diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/dt-bindings/power/meson-axg-power.h | 14 | ||||
| -rw-r--r-- | include/dt-bindings/reset/imx8mq-reset.h | 5 | ||||
| -rw-r--r-- | include/dt-bindings/reset/xlnx-versal-resets.h | 105 | ||||
| -rw-r--r-- | include/dt-bindings/soc/bcm6318-pm.h | 17 | ||||
| -rw-r--r-- | include/dt-bindings/soc/bcm63268-pm.h | 21 | ||||
| -rw-r--r-- | include/dt-bindings/soc/bcm6328-pm.h | 17 | ||||
| -rw-r--r-- | include/dt-bindings/soc/bcm6362-pm.h | 21 | ||||
| -rw-r--r-- | include/linux/mailbox/mtk-cmdq-mailbox.h | 6 | ||||
| -rw-r--r-- | include/linux/pruss_driver.h | 54 | ||||
| -rw-r--r-- | include/linux/qcom-geni-se.h | 4 | ||||
| -rw-r--r-- | include/linux/scmi_protocol.h | 32 | ||||
| -rw-r--r-- | include/linux/soc/mediatek/mtk-cmdq.h | 93 | ||||
| -rw-r--r-- | include/linux/tee_drv.h | 3 | ||||
| -rw-r--r-- | include/soc/fsl/qman.h | 4 | ||||
| -rw-r--r-- | include/soc/tegra/fuse.h | 3 | ||||
| -rw-r--r-- | include/uapi/linux/tee.h | 13 |
16 files changed, 396 insertions, 16 deletions
diff --git a/include/dt-bindings/power/meson-axg-power.h b/include/dt-bindings/power/meson-axg-power.h new file mode 100644 index 000000000000..e5243884b249 --- /dev/null +++ b/include/dt-bindings/power/meson-axg-power.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ +/* + * Copyright (c) 2020 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#ifndef _DT_BINDINGS_MESON_AXG_POWER_H +#define _DT_BINDINGS_MESON_AXG_POWER_H + +#define PWRC_AXG_VPU_ID 0 +#define PWRC_AXG_ETHERNET_MEM_ID 1 +#define PWRC_AXG_AUDIO_ID 2 + +#endif diff --git a/include/dt-bindings/reset/imx8mq-reset.h b/include/dt-bindings/reset/imx8mq-reset.h index a5b570737582..705870693ec2 100644 --- a/include/dt-bindings/reset/imx8mq-reset.h +++ b/include/dt-bindings/reset/imx8mq-reset.h @@ -58,7 +58,10 @@ #define IMX8MQ_RESET_DDRC2_PRST 47 /* i.MX8MM/i.MX8MN does NOT support */ #define IMX8MQ_RESET_DDRC2_CORE_RESET 48 /* i.MX8MM/i.MX8MN does NOT support */ #define IMX8MQ_RESET_DDRC2_PHY_RESET 49 /* i.MX8MM/i.MX8MN does NOT support */ +#define IMX8MQ_RESET_SW_M4C_RST 50 +#define IMX8MQ_RESET_SW_M4P_RST 51 +#define IMX8MQ_RESET_M4_ENABLE 52 -#define IMX8MQ_RESET_NUM 50 +#define IMX8MQ_RESET_NUM 53 #endif diff --git a/include/dt-bindings/reset/xlnx-versal-resets.h b/include/dt-bindings/reset/xlnx-versal-resets.h new file mode 100644 index 000000000000..895424e9b0e5 --- /dev/null +++ b/include/dt-bindings/reset/xlnx-versal-resets.h @@ -0,0 +1,105 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2020 Xilinx, Inc. + */ + +#ifndef _DT_BINDINGS_VERSAL_RESETS_H +#define _DT_BINDINGS_VERSAL_RESETS_H + +#define VERSAL_RST_PMC_POR (0xc30c001U) +#define VERSAL_RST_PMC (0xc410002U) +#define VERSAL_RST_PS_POR (0xc30c003U) +#define VERSAL_RST_PL_POR (0xc30c004U) +#define VERSAL_RST_NOC_POR (0xc30c005U) +#define VERSAL_RST_FPD_POR (0xc30c006U) +#define VERSAL_RST_ACPU_0_POR (0xc30c007U) +#define VERSAL_RST_ACPU_1_POR (0xc30c008U) +#define VERSAL_RST_OCM2_POR (0xc30c009U) +#define VERSAL_RST_PS_SRST (0xc41000aU) +#define VERSAL_RST_PL_SRST (0xc41000bU) +#define VERSAL_RST_NOC (0xc41000cU) +#define VERSAL_RST_NPI (0xc41000dU) +#define VERSAL_RST_SYS_RST_1 (0xc41000eU) +#define VERSAL_RST_SYS_RST_2 (0xc41000fU) +#define VERSAL_RST_SYS_RST_3 (0xc410010U) +#define VERSAL_RST_FPD (0xc410011U) +#define VERSAL_RST_PL0 (0xc410012U) +#define VERSAL_RST_PL1 (0xc410013U) +#define VERSAL_RST_PL2 (0xc410014U) +#define VERSAL_RST_PL3 (0xc410015U) +#define VERSAL_RST_APU (0xc410016U) +#define VERSAL_RST_ACPU_0 (0xc410017U) +#define VERSAL_RST_ACPU_1 (0xc410018U) +#define VERSAL_RST_ACPU_L2 (0xc410019U) +#define VERSAL_RST_ACPU_GIC (0xc41001aU) +#define VERSAL_RST_RPU_ISLAND (0xc41001bU) +#define VERSAL_RST_RPU_AMBA (0xc41001cU) +#define VERSAL_RST_R5_0 (0xc41001dU) +#define VERSAL_RST_R5_1 (0xc41001eU) +#define VERSAL_RST_SYSMON_PMC_SEQ_RST (0xc41001fU) +#define VERSAL_RST_SYSMON_PMC_CFG_RST (0xc410020U) +#define VERSAL_RST_SYSMON_FPD_CFG_RST (0xc410021U) +#define VERSAL_RST_SYSMON_FPD_SEQ_RST (0xc410022U) +#define VERSAL_RST_SYSMON_LPD (0xc410023U) +#define VERSAL_RST_PDMA_RST1 (0xc410024U) +#define VERSAL_RST_PDMA_RST0 (0xc410025U) +#define VERSAL_RST_ADMA (0xc410026U) +#define VERSAL_RST_TIMESTAMP (0xc410027U) +#define VERSAL_RST_OCM (0xc410028U) +#define VERSAL_RST_OCM2_RST (0xc410029U) +#define VERSAL_RST_IPI (0xc41002aU) +#define VERSAL_RST_SBI (0xc41002bU) +#define VERSAL_RST_LPD (0xc41002cU) +#define VERSAL_RST_QSPI (0xc10402dU) +#define VERSAL_RST_OSPI (0xc10402eU) +#define VERSAL_RST_SDIO_0 (0xc10402fU) +#define VERSAL_RST_SDIO_1 (0xc104030U) +#define VERSAL_RST_I2C_PMC (0xc104031U) +#define VERSAL_RST_GPIO_PMC (0xc104032U) +#define VERSAL_RST_GEM_0 (0xc104033U) +#define VERSAL_RST_GEM_1 (0xc104034U) +#define VERSAL_RST_SPARE (0xc104035U) +#define VERSAL_RST_USB_0 (0xc104036U) +#define VERSAL_RST_UART_0 (0xc104037U) +#define VERSAL_RST_UART_1 (0xc104038U) +#define VERSAL_RST_SPI_0 (0xc104039U) +#define VERSAL_RST_SPI_1 (0xc10403aU) +#define VERSAL_RST_CAN_FD_0 (0xc10403bU) +#define VERSAL_RST_CAN_FD_1 (0xc10403cU) +#define VERSAL_RST_I2C_0 (0xc10403dU) +#define VERSAL_RST_I2C_1 (0xc10403eU) +#define VERSAL_RST_GPIO_LPD (0xc10403fU) +#define VERSAL_RST_TTC_0 (0xc104040U) +#define VERSAL_RST_TTC_1 (0xc104041U) +#define VERSAL_RST_TTC_2 (0xc104042U) +#define VERSAL_RST_TTC_3 (0xc104043U) +#define VERSAL_RST_SWDT_FPD (0xc104044U) +#define VERSAL_RST_SWDT_LPD (0xc104045U) +#define VERSAL_RST_USB (0xc104046U) +#define VERSAL_RST_DPC (0xc208047U) +#define VERSAL_RST_PMCDBG (0xc208048U) +#define VERSAL_RST_DBG_TRACE (0xc208049U) +#define VERSAL_RST_DBG_FPD (0xc20804aU) +#define VERSAL_RST_DBG_TSTMP (0xc20804bU) +#define VERSAL_RST_RPU0_DBG (0xc20804cU) +#define VERSAL_RST_RPU1_DBG (0xc20804dU) +#define VERSAL_RST_HSDP (0xc20804eU) +#define VERSAL_RST_DBG_LPD (0xc20804fU) +#define VERSAL_RST_CPM_POR (0xc30c050U) +#define VERSAL_RST_CPM (0xc410051U) +#define VERSAL_RST_CPMDBG (0xc208052U) +#define VERSAL_RST_PCIE_CFG (0xc410053U) +#define VERSAL_RST_PCIE_CORE0 (0xc410054U) +#define VERSAL_RST_PCIE_CORE1 (0xc410055U) +#define VERSAL_RST_PCIE_DMA (0xc410056U) +#define VERSAL_RST_CMN (0xc410057U) +#define VERSAL_RST_L2_0 (0xc410058U) +#define VERSAL_RST_L2_1 (0xc410059U) +#define VERSAL_RST_ADDR_REMAP (0xc41005aU) +#define VERSAL_RST_CPI0 (0xc41005bU) +#define VERSAL_RST_CPI1 (0xc41005cU) +#define VERSAL_RST_XRAM (0xc30c05dU) +#define VERSAL_RST_AIE_ARRAY (0xc10405eU) +#define VERSAL_RST_AIE_SHIM (0xc10405fU) + +#endif diff --git a/include/dt-bindings/soc/bcm6318-pm.h b/include/dt-bindings/soc/bcm6318-pm.h new file mode 100644 index 000000000000..05931dce8333 --- /dev/null +++ b/include/dt-bindings/soc/bcm6318-pm.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef __DT_BINDINGS_BMIPS_BCM6318_PM_H +#define __DT_BINDINGS_BMIPS_BCM6318_PM_H + +#define BCM6318_POWER_DOMAIN_PCIE 0 +#define BCM6318_POWER_DOMAIN_USB 1 +#define BCM6318_POWER_DOMAIN_EPHY0 2 +#define BCM6318_POWER_DOMAIN_EPHY1 3 +#define BCM6318_POWER_DOMAIN_EPHY2 4 +#define BCM6318_POWER_DOMAIN_EPHY3 5 +#define BCM6318_POWER_DOMAIN_LDO2P5 6 +#define BCM6318_POWER_DOMAIN_LDO2P9 7 +#define BCM6318_POWER_DOMAIN_SW1P0 8 +#define BCM6318_POWER_DOMAIN_PAD 9 + +#endif /* __DT_BINDINGS_BMIPS_BCM6318_PM_H */ diff --git a/include/dt-bindings/soc/bcm63268-pm.h b/include/dt-bindings/soc/bcm63268-pm.h new file mode 100644 index 000000000000..84ded53a732f --- /dev/null +++ b/include/dt-bindings/soc/bcm63268-pm.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef __DT_BINDINGS_BMIPS_BCM63268_PM_H +#define __DT_BINDINGS_BMIPS_BCM63268_PM_H + +#define BCM63268_POWER_DOMAIN_SAR 0 +#define BCM63268_POWER_DOMAIN_IPSEC 1 +#define BCM63268_POWER_DOMAIN_MIPS 2 +#define BCM63268_POWER_DOMAIN_DECT 3 +#define BCM63268_POWER_DOMAIN_USBH 4 +#define BCM63268_POWER_DOMAIN_USBD 5 +#define BCM63268_POWER_DOMAIN_ROBOSW 6 +#define BCM63268_POWER_DOMAIN_PCM 7 +#define BCM63268_POWER_DOMAIN_PERIPH 8 +#define BCM63268_POWER_DOMAIN_VDSL_PHY 9 +#define BCM63268_POWER_DOMAIN_VDSL_MIPS 10 +#define BCM63268_POWER_DOMAIN_FAP 11 +#define BCM63268_POWER_DOMAIN_PCIE 12 +#define BCM63268_POWER_DOMAIN_WLAN_PADS 13 + +#endif /* __DT_BINDINGS_BMIPS_BCM63268_PM_H */ diff --git a/include/dt-bindings/soc/bcm6328-pm.h b/include/dt-bindings/soc/bcm6328-pm.h new file mode 100644 index 000000000000..557e1a69b7f7 --- /dev/null +++ b/include/dt-bindings/soc/bcm6328-pm.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef __DT_BINDINGS_BMIPS_BCM6328_PM_H +#define __DT_BINDINGS_BMIPS_BCM6328_PM_H + +#define BCM6328_POWER_DOMAIN_ADSL2_MIPS 0 +#define BCM6328_POWER_DOMAIN_ADSL2_PHY 1 +#define BCM6328_POWER_DOMAIN_ADSL2_AFE 2 +#define BCM6328_POWER_DOMAIN_SAR 3 +#define BCM6328_POWER_DOMAIN_PCM 4 +#define BCM6328_POWER_DOMAIN_USBD 5 +#define BCM6328_POWER_DOMAIN_USBH 6 +#define BCM6328_POWER_DOMAIN_PCIE 7 +#define BCM6328_POWER_DOMAIN_ROBOSW 8 +#define BCM6328_POWER_DOMAIN_EPHY 9 + +#endif /* __DT_BINDINGS_BMIPS_BCM6328_PM_H */ diff --git a/include/dt-bindings/soc/bcm6362-pm.h b/include/dt-bindings/soc/bcm6362-pm.h new file mode 100644 index 000000000000..d087ba63c7a1 --- /dev/null +++ b/include/dt-bindings/soc/bcm6362-pm.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ + +#ifndef __DT_BINDINGS_BMIPS_BCM6362_PM_H +#define __DT_BINDINGS_BMIPS_BCM6362_PM_H + +#define BCM6362_POWER_DOMAIN_SAR 0 +#define BCM6362_POWER_DOMAIN_IPSEC 1 +#define BCM6362_POWER_DOMAIN_MIPS 2 +#define BCM6362_POWER_DOMAIN_DECT 3 +#define BCM6362_POWER_DOMAIN_USBH 4 +#define BCM6362_POWER_DOMAIN_USBD 5 +#define BCM6362_POWER_DOMAIN_ROBOSW 6 +#define BCM6362_POWER_DOMAIN_PCM 7 +#define BCM6362_POWER_DOMAIN_PERIPH 8 +#define BCM6362_POWER_DOMAIN_ADSL_PHY 9 +#define BCM6362_POWER_DOMAIN_GMII_PADS 10 +#define BCM6362_POWER_DOMAIN_FAP 11 +#define BCM6362_POWER_DOMAIN_PCIE 12 +#define BCM6362_POWER_DOMAIN_WLAN_PADS 13 + +#endif /* __DT_BINDINGS_BMIPS_BCM6362_PM_H */ diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h index 05eea1aef5aa..d5a983d65f05 100644 --- a/include/linux/mailbox/mtk-cmdq-mailbox.h +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h @@ -28,8 +28,7 @@ * bit 16-27: update value * bit 31: 1 - update, 0 - no update */ -#define CMDQ_WFE_OPTION (CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | \ - CMDQ_WFE_WAIT_VALUE) +#define CMDQ_WFE_OPTION (CMDQ_WFE_WAIT | CMDQ_WFE_WAIT_VALUE) /** cmdq event maximum */ #define CMDQ_MAX_EVENT 0x3ff @@ -60,6 +59,9 @@ enum cmdq_code { CMDQ_CODE_JUMP = 0x10, CMDQ_CODE_WFE = 0x20, CMDQ_CODE_EOC = 0x40, + CMDQ_CODE_READ_S = 0x80, + CMDQ_CODE_WRITE_S = 0x90, + CMDQ_CODE_WRITE_S_MASK = 0x91, CMDQ_CODE_LOGIC = 0xa0, }; diff --git a/include/linux/pruss_driver.h b/include/linux/pruss_driver.h new file mode 100644 index 000000000000..ecfded30ed05 --- /dev/null +++ b/include/linux/pruss_driver.h @@ -0,0 +1,54 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * PRU-ICSS sub-system specific definitions + * + * Copyright (C) 2014-2020 Texas Instruments Incorporated - http://www.ti.com/ + * Suman Anna <s-anna@ti.com> + */ + +#ifndef _PRUSS_DRIVER_H_ +#define _PRUSS_DRIVER_H_ + +#include <linux/types.h> + +/* + * enum pruss_mem - PRUSS memory range identifiers + */ +enum pruss_mem { + PRUSS_MEM_DRAM0 = 0, + PRUSS_MEM_DRAM1, + PRUSS_MEM_SHRD_RAM2, + PRUSS_MEM_MAX, +}; + +/** + * struct pruss_mem_region - PRUSS memory region structure + * @va: kernel virtual address of the PRUSS memory region + * @pa: physical (bus) address of the PRUSS memory region + * @size: size of the PRUSS memory region + */ +struct pruss_mem_region { + void __iomem *va; + phys_addr_t pa; + size_t size; +}; + +/** + * struct pruss - PRUSS parent structure + * @dev: pruss device pointer + * @cfg_base: base iomap for CFG region + * @cfg_regmap: regmap for config region + * @mem_regions: data for each of the PRUSS memory regions + * @core_clk_mux: clk handle for PRUSS CORE_CLK_MUX + * @iep_clk_mux: clk handle for PRUSS IEP_CLK_MUX + */ +struct pruss { + struct device *dev; + void __iomem *cfg_base; + struct regmap *cfg_regmap; + struct pruss_mem_region mem_regions[PRUSS_MEM_MAX]; + struct clk *core_clk_mux; + struct clk *iep_clk_mux; +}; + +#endif /* _PRUSS_DRIVER_H_ */ diff --git a/include/linux/qcom-geni-se.h b/include/linux/qcom-geni-se.h index 1c31f26ccc7a..f7bbea3f09ca 100644 --- a/include/linux/qcom-geni-se.h +++ b/include/linux/qcom-geni-se.h @@ -299,7 +299,7 @@ static inline void geni_se_setup_m_cmd(struct geni_se *se, u32 cmd, u32 params) u32 m_cmd; m_cmd = (cmd << M_OPCODE_SHFT) | (params & M_PARAMS_MSK); - writel_relaxed(m_cmd, se->base + SE_GENI_M_CMD0); + writel(m_cmd, se->base + SE_GENI_M_CMD0); } /** @@ -319,7 +319,7 @@ static inline void geni_se_setup_s_cmd(struct geni_se *se, u32 cmd, u32 params) s_cmd &= ~(S_OPCODE_MSK | S_PARAMS_MSK); s_cmd |= (cmd << S_OPCODE_SHFT); s_cmd |= (params & S_PARAMS_MSK); - writel_relaxed(s_cmd, se->base + SE_GENI_S_CMD0); + writel(s_cmd, se->base + SE_GENI_S_CMD0); } /** diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h index 7e5dd7d1e221..9cd312a1ff92 100644 --- a/include/linux/scmi_protocol.h +++ b/include/linux/scmi_protocol.h @@ -279,12 +279,12 @@ struct scmi_notify_ops { struct scmi_handle { struct device *dev; struct scmi_revision_info *version; - struct scmi_perf_ops *perf_ops; - struct scmi_clk_ops *clk_ops; - struct scmi_power_ops *power_ops; - struct scmi_sensor_ops *sensor_ops; - struct scmi_reset_ops *reset_ops; - struct scmi_notify_ops *notify_ops; + const struct scmi_perf_ops *perf_ops; + const struct scmi_clk_ops *clk_ops; + const struct scmi_power_ops *power_ops; + const struct scmi_sensor_ops *sensor_ops; + const struct scmi_reset_ops *reset_ops; + const struct scmi_notify_ops *notify_ops; /* for protocol internal use */ void *perf_priv; void *clk_priv; @@ -292,6 +292,7 @@ struct scmi_handle { void *sensor_priv; void *reset_priv; void *notify_priv; + void *system_priv; }; enum scmi_std_protocol { @@ -304,6 +305,15 @@ enum scmi_std_protocol { SCMI_PROTOCOL_RESET = 0x16, }; +enum scmi_system_events { + SCMI_SYSTEM_SHUTDOWN, + SCMI_SYSTEM_COLDRESET, + SCMI_SYSTEM_WARMRESET, + SCMI_SYSTEM_POWERUP, + SCMI_SYSTEM_SUSPEND, + SCMI_SYSTEM_MAX +}; + struct scmi_device { u32 id; u8 protocol_id; @@ -335,7 +345,7 @@ struct scmi_driver { #define to_scmi_driver(d) container_of(d, struct scmi_driver, driver) -#ifdef CONFIG_ARM_SCMI_PROTOCOL +#if IS_REACHABLE(CONFIG_ARM_SCMI_PROTOCOL) int scmi_driver_register(struct scmi_driver *driver, struct module *owner, const char *mod_name); void scmi_driver_unregister(struct scmi_driver *driver); @@ -378,6 +388,7 @@ enum scmi_notification_events { SCMI_EVENT_SENSOR_TRIP_POINT_EVENT = 0x0, SCMI_EVENT_RESET_ISSUED = 0x0, SCMI_EVENT_BASE_ERROR_EVENT = 0x0, + SCMI_EVENT_SYSTEM_POWER_STATE_NOTIFIER = 0x0, }; struct scmi_power_state_changed_report { @@ -387,6 +398,13 @@ struct scmi_power_state_changed_report { unsigned int power_state; }; +struct scmi_system_power_state_notifier_report { + ktime_t timestamp; + unsigned int agent_id; + unsigned int flags; + unsigned int system_state; +}; + struct scmi_perf_limits_report { ktime_t timestamp; unsigned int agent_id; diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h index 2249ecaf77e4..960704d75994 100644 --- a/include/linux/soc/mediatek/mtk-cmdq.h +++ b/include/linux/soc/mediatek/mtk-cmdq.h @@ -12,6 +12,8 @@ #include <linux/timer.h> #define CMDQ_NO_TIMEOUT 0xffffffffu +#define CMDQ_ADDR_HIGH(addr) ((u32)(((addr) >> 16) & GENMASK(31, 0))) +#define CMDQ_ADDR_LOW(addr) ((u16)(addr) | BIT(1)) struct cmdq_pkt; @@ -102,14 +104,90 @@ int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value); int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value, u32 mask); +/* + * cmdq_pkt_read_s() - append read_s command to the CMDQ packet + * @pkt: the CMDQ packet + * @high_addr_reg_idx: internal register ID which contains high address of pa + * @addr_low: low address of pa + * @reg_idx: the CMDQ internal register ID to cache read data + * + * Return: 0 for success; else the error code is returned + */ +int cmdq_pkt_read_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, u16 addr_low, + u16 reg_idx); + +/** + * cmdq_pkt_write_s() - append write_s command to the CMDQ packet + * @pkt: the CMDQ packet + * @high_addr_reg_idx: internal register ID which contains high address of pa + * @addr_low: low address of pa + * @src_reg_idx: the CMDQ internal register ID which cache source value + * + * Return: 0 for success; else the error code is returned + * + * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH() + * to get high address and call cmdq_pkt_assign() to assign value into internal + * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameter when + * call to this function. + */ +int cmdq_pkt_write_s(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, + u16 addr_low, u16 src_reg_idx); + +/** + * cmdq_pkt_write_s_mask() - append write_s with mask command to the CMDQ packet + * @pkt: the CMDQ packet + * @high_addr_reg_idx: internal register ID which contains high address of pa + * @addr_low: low address of pa + * @src_reg_idx: the CMDQ internal register ID which cache source value + * @mask: the specified target address mask, use U32_MAX if no need + * + * Return: 0 for success; else the error code is returned + * + * Support write value to physical address without subsys. Use CMDQ_ADDR_HIGH() + * to get high address and call cmdq_pkt_assign() to assign value into internal + * reg. Also use CMDQ_ADDR_LOW() to get low address for addr_low parameter when + * call to this function. + */ +int cmdq_pkt_write_s_mask(struct cmdq_pkt *pkt, u16 high_addr_reg_idx, + u16 addr_low, u16 src_reg_idx, u32 mask); + +/** + * cmdq_pkt_write_s_value() - append write_s command to the CMDQ packet which + * write value to a physical address + * @pkt: the CMDQ packet + * @high_addr_reg_idx: internal register ID which contains high address of pa + * @addr_low: low address of pa + * @value: the specified target value + * + * Return: 0 for success; else the error code is returned + */ +int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx, + u16 addr_low, u32 value); + +/** + * cmdq_pkt_write_s_mask_value() - append write_s command with mask to the CMDQ + * packet which write value to a physical + * address + * @pkt: the CMDQ packet + * @high_addr_reg_idx: internal register ID which contains high address of pa + * @addr_low: low address of pa + * @value: the specified target value + * @mask: the specified target mask + * + * Return: 0 for success; else the error code is returned + */ +int cmdq_pkt_write_s_mask_value(struct cmdq_pkt *pkt, u8 high_addr_reg_idx, + u16 addr_low, u32 value, u32 mask); + /** * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet * @pkt: the CMDQ packet - * @event: the desired event type to "wait and CLEAR" + * @event: the desired event type to wait + * @clear: clear event or not after event arrive * * Return: 0 for success; else the error code is returned */ -int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event); +int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event, bool clear); /** * cmdq_pkt_clear_event() - append clear event command to the CMDQ packet @@ -176,6 +254,17 @@ int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys, int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value); /** + * cmdq_pkt_jump() - Append jump command to the CMDQ packet, ask GCE + * to execute an instruction that change current thread PC to + * a physical address which should contains more instruction. + * @pkt: the CMDQ packet + * @addr: physical address of target instruction buffer + * + * Return: 0 for success; else the error code is returned + */ +int cmdq_pkt_jump(struct cmdq_pkt *pkt, dma_addr_t addr); + +/** * cmdq_pkt_finalize() - Append EOC and jump command to pkt. * @pkt: the CMDQ packet * diff --git a/include/linux/tee_drv.h b/include/linux/tee_drv.h index d074302989dd..cdd049a724b1 100644 --- a/include/linux/tee_drv.h +++ b/include/linux/tee_drv.h @@ -47,6 +47,8 @@ struct tee_shm_pool; * and just return with an error code. It is needed for requests * that arises from TEE based kernel drivers that should be * non-blocking in nature. + * @cap_memref_null: flag indicating if the TEE Client support shared + * memory buffer with a NULL pointer. */ struct tee_context { struct tee_device *teedev; @@ -54,6 +56,7 @@ struct tee_context { struct kref refcount; bool releasing; bool supp_nowait; + bool cap_memref_null; }; struct tee_param_memref { diff --git a/include/soc/fsl/qman.h b/include/soc/fsl/qman.h index cfe00e08e85b..9f484113cfda 100644 --- a/include/soc/fsl/qman.h +++ b/include/soc/fsl/qman.h @@ -256,7 +256,7 @@ struct qm_dqrr_entry { __be32 context_b; struct qm_fd fd; u8 __reserved4[32]; -} __packed; +} __packed __aligned(64); #define QM_DQRR_VERB_VBIT 0x80 #define QM_DQRR_VERB_MASK 0x7f /* where the verb contains; */ #define QM_DQRR_VERB_FRAME_DEQUEUE 0x60 /* "this format" */ @@ -289,7 +289,7 @@ union qm_mr_entry { __be32 tag; struct qm_fd fd; u8 __reserved1[32]; - } __packed ern; + } __packed __aligned(64) ern; struct { u8 verb; u8 fqs; /* Frame Queue Status */ diff --git a/include/soc/tegra/fuse.h b/include/soc/tegra/fuse.h index 1097feca41ed..c702bd2911bc 100644 --- a/include/soc/tegra/fuse.h +++ b/include/soc/tegra/fuse.h @@ -14,6 +14,7 @@ #define TEGRA210 0x21 #define TEGRA186 0x18 #define TEGRA194 0x19 +#define TEGRA234 0x23 #define TEGRA_FUSE_SKU_CALIB_0 0xf0 #define TEGRA30_FUSE_SATA_CALIB 0x124 @@ -23,6 +24,8 @@ u32 tegra_read_chipid(void); u8 tegra_get_chip_id(void); +u8 tegra_get_platform(void); +bool tegra_is_silicon(void); enum tegra_revision { TEGRA_REVISION_UNKNOWN = 0, diff --git a/include/uapi/linux/tee.h b/include/uapi/linux/tee.h index b619f37ee03e..d67cadf221fc 100644 --- a/include/uapi/linux/tee.h +++ b/include/uapi/linux/tee.h @@ -51,6 +51,9 @@ #define TEE_GEN_CAP_GP (1 << 0)/* GlobalPlatform compliant TEE */ #define TEE_GEN_CAP_PRIVILEGED (1 << 1)/* Privileged device (for supplicant) */ #define TEE_GEN_CAP_REG_MEM (1 << 2)/* Supports registering shared memory */ +#define TEE_GEN_CAP_MEMREF_NULL (1 << 3)/* NULL MemRef support */ + +#define TEE_MEMREF_NULL (__u64)(-1) /* NULL MemRef Buffer */ /* * TEE Implementation ID @@ -200,6 +203,16 @@ struct tee_ioctl_buf_data { * a part of a shared memory by specifying an offset (@a) and size (@b) of * the object. To supply the entire shared memory object set the offset * (@a) to 0 and size (@b) to the previously returned size of the object. + * + * A client may need to present a NULL pointer in the argument + * passed to a trusted application in the TEE. + * This is also a requirement in GlobalPlatform Client API v1.0c + * (section 3.2.5 memory references), which can be found at + * http://www.globalplatform.org/specificationsdevice.asp + * + * If a NULL pointer is passed to a TA in the TEE, the (@c) + * IOCTL parameters value must be set to TEE_MEMREF_NULL indicating a NULL + * memory reference. */ struct tee_ioctl_param { __u64 attr; |