6 files changed, 18 insertions, 38 deletions
diff --git a/include/uapi/linux/blkpg.h b/include/uapi/linux/blkpg.h
index ac6474e4f29d..d0a64ee97c6d 100644
--- a/include/uapi/linux/blkpg.h
+++ b/include/uapi/linux/blkpg.h
@@ -2,29 +2,6 @@
 #ifndef _UAPI__LINUX_BLKPG_H
 #define _UAPI__LINUX_BLKPG_H
 
-/*
- * Partition table and disk geometry handling
- *
- * A single ioctl with lots of subfunctions:
- *
- * Device number stuff:
- *    get_whole_disk()		(given the device number of a partition,
- *                               find the device number of the encompassing disk)
- *    get_all_partitions()	(given the device number of a disk, return the
- *				 device numbers of all its known partitions)
- *
- * Partition stuff:
- *    add_partition()
- *    delete_partition()
- *    test_partition_in_use()	(also for test_disk_in_use)
- *
- * Geometry stuff:
- *    get_geometry()
- *    set_geometry()
- *    get_bios_drivedata()
- *
- * For today, only the partition stuff - aeb, 990515
- */
 #include <linux/compiler.h>
 #include <linux/ioctl.h>
 
@@ -52,9 +29,8 @@ struct blkpg_partition {
 	long long start;		/* starting offset in bytes */
 	long long length;		/* length in bytes */
 	int pno;			/* partition number */
-	char devname[BLKPG_DEVNAMELTH];	/* partition name, like sda5 or c0d1p2,
-					   to be used in kernel messages */
-	char volname[BLKPG_VOLNAMELTH];	/* volume label */
+	char devname[BLKPG_DEVNAMELTH];	/* unused / ignored */
+	char volname[BLKPG_VOLNAMELTH];	/* unused / ignore */
 };
 
 #endif /* _UAPI__LINUX_BLKPG_H */
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 4c24daa43bac..4ba4ef0ff63a 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -3850,8 +3850,7 @@ union bpf_attr {
  *
  * long bpf_check_mtu(void *ctx, u32 ifindex, u32 *mtu_len, s32 len_diff, u64 flags)
  *	Description
-
- *		Check ctx packet size against exceeding MTU of net device (based
+ *		Check packet size against exceeding MTU of net device (based
  *		on *ifindex*).  This helper will likely be used in combination
  *		with helpers that adjust/change the packet size.
  *
@@ -3868,6 +3867,14 @@ union bpf_attr {
  *		against the current net device.  This is practical if this isn't
  *		used prior to redirect.
  *
+ *		On input *mtu_len* must be a valid pointer, else verifier will
+ *		reject BPF program.  If the value *mtu_len* is initialized to
+ *		zero then the ctx packet size is use.  When value *mtu_len* is
+ *		provided as input this specify the L3 length that the MTU check
+ *		is done against. Remember XDP and TC length operate at L2, but
+ *		this value is L3 as this correlate to MTU and IP-header tot_len
+ *		values which are L3 (similar behavior as bpf_fib_lookup).
+ *
  *		The Linux kernel route table can configure MTUs on a more
  *		specific per route level, which is not provided by this helper.
  *		For route level MTU checks use the **bpf_fib_lookup**\ ()
@@ -3892,11 +3899,9 @@ union bpf_attr {
  *
  *		On return *mtu_len* pointer contains the MTU value of the net
  *		device.  Remember the net device configured MTU is the L3 size,
- *		which is returned here and XDP and TX length operate at L2.
+ *		which is returned here and XDP and TC length operate at L2.
  *		Helper take this into account for you, but remember when using
- *		MTU value in your BPF-code.  On input *mtu_len* must be a valid
- *		pointer and be initialized (to zero), else verifier will reject
- *		BPF program.
+ *		MTU value in your BPF-code.
  *
  *	Return
  *		* 0 on success, and populate MTU value in *mtu_len* pointer.
diff --git a/include/uapi/linux/fuse.h b/include/uapi/linux/fuse.h
index 98ca64d1beb6..54442612c48b 100644
--- a/include/uapi/linux/fuse.h
+++ b/include/uapi/linux/fuse.h
@@ -903,7 +903,8 @@ struct fuse_notify_retrieve_in {
 };
 
 /* Device ioctls: */
-#define FUSE_DEV_IOC_CLONE	_IOR(229, 0, uint32_t)
+#define FUSE_DEV_IOC_MAGIC		229
+#define FUSE_DEV_IOC_CLONE		_IOR(FUSE_DEV_IOC_MAGIC, 0, uint32_t)
 
 struct fuse_lseek_in {
 	uint64_t	fh;
diff --git a/include/uapi/linux/l2tp.h b/include/uapi/linux/l2tp.h
index 30c80d5ba4bf..bab8c9708611 100644
--- a/include/uapi/linux/l2tp.h
+++ b/include/uapi/linux/l2tp.h
@@ -145,6 +145,7 @@ enum {
 	L2TP_ATTR_RX_ERRORS,		/* u64 */
 	L2TP_ATTR_STATS_PAD,
 	L2TP_ATTR_RX_COOKIE_DISCARDS,	/* u64 */
+	L2TP_ATTR_RX_INVALID,		/* u64 */
 	__L2TP_ATTR_STATS_MAX,
 };
 
diff --git a/include/uapi/linux/netfilter/nfnetlink_cthelper.h b/include/uapi/linux/netfilter/nfnetlink_cthelper.h
index a13137afc429..70af02092d16 100644
--- a/include/uapi/linux/netfilter/nfnetlink_cthelper.h
+++ b/include/uapi/linux/netfilter/nfnetlink_cthelper.h
@@ -5,7 +5,7 @@
 #define NFCT_HELPER_STATUS_DISABLED	0
 #define NFCT_HELPER_STATUS_ENABLED	1
 
-enum nfnl_acct_msg_types {
+enum nfnl_cthelper_msg_types {
 	NFNL_MSG_CTHELPER_NEW,
 	NFNL_MSG_CTHELPER_GET,
 	NFNL_MSG_CTHELPER_DEL,
diff --git a/include/uapi/linux/psample.h b/include/uapi/linux/psample.h
index aea26ab1431c..bff5032c98df 100644
--- a/include/uapi/linux/psample.h
+++ b/include/uapi/linux/psample.h
@@ -3,7 +3,6 @@
 #define __UAPI_PSAMPLE_H
 
 enum {
-	/* sampled packet metadata */
 	PSAMPLE_ATTR_IIFINDEX,
 	PSAMPLE_ATTR_OIFINDEX,
 	PSAMPLE_ATTR_ORIGSIZE,
@@ -11,10 +10,8 @@ enum {
 	PSAMPLE_ATTR_GROUP_SEQ,
 	PSAMPLE_ATTR_SAMPLE_RATE,
 	PSAMPLE_ATTR_DATA,
-	PSAMPLE_ATTR_TUNNEL,
-
-	/* commands attributes */
 	PSAMPLE_ATTR_GROUP_REFCOUNT,
+	PSAMPLE_ATTR_TUNNEL,
 
 	__PSAMPLE_ATTR_MAX
 };