summaryrefslogtreecommitdiff
path: root/include/uapi/linux/nl80211.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/uapi/linux/nl80211.h')
-rw-r--r--include/uapi/linux/nl80211.h82
1 files changed, 65 insertions, 17 deletions
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 51626b4175c0..f882fe1f9709 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -569,13 +569,14 @@
* authentication/association or not receiving a response from the AP.
* Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as
* well to remain backwards compatible.
- * @NL80211_CMD_ROAM: notifcation indicating the card/driver roamed by itself.
- * When the driver roamed in a network that requires 802.1X authentication,
- * %NL80211_ATTR_PORT_AUTHORIZED should be set if the 802.1X authentication
- * was done by the driver or if roaming was done using Fast Transition
- * protocol (in which case 802.1X authentication is not needed). If
- * %NL80211_ATTR_PORT_AUTHORIZED is not set, user space is responsible for
- * the 802.1X authentication.
+ * When establishing a security association, drivers that support 4 way
+ * handshake offload should send %NL80211_CMD_PORT_AUTHORIZED event when
+ * the 4 way handshake is completed successfully.
+ * @NL80211_CMD_ROAM: Notification indicating the card/driver roamed by itself.
+ * When a security association was established with the new AP (e.g. if
+ * the FT protocol was used for roaming or the driver completed the 4 way
+ * handshake), this event should be followed by an
+ * %NL80211_CMD_PORT_AUTHORIZED event.
* @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
* userspace that a connection was dropped by the AP or due to other
* reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
@@ -982,6 +983,14 @@
* @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously
* configured PMK for the authenticator address identified by
* &NL80211_ATTR_MAC.
+ * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates that the 4 way
+ * handshake was completed successfully by the driver. The BSSID is
+ * specified with &NL80211_ATTR_MAC. Drivers that support 4 way handshake
+ * offload should send this event after indicating 802.11 association with
+ * &NL80211_CMD_CONNECT or &NL80211_CMD_ROAM. If the 4 way handshake failed
+ * &NL80211_CMD_DISCONNECT should be indicated instead.
+ *
+ * @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded.
*
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
@@ -1185,6 +1194,10 @@ enum nl80211_commands {
NL80211_CMD_SET_PMK,
NL80211_CMD_DEL_PMK,
+ NL80211_CMD_PORT_AUTHORIZED,
+
+ NL80211_CMD_RELOAD_REGDB,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -1407,8 +1420,12 @@ enum nl80211_commands {
*
* @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is
* used for the association (&enum nl80211_mfp, represented as a u32);
- * this attribute can be used
- * with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests
+ * this attribute can be used with %NL80211_CMD_ASSOCIATE and
+ * %NL80211_CMD_CONNECT requests. %NL80211_MFP_OPTIONAL is not allowed for
+ * %NL80211_CMD_ASSOCIATE since user space SME is expected and hence, it
+ * must have decided whether to use management frame protection or not.
+ * Setting %NL80211_MFP_OPTIONAL with a %NL80211_CMD_CONNECT request will
+ * let the driver (or the firmware) decide whether to use MFP or not.
*
* @NL80211_ATTR_STA_FLAGS2: Attribute containing a
* &struct nl80211_sta_flag_update.
@@ -2134,10 +2151,7 @@ enum nl80211_commands {
* in %NL80211_CMD_CONNECT to indicate that for 802.1X authentication it
* wants to use the supported offload of the 4-way handshake.
* @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT.
- * @NL80211_ATTR_PORT_AUTHORIZED: flag attribute used in %NL80211_CMD_ROAMED
- * notification indicating that that 802.1X authentication was done by
- * the driver or is not needed (because roaming used the Fast Transition
- * protocol).
+ * @NL80211_ATTR_PORT_AUTHORIZED: (reserved)
*
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
@@ -3947,10 +3961,12 @@ enum nl80211_key_type {
* enum nl80211_mfp - Management frame protection state
* @NL80211_MFP_NO: Management frame protection not used
* @NL80211_MFP_REQUIRED: Management frame protection required
+ * @NL80211_MFP_OPTIONAL: Management frame protection is optional
*/
enum nl80211_mfp {
NL80211_MFP_NO,
NL80211_MFP_REQUIRED,
+ NL80211_MFP_OPTIONAL,
};
enum nl80211_wpa_versions {
@@ -4914,6 +4930,17 @@ enum nl80211_feature_flags {
* handshake with 802.1X in station mode (will pass EAP frames to the host
* and accept the set_pmk/del_pmk commands), doing it in the host might not
* be supported.
+ * @NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME: Driver is capable of overriding
+ * the max channel attribute in the FILS request params IE with the
+ * actual dwell time.
+ * @NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP: Driver accepts broadcast probe
+ * response
+ * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE: Driver supports sending
+ * the first probe request in each channel at rate of at least 5.5Mbps.
+ * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: Driver supports
+ * probe request tx deferral and suppression
+ * @NL80211_EXT_FEATURE_MFP_OPTIONAL: Driver supports the %NL80211_MFP_OPTIONAL
+ * value in %NL80211_ATTR_USE_MFP.
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -4936,6 +4963,11 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_FILS_SK_OFFLOAD,
NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK,
NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X,
+ NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME,
+ NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP,
+ NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE,
+ NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION,
+ NL80211_EXT_FEATURE_MFP_OPTIONAL,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
@@ -5012,12 +5044,28 @@ enum nl80211_timeout_reason {
* locally administered 1, multicast 0) is assumed.
* This flag must not be requested when the feature isn't supported, check
* the nl80211 feature flags for the device.
+ * @NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME: fill the dwell time in the FILS
+ * request parameters IE in the probe request
+ * @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses
+ * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at
+ * rate of at least 5.5M. In case non OCE AP is dicovered in the channel,
+ * only the first probe req in the channel will be sent in high rate.
+ * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request
+ * tx deferral (dot11FILSProbeDelay shall be set to 15ms)
+ * and suppression (if it has received a broadcast Probe Response frame,
+ * Beacon frame or FILS Discovery frame from an AP that the STA considers
+ * a suitable candidate for (re-)association - suitable in terms of
+ * SSID and/or RSSI
*/
enum nl80211_scan_flags {
- NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0,
- NL80211_SCAN_FLAG_FLUSH = 1<<1,
- NL80211_SCAN_FLAG_AP = 1<<2,
- NL80211_SCAN_FLAG_RANDOM_ADDR = 1<<3,
+ NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0,
+ NL80211_SCAN_FLAG_FLUSH = 1<<1,
+ NL80211_SCAN_FLAG_AP = 1<<2,
+ NL80211_SCAN_FLAG_RANDOM_ADDR = 1<<3,
+ NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME = 1<<4,
+ NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP = 1<<5,
+ NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE = 1<<6,
+ NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION = 1<<7,
};
/**