diff options
Diffstat (limited to 'include/net/mac80211.h')
| -rw-r--r-- | include/net/mac80211.h | 58 |
1 files changed, 11 insertions, 47 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 7477f020ee7a..9a012be615ff 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -229,7 +229,8 @@ enum ieee80211_rssi_event { * valid in station mode only while @assoc is true and if also * requested by %IEEE80211_HW_NEED_DTIM_PERIOD (cf. also hw conf * @ps_dtim_period) - * @timestamp: beacon timestamp + * @last_tsf: last beacon's/probe response's TSF timestamp (could be old + * as it may have been received during scanning long ago) * @beacon_int: beacon interval * @assoc_capability: capabilities taken from assoc resp * @basic_rates: bitmap of basic rates, each bit stands for an @@ -276,7 +277,7 @@ struct ieee80211_bss_conf { u8 dtim_period; u16 beacon_int; u16 assoc_capability; - u64 timestamp; + u64 last_tsf; u32 basic_rates; int mcast_rate[IEEE80211_NUM_BANDS]; u16 ht_operation_mode; @@ -659,6 +660,8 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) * @RX_FLAG_HT: HT MCS was used and rate_idx is MCS index * @RX_FLAG_40MHZ: HT40 (40 MHz) was used * @RX_FLAG_SHORT_GI: Short guard interval was used + * @RX_FLAG_NO_SIGNAL_VAL: The signal strength value is not present. + * Valid only for data frames (mainly A-MPDU) */ enum mac80211_rx_flags { RX_FLAG_MMIC_ERROR = 1<<0, @@ -672,6 +675,7 @@ enum mac80211_rx_flags { RX_FLAG_HT = 1<<9, RX_FLAG_40MHZ = 1<<10, RX_FLAG_SHORT_GI = 1<<11, + RX_FLAG_NO_SIGNAL_VAL = 1<<12, }; /** @@ -1763,20 +1767,6 @@ enum ieee80211_ampdu_mlme_action { }; /** - * enum ieee80211_tx_sync_type - TX sync type - * @IEEE80211_TX_SYNC_AUTH: sync TX for authentication - * (and possibly also before direct probe) - * @IEEE80211_TX_SYNC_ASSOC: sync TX for association - * @IEEE80211_TX_SYNC_ACTION: sync TX for action frame - * (not implemented yet) - */ -enum ieee80211_tx_sync_type { - IEEE80211_TX_SYNC_AUTH, - IEEE80211_TX_SYNC_ASSOC, - IEEE80211_TX_SYNC_ACTION, -}; - -/** * enum ieee80211_frame_release_type - frame release reason * @IEEE80211_FRAME_RELEASE_PSPOLL: frame released for PS-Poll * @IEEE80211_FRAME_RELEASE_UAPSD: frame(s) released due to @@ -1886,26 +1876,6 @@ enum ieee80211_frame_release_type { * of the bss parameters has changed when a call is made. The callback * can sleep. * - * @tx_sync: Called before a frame is sent to an AP/GO. In the GO case, the - * driver should sync with the GO's powersaving so the device doesn't - * transmit the frame while the GO is asleep. In the regular AP case - * it may be used by drivers for devices implementing other restrictions - * on talking to APs, e.g. due to regulatory enforcement or just HW - * restrictions. - * This function is called for every authentication, association and - * action frame separately since applications might attempt to auth - * with multiple APs before chosing one to associate to. If it returns - * an error, the corresponding authentication, association or frame - * transmission is aborted and reported as having failed. It is always - * called after tuning to the correct channel. - * The callback might be called multiple times before @finish_tx_sync - * (but @finish_tx_sync will be called once for each) but in practice - * this is unlikely to happen. It can also refuse in that case if the - * driver cannot handle that situation. - * This callback can sleep. - * @finish_tx_sync: Called as a counterpart to @tx_sync, unless that returned - * an error. This callback can sleep. - * * @prepare_multicast: Prepare for multicast filter configuration. * This callback is optional, and its return value is passed * to configure_filter(). This callback must be atomic. @@ -2177,13 +2147,6 @@ struct ieee80211_ops { struct ieee80211_bss_conf *info, u32 changed); - int (*tx_sync)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - const u8 *bssid, enum ieee80211_tx_sync_type type); - void (*finish_tx_sync)(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - const u8 *bssid, - enum ieee80211_tx_sync_type type); - u64 (*prepare_multicast)(struct ieee80211_hw *hw, struct netdev_hw_addr_list *mc_list); void (*configure_filter)(struct ieee80211_hw *hw, @@ -3565,6 +3528,8 @@ enum rate_control_changed { * @hw: The hardware the algorithm is invoked for. * @sband: The band this frame is being transmitted on. * @bss_conf: the current BSS configuration + * @skb: the skb that will be transmitted, the control information in it needs + * to be filled in * @reported_rate: The rate control algorithm can fill this in to indicate * which rate should be reported to userspace as the current rate and * used for rate calculations in the mesh network. @@ -3572,12 +3537,11 @@ enum rate_control_changed { * RTS threshold * @short_preamble: whether mac80211 will request short-preamble transmission * if the selected rate supports it - * @max_rate_idx: user-requested maximum rate (not MCS for now) + * @max_rate_idx: user-requested maximum (legacy) rate * (deprecated; this will be removed once drivers get updated to use * rate_idx_mask) - * @rate_idx_mask: user-requested rate mask (not MCS for now) - * @skb: the skb that will be transmitted, the control information in it needs - * to be filled in + * @rate_idx_mask: user-requested (legacy) rate mask + * @rate_idx_mcs_mask: user-requested MCS rate mask * @bss: whether this frame is sent out in AP or IBSS mode */ struct ieee80211_tx_rate_control { |