diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/console_struct.h | 6 | ||||
| -rw-r--r-- | include/linux/consolemap.h | 60 | ||||
| -rw-r--r-- | include/linux/serial.h | 15 | ||||
| -rw-r--r-- | include/linux/serial_8250.h | 7 | ||||
| -rw-r--r-- | include/linux/serial_core.h | 364 | ||||
| -rw-r--r-- | include/linux/serial_s3c.h | 2 | ||||
| -rw-r--r-- | include/linux/tty_buffer.h | 1 | ||||
| -rw-r--r-- | include/linux/tty_ldisc.h | 14 | ||||
| -rw-r--r-- | include/linux/tty_port.h | 2 | ||||
| -rw-r--r-- | include/uapi/asm-generic/termbits-common.h | 1 | ||||
| -rw-r--r-- | include/uapi/linux/serial.h | 20 | ||||
| -rw-r--r-- | include/uapi/linux/serial_core.h | 4 | ||||
| -rw-r--r-- | include/uapi/linux/serial_reg.h | 4 |
13 files changed, 444 insertions, 56 deletions
diff --git a/include/linux/console_struct.h b/include/linux/console_struct.h index d5b9c8d40c18..1518568aaf0f 100644 --- a/include/linux/console_struct.h +++ b/include/linux/console_struct.h @@ -17,7 +17,7 @@ #include <linux/vt.h> #include <linux/workqueue.h> -struct uni_pagedir; +struct uni_pagedict; struct uni_screen; #define NPAR 16 @@ -157,8 +157,8 @@ struct vc_data { unsigned int vc_bell_duration; /* Console bell duration */ unsigned short vc_cur_blink_ms; /* Cursor blink duration */ struct vc_data **vc_display_fg; /* [!] Ptr to var holding fg console for this display */ - struct uni_pagedir *vc_uni_pagedir; - struct uni_pagedir **vc_uni_pagedir_loc; /* [!] Location of uni_pagedir variable for this console */ + struct uni_pagedict *uni_pagedict; + struct uni_pagedict **uni_pagedict_loc; /* [!] Location of uni_pagedict variable for this console */ struct uni_screen *vc_uni_screen; /* unicode screen content */ /* additional information is in vt_kern.h */ }; diff --git a/include/linux/consolemap.h b/include/linux/consolemap.h index bcfce748c9d8..c35db4896c37 100644 --- a/include/linux/consolemap.h +++ b/include/linux/consolemap.h @@ -7,30 +7,56 @@ #ifndef __LINUX_CONSOLEMAP_H__ #define __LINUX_CONSOLEMAP_H__ -#define LAT1_MAP 0 -#define GRAF_MAP 1 -#define IBMPC_MAP 2 -#define USER_MAP 3 +enum translation_map { + LAT1_MAP, + GRAF_MAP, + IBMPC_MAP, + USER_MAP, + + FIRST_MAP = LAT1_MAP, + LAST_MAP = USER_MAP, +}; #include <linux/types.h> -#ifdef CONFIG_CONSOLE_TRANSLATIONS struct vc_data; -extern u16 inverse_translate(const struct vc_data *conp, int glyph, - int use_unicode); -extern unsigned short *set_translate(int m, struct vc_data *vc); -extern int conv_uni_to_pc(struct vc_data *conp, long ucs); -extern u32 conv_8bit_to_uni(unsigned char c); -extern int conv_uni_to_8bit(u32 uni); +#ifdef CONFIG_CONSOLE_TRANSLATIONS +u16 inverse_translate(const struct vc_data *conp, u16 glyph, bool use_unicode); +unsigned short *set_translate(enum translation_map m, struct vc_data *vc); +int conv_uni_to_pc(struct vc_data *conp, long ucs); +u32 conv_8bit_to_uni(unsigned char c); +int conv_uni_to_8bit(u32 uni); void console_map_init(void); #else -#define inverse_translate(conp, glyph, uni) ((uint16_t)glyph) -#define set_translate(m, vc) ((unsigned short *)NULL) -#define conv_uni_to_pc(conp, ucs) ((int) (ucs > 0xff ? -1: ucs)) -#define conv_8bit_to_uni(c) ((uint32_t)(c)) -#define conv_uni_to_8bit(c) ((int) ((c) & 0xff)) -#define console_map_init(c) do { ; } while (0) +static inline u16 inverse_translate(const struct vc_data *conp, u16 glyph, + bool use_unicode) +{ + return glyph; +} + +static inline unsigned short *set_translate(enum translation_map m, + struct vc_data *vc) +{ + return NULL; +} + +static inline int conv_uni_to_pc(struct vc_data *conp, long ucs) +{ + return ucs > 0xff ? -1 : ucs; +} + +static inline u32 conv_8bit_to_uni(unsigned char c) +{ + return c; +} + +static inline int conv_uni_to_8bit(u32 uni) +{ + return uni & 0xff; +} + +static inline void console_map_init(void) { } #endif /* CONFIG_CONSOLE_TRANSLATIONS */ #endif /* __LINUX_CONSOLEMAP_H__ */ diff --git a/include/linux/serial.h b/include/linux/serial.h index 0b8b7d7c8f33..3d6fe3ef92cf 100644 --- a/include/linux/serial.h +++ b/include/linux/serial.h @@ -9,12 +9,20 @@ #ifndef _LINUX_SERIAL_H #define _LINUX_SERIAL_H -#include <asm/page.h> #include <uapi/linux/serial.h> +#include <uapi/linux/serial_reg.h> /* Helper for dealing with UART_LCR_WLEN* defines */ #define UART_LCR_WLEN(x) ((x) - 5) +/* FIFO and shifting register empty */ +#define UART_LSR_BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +static inline bool uart_lsr_tx_empty(u16 lsr) +{ + return (lsr & UART_LSR_BOTH_EMPTY) == UART_LSR_BOTH_EMPTY; +} + /* * Counters of the input lines (CTS, DSR, RI, CD) interrupts */ @@ -25,11 +33,6 @@ struct async_icount { __u32 buf_overrun; }; -/* - * The size of the serial xmit buffer is 1 page, or 4096 bytes - */ -#define SERIAL_XMIT_SIZE PAGE_SIZE - #include <linux/compiler.h> #endif /* _LINUX_SERIAL_H */ diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index ff84a3ed10ea..8c7b793aa4d7 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -119,7 +119,8 @@ struct uart_8250_port { * be immediately processed. */ #define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS - unsigned char lsr_saved_flags; + u16 lsr_saved_flags; + u16 lsr_save_mask; #define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA unsigned char msr_saved_flags; @@ -170,8 +171,8 @@ extern void serial8250_do_set_divisor(struct uart_port *port, unsigned int baud, unsigned int quot_frac); extern int fsl8250_handle_irq(struct uart_port *port); int serial8250_handle_irq(struct uart_port *port, unsigned int iir); -unsigned char serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr); -void serial8250_read_char(struct uart_8250_port *up, unsigned char lsr); +u16 serial8250_rx_chars(struct uart_8250_port *up, u16 lsr); +void serial8250_read_char(struct uart_8250_port *up, u16 lsr); void serial8250_tx_chars(struct uart_8250_port *up); unsigned int serial8250_modem_status(struct uart_8250_port *up); void serial8250_init_port(struct uart_8250_port *up); diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index fde258b3decd..aef3145f2032 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -31,9 +31,336 @@ struct serial_struct; struct device; struct gpio_desc; -/* +/** + * struct uart_ops -- interface between serial_core and the driver + * * This structure describes all the operations that can be done on the - * physical hardware. See Documentation/driver-api/serial/driver.rst for details. + * physical hardware. + * + * @tx_empty: ``unsigned int ()(struct uart_port *port)`` + * + * This function tests whether the transmitter fifo and shifter for the + * @port is empty. If it is empty, this function should return + * %TIOCSER_TEMT, otherwise return 0. If the port does not support this + * operation, then it should return %TIOCSER_TEMT. + * + * Locking: none. + * Interrupts: caller dependent. + * This call must not sleep + * + * @set_mctrl: ``void ()(struct uart_port *port, unsigned int mctrl)`` + * + * This function sets the modem control lines for @port to the state + * described by @mctrl. The relevant bits of @mctrl are: + * + * - %TIOCM_RTS RTS signal. + * - %TIOCM_DTR DTR signal. + * - %TIOCM_OUT1 OUT1 signal. + * - %TIOCM_OUT2 OUT2 signal. + * - %TIOCM_LOOP Set the port into loopback mode. + * + * If the appropriate bit is set, the signal should be driven + * active. If the bit is clear, the signal should be driven + * inactive. + * + * Locking: @port->lock taken. + * Interrupts: locally disabled. + * This call must not sleep + * + * @get_mctrl: ``unsigned int ()(struct uart_port *port)`` + * + * Returns the current state of modem control inputs of @port. The state + * of the outputs should not be returned, since the core keeps track of + * their state. The state information should include: + * + * - %TIOCM_CAR state of DCD signal + * - %TIOCM_CTS state of CTS signal + * - %TIOCM_DSR state of DSR signal + * - %TIOCM_RI state of RI signal + * + * The bit is set if the signal is currently driven active. If + * the port does not support CTS, DCD or DSR, the driver should + * indicate that the signal is permanently active. If RI is + * not available, the signal should not be indicated as active. + * + * Locking: @port->lock taken. + * Interrupts: locally disabled. + * This call must not sleep + * + * @stop_tx: ``void ()(struct uart_port *port)`` + * + * Stop transmitting characters. This might be due to the CTS line + * becoming inactive or the tty layer indicating we want to stop + * transmission due to an %XOFF character. + * + * The driver should stop transmitting characters as soon as possible. + * + * Locking: @port->lock taken. + * Interrupts: locally disabled. + * This call must not sleep + * + * @start_tx: ``void ()(struct uart_port *port)`` + * + * Start transmitting characters. + * + * Locking: @port->lock taken. + * Interrupts: locally disabled. + * This call must not sleep + * + * @throttle: ``void ()(struct uart_port *port)`` + * + * Notify the serial driver that input buffers for the line discipline are + * close to full, and it should somehow signal that no more characters + * should be sent to the serial port. + * This will be called only if hardware assisted flow control is enabled. + * + * Locking: serialized with @unthrottle() and termios modification by the + * tty layer. + * + * @unthrottle: ``void ()(struct uart_port *port)`` + * + * Notify the serial driver that characters can now be sent to the serial + * port without fear of overrunning the input buffers of the line + * disciplines. + * + * This will be called only if hardware assisted flow control is enabled. + * + * Locking: serialized with @throttle() and termios modification by the + * tty layer. + * + * @send_xchar: ``void ()(struct uart_port *port, char ch)`` + * + * Transmit a high priority character, even if the port is stopped. This + * is used to implement XON/XOFF flow control and tcflow(). If the serial + * driver does not implement this function, the tty core will append the + * character to the circular buffer and then call start_tx() / stop_tx() + * to flush the data out. + * + * Do not transmit if @ch == '\0' (%__DISABLED_CHAR). + * + * Locking: none. + * Interrupts: caller dependent. + * + * @stop_rx: ``void ()(struct uart_port *port)`` + * + * Stop receiving characters; the @port is in the process of being closed. + * + * Locking: @port->lock taken. + * Interrupts: locally disabled. + * This call must not sleep + * + * @enable_ms: ``void ()(struct uart_port *port)`` + * + * Enable the modem status interrupts. + * + * This method may be called multiple times. Modem status interrupts + * should be disabled when the @shutdown() method is called. + * + * Locking: @port->lock taken. + * Interrupts: locally disabled. + * This call must not sleep + * + * @break_ctl: ``void ()(struct uart_port *port, int ctl)`` + * + * Control the transmission of a break signal. If @ctl is nonzero, the + * break signal should be transmitted. The signal should be terminated + * when another call is made with a zero @ctl. + * + * Locking: caller holds tty_port->mutex + * + * @startup: ``int ()(struct uart_port *port)`` + * + * Grab any interrupt resources and initialise any low level driver state. + * Enable the port for reception. It should not activate RTS nor DTR; + * this will be done via a separate call to @set_mctrl(). + * + * This method will only be called when the port is initially opened. + * + * Locking: port_sem taken. + * Interrupts: globally disabled. + * + * @shutdown: ``void ()(struct uart_port *port)`` + * + * Disable the @port, disable any break condition that may be in effect, + * and free any interrupt resources. It should not disable RTS nor DTR; + * this will have already been done via a separate call to @set_mctrl(). + * + * Drivers must not access @port->state once this call has completed. + * + * This method will only be called when there are no more users of this + * @port. + * + * Locking: port_sem taken. + * Interrupts: caller dependent. + * + * @flush_buffer: ``void ()(struct uart_port *port)`` + * + * Flush any write buffers, reset any DMA state and stop any ongoing DMA + * transfers. + * + * This will be called whenever the @port->state->xmit circular buffer is + * cleared. + * + * Locking: @port->lock taken. + * Interrupts: locally disabled. + * This call must not sleep + * + * @set_termios: ``void ()(struct uart_port *port, struct ktermios *new, + * struct ktermios *old)`` + * + * Change the @port parameters, including word length, parity, stop bits. + * Update @port->read_status_mask and @port->ignore_status_mask to + * indicate the types of events we are interested in receiving. Relevant + * ktermios::c_cflag bits are: + * + * - %CSIZE - word size + * - %CSTOPB - 2 stop bits + * - %PARENB - parity enable + * - %PARODD - odd parity (when %PARENB is in force) + * - %ADDRB - address bit (changed through uart_port::rs485_config()). + * - %CREAD - enable reception of characters (if not set, still receive + * characters from the port, but throw them away). + * - %CRTSCTS - if set, enable CTS status change reporting. + * - %CLOCAL - if not set, enable modem status change reporting. + * + * Relevant ktermios::c_iflag bits are: + * + * - %INPCK - enable frame and parity error events to be passed to the TTY + * layer. + * - %BRKINT / %PARMRK - both of these enable break events to be passed to + * the TTY layer. + * - %IGNPAR - ignore parity and framing errors. + * - %IGNBRK - ignore break errors. If %IGNPAR is also set, ignore overrun + * errors as well. + * + * The interaction of the ktermios::c_iflag bits is as follows (parity + * error given as an example): + * + * ============ ======= ======= ========================================= + * Parity error INPCK IGNPAR + * ============ ======= ======= ========================================= + * n/a 0 n/a character received, marked as %TTY_NORMAL + * None 1 n/a character received, marked as %TTY_NORMAL + * Yes 1 0 character received, marked as %TTY_PARITY + * Yes 1 1 character discarded + * ============ ======= ======= ========================================= + * + * Other flags may be used (eg, xon/xoff characters) if your hardware + * supports hardware "soft" flow control. + * + * Locking: caller holds tty_port->mutex + * Interrupts: caller dependent. + * This call must not sleep + * + * @set_ldisc: ``void ()(struct uart_port *port, struct ktermios *termios)`` + * + * Notifier for discipline change. See + * Documentation/driver-api/tty/tty_ldisc.rst. + * + * Locking: caller holds tty_port->mutex + * + * @pm: ``void ()(struct uart_port *port, unsigned int state, + * unsigned int oldstate)`` + * + * Perform any power management related activities on the specified @port. + * @state indicates the new state (defined by enum uart_pm_state), + * @oldstate indicates the previous state. + * + * This function should not be used to grab any resources. + * + * This will be called when the @port is initially opened and finally + * closed, except when the @port is also the system console. This will + * occur even if %CONFIG_PM is not set. + * + * Locking: none. + * Interrupts: caller dependent. + * + * @type: ``const char *()(struct uart_port *port)`` + * + * Return a pointer to a string constant describing the specified @port, + * or return %NULL, in which case the string 'unknown' is substituted. + * + * Locking: none. + * Interrupts: caller dependent. + * + * @release_port: ``void ()(struct uart_port *port)`` + * + * Release any memory and IO region resources currently in use by the + * @port. + * + * Locking: none. + * Interrupts: caller dependent. + * + * @request_port: ``int ()(struct uart_port *port)`` + * + * Request any memory and IO region resources required by the port. If any + * fail, no resources should be registered when this function returns, and + * it should return -%EBUSY on failure. + * + * Locking: none. + * Interrupts: caller dependent. + * + * @config_port: ``void ()(struct uart_port *port, int type)`` + * + * Perform any autoconfiguration steps required for the @port. @type + * contains a bit mask of the required configuration. %UART_CONFIG_TYPE + * indicates that the port requires detection and identification. + * @port->type should be set to the type found, or %PORT_UNKNOWN if no + * port was detected. + * + * %UART_CONFIG_IRQ indicates autoconfiguration of the interrupt signal, + * which should be probed using standard kernel autoprobing techniques. + * This is not necessary on platforms where ports have interrupts + * internally hard wired (eg, system on a chip implementations). + * + * Locking: none. + * Interrupts: caller dependent. + * + * @verify_port: ``int ()(struct uart_port *port, + * struct serial_struct *serinfo)`` + * + * Verify the new serial port information contained within @serinfo is + * suitable for this port type. + * + * Locking: none. + * Interrupts: caller dependent. + * + * @ioctl: ``int ()(struct uart_port *port, unsigned int cmd, + * unsigned long arg)`` + * + * Perform any port specific IOCTLs. IOCTL commands must be defined using + * the standard numbering system found in <asm/ioctl.h>. + * + * Locking: none. + * Interrupts: caller dependent. + * + * @poll_init: ``int ()(struct uart_port *port)`` + * + * Called by kgdb to perform the minimal hardware initialization needed to + * support @poll_put_char() and @poll_get_char(). Unlike @startup(), this + * should not request interrupts. + * + * Locking: %tty_mutex and tty_port->mutex taken. + * Interrupts: n/a. + * + * @poll_put_char: ``void ()(struct uart_port *port, unsigned char ch)`` + * + * Called by kgdb to write a single character @ch directly to the serial + * @port. It can and should block until there is space in the TX FIFO. + * + * Locking: none. + * Interrupts: caller dependent. + * This call must not sleep + * + * @poll_get_char: ``int ()(struct uart_port *port)`` + * + * Called by kgdb to read a single character directly from the serial + * port. If data is available, it should be returned; otherwise the + * function should return %NO_POLL_CHAR immediately. + * + * Locking: none. + * Interrupts: caller dependent. + * This call must not sleep */ struct uart_ops { unsigned int (*tx_empty)(struct uart_port *); @@ -56,22 +383,8 @@ struct uart_ops { void (*set_ldisc)(struct uart_port *, struct ktermios *); void (*pm)(struct uart_port *, unsigned int state, unsigned int oldstate); - - /* - * Return a string describing the type of the port - */ const char *(*type)(struct uart_port *); - - /* - * Release IO and memory resources used by the port. - * This includes iounmap if necessary. - */ void (*release_port)(struct uart_port *); - - /* - * Request IO and memory resources used by the port. - * This includes iomapping the port if necessary. - */ int (*request_port)(struct uart_port *); void (*config_port)(struct uart_port *, int); int (*verify_port)(struct uart_port *, struct serial_struct *); @@ -133,6 +446,7 @@ struct uart_port { unsigned int old); void (*handle_break)(struct uart_port *); int (*rs485_config)(struct uart_port *, + struct ktermios *termios, struct serial_rs485 *rs485); int (*iso7816_config)(struct uart_port *, struct serial_iso7816 *iso7816); @@ -232,7 +546,6 @@ struct uart_port { int hw_stopped; /* sw-assisted CTS flow state */ unsigned int mctrl; /* current modem ctrl settings */ - unsigned int timeout; /* character-based timeout */ unsigned int frame_time; /* frame timing in ns */ unsigned int type; /* port type */ const struct uart_ops *ops; @@ -255,6 +568,7 @@ struct uart_port { struct attribute_group *attr_group; /* port specific attributes */ const struct attribute_group **tty_groups; /* all attributes (serial core use only) */ struct serial_rs485 rs485; + struct serial_rs485 rs485_supported; /* Supported mask for serial_rs485 */ struct gpio_desc *rs485_term_gpio; /* enable RS485 bus termination */ struct serial_iso7816 iso7816; void *private_data; /* generic platform data pointer */ @@ -334,10 +648,23 @@ unsigned int uart_get_baud_rate(struct uart_port *port, struct ktermios *termios unsigned int max); unsigned int uart_get_divisor(struct uart_port *port, unsigned int baud); +/* + * Calculates FIFO drain time. + */ +static inline unsigned long uart_fifo_timeout(struct uart_port *port) +{ + u64 fifo_timeout = (u64)READ_ONCE(port->frame_time) * port->fifosize; + + /* Add .02 seconds of slop */ + fifo_timeout += 20 * NSEC_PER_MSEC; + + return max(nsecs_to_jiffies(fifo_timeout), 1UL); +} + /* Base timer interval for polling */ static inline int uart_poll_timeout(struct uart_port *port) { - int timeout = port->timeout; + int timeout = uart_fifo_timeout(port); return timeout > 6 ? (timeout / 2 - 2) : 1; } @@ -598,4 +925,5 @@ static inline int uart_handle_break(struct uart_port *port) !((cflag) & CLOCAL)) int uart_get_rs485_mode(struct uart_port *port); +int uart_rs485_config(struct uart_port *port); #endif /* LINUX_SERIAL_CORE_H */ diff --git a/include/linux/serial_s3c.h b/include/linux/serial_s3c.h index dec15f5b3dec..1672cf0810ef 100644 --- a/include/linux/serial_s3c.h +++ b/include/linux/serial_s3c.h @@ -83,7 +83,7 @@ #define S3C2410_UCON_RXIRQMODE (1<<0) #define S3C2410_UCON_RXFIFO_TOI (1<<7) #define S3C2443_UCON_RXERR_IRQEN (1<<6) -#define S3C2443_UCON_LOOPBACK (1<<5) +#define S3C2410_UCON_LOOPBACK (1<<5) #define S3C2410_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ diff --git a/include/linux/tty_buffer.h b/include/linux/tty_buffer.h index 3b9d77604291..1796648c2907 100644 --- a/include/linux/tty_buffer.h +++ b/include/linux/tty_buffer.h @@ -15,6 +15,7 @@ struct tty_buffer { int used; int size; int commit; + int lookahead; /* Lazy update on recv, can become less than "read" */ int read; int flags; /* Data points here */ diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h index e85002b56752..ede6f2157f32 100644 --- a/include/linux/tty_ldisc.h +++ b/include/linux/tty_ldisc.h @@ -186,6 +186,18 @@ int ldsem_down_write_nested(struct ld_semaphore *sem, int subclass, * indicate all data received is %TTY_NORMAL. If assigned, prefer this * function for automatic flow control. * + * @lookahead_buf: [DRV] ``void ()(struct tty_struct *tty, + * const unsigned char *cp, const char *fp, int count)`` + * + * This function is called by the low-level tty driver for characters + * not eaten by ->receive_buf() or ->receive_buf2(). It is useful for + * processing high-priority characters such as software flow-control + * characters that could otherwise get stuck into the intermediate + * buffer until tty has room to receive them. Ldisc must be able to + * handle later a ->receive_buf() or ->receive_buf2() call for the + * same characters (e.g. by skipping the actions for high-priority + * characters already handled by ->lookahead_buf()). + * * @owner: module containting this ldisc (for reference counting) * * This structure defines the interface between the tty line discipline @@ -229,6 +241,8 @@ struct tty_ldisc_ops { void (*dcd_change)(struct tty_struct *tty, unsigned int status); int (*receive_buf2)(struct tty_struct *tty, const unsigned char *cp, const char *fp, int count); + void (*lookahead_buf)(struct tty_struct *tty, const unsigned char *cp, + const unsigned char *fp, unsigned int count); struct module *owner; }; diff --git a/include/linux/tty_port.h b/include/linux/tty_port.h index 58e9619116b7..fa3c3bdaa234 100644 --- a/include/linux/tty_port.h +++ b/include/linux/tty_port.h @@ -40,6 +40,8 @@ struct tty_port_operations { struct tty_port_client_operations { int (*receive_buf)(struct tty_port *port, const unsigned char *, const unsigned char *, size_t); + void (*lookahead_buf)(struct tty_port *port, const unsigned char *cp, + const unsigned char *fp, unsigned int count); void (*write_wakeup)(struct tty_port *port); }; diff --git a/include/uapi/asm-generic/termbits-common.h b/include/uapi/asm-generic/termbits-common.h index 4d084fe8def5..4a6a79f28b21 100644 --- a/include/uapi/asm-generic/termbits-common.h +++ b/include/uapi/asm-generic/termbits-common.h @@ -46,6 +46,7 @@ typedef unsigned int speed_t; #define EXTA B19200 #define EXTB B38400 +#define ADDRB 0x20000000 /* address bit */ #define CMSPAR 0x40000000 /* mark or space (stick) parity */ #define CRTSCTS 0x80000000 /* flow control */ diff --git a/include/uapi/linux/serial.h b/include/uapi/linux/serial.h index fa6b16e5fdd8..cea06924b295 100644 --- a/include/uapi/linux/serial.h +++ b/include/uapi/linux/serial.h @@ -126,10 +126,26 @@ struct serial_rs485 { #define SER_RS485_TERMINATE_BUS (1 << 5) /* Enable bus termination (if supported) */ + +/* RS-485 addressing mode */ +#define SER_RS485_ADDRB (1 << 6) /* Enable addressing mode */ +#define SER_RS485_ADDR_RECV (1 << 7) /* Receive address filter */ +#define SER_RS485_ADDR_DEST (1 << 8) /* Destination address */ + __u32 delay_rts_before_send; /* Delay before send (milliseconds) */ __u32 delay_rts_after_send; /* Delay after send (milliseconds) */ - __u32 padding[5]; /* Memory is cheap, new structs - are a royal PITA .. */ + + /* The fields below are defined by flags */ + union { + __u32 padding[5]; /* Memory is cheap, new structs are a pain */ + + struct { + __u8 addr_recv; + __u8 addr_dest; + __u8 padding0[2]; + __u32 padding1[4]; + }; + }; }; /* diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 6faf502b7860..3ba34d8378bd 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -124,10 +124,6 @@ /* TXX9 type number */ #define PORT_TXX9 64 -/* NEC VR4100 series SIU/DSIU */ -#define PORT_VR41XX_SIU 65 -#define PORT_VR41XX_DSIU 66 - /* Samsung S3C2400 SoC */ #define PORT_S3C2400 67 diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h index f51bc8f36813..bab3b39266cc 100644 --- a/include/uapi/linux/serial_reg.h +++ b/include/uapi/linux/serial_reg.h @@ -139,7 +139,7 @@ #define UART_LSR_PE 0x04 /* Parity error indicator */ #define UART_LSR_OE 0x02 /* Overrun error indicator */ #define UART_LSR_DR 0x01 /* Receiver data ready */ -#define UART_LSR_BRK_ERROR_BITS 0x1E /* BI, FE, PE, OE bits */ +#define UART_LSR_BRK_ERROR_BITS (UART_LSR_BI|UART_LSR_FE|UART_LSR_PE|UART_LSR_OE) #define UART_MSR 6 /* In: Modem Status Register */ #define UART_MSR_DCD 0x80 /* Data Carrier Detect */ @@ -150,7 +150,7 @@ #define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ #define UART_MSR_DDSR 0x02 /* Delta DSR */ #define UART_MSR_DCTS 0x01 /* Delta CTS */ -#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ +#define UART_MSR_ANY_DELTA (UART_MSR_DDCD|UART_MSR_TERI|UART_MSR_DDSR|UART_MSR_DCTS) #define UART_SCR 7 /* I/O: Scratch Register */ |