summaryrefslogtreecommitdiff
path: root/include/soc/tegra/bpmp-abi.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/soc/tegra/bpmp-abi.h')
-rw-r--r--include/soc/tegra/bpmp-abi.h1188
1 files changed, 947 insertions, 241 deletions
diff --git a/include/soc/tegra/bpmp-abi.h b/include/soc/tegra/bpmp-abi.h
index 98d8d38b99a1..ab7f8796a260 100644
--- a/include/soc/tegra/bpmp-abi.h
+++ b/include/soc/tegra/bpmp-abi.h
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2014-2016, NVIDIA CORPORATION. All rights reserved.
+ * Copyright (c) 2014-2018, NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@@ -40,7 +40,6 @@
* @file
*/
-
/**
* @defgroup MRQ MRQ Messages
* @brief Messages sent to/from BPMP via IPC
@@ -53,7 +52,7 @@
*/
/**
- * @addtogroup MRQ_Format Message Format
+ * @addtogroup MRQ_Format
* @{
* The CPU requests the BPMP to perform a particular service by
* sending it an IVC frame containing a single MRQ message. An MRQ
@@ -76,7 +75,7 @@
/**
* @ingroup MRQ_Format
- * @brief header for an MRQ message
+ * @brief Header for an MRQ message
*
* Provides the MRQ number for the MRQ message: #mrq. The remainder of
* the MRQ message is a payload (immediately following the
@@ -86,7 +85,7 @@ struct mrq_request {
/** @brief MRQ number of the request */
uint32_t mrq;
/**
- * @brief flags providing follow up directions to the receiver
+ * @brief Flags providing follow up directions to the receiver
*
* | Bit | Description |
* |-----|--------------------------------------------|
@@ -98,7 +97,7 @@ struct mrq_request {
/**
* @ingroup MRQ_Format
- * @brief header for an MRQ response
+ * @brief Header for an MRQ response
*
* Provides an error code for the associated MRQ message. The
* remainder of the MRQ response is a payload (immediately following
@@ -106,9 +105,9 @@ struct mrq_request {
* mrq_request::mrq
*/
struct mrq_response {
- /** @brief error code for the MRQ request itself */
+ /** @brief Error code for the MRQ request itself */
int32_t err;
- /** @brief reserved for future use */
+ /** @brief Reserved for future use */
uint32_t flags;
} __ABI_PACKED;
@@ -152,6 +151,14 @@ struct mrq_response {
#define MRQ_TRACE_ITER 64
#define MRQ_RINGBUF_CONSOLE 65
#define MRQ_PG 66
+#define MRQ_CPU_NDIV_LIMITS 67
+#define MRQ_STRAP 68
+#define MRQ_UPHY 69
+#define MRQ_CPU_AUTO_CC3 70
+#define MRQ_QUERY_FW_TAG 71
+#define MRQ_FMON 72
+#define MRQ_EC 73
+#define MRQ_FBVOLT_STATUS 74
/** @} */
@@ -160,31 +167,35 @@ struct mrq_response {
* @brief Maximum MRQ code to be sent by CPU software to
* BPMP. Subject to change in future
*/
-#define MAX_CPU_MRQ_ID 66
+#define MAX_CPU_MRQ_ID 74
/**
- * @addtogroup MRQ_Payloads Message Payloads
+ * @addtogroup MRQ_Payloads
* @{
- * @defgroup Ping
+ * @defgroup Ping Ping
* @defgroup Query_Tag Query Tag
* @defgroup Module Loadable Modules
- * @defgroup Trace
- * @defgroup Debugfs
- * @defgroup Reset
- * @defgroup I2C
- * @defgroup Clocks
+ * @defgroup Trace Trace
+ * @defgroup Debugfs Debug File System
+ * @defgroup Reset Reset
+ * @defgroup I2C I2C
+ * @defgroup Clocks Clocks
* @defgroup ABI_info ABI Info
- * @defgroup MC_Flush MC Flush
- * @defgroup Powergating
- * @defgroup Thermal
+ * @defgroup Powergating Power Gating
+ * @defgroup Thermal Thermal
* @defgroup Vhint CPU Voltage hint
- * @defgroup MRQ_Deprecated Deprecated MRQ messages
- * @defgroup EMC
- * @defgroup RingbufConsole
+ * @defgroup EMC EMC
+ * @defgroup CPU NDIV Limits
+ * @defgroup RingbufConsole Ring Buffer Console
+ * @defgroup Strap Straps
+ * @defgroup UPHY UPHY
+ * @defgroup CC3 Auto-CC3
+ * @defgroup FMON FMON
+ * @defgroup EC EC
+ * @defgroup Fbvolt_status Fuse Burn Voltage Status
* @}
*/
-
/**
* @ingroup MRQ_Codes
* @def MRQ_PING
@@ -214,20 +225,20 @@ struct mrq_response {
/**
* @ingroup Ping
- * @brief request with #MRQ_PING
+ * @brief Request with #MRQ_PING
*
* Used by the sender of an #MRQ_PING message to request a pong from
* recipient. The response from the recipient is computed based on
* #challenge.
*/
struct mrq_ping_request {
-/** @brief arbitrarily chosen value */
+/** @brief Arbitrarily chosen value */
uint32_t challenge;
} __ABI_PACKED;
/**
* @ingroup Ping
- * @brief response to #MRQ_PING
+ * @brief Response to #MRQ_PING
*
* Sent in response to an #MRQ_PING message. #reply should be the
* mrq_ping_request challenge left shifted by 1 with the carry-bit
@@ -235,14 +246,16 @@ struct mrq_ping_request {
*
*/
struct mrq_ping_response {
- /** @brief response to the MRQ_PING challege */
+ /** @brief Response to the MRQ_PING challege */
uint32_t reply;
} __ABI_PACKED;
/**
* @ingroup MRQ_Codes
* @def MRQ_QUERY_TAG
- * @brief Query BPMP firmware's tag (i.e. version information)
+ * @brief Query BPMP firmware's tag (i.e. unique identifer)
+ *
+ * @deprecated Use #MRQ_QUERY_FW_TAG instead.
*
* * Platforms: All
* * Initiators: CCPLEX
@@ -254,25 +267,50 @@ struct mrq_ping_response {
/**
* @ingroup Query_Tag
- * @brief request with #MRQ_QUERY_TAG
- *
- * Used by #MRQ_QUERY_TAG call to ask BPMP to fill in the memory
- * pointed by #addr with BPMP firmware header.
+ * @brief Request with #MRQ_QUERY_TAG
*
- * The sender is reponsible for ensuring that #addr is mapped in to
- * the recipient's address map.
+ * @deprecated This structure will be removed in future version.
+ * Use MRQ_QUERY_FW_TAG instead.
*/
struct mrq_query_tag_request {
- /** @brief base address to store the firmware header */
+ /** @brief Base address to store the firmware tag */
uint32_t addr;
} __ABI_PACKED;
+
/**
* @ingroup MRQ_Codes
- * @def MRQ_MODULE_LOAD
- * @brief dynamically load a BPMP code module
+ * @def MRQ_QUERY_FW_TAG
+ * @brief Query BPMP firmware's tag (i.e. unique identifier)
*
* * Platforms: All
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: N/A
+ * * Response Payload: @ref mrq_query_fw_tag_response
+ *
+ */
+
+/**
+ * @ingroup Query_Tag
+ * @brief Response to #MRQ_QUERY_FW_TAG
+ *
+ * Sent in response to #MRQ_QUERY_FW_TAG message. #tag contains the unique
+ * identifier for the version of firmware issuing the reply.
+ *
+ */
+struct mrq_query_fw_tag_response {
+ /** @brief Array to store tag information */
+ uint8_t tag[32];
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_MODULE_LOAD
+ * @brief Dynamically load a BPMP code module
+ *
+ * * Platforms: T210, T214, T186
+ * @cond (bpmp_t210 || bpmp_t214 || bpmp_t186)
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_module_load_request
@@ -284,7 +322,7 @@ struct mrq_query_tag_request {
/**
* @ingroup Module
- * @brief request with #MRQ_MODULE_LOAD
+ * @brief Request with #MRQ_MODULE_LOAD
*
* Used by #MRQ_MODULE_LOAD calls to ask the recipient to dynamically
* load the code located at #phys_addr and having size #size
@@ -300,29 +338,31 @@ struct mrq_query_tag_request {
*
*/
struct mrq_module_load_request {
- /** @brief base address of the code to load. Treated as (void *) */
+ /** @brief Base address of the code to load. Treated as (void *) */
uint32_t phys_addr; /* (void *) */
- /** @brief size in bytes of code to load */
+ /** @brief Size in bytes of code to load */
uint32_t size;
} __ABI_PACKED;
/**
* @ingroup Module
- * @brief response to #MRQ_MODULE_LOAD
+ * @brief Response to #MRQ_MODULE_LOAD
*
* @todo document mrq_response::err
*/
struct mrq_module_load_response {
- /** @brief handle to the loaded module */
+ /** @brief Handle to the loaded module */
uint32_t base;
} __ABI_PACKED;
+/** @endcond*/
/**
* @ingroup MRQ_Codes
* @def MRQ_MODULE_UNLOAD
- * @brief unload a previously loaded code module
+ * @brief Unload a previously loaded code module
*
- * * Platforms: All
+ * * Platforms: T210, T214, T186
+ * @cond (bpmp_t210 || bpmp_t214 || bpmp_t186)
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_module_unload_request
@@ -333,20 +373,21 @@ struct mrq_module_load_response {
/**
* @ingroup Module
- * @brief request with #MRQ_MODULE_UNLOAD
+ * @brief Request with #MRQ_MODULE_UNLOAD
*
* Used by #MRQ_MODULE_UNLOAD calls to request that a previously loaded
* module be unloaded.
*/
struct mrq_module_unload_request {
- /** @brief handle of the module to unload */
+ /** @brief Handle of the module to unload */
uint32_t base;
} __ABI_PACKED;
+/** @endcond*/
/**
* @ingroup MRQ_Codes
* @def MRQ_TRACE_MODIFY
- * @brief modify the set of enabled trace events
+ * @brief Modify the set of enabled trace events
*
* * Platforms: All
* * Initiators: CCPLEX
@@ -359,22 +400,22 @@ struct mrq_module_unload_request {
/**
* @ingroup Trace
- * @brief request with #MRQ_TRACE_MODIFY
+ * @brief Request with #MRQ_TRACE_MODIFY
*
* Used by %MRQ_TRACE_MODIFY calls to enable or disable specify trace
* events. #set takes precedence for any bit set in both #set and
* #clr.
*/
struct mrq_trace_modify_request {
- /** @brief bit mask of trace events to disable */
+ /** @brief Bit mask of trace events to disable */
uint32_t clr;
- /** @brief bit mask of trace events to enable */
+ /** @brief Bit mask of trace events to enable */
uint32_t set;
} __ABI_PACKED;
/**
* @ingroup Trace
- * @brief response to #MRQ_TRACE_MODIFY
+ * @brief Response to #MRQ_TRACE_MODIFY
*
* Sent in repsonse to an #MRQ_TRACE_MODIFY message. #mask reflects the
* state of which events are enabled after the recipient acted on the
@@ -382,7 +423,7 @@ struct mrq_trace_modify_request {
*
*/
struct mrq_trace_modify_response {
- /** @brief bit mask of trace event enable states */
+ /** @brief Bit mask of trace event enable states */
uint32_t mask;
} __ABI_PACKED;
@@ -407,7 +448,7 @@ struct mrq_trace_modify_response {
/**
* @ingroup Trace
- * @brief request with #MRQ_WRITE_TRACE
+ * @brief Request with #MRQ_WRITE_TRACE
*
* Used by MRQ_WRITE_TRACE calls to ask the recipient to copy trace
* data from the recipient's local buffer to the output buffer. #area
@@ -420,22 +461,22 @@ struct mrq_trace_modify_response {
* overwrites.
*/
struct mrq_write_trace_request {
- /** @brief base address of output buffer */
+ /** @brief Base address of output buffer */
uint32_t area;
- /** @brief size in bytes of the output buffer */
+ /** @brief Size in bytes of the output buffer */
uint32_t size;
} __ABI_PACKED;
/**
* @ingroup Trace
- * @brief response to #MRQ_WRITE_TRACE
+ * @brief Response to #MRQ_WRITE_TRACE
*
* Once this response is sent, the respondent will not access the
* output buffer further.
*/
struct mrq_write_trace_response {
/**
- * @brief flag whether more data remains in local buffer
+ * @brief Flag whether more data remains in local buffer
*
* Value is 1 if the entire local trace buffer has been
* drained to the outputbuffer. Value is 0 otherwise.
@@ -456,9 +497,10 @@ struct mrq_threaded_ping_response {
/**
* @ingroup MRQ_Codes
* @def MRQ_MODULE_MAIL
- * @brief send a message to a loadable module
+ * @brief Send a message to a loadable module
*
- * * Platforms: All
+ * * Platforms: T210, T214, T186
+ * @cond (bpmp_t210 || bpmp_t214 || bpmp_t186)
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_module_mail_request
@@ -469,12 +511,12 @@ struct mrq_threaded_ping_response {
/**
* @ingroup Module
- * @brief request with #MRQ_MODULE_MAIL
+ * @brief Request with #MRQ_MODULE_MAIL
*/
struct mrq_module_mail_request {
- /** @brief handle to the previously loaded module */
+ /** @brief Handle to the previously loaded module */
uint32_t base;
- /** @brief module-specific mail payload
+ /** @brief Module-specific mail payload
*
* The length of data[ ] is unknown to the BPMP core firmware
* but it is limited to the size of an IPC message.
@@ -484,23 +526,24 @@ struct mrq_module_mail_request {
/**
* @ingroup Module
- * @brief response to #MRQ_MODULE_MAIL
+ * @brief Response to #MRQ_MODULE_MAIL
*/
struct mrq_module_mail_response {
- /** @brief module-specific mail payload
+ /** @brief Module-specific mail payload
*
* The length of data[ ] is unknown to the BPMP core firmware
* but it is limited to the size of an IPC message.
*/
uint8_t data[EMPTY_ARRAY];
} __ABI_PACKED;
+/** @endcond */
/**
* @ingroup MRQ_Codes
* @def MRQ_DEBUGFS
* @brief Interact with BPMP's debugfs file nodes
*
- * * Platforms: T186
+ * * Platforms: T186, T194
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_debugfs_request
@@ -529,65 +572,70 @@ struct mrq_module_mail_response {
*
* @}
*/
+
/** @ingroup Debugfs */
enum mrq_debugfs_commands {
+ /** @brief Perform read */
CMD_DEBUGFS_READ = 1,
+ /** @brief Perform write */
CMD_DEBUGFS_WRITE = 2,
+ /** @brief Perform dumping directory */
CMD_DEBUGFS_DUMPDIR = 3,
+ /** @brief Not a command */
CMD_DEBUGFS_MAX
};
/**
* @ingroup Debugfs
- * @brief parameters for CMD_DEBUGFS_READ/WRITE command
+ * @brief Parameters for CMD_DEBUGFS_READ/WRITE command
*/
struct cmd_debugfs_fileop_request {
- /** @brief physical address pointing at filename */
+ /** @brief Physical address pointing at filename */
uint32_t fnameaddr;
- /** @brief length in bytes of filename buffer */
+ /** @brief Length in bytes of filename buffer */
uint32_t fnamelen;
- /** @brief physical address pointing to data buffer */
+ /** @brief Physical address pointing to data buffer */
uint32_t dataaddr;
- /** @brief length in bytes of data buffer */
+ /** @brief Length in bytes of data buffer */
uint32_t datalen;
} __ABI_PACKED;
/**
* @ingroup Debugfs
- * @brief parameters for CMD_DEBUGFS_READ/WRITE command
+ * @brief Parameters for CMD_DEBUGFS_READ/WRITE command
*/
struct cmd_debugfs_dumpdir_request {
- /** @brief physical address pointing to data buffer */
+ /** @brief Physical address pointing to data buffer */
uint32_t dataaddr;
- /** @brief length in bytes of data buffer */
+ /** @brief Length in bytes of data buffer */
uint32_t datalen;
} __ABI_PACKED;
/**
* @ingroup Debugfs
- * @brief response data for CMD_DEBUGFS_READ/WRITE command
+ * @brief Response data for CMD_DEBUGFS_READ/WRITE command
*/
struct cmd_debugfs_fileop_response {
- /** @brief always 0 */
+ /** @brief Always 0 */
uint32_t reserved;
- /** @brief number of bytes read from or written to data buffer */
+ /** @brief Number of bytes read from or written to data buffer */
uint32_t nbytes;
} __ABI_PACKED;
/**
* @ingroup Debugfs
- * @brief response data for CMD_DEBUGFS_DUMPDIR command
+ * @brief Response data for CMD_DEBUGFS_DUMPDIR command
*/
struct cmd_debugfs_dumpdir_response {
- /** @brief always 0 */
+ /** @brief Always 0 */
uint32_t reserved;
- /** @brief number of bytes read from or written to data buffer */
+ /** @brief Number of bytes read from or written to data buffer */
uint32_t nbytes;
} __ABI_PACKED;
/**
* @ingroup Debugfs
- * @brief request with #MRQ_DEBUGFS.
+ * @brief Request with #MRQ_DEBUGFS.
*
* The sender of an MRQ_DEBUGFS message uses #cmd to specify a debugfs
* command to execute. Legal commands are the values of @ref
@@ -601,6 +649,7 @@ struct cmd_debugfs_dumpdir_response {
* |CMD_DEBUGFS_DUMPDIR|dumpdir|
*/
struct mrq_debugfs_request {
+ /** @brief Sub-command (@ref mrq_debugfs_commands) */
uint32_t cmd;
union {
struct cmd_debugfs_fileop_request fop;
@@ -612,14 +661,14 @@ struct mrq_debugfs_request {
* @ingroup Debugfs
*/
struct mrq_debugfs_response {
- /** @brief always 0 */
+ /** @brief Always 0 */
int32_t reserved;
union {
- /** @brief response data for CMD_DEBUGFS_READ OR
+ /** @brief Response data for CMD_DEBUGFS_READ OR
* CMD_DEBUGFS_WRITE command
*/
struct cmd_debugfs_fileop_response fop;
- /** @brief response data for CMD_DEBUGFS_DUMPDIR command */
+ /** @brief Response data for CMD_DEBUGFS_DUMPDIR command */
struct cmd_debugfs_dumpdir_response dumpdir;
} __UNION_ANON;
} __ABI_PACKED;
@@ -633,57 +682,58 @@ struct mrq_debugfs_response {
#define DEBUGFS_S_IWUSR (1 << 7)
/** @} */
-
/**
* @ingroup MRQ_Codes
* @def MRQ_RESET
- * @brief reset an IP block
+ * @brief Reset an IP block
*
- * * Platforms: T186
+ * * Platforms: T186, T194
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_reset_request
* * Response Payload: @ref mrq_reset_response
+ *
+ * @addtogroup Reset
+ * @{
*/
-/**
- * @ingroup Reset
- */
enum mrq_reset_commands {
+ /** @brief Assert module reset */
CMD_RESET_ASSERT = 1,
+ /** @brief Deassert module reset */
CMD_RESET_DEASSERT = 2,
+ /** @brief Assert and deassert the module reset */
CMD_RESET_MODULE = 3,
+ /** @brief Get the highest reset ID */
CMD_RESET_GET_MAX_ID = 4,
- CMD_RESET_MAX, /* not part of ABI and subject to change */
+ /** @brief Not part of ABI and subject to change */
+ CMD_RESET_MAX,
};
/**
- * @ingroup Reset
- * @brief request with MRQ_RESET
+ * @brief Request with MRQ_RESET
*
* Used by the sender of an #MRQ_RESET message to request BPMP to
* assert or or deassert a given reset line.
*/
struct mrq_reset_request {
- /** @brief reset action to perform (@enum mrq_reset_commands) */
+ /** @brief Reset action to perform (@ref mrq_reset_commands) */
uint32_t cmd;
- /** @brief id of the reset to affected */
+ /** @brief Id of the reset to affected */
uint32_t reset_id;
} __ABI_PACKED;
/**
- * @ingroup Reset
* @brief Response for MRQ_RESET sub-command CMD_RESET_GET_MAX_ID. When
* this sub-command is not supported, firmware will return -BPMP_EBADCMD
* in mrq_response::err.
*/
struct cmd_reset_get_max_id_response {
- /** @brief max reset id */
+ /** @brief Max reset id */
uint32_t max_id;
} __ABI_PACKED;
/**
- * @ingroup Reset
* @brief Response with MRQ_RESET
*
* Each sub-command supported by @ref mrq_reset_request may return
@@ -703,32 +753,25 @@ struct mrq_reset_response {
} __UNION_ANON;
} __ABI_PACKED;
+/** @} */
+
/**
* @ingroup MRQ_Codes
* @def MRQ_I2C
- * @brief issue an i2c transaction
+ * @brief Issue an i2c transaction
*
- * * Platforms: T186
+ * * Platforms: T186, T194
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_i2c_request
* * Response Payload: @ref mrq_i2c_response
- */
-
-/**
+ *
* @addtogroup I2C
* @{
*/
#define TEGRA_I2C_IPC_MAX_IN_BUF_SIZE (MSG_DATA_MIN_SZ - 12)
#define TEGRA_I2C_IPC_MAX_OUT_BUF_SIZE (MSG_DATA_MIN_SZ - 4)
-/** @} */
-/**
- * @ingroup I2C
- * @name Serial I2C flags
- * Use these flags with serial_i2c_request::flags
- * @{
- */
#define SERIALI2C_TEN 0x0010
#define SERIALI2C_RD 0x0001
#define SERIALI2C_STOP 0x8000
@@ -737,15 +780,13 @@ struct mrq_reset_response {
#define SERIALI2C_IGNORE_NAK 0x1000
#define SERIALI2C_NO_RD_ACK 0x0800
#define SERIALI2C_RECV_LEN 0x0400
-/** @} */
-/** @ingroup I2C */
+
enum {
CMD_I2C_XFER = 1
};
/**
- * @ingroup I2C
- * @brief serializable i2c request
+ * @brief Serializable i2c request
*
* Instances of this structure are packed (little-endian) into
* cmd_i2c_xfer_request::data_buf. Each instance represents a single
@@ -762,80 +803,75 @@ enum {
struct serial_i2c_request {
/** @brief I2C slave address */
uint16_t addr;
- /** @brief bitmask of SERIALI2C_ flags */
+ /** @brief Bitmask of SERIALI2C_ flags */
uint16_t flags;
- /** @brief length of I2C transaction in bytes */
+ /** @brief Length of I2C transaction in bytes */
uint16_t len;
- /** @brief for write transactions only, #len bytes of data */
+ /** @brief For write transactions only, #len bytes of data */
uint8_t data[];
} __ABI_PACKED;
/**
- * @ingroup I2C
- * @brief trigger one or more i2c transactions
+ * @brief Trigger one or more i2c transactions
*/
struct cmd_i2c_xfer_request {
- /** @brief valid bus number from mach-t186/i2c-t186.h*/
+ /** @brief Valid bus number from @ref bpmp_i2c_ids*/
uint32_t bus_id;
- /** @brief count of valid bytes in #data_buf*/
+ /** @brief Count of valid bytes in #data_buf*/
uint32_t data_size;
- /** @brief serialized packed instances of @ref serial_i2c_request*/
+ /** @brief Serialized packed instances of @ref serial_i2c_request*/
uint8_t data_buf[TEGRA_I2C_IPC_MAX_IN_BUF_SIZE];
} __ABI_PACKED;
/**
- * @ingroup I2C
- * @brief container for data read from the i2c bus
+ * @brief Container for data read from the i2c bus
*
* Processing an cmd_i2c_xfer_request::data_buf causes BPMP to execute
* zero or more I2C reads. The data read from the bus is serialized
* into #data_buf.
*/
struct cmd_i2c_xfer_response {
- /** @brief count of valid bytes in #data_buf*/
+ /** @brief Count of valid bytes in #data_buf*/
uint32_t data_size;
- /** @brief i2c read data */
+ /** @brief I2c read data */
uint8_t data_buf[TEGRA_I2C_IPC_MAX_OUT_BUF_SIZE];
} __ABI_PACKED;
/**
- * @ingroup I2C
- * @brief request with #MRQ_I2C
+ * @brief Request with #MRQ_I2C
*/
struct mrq_i2c_request {
- /** @brief always CMD_I2C_XFER (i.e. 1) */
+ /** @brief Always CMD_I2C_XFER (i.e. 1) */
uint32_t cmd;
- /** @brief parameters of the transfer request */
+ /** @brief Parameters of the transfer request */
struct cmd_i2c_xfer_request xfer;
} __ABI_PACKED;
/**
- * @ingroup I2C
- * @brief response to #MRQ_I2C
+ * @brief Response to #MRQ_I2C
*/
struct mrq_i2c_response {
struct cmd_i2c_xfer_response xfer;
} __ABI_PACKED;
+/** @} */
+
/**
* @ingroup MRQ_Codes
* @def MRQ_CLK
+ * @brief Perform a clock operation
*
- * * Platforms: T186
+ * * Platforms: T186, T194
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_clk_request
* * Response Payload: @ref mrq_clk_response
+ *
* @addtogroup Clocks
* @{
*/
-
-/**
- * @name MRQ_CLK sub-commands
- * @{
- */
enum {
CMD_CLK_GET_RATE = 1,
CMD_CLK_SET_RATE = 2,
@@ -847,20 +883,13 @@ enum {
CMD_CLK_DISABLE = 8,
CMD_CLK_GET_ALL_INFO = 14,
CMD_CLK_GET_MAX_CLK_ID = 15,
+ CMD_CLK_GET_FMAX_AT_VMIN = 16,
CMD_CLK_MAX,
};
-/** @} */
-/**
- * @name MRQ_CLK properties
- * Flag bits for cmd_clk_properties_response::flags and
- * cmd_clk_get_all_info_response::flags
- * @{
- */
#define BPMP_CLK_HAS_MUX (1 << 0)
#define BPMP_CLK_HAS_SET_RATE (1 << 1)
#define BPMP_CLK_IS_ROOT (1 << 2)
-/** @} */
#define MRQ_CLK_NAME_MAXLEN 40
#define MRQ_CLK_MAX_PARENTS 16
@@ -959,11 +988,19 @@ struct cmd_clk_get_max_clk_id_request {
struct cmd_clk_get_max_clk_id_response {
uint32_t max_id;
} __ABI_PACKED;
-/** @} */
+
+/** @private */
+struct cmd_clk_get_fmax_at_vmin_request {
+ EMPTY
+} __ABI_PACKED;
+
+struct cmd_clk_get_fmax_at_vmin_response {
+ int64_t rate;
+} __ABI_PACKED;
/**
* @ingroup Clocks
- * @brief request with #MRQ_CLK
+ * @brief Request with #MRQ_CLK
*
* Used by the sender of an #MRQ_CLK message to control clocks. The
* clk_request is split into several sub-commands. Some sub-commands
@@ -982,11 +1019,13 @@ struct cmd_clk_get_max_clk_id_response {
* |CMD_CLK_DISABLE |- |
* |CMD_CLK_GET_ALL_INFO |- |
* |CMD_CLK_GET_MAX_CLK_ID |- |
+ * |CMD_CLK_GET_FMAX_AT_VMIN |-
+ * |
*
*/
struct mrq_clk_request {
- /** @brief sub-command and clock id concatenated to 32-bit word.
+ /** @brief Sub-command and clock id concatenated to 32-bit word.
* - bits[31..24] is the sub-cmd.
* - bits[23..0] is the clock id
*/
@@ -1010,12 +1049,14 @@ struct mrq_clk_request {
struct cmd_clk_get_all_info_request clk_get_all_info;
/** @private */
struct cmd_clk_get_max_clk_id_request clk_get_max_clk_id;
+ /** @private */
+ struct cmd_clk_get_fmax_at_vmin_request clk_get_fmax_at_vmin;
} __UNION_ANON;
} __ABI_PACKED;
/**
* @ingroup Clocks
- * @brief response to MRQ_CLK
+ * @brief Response to MRQ_CLK
*
* Each sub-command supported by @ref mrq_clk_request may return
* sub-command-specific data. Some do and some do not as indicated in
@@ -1033,6 +1074,7 @@ struct mrq_clk_request {
* |CMD_CLK_DISABLE |- |
* |CMD_CLK_GET_ALL_INFO |clk_get_all_info |
* |CMD_CLK_GET_MAX_CLK_ID |clk_get_max_id |
+ * |CMD_CLK_GET_FMAX_AT_VMIN |clk_get_fmax_at_vmin |
*
*/
@@ -1050,13 +1092,16 @@ struct mrq_clk_response {
struct cmd_clk_is_enabled_response clk_is_enabled;
struct cmd_clk_get_all_info_response clk_get_all_info;
struct cmd_clk_get_max_clk_id_response clk_get_max_clk_id;
+ struct cmd_clk_get_fmax_at_vmin_response clk_get_fmax_at_vmin;
} __UNION_ANON;
} __ABI_PACKED;
+/** @} */
+
/**
* @ingroup MRQ_Codes
* @def MRQ_QUERY_ABI
- * @brief check if an MRQ is implemented
+ * @brief Check if an MRQ is implemented
*
* * Platforms: All
* * Initiators: Any
@@ -1067,7 +1112,7 @@ struct mrq_clk_response {
/**
* @ingroup ABI_info
- * @brief request with MRQ_QUERY_ABI
+ * @brief Request with MRQ_QUERY_ABI
*
* Used by #MRQ_QUERY_ABI call to check if MRQ code #mrq is supported
* by the recipient.
@@ -1079,7 +1124,7 @@ struct mrq_query_abi_request {
/**
* @ingroup ABI_info
- * @brief response to MRQ_QUERY_ABI
+ * @brief Response to MRQ_QUERY_ABI
*
* @note mrq_response::err of 0 indicates that the query was
* successful, not that the MRQ itself is supported!
@@ -1092,19 +1137,19 @@ struct mrq_query_abi_response {
/**
* @ingroup MRQ_Codes
* @def MRQ_PG_READ_STATE
- * @brief read the power-gating state of a partition
+ * @brief Read the power-gating state of a partition
*
* * Platforms: T186
+ * @cond bpmp_t186
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_pg_read_state_request
* * Response Payload: @ref mrq_pg_read_state_response
- * @addtogroup Powergating
- * @{
*/
/**
- * @brief request with #MRQ_PG_READ_STATE
+ * @ingroup Powergating
+ * @brief Request with #MRQ_PG_READ_STATE
*
* Used by MRQ_PG_READ_STATE call to read the current state of a
* partition.
@@ -1115,39 +1160,40 @@ struct mrq_pg_read_state_request {
} __ABI_PACKED;
/**
- * @brief response to MRQ_PG_READ_STATE
+ * @ingroup Powergating
+ * @brief Response to MRQ_PG_READ_STATE
* @todo define possible errors.
*/
struct mrq_pg_read_state_response {
- /** @brief read as don't care */
+ /** @brief Read as don't care */
uint32_t sram_state;
- /** @brief state of power partition
+ /** @brief State of power partition
* * 0 : off
* * 1 : on
*/
uint32_t logic_state;
} __ABI_PACKED;
-
+/** @endcond*/
/** @} */
/**
* @ingroup MRQ_Codes
* @def MRQ_PG_UPDATE_STATE
- * @brief modify the power-gating state of a partition. In contrast to
+ * @brief Modify the power-gating state of a partition. In contrast to
* MRQ_PG calls, the operations that change state (on/off) of power
* partition are reference counted.
*
* * Platforms: T186
+ * @cond bpmp_t186
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_pg_update_state_request
* * Response Payload: N/A
- * @addtogroup Powergating
- * @{
*/
/**
- * @brief request with mrq_pg_update_state_request
+ * @ingroup Powergating
+ * @brief Request with mrq_pg_update_state_request
*
* Used by #MRQ_PG_UPDATE_STATE call to request BPMP to change the
* state of a power partition #partition_id.
@@ -1155,20 +1201,20 @@ struct mrq_pg_read_state_response {
struct mrq_pg_update_state_request {
/** @brief ID of partition */
uint32_t partition_id;
- /** @brief secondary control of power partition
+ /** @brief Secondary control of power partition
* @details Ignored by many versions of the BPMP
* firmware. For maximum compatibility, set the value
- * according to @logic_state
+ * according to @ref logic_state
* * 0x1: power ON partition (@ref logic_state == 0x3)
* * 0x3: power OFF partition (@ref logic_state == 0x1)
*/
uint32_t sram_state;
- /** @brief controls state of power partition, legal values are
+ /** @brief Controls state of power partition, legal values are
* * 0x1 : power OFF partition
* * 0x3 : power ON partition
*/
uint32_t logic_state;
- /** @brief change state of clocks of the power partition, legal values
+ /** @brief Change state of clocks of the power partition, legal values
* * 0x0 : do not change clock state
* * 0x1 : disable partition clocks (only applicable when
* @ref logic_state == 0x1)
@@ -1177,7 +1223,7 @@ struct mrq_pg_update_state_request {
*/
uint32_t clock_state;
} __ABI_PACKED;
-/** @} */
+/** @endcond*/
/**
* @ingroup MRQ_Codes
@@ -1186,19 +1232,20 @@ struct mrq_pg_update_state_request {
* MRQ_PG_UPDATE_STATE, operations that change the power partition
* state are NOT reference counted
*
- * * Platforms: T186
+ * @note BPMP-FW forcefully turns off some partitions as part of SC7 entry
+ * because their state cannot be adequately restored on exit. Therefore,
+ * it is recommended to power off all domains via MRQ_PG prior to SC7 entry.
+ * See @ref bpmp_pdomain_ids for further detail.
+ *
+ * * Platforms: T186, T194
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_pg_request
* * Response Payload: @ref mrq_pg_response
+ *
* @addtogroup Powergating
* @{
*/
-
-/**
- * @name MRQ_PG sub-commands
- * @{
- */
enum mrq_pg_cmd {
/**
* @brief Check whether the BPMP driver supports the specified
@@ -1232,7 +1279,7 @@ enum mrq_pg_cmd {
CMD_PG_GET_STATE = 2,
/**
- * @brief get the name string of specified power domain id.
+ * @brief Get the name string of specified power domain id.
*
* mrq_response:err is
* 0: Success
@@ -1242,7 +1289,7 @@ enum mrq_pg_cmd {
/**
- * @brief get the highest power domain id in the system. Not
+ * @brief Get the highest power domain id in the system. Not
* all IDs between 0 and max_id are valid IDs.
*
* mrq_response:err is
@@ -1251,35 +1298,36 @@ enum mrq_pg_cmd {
*/
CMD_PG_GET_MAX_ID = 4,
};
-/** @} */
#define MRQ_PG_NAME_MAXLEN 40
-/**
- * @brief possible power domain states in
- * cmd_pg_set_state_request:state and cmd_pg_get_state_response:state.
- * PG_STATE_OFF: power domain is OFF
- * PG_STATE_ON: power domain is ON
- * PG_STATE_RUNNING: power domain is ON and made into directly usable
- * state by turning on the clocks associated with
- * the domain
- */
enum pg_states {
+ /** @brief Power domain is OFF */
PG_STATE_OFF = 0,
+ /** @brief Power domain is ON */
PG_STATE_ON = 1,
+ /**
+ * @brief a legacy state where power domain and the clock
+ * associated to the domain are ON.
+ * This state is only supported in T186, and the use of it is
+ * deprecated.
+ */
PG_STATE_RUNNING = 2,
};
struct cmd_pg_query_abi_request {
- uint32_t type; /* enum mrq_pg_cmd */
+ /** @ref mrq_pg_cmd */
+ uint32_t type;
} __ABI_PACKED;
struct cmd_pg_set_state_request {
- uint32_t state; /* enum pg_states */
+ /** @ref pg_states */
+ uint32_t state;
} __ABI_PACKED;
struct cmd_pg_get_state_response {
- uint32_t state; /* enum pg_states */
+ /** @ref pg_states */
+ uint32_t state;
} __ABI_PACKED;
struct cmd_pg_get_name_response {
@@ -1291,8 +1339,7 @@ struct cmd_pg_get_max_id_response {
} __ABI_PACKED;
/**
- * @ingroup Powergating
- * @brief request with #MRQ_PG
+ * @brief Request with #MRQ_PG
*
* Used by the sender of an #MRQ_PG message to control power
* partitions. The pg_request is split into several sub-commands. Some
@@ -1308,7 +1355,6 @@ struct cmd_pg_get_max_id_response {
* |CMD_PG_GET_MAX_ID | - |
*
*/
-
struct mrq_pg_request {
uint32_t cmd;
uint32_t id;
@@ -1319,8 +1365,7 @@ struct mrq_pg_request {
} __ABI_PACKED;
/**
- * @ingroup Powergating
- * @brief response to MRQ_PG
+ * @brief Response to MRQ_PG
*
* Each sub-command supported by @ref mrq_pg_request may return
* sub-command-specific data. Some do and some do not as indicated in
@@ -1333,9 +1378,7 @@ struct mrq_pg_request {
* |CMD_PG_GET_STATE | get_state |
* |CMD_PG_GET_NAME | get_name |
* |CMD_PG_GET_MAX_ID | get_max_id |
- *
*/
-
struct mrq_pg_response {
union {
struct cmd_pg_get_state_response get_state;
@@ -1344,12 +1387,14 @@ struct mrq_pg_response {
} __UNION_ANON;
} __ABI_PACKED;
+/** @} */
+
/**
* @ingroup MRQ_Codes
* @def MRQ_THERMAL
- * @brief interact with BPMP thermal framework
+ * @brief Interact with BPMP thermal framework
*
- * * Platforms: T186
+ * * Platforms: T186, T194
* * Initiators: Any
* * Targets: Any
* * Request Payload: TODO
@@ -1562,17 +1607,18 @@ union mrq_thermal_bpmp_to_host_response {
* @brief Query CPU voltage hint data
*
* * Platforms: T186
+ * @cond bpmp_t186
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_cpu_vhint_request
* * Response Payload: N/A
*
- * @addtogroup Vhint CPU Voltage hint
+ * @addtogroup Vhint
* @{
*/
/**
- * @brief request with #MRQ_CPU_VHINT
+ * @brief Request with #MRQ_CPU_VHINT
*
* Used by #MRQ_CPU_VHINT call by CCPLEX to retrieve voltage hint data
* from BPMP to memory space pointed by #addr. CCPLEX is responsible
@@ -1581,16 +1627,16 @@ union mrq_thermal_bpmp_to_host_response {
*/
struct mrq_cpu_vhint_request {
/** @brief IOVA address for the #cpu_vhint_data */
- uint32_t addr; /* struct cpu_vhint_data * */
+ uint32_t addr;
/** @brief ID of the cluster whose data is requested */
- uint32_t cluster_id; /* enum cluster_id */
+ uint32_t cluster_id;
} __ABI_PACKED;
/**
- * @brief description of the CPU v/f relation
+ * @brief Description of the CPU v/f relation
*
- * Used by #MRQ_CPU_VHINT call to carry data pointed by #addr of
- * struct mrq_cpu_vhint_request
+ * Used by #MRQ_CPU_VHINT call to carry data pointed by
+ * #mrq_cpu_vhint_request::addr
*/
struct cpu_vhint_data {
uint32_t ref_clk_hz; /**< reference frequency in Hz */
@@ -1612,7 +1658,7 @@ struct cpu_vhint_data {
/** reserved for future use */
uint16_t reserved[328];
} __ABI_PACKED;
-
+/** @endcond */
/** @} */
/**
@@ -1620,7 +1666,7 @@ struct cpu_vhint_data {
* @def MRQ_ABI_RATCHET
* @brief ABI ratchet value query
*
- * * Platforms: T186
+ * * Platforms: T186, T194
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_abi_ratchet_request
@@ -1630,7 +1676,7 @@ struct cpu_vhint_data {
*/
/**
- * @brief an ABI compatibility mechanism
+ * @brief An ABI compatibility mechanism
*
* BPMP_ABI_RATCHET_VALUE may increase for various reasons in a future
* revision of this header file.
@@ -1644,7 +1690,7 @@ struct cpu_vhint_data {
#define BPMP_ABI_RATCHET_VALUE 3
/**
- * @brief request with #MRQ_ABI_RATCHET.
+ * @brief Request with #MRQ_ABI_RATCHET.
*
* #ratchet should be #BPMP_ABI_RATCHET_VALUE from the ABI header
* against which the requester was compiled.
@@ -1657,12 +1703,12 @@ struct cpu_vhint_data {
* Otherwise, err shall be 0.
*/
struct mrq_abi_ratchet_request {
- /** @brief requester's ratchet value */
+ /** @brief Requester's ratchet value */
uint16_t ratchet;
};
/**
- * @brief response to #MRQ_ABI_RATCHET
+ * @brief Response to #MRQ_ABI_RATCHET
*
* #ratchet shall be #BPMP_ABI_RATCHET_VALUE from the ABI header
* against which BPMP firwmare was compiled.
@@ -1685,9 +1731,9 @@ struct mrq_abi_ratchet_response {
/**
* @ingroup MRQ_Codes
* @def MRQ_EMC_DVFS_LATENCY
- * @brief query frequency dependent EMC DVFS latency
+ * @brief Query frequency dependent EMC DVFS latency
*
- * * Platforms: T186
+ * * Platforms: T186, T194
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: N/A
@@ -1697,7 +1743,7 @@ struct mrq_abi_ratchet_response {
*/
/**
- * @brief used by @ref mrq_emc_dvfs_latency_response
+ * @brief Used by @ref mrq_emc_dvfs_latency_response
*/
struct emc_dvfs_latency {
/** @brief EMC frequency in kHz */
@@ -1708,10 +1754,10 @@ struct emc_dvfs_latency {
#define EMC_DVFS_LATENCY_MAX_SIZE 14
/**
- * @brief response to #MRQ_EMC_DVFS_LATENCY
+ * @brief Response to #MRQ_EMC_DVFS_LATENCY
*/
struct mrq_emc_dvfs_latency_response {
- /** @brief the number valid entries in #pairs */
+ /** @brief The number valid entries in #pairs */
uint32_t num_pairs;
/** @brief EMC <frequency, latency> information */
struct emc_dvfs_latency pairs[EMC_DVFS_LATENCY_MAX_SIZE];
@@ -1721,8 +1767,96 @@ struct mrq_emc_dvfs_latency_response {
/**
* @ingroup MRQ_Codes
+ * @def MRQ_CPU_NDIV_LIMITS
+ * @brief CPU freq. limits in ndiv
+ *
+ * * Platforms: T194 onwards
+ * @cond bpmp_t194
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_cpu_ndiv_limits_request
+ * * Response Payload: @ref mrq_cpu_ndiv_limits_response
+ * @addtogroup CPU
+ * @{
+ */
+
+/**
+ * @brief Request for ndiv limits of a cluster
+ */
+struct mrq_cpu_ndiv_limits_request {
+ /** @brief Enum cluster_id */
+ uint32_t cluster_id;
+} __ABI_PACKED;
+
+/**
+ * @brief Response to #MRQ_CPU_NDIV_LIMITS
+ */
+struct mrq_cpu_ndiv_limits_response {
+ /** @brief Reference frequency in Hz */
+ uint32_t ref_clk_hz;
+ /** @brief Post divider value */
+ uint16_t pdiv;
+ /** @brief Input divider value */
+ uint16_t mdiv;
+ /** @brief FMAX expressed with max NDIV value */
+ uint16_t ndiv_max;
+ /** @brief Minimum allowed NDIV value */
+ uint16_t ndiv_min;
+} __ABI_PACKED;
+
+/** @} */
+/** @endcond */
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_CPU_AUTO_CC3
+ * @brief Query CPU cluster auto-CC3 configuration
+ *
+ * * Platforms: T194 onwards
+ * @cond bpmp_t194
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_cpu_auto_cc3_request
+ * * Response Payload: @ref mrq_cpu_auto_cc3_response
+ * @addtogroup CC3
+ *
+ * Queries from BPMP auto-CC3 configuration (allowed/not allowed) for a
+ * specified cluster. CCPLEX s/w uses this information to override its own
+ * device tree auto-CC3 settings, so that BPMP device tree is a single source of
+ * auto-CC3 platform configuration.
+ *
+ * @{
+ */
+
+/**
+ * @brief Request for auto-CC3 configuration of a cluster
+ */
+struct mrq_cpu_auto_cc3_request {
+ /** @brief Enum cluster_id (logical cluster id, known to CCPLEX s/w) */
+ uint32_t cluster_id;
+} __ABI_PACKED;
+
+/**
+ * @brief Response to #MRQ_CPU_AUTO_CC3
+ */
+struct mrq_cpu_auto_cc3_response {
+ /**
+ * @brief auto-CC3 configuration
+ *
+ * - bits[31..10] reserved.
+ * - bits[9..1] cc3 ndiv
+ * - bit [0] if "1" auto-CC3 is allowed, if "0" auto-CC3 is not allowed
+ */
+ uint32_t auto_cc3_config;
+} __ABI_PACKED;
+
+/** @} */
+/** @endcond */
+
+/**
+ * @ingroup MRQ_Codes
* @def MRQ_TRACE_ITER
- * @brief manage the trace iterator
+ * @brief Manage the trace iterator
*
* * Platforms: All
* * Initiators: CCPLEX
@@ -1735,12 +1869,12 @@ struct mrq_emc_dvfs_latency_response {
enum {
/** @brief (re)start the tracing now. Ignore older events */
TRACE_ITER_INIT = 0,
- /** @brief clobber all events in the trace buffer */
+ /** @brief Clobber all events in the trace buffer */
TRACE_ITER_CLEAN = 1
};
/**
- * @brief request with #MRQ_TRACE_ITER
+ * @brief Request with #MRQ_TRACE_ITER
*/
struct mrq_trace_iter_request {
/** @brief TRACE_ITER_INIT or TRACE_ITER_CLEAN */
@@ -1900,7 +2034,7 @@ struct cmd_ringbuf_console_get_fifo_resp {
*/
struct mrq_ringbuf_console_host_to_bpmp_request {
/**
- * @brief type of request. Values listed in enum
+ * @brief Type of request. Values listed in enum
* #mrq_ringbuf_console_host_to_bpmp_cmd.
*/
uint32_t type;
@@ -1927,49 +2061,616 @@ union mrq_ringbuf_console_bpmp_to_host_response {
} __ABI_PACKED;
/** @} */
-/*
- * 4. Enumerations
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_STRAP
+ * @brief Set a strap value controlled by BPMP
+ *
+ * * Platforms: T194 onwards
+ * @cond bpmp_t194
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_strap_request
+ * * Response Payload: N/A
+ * @addtogroup Strap
+ *
+ * A strap is an input that is sampled by a hardware unit during the
+ * unit's startup process. The sampled value of a strap affects the
+ * behavior of the unit until the unit is restarted. Many hardware
+ * units sample their straps at the instant that their resets are
+ * deasserted.
+ *
+ * BPMP owns registers which act as straps to various units. It
+ * exposes limited control of those straps via #MRQ_STRAP.
+ *
+ * @{
*/
+enum mrq_strap_cmd {
+ /** @private */
+ STRAP_RESERVED = 0,
+ /** @brief Set a strap value */
+ STRAP_SET = 1
+};
-/*
- * 4.1 CPU enumerations
+/**
+ * @brief Request with #MRQ_STRAP
+ */
+struct mrq_strap_request {
+ /** @brief @ref mrq_strap_cmd */
+ uint32_t cmd;
+ /** @brief Strap ID from @ref Strap_Ids */
+ uint32_t id;
+ /** @brief Desired value for strap (if cmd is #STRAP_SET) */
+ uint32_t value;
+} __ABI_PACKED;
+
+/**
+ * @defgroup Strap_Ids Strap Identifiers
+ * @}
+ */
+/** @endcond */
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_UPHY
+ * @brief Perform a UPHY operation
*
- * See <mach-t186/system-t186.h>
+ * * Platforms: T194 onwards
+ * @cond bpmp_t194
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_uphy_request
+ * * Response Payload: @ref mrq_uphy_response
*
- * 4.2 CPU Cluster enumerations
+ * @addtogroup UPHY
+ * @{
+ */
+enum {
+ CMD_UPHY_PCIE_LANE_MARGIN_CONTROL = 1,
+ CMD_UPHY_PCIE_LANE_MARGIN_STATUS = 2,
+ CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT = 3,
+ CMD_UPHY_PCIE_CONTROLLER_STATE = 4,
+ CMD_UPHY_MAX,
+};
+
+struct cmd_uphy_margin_control_request {
+ /** @brief Enable margin */
+ int32_t en;
+ /** @brief Clear the number of error and sections */
+ int32_t clr;
+ /** @brief Set x offset (1's complement) for left/right margin type (y should be 0) */
+ uint32_t x;
+ /** @brief Set y offset (1's complement) for left/right margin type (x should be 0) */
+ uint32_t y;
+ /** @brief Set number of bit blocks for each margin section */
+ uint32_t nblks;
+} __ABI_PACKED;
+
+struct cmd_uphy_margin_status_response {
+ /** @brief Number of errors observed */
+ uint32_t status;
+} __ABI_PACKED;
+
+struct cmd_uphy_ep_controller_pll_init_request {
+ /** @brief EP controller number, valid: 0, 4, 5 */
+ uint8_t ep_controller;
+} __ABI_PACKED;
+
+struct cmd_uphy_pcie_controller_state_request {
+ /** @brief PCIE controller number, valid: 0, 1, 2, 3, 4 */
+ uint8_t pcie_controller;
+ uint8_t enable;
+} __ABI_PACKED;
+
+/**
+ * @ingroup UPHY
+ * @brief Request with #MRQ_UPHY
*
- * See <mach-t186/system-t186.h>
+ * Used by the sender of an #MRQ_UPHY message to control UPHY Lane RX margining.
+ * The uphy_request is split into several sub-commands. Some sub-commands
+ * require no additional data. Others have a sub-command specific payload
*
- * 4.3 System low power state enumerations
+ * |sub-command |payload |
+ * |------------------------------------ |----------------------------------------|
+ * |CMD_UPHY_PCIE_LANE_MARGIN_CONTROL |uphy_set_margin_control |
+ * |CMD_UPHY_PCIE_LANE_MARGIN_STATUS | |
+ * |CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT |cmd_uphy_ep_controller_pll_init_request |
+ * |CMD_UPHY_PCIE_CONTROLLER_STATE |cmd_uphy_pcie_controller_state_request |
*
- * See <mach-t186/system-t186.h>
*/
-/*
- * 4.4 Clock enumerations
+struct mrq_uphy_request {
+ /** @brief Lane number. */
+ uint16_t lane;
+ /** @brief Sub-command id. */
+ uint16_t cmd;
+
+ union {
+ struct cmd_uphy_margin_control_request uphy_set_margin_control;
+ struct cmd_uphy_ep_controller_pll_init_request ep_ctrlr_pll_init;
+ struct cmd_uphy_pcie_controller_state_request controller_state;
+ } __UNION_ANON;
+} __ABI_PACKED;
+
+/**
+ * @ingroup UPHY
+ * @brief Response to MRQ_UPHY
+ *
+ * Each sub-command supported by @ref mrq_uphy_request may return
+ * sub-command-specific data. Some do and some do not as indicated in
+ * the following table
+ *
+ * |sub-command |payload |
+ * |---------------------------- |------------------------|
+ * |CMD_UPHY_PCIE_LANE_MARGIN_CONTROL | |
+ * |CMD_UPHY_PCIE_LANE_MARGIN_STATUS |uphy_get_margin_status |
*
- * For clock enumerations, see <mach-t186/clk-t186.h>
*/
-/*
- * 4.5 Reset enumerations
+struct mrq_uphy_response {
+ union {
+ struct cmd_uphy_margin_status_response uphy_get_margin_status;
+ } __UNION_ANON;
+} __ABI_PACKED;
+
+/** @} */
+/** @endcond */
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_FMON
+ * @brief Perform a frequency monitor configuration operations
+ *
+ * * Platforms: T194 onwards
+ * @cond bpmp_t194
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_fmon_request
+ * * Response Payload: @ref mrq_fmon_response
*
- * For reset enumerations, see <mach-t186/reset-t186.h>
+ * @addtogroup FMON
+ * @{
*/
+enum {
+ /**
+ * @brief Clamp FMON configuration to specified rate.
+ *
+ * The monitored clock must be running for clamp to succeed. If
+ * clamped, FMON configuration is preserved when clock rate
+ * and/or state is changed.
+ */
+ CMD_FMON_GEAR_CLAMP = 1,
+ /**
+ * @brief Release clamped FMON configuration.
+ *
+ * Allow FMON configuration to follow monitored clock rate
+ * and/or state changes.
+ */
+ CMD_FMON_GEAR_FREE = 2,
+ /**
+ * @brief Return rate FMON is clamped at, or 0 if FMON is not
+ * clamped.
+ *
+ * Inherently racy, since clamp state can be changed
+ * concurrently. Useful for testing.
+ */
+ CMD_FMON_GEAR_GET = 3,
+ CMD_FMON_NUM,
+};
-/*
- * 4.6 Thermal sensor enumerations
+struct cmd_fmon_gear_clamp_request {
+ int32_t unused;
+ int64_t rate;
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_fmon_gear_clamp_response {
+ EMPTY
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_fmon_gear_free_request {
+ EMPTY
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_fmon_gear_free_response {
+ EMPTY
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_fmon_gear_get_request {
+ EMPTY
+} __ABI_PACKED;
+
+struct cmd_fmon_gear_get_response {
+ int64_t rate;
+} __ABI_PACKED;
+
+/**
+ * @ingroup FMON
+ * @brief Request with #MRQ_FMON
+ *
+ * Used by the sender of an #MRQ_FMON message to configure clock
+ * frequency monitors. The FMON request is split into several
+ * sub-commands. Some sub-commands require no additional data.
+ * Others have a sub-command specific payload
+ *
+ * |sub-command |payload |
+ * |----------------------------|-----------------------|
+ * |CMD_FMON_GEAR_CLAMP |fmon_gear_clamp |
+ * |CMD_FMON_GEAR_FREE |- |
+ * |CMD_FMON_GEAR_GET |- |
+ *
+ */
+
+struct mrq_fmon_request {
+ /** @brief Sub-command and clock id concatenated to 32-bit word.
+ * - bits[31..24] is the sub-cmd.
+ * - bits[23..0] is monitored clock id used to select target
+ * FMON
+ */
+ uint32_t cmd_and_id;
+
+ union {
+ struct cmd_fmon_gear_clamp_request fmon_gear_clamp;
+ /** @private */
+ struct cmd_fmon_gear_free_request fmon_gear_free;
+ /** @private */
+ struct cmd_fmon_gear_get_request fmon_gear_get;
+ } __UNION_ANON;
+} __ABI_PACKED;
+
+/**
+ * @ingroup FMON
+ * @brief Response to MRQ_FMON
+ *
+ * Each sub-command supported by @ref mrq_fmon_request may
+ * return sub-command-specific data as indicated below.
+ *
+ * |sub-command |payload |
+ * |----------------------------|------------------------|
+ * |CMD_FMON_GEAR_CLAMP |- |
+ * |CMD_FMON_GEAR_FREE |- |
+ * |CMD_FMON_GEAR_GET |fmon_gear_get |
+ *
+ */
+
+struct mrq_fmon_response {
+ union {
+ /** @private */
+ struct cmd_fmon_gear_clamp_response fmon_gear_clamp;
+ /** @private */
+ struct cmd_fmon_gear_free_response fmon_gear_free;
+ struct cmd_fmon_gear_get_response fmon_gear_get;
+ } __UNION_ANON;
+} __ABI_PACKED;
+
+/** @} */
+/** @endcond */
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_EC
+ * @brief Provide status information on faults reported by Error
+ * Collator (EC) to HSM.
+ *
+ * * Platforms: T194 onwards
+ * @cond bpmp_t194
+ * * Initiators: CCPLEX
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_ec_request
+ * * Response Payload: @ref mrq_ec_response
+ *
+ * @note This MRQ ABI is under construction, and subject to change
+ *
+ * @addtogroup EC
+ * @{
+ */
+enum {
+ /**
+ * @brief Retrieve specified EC status.
+ *
+ * mrq_response::err is 0 if the operation was successful, or @n
+ * -#BPMP_ENODEV if target EC is not owned by BPMP @n
+ * -#BPMP_EACCES if target EC power domain is turned off
+ */
+ CMD_EC_STATUS_GET = 1,
+ CMD_EC_NUM,
+};
+
+/** @brief BPMP ECs error types */
+enum bpmp_ec_err_type {
+ /** @brief Parity error on internal data path
+ *
+ * Error descriptor @ref ec_err_simple_desc.
+ */
+ EC_ERR_TYPE_PARITY_INTERNAL = 1,
+
+ /** @brief ECC SEC error on internal data path
+ *
+ * Error descriptor @ref ec_err_simple_desc.
+ */
+ EC_ERR_TYPE_ECC_SEC_INTERNAL = 2,
+
+ /** @brief ECC DED error on internal data path
+ *
+ * Error descriptor @ref ec_err_simple_desc.
+ */
+ EC_ERR_TYPE_ECC_DED_INTERNAL = 3,
+
+ /** @brief Comparator error
+ *
+ * Error descriptor @ref ec_err_simple_desc.
+ */
+ EC_ERR_TYPE_COMPARATOR = 4,
+
+ /** @brief Register parity error
+ *
+ * Error descriptor @ref ec_err_reg_parity_desc.
+ */
+ EC_ERR_TYPE_REGISTER_PARITY = 5,
+
+ /** @brief Parity error from on-chip SRAM/FIFO
+ *
+ * Error descriptor @ref ec_err_simple_desc.
+ */
+ EC_ERR_TYPE_PARITY_SRAM = 6,
+
+ /** @brief Clock Monitor error
+ *
+ * Error descriptor @ref ec_err_fmon_desc.
+ */
+ EC_ERR_TYPE_CLOCK_MONITOR = 9,
+
+ /** @brief Voltage Monitor error
+ *
+ * Error descriptor @ref ec_err_vmon_desc.
+ */
+ EC_ERR_TYPE_VOLTAGE_MONITOR = 10,
+
+ /** @brief SW Correctable error
+ *
+ * Error descriptor @ref ec_err_simple_desc.
+ */
+ EC_ERR_TYPE_SW_CORRECTABLE = 16,
+
+ /** @brief SW Uncorrectable error
+ *
+ * Error descriptor @ref ec_err_simple_desc.
+ */
+ EC_ERR_TYPE_SW_UNCORRECTABLE = 17,
+
+ /** @brief Other HW Correctable error
+ *
+ * Error descriptor @ref ec_err_simple_desc.
+ */
+ EC_ERR_TYPE_OTHER_HW_CORRECTABLE = 32,
+
+ /** @brief Other HW Uncorrectable error
+ *
+ * Error descriptor @ref ec_err_simple_desc.
+ */
+ EC_ERR_TYPE_OTHER_HW_UNCORRECTABLE = 33,
+};
+
+/** @brief Group of registers with parity error. */
+enum ec_registers_group {
+ /** @brief Functional registers group */
+ EC_ERR_GROUP_FUNC_REG = 0,
+ /** @brief SCR registers group */
+ EC_ERR_GROUP_SCR_REG = 1,
+};
+
+/**
+ * @defgroup bpmp_ec_status_flags EC Status Flags
+ * @addtogroup bpmp_ec_status_flags
+ * @{
+ */
+/** @brief No EC error found flag */
+#define EC_STATUS_FLAG_NO_ERROR 0x0001
+/** @brief Last EC error found flag */
+#define EC_STATUS_FLAG_LAST_ERROR 0x0002
+/** @brief EC latent error flag */
+#define EC_STATUS_FLAG_LATENT_ERROR 0x0004
+/** @} */
+
+/**
+ * @defgroup bpmp_ec_desc_flags EC Descriptor Flags
+ * @addtogroup bpmp_ec_desc_flags
+ * @{
+ */
+/** @brief EC descriptor error resolved flag */
+#define EC_DESC_FLAG_RESOLVED 0x0001
+/** @brief EC descriptor failed to retrieve id flag */
+#define EC_DESC_FLAG_NO_ID 0x0002
+/** @} */
+
+/**
+ * |error type | fmon_clk_id values |
+ * |---------------------------------|---------------------------|
+ * |@ref EC_ERR_TYPE_CLOCK_MONITOR |@ref bpmp_clock_ids |
+ */
+struct ec_err_fmon_desc {
+ /** @brief Bitmask of @ref bpmp_ec_desc_flags */
+ uint16_t desc_flags;
+ /** @brief FMON monitored clock id */
+ uint16_t fmon_clk_id;
+ /** @brief Bitmask of @ref bpmp_fmon_faults_flags */
+ uint32_t fmon_faults;
+ /** @brief FMON faults access error */
+ int32_t fmon_access_error;
+} __ABI_PACKED;
+
+/**
+ * |error type | vmon_adc_id values |
+ * |---------------------------------|---------------------------|
+ * |@ref EC_ERR_TYPE_VOLTAGE_MONITOR |@ref bpmp_adc_ids |
+ */
+struct ec_err_vmon_desc {
+ /** @brief Bitmask of @ref bpmp_ec_desc_flags */
+ uint16_t desc_flags;
+ /** @brief VMON rail adc id */
+ uint16_t vmon_adc_id;
+ /** @brief Bitmask of @ref bpmp_vmon_faults_flags */
+ uint32_t vmon_faults;
+ /** @brief VMON faults access error */
+ int32_t vmon_access_error;
+} __ABI_PACKED;
+
+/**
+ * |error type | reg_id values |
+ * |---------------------------------|---------------------------|
+ * |@ref EC_ERR_TYPE_REGISTER_PARITY |@ref bpmp_ec_registers_ids |
+ */
+struct ec_err_reg_parity_desc {
+ /** @brief Bitmask of @ref bpmp_ec_desc_flags */
+ uint16_t desc_flags;
+ /** @brief Register id */
+ uint16_t reg_id;
+ /** @brief Register group @ref ec_registers_group */
+ uint16_t reg_group;
+} __ABI_PACKED;
+
+/**
+ * |error type | err_source_id values |
+ * |----------------------------------------|---------------------------|
+ * |@ref EC_ERR_TYPE_PARITY_INTERNAL |@ref bpmp_ec_ipath_ids |
+ * |@ref EC_ERR_TYPE_ECC_SEC_INTERNAL |@ref bpmp_ec_ipath_ids |
+ * |@ref EC_ERR_TYPE_ECC_DED_INTERNAL |@ref bpmp_ec_ipath_ids |
+ * |@ref EC_ERR_TYPE_COMPARATOR |@ref bpmp_ec_comparator_ids|
+ * |@ref EC_ERR_TYPE_PARITY_SRAM |@ref bpmp_clock_ids |
+ * |@ref EC_ERR_TYPE_SW_CORRECTABLE |@ref bpmp_ec_misc_ids |
+ * |@ref EC_ERR_TYPE_SW_UNCORRECTABLE |@ref bpmp_ec_misc_ids |
+ * |@ref EC_ERR_TYPE_OTHER_HW_CORRECTABLE |@ref bpmp_ec_misc_ids |
+ * |@ref EC_ERR_TYPE_OTHER_HW_UNCORRECTABLE |@ref bpmp_ec_misc_ids |
+ */
+struct ec_err_simple_desc {
+ /** @brief Bitmask of @ref bpmp_ec_desc_flags */
+ uint16_t desc_flags;
+ /** @brief Error source id. Id space depends on error type. */
+ uint16_t err_source_id;
+} __ABI_PACKED;
+
+/** @brief Union of EC error descriptors */
+union ec_err_desc {
+ struct ec_err_fmon_desc fmon_desc;
+ struct ec_err_vmon_desc vmon_desc;
+ struct ec_err_reg_parity_desc reg_parity_desc;
+ struct ec_err_simple_desc simple_desc;
+} __ABI_PACKED;
+
+struct cmd_ec_status_get_request {
+ /** @brief HSM error line number that identifies target EC. */
+ uint32_t ec_hsm_id;
+} __ABI_PACKED;
+
+/** EC status maximum number of descriptors */
+#define EC_ERR_STATUS_DESC_MAX_NUM 4
+
+struct cmd_ec_status_get_response {
+ /** @brief Target EC id (the same id received with request). */
+ uint32_t ec_hsm_id;
+ /**
+ * @brief Bitmask of @ref bpmp_ec_status_flags
+ *
+ * If NO_ERROR flag is set, error_ fields should be ignored
+ */
+ uint32_t ec_status_flags;
+ /** @brief Found EC error index. */
+ uint32_t error_idx;
+ /** @brief Found EC error type @ref bpmp_ec_err_type. */
+ uint32_t error_type;
+ /** @brief Number of returned EC error descriptors */
+ uint32_t error_desc_num;
+ /** @brief EC error descriptors */
+ union ec_err_desc error_descs[EC_ERR_STATUS_DESC_MAX_NUM];
+} __ABI_PACKED;
+
+/**
+ * @ingroup EC
+ * @brief Request with #MRQ_EC
+ *
+ * Used by the sender of an #MRQ_EC message to access ECs owned
+ * by BPMP.
+ *
+ * |sub-command |payload |
+ * |----------------------------|-----------------------|
+ * |@ref CMD_EC_STATUS_GET |ec_status_get |
*
- * For thermal sensor enumerations, see <mach-t186/thermal-t186.h>
*/
+struct mrq_ec_request {
+ /** @brief Sub-command id. */
+ uint32_t cmd_id;
+
+ union {
+ struct cmd_ec_status_get_request ec_status_get;
+ } __UNION_ANON;
+} __ABI_PACKED;
+
/**
- * @defgroup Error_Codes
+ * @ingroup EC
+ * @brief Response to MRQ_EC
+ *
+ * Each sub-command supported by @ref mrq_ec_request may return
+ * sub-command-specific data as indicated below.
+ *
+ * |sub-command |payload |
+ * |----------------------------|------------------------|
+ * |@ref CMD_EC_STATUS_GET |ec_status_get |
+ *
+ */
+
+struct mrq_ec_response {
+ union {
+ struct cmd_ec_status_get_response ec_status_get;
+ } __UNION_ANON;
+} __ABI_PACKED;
+
+/** @} */
+/** @endcond */
+
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_FBVOLT_STATUS
+ * @brief Provides status information about voltage state for fuse burning
+ *
+ * * Platforms: T194 onwards
+ * @cond bpmp_t194
+ * * Initiators: CCPLEX
+ * * Target: BPMP
+ * * Request Payload: None
+ * * Response Payload: @ref mrq_fbvolt_status_response
+ * @{
+ */
+
+/**
+ * @ingroup Fbvolt_status
+ * @brief Response to #MRQ_FBVOLT_STATUS
+ *
+ * Value of #ready reflects if core voltages are in a suitable state for buring
+ * fuses. A value of 0x1 indicates that core voltages are ready for burning
+ * fuses. A value of 0x0 indicates that core voltages are not ready.
+ */
+struct mrq_fbvolt_status_response {
+ /** @brief Bit [0:0] - ready status, bits [31:1] - reserved */
+ uint32_t ready;
+ /** @brief Reserved */
+ uint32_t unused;
+} __ABI_PACKED;
+
+/** @} */
+/** @endcond */
+
+/**
+ * @addtogroup Error_Codes
* Negative values for mrq_response::err generally indicate some
* error. The ABI defines the following error codes. Negating these
* defines is an exercise left to the user.
* @{
*/
+
/** @brief No such file or directory */
#define BPMP_ENOENT 2
/** @brief No MRQ handler */
@@ -1994,6 +2695,11 @@ union mrq_ringbuf_console_bpmp_to_host_response {
#define BPMP_ETIMEDOUT 23
/** @brief Out of range */
#define BPMP_ERANGE 34
+/** @brief Function not implemented */
+#define BPMP_ENOSYS 38
+/** @brief Invalid slot */
+#define BPMP_EBADSLT 57
+
/** @} */
-/** @} */
+
#endif