diff options
Diffstat (limited to 'include/uapi/linux/batadv_packet.h')
| -rw-r--r-- | include/uapi/linux/batadv_packet.h | 644 |
1 files changed, 644 insertions, 0 deletions
diff --git a/include/uapi/linux/batadv_packet.h b/include/uapi/linux/batadv_packet.h new file mode 100644 index 000000000000..5cb360be2a11 --- /dev/null +++ b/include/uapi/linux/batadv_packet.h @@ -0,0 +1,644 @@ +/* SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) */ +/* Copyright (C) 2007-2017 B.A.T.M.A.N. contributors: + * + * Marek Lindner, Simon Wunderlich + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public + * License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _UAPI_LINUX_BATADV_PACKET_H_ +#define _UAPI_LINUX_BATADV_PACKET_H_ + +#include <asm/byteorder.h> +#include <linux/if_ether.h> +#include <linux/types.h> + +/** + * batadv_tp_is_error() - Check throughput meter return code for error + * @n: throughput meter return code + * + * Return: 0 when not error was detected, != 0 otherwise + */ +#define batadv_tp_is_error(n) ((__u8)(n) > 127 ? 1 : 0) + +/** + * enum batadv_packettype - types for batman-adv encapsulated packets + * @BATADV_IV_OGM: originator messages for B.A.T.M.A.N. IV + * @BATADV_BCAST: broadcast packets carrying broadcast payload + * @BATADV_CODED: network coded packets + * @BATADV_ELP: echo location packets for B.A.T.M.A.N. V + * @BATADV_OGM2: originator messages for B.A.T.M.A.N. V + * + * @BATADV_UNICAST: unicast packets carrying unicast payload traffic + * @BATADV_UNICAST_FRAG: unicast packets carrying a fragment of the original + * payload packet + * @BATADV_UNICAST_4ADDR: unicast packet including the originator address of + * the sender + * @BATADV_ICMP: unicast packet like IP ICMP used for ping or traceroute + * @BATADV_UNICAST_TVLV: unicast packet carrying TVLV containers + */ +enum batadv_packettype { + /* 0x00 - 0x3f: local packets or special rules for handling */ + BATADV_IV_OGM = 0x00, + BATADV_BCAST = 0x01, + BATADV_CODED = 0x02, + BATADV_ELP = 0x03, + BATADV_OGM2 = 0x04, + /* 0x40 - 0x7f: unicast */ +#define BATADV_UNICAST_MIN 0x40 + BATADV_UNICAST = 0x40, + BATADV_UNICAST_FRAG = 0x41, + BATADV_UNICAST_4ADDR = 0x42, + BATADV_ICMP = 0x43, + BATADV_UNICAST_TVLV = 0x44, +#define BATADV_UNICAST_MAX 0x7f + /* 0x80 - 0xff: reserved */ +}; + +/** + * enum batadv_subtype - packet subtype for unicast4addr + * @BATADV_P_DATA: user payload + * @BATADV_P_DAT_DHT_GET: DHT request message + * @BATADV_P_DAT_DHT_PUT: DHT store message + * @BATADV_P_DAT_CACHE_REPLY: ARP reply generated by DAT + */ +enum batadv_subtype { + BATADV_P_DATA = 0x01, + BATADV_P_DAT_DHT_GET = 0x02, + BATADV_P_DAT_DHT_PUT = 0x03, + BATADV_P_DAT_CACHE_REPLY = 0x04, +}; + +/* this file is included by batctl which needs these defines */ +#define BATADV_COMPAT_VERSION 15 + +/** + * enum batadv_iv_flags - flags used in B.A.T.M.A.N. IV OGM packets + * @BATADV_NOT_BEST_NEXT_HOP: flag is set when ogm packet is forwarded and was + * previously received from someone else than the best neighbor. + * @BATADV_PRIMARIES_FIRST_HOP: flag unused. + * @BATADV_DIRECTLINK: flag is for the first hop or if rebroadcasted from a + * one hop neighbor on the interface where it was originally received. + */ +enum batadv_iv_flags { + BATADV_NOT_BEST_NEXT_HOP = 1UL << 0, + BATADV_PRIMARIES_FIRST_HOP = 1UL << 1, + BATADV_DIRECTLINK = 1UL << 2, +}; + +/** + * enum batadv_icmp_packettype - ICMP message types + * @BATADV_ECHO_REPLY: success reply to BATADV_ECHO_REQUEST + * @BATADV_DESTINATION_UNREACHABLE: failure when route to destination not found + * @BATADV_ECHO_REQUEST: request BATADV_ECHO_REPLY from destination + * @BATADV_TTL_EXCEEDED: error after BATADV_ECHO_REQUEST traversed too many hops + * @BATADV_PARAMETER_PROBLEM: return code for malformed messages + * @BATADV_TP: throughput meter packet + */ +enum batadv_icmp_packettype { + BATADV_ECHO_REPLY = 0, + BATADV_DESTINATION_UNREACHABLE = 3, + BATADV_ECHO_REQUEST = 8, + BATADV_TTL_EXCEEDED = 11, + BATADV_PARAMETER_PROBLEM = 12, + BATADV_TP = 15, +}; + +/** + * enum batadv_mcast_flags - flags for multicast capabilities and settings + * @BATADV_MCAST_WANT_ALL_UNSNOOPABLES: we want all packets destined for + * 224.0.0.0/24 or ff02::1 + * @BATADV_MCAST_WANT_ALL_IPV4: we want all IPv4 multicast packets + * @BATADV_MCAST_WANT_ALL_IPV6: we want all IPv6 multicast packets + */ +enum batadv_mcast_flags { + BATADV_MCAST_WANT_ALL_UNSNOOPABLES = 1UL << 0, + BATADV_MCAST_WANT_ALL_IPV4 = 1UL << 1, + BATADV_MCAST_WANT_ALL_IPV6 = 1UL << 2, +}; + +/* tt data subtypes */ +#define BATADV_TT_DATA_TYPE_MASK 0x0F + +/** + * enum batadv_tt_data_flags - flags for tt data tvlv + * @BATADV_TT_OGM_DIFF: TT diff propagated through OGM + * @BATADV_TT_REQUEST: TT request message + * @BATADV_TT_RESPONSE: TT response message + * @BATADV_TT_FULL_TABLE: contains full table to replace existing table + */ +enum batadv_tt_data_flags { + BATADV_TT_OGM_DIFF = 1UL << 0, + BATADV_TT_REQUEST = 1UL << 1, + BATADV_TT_RESPONSE = 1UL << 2, + BATADV_TT_FULL_TABLE = 1UL << 4, +}; + +/** + * enum batadv_vlan_flags - flags for the four MSB of any vlan ID field + * @BATADV_VLAN_HAS_TAG: whether the field contains a valid vlan tag or not + */ +enum batadv_vlan_flags { + BATADV_VLAN_HAS_TAG = 1UL << 15, +}; + +/** + * enum batadv_bla_claimframe - claim frame types for the bridge loop avoidance + * @BATADV_CLAIM_TYPE_CLAIM: claim of a client mac address + * @BATADV_CLAIM_TYPE_UNCLAIM: unclaim of a client mac address + * @BATADV_CLAIM_TYPE_ANNOUNCE: announcement of backbone with current crc + * @BATADV_CLAIM_TYPE_REQUEST: request of full claim table + * @BATADV_CLAIM_TYPE_LOOPDETECT: mesh-traversing loop detect packet + */ +enum batadv_bla_claimframe { + BATADV_CLAIM_TYPE_CLAIM = 0x00, + BATADV_CLAIM_TYPE_UNCLAIM = 0x01, + BATADV_CLAIM_TYPE_ANNOUNCE = 0x02, + BATADV_CLAIM_TYPE_REQUEST = 0x03, + BATADV_CLAIM_TYPE_LOOPDETECT = 0x04, +}; + +/** + * enum batadv_tvlv_type - tvlv type definitions + * @BATADV_TVLV_GW: gateway tvlv + * @BATADV_TVLV_DAT: distributed arp table tvlv + * @BATADV_TVLV_NC: network coding tvlv + * @BATADV_TVLV_TT: translation table tvlv + * @BATADV_TVLV_ROAM: roaming advertisement tvlv + * @BATADV_TVLV_MCAST: multicast capability tvlv + */ +enum batadv_tvlv_type { + BATADV_TVLV_GW = 0x01, + BATADV_TVLV_DAT = 0x02, + BATADV_TVLV_NC = 0x03, + BATADV_TVLV_TT = 0x04, + BATADV_TVLV_ROAM = 0x05, + BATADV_TVLV_MCAST = 0x06, +}; + +#pragma pack(2) +/* the destination hardware field in the ARP frame is used to + * transport the claim type and the group id + */ +struct batadv_bla_claim_dst { + __u8 magic[3]; /* FF:43:05 */ + __u8 type; /* bla_claimframe */ + __be16 group; /* group id */ +}; + +#pragma pack() + +/** + * struct batadv_ogm_packet - ogm (routing protocol) packet + * @packet_type: batman-adv packet type, part of the general header + * @version: batman-adv protocol version, part of the genereal header + * @ttl: time to live for this packet, part of the genereal header + * @flags: contains routing relevant flags - see enum batadv_iv_flags + * @seqno: sequence identification + * @orig: address of the source node + * @prev_sender: address of the previous sender + * @reserved: reserved byte for alignment + * @tq: transmission quality + * @tvlv_len: length of tvlv data following the ogm header + */ +struct batadv_ogm_packet { + __u8 packet_type; + __u8 version; + __u8 ttl; + __u8 flags; + __be32 seqno; + __u8 orig[ETH_ALEN]; + __u8 prev_sender[ETH_ALEN]; + __u8 reserved; + __u8 tq; + __be16 tvlv_len; + /* __packed is not needed as the struct size is divisible by 4, + * and the largest data type in this struct has a size of 4. + */ +}; + +#define BATADV_OGM_HLEN sizeof(struct batadv_ogm_packet) + +/** + * struct batadv_ogm2_packet - ogm2 (routing protocol) packet + * @packet_type: batman-adv packet type, part of the general header + * @version: batman-adv protocol version, part of the general header + * @ttl: time to live for this packet, part of the general header + * @flags: reseved for routing relevant flags - currently always 0 + * @seqno: sequence number + * @orig: originator mac address + * @tvlv_len: length of the appended tvlv buffer (in bytes) + * @throughput: the currently flooded path throughput + */ +struct batadv_ogm2_packet { + __u8 packet_type; + __u8 version; + __u8 ttl; + __u8 flags; + __be32 seqno; + __u8 orig[ETH_ALEN]; + __be16 tvlv_len; + __be32 throughput; + /* __packed is not needed as the struct size is divisible by 4, + * and the largest data type in this struct has a size of 4. + */ +}; + +#define BATADV_OGM2_HLEN sizeof(struct batadv_ogm2_packet) + +/** + * struct batadv_elp_packet - elp (neighbor discovery) packet + * @packet_type: batman-adv packet type, part of the general header + * @version: batman-adv protocol version, part of the genereal header + * @orig: originator mac address + * @seqno: sequence number + * @elp_interval: currently used ELP sending interval in ms + */ +struct batadv_elp_packet { + __u8 packet_type; + __u8 version; + __u8 orig[ETH_ALEN]; + __be32 seqno; + __be32 elp_interval; +}; + +#define BATADV_ELP_HLEN sizeof(struct batadv_elp_packet) + +/** + * struct batadv_icmp_header - common members among all the ICMP packets + * @packet_type: batman-adv packet type, part of the general header + * @version: batman-adv protocol version, part of the genereal header + * @ttl: time to live for this packet, part of the genereal header + * @msg_type: ICMP packet type + * @dst: address of the destination node + * @orig: address of the source node + * @uid: local ICMP socket identifier + * @align: not used - useful for alignment purposes only + * + * This structure is used for ICMP packets parsing only and it is never sent + * over the wire. The alignment field at the end is there to ensure that + * members are padded the same way as they are in real packets. + */ +struct batadv_icmp_header { + __u8 packet_type; + __u8 version; + __u8 ttl; + __u8 msg_type; /* see ICMP message types above */ + __u8 dst[ETH_ALEN]; + __u8 orig[ETH_ALEN]; + __u8 uid; + __u8 align[3]; +}; + +/** + * struct batadv_icmp_packet - ICMP packet + * @packet_type: batman-adv packet type, part of the general header + * @version: batman-adv protocol version, part of the genereal header + * @ttl: time to live for this packet, part of the genereal header + * @msg_type: ICMP packet type + * @dst: address of the destination node + * @orig: address of the source node + * @uid: local ICMP socket identifier + * @reserved: not used - useful for alignment + * @seqno: ICMP sequence number + */ +struct batadv_icmp_packet { + __u8 packet_type; + __u8 version; + __u8 ttl; + __u8 msg_type; /* see ICMP message types above */ + __u8 dst[ETH_ALEN]; + __u8 orig[ETH_ALEN]; + __u8 uid; + __u8 reserved; + __be16 seqno; +}; + +/** + * struct batadv_icmp_tp_packet - ICMP TP Meter packet + * @packet_type: batman-adv packet type, part of the general header + * @version: batman-adv protocol version, part of the genereal header + * @ttl: time to live for this packet, part of the genereal header + * @msg_type: ICMP packet type + * @dst: address of the destination node + * @orig: address of the source node + * @uid: local ICMP socket identifier + * @subtype: TP packet subtype (see batadv_icmp_tp_subtype) + * @session: TP session identifier + * @seqno: the TP sequence number + * @timestamp: time when the packet has been sent. This value is filled in a + * TP_MSG and echoed back in the next TP_ACK so that the sender can compute the + * RTT. Since it is read only by the host which wrote it, there is no need to + * store it using network order + */ +struct batadv_icmp_tp_packet { + __u8 packet_type; + __u8 version; + __u8 ttl; + __u8 msg_type; /* see ICMP message types above */ + __u8 dst[ETH_ALEN]; + __u8 orig[ETH_ALEN]; + __u8 uid; + __u8 subtype; + __u8 session[2]; + __be32 seqno; + __be32 timestamp; +}; + +/** + * enum batadv_icmp_tp_subtype - ICMP TP Meter packet subtypes + * @BATADV_TP_MSG: Msg from sender to receiver + * @BATADV_TP_ACK: acknowledgment from receiver to sender + */ +enum batadv_icmp_tp_subtype { + BATADV_TP_MSG = 0, + BATADV_TP_ACK, +}; + +#define BATADV_RR_LEN 16 + +/** + * struct batadv_icmp_packet_rr - ICMP RouteRecord packet + * @packet_type: batman-adv packet type, part of the general header + * @version: batman-adv protocol version, part of the genereal header + * @ttl: time to live for this packet, part of the genereal header + * @msg_type: ICMP packet type + * @dst: address of the destination node + * @orig: address of the source node + * @uid: local ICMP socket identifier + * @rr_cur: number of entries the rr array + * @seqno: ICMP sequence number + * @rr: route record array + */ +struct batadv_icmp_packet_rr { + __u8 packet_type; + __u8 version; + __u8 ttl; + __u8 msg_type; /* see ICMP message types above */ + __u8 dst[ETH_ALEN]; + __u8 orig[ETH_ALEN]; + __u8 uid; + __u8 rr_cur; + __be16 seqno; + __u8 rr[BATADV_RR_LEN][ETH_ALEN]; +}; + +#define BATADV_ICMP_MAX_PACKET_SIZE sizeof(struct batadv_icmp_packet_rr) + +/* All packet headers in front of an ethernet header have to be completely + * divisible by 2 but not by 4 to make the payload after the ethernet + * header again 4 bytes boundary aligned. + * + * A packing of 2 is necessary to avoid extra padding at the end of the struct + * caused by a structure member which is larger than two bytes. Otherwise + * the structure would not fulfill the previously mentioned rule to avoid the + * misalignment of the payload after the ethernet header. It may also lead to + * leakage of information when the padding it not initialized before sending. + */ +#pragma pack(2) + +/** + * struct batadv_unicast_packet - unicast packet for network payload + * @packet_type: batman-adv packet type, part of the general header + * @version: batman-adv protocol version, part of the genereal header + * @ttl: time to live for this packet, part of the genereal header + * @ttvn: translation table version number + * @dest: originator destination of the unicast packet + */ +struct batadv_unicast_packet { + __u8 packet_type; + __u8 version; + __u8 ttl; + __u8 ttvn; /* destination translation table version number */ + __u8 dest[ETH_ALEN]; + /* "4 bytes boundary + 2 bytes" long to make the payload after the + * following ethernet header again 4 bytes boundary aligned + */ +}; + +/** + * struct batadv_unicast_4addr_packet - extended unicast packet + * @u: common unicast packet header + * @src: address of the source + * @subtype: packet subtype + * @reserved: reserved byte for alignment + */ +struct batadv_unicast_4addr_packet { + struct batadv_unicast_packet u; + __u8 src[ETH_ALEN]; + __u8 subtype; + __u8 reserved; + /* "4 bytes boundary + 2 bytes" long to make the payload after the + * following ethernet header again 4 bytes boundary aligned + */ +}; + +/** + * struct batadv_frag_packet - fragmented packet + * @packet_type: batman-adv packet type, part of the general header + * @version: batman-adv protocol version, part of the genereal header + * @ttl: time to live for this packet, part of the genereal header + * @dest: final destination used when routing fragments + * @orig: originator of the fragment used when merging the packet + * @no: fragment number within this sequence + * @priority: priority of frame, from ToS IP precedence or 802.1p + * @reserved: reserved byte for alignment + * @seqno: sequence identification + * @total_size: size of the merged packet + */ +struct batadv_frag_packet { + __u8 packet_type; + __u8 version; /* batman version field */ + __u8 ttl; +#if defined(__BIG_ENDIAN_BITFIELD) + __u8 no:4; + __u8 priority:3; + __u8 reserved:1; +#elif defined(__LITTLE_ENDIAN_BITFIELD) + __u8 reserved:1; + __u8 priority:3; + __u8 no:4; +#else +#error "unknown bitfield endianness" +#endif + __u8 dest[ETH_ALEN]; + __u8 orig[ETH_ALEN]; + __be16 seqno; + __be16 total_size; +}; + +/** + * struct batadv_bcast_packet - broadcast packet for network payload + * @packet_type: batman-adv packet type, part of the general header + * @version: batman-adv protocol version, part of the genereal header + * @ttl: time to live for this packet, part of the genereal header + * @reserved: reserved byte for alignment + * @seqno: sequence identification + * @orig: originator of the broadcast packet + */ +struct batadv_bcast_packet { + __u8 packet_type; + __u8 version; /* batman version field */ + __u8 ttl; + __u8 reserved; + __be32 seqno; + __u8 orig[ETH_ALEN]; + /* "4 bytes boundary + 2 bytes" long to make the payload after the + * following ethernet header again 4 bytes boundary aligned + */ +}; + +/** + * struct batadv_coded_packet - network coded packet + * @packet_type: batman-adv packet type, part of the general header + * @version: batman-adv protocol version, part of the genereal header + * @ttl: time to live for this packet, part of the genereal header + * @first_source: original source of first included packet + * @first_orig_dest: original destinal of first included packet + * @first_crc: checksum of first included packet + * @first_ttvn: tt-version number of first included packet + * @second_ttl: ttl of second packet + * @second_dest: second receiver of this coded packet + * @second_source: original source of second included packet + * @second_orig_dest: original destination of second included packet + * @second_crc: checksum of second included packet + * @second_ttvn: tt version number of second included packet + * @coded_len: length of network coded part of the payload + */ +struct batadv_coded_packet { + __u8 packet_type; + __u8 version; /* batman version field */ + __u8 ttl; + __u8 first_ttvn; + /* __u8 first_dest[ETH_ALEN]; - saved in mac header destination */ + __u8 first_source[ETH_ALEN]; + __u8 first_orig_dest[ETH_ALEN]; + __be32 first_crc; + __u8 second_ttl; + __u8 second_ttvn; + __u8 second_dest[ETH_ALEN]; + __u8 second_source[ETH_ALEN]; + __u8 second_orig_dest[ETH_ALEN]; + __be32 second_crc; + __be16 coded_len; +}; + +#pragma pack() + +/** + * struct batadv_unicast_tvlv_packet - generic unicast packet with tvlv payload + * @packet_type: batman-adv packet type, part of the general header + * @version: batman-adv protocol version, part of the genereal header + * @ttl: time to live for this packet, part of the genereal header + * @reserved: reserved field (for packet alignment) + * @src: address of the source + * @dst: address of the destination + * @tvlv_len: length of tvlv data following the unicast tvlv header + * @align: 2 bytes to align the header to a 4 byte boundary + */ +struct batadv_unicast_tvlv_packet { + __u8 packet_type; + __u8 version; /* batman version field */ + __u8 ttl; + __u8 reserved; + __u8 dst[ETH_ALEN]; + __u8 src[ETH_ALEN]; + __be16 tvlv_len; + __u16 align; +}; + +/** + * struct batadv_tvlv_hdr - base tvlv header struct + * @type: tvlv container type (see batadv_tvlv_type) + * @version: tvlv container version + * @len: tvlv container length + */ +struct batadv_tvlv_hdr { + __u8 type; + __u8 version; + __be16 len; +}; + +/** + * struct batadv_tvlv_gateway_data - gateway data propagated through gw tvlv + * container + * @bandwidth_down: advertised uplink download bandwidth + * @bandwidth_up: advertised uplink upload bandwidth + */ +struct batadv_tvlv_gateway_data { + __be32 bandwidth_down; + __be32 bandwidth_up; +}; + +/** + * struct batadv_tvlv_tt_data - tt data propagated through the tt tvlv container + * @flags: translation table flags (see batadv_tt_data_flags) + * @ttvn: translation table version number + * @num_vlan: number of announced VLANs. In the TVLV this struct is followed by + * one batadv_tvlv_tt_vlan_data object per announced vlan + */ +struct batadv_tvlv_tt_data { + __u8 flags; + __u8 ttvn; + __be16 num_vlan; +}; + +/** + * struct batadv_tvlv_tt_vlan_data - vlan specific tt data propagated through + * the tt tvlv container + * @crc: crc32 checksum of the entries belonging to this vlan + * @vid: vlan identifier + * @reserved: unused, useful for alignment purposes + */ +struct batadv_tvlv_tt_vlan_data { + __be32 crc; + __be16 vid; + __u16 reserved; +}; + +/** + * struct batadv_tvlv_tt_change - translation table diff data + * @flags: status indicators concerning the non-mesh client (see + * batadv_tt_client_flags) + * @reserved: reserved field - useful for alignment purposes only + * @addr: mac address of non-mesh client that triggered this tt change + * @vid: VLAN identifier + */ +struct batadv_tvlv_tt_change { + __u8 flags; + __u8 reserved[3]; + __u8 addr[ETH_ALEN]; + __be16 vid; +}; + +/** + * struct batadv_tvlv_roam_adv - roaming advertisement + * @client: mac address of roaming client + * @vid: VLAN identifier + */ +struct batadv_tvlv_roam_adv { + __u8 client[ETH_ALEN]; + __be16 vid; +}; + +/** + * struct batadv_tvlv_mcast_data - payload of a multicast tvlv + * @flags: multicast flags announced by the orig node + * @reserved: reserved field + */ +struct batadv_tvlv_mcast_data { + __u8 flags; + __u8 reserved[3]; +}; + +#endif /* _UAPI_LINUX_BATADV_PACKET_H_ */ |