diff options
Diffstat (limited to 'include')
-rw-r--r-- | include/linux/mfd/altera-sysmgr.h | 29 | ||||
-rw-r--r-- | include/linux/mfd/max77650.h | 59 | ||||
-rw-r--r-- | include/linux/mfd/stmfx.h | 123 | ||||
-rw-r--r-- | include/linux/mfd/ti-lmu-register.h | 44 | ||||
-rw-r--r-- | include/linux/mfd/ti-lmu.h | 1 |
5 files changed, 211 insertions, 45 deletions
diff --git a/include/linux/mfd/altera-sysmgr.h b/include/linux/mfd/altera-sysmgr.h new file mode 100644 index 000000000000..b1ef11a83872 --- /dev/null +++ b/include/linux/mfd/altera-sysmgr.h @@ -0,0 +1,29 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018-2019 Intel Corporation + * Copyright (C) 2012 Freescale Semiconductor, Inc. + * Copyright (C) 2012 Linaro Ltd. + */ + +#ifndef __LINUX_MFD_ALTERA_SYSMGR_H__ +#define __LINUX_MFD_ALTERA_SYSMGR_H__ + +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/firmware/intel/stratix10-smc.h> + +struct device_node; + +#ifdef CONFIG_MFD_ALTERA_SYSMGR +struct regmap *altr_sysmgr_regmap_lookup_by_phandle(struct device_node *np, + const char *property); +#else +static inline struct regmap * +altr_sysmgr_regmap_lookup_by_phandle(struct device_node *np, + const char *property) +{ + return ERR_PTR(-ENOTSUPP); +} +#endif + +#endif /* __LINUX_MFD_ALTERA_SYSMGR_H__ */ diff --git a/include/linux/mfd/max77650.h b/include/linux/mfd/max77650.h new file mode 100644 index 000000000000..c809e211a8cd --- /dev/null +++ b/include/linux/mfd/max77650.h @@ -0,0 +1,59 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2018 BayLibre SAS + * Author: Bartosz Golaszewski <bgolaszewski@baylibre.com> + * + * Common definitions for MAXIM 77650/77651 charger/power-supply. + */ + +#ifndef MAX77650_H +#define MAX77650_H + +#include <linux/bits.h> + +#define MAX77650_REG_INT_GLBL 0x00 +#define MAX77650_REG_INT_CHG 0x01 +#define MAX77650_REG_STAT_CHG_A 0x02 +#define MAX77650_REG_STAT_CHG_B 0x03 +#define MAX77650_REG_ERCFLAG 0x04 +#define MAX77650_REG_STAT_GLBL 0x05 +#define MAX77650_REG_INTM_GLBL 0x06 +#define MAX77650_REG_INTM_CHG 0x07 +#define MAX77650_REG_CNFG_GLBL 0x10 +#define MAX77650_REG_CID 0x11 +#define MAX77650_REG_CNFG_GPIO 0x12 +#define MAX77650_REG_CNFG_CHG_A 0x18 +#define MAX77650_REG_CNFG_CHG_B 0x19 +#define MAX77650_REG_CNFG_CHG_C 0x1a +#define MAX77650_REG_CNFG_CHG_D 0x1b +#define MAX77650_REG_CNFG_CHG_E 0x1c +#define MAX77650_REG_CNFG_CHG_F 0x1d +#define MAX77650_REG_CNFG_CHG_G 0x1e +#define MAX77650_REG_CNFG_CHG_H 0x1f +#define MAX77650_REG_CNFG_CHG_I 0x20 +#define MAX77650_REG_CNFG_SBB_TOP 0x28 +#define MAX77650_REG_CNFG_SBB0_A 0x29 +#define MAX77650_REG_CNFG_SBB0_B 0x2a +#define MAX77650_REG_CNFG_SBB1_A 0x2b +#define MAX77650_REG_CNFG_SBB1_B 0x2c +#define MAX77650_REG_CNFG_SBB2_A 0x2d +#define MAX77650_REG_CNFG_SBB2_B 0x2e +#define MAX77650_REG_CNFG_LDO_A 0x38 +#define MAX77650_REG_CNFG_LDO_B 0x39 +#define MAX77650_REG_CNFG_LED0_A 0x40 +#define MAX77650_REG_CNFG_LED1_A 0x41 +#define MAX77650_REG_CNFG_LED2_A 0x42 +#define MAX77650_REG_CNFG_LED0_B 0x43 +#define MAX77650_REG_CNFG_LED1_B 0x44 +#define MAX77650_REG_CNFG_LED2_B 0x45 +#define MAX77650_REG_CNFG_LED_TOP 0x46 + +#define MAX77650_CID_MASK GENMASK(3, 0) +#define MAX77650_CID_BITS(_reg) (_reg & MAX77650_CID_MASK) + +#define MAX77650_CID_77650A 0x03 +#define MAX77650_CID_77650C 0x0a +#define MAX77650_CID_77651A 0x06 +#define MAX77650_CID_77651B 0x08 + +#endif /* MAX77650_H */ diff --git a/include/linux/mfd/stmfx.h b/include/linux/mfd/stmfx.h new file mode 100644 index 000000000000..d890595b89b6 --- /dev/null +++ b/include/linux/mfd/stmfx.h @@ -0,0 +1,123 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2019 STMicroelectronics + * Author(s): Amelie Delaunay <amelie.delaunay@st.com>. + */ + +#ifndef MFD_STMFX_H +#define MFX_STMFX_H + +#include <linux/regmap.h> + +/* General */ +#define STMFX_REG_CHIP_ID 0x00 /* R */ +#define STMFX_REG_FW_VERSION_MSB 0x01 /* R */ +#define STMFX_REG_FW_VERSION_LSB 0x02 /* R */ +#define STMFX_REG_SYS_CTRL 0x40 /* RW */ +/* IRQ output management */ +#define STMFX_REG_IRQ_OUT_PIN 0x41 /* RW */ +#define STMFX_REG_IRQ_SRC_EN 0x42 /* RW */ +#define STMFX_REG_IRQ_PENDING 0x08 /* R */ +#define STMFX_REG_IRQ_ACK 0x44 /* RW */ +/* GPIO management */ +#define STMFX_REG_IRQ_GPI_PENDING1 0x0C /* R */ +#define STMFX_REG_IRQ_GPI_PENDING2 0x0D /* R */ +#define STMFX_REG_IRQ_GPI_PENDING3 0x0E /* R */ +#define STMFX_REG_GPIO_STATE1 0x10 /* R */ +#define STMFX_REG_GPIO_STATE2 0x11 /* R */ +#define STMFX_REG_GPIO_STATE3 0x12 /* R */ +#define STMFX_REG_IRQ_GPI_SRC1 0x48 /* RW */ +#define STMFX_REG_IRQ_GPI_SRC2 0x49 /* RW */ +#define STMFX_REG_IRQ_GPI_SRC3 0x4A /* RW */ +#define STMFX_REG_IRQ_GPI_EVT1 0x4C /* RW */ +#define STMFX_REG_IRQ_GPI_EVT2 0x4D /* RW */ +#define STMFX_REG_IRQ_GPI_EVT3 0x4E /* RW */ +#define STMFX_REG_IRQ_GPI_TYPE1 0x50 /* RW */ +#define STMFX_REG_IRQ_GPI_TYPE2 0x51 /* RW */ +#define STMFX_REG_IRQ_GPI_TYPE3 0x52 /* RW */ +#define STMFX_REG_IRQ_GPI_ACK1 0x54 /* RW */ +#define STMFX_REG_IRQ_GPI_ACK2 0x55 /* RW */ +#define STMFX_REG_IRQ_GPI_ACK3 0x56 /* RW */ +#define STMFX_REG_GPIO_DIR1 0x60 /* RW */ +#define STMFX_REG_GPIO_DIR2 0x61 /* RW */ +#define STMFX_REG_GPIO_DIR3 0x62 /* RW */ +#define STMFX_REG_GPIO_TYPE1 0x64 /* RW */ +#define STMFX_REG_GPIO_TYPE2 0x65 /* RW */ +#define STMFX_REG_GPIO_TYPE3 0x66 /* RW */ +#define STMFX_REG_GPIO_PUPD1 0x68 /* RW */ +#define STMFX_REG_GPIO_PUPD2 0x69 /* RW */ +#define STMFX_REG_GPIO_PUPD3 0x6A /* RW */ +#define STMFX_REG_GPO_SET1 0x6C /* RW */ +#define STMFX_REG_GPO_SET2 0x6D /* RW */ +#define STMFX_REG_GPO_SET3 0x6E /* RW */ +#define STMFX_REG_GPO_CLR1 0x70 /* RW */ +#define STMFX_REG_GPO_CLR2 0x71 /* RW */ +#define STMFX_REG_GPO_CLR3 0x72 /* RW */ + +#define STMFX_REG_MAX 0xB0 + +/* MFX boot time is around 10ms, so after reset, we have to wait this delay */ +#define STMFX_BOOT_TIME_MS 10 + +/* STMFX_REG_CHIP_ID bitfields */ +#define STMFX_REG_CHIP_ID_MASK GENMASK(7, 0) + +/* STMFX_REG_SYS_CTRL bitfields */ +#define STMFX_REG_SYS_CTRL_GPIO_EN BIT(0) +#define STMFX_REG_SYS_CTRL_TS_EN BIT(1) +#define STMFX_REG_SYS_CTRL_IDD_EN BIT(2) +#define STMFX_REG_SYS_CTRL_ALTGPIO_EN BIT(3) +#define STMFX_REG_SYS_CTRL_SWRST BIT(7) + +/* STMFX_REG_IRQ_OUT_PIN bitfields */ +#define STMFX_REG_IRQ_OUT_PIN_TYPE BIT(0) /* 0-OD 1-PP */ +#define STMFX_REG_IRQ_OUT_PIN_POL BIT(1) /* 0-active LOW 1-active HIGH */ + +/* STMFX_REG_IRQ_(SRC_EN/PENDING/ACK) bit shift */ +enum stmfx_irqs { + STMFX_REG_IRQ_SRC_EN_GPIO = 0, + STMFX_REG_IRQ_SRC_EN_IDD, + STMFX_REG_IRQ_SRC_EN_ERROR, + STMFX_REG_IRQ_SRC_EN_TS_DET, + STMFX_REG_IRQ_SRC_EN_TS_NE, + STMFX_REG_IRQ_SRC_EN_TS_TH, + STMFX_REG_IRQ_SRC_EN_TS_FULL, + STMFX_REG_IRQ_SRC_EN_TS_OVF, + STMFX_REG_IRQ_SRC_MAX, +}; + +enum stmfx_functions { + STMFX_FUNC_GPIO = BIT(0), /* GPIO[15:0] */ + STMFX_FUNC_ALTGPIO_LOW = BIT(1), /* aGPIO[3:0] */ + STMFX_FUNC_ALTGPIO_HIGH = BIT(2), /* aGPIO[7:4] */ + STMFX_FUNC_TS = BIT(3), + STMFX_FUNC_IDD = BIT(4), +}; + +/** + * struct stmfx_ddata - STMFX MFD structure + * @device: device reference used for logs + * @map: register map + * @vdd: STMFX power supply + * @irq_domain: IRQ domain + * @lock: IRQ bus lock + * @irq_src: cache of IRQ_SRC_EN register for bus_lock + * @bkp_sysctrl: backup of SYS_CTRL register for suspend/resume + * @bkp_irqoutpin: backup of IRQ_OUT_PIN register for suspend/resume + */ +struct stmfx { + struct device *dev; + struct regmap *map; + struct regulator *vdd; + struct irq_domain *irq_domain; + struct mutex lock; /* IRQ bus lock */ + u8 irq_src; +#ifdef CONFIG_PM + u8 bkp_sysctrl; + u8 bkp_irqoutpin; +#endif +}; + +int stmfx_function_enable(struct stmfx *stmfx, u32 func); +int stmfx_function_disable(struct stmfx *stmfx, u32 func); +#endif diff --git a/include/linux/mfd/ti-lmu-register.h b/include/linux/mfd/ti-lmu-register.h index 2125c7c02818..f09510561a55 100644 --- a/include/linux/mfd/ti-lmu-register.h +++ b/include/linux/mfd/ti-lmu-register.h @@ -15,50 +15,6 @@ #include <linux/bitops.h> -/* LM3532 */ -#define LM3532_REG_OUTPUT_CFG 0x10 -#define LM3532_ILED1_CFG_MASK 0x03 -#define LM3532_ILED2_CFG_MASK 0x0C -#define LM3532_ILED3_CFG_MASK 0x30 -#define LM3532_ILED1_CFG_SHIFT 0 -#define LM3532_ILED2_CFG_SHIFT 2 -#define LM3532_ILED3_CFG_SHIFT 4 - -#define LM3532_REG_RAMPUP 0x12 -#define LM3532_REG_RAMPDN LM3532_REG_RAMPUP -#define LM3532_RAMPUP_MASK 0x07 -#define LM3532_RAMPUP_SHIFT 0 -#define LM3532_RAMPDN_MASK 0x38 -#define LM3532_RAMPDN_SHIFT 3 - -#define LM3532_REG_ENABLE 0x1D - -#define LM3532_REG_PWM_A_CFG 0x13 -#define LM3532_PWM_A_MASK 0x05 /* zone 0 */ -#define LM3532_PWM_ZONE_0 BIT(2) - -#define LM3532_REG_PWM_B_CFG 0x14 -#define LM3532_PWM_B_MASK 0x09 /* zone 1 */ -#define LM3532_PWM_ZONE_1 BIT(3) - -#define LM3532_REG_PWM_C_CFG 0x15 -#define LM3532_PWM_C_MASK 0x11 /* zone 2 */ -#define LM3532_PWM_ZONE_2 BIT(4) - -#define LM3532_REG_ZONE_CFG_A 0x16 -#define LM3532_REG_ZONE_CFG_B 0x18 -#define LM3532_REG_ZONE_CFG_C 0x1A -#define LM3532_ZONE_MASK (BIT(2) | BIT(3) | BIT(4)) -#define LM3532_ZONE_0 0 -#define LM3532_ZONE_1 BIT(2) -#define LM3532_ZONE_2 BIT(3) - -#define LM3532_REG_BRT_A 0x70 /* zone 0 */ -#define LM3532_REG_BRT_B 0x76 /* zone 1 */ -#define LM3532_REG_BRT_C 0x7C /* zone 2 */ - -#define LM3532_MAX_REG 0x7E - /* LM3631 */ #define LM3631_REG_DEVCTRL 0x00 #define LM3631_LCD_EN_MASK BIT(1) diff --git a/include/linux/mfd/ti-lmu.h b/include/linux/mfd/ti-lmu.h index 1ef51ed36be5..7762c1bce55d 100644 --- a/include/linux/mfd/ti-lmu.h +++ b/include/linux/mfd/ti-lmu.h @@ -22,7 +22,6 @@ #define LMU_EVENT_MONITOR_DONE 0x01 enum ti_lmu_id { - LM3532, LM3631, LM3632, LM3633, |