diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/pmbus.h | 30 |
1 files changed, 30 insertions, 0 deletions
diff --git a/include/linux/pmbus.h b/include/linux/pmbus.h index 12cbbf305969..fa9f08164c36 100644 --- a/include/linux/pmbus.h +++ b/include/linux/pmbus.h @@ -43,6 +43,36 @@ */ #define PMBUS_NO_CAPABILITY BIT(2) +/* + * PMBUS_READ_STATUS_AFTER_FAILED_CHECK + * + * Some PMBus chips end up in an undefined state when trying to read an + * unsupported register. For such chips, it is necessary to reset the + * chip pmbus controller to a known state after a failed register check. + * This can be done by reading a known register. By setting this flag the + * driver will try to read the STATUS register after each failed + * register check. This read may fail, but it will put the chip in a + * known state. + */ +#define PMBUS_READ_STATUS_AFTER_FAILED_CHECK BIT(3) + +/* + * PMBUS_NO_WRITE_PROTECT + * + * Some PMBus chips respond with invalid data when reading the WRITE_PROTECT + * register. For such chips, this flag should be set so that the PMBus core + * driver doesn't use the WRITE_PROTECT command to determine its behavior. + */ +#define PMBUS_NO_WRITE_PROTECT BIT(4) + +/* + * PMBUS_USE_COEFFICIENTS_CMD + * + * When this flag is set the PMBus core driver will use the COEFFICIENTS + * register to initialize the coefficients for the direct mode format. + */ +#define PMBUS_USE_COEFFICIENTS_CMD BIT(5) + struct pmbus_platform_data { u32 flags; /* Device specific flags */ |