diff options
Diffstat (limited to 'include/uapi/linux')
| -rw-r--r-- | include/uapi/linux/bpf.h | 116 | ||||
| -rw-r--r-- | include/uapi/linux/dn.h | 149 | ||||
| -rw-r--r-- | include/uapi/linux/if_macsec.h | 2 | ||||
| -rw-r--r-- | include/uapi/linux/in.h | 20 | ||||
| -rw-r--r-- | include/uapi/linux/netfilter_decnet.h | 72 | ||||
| -rw-r--r-- | include/uapi/linux/netlink.h | 29 | ||||
| -rw-r--r-- | include/uapi/linux/nl80211.h | 25 | ||||
| -rw-r--r-- | include/uapi/linux/openvswitch.h | 3 |
8 files changed, 154 insertions, 262 deletions
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 59a217ca2dfd..793103b10eab 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -87,10 +87,29 @@ struct bpf_cgroup_storage_key { __u32 attach_type; /* program attach type (enum bpf_attach_type) */ }; +enum bpf_cgroup_iter_order { + BPF_CGROUP_ITER_ORDER_UNSPEC = 0, + BPF_CGROUP_ITER_SELF_ONLY, /* process only a single object. */ + BPF_CGROUP_ITER_DESCENDANTS_PRE, /* walk descendants in pre-order. */ + BPF_CGROUP_ITER_DESCENDANTS_POST, /* walk descendants in post-order. */ + BPF_CGROUP_ITER_ANCESTORS_UP, /* walk ancestors upward. */ +}; + union bpf_iter_link_info { struct { __u32 map_fd; } map; + struct { + enum bpf_cgroup_iter_order order; + + /* At most one of cgroup_fd and cgroup_id can be non-zero. If + * both are zero, the walk starts from the default cgroup v2 + * root. For walking v1 hierarchy, one should always explicitly + * specify cgroup_fd. + */ + __u32 cgroup_fd; + __u64 cgroup_id; + } cgroup; }; /* BPF syscall commands, see bpf(2) man-page for more details. */ @@ -2573,10 +2592,12 @@ union bpf_attr { * There are two supported modes at this time: * * * **BPF_ADJ_ROOM_MAC**: Adjust room at the mac layer - * (room space is added or removed below the layer 2 header). + * (room space is added or removed between the layer 2 and + * layer 3 headers). * * * **BPF_ADJ_ROOM_NET**: Adjust room at the network layer - * (room space is added or removed below the layer 3 header). + * (room space is added or removed between the layer 3 and + * layer 4 headers). * * The following flags are supported at this time: * @@ -3008,8 +3029,18 @@ union bpf_attr { * **BPF_F_USER_STACK** * Collect a user space stack instead of a kernel stack. * **BPF_F_USER_BUILD_ID** - * Collect buildid+offset instead of ips for user stack, - * only valid if **BPF_F_USER_STACK** is also specified. + * Collect (build_id, file_offset) instead of ips for user + * stack, only valid if **BPF_F_USER_STACK** is also + * specified. + * + * *file_offset* is an offset relative to the beginning + * of the executable or shared object file backing the vma + * which the *ip* falls in. It is *not* an offset relative + * to that object's base address. Accordingly, it must be + * adjusted by adding (sh_addr - sh_offset), where + * sh_{addr,offset} correspond to the executable section + * containing *file_offset* in the object, for comparisons + * to symbols' st_value to be valid. * * **bpf_get_stack**\ () can collect up to * **PERF_MAX_STACK_DEPTH** both kernel and user frames, subject @@ -4425,7 +4456,7 @@ union bpf_attr { * * **-EEXIST** if the option already exists. * - * **-EFAULT** on failrue to parse the existing header options. + * **-EFAULT** on failure to parse the existing header options. * * **-EPERM** if the helper cannot be used under the current * *skops*\ **->op**. @@ -4634,7 +4665,7 @@ union bpf_attr { * a *map* with *task* as the **key**. From this * perspective, the usage is not much different from * **bpf_map_lookup_elem**\ (*map*, **&**\ *task*) except this - * helper enforces the key must be an task_struct and the map must also + * helper enforces the key must be a task_struct and the map must also * be a **BPF_MAP_TYPE_TASK_STORAGE**. * * Underneath, the value is stored locally at *task* instead of @@ -4692,7 +4723,7 @@ union bpf_attr { * * long bpf_ima_inode_hash(struct inode *inode, void *dst, u32 size) * Description - * Returns the stored IMA hash of the *inode* (if it's avaialable). + * Returns the stored IMA hash of the *inode* (if it's available). * If the hash is larger than *size*, then only *size* * bytes will be copied to *dst* * Return @@ -4716,12 +4747,12 @@ union bpf_attr { * * The argument *len_diff* can be used for querying with a planned * size change. This allows to check MTU prior to changing packet - * ctx. Providing an *len_diff* adjustment that is larger than the + * ctx. Providing a *len_diff* adjustment that is larger than the * actual packet size (resulting in negative packet size) will in - * principle not exceed the MTU, why it is not considered a - * failure. Other BPF-helpers are needed for performing the - * planned size change, why the responsability for catch a negative - * packet size belong in those helpers. + * principle not exceed the MTU, which is why it is not considered + * a failure. Other BPF helpers are needed for performing the + * planned size change; therefore the responsibility for catching + * a negative packet size belongs in those helpers. * * Specifying *ifindex* zero means the MTU check is performed * against the current net device. This is practical if this isn't @@ -5073,17 +5104,29 @@ union bpf_attr { * * int bpf_get_retval(void) * Description - * Get the syscall's return value that will be returned to userspace. + * Get the BPF program's return value that will be returned to the upper layers. * - * This helper is currently supported by cgroup programs only. + * This helper is currently supported by cgroup programs and only by the hooks + * where BPF program's return value is returned to the userspace via errno. * Return - * The syscall's return value. + * The BPF program's return value. * * int bpf_set_retval(int retval) * Description - * Set the syscall's return value that will be returned to userspace. + * Set the BPF program's return value that will be returned to the upper layers. + * + * This helper is currently supported by cgroup programs and only by the hooks + * where BPF program's return value is returned to the userspace via errno. + * + * Note that there is the following corner case where the program exports an error + * via bpf_set_retval but signals success via 'return 1': + * + * bpf_set_retval(-EPERM); + * return 1; + * + * In this case, the BPF program's return value will use helper's -EPERM. This + * still holds true for cgroup/bind{4,6} which supports extra 'return 3' success case. * - * This helper is currently supported by cgroup programs only. * Return * 0 on success, or a negative error in case of failure. * @@ -5331,6 +5374,18 @@ union bpf_attr { * **-EACCES** if the SYN cookie is not valid. * * **-EPROTONOSUPPORT** if CONFIG_IPV6 is not builtin. + * + * u64 bpf_ktime_get_tai_ns(void) + * Description + * A nonsettable system-wide clock derived from wall-clock time but + * ignoring leap seconds. This clock does not experience + * discontinuities and backwards jumps caused by NTP inserting leap + * seconds as CLOCK_REALTIME does. + * + * See: **clock_gettime**\ (**CLOCK_TAI**) + * Return + * Current *ktime*. + * */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -5541,6 +5596,7 @@ union bpf_attr { FN(tcp_raw_gen_syncookie_ipv6), \ FN(tcp_raw_check_syncookie_ipv4), \ FN(tcp_raw_check_syncookie_ipv6), \ + FN(ktime_get_tai_ns), \ /* */ /* integer value in 'imm' field of BPF_CALL instruction selects which helper @@ -5603,6 +5659,11 @@ enum { BPF_F_SEQ_NUMBER = (1ULL << 3), }; +/* BPF_FUNC_skb_get_tunnel_key flags. */ +enum { + BPF_F_TUNINFO_FLAGS = (1ULL << 4), +}; + /* BPF_FUNC_perf_event_output, BPF_FUNC_perf_event_read and * BPF_FUNC_perf_event_read_value flags. */ @@ -5792,7 +5853,10 @@ struct bpf_tunnel_key { }; __u8 tunnel_tos; __u8 tunnel_ttl; - __u16 tunnel_ext; /* Padding, future use. */ + union { + __u16 tunnel_ext; /* compat */ + __be16 tunnel_flags; + }; __u32 tunnel_label; union { __u32 local_ipv4; @@ -5836,6 +5900,11 @@ enum bpf_ret_code { * represented by BPF_REDIRECT above). */ BPF_LWT_REROUTE = 128, + /* BPF_FLOW_DISSECTOR_CONTINUE: used by BPF_PROG_TYPE_FLOW_DISSECTOR + * to indicate that no custom dissection was performed, and + * fallback to standard dissector is requested. + */ + BPF_FLOW_DISSECTOR_CONTINUE = 129, }; struct bpf_sock { @@ -6134,11 +6203,22 @@ struct bpf_link_info { struct { __aligned_u64 target_name; /* in/out: target_name buffer ptr */ __u32 target_name_len; /* in/out: target_name buffer len */ + + /* If the iter specific field is 32 bits, it can be put + * in the first or second union. Otherwise it should be + * put in the second union. + */ union { struct { __u32 map_id; } map; }; + union { + struct { + __u64 cgroup_id; + __u32 order; + } cgroup; + }; } iter; struct { __u32 netns_ino; diff --git a/include/uapi/linux/dn.h b/include/uapi/linux/dn.h deleted file mode 100644 index 36ca71bd8bbe..000000000000 --- a/include/uapi/linux/dn.h +++ /dev/null @@ -1,149 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _LINUX_DN_H -#define _LINUX_DN_H - -#include <linux/ioctl.h> -#include <linux/types.h> -#include <linux/if_ether.h> - -/* - - DECnet Data Structures and Constants - -*/ - -/* - * DNPROTO_NSP can't be the same as SOL_SOCKET, - * so increment each by one (compared to ULTRIX) - */ -#define DNPROTO_NSP 2 /* NSP protocol number */ -#define DNPROTO_ROU 3 /* Routing protocol number */ -#define DNPROTO_NML 4 /* Net mgt protocol number */ -#define DNPROTO_EVL 5 /* Evl protocol number (usr) */ -#define DNPROTO_EVR 6 /* Evl protocol number (evl) */ -#define DNPROTO_NSPT 7 /* NSP trace protocol number */ - - -#define DN_ADDL 2 -#define DN_MAXADDL 2 /* ULTRIX headers have 20 here, but pathworks has 2 */ -#define DN_MAXOPTL 16 -#define DN_MAXOBJL 16 -#define DN_MAXACCL 40 -#define DN_MAXALIASL 128 -#define DN_MAXNODEL 256 -#define DNBUFSIZE 65023 - -/* - * SET/GET Socket options - must match the DSO_ numbers below - */ -#define SO_CONDATA 1 -#define SO_CONACCESS 2 -#define SO_PROXYUSR 3 -#define SO_LINKINFO 7 - -#define DSO_CONDATA 1 /* Set/Get connect data */ -#define DSO_DISDATA 10 /* Set/Get disconnect data */ -#define DSO_CONACCESS 2 /* Set/Get connect access data */ -#define DSO_ACCEPTMODE 4 /* Set/Get accept mode */ -#define DSO_CONACCEPT 5 /* Accept deferred connection */ -#define DSO_CONREJECT 6 /* Reject deferred connection */ -#define DSO_LINKINFO 7 /* Set/Get link information */ -#define DSO_STREAM 8 /* Set socket type to stream */ -#define DSO_SEQPACKET 9 /* Set socket type to sequenced packet */ -#define DSO_MAXWINDOW 11 /* Maximum window size allowed */ -#define DSO_NODELAY 12 /* Turn off nagle */ -#define DSO_CORK 13 /* Wait for more data! */ -#define DSO_SERVICES 14 /* NSP Services field */ -#define DSO_INFO 15 /* NSP Info field */ -#define DSO_MAX 15 /* Maximum option number */ - - -/* LINK States */ -#define LL_INACTIVE 0 -#define LL_CONNECTING 1 -#define LL_RUNNING 2 -#define LL_DISCONNECTING 3 - -#define ACC_IMMED 0 -#define ACC_DEFER 1 - -#define SDF_WILD 1 /* Wild card object */ -#define SDF_PROXY 2 /* Addr eligible for proxy */ -#define SDF_UICPROXY 4 /* Use uic-based proxy */ - -/* Structures */ - - -struct dn_naddr { - __le16 a_len; - __u8 a_addr[DN_MAXADDL]; /* Two bytes little endian */ -}; - -struct sockaddr_dn { - __u16 sdn_family; - __u8 sdn_flags; - __u8 sdn_objnum; - __le16 sdn_objnamel; - __u8 sdn_objname[DN_MAXOBJL]; - struct dn_naddr sdn_add; -}; -#define sdn_nodeaddrl sdn_add.a_len /* Node address length */ -#define sdn_nodeaddr sdn_add.a_addr /* Node address */ - - - -/* - * DECnet set/get DSO_CONDATA, DSO_DISDATA (optional data) structure - */ -struct optdata_dn { - __le16 opt_status; /* Extended status return */ -#define opt_sts opt_status - __le16 opt_optl; /* Length of user data */ - __u8 opt_data[16]; /* User data */ -}; - -struct accessdata_dn { - __u8 acc_accl; - __u8 acc_acc[DN_MAXACCL]; - __u8 acc_passl; - __u8 acc_pass[DN_MAXACCL]; - __u8 acc_userl; - __u8 acc_user[DN_MAXACCL]; -}; - -/* - * DECnet logical link information structure - */ -struct linkinfo_dn { - __u16 idn_segsize; /* Segment size for link */ - __u8 idn_linkstate; /* Logical link state */ -}; - -/* - * Ethernet address format (for DECnet) - */ -union etheraddress { - __u8 dne_addr[ETH_ALEN]; /* Full ethernet address */ - struct { - __u8 dne_hiord[4]; /* DECnet HIORD prefix */ - __u8 dne_nodeaddr[2]; /* DECnet node address */ - } dne_remote; -}; - - -/* - * DECnet physical socket address format - */ -struct dn_addr { - __le16 dna_family; /* AF_DECnet */ - union etheraddress dna_netaddr; /* DECnet ethernet address */ -}; - -#define DECNET_IOCTL_BASE 0x89 /* PROTOPRIVATE range */ - -#define SIOCSNETADDR _IOW(DECNET_IOCTL_BASE, 0xe0, struct dn_naddr) -#define SIOCGNETADDR _IOR(DECNET_IOCTL_BASE, 0xe1, struct dn_naddr) -#define OSIOCSNETADDR _IOW(DECNET_IOCTL_BASE, 0xe0, int) -#define OSIOCGNETADDR _IOR(DECNET_IOCTL_BASE, 0xe1, int) - -#endif /* _LINUX_DN_H */ diff --git a/include/uapi/linux/if_macsec.h b/include/uapi/linux/if_macsec.h index 3af2aa069a36..d5b6d1f37353 100644 --- a/include/uapi/linux/if_macsec.h +++ b/include/uapi/linux/if_macsec.h @@ -22,6 +22,8 @@ #define MACSEC_KEYID_LEN 16 +#define MACSEC_SALT_LEN 12 + /* cipher IDs as per IEEE802.1AE-2018 (Table 14-1) */ #define MACSEC_CIPHER_ID_GCM_AES_128 0x0080C20001000001ULL #define MACSEC_CIPHER_ID_GCM_AES_256 0x0080C20001000002ULL diff --git a/include/uapi/linux/in.h b/include/uapi/linux/in.h index 14168225cecd..578daa6f816b 100644 --- a/include/uapi/linux/in.h +++ b/include/uapi/linux/in.h @@ -188,21 +188,13 @@ struct ip_mreq_source { }; struct ip_msfilter { + __be32 imsf_multiaddr; + __be32 imsf_interface; + __u32 imsf_fmode; + __u32 imsf_numsrc; union { - struct { - __be32 imsf_multiaddr_aux; - __be32 imsf_interface_aux; - __u32 imsf_fmode_aux; - __u32 imsf_numsrc_aux; - __be32 imsf_slist[1]; - }; - struct { - __be32 imsf_multiaddr; - __be32 imsf_interface; - __u32 imsf_fmode; - __u32 imsf_numsrc; - __be32 imsf_slist_flex[]; - }; + __be32 imsf_slist[1]; + __DECLARE_FLEX_ARRAY(__be32, imsf_slist_flex); }; }; diff --git a/include/uapi/linux/netfilter_decnet.h b/include/uapi/linux/netfilter_decnet.h deleted file mode 100644 index 3c77f54560f2..000000000000 --- a/include/uapi/linux/netfilter_decnet.h +++ /dev/null @@ -1,72 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef __LINUX_DECNET_NETFILTER_H -#define __LINUX_DECNET_NETFILTER_H - -/* DECnet-specific defines for netfilter. - * This file (C) Steve Whitehouse 1999 derived from the - * ipv4 netfilter header file which is - * (C)1998 Rusty Russell -- This code is GPL. - */ - -#include <linux/netfilter.h> - -/* only for userspace compatibility */ -#ifndef __KERNEL__ - -#include <limits.h> /* for INT_MIN, INT_MAX */ - -/* kernel define is in netfilter_defs.h */ -#define NF_DN_NUMHOOKS 7 -#endif /* ! __KERNEL__ */ - -/* DECnet Hooks */ -/* After promisc drops, checksum checks. */ -#define NF_DN_PRE_ROUTING 0 -/* If the packet is destined for this box. */ -#define NF_DN_LOCAL_IN 1 -/* If the packet is destined for another interface. */ -#define NF_DN_FORWARD 2 -/* Packets coming from a local process. */ -#define NF_DN_LOCAL_OUT 3 -/* Packets about to hit the wire. */ -#define NF_DN_POST_ROUTING 4 -/* Input Hello Packets */ -#define NF_DN_HELLO 5 -/* Input Routing Packets */ -#define NF_DN_ROUTE 6 - -enum nf_dn_hook_priorities { - NF_DN_PRI_FIRST = INT_MIN, - NF_DN_PRI_CONNTRACK = -200, - NF_DN_PRI_MANGLE = -150, - NF_DN_PRI_NAT_DST = -100, - NF_DN_PRI_FILTER = 0, - NF_DN_PRI_NAT_SRC = 100, - NF_DN_PRI_DNRTMSG = 200, - NF_DN_PRI_LAST = INT_MAX, -}; - -struct nf_dn_rtmsg { - int nfdn_ifindex; -}; - -#define NFDN_RTMSG(r) ((unsigned char *)(r) + NLMSG_ALIGN(sizeof(struct nf_dn_rtmsg))) - -#ifndef __KERNEL__ -/* backwards compatibility for userspace */ -#define DNRMG_L1_GROUP 0x01 -#define DNRMG_L2_GROUP 0x02 -#endif - -enum { - DNRNG_NLGRP_NONE, -#define DNRNG_NLGRP_NONE DNRNG_NLGRP_NONE - DNRNG_NLGRP_L1, -#define DNRNG_NLGRP_L1 DNRNG_NLGRP_L1 - DNRNG_NLGRP_L2, -#define DNRNG_NLGRP_L2 DNRNG_NLGRP_L2 - __DNRNG_NLGRP_MAX -}; -#define DNRNG_NLGRP_MAX (__DNRNG_NLGRP_MAX - 1) - -#endif /*__LINUX_DECNET_NETFILTER_H*/ diff --git a/include/uapi/linux/netlink.h b/include/uapi/linux/netlink.h index 855dffb4c1c3..e0689dbd2cde 100644 --- a/include/uapi/linux/netlink.h +++ b/include/uapi/linux/netlink.h @@ -20,7 +20,7 @@ #define NETLINK_CONNECTOR 11 #define NETLINK_NETFILTER 12 /* netfilter subsystem */ #define NETLINK_IP6_FW 13 -#define NETLINK_DNRTMSG 14 /* DECnet routing messages */ +#define NETLINK_DNRTMSG 14 /* DECnet routing messages (obsolete) */ #define NETLINK_KOBJECT_UEVENT 15 /* Kernel messages to userspace */ #define NETLINK_GENERIC 16 /* leave room for NETLINK_DM (DM Events) */ @@ -41,12 +41,20 @@ struct sockaddr_nl { __u32 nl_groups; /* multicast groups mask */ }; +/** + * struct nlmsghdr - fixed format metadata header of Netlink messages + * @nlmsg_len: Length of message including header + * @nlmsg_type: Message content type + * @nlmsg_flags: Additional flags + * @nlmsg_seq: Sequence number + * @nlmsg_pid: Sending process port ID + */ struct nlmsghdr { - __u32 nlmsg_len; /* Length of message including header */ - __u16 nlmsg_type; /* Message content */ - __u16 nlmsg_flags; /* Additional flags */ - __u32 nlmsg_seq; /* Sequence number */ - __u32 nlmsg_pid; /* Sending process port ID */ + __u32 nlmsg_len; + __u16 nlmsg_type; + __u16 nlmsg_flags; + __u32 nlmsg_seq; + __u32 nlmsg_pid; }; /* Flags values */ @@ -132,6 +140,10 @@ struct nlmsgerr { * be used - in the success case - to identify a created * object or operation or similar (binary) * @NLMSGERR_ATTR_POLICY: policy for a rejected attribute + * @NLMSGERR_ATTR_MISS_TYPE: type of a missing required attribute, + * %NLMSGERR_ATTR_MISS_NEST will not be present if the attribute was + * missing at the message level + * @NLMSGERR_ATTR_MISS_NEST: offset of the nest where attribute was missing * @__NLMSGERR_ATTR_MAX: number of attributes * @NLMSGERR_ATTR_MAX: highest attribute number */ @@ -141,6 +153,8 @@ enum nlmsgerr_attrs { NLMSGERR_ATTR_OFFS, NLMSGERR_ATTR_COOKIE, NLMSGERR_ATTR_POLICY, + NLMSGERR_ATTR_MISS_TYPE, + NLMSGERR_ATTR_MISS_NEST, __NLMSGERR_ATTR_MAX, NLMSGERR_ATTR_MAX = __NLMSGERR_ATTR_MAX - 1 @@ -337,6 +351,9 @@ enum netlink_attribute_type { * bitfield32 type (U32) * @NL_POLICY_TYPE_ATTR_MASK: mask of valid bits for unsigned integers (U64) * @NL_POLICY_TYPE_ATTR_PAD: pad attribute for 64-bit alignment + * + * @__NL_POLICY_TYPE_ATTR_MAX: number of attributes + * @NL_POLICY_TYPE_ATTR_MAX: highest attribute number */ enum netlink_policy_type_attr { NL_POLICY_TYPE_ATTR_UNSPEC, diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index ffb7c573e299..c32e7616a366 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -377,14 +377,22 @@ * the non-transmitting interfaces are deleted as well. * * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified - * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. + * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. %NL80211_ATTR_MAC + * represents peer's MLD address for MLO pairwise key. For MLO group key, + * the link is identified by %NL80211_ATTR_MLO_LINK_ID. * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT, * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD. + * For MLO connection, the link to set default key is identified by + * %NL80211_ATTR_MLO_LINK_ID. * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA, * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER, - * and %NL80211_ATTR_KEY_SEQ attributes. + * and %NL80211_ATTR_KEY_SEQ attributes. %NL80211_ATTR_MAC represents + * peer's MLD address for MLO pairwise key. The link to add MLO + * group key is identified by %NL80211_ATTR_MLO_LINK_ID. * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX - * or %NL80211_ATTR_MAC. + * or %NL80211_ATTR_MAC. %NL80211_ATTR_MAC represents peer's MLD address + * for MLO pairwise key. The link to delete group key is identified by + * %NL80211_ATTR_MLO_LINK_ID. * * @NL80211_CMD_GET_BEACON: (not used) * @NL80211_CMD_SET_BEACON: change the beacon on an access point interface @@ -4951,6 +4959,7 @@ enum nl80211_bss_scan_width { * using the nesting index as the antenna number. * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz * @NL80211_BSS_MLO_LINK_ID: MLO link ID of the BSS (u8). + * @NL80211_BSS_MLD_ADDR: MLD address of this BSS if connected to it. * @__NL80211_BSS_AFTER_LAST: internal * @NL80211_BSS_MAX: highest BSS attribute */ @@ -4977,6 +4986,7 @@ enum nl80211_bss { NL80211_BSS_CHAIN_SIGNAL, NL80211_BSS_FREQUENCY_OFFSET, NL80211_BSS_MLO_LINK_ID, + NL80211_BSS_MLD_ADDR, /* keep last */ __NL80211_BSS_AFTER_LAST, @@ -6273,6 +6283,14 @@ enum nl80211_feature_flags { * @NL80211_EXT_FEATURE_RADAR_BACKGROUND: Device supports background radar/CAC * detection. * + * @NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE: Device can perform a MAC address + * change without having to bring the underlying network device down + * first. For example, in station mode this can be used to vary the + * origin MAC address prior to a connection to a new AP for privacy + * or other reasons. Note that certain driver specific restrictions + * might apply, e.g. no scans in progress, no offchannel operations + * in progress, and no active connections. + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -6340,6 +6358,7 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_BSS_COLOR, NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD, NL80211_EXT_FEATURE_RADAR_BACKGROUND, + NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, diff --git a/include/uapi/linux/openvswitch.h b/include/uapi/linux/openvswitch.h index ce3e1738d427..94066f87e9ee 100644 --- a/include/uapi/linux/openvswitch.h +++ b/include/uapi/linux/openvswitch.h @@ -76,6 +76,8 @@ enum ovs_datapath_cmd { * datapath. Always present in notifications. * @OVS_DP_ATTR_MEGAFLOW_STATS: Statistics about mega flow masks usage for the * datapath. Always present in notifications. + * @OVS_DP_ATTR_IFINDEX: Interface index for a new datapath netdev. Only + * valid for %OVS_DP_CMD_NEW requests. * * These attributes follow the &struct ovs_header within the Generic Netlink * payload for %OVS_DP_* commands. @@ -92,6 +94,7 @@ enum ovs_datapath_attr { OVS_DP_ATTR_PER_CPU_PIDS, /* Netlink PIDS to receive upcalls in * per-cpu dispatch mode */ + OVS_DP_ATTR_IFINDEX, __OVS_DP_ATTR_MAX }; |