsolutions.net> * Copyright 2013-2014 Intel Mobile Communications GmbH * Copyright (C) 2015 - 2017 Intel Deutschland GmbH - * Copyright (C) 2018 - 2023 Intel Corporation + * Copyright (C) 2018 - 2024 Intel Corporation */ #ifndef MAC80211_H @@ -214,6 +214,10 @@ struct ieee80211_low_level_stats { * @IEEE80211_CHANCTX_CHANGE_CHANNEL: switched to another operating channel, * this is used only with channel switching with CSA * @IEEE80211_CHANCTX_CHANGE_MIN_WIDTH: The min required channel width changed + * @IEEE80211_CHANCTX_CHANGE_AP: The AP channel definition changed, so (wider + * bandwidth) OFDMA settings need to be changed + * @IEEE80211_CHANCTX_CHANGE_PUNCTURING: The punctured channel(s) bitmap + * was changed. */ enum ieee80211_chanctx_change { IEEE80211_CHANCTX_CHANGE_WIDTH = BIT(0), @@ -221,6 +225,19 @@ enum ieee80211_chanctx_change { IEEE80211_CHANCTX_CHANGE_RADAR = BIT(2), IEEE80211_CHANCTX_CHANGE_CHANNEL = BIT(3), IEEE80211_CHANCTX_CHANGE_MIN_WIDTH = BIT(4), + IEEE80211_CHANCTX_CHANGE_AP = BIT(5), + IEEE80211_CHANCTX_CHANGE_PUNCTURING = BIT(6), +}; + +/** + * struct ieee80211_chan_req - A channel "request" + * @oper: channel definition to use for operation + * @ap: the channel definition of the AP, if any + * (otherwise the chan member is %NULL) + */ +struct ieee80211_chan_req { + struct cfg80211_chan_def oper; + struct cfg80211_chan_def ap; }; /** @@ -231,6 +248,8 @@ enum ieee80211_chanctx_change { * * @def: the channel definition * @min_def: the minimum channel definition currently required. + * @ap: the channel definition the AP actually is operating as, + * for use with (wider bandwidth) OFDMA * @rx_chains_static: The number of RX chains that must always be * active on the channel to receive MIMO transmissions * @rx_chains_dynamic: The number of RX chains that must be enabled @@ -243,6 +262,7 @@ enum ieee80211_chanctx_change { struct ieee80211_chanctx_conf { struct cfg80211_chan_def def; struct cfg80211_chan_def min_def; + struct cfg80211_chan_def ap; u8 rx_chains_static, rx_chains_dynamic; @@ -340,8 +360,8 @@ struct ieee80211_vif_chanctx_switch { * @BSS_CHANGED_FILS_DISCOVERY: FILS discovery status changed. * @BSS_CHANGED_UNSOL_BCAST_PROBE_RESP: Unsolicited broadcast probe response * status changed. - * @BSS_CHANGED_EHT_PUNCTURING: The channel puncturing bitmap changed. * @BSS_CHANGED_MLD_VALID_LINKS: MLD valid links status changed. + * @BSS_CHANGED_MLD_TTLM: TID to link mapping was changed */ enum ieee80211_bss_change { BSS_CHANGED_ASSOC = 1<<0, @@ -376,8 +396,8 @@ enum ieee80211_bss_change { BSS_CHANGED_HE_BSS_COLOR = 1<<29, BSS_CHANGED_FILS_DISCOVERY = 1<<30, BSS_CHANGED_UNSOL_BCAST_PROBE_RESP = 1<<31, - BSS_CHANGED_EHT_PUNCTURING = BIT_ULL(32), BSS_CHANGED_MLD_VALID_LINKS = BIT_ULL(33), + BSS_CHANGED_MLD_TTLM = BIT_ULL(34), /* when adding here, make sure to change ieee80211_reconfig */ }; @@ -537,6 +557,10 @@ struct ieee80211_fils_discovery { * to that BSS) that can change during the lifetime of the BSS. * * @vif: reference to owning VIF + * @bss: the cfg80211 bss descriptor. Valid only for a station, and only + * when associated. Note: This contains information which is not + * necessarily authenticated. For example, information coming from probe + * responses. * @addr: (link) address used locally * @link_id: link ID, or 0 for non-MLO * @htc_trig_based_pkt_ext: default PE in 4us units, if BSS supports HE @@ -581,7 +605,7 @@ struct ieee80211_fils_discovery { * @mcast_rate: per-band multicast rate index + 1 (0: disabled) * @bssid: The BSSID for this BSS * @enable_beacon: whether beaconing should be enabled or not - * @chandef: Channel definition for this BSS -- the hardware might be + * @chanreq: Channel request for this BSS -- the hardware might be * configured a higher bandwidth than this BSS uses, for example. * @mu_group: VHT MU-MIMO group membership data * @ht_operation_mode: HT operation mode like in &struct ieee80211_ht_operation. @@ -642,9 +666,7 @@ struct ieee80211_fils_discovery { * @tx_pwr_env_num: number of @tx_pwr_env. * @pwr_reduction: power constraint of BSS. * @eht_support: does this BSS support EHT - * @eht_puncturing: bitmap to indicate which channels are punctured in this BSS * @csa_active: marks whether a channel switch is going on. - * @csa_punct_bitmap: new puncturing bitmap for channel switch * @mu_mimo_owner: indicates interface owns MU-MIMO capability * @chanctx_conf: The channel context this interface is assigned to, or %NULL * when it is not assigned. This pointer is RCU-protected due to the TX @@ -682,6 +704,7 @@ struct ieee80211_fils_discovery { */ struct ieee80211_bss_conf { struct ieee80211_vif *vif; + struct cfg80211_bss *bss; const u8 *bssid; unsigned int link_id; @@ -714,7 +737,7 @@ struct ieee80211_bss_conf { u32 cqm_rssi_hyst; s32 cqm_rssi_low; s32 cqm_rssi_high; - struct cfg80211_chan_def chandef; + struct ieee80211_chan_req chanreq; struct ieee80211_mu_group_data mu_group; bool qos; bool hidden_ssid; @@ -747,10 +770,8 @@ struct ieee80211_bss_conf { u8 tx_pwr_env_num; u8 pwr_reduction; bool eht_support; - u16 eht_puncturing; bool csa_active; - u16 csa_punct_bitmap; bool mu_mimo_owner; struct ieee80211_chanctx_conf __rcu *chanctx_conf; @@ -1742,8 +1763,9 @@ struct ieee80211_conf { * @chandef: the new channel to switch to * @count: the number of TBTT's until the channel switch event * @delay: maximum delay between the time the AP transmitted the last beacon in - * current channel and the expected time of the first beacon in the new - * channel, expressed in TU. + * current channel and the expected time of the first beacon in the new + * channel, expressed in TU. + * @link_id: the link ID of the link doing the channel switch, 0 for non-MLO */ struct ieee80211_channel_switch { u64 timestamp; @@ -1751,6 +1773,7 @@ struct ieee80211_channel_switch { bool block_tx; struct cfg80211_chan_def chandef; u8 count; + u8 link_id; u32 delay; }; @@ -1772,6 +1795,10 @@ struct ieee80211_channel_switch { * this is not pure P2P vif. * @IEEE80211_VIF_EML_ACTIVE: The driver indicates that EML operation is * enabled for the interface. + * @IEEE80211_VIF_IGNORE_OFDMA_WIDER_BW: Ignore wider bandwidth OFDMA + * operation on this interface and request a channel context without + * the AP definition. Use this e.g. because the device is able to + * handle OFDMA (downlink and trigger for uplink) on a per-AP basis. */ enum ieee80211_vif_flags { IEEE80211_VIF_BEACON_FILTER = BIT(0), @@ -1779,6 +1806,7 @@ enum ieee80211_vif_flags { IEEE80211_VIF_SUPPORTS_UAPSD = BIT(2), IEEE80211_VIF_GET_NOA_UPDATE = BIT(3), IEEE80211_VIF_EML_ACTIVE = BIT(4), + IEEE80211_VIF_IGNORE_OFDMA_WIDER_BW = BIT(5), }; @@ -1808,9 +1836,11 @@ enum ieee80211_offload_flags { * @ps: power-save mode (STA only). This flag is NOT affected by * offchannel/dynamic_ps operations. * @aid: association ID number, valid only when @assoc is true - * @eml_cap: EML capabilities as described in P802.11be_D2.2 Figure 9-1002k. + * @eml_cap: EML capabilities as described in P802.11be_D4.1 Figure 9-1001j. * @eml_med_sync_delay: Medium Synchronization delay as described in - * P802.11be_D2.2 Figure 9-1002j. + * P802.11be_D4.1 Figure 9-1001i. + * @mld_capa_op: MLD Capabilities and Operations per P802.11be_D4.1 + * Figure 9-1001k * @arp_addr_list: List of IPv4 addresses for hardware ARP filtering. The * may filter ARP queries targeted for other addresses than listed here. * The driver must allow ARP queries targeted for all address listed here @@ -1835,6 +1865,7 @@ struct ieee80211_vif_cfg { u16 aid; u16 eml_cap; u16 eml_med_sync_delay; + u16 mld_capa_op; __be32 arp_addr_list[IEEE80211_BSS_ARP_ADDR_LIST_LEN]; int arp_addr_cnt; @@ -1845,6 +1876,35 @@ struct ieee80211_vif_cfg { u8 ap_addr[ETH_ALEN] __aligned(2); }; +#define IEEE80211_TTLM_NUM_TIDS 8 + +/** + * struct ieee80211_neg_ttlm - negotiated TID to link map info + * + * @downlink: bitmap of active links per TID for downlink, or 0 if mapping for + * this TID is not included. + * @uplink: bitmap of active links per TID for uplink, or 0 if mapping for this + * TID is not included. + * @valid: info is valid or not. + */ +struct ieee80211_neg_ttlm { + u16 downlink[IEEE80211_TTLM_NUM_TIDS]; + u16 uplink[IEEE80211_TTLM_NUM_TIDS]; + bool valid; +}; + +/** + * enum ieee80211_neg_ttlm_res - return value for negotiated TTLM handling + * @NEG_TTLM_RES_ACCEPT: accept the request + * @NEG_TTLM_RES_REJECT: reject the request + * @NEG_TTLM_RES_SUGGEST_PREFERRED: reject and suggest a new mapping + */ +enum ieee80211_neg_ttlm_res { + NEG_TTLM_RES_ACCEPT, + NEG_TTLM_RES_REJECT, + NEG_TTLM_RES_SUGGEST_PREFERRED +}; + /** * struct ieee80211_vif - per-interface data * @@ -1863,6 +1923,11 @@ struct ieee80211_vif_cfg { * API calls meant for that purpose. * @dormant_links: bitmap of valid but disabled links, or 0 for non-MLO. * Must be a subset of valid_links. + * @suspended_links: subset of dormant_links representing links that are + * suspended. + * 0 for non-MLO. + * @neg_ttlm: negotiated TID to link mapping info. + * see &struct ieee80211_neg_ttlm. * @addr: address of this interface * @p2p: indicates whether this AP or STA interface is a p2p * interface, i.e. a GO or p2p-sta respectively @@ -1900,7 +1965,8 @@ struct ieee80211_vif { struct ieee80211_vif_cfg cfg; struct ieee80211_bss_conf bss_conf; struct ieee80211_bss_conf __rcu *link_conf[IEEE80211_MLD_MAX_NUM_LINKS]; - u16 valid_links, active_links, dormant_links; + u16 valid_links, active_links, dormant_links, suspended_links; + struct ieee80211_neg_ttlm neg_ttlm; u8 addr[ETH_ALEN] __aligned(2); bool p2p; @@ -1947,6 +2013,21 @@ static inline bool ieee80211_vif_is_mld(const struct ieee80211_vif *vif) return vif->valid_links != 0; } +/** + * ieee80211_vif_link_active - check if a given link is active + * @vif: the vif + * @link_id: the link ID to check + * Return: %true if the vif is an MLD and the link is active, or if + * the vif is not an MLD and the link ID is 0; %false otherwise. + */ +static inline bool ieee80211_vif_link_active(const struct ieee80211_vif *vif, + unsigned int link_id) +{ + if (!ieee80211_vif_is_mld(vif)) + return link_id == 0; + return vif->active_links & BIT(link_id); +} + #define for_each_vif_active_link(vif, link, link_id) \ for (link_id = 0; link_id < ARRAY_SIZE((vif)->link_conf); link_id++) \ if ((!(vif)->active_links || \ @@ -2041,6 +2122,8 @@ static inline bool lockdep_vif_wiphy_mutex_held(struct ieee80211_vif *vif) * @IEEE80211_KEY_FLAG_GENERATE_MMIE: This flag should be set by the driver * for a AES_CMAC key to indicate that it requires sequence number * generation only + * @IEEE80211_KEY_FLAG_SPP_AMSDU: SPP A-MSDUs can be used with this key + * (set by mac80211 from the sta->spp_amsdu flag) */ enum ieee80211_key_flags { IEEE80211_KEY_FLAG_GENERATE_IV_MGMT = BIT(0), @@ -2054,6 +2137,7 @@ enum ieee80211_key_flags { IEEE80211_KEY_FLAG_PUT_MIC_SPACE = BIT(8), IEEE80211_KEY_FLAG_NO_AUTO_TX = BIT(9), IEEE80211_KEY_FLAG_GENERATE_MMIE = BIT(10), + IEEE80211_KEY_FLAG_SPP_AMSDU = BIT(11), }; /** @@ -2352,6 +2436,7 @@ struct ieee80211_link_sta { * would be assigned to link[link_id] where link_id is the id assigned * by the AP. * @valid_links: bitmap of valid links, or 0 for non-MLO + * @spp_amsdu: indicates whether the STA uses SPP A-MSDU or not. */ struct ieee80211_sta { u8 addr[ETH_ALEN]; @@ -2365,6 +2450,7 @@ struct ieee80211_sta { bool tdls_initiator; bool mfp; bool mlo; + bool spp_amsdu; u8 max_amsdu_subframes; struct ieee80211_sta_aggregates *cur; @@ -2692,6 +2778,11 @@ struct ieee80211_txq { * @IEEE80211_HW_DISALLOW_PUNCTURING: HW requires disabling puncturing in EHT * and connecting with a lower bandwidth instead * + * @IEEE80211_HW_HANDLES_QUIET_CSA: HW/driver handles quieting for CSA, so + * no need to stop queues. This really should be set by a driver that + * implements MLO, so operation can continue on other links when one + * link is switching. + * * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays */ enum ieee80211_hw_flags { @@ -2750,6 +2841,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_DETECTS_COLOR_COLLISION, IEEE80211_HW_MLO_MCAST_MULTI_LINK_TX, IEEE80211_HW_DISALLOW_PUNCTURING, + IEEE80211_HW_HANDLES_QUIET_CSA, /* keep last, obviously */ NUM_IEEE80211_HW_FLAGS @@ -4182,7 +4274,7 @@ struct ieee80211_prep_tx_info { * after a channel switch procedure is completed, allowing the * driver to go back to a normal configuration. * @abort_channel_switch: This is an optional callback that is called - * when channel switch procedure was completed, allowing the + * when channel switch procedure was aborted, allowing the * driver to go back to a normal configuration. * @channel_switch_rx_beacon: This is an optional callback that is called * when channel switch procedure is in progress and additional beacon with @@ -4293,6 +4385,10 @@ struct ieee80211_prep_tx_info { * flow offloading for flows originating from the vif. * Note that the driver must not assume that the vif driver_data is valid * at this point, since the callback can be called during netdev teardown. + * @can_neg_ttlm: for managed interface, requests the driver to determine + * if the requested TID-To-Link mapping can be accepted or not. + * If it's not accepted the driver may suggest a preferred mapping and + * modify @ttlm parameter with the suggested TID-to-Link mapping. */ struct ieee80211_ops { void (*tx)(struct ieee80211_hw *hw, @@ -4574,7 +4670,8 @@ struct ieee80211_ops { struct ieee80211_vif *vif, struct ieee80211_bss_conf *link_conf); void (*abort_channel_switch)(struct ieee80211_hw *hw, - struct ieee80211_vif *vif); + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *link_conf); void (*channel_switch_rx_beacon)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_channel_switch *ch_switch); @@ -4673,6 +4770,9 @@ struct ieee80211_ops { struct net_device *dev, enum tc_setup_type type, void *type_data); + enum ieee80211_neg_ttlm_res + (*can_neg_ttlm)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, + struct ieee80211_neg_ttlm *ttlm); }; /** @@ -5455,6 +5555,7 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, /** * ieee80211_beacon_update_cntdwn - request mac80211 to decrement the beacon countdown * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @link_id: valid link_id during MLO or 0 for non-MLO * * The beacon counter should be updated after each beacon transmission. * This function is called implicitly when @@ -5464,7 +5565,8 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, * * Return: new countdown value */ -u8 ieee80211_beacon_update_cntdwn(struct ieee80211_vif *vif); +u8 ieee80211_beacon_update_cntdwn(struct ieee80211_vif *vif, + unsigned int link_id); /** * ieee80211_beacon_set_cntdwn - request mac80211 to set beacon countdown @@ -5482,20 +5584,23 @@ void ieee80211_beacon_set_cntdwn(struct ieee80211_vif *vif, u8 counter); /** * ieee80211_csa_finish - notify mac80211 about channel switch * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @link_id: valid link_id during MLO or 0 for non-MLO * * After a channel switch announcement was scheduled and the counter in this * announcement hits 1, this function must be called by the driver to * notify mac80211 that the channel can be changed. */ -void ieee80211_csa_finish(struct ieee80211_vif *vif); +void ieee80211_csa_finish(struct ieee80211_vif *vif, unsigned int link_id); /** * ieee80211_beacon_cntdwn_is_complete - find out if countdown reached 1 * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * @link_id: valid link_id during MLO or 0 for non-MLO * * This function returns whether the countdown reached zero. */ -bool ieee80211_beacon_cntdwn_is_complete(struct ieee80211_vif *vif); +bool ieee80211_beacon_cntdwn_is_complete(struct ieee80211_vif *vif, + unsigned int link_id); /** * ieee80211_color_change_finish - notify mac80211 about color change @@ -5831,6 +5936,7 @@ void ieee80211_remove_key(struct ieee80211_key_conf *keyconf); * ieee80211_gtk_rekey_add - add a GTK key from rekeying during WoWLAN * @vif: the virtual interface to add the key on * @keyconf: new key data + * @link_id: the link id of the key or -1 for non-MLO * * When GTK rekeying was done while the system was suspended, (a) new * key(s) will be available. These will be needed by mac80211 for proper @@ -5858,7 +5964,8 @@ void ieee80211_remove_key(struct ieee80211_key_conf *keyconf); */ struct ieee80211_key_conf * ieee80211_gtk_rekey_add(struct ieee80211_vif *vif, - struct ieee80211_key_conf *keyconf); + struct ieee80211_key_conf *keyconf, + int link_id); /** * ieee80211_gtk_rekey_notify - notify userspace supplicant of rekeying @@ -7416,11 +7523,10 @@ ieee80211_get_unsol_bcast_probe_resp_tmpl(struct ieee80211_hw *hw, * @vif: &struct ieee80211_vif pointer from the add_interface callback. * @color_bitmap: a 64 bit bitmap representing the colors that the local BSS is * aware of. - * @gfp: allocation flags */ void ieee80211_obss_color_collision_notify(struct ieee80211_vif *vif, - u64 color_bitmap, gfp_t gfp); + u64 color_bitmap); /** * ieee80211_is_tx_data - check if frame is a data frame @@ -7480,4 +7586,17 @@ int ieee80211_set_active_links(struct ieee80211_vif *vif, u16 active_links); void ieee80211_set_active_links_async(struct ieee80211_vif *vif, u16 active_links); +/* for older drivers - let's not document these ... */ +int ieee80211_emulate_add_chanctx(struct ieee80211_hw *hw, + struct ieee80211_chanctx_conf *ctx); +void ieee80211_emulate_remove_chanctx(struct ieee80211_hw *hw, + struct ieee80211_chanctx_conf *ctx); +void ieee80211_emulate_change_chanctx(struct ieee80211_hw *hw, + struct ieee80211_chanctx_conf *ctx, + u32 changed); +int ieee80211_emulate_switch_vif_chanctx(struct ieee80211_hw *hw, + struct ieee80211_vif_chanctx_switch *vifs, + int n_vifs, + enum ieee80211_chanctx_switch_mode mode); + #endif /* MAC80211_H */ |