summaryrefslogtreecommitdiff
path: root/include/uapi/linux/fsi.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/uapi/linux/fsi.h')
-rw-r--r--include/uapi/linux/fsi.h58
1 files changed, 58 insertions, 0 deletions
diff --git a/include/uapi/linux/fsi.h b/include/uapi/linux/fsi.h
new file mode 100644
index 000000000000..da577ecd90e7
--- /dev/null
+++ b/include/uapi/linux/fsi.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+#ifndef _UAPI_LINUX_FSI_H
+#define _UAPI_LINUX_FSI_H
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+/*
+ * /dev/scom "raw" ioctl interface
+ *
+ * The driver supports a high level "read/write" interface which
+ * handles retries and converts the status to Linux error codes,
+ * however low level tools an debugger need to access the "raw"
+ * HW status information and interpret it themselves, so this
+ * ioctl interface is also provided for their use case.
+ */
+
+/* Structure for SCOM read/write */
+struct scom_access {
+ __u64 addr; /* SCOM address, supports indirect */
+ __u64 data; /* SCOM data (in for write, out for read) */
+ __u64 mask; /* Data mask for writes */
+ __u32 intf_errors; /* Interface error flags */
+#define SCOM_INTF_ERR_PARITY 0x00000001 /* Parity error */
+#define SCOM_INTF_ERR_PROTECTION 0x00000002 /* Blocked by secure boot */
+#define SCOM_INTF_ERR_ABORT 0x00000004 /* PIB reset during access */
+#define SCOM_INTF_ERR_UNKNOWN 0x80000000 /* Unknown error */
+ /*
+ * Note: Any other bit set in intf_errors need to be considered as an
+ * error. Future implementations may define new error conditions. The
+ * pib_status below is only valid if intf_errors is 0.
+ */
+ __u8 pib_status; /* 3-bit PIB status */
+#define SCOM_PIB_SUCCESS 0 /* Access successful */
+#define SCOM_PIB_BLOCKED 1 /* PIB blocked, pls retry */
+#define SCOM_PIB_OFFLINE 2 /* Chiplet offline */
+#define SCOM_PIB_PARTIAL 3 /* Partial good */
+#define SCOM_PIB_BAD_ADDR 4 /* Invalid address */
+#define SCOM_PIB_CLK_ERR 5 /* Clock error */
+#define SCOM_PIB_PARITY_ERR 6 /* Parity error on the PIB bus */
+#define SCOM_PIB_TIMEOUT 7 /* Bus timeout */
+ __u8 pad;
+};
+
+/* Flags for SCOM check */
+#define SCOM_CHECK_SUPPORTED 0x00000001 /* Interface supported */
+#define SCOM_CHECK_PROTECTED 0x00000002 /* Interface blocked by secure boot */
+
+/* Flags for SCOM reset */
+#define SCOM_RESET_INTF 0x00000001 /* Reset interface */
+#define SCOM_RESET_PIB 0x00000002 /* Reset PIB */
+
+#define FSI_SCOM_CHECK _IOR('s', 0x00, __u32)
+#define FSI_SCOM_READ _IOWR('s', 0x01, struct scom_access)
+#define FSI_SCOM_WRITE _IOWR('s', 0x02, struct scom_access)
+#define FSI_SCOM_RESET _IOW('s', 0x03, __u32)
+
+#endif /* _UAPI_LINUX_FSI_H */