diff options
Diffstat (limited to 'include/uapi/linux')
-rw-r--r-- | include/uapi/linux/bpf.h | 145 | ||||
-rw-r--r-- | include/uapi/linux/fs.h | 3 | ||||
-rw-r--r-- | include/uapi/linux/fuse.h | 22 | ||||
-rw-r--r-- | include/uapi/linux/input-event-codes.h | 1 | ||||
-rw-r--r-- | include/uapi/linux/kfd_ioctl.h | 12 | ||||
-rw-r--r-- | include/uapi/linux/lirc.h | 2 | ||||
-rw-r--r-- | include/uapi/linux/media-bus-format.h | 3 | ||||
-rw-r--r-- | include/uapi/linux/media.h | 25 | ||||
-rw-r--r-- | include/uapi/linux/netfilter/nf_tables.h | 4 | ||||
-rw-r--r-- | include/uapi/linux/nfs_mount.h | 9 | ||||
-rw-r--r-- | include/uapi/linux/nfsd/cld.h | 1 | ||||
-rw-r--r-- | include/uapi/linux/pci_regs.h | 138 | ||||
-rw-r--r-- | include/uapi/linux/serial_core.h | 6 | ||||
-rw-r--r-- | include/uapi/linux/switchtec_ioctl.h | 13 | ||||
-rw-r--r-- | include/uapi/linux/v4l2-controls.h | 8 | ||||
-rw-r--r-- | include/uapi/linux/videodev2.h | 17 | ||||
-rw-r--r-- | include/uapi/linux/virtio_gpu.h | 12 |
17 files changed, 255 insertions, 166 deletions
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 72336bac7573..63e0cf66f01a 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -629,7 +629,7 @@ union bpf_attr { * **BPF_F_INVALIDATE_HASH** (set *skb*\ **->hash**, *skb*\ * **->swhash** and *skb*\ **->l4hash** to 0). * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -654,7 +654,7 @@ union bpf_attr { * flexibility and can handle sizes larger than 2 or 4 for the * checksum to update. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -686,7 +686,7 @@ union bpf_attr { * flexibility and can handle sizes larger than 2 or 4 for the * checksum to update. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -741,7 +741,7 @@ union bpf_attr { * efficient, but it is handled through an action code where the * redirection happens only after the eBPF program has returned. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -806,7 +806,7 @@ union bpf_attr { * **ETH_P_8021Q** and **ETH_P_8021AD**, it is considered to * be **ETH_P_8021Q**. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -818,7 +818,7 @@ union bpf_attr { * Description * Pop a VLAN header from the packet associated to *skb*. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1168,7 +1168,7 @@ union bpf_attr { * All values for *flags* are reserved for future usage, and must * be left at zero. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1281,7 +1281,7 @@ union bpf_attr { * implicitly linearizes, unclones and drops offloads from the * *skb*. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1317,7 +1317,7 @@ union bpf_attr { * **bpf_skb_pull_data()** to effectively unclone the *skb* from * the very beginning in case it is indeed cloned. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1369,7 +1369,7 @@ union bpf_attr { * All values for *flags* are reserved for future usage, and must * be left at zero. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1384,7 +1384,7 @@ union bpf_attr { * can be used to prepare the packet for pushing or popping * headers. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1518,20 +1518,20 @@ union bpf_attr { * * **BPF_F_ADJ_ROOM_FIXED_GSO**: Do not adjust gso_size. * Adjusting mss in this way is not allowed for datagrams. * - * * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV4 **: - * * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV6 **: + * * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV4**, + * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV6**: * Any new space is reserved to hold a tunnel header. * Configure skb offsets and other fields accordingly. * - * * **BPF_F_ADJ_ROOM_ENCAP_L4_GRE **: - * * **BPF_F_ADJ_ROOM_ENCAP_L4_UDP **: + * * **BPF_F_ADJ_ROOM_ENCAP_L4_GRE**, + * **BPF_F_ADJ_ROOM_ENCAP_L4_UDP**: * Use with ENCAP_L3 flags to further specify the tunnel type. * - * * **BPF_F_ADJ_ROOM_ENCAP_L2(len) **: + * * **BPF_F_ADJ_ROOM_ENCAP_L2**\ (*len*): * Use with ENCAP_L3/L4 flags to further specify the tunnel - * type; **len** is the length of the inner MAC header. + * type; *len* is the length of the inner MAC header. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1610,7 +1610,7 @@ union bpf_attr { * more flexibility as the user is free to store whatever meta * data they need. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1852,7 +1852,7 @@ union bpf_attr { * copied if necessary (i.e. if data was not linear and if start * and end pointers do not point to the same chunk). * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -1886,7 +1886,7 @@ union bpf_attr { * only possible to shrink the packet as of this writing, * therefore *delta* must be a negative integer. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -2061,18 +2061,18 @@ union bpf_attr { * **BPF_LWT_ENCAP_IP** * IP encapsulation (GRE/GUE/IPIP/etc). The outer header * must be IPv4 or IPv6, followed by zero or more - * additional headers, up to LWT_BPF_MAX_HEADROOM total - * bytes in all prepended headers. Please note that - * if skb_is_gso(skb) is true, no more than two headers - * can be prepended, and the inner header, if present, - * should be either GRE or UDP/GUE. - * - * BPF_LWT_ENCAP_SEG6*** types can be called by bpf programs of - * type BPF_PROG_TYPE_LWT_IN; BPF_LWT_ENCAP_IP type can be called - * by bpf programs of types BPF_PROG_TYPE_LWT_IN and - * BPF_PROG_TYPE_LWT_XMIT. - * - * A call to this helper is susceptible to change the underlaying + * additional headers, up to **LWT_BPF_MAX_HEADROOM** + * total bytes in all prepended headers. Please note that + * if **skb_is_gso**\ (*skb*) is true, no more than two + * headers can be prepended, and the inner header, if + * present, should be either GRE or UDP/GUE. + * + * **BPF_LWT_ENCAP_SEG6**\ \* types can be called by BPF programs + * of type **BPF_PROG_TYPE_LWT_IN**; **BPF_LWT_ENCAP_IP** type can + * be called by bpf programs of types **BPF_PROG_TYPE_LWT_IN** and + * **BPF_PROG_TYPE_LWT_XMIT**. + * + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -2087,7 +2087,7 @@ union bpf_attr { * inside the outermost IPv6 Segment Routing Header can be * modified through this helper. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -2103,7 +2103,7 @@ union bpf_attr { * after the segments are accepted. *delta* can be as well * positive (growing) as negative (shrinking). * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -2126,13 +2126,13 @@ union bpf_attr { * Type of *param*: **int**. * **SEG6_LOCAL_ACTION_END_B6** * End.B6 action: Endpoint bound to an SRv6 policy. - * Type of param: **struct ipv6_sr_hdr**. + * Type of *param*: **struct ipv6_sr_hdr**. * **SEG6_LOCAL_ACTION_END_B6_ENCAP** * End.B6.Encap action: Endpoint bound to an SRv6 * encapsulation policy. - * Type of param: **struct ipv6_sr_hdr**. + * Type of *param*: **struct ipv6_sr_hdr**. * - * A call to this helper is susceptible to change the underlaying + * A call to this helper is susceptible to change the underlying * packet buffer. Therefore, at load time, all checks on pointers * previously done by the verifier are invalidated and must be * performed again, if the helper is used in combination with @@ -2285,7 +2285,8 @@ union bpf_attr { * Return * Pointer to **struct bpf_sock**, or **NULL** in case of failure. * For sockets with reuseport option, the **struct bpf_sock** - * result is from **reuse->socks**\ [] using the hash of the tuple. + * result is from *reuse*\ **->socks**\ [] using the hash of the + * tuple. * * struct bpf_sock *bpf_sk_lookup_udp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) * Description @@ -2321,7 +2322,8 @@ union bpf_attr { * Return * Pointer to **struct bpf_sock**, or **NULL** in case of failure. * For sockets with reuseport option, the **struct bpf_sock** - * result is from **reuse->socks**\ [] using the hash of the tuple. + * result is from *reuse*\ **->socks**\ [] using the hash of the + * tuple. * * int bpf_sk_release(struct bpf_sock *sock) * Description @@ -2490,31 +2492,34 @@ union bpf_attr { * network namespace *netns*. The return value must be checked, * and if non-**NULL**, released via **bpf_sk_release**\ (). * - * This function is identical to bpf_sk_lookup_tcp, except that it - * also returns timewait or request sockets. Use bpf_sk_fullsock - * or bpf_tcp_socket to access the full structure. + * This function is identical to **bpf_sk_lookup_tcp**\ (), except + * that it also returns timewait or request sockets. Use + * **bpf_sk_fullsock**\ () or **bpf_tcp_sock**\ () to access the + * full structure. * * This helper is available only if the kernel was compiled with * **CONFIG_NET** configuration option. * Return * Pointer to **struct bpf_sock**, or **NULL** in case of failure. * For sockets with reuseport option, the **struct bpf_sock** - * result is from **reuse->socks**\ [] using the hash of the tuple. + * result is from *reuse*\ **->socks**\ [] using the hash of the + * tuple. * * int bpf_tcp_check_syncookie(struct bpf_sock *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len) * Description - * Check whether iph and th contain a valid SYN cookie ACK for - * the listening socket in sk. + * Check whether *iph* and *th* contain a valid SYN cookie ACK for + * the listening socket in *sk*. * - * iph points to the start of the IPv4 or IPv6 header, while - * iph_len contains sizeof(struct iphdr) or sizeof(struct ip6hdr). + * *iph* points to the start of the IPv4 or IPv6 header, while + * *iph_len* contains **sizeof**\ (**struct iphdr**) or + * **sizeof**\ (**struct ip6hdr**). * - * th points to the start of the TCP header, while th_len contains - * sizeof(struct tcphdr). + * *th* points to the start of the TCP header, while *th_len* + * contains **sizeof**\ (**struct tcphdr**). * * Return - * 0 if iph and th are a valid SYN cookie ACK, or a negative error - * otherwise. + * 0 if *iph* and *th* are a valid SYN cookie ACK, or a negative + * error otherwise. * * int bpf_sysctl_get_name(struct bpf_sysctl *ctx, char *buf, size_t buf_len, u64 flags) * Description @@ -2592,17 +2597,17 @@ union bpf_attr { * and save the result in *res*. * * The string may begin with an arbitrary amount of white space - * (as determined by isspace(3)) followed by a single optional '-' - * sign. + * (as determined by **isspace**\ (3)) followed by a single + * optional '**-**' sign. * * Five least significant bits of *flags* encode base, other bits * are currently unused. * * Base must be either 8, 10, 16 or 0 to detect it automatically - * similar to user space strtol(3). + * similar to user space **strtol**\ (3). * Return * Number of characters consumed on success. Must be positive but - * no more than buf_len. + * no more than *buf_len*. * * **-EINVAL** if no valid digits were found or unsupported base * was provided. @@ -2616,16 +2621,16 @@ union bpf_attr { * given base and save the result in *res*. * * The string may begin with an arbitrary amount of white space - * (as determined by isspace(3)). + * (as determined by **isspace**\ (3)). * * Five least significant bits of *flags* encode base, other bits * are currently unused. * * Base must be either 8, 10, 16 or 0 to detect it automatically - * similar to user space strtoul(3). + * similar to user space **strtoul**\ (3). * Return * Number of characters consumed on success. Must be positive but - * no more than buf_len. + * no more than *buf_len*. * * **-EINVAL** if no valid digits were found or unsupported base * was provided. @@ -2634,26 +2639,26 @@ union bpf_attr { * * void *bpf_sk_storage_get(struct bpf_map *map, struct bpf_sock *sk, void *value, u64 flags) * Description - * Get a bpf-local-storage from a sk. + * Get a bpf-local-storage from a *sk*. * * Logically, it could be thought of getting the value from * a *map* with *sk* as the **key**. From this * perspective, the usage is not much different from - * **bpf_map_lookup_elem(map, &sk)** except this - * helper enforces the key must be a **bpf_fullsock()** - * and the map must be a BPF_MAP_TYPE_SK_STORAGE also. + * **bpf_map_lookup_elem**\ (*map*, **&**\ *sk*) except this + * helper enforces the key must be a full socket and the map must + * be a **BPF_MAP_TYPE_SK_STORAGE** also. * * Underneath, the value is stored locally at *sk* instead of - * the map. The *map* is used as the bpf-local-storage **type**. - * The bpf-local-storage **type** (i.e. the *map*) is searched - * against all bpf-local-storages residing at sk. + * the *map*. The *map* is used as the bpf-local-storage + * "type". The bpf-local-storage "type" (i.e. the *map*) is + * searched against all bpf-local-storages residing at *sk*. * - * An optional *flags* (BPF_SK_STORAGE_GET_F_CREATE) can be + * An optional *flags* (**BPF_SK_STORAGE_GET_F_CREATE**) can be * used such that a new bpf-local-storage will be * created if one does not exist. *value* can be used - * together with BPF_SK_STORAGE_GET_F_CREATE to specify + * together with **BPF_SK_STORAGE_GET_F_CREATE** to specify * the initial value of a bpf-local-storage. If *value* is - * NULL, the new bpf-local-storage will be zero initialized. + * **NULL**, the new bpf-local-storage will be zero initialized. * Return * A bpf-local-storage pointer is returned on success. * @@ -2662,7 +2667,7 @@ union bpf_attr { * * int bpf_sk_storage_delete(struct bpf_map *map, struct bpf_sock *sk) * Description - * Delete a bpf-local-storage from a sk. + * Delete a bpf-local-storage from a *sk*. * Return * 0 on success. * diff --git a/include/uapi/linux/fs.h b/include/uapi/linux/fs.h index 121e82ce296b..59c71fa8c553 100644 --- a/include/uapi/linux/fs.h +++ b/include/uapi/linux/fs.h @@ -320,6 +320,9 @@ struct fscrypt_key { #define SYNC_FILE_RANGE_WAIT_BEFORE 1 #define SYNC_FILE_RANGE_WRITE 2 #define SYNC_FILE_RANGE_WAIT_AFTER 4 +#define SYNC_FILE_RANGE_WRITE_AND_WAIT (SYNC_FILE_RANGE_WRITE | \ + SYNC_FILE_RANGE_WAIT_BEFORE | \ + SYNC_FILE_RANGE_WAIT_AFTER) /* * Flags for preadv2/pwritev2: diff --git a/include/uapi/linux/fuse.h b/include/uapi/linux/fuse.h index 2ac598614a8f..19fb55e3c73e 100644 --- a/include/uapi/linux/fuse.h +++ b/include/uapi/linux/fuse.h @@ -44,6 +44,7 @@ * - add lock_owner field to fuse_setattr_in, fuse_read_in and fuse_write_in * - add blksize field to fuse_attr * - add file flags field to fuse_read_in and fuse_write_in + * - Add ATIME_NOW and MTIME_NOW flags to fuse_setattr_in * * 7.10 * - add nonseekable open flag @@ -54,7 +55,7 @@ * - add POLL message and NOTIFY_POLL notification * * 7.12 - * - add umask flag to input argument of open, mknod and mkdir + * - add umask flag to input argument of create, mknod and mkdir * - add notification messages for invalidation of inodes and * directory entries * @@ -125,6 +126,10 @@ * * 7.29 * - add FUSE_NO_OPENDIR_SUPPORT flag + * + * 7.30 + * - add FUSE_EXPLICIT_INVAL_DATA + * - add FUSE_IOCTL_COMPAT_X32 */ #ifndef _LINUX_FUSE_H @@ -160,7 +165,7 @@ #define FUSE_KERNEL_VERSION 7 /** Minor version number of this interface */ -#define FUSE_KERNEL_MINOR_VERSION 29 +#define FUSE_KERNEL_MINOR_VERSION 30 /** The node ID of the root inode */ #define FUSE_ROOT_ID 1 @@ -229,11 +234,13 @@ struct fuse_file_lock { * FOPEN_KEEP_CACHE: don't invalidate the data cache on open * FOPEN_NONSEEKABLE: the file is not seekable * FOPEN_CACHE_DIR: allow caching this directory + * FOPEN_STREAM: the file is stream-like (no file position at all) */ #define FOPEN_DIRECT_IO (1 << 0) #define FOPEN_KEEP_CACHE (1 << 1) #define FOPEN_NONSEEKABLE (1 << 2) #define FOPEN_CACHE_DIR (1 << 3) +#define FOPEN_STREAM (1 << 4) /** * INIT request/reply flags @@ -263,6 +270,7 @@ struct fuse_file_lock { * FUSE_MAX_PAGES: init_out.max_pages contains the max number of req pages * FUSE_CACHE_SYMLINKS: cache READLINK responses * FUSE_NO_OPENDIR_SUPPORT: kernel supports zero-message opendir + * FUSE_EXPLICIT_INVAL_DATA: only invalidate cached pages on explicit request */ #define FUSE_ASYNC_READ (1 << 0) #define FUSE_POSIX_LOCKS (1 << 1) @@ -289,6 +297,7 @@ struct fuse_file_lock { #define FUSE_MAX_PAGES (1 << 22) #define FUSE_CACHE_SYMLINKS (1 << 23) #define FUSE_NO_OPENDIR_SUPPORT (1 << 24) +#define FUSE_EXPLICIT_INVAL_DATA (1 << 25) /** * CUSE INIT request/reply flags @@ -335,6 +344,7 @@ struct fuse_file_lock { * FUSE_IOCTL_RETRY: retry with new iovecs * FUSE_IOCTL_32BIT: 32bit ioctl * FUSE_IOCTL_DIR: is a directory + * FUSE_IOCTL_COMPAT_X32: x32 compat ioctl on 64bit machine (64bit time_t) * * FUSE_IOCTL_MAX_IOV: maximum of in_iovecs + out_iovecs */ @@ -343,6 +353,7 @@ struct fuse_file_lock { #define FUSE_IOCTL_RETRY (1 << 2) #define FUSE_IOCTL_32BIT (1 << 3) #define FUSE_IOCTL_DIR (1 << 4) +#define FUSE_IOCTL_COMPAT_X32 (1 << 5) #define FUSE_IOCTL_MAX_IOV 256 @@ -353,6 +364,13 @@ struct fuse_file_lock { */ #define FUSE_POLL_SCHEDULE_NOTIFY (1 << 0) +/** + * Fsync flags + * + * FUSE_FSYNC_FDATASYNC: Sync data only, not metadata + */ +#define FUSE_FSYNC_FDATASYNC (1 << 0) + enum fuse_opcode { FUSE_LOOKUP = 1, FUSE_FORGET = 2, /* no reply */ diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h index 64cee116928e..85387c76c24f 100644 --- a/include/uapi/linux/input-event-codes.h +++ b/include/uapi/linux/input-event-codes.h @@ -606,6 +606,7 @@ #define KEY_SCREENSAVER 0x245 /* AL Screen Saver */ #define KEY_VOICECOMMAND 0x246 /* Listening Voice Command */ #define KEY_ASSISTANT 0x247 /* AL Context-aware desktop assistant */ +#define KEY_KBD_LAYOUT_NEXT 0x248 /* AC Next Keyboard Layout Select */ #define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */ #define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */ diff --git a/include/uapi/linux/kfd_ioctl.h b/include/uapi/linux/kfd_ioctl.h index e622fd1fbd46..dc067ed0b72d 100644 --- a/include/uapi/linux/kfd_ioctl.h +++ b/include/uapi/linux/kfd_ioctl.h @@ -211,6 +211,11 @@ struct kfd_ioctl_dbg_wave_control_args { #define KFD_HW_EXCEPTION_GPU_HANG 0 #define KFD_HW_EXCEPTION_ECC 1 +/* For kfd_hsa_memory_exception_data.ErrorType */ +#define KFD_MEM_ERR_NO_RAS 0 +#define KFD_MEM_ERR_SRAM_ECC 1 +#define KFD_MEM_ERR_POISON_CONSUMED 2 +#define KFD_MEM_ERR_GPU_HANG 3 struct kfd_ioctl_create_event_args { __u64 event_page_offset; /* from KFD */ @@ -250,7 +255,12 @@ struct kfd_hsa_memory_exception_data { struct kfd_memory_exception_failure failure; __u64 va; __u32 gpu_id; - __u32 pad; + __u32 ErrorType; /* 0 = no RAS error, + * 1 = ECC_SRAM, + * 2 = Link_SYNFLOOD (poison), + * 3 = GPU hang (not attributable to a specific cause), + * other values reserved + */ }; /* hw exception data */ diff --git a/include/uapi/linux/lirc.h b/include/uapi/linux/lirc.h index 45fcbf99d72e..f99d9dcae667 100644 --- a/include/uapi/linux/lirc.h +++ b/include/uapi/linux/lirc.h @@ -195,6 +195,7 @@ struct lirc_scancode { * @RC_PROTO_RCMM12: RC-MM protocol 12 bits * @RC_PROTO_RCMM24: RC-MM protocol 24 bits * @RC_PROTO_RCMM32: RC-MM protocol 32 bits + * @RC_PROTO_XBOX_DVD: Xbox DVD Movie Playback Kit protocol */ enum rc_proto { RC_PROTO_UNKNOWN = 0, @@ -224,6 +225,7 @@ enum rc_proto { RC_PROTO_RCMM12 = 24, RC_PROTO_RCMM24 = 25, RC_PROTO_RCMM32 = 26, + RC_PROTO_XBOX_DVD = 27, }; #endif diff --git a/include/uapi/linux/media-bus-format.h b/include/uapi/linux/media-bus-format.h index d6a5a3bfe6c4..2a6b253cfb05 100644 --- a/include/uapi/linux/media-bus-format.h +++ b/include/uapi/linux/media-bus-format.h @@ -34,7 +34,7 @@ #define MEDIA_BUS_FMT_FIXED 0x0001 -/* RGB - next is 0x101b */ +/* RGB - next is 0x101c */ #define MEDIA_BUS_FMT_RGB444_1X12 0x1016 #define MEDIA_BUS_FMT_RGB444_2X8_PADHI_BE 0x1001 #define MEDIA_BUS_FMT_RGB444_2X8_PADHI_LE 0x1002 @@ -50,6 +50,7 @@ #define MEDIA_BUS_FMT_RGB666_1X24_CPADHI 0x1015 #define MEDIA_BUS_FMT_RGB666_1X7X3_SPWG 0x1010 #define MEDIA_BUS_FMT_BGR888_1X24 0x1013 +#define MEDIA_BUS_FMT_BGR888_3X8 0x101b #define MEDIA_BUS_FMT_GBR888_1X24 0x1014 #define MEDIA_BUS_FMT_RGB888_1X24 0x100a #define MEDIA_BUS_FMT_RGB888_2X12_BE 0x100b diff --git a/include/uapi/linux/media.h b/include/uapi/linux/media.h index e5d0c5c611b5..9aedb187bc48 100644 --- a/include/uapi/linux/media.h +++ b/include/uapi/linux/media.h @@ -262,6 +262,11 @@ struct media_links_enum { #define MEDIA_INTF_T_V4L_SWRADIO (MEDIA_INTF_T_V4L_BASE + 4) #define MEDIA_INTF_T_V4L_TOUCH (MEDIA_INTF_T_V4L_BASE + 5) +#define MEDIA_INTF_T_ALSA_BASE 0x00000300 +#define MEDIA_INTF_T_ALSA_PCM_CAPTURE (MEDIA_INTF_T_ALSA_BASE) +#define MEDIA_INTF_T_ALSA_PCM_PLAYBACK (MEDIA_INTF_T_ALSA_BASE + 1) +#define MEDIA_INTF_T_ALSA_CONTROL (MEDIA_INTF_T_ALSA_BASE + 2) + #if defined(__KERNEL__) /* @@ -413,19 +418,19 @@ struct media_v2_topology { #define MEDIA_ENT_F_DTV_DECODER MEDIA_ENT_F_DV_DECODER /* - * There is still no ALSA support in the media controller. These + * There is still no full ALSA support in the media controller. These * defines should not have been added and we leave them here only * in case some application tries to use these defines. + * + * The ALSA defines that are in use have been moved into __KERNEL__ + * scope. As support gets added to these interface types, they should + * be moved into __KERNEL__ scope with the code that uses them. */ -#define MEDIA_INTF_T_ALSA_BASE 0x00000300 -#define MEDIA_INTF_T_ALSA_PCM_CAPTURE (MEDIA_INTF_T_ALSA_BASE) -#define MEDIA_INTF_T_ALSA_PCM_PLAYBACK (MEDIA_INTF_T_ALSA_BASE + 1) -#define MEDIA_INTF_T_ALSA_CONTROL (MEDIA_INTF_T_ALSA_BASE + 2) -#define MEDIA_INTF_T_ALSA_COMPRESS (MEDIA_INTF_T_ALSA_BASE + 3) -#define MEDIA_INTF_T_ALSA_RAWMIDI (MEDIA_INTF_T_ALSA_BASE + 4) -#define MEDIA_INTF_T_ALSA_HWDEP (MEDIA_INTF_T_ALSA_BASE + 5) -#define MEDIA_INTF_T_ALSA_SEQUENCER (MEDIA_INTF_T_ALSA_BASE + 6) -#define MEDIA_INTF_T_ALSA_TIMER (MEDIA_INTF_T_ALSA_BASE + 7) +#define MEDIA_INTF_T_ALSA_COMPRESS (MEDIA_INTF_T_ALSA_BASE + 3) +#define MEDIA_INTF_T_ALSA_RAWMIDI (MEDIA_INTF_T_ALSA_BASE + 4) +#define MEDIA_INTF_T_ALSA_HWDEP (MEDIA_INTF_T_ALSA_BASE + 5) +#define MEDIA_INTF_T_ALSA_SEQUENCER (MEDIA_INTF_T_ALSA_BASE + 6) +#define MEDIA_INTF_T_ALSA_TIMER (MEDIA_INTF_T_ALSA_BASE + 7) /* Obsolete symbol for media_version, no longer used in the kernel */ #define MEDIA_API_VERSION ((0 << 16) | (1 << 8) | 0) diff --git a/include/uapi/linux/netfilter/nf_tables.h b/include/uapi/linux/netfilter/nf_tables.h index f0cf7b0f4f35..505393c6e959 100644 --- a/include/uapi/linux/netfilter/nf_tables.h +++ b/include/uapi/linux/netfilter/nf_tables.h @@ -966,7 +966,6 @@ enum nft_socket_keys { * @NFT_CT_DST_IP: conntrack layer 3 protocol destination (IPv4 address) * @NFT_CT_SRC_IP6: conntrack layer 3 protocol source (IPv6 address) * @NFT_CT_DST_IP6: conntrack layer 3 protocol destination (IPv6 address) - * @NFT_CT_TIMEOUT: connection tracking timeout policy assigned to conntrack * @NFT_CT_ID: conntrack id */ enum nft_ct_keys { @@ -993,7 +992,6 @@ enum nft_ct_keys { NFT_CT_DST_IP, NFT_CT_SRC_IP6, NFT_CT_DST_IP6, - NFT_CT_TIMEOUT, NFT_CT_ID, __NFT_CT_MAX }; @@ -1138,7 +1136,7 @@ enum nft_log_level { NFT_LOGLEVEL_AUDIT, __NFT_LOGLEVEL_MAX }; -#define NFT_LOGLEVEL_MAX (__NFT_LOGLEVEL_MAX + 1) +#define NFT_LOGLEVEL_MAX (__NFT_LOGLEVEL_MAX - 1) /** * enum nft_queue_attributes - nf_tables queue expression netlink attributes diff --git a/include/uapi/linux/nfs_mount.h b/include/uapi/linux/nfs_mount.h index e44e00616ab5..e3bcfc6aa3b0 100644 --- a/include/uapi/linux/nfs_mount.h +++ b/include/uapi/linux/nfs_mount.h @@ -66,13 +66,4 @@ struct nfs_mount_data { #define NFS_MOUNT_UNSHARED 0x8000 /* 5 */ #define NFS_MOUNT_FLAGMASK 0xFFFF -/* The following are for internal use only */ -#define NFS_MOUNT_LOOKUP_CACHE_NONEG 0x10000 -#define NFS_MOUNT_LOOKUP_CACHE_NONE 0x20000 -#define NFS_MOUNT_NORESVPORT 0x40000 -#define NFS_MOUNT_LEGACY_INTERFACE 0x80000 - -#define NFS_MOUNT_LOCAL_FLOCK 0x100000 -#define NFS_MOUNT_LOCAL_FCNTL 0x200000 - #endif diff --git a/include/uapi/linux/nfsd/cld.h b/include/uapi/linux/nfsd/cld.h index f8f5cccad749..b1e9de4f07d5 100644 --- a/include/uapi/linux/nfsd/cld.h +++ b/include/uapi/linux/nfsd/cld.h @@ -36,6 +36,7 @@ enum cld_command { Cld_Remove, /* remove record of this cm_id */ Cld_Check, /* is this cm_id allowed? */ Cld_GraceDone, /* grace period is complete */ + Cld_GraceStart, }; /* representation of long-form NFSv4 client ID */ diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h index 5c98133f2c94..27164769d184 100644 --- a/include/uapi/linux/pci_regs.h +++ b/include/uapi/linux/pci_regs.h @@ -1,7 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ /* - * pci_regs.h - * * PCI standard defines * Copyright 1994, Drew Eckhardt * Copyright 1997--1999 Martin Mares <mj@ucw.cz> @@ -15,7 +13,7 @@ * PCI System Design Guide * * For HyperTransport information, please consult the following manuals - * from http://www.hypertransport.org + * from http://www.hypertransport.org : * * The HyperTransport I/O Link Specification */ @@ -301,7 +299,7 @@ #define PCI_SID_ESR_FIC 0x20 /* First In Chassis Flag */ #define PCI_SID_CHASSIS_NR 3 /* Chassis Number */ -/* Message Signalled Interrupts registers */ +/* Message Signalled Interrupt registers */ #define PCI_MSI_FLAGS 2 /* Message Control */ #define PCI_MSI_FLAGS_ENABLE 0x0001 /* MSI feature enabled */ @@ -319,7 +317,7 @@ #define PCI_MSI_MASK_64 16 /* Mask bits register for 64-bit devices */ #define PCI_MSI_PENDING_64 20 /* Pending intrs for 64-bit devices */ -/* MSI-X registers */ +/* MSI-X registers (in MSI-X capability) */ #define PCI_MSIX_FLAGS 2 /* Message Control */ #define PCI_MSIX_FLAGS_QSIZE 0x07FF /* Table size */ #define PCI_MSIX_FLAGS_MASKALL 0x4000 /* Mask all vectors for this function */ @@ -333,13 +331,13 @@ #define PCI_MSIX_FLAGS_BIRMASK PCI_MSIX_PBA_BIR /* deprecated */ #define PCI_CAP_MSIX_SIZEOF 12 /* size of MSIX registers */ -/* MSI-X Table entry format */ +/* MSI-X Table entry format (in memory mapped by a BAR) */ #define PCI_MSIX_ENTRY_SIZE 16 -#define PCI_MSIX_ENTRY_LOWER_ADDR 0 -#define PCI_MSIX_ENTRY_UPPER_ADDR 4 -#define PCI_MSIX_ENTRY_DATA 8 -#define PCI_MSIX_ENTRY_VECTOR_CTRL 12 -#define PCI_MSIX_ENTRY_CTRL_MASKBIT 1 +#define PCI_MSIX_ENTRY_LOWER_ADDR 0 /* Message Address */ +#define PCI_MSIX_ENTRY_UPPER_ADDR 4 /* Message Upper Address */ +#define PCI_MSIX_ENTRY_DATA 8 /* Message Data */ +#define PCI_MSIX_ENTRY_VECTOR_CTRL 12 /* Vector Control */ +#define PCI_MSIX_ENTRY_CTRL_MASKBIT 0x00000001 /* CompactPCI Hotswap Register */ @@ -372,6 +370,12 @@ #define PCI_EA_FIRST_ENT_BRIDGE 8 /* First EA Entry for Bridges */ #define PCI_EA_ES 0x00000007 /* Entry Size */ #define PCI_EA_BEI 0x000000f0 /* BAR Equivalent Indicator */ + +/* EA fixed Secondary and Subordinate bus numbers for Bridge */ +#define PCI_EA_SEC_BUS_MASK 0xff +#define PCI_EA_SUB_BUS_MASK 0xff00 +#define PCI_EA_SUB_BUS_SHIFT 8 + /* 0-5 map to BARs 0-5 respectively */ #define PCI_EA_BEI_BAR0 0 #define PCI_EA_BEI_BAR5 5 @@ -465,19 +469,19 @@ /* PCI Express capability registers */ #define PCI_EXP_FLAGS 2 /* Capabilities register */ -#define PCI_EXP_FLAGS_VERS 0x000f /* Capability version */ -#define PCI_EXP_FLAGS_TYPE 0x00f0 /* Device/Port type */ -#define PCI_EXP_TYPE_ENDPOINT 0x0 /* Express Endpoint */ -#define PCI_EXP_TYPE_LEG_END 0x1 /* Legacy Endpoint */ -#define PCI_EXP_TYPE_ROOT_PORT 0x4 /* Root Port */ -#define PCI_EXP_TYPE_UPSTREAM 0x5 /* Upstream Port */ -#define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */ -#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCIe to PCI/PCI-X Bridge */ -#define PCI_EXP_TYPE_PCIE_BRIDGE 0x8 /* PCI/PCI-X to PCIe Bridge */ -#define PCI_EXP_TYPE_RC_END 0x9 /* Root Complex Integrated Endpoint */ -#define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex Event Collector */ -#define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */ -#define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */ +#define PCI_EXP_FLAGS_VERS 0x000f /* Capability version */ +#define PCI_EXP_FLAGS_TYPE 0x00f0 /* Device/Port type */ +#define PCI_EXP_TYPE_ENDPOINT 0x0 /* Express Endpoint */ +#define PCI_EXP_TYPE_LEG_END 0x1 /* Legacy Endpoint */ +#define PCI_EXP_TYPE_ROOT_PORT 0x4 /* Root Port */ +#define PCI_EXP_TYPE_UPSTREAM 0x5 /* Upstream Port */ +#define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */ +#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCIe to PCI/PCI-X Bridge */ +#define PCI_EXP_TYPE_PCIE_BRIDGE 0x8 /* PCI/PCI-X to PCIe Bridge */ +#define PCI_EXP_TYPE_RC_END 0x9 /* Root Complex Integrated Endpoint */ +#define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex Event Collector */ +#define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */ +#define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */ #define PCI_EXP_DEVCAP 4 /* Device capabilities */ #define PCI_EXP_DEVCAP_PAYLOAD 0x00000007 /* Max_Payload_Size */ #define PCI_EXP_DEVCAP_PHANTOM 0x00000018 /* Phantom functions */ @@ -616,8 +620,8 @@ #define PCI_EXP_RTCAP 30 /* Root Capabilities */ #define PCI_EXP_RTCAP_CRSVIS 0x0001 /* CRS Software Visibility capability */ #define PCI_EXP_RTSTA 32 /* Root Status */ -#define PCI_EXP_RTSTA_PME 0x00010000 /* PME status */ -#define PCI_EXP_RTSTA_PENDING 0x00020000 /* PME pending */ +#define PCI_EXP_RTSTA_PME 0x00010000 /* PME status */ +#define PCI_EXP_RTSTA_PENDING 0x00020000 /* PME pending */ /* * The Device Capabilities 2, Device Status 2, Device Control 2, * Link Capabilities 2, Link Status 2, Link Control 2, @@ -637,13 +641,13 @@ #define PCI_EXP_DEVCAP2_OBFF_MASK 0x000c0000 /* OBFF support mechanism */ #define PCI_EXP_DEVCAP2_OBFF_MSG 0x00040000 /* New message signaling */ #define PCI_EXP_DEVCAP2_OBFF_WAKE 0x00080000 /* Re-use WAKE# for OBFF */ -#define PCI_EXP_DEVCAP2_EE_PREFIX 0x00200000 /* End-End TLP Prefix */ +#define PCI_EXP_DEVCAP2_EE_PREFIX 0x00200000 /* End-End TLP Prefix */ #define PCI_EXP_DEVCTL2 40 /* Device Control 2 */ #define PCI_EXP_DEVCTL2_COMP_TIMEOUT 0x000f /* Completion Timeout Value */ #define PCI_EXP_DEVCTL2_COMP_TMOUT_DIS 0x0010 /* Completion Timeout Disable */ #define PCI_EXP_DEVCTL2_ARI 0x0020 /* Alternative Routing-ID */ -#define PCI_EXP_DEVCTL2_ATOMIC_REQ 0x0040 /* Set Atomic requests */ -#define PCI_EXP_DEVCTL2_ATOMIC_EGRESS_BLOCK 0x0080 /* Block atomic egress */ +#define PCI_EXP_DEVCTL2_ATOMIC_REQ 0x0040 /* Set Atomic requests */ +#define PCI_EXP_DEVCTL2_ATOMIC_EGRESS_BLOCK 0x0080 /* Block atomic egress */ #define PCI_EXP_DEVCTL2_IDO_REQ_EN 0x0100 /* Allow IDO for requests */ #define PCI_EXP_DEVCTL2_IDO_CMP_EN 0x0200 /* Allow IDO for completions */ #define PCI_EXP_DEVCTL2_LTR_EN 0x0400 /* Enable LTR mechanism */ @@ -659,11 +663,11 @@ #define PCI_EXP_LNKCAP2_SLS_16_0GB 0x00000010 /* Supported Speed 16GT/s */ #define PCI_EXP_LNKCAP2_CROSSLINK 0x00000100 /* Crosslink supported */ #define PCI_EXP_LNKCTL2 48 /* Link Control 2 */ -#define PCI_EXP_LNKCTL2_TLS 0x000f -#define PCI_EXP_LNKCTL2_TLS_2_5GT 0x0001 /* Supported Speed 2.5GT/s */ -#define PCI_EXP_LNKCTL2_TLS_5_0GT 0x0002 /* Supported Speed 5GT/s */ -#define PCI_EXP_LNKCTL2_TLS_8_0GT 0x0003 /* Supported Speed 8GT/s */ -#define PCI_EXP_LNKCTL2_TLS_16_0GT 0x0004 /* Supported Speed 16GT/s */ +#define PCI_EXP_LNKCTL2_TLS 0x000f +#define PCI_EXP_LNKCTL2_TLS_2_5GT 0x0001 /* Supported Speed 2.5GT/s */ +#define PCI_EXP_LNKCTL2_TLS_5_0GT 0x0002 /* Supported Speed 5GT/s */ +#define PCI_EXP_LNKCTL2_TLS_8_0GT 0x0003 /* Supported Speed 8GT/s */ +#define PCI_EXP_LNKCTL2_TLS_16_0GT 0x0004 /* Supported Speed 16GT/s */ #define PCI_EXP_LNKSTA2 50 /* Link Status 2 */ #define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 52 /* v2 endpoints with link end here */ #define PCI_EXP_SLTCAP2 52 /* Slot Capabilities 2 */ @@ -752,18 +756,18 @@ #define PCI_ERR_CAP_ECRC_CHKE 0x00000100 /* ECRC Check Enable */ #define PCI_ERR_HEADER_LOG 28 /* Header Log Register (16 bytes) */ #define PCI_ERR_ROOT_COMMAND 44 /* Root Error Command */ -#define PCI_ERR_ROOT_CMD_COR_EN 0x00000001 /* Correctable Err Reporting Enable */ -#define PCI_ERR_ROOT_CMD_NONFATAL_EN 0x00000002 /* Non-Fatal Err Reporting Enable */ -#define PCI_ERR_ROOT_CMD_FATAL_EN 0x00000004 /* Fatal Err Reporting Enable */ +#define PCI_ERR_ROOT_CMD_COR_EN 0x00000001 /* Correctable Err Reporting Enable */ +#define PCI_ERR_ROOT_CMD_NONFATAL_EN 0x00000002 /* Non-Fatal Err Reporting Enable */ +#define PCI_ERR_ROOT_CMD_FATAL_EN 0x00000004 /* Fatal Err Reporting Enable */ #define PCI_ERR_ROOT_STATUS 48 -#define PCI_ERR_ROOT_COR_RCV 0x00000001 /* ERR_COR Received */ -#define PCI_ERR_ROOT_MULTI_COR_RCV 0x00000002 /* Multiple ERR_COR */ -#define PCI_ERR_ROOT_UNCOR_RCV 0x00000004 /* ERR_FATAL/NONFATAL */ -#define PCI_ERR_ROOT_MULTI_UNCOR_RCV 0x00000008 /* Multiple FATAL/NONFATAL */ -#define PCI_ERR_ROOT_FIRST_FATAL 0x00000010 /* First UNC is Fatal */ -#define PCI_ERR_ROOT_NONFATAL_RCV 0x00000020 /* Non-Fatal Received */ -#define PCI_ERR_ROOT_FATAL_RCV 0x00000040 /* Fatal Received */ -#define PCI_ERR_ROOT_AER_IRQ 0xf8000000 /* Advanced Error Interrupt Message Number */ +#define PCI_ERR_ROOT_COR_RCV 0x00000001 /* ERR_COR Received */ +#define PCI_ERR_ROOT_MULTI_COR_RCV 0x00000002 /* Multiple ERR_COR */ +#define PCI_ERR_ROOT_UNCOR_RCV 0x00000004 /* ERR_FATAL/NONFATAL */ +#define PCI_ERR_ROOT_MULTI_UNCOR_RCV 0x00000008 /* Multiple FATAL/NONFATAL */ +#define PCI_ERR_ROOT_FIRST_FATAL 0x00000010 /* First UNC is Fatal */ +#define PCI_ERR_ROOT_NONFATAL_RCV 0x00000020 /* Non-Fatal Received */ +#define PCI_ERR_ROOT_FATAL_RCV 0x00000040 /* Fatal Received */ +#define PCI_ERR_ROOT_AER_IRQ 0xf8000000 /* Advanced Error Interrupt Message Number */ #define PCI_ERR_ROOT_ERR_SRC 52 /* Error Source Identification */ /* Virtual Channel */ @@ -875,12 +879,12 @@ /* Page Request Interface */ #define PCI_PRI_CTRL 0x04 /* PRI control register */ -#define PCI_PRI_CTRL_ENABLE 0x01 /* Enable */ -#define PCI_PRI_CTRL_RESET 0x02 /* Reset */ +#define PCI_PRI_CTRL_ENABLE 0x0001 /* Enable */ +#define PCI_PRI_CTRL_RESET 0x0002 /* Reset */ #define PCI_PRI_STATUS 0x06 /* PRI status register */ -#define PCI_PRI_STATUS_RF 0x001 /* Response Failure */ -#define PCI_PRI_STATUS_UPRGI 0x002 /* Unexpected PRG index */ -#define PCI_PRI_STATUS_STOPPED 0x100 /* PRI Stopped */ +#define PCI_PRI_STATUS_RF 0x0001 /* Response Failure */ +#define PCI_PRI_STATUS_UPRGI 0x0002 /* Unexpected PRG index */ +#define PCI_PRI_STATUS_STOPPED 0x0100 /* PRI Stopped */ #define PCI_PRI_STATUS_PASID 0x8000 /* PRG Response PASID Required */ #define PCI_PRI_MAX_REQ 0x08 /* PRI max reqs supported */ #define PCI_PRI_ALLOC_REQ 0x0c /* PRI max reqs allowed */ @@ -898,16 +902,16 @@ /* Single Root I/O Virtualization */ #define PCI_SRIOV_CAP 0x04 /* SR-IOV Capabilities */ -#define PCI_SRIOV_CAP_VFM 0x01 /* VF Migration Capable */ +#define PCI_SRIOV_CAP_VFM 0x00000001 /* VF Migration Capable */ #define PCI_SRIOV_CAP_INTR(x) ((x) >> 21) /* Interrupt Message Number */ #define PCI_SRIOV_CTRL 0x08 /* SR-IOV Control */ -#define PCI_SRIOV_CTRL_VFE 0x01 /* VF Enable */ -#define PCI_SRIOV_CTRL_VFM 0x02 /* VF Migration Enable */ -#define PCI_SRIOV_CTRL_INTR 0x04 /* VF Migration Interrupt Enable */ -#define PCI_SRIOV_CTRL_MSE 0x08 /* VF Memory Space Enable */ -#define PCI_SRIOV_CTRL_ARI 0x10 /* ARI Capable Hierarchy */ +#define PCI_SRIOV_CTRL_VFE 0x0001 /* VF Enable */ +#define PCI_SRIOV_CTRL_VFM 0x0002 /* VF Migration Enable */ +#define PCI_SRIOV_CTRL_INTR 0x0004 /* VF Migration Interrupt Enable */ +#define PCI_SRIOV_CTRL_MSE 0x0008 /* VF Memory Space Enable */ +#define PCI_SRIOV_CTRL_ARI 0x0010 /* ARI Capable Hierarchy */ #define PCI_SRIOV_STATUS 0x0a /* SR-IOV Status */ -#define PCI_SRIOV_STATUS_VFM 0x01 /* VF Migration Status */ +#define PCI_SRIOV_STATUS_VFM 0x0001 /* VF Migration Status */ #define PCI_SRIOV_INITIAL_VF 0x0c /* Initial VFs */ #define PCI_SRIOV_TOTAL_VF 0x0e /* Total VFs */ #define PCI_SRIOV_NUM_VF 0x10 /* Number of VFs */ @@ -937,13 +941,13 @@ /* Access Control Service */ #define PCI_ACS_CAP 0x04 /* ACS Capability Register */ -#define PCI_ACS_SV 0x01 /* Source Validation */ -#define PCI_ACS_TB 0x02 /* Translation Blocking */ -#define PCI_ACS_RR 0x04 /* P2P Request Redirect */ -#define PCI_ACS_CR 0x08 /* P2P Completion Redirect */ -#define PCI_ACS_UF 0x10 /* Upstream Forwarding */ -#define PCI_ACS_EC 0x20 /* P2P Egress Control */ -#define PCI_ACS_DT 0x40 /* Direct Translated P2P */ +#define PCI_ACS_SV 0x0001 /* Source Validation */ +#define PCI_ACS_TB 0x0002 /* Translation Blocking */ +#define PCI_ACS_RR 0x0004 /* P2P Request Redirect */ +#define PCI_ACS_CR 0x0008 /* P2P Completion Redirect */ +#define PCI_ACS_UF 0x0010 /* Upstream Forwarding */ +#define PCI_ACS_EC 0x0020 /* P2P Egress Control */ +#define PCI_ACS_DT 0x0040 /* Direct Translated P2P */ #define PCI_ACS_EGRESS_BITS 0x05 /* ACS Egress Control Vector Size */ #define PCI_ACS_CTRL 0x06 /* ACS Control Register */ #define PCI_ACS_EGRESS_CTL_V 0x08 /* ACS Egress Control Vector */ @@ -993,9 +997,9 @@ #define PCI_EXP_DPC_CAP_DL_ACTIVE 0x1000 /* ERR_COR signal on DL_Active supported */ #define PCI_EXP_DPC_CTL 6 /* DPC control */ -#define PCI_EXP_DPC_CTL_EN_FATAL 0x0001 /* Enable trigger on ERR_FATAL message */ -#define PCI_EXP_DPC_CTL_EN_NONFATAL 0x0002 /* Enable trigger on ERR_NONFATAL message */ -#define PCI_EXP_DPC_CTL_INT_EN 0x0008 /* DPC Interrupt Enable */ +#define PCI_EXP_DPC_CTL_EN_FATAL 0x0001 /* Enable trigger on ERR_FATAL message */ +#define PCI_EXP_DPC_CTL_EN_NONFATAL 0x0002 /* Enable trigger on ERR_NONFATAL message */ +#define PCI_EXP_DPC_CTL_INT_EN 0x0008 /* DPC Interrupt Enable */ #define PCI_EXP_DPC_STATUS 8 /* DPC Status */ #define PCI_EXP_DPC_STATUS_TRIGGER 0x0001 /* Trigger Status */ diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 6009ee2c2e99..67c4aaaa2308 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -287,4 +287,10 @@ /* RDA UART */ #define PORT_RDA 118 +/* Socionext Milbeaut UART */ +#define PORT_MLB_USIO 119 + +/* SiFive UART */ +#define PORT_SIFIVE_V0 120 + #endif /* _UAPILINUX_SERIAL_CORE_H */ diff --git a/include/uapi/linux/switchtec_ioctl.h b/include/uapi/linux/switchtec_ioctl.h index 4f4daf8db954..c912b5a678e4 100644 --- a/include/uapi/linux/switchtec_ioctl.h +++ b/include/uapi/linux/switchtec_ioctl.h @@ -50,7 +50,7 @@ struct switchtec_ioctl_flash_part_info { __u32 active; }; -struct switchtec_ioctl_event_summary { +struct switchtec_ioctl_event_summary_legacy { __u64 global; __u64 part_bitmap; __u32 local_part; @@ -59,6 +59,15 @@ struct switchtec_ioctl_event_summary { __u32 pff[48]; }; +struct switchtec_ioctl_event_summary { + __u64 global; + __u64 part_bitmap; + __u32 local_part; + __u32 padding; + __u32 part[48]; + __u32 pff[255]; +}; + #define SWITCHTEC_IOCTL_EVENT_STACK_ERROR 0 #define SWITCHTEC_IOCTL_EVENT_PPU_ERROR 1 #define SWITCHTEC_IOCTL_EVENT_ISP_ERROR 2 @@ -127,6 +136,8 @@ struct switchtec_ioctl_pff_port { _IOWR('W', 0x41, struct switchtec_ioctl_flash_part_info) #define SWITCHTEC_IOCTL_EVENT_SUMMARY \ _IOR('W', 0x42, struct switchtec_ioctl_event_summary) +#define SWITCHTEC_IOCTL_EVENT_SUMMARY_LEGACY \ + _IOR('W', 0x42, struct switchtec_ioctl_event_summary_legacy) #define SWITCHTEC_IOCTL_EVENT_CTL \ _IOWR('W', 0x43, struct switchtec_ioctl_event_ctl) #define SWITCHTEC_IOCTL_PFF_TO_PORT \ diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index 06479f2fb3ae..37807f23231e 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -404,6 +404,10 @@ enum v4l2_mpeg_video_multi_slice_mode { #define V4L2_CID_MPEG_VIDEO_MV_V_SEARCH_RANGE (V4L2_CID_MPEG_BASE+228) #define V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME (V4L2_CID_MPEG_BASE+229) +/* CIDs for the FWHT codec as used by the vicodec driver. */ +#define V4L2_CID_FWHT_I_FRAME_QP (V4L2_CID_MPEG_BASE + 290) +#define V4L2_CID_FWHT_P_FRAME_QP (V4L2_CID_MPEG_BASE + 291) + #define V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP (V4L2_CID_MPEG_BASE+300) #define V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP (V4L2_CID_MPEG_BASE+301) #define V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP (V4L2_CID_MPEG_BASE+302) @@ -535,6 +539,10 @@ enum v4l2_mpeg_video_h264_hierarchical_coding_type { #define V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER_QP (V4L2_CID_MPEG_BASE+382) #define V4L2_CID_MPEG_VIDEO_H264_CONSTRAINED_INTRA_PREDICTION (V4L2_CID_MPEG_BASE+383) #define V4L2_CID_MPEG_VIDEO_H264_CHROMA_QP_INDEX_OFFSET (V4L2_CID_MPEG_BASE+384) +#define V4L2_CID_MPEG_VIDEO_H264_I_FRAME_MIN_QP (V4L2_CID_MPEG_BASE+385) +#define V4L2_CID_MPEG_VIDEO_H264_I_FRAME_MAX_QP (V4L2_CID_MPEG_BASE+386) +#define V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MIN_QP (V4L2_CID_MPEG_BASE+387) +#define V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MAX_QP (V4L2_CID_MPEG_BASE+388) #define V4L2_CID_MPEG_VIDEO_MPEG4_I_FRAME_QP (V4L2_CID_MPEG_BASE+400) #define V4L2_CID_MPEG_VIDEO_MPEG4_P_FRAME_QP (V4L2_CID_MPEG_BASE+401) #define V4L2_CID_MPEG_VIDEO_MPEG4_B_FRAME_QP (V4L2_CID_MPEG_BASE+402) diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index 1db220da3bcc..1050a75fb7ef 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -514,9 +514,21 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_RGB444 v4l2_fourcc('R', '4', '4', '4') /* 16 xxxxrrrr ggggbbbb */ #define V4L2_PIX_FMT_ARGB444 v4l2_fourcc('A', 'R', '1', '2') /* 16 aaaarrrr ggggbbbb */ #define V4L2_PIX_FMT_XRGB444 v4l2_fourcc('X', 'R', '1', '2') /* 16 xxxxrrrr ggggbbbb */ +#define V4L2_PIX_FMT_RGBA444 v4l2_fourcc('R', 'A', '1', '2') /* 16 rrrrgggg bbbbaaaa */ +#define V4L2_PIX_FMT_RGBX444 v4l2_fourcc('R', 'X', '1', '2') /* 16 rrrrgggg bbbbxxxx */ +#define V4L2_PIX_FMT_ABGR444 v4l2_fourcc('A', 'B', '1', '2') /* 16 aaaabbbb ggggrrrr */ +#define V4L2_PIX_FMT_XBGR444 v4l2_fourcc('X', 'B', '1', '2') /* 16 xxxxbbbb ggggrrrr */ +#define V4L2_PIX_FMT_BGRA444 v4l2_fourcc('B', 'A', '1', '2') /* 16 bbbbgggg rrrraaaa */ +#define V4L2_PIX_FMT_BGRX444 v4l2_fourcc('B', 'X', '1', '2') /* 16 bbbbgggg rrrrxxxx */ #define V4L2_PIX_FMT_RGB555 v4l2_fourcc('R', 'G', 'B', 'O') /* 16 RGB-5-5-5 */ #define V4L2_PIX_FMT_ARGB555 v4l2_fourcc('A', 'R', '1', '5') /* 16 ARGB-1-5-5-5 */ #define V4L2_PIX_FMT_XRGB555 v4l2_fourcc('X', 'R', '1', '5') /* 16 XRGB-1-5-5-5 */ +#define V4L2_PIX_FMT_RGBA555 v4l2_fourcc('R', 'A', '1', '5') /* 16 RGBA-5-5-5-1 */ +#define V4L2_PIX_FMT_RGBX555 v4l2_fourcc('R', 'X', '1', '5') /* 16 RGBX-5-5-5-1 */ +#define V4L2_PIX_FMT_ABGR555 v4l2_fourcc('A', 'B', '1', '5') /* 16 ABGR-1-5-5-5 */ +#define V4L2_PIX_FMT_XBGR555 v4l2_fourcc('X', 'B', '1', '5') /* 16 XBGR-1-5-5-5 */ +#define V4L2_PIX_FMT_BGRA555 v4l2_fourcc('B', 'A', '1', '5') /* 16 BGRA-5-5-5-1 */ +#define V4L2_PIX_FMT_BGRX555 v4l2_fourcc('B', 'X', '1', '5') /* 16 BGRX-5-5-5-1 */ #define V4L2_PIX_FMT_RGB565 v4l2_fourcc('R', 'G', 'B', 'P') /* 16 RGB-5-6-5 */ #define V4L2_PIX_FMT_RGB555X v4l2_fourcc('R', 'G', 'B', 'Q') /* 16 RGB-5-5-5 BE */ #define V4L2_PIX_FMT_ARGB555X v4l2_fourcc_be('A', 'R', '1', '5') /* 16 ARGB-5-5-5 BE */ @@ -528,7 +540,11 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_BGR32 v4l2_fourcc('B', 'G', 'R', '4') /* 32 BGR-8-8-8-8 */ #define V4L2_PIX_FMT_ABGR32 v4l2_fourcc('A', 'R', '2', '4') /* 32 BGRA-8-8-8-8 */ #define V4L2_PIX_FMT_XBGR32 v4l2_fourcc('X', 'R', '2', '4') /* 32 BGRX-8-8-8-8 */ +#define V4L2_PIX_FMT_BGRA32 v4l2_fourcc('R', 'A', '2', '4') /* 32 ABGR-8-8-8-8 */ +#define V4L2_PIX_FMT_BGRX32 v4l2_fourcc('R', 'X', '2', '4') /* 32 XBGR-8-8-8-8 */ #define V4L2_PIX_FMT_RGB32 v4l2_fourcc('R', 'G', 'B', '4') /* 32 RGB-8-8-8-8 */ +#define V4L2_PIX_FMT_RGBA32 v4l2_fourcc('A', 'B', '2', '4') /* 32 RGBA-8-8-8-8 */ +#define V4L2_PIX_FMT_RGBX32 v4l2_fourcc('X', 'B', '2', '4') /* 32 RGBX-8-8-8-8 */ #define V4L2_PIX_FMT_ARGB32 v4l2_fourcc('B', 'A', '2', '4') /* 32 ARGB-8-8-8-8 */ #define V4L2_PIX_FMT_XRGB32 v4l2_fourcc('B', 'X', '2', '4') /* 32 XRGB-8-8-8-8 */ @@ -669,6 +685,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_VP9 v4l2_fourcc('V', 'P', '9', '0') /* VP9 */ #define V4L2_PIX_FMT_HEVC v4l2_fourcc('H', 'E', 'V', 'C') /* HEVC aka H.265 */ #define V4L2_PIX_FMT_FWHT v4l2_fourcc('F', 'W', 'H', 'T') /* Fast Walsh Hadamard Transform (vicodec) */ +#define V4L2_PIX_FMT_FWHT_STATELESS v4l2_fourcc('S', 'F', 'W', 'H') /* Stateless FWHT (vicodec) */ /* Vendor-specific formats */ #define V4L2_PIX_FMT_CPIA1 v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */ diff --git a/include/uapi/linux/virtio_gpu.h b/include/uapi/linux/virtio_gpu.h index 8e88eba1fa7a..0c85914d9369 100644 --- a/include/uapi/linux/virtio_gpu.h +++ b/include/uapi/linux/virtio_gpu.h @@ -40,8 +40,16 @@ #include <linux/types.h> -#define VIRTIO_GPU_F_VIRGL 0 -#define VIRTIO_GPU_F_EDID 1 +/* + * VIRTIO_GPU_CMD_CTX_* + * VIRTIO_GPU_CMD_*_3D + */ +#define VIRTIO_GPU_F_VIRGL 0 + +/* + * VIRTIO_GPU_CMD_GET_EDID + */ +#define VIRTIO_GPU_F_EDID 1 enum virtio_gpu_ctrl_type { VIRTIO_GPU_UNDEFINED = 0, |