diff options
Diffstat (limited to 'include/uapi/linux/bpf.h')
| -rw-r--r-- | include/uapi/linux/bpf.h | 80 |
1 files changed, 73 insertions, 7 deletions
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 29a5bc3d5c66..5695ab53e354 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -170,6 +170,7 @@ enum bpf_prog_type { BPF_PROG_TYPE_FLOW_DISSECTOR, BPF_PROG_TYPE_CGROUP_SYSCTL, BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE, + BPF_PROG_TYPE_CGROUP_SOCKOPT, }; enum bpf_attach_type { @@ -194,6 +195,8 @@ enum bpf_attach_type { BPF_CGROUP_SYSCTL, BPF_CGROUP_UDP4_RECVMSG, BPF_CGROUP_UDP6_RECVMSG, + BPF_CGROUP_GETSOCKOPT, + BPF_CGROUP_SETSOCKOPT, __MAX_BPF_ATTACH_TYPE }; @@ -262,6 +265,24 @@ enum bpf_attach_type { */ #define BPF_F_ANY_ALIGNMENT (1U << 1) +/* BPF_F_TEST_RND_HI32 is used in BPF_PROG_LOAD command for testing purpose. + * Verifier does sub-register def/use analysis and identifies instructions whose + * def only matters for low 32-bit, high 32-bit is never referenced later + * through implicit zero extension. Therefore verifier notifies JIT back-ends + * that it is safe to ignore clearing high 32-bit for these instructions. This + * saves some back-ends a lot of code-gen. However such optimization is not + * necessary on some arches, for example x86_64, arm64 etc, whose JIT back-ends + * hence hasn't used verifier's analysis result. But, we really want to have a + * way to be able to verify the correctness of the described optimization on + * x86_64 on which testsuites are frequently exercised. + * + * So, this flag is introduced. Once it is set, verifier will randomize high + * 32-bit for those instructions who has been identified as safe to ignore them. + * Then, if verifier is not doing correct analysis, such randomization will + * regress tests to expose bugs. + */ +#define BPF_F_TEST_RND_HI32 (1U << 2) + /* When BPF ldimm64's insn[0].src_reg != 0 then this can have * two extensions: * @@ -1550,8 +1571,11 @@ union bpf_attr { * but this is only implemented for native XDP (with driver * support) as of this writing). * - * All values for *flags* are reserved for future usage, and must - * be left at zero. + * The lower two bits of *flags* are used as the return code if + * the map lookup fails. This is so that the return value can be + * one of the XDP program return codes up to XDP_TX, as chosen by + * the caller. Any higher bits in the *flags* argument must be + * unset. * * When used to redirect packets to net devices, this helper * provides a high performance increase over **bpf_redirect**\ (). @@ -1746,6 +1770,7 @@ union bpf_attr { * * **BPF_SOCK_OPS_RTO_CB_FLAG** (retransmission time out) * * **BPF_SOCK_OPS_RETRANS_CB_FLAG** (retransmission) * * **BPF_SOCK_OPS_STATE_CB_FLAG** (TCP state change) + * * **BPF_SOCK_OPS_RTT_CB_FLAG** (every RTT) * * Therefore, this function can be used to clear a callback flag by * setting the appropriate bit to zero. e.g. to disable the RTO @@ -2674,6 +2699,20 @@ union bpf_attr { * 0 on success. * * **-ENOENT** if the bpf-local-storage cannot be found. + * + * int bpf_send_signal(u32 sig) + * Description + * Send signal *sig* to the current task. + * Return + * 0 on success or successfully queued. + * + * **-EBUSY** if work queue under nmi is full. + * + * **-EINVAL** if *sig* is invalid. + * + * **-EPERM** if no permission to send the *sig*. + * + * **-EAGAIN** if bpf program can try again. */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -2784,7 +2823,8 @@ union bpf_attr { FN(strtol), \ FN(strtoul), \ FN(sk_storage_get), \ - FN(sk_storage_delete), + FN(sk_storage_delete), \ + FN(send_signal), /* integer value in 'imm' field of BPF_CALL instruction selects which helper * function eBPF program intends to call @@ -3033,6 +3073,12 @@ struct bpf_tcp_sock { * sum(delta(snd_una)), or how many bytes * were acked. */ + __u32 dsack_dups; /* RFC4898 tcpEStatsStackDSACKDups + * total number of DSACK blocks received + */ + __u32 delivered; /* Total data packets delivered incl. rexmits */ + __u32 delivered_ce; /* Like the above but only ECE marked packets */ + __u32 icsk_retransmits; /* Number of unrecovered [RTO] timeouts */ }; struct bpf_sock_tuple { @@ -3052,6 +3098,10 @@ struct bpf_sock_tuple { }; }; +struct bpf_xdp_sock { + __u32 queue_id; +}; + #define XDP_PACKET_HEADROOM 256 /* User return codes for XDP prog type. @@ -3198,7 +3248,7 @@ struct bpf_sock_addr { __u32 user_ip4; /* Allows 1,2,4-byte read and 4-byte write. * Stored in network byte order. */ - __u32 user_ip6[4]; /* Allows 1,2,4-byte read an 4-byte write. + __u32 user_ip6[4]; /* Allows 1,2,4-byte read and 4,8-byte write. * Stored in network byte order. */ __u32 user_port; /* Allows 4-byte read and write. @@ -3207,12 +3257,13 @@ struct bpf_sock_addr { __u32 family; /* Allows 4-byte read, but no write */ __u32 type; /* Allows 4-byte read, but no write */ __u32 protocol; /* Allows 4-byte read, but no write */ - __u32 msg_src_ip4; /* Allows 1,2,4-byte read an 4-byte write. + __u32 msg_src_ip4; /* Allows 1,2,4-byte read and 4-byte write. * Stored in network byte order. */ - __u32 msg_src_ip6[4]; /* Allows 1,2,4-byte read an 4-byte write. + __u32 msg_src_ip6[4]; /* Allows 1,2,4-byte read and 4,8-byte write. * Stored in network byte order. */ + __bpf_md_ptr(struct bpf_sock *, sk); }; /* User bpf_sock_ops struct to access socket values and specify request ops @@ -3264,13 +3315,15 @@ struct bpf_sock_ops { __u32 sk_txhash; __u64 bytes_received; __u64 bytes_acked; + __bpf_md_ptr(struct bpf_sock *, sk); }; /* Definitions for bpf_sock_ops_cb_flags */ #define BPF_SOCK_OPS_RTO_CB_FLAG (1<<0) #define BPF_SOCK_OPS_RETRANS_CB_FLAG (1<<1) #define BPF_SOCK_OPS_STATE_CB_FLAG (1<<2) -#define BPF_SOCK_OPS_ALL_CB_FLAGS 0x7 /* Mask of all currently +#define BPF_SOCK_OPS_RTT_CB_FLAG (1<<3) +#define BPF_SOCK_OPS_ALL_CB_FLAGS 0xF /* Mask of all currently * supported cb flags */ @@ -3325,6 +3378,8 @@ enum { BPF_SOCK_OPS_TCP_LISTEN_CB, /* Called on listen(2), right after * socket transition to LISTEN state. */ + BPF_SOCK_OPS_RTT_CB, /* Called on every RTT. + */ }; /* List of TCP states. There is a build check in net/ipv4/tcp.c to detect @@ -3503,4 +3558,15 @@ struct bpf_sysctl { */ }; +struct bpf_sockopt { + __bpf_md_ptr(struct bpf_sock *, sk); + __bpf_md_ptr(void *, optval); + __bpf_md_ptr(void *, optval_end); + + __s32 level; + __s32 optname; + __s32 optlen; + __s32 retval; +}; + #endif /* _UAPI__LINUX_BPF_H__ */ |