diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/drm/drm_connector.h | 15 | ||||
| -rw-r--r-- | include/drm/drm_crtc.h | 9 | ||||
| -rw-r--r-- | include/drm/drm_damage_helper.h | 99 | ||||
| -rw-r--r-- | include/drm/drm_dp_helper.h | 3 | ||||
| -rw-r--r-- | include/drm/drm_dsc.h | 485 | ||||
| -rw-r--r-- | include/drm/drm_mode_config.h | 14 | ||||
| -rw-r--r-- | include/drm/drm_plane.h | 42 | ||||
| -rw-r--r-- | include/linux/sysfs.h | 8 | ||||
| -rw-r--r-- | include/uapi/drm/drm_mode.h | 19 | ||||
| -rw-r--r-- | include/video/imx-ipu-v3.h | 9 |
10 files changed, 698 insertions, 5 deletions
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h index 665b9cae7f43..9be2181b3ed7 100644 --- a/include/drm/drm_connector.h +++ b/include/drm/drm_connector.h @@ -972,6 +972,17 @@ struct drm_connector { struct drm_property *scaling_mode_property; /** + * @vrr_capable_property: Optional property to help userspace + * query hardware support for variable refresh rate on a connector. + * connector. Drivers can add the property to a connector by + * calling drm_connector_attach_vrr_capable_property(). + * + * This should be updated only by calling + * drm_connector_set_vrr_capable_property(). + */ + struct drm_property *vrr_capable_property; + + /** * @content_protection_property: DRM ENUM property for content * protection. See drm_connector_attach_content_protection_property(). */ @@ -1245,6 +1256,8 @@ int drm_mode_create_scaling_mode_property(struct drm_device *dev); int drm_connector_attach_content_type_property(struct drm_connector *dev); int drm_connector_attach_scaling_mode_property(struct drm_connector *connector, u32 scaling_mode_mask); +int drm_connector_attach_vrr_capable_property( + struct drm_connector *connector); int drm_connector_attach_content_protection_property( struct drm_connector *connector); int drm_mode_create_aspect_ratio_property(struct drm_device *dev); @@ -1261,6 +1274,8 @@ int drm_connector_update_edid_property(struct drm_connector *connector, const struct edid *edid); void drm_connector_set_link_status_property(struct drm_connector *connector, uint64_t link_status); +void drm_connector_set_vrr_capable_property( + struct drm_connector *connector, bool capable); int drm_connector_init_panel_orientation_property( struct drm_connector *connector, int width, int height); int drm_connector_attach_max_bpc_property(struct drm_connector *connector, diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index b21437bc95bf..39c3900aab3c 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -291,6 +291,15 @@ struct drm_crtc_state { u32 pageflip_flags; /** + * @vrr_enabled: + * + * Indicates if variable refresh rate should be enabled for the CRTC. + * Support for the requested vrr state will depend on driver and + * hardware capabiltiy - lacking support is not treated as failure. + */ + bool vrr_enabled; + + /** * @event: * * Optional pointer to a DRM event to signal upon completion of the diff --git a/include/drm/drm_damage_helper.h b/include/drm/drm_damage_helper.h new file mode 100644 index 000000000000..4487660b26b8 --- /dev/null +++ b/include/drm/drm_damage_helper.h @@ -0,0 +1,99 @@ +/* SPDX-License-Identifier: GPL-2.0 OR MIT */ +/************************************************************************** + * + * Copyright (c) 2018 VMware, Inc., Palo Alto, CA., USA + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sub license, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, + * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR + * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE + * USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * Authors: + * Deepak Rawat <drawat@vmware.com> + * + **************************************************************************/ + +#ifndef DRM_DAMAGE_HELPER_H_ +#define DRM_DAMAGE_HELPER_H_ + +#include <drm/drm_atomic_helper.h> + +/** + * drm_atomic_for_each_plane_damage - Iterator macro for plane damage. + * @iter: The iterator to advance. + * @rect: Return a rectangle in fb coordinate clipped to plane src. + * + * Note that if the first call to iterator macro return false then no need to do + * plane update. Iterator will return full plane src when damage is not passed + * by user-space. + */ +#define drm_atomic_for_each_plane_damage(iter, rect) \ + while (drm_atomic_helper_damage_iter_next(iter, rect)) + +/** + * struct drm_atomic_helper_damage_iter - Closure structure for damage iterator. + * + * This structure tracks state needed to walk the list of plane damage clips. + */ +struct drm_atomic_helper_damage_iter { + /* private: Plane src in whole number. */ + struct drm_rect plane_src; + /* private: Rectangles in plane damage blob. */ + const struct drm_rect *clips; + /* private: Number of rectangles in plane damage blob. */ + uint32_t num_clips; + /* private: Current clip iterator is advancing on. */ + uint32_t curr_clip; + /* private: Whether need full plane update. */ + bool full_update; +}; + +void drm_plane_enable_fb_damage_clips(struct drm_plane *plane); +void drm_atomic_helper_check_plane_damage(struct drm_atomic_state *state, + struct drm_plane_state *plane_state); +int drm_atomic_helper_dirtyfb(struct drm_framebuffer *fb, + struct drm_file *file_priv, unsigned int flags, + unsigned int color, struct drm_clip_rect *clips, + unsigned int num_clips); +void +drm_atomic_helper_damage_iter_init(struct drm_atomic_helper_damage_iter *iter, + const struct drm_plane_state *old_state, + const struct drm_plane_state *new_state); +bool +drm_atomic_helper_damage_iter_next(struct drm_atomic_helper_damage_iter *iter, + struct drm_rect *rect); + +/** + * drm_helper_get_plane_damage_clips - Returns damage clips in &drm_rect. + * @state: Plane state. + * + * Returns plane damage rectangles in internal &drm_rect. Currently &drm_rect + * can be obtained by simply typecasting &drm_mode_rect. This is because both + * are signed 32 and during drm_atomic_check_only() it is verified that damage + * clips are inside fb. + * + * Return: Clips in plane fb_damage_clips blob property. + */ +static inline struct drm_rect * +drm_helper_get_plane_damage_clips(const struct drm_plane_state *state) +{ + return (struct drm_rect *)drm_plane_get_damage_clips(state); +} + +#endif diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index 3314e91f6eb3..5736c942c85b 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -1123,7 +1123,8 @@ drm_dp_is_branch(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) u8 drm_dp_dsc_sink_max_slice_count(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE], bool is_edp); u8 drm_dp_dsc_sink_line_buf_depth(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE]); -u8 drm_dp_dsc_sink_max_color_depth(const u8 dsc_dpc[DP_DSC_RECEIVER_CAP_SIZE]); +int drm_dp_dsc_sink_supported_input_bpcs(const u8 dsc_dpc[DP_DSC_RECEIVER_CAP_SIZE], + u8 dsc_bpc[3]); static inline bool drm_dp_sink_supports_dsc(const u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE]) diff --git a/include/drm/drm_dsc.h b/include/drm/drm_dsc.h new file mode 100644 index 000000000000..d03f1b83421a --- /dev/null +++ b/include/drm/drm_dsc.h @@ -0,0 +1,485 @@ +/* SPDX-License-Identifier: MIT + * Copyright (C) 2018 Intel Corp. + * + * Authors: + * Manasi Navare <manasi.d.navare@intel.com> + */ + +#ifndef DRM_DSC_H_ +#define DRM_DSC_H_ + +#include <drm/drm_dp_helper.h> + +/* VESA Display Stream Compression DSC 1.2 constants */ +#define DSC_NUM_BUF_RANGES 15 +#define DSC_MUX_WORD_SIZE_8_10_BPC 48 +#define DSC_MUX_WORD_SIZE_12_BPC 64 +#define DSC_RC_PIXELS_PER_GROUP 3 +#define DSC_SCALE_DECREMENT_INTERVAL_MAX 4095 +#define DSC_RANGE_BPG_OFFSET_MASK 0x3f + +/* DSC Rate Control Constants */ +#define DSC_RC_MODEL_SIZE_CONST 8192 +#define DSC_RC_EDGE_FACTOR_CONST 6 +#define DSC_RC_TGT_OFFSET_HI_CONST 3 +#define DSC_RC_TGT_OFFSET_LO_CONST 3 + +/* DSC PPS constants and macros */ +#define DSC_PPS_VERSION_MAJOR_SHIFT 4 +#define DSC_PPS_BPC_SHIFT 4 +#define DSC_PPS_MSB_SHIFT 8 +#define DSC_PPS_LSB_MASK (0xFF << 0) +#define DSC_PPS_BPP_HIGH_MASK (0x3 << 8) +#define DSC_PPS_VBR_EN_SHIFT 2 +#define DSC_PPS_SIMPLE422_SHIFT 3 +#define DSC_PPS_CONVERT_RGB_SHIFT 4 +#define DSC_PPS_BLOCK_PRED_EN_SHIFT 5 +#define DSC_PPS_INIT_XMIT_DELAY_HIGH_MASK (0x3 << 8) +#define DSC_PPS_SCALE_DEC_INT_HIGH_MASK (0xF << 8) +#define DSC_PPS_RC_TGT_OFFSET_HI_SHIFT 4 +#define DSC_PPS_RC_RANGE_MINQP_SHIFT 11 +#define DSC_PPS_RC_RANGE_MAXQP_SHIFT 6 +#define DSC_PPS_NATIVE_420_SHIFT 1 +#define DSC_1_2_MAX_LINEBUF_DEPTH_BITS 16 +#define DSC_1_2_MAX_LINEBUF_DEPTH_VAL 0 +#define DSC_1_1_MAX_LINEBUF_DEPTH_BITS 13 + +/* Configuration for a single Rate Control model range */ +struct drm_dsc_rc_range_parameters { + /* Min Quantization Parameters allowed for this range */ + u8 range_min_qp; + /* Max Quantization Parameters allowed for this range */ + u8 range_max_qp; + /* Bits/group offset to apply to target for this group */ + u8 range_bpg_offset; +}; + +struct drm_dsc_config { + /* Bits / component for previous reconstructed line buffer */ + u8 line_buf_depth; + /* Bits per component to code (must be 8, 10, or 12) */ + u8 bits_per_component; + /* + * Flag indicating to do RGB - YCoCg conversion + * and back (should be 1 for RGB input) + */ + bool convert_rgb; + u8 slice_count; + /* Slice Width */ + u16 slice_width; + /* Slice Height */ + u16 slice_height; + /* + * 4:2:2 enable mode (from PPS, 4:2:2 conversion happens + * outside of DSC encode/decode algorithm) + */ + bool enable422; + /* Picture Width */ + u16 pic_width; + /* Picture Height */ + u16 pic_height; + /* Offset to bits/group used by RC to determine QP adjustment */ + u8 rc_tgt_offset_high; + /* Offset to bits/group used by RC to determine QP adjustment */ + u8 rc_tgt_offset_low; + /* Bits/pixel target << 4 (ie., 4 fractional bits) */ + u16 bits_per_pixel; + /* + * Factor to determine if an edge is present based + * on the bits produced + */ + u8 rc_edge_factor; + /* Slow down incrementing once the range reaches this value */ + u8 rc_quant_incr_limit1; + /* Slow down incrementing once the range reaches this value */ + u8 rc_quant_incr_limit0; + /* Number of pixels to delay the initial transmission */ + u16 initial_xmit_delay; + /* Number of pixels to delay the VLD on the decoder,not including SSM */ + u16 initial_dec_delay; + /* Block prediction enable */ + bool block_pred_enable; + /* Bits/group offset to use for first line of the slice */ + u8 first_line_bpg_offset; + /* Value to use for RC model offset at slice start */ + u16 initial_offset; + /* Thresholds defining each of the buffer ranges */ + u16 rc_buf_thresh[DSC_NUM_BUF_RANGES - 1]; + /* Parameters for each of the RC ranges */ + struct drm_dsc_rc_range_parameters rc_range_params[DSC_NUM_BUF_RANGES]; + /* Total size of RC model */ + u16 rc_model_size; + /* Minimum QP where flatness information is sent */ + u8 flatness_min_qp; + /* Maximum QP where flatness information is sent */ + u8 flatness_max_qp; + /* Initial value for scale factor */ + u8 initial_scale_value; + /* Decrement scale factor every scale_decrement_interval groups */ + u16 scale_decrement_interval; + /* Increment scale factor every scale_increment_interval groups */ + u16 scale_increment_interval; + /* Non-first line BPG offset to use */ + u16 nfl_bpg_offset; + /* BPG offset used to enforce slice bit */ + u16 slice_bpg_offset; + /* Final RC linear transformation offset value */ + u16 final_offset; + /* Enable on-off VBR (ie., disable stuffing bits) */ + bool vbr_enable; + /* Mux word size (in bits) for SSM mode */ + u8 mux_word_size; + /* + * The (max) size in bytes of the "chunks" that are + * used in slice multiplexing + */ + u16 slice_chunk_size; + /* Rate Control buffer siz in bits */ + u16 rc_bits; + /* DSC Minor Version */ + u8 dsc_version_minor; + /* DSC Major version */ + u8 dsc_version_major; + /* Native 4:2:2 support */ + bool native_422; + /* Native 4:2:0 support */ + bool native_420; + /* Additional bits/grp for seconnd line of slice for native 4:2:0 */ + u8 second_line_bpg_offset; + /* Num of bits deallocated for each grp that is not in second line of slice */ + u16 nsl_bpg_offset; + /* Offset adj fr second line in Native 4:2:0 mode */ + u16 second_line_offset_adj; +}; + +/** + * struct picture_parameter_set - Represents 128 bytes of Picture Parameter Set + * + * The VESA DSC standard defines picture parameter set (PPS) which display + * stream compression encoders must communicate to decoders. + * The PPS is encapsulated in 128 bytes (PPS 0 through PPS 127). The fields in + * this structure are as per Table 4.1 in Vesa DSC specification v1.1/v1.2. + * The PPS fields that span over more than a byte should be stored in Big Endian + * format. + */ +struct drm_dsc_picture_parameter_set { + /** + * @dsc_version: + * PPS0[3:0] - dsc_version_minor: Contains Minor version of DSC + * PPS0[7:4] - dsc_version_major: Contains major version of DSC + */ + u8 dsc_version; + /** + * @pps_identifier: + * PPS1[7:0] - Application specific identifier that can be + * used to differentiate between different PPS tables. + */ + u8 pps_identifier; + /** + * @pps_reserved: + * PPS2[7:0]- RESERVED Byte + */ + u8 pps_reserved; + /** + * @pps_3: + * PPS3[3:0] - linebuf_depth: Contains linebuffer bit depth used to + * generate the bitstream. (0x0 - 16 bits for DSC 1.2, 0x8 - 8 bits, + * 0xA - 10 bits, 0xB - 11 bits, 0xC - 12 bits, 0xD - 13 bits, + * 0xE - 14 bits for DSC1.2, 0xF - 14 bits for DSC 1.2. + * PPS3[7:4] - bits_per_component: Bits per component for the original + * pixels of the encoded picture. + * 0x0 = 16bpc (allowed only when dsc_version_minor = 0x2) + * 0x8 = 8bpc, 0xA = 10bpc, 0xC = 12bpc, 0xE = 14bpc (also + * allowed only when dsc_minor_version = 0x2) + */ + u8 pps_3; + /** + * @pps_4: + * PPS4[1:0] -These are the most significant 2 bits of + * compressed BPP bits_per_pixel[9:0] syntax element. + * PPS4[2] - vbr_enable: 0 = VBR disabled, 1 = VBR enabled + * PPS4[3] - simple_422: Indicates if decoder drops samples to + * reconstruct the 4:2:2 picture. + * PPS4[4] - Convert_rgb: Indicates if DSC color space conversion is + * active. + * PPS4[5] - blobk_pred_enable: Indicates if BP is used to code any + * groups in picture + * PPS4[7:6] - Reseved bits + */ + u8 pps_4; + /** + * @bits_per_pixel_low: + * PPS5[7:0] - This indicates the lower significant 8 bits of + * the compressed BPP bits_per_pixel[9:0] element. + */ + u8 bits_per_pixel_low; + /** + * @pic_height: + * PPS6[7:0], PPS7[7:0] -pic_height: Specifies the number of pixel rows + * within the raster. + */ + __be16 pic_height; + /** + * @pic_width: + * PPS8[7:0], PPS9[7:0] - pic_width: Number of pixel columns within + * the raster. + */ + __be16 pic_width; + /** + * @slice_height: + * PPS10[7:0], PPS11[7:0] - Slice height in units of pixels. + */ + __be16 slice_height; + /** + * @slice_width: + * PPS12[7:0], PPS13[7:0] - Slice width in terms of pixels. + */ + __be16 slice_width; + /** + * @chunk_size: + * PPS14[7:0], PPS15[7:0] - Size in units of bytes of the chunks + * that are used for slice multiplexing. + */ + __be16 chunk_size; + /** + * @initial_xmit_delay_high: + * PPS16[1:0] - Most Significant two bits of initial transmission delay. + * It specifies the number of pixel times that the encoder waits before + * transmitting data from its rate buffer. + * PPS16[7:2] - Reserved + */ + u8 initial_xmit_delay_high; + /** + * @initial_xmit_delay_low: + * PPS17[7:0] - Least significant 8 bits of initial transmission delay. + */ + u8 initial_xmit_delay_low; + /** + * @initial_dec_delay: + * + * PPS18[7:0], PPS19[7:0] - Initial decoding delay which is the number + * of pixel times that the decoder accumulates data in its rate buffer + * before starting to decode and output pixels. + */ + __be16 initial_dec_delay; + /** + * @pps20_reserved: + * + * PPS20[7:0] - Reserved + */ + u8 pps20_reserved; + /** + * @initial_scale_value: + * PPS21[5:0] - Initial rcXformScale factor used at beginning + * of a slice. + * PPS21[7:6] - Reserved + */ + u8 initial_scale_value; + /** + * @scale_increment_interval: + * PPS22[7:0], PPS23[7:0] - Number of group times between incrementing + * the rcXformScale factor at end of a slice. + */ + __be16 scale_increment_interval; + /** + * @scale_decrement_interval_high: + * PPS24[3:0] - Higher 4 bits indicating number of group times between + * decrementing the rcXformScale factor at beginning of a slice. + * PPS24[7:4] - Reserved + */ + u8 scale_decrement_interval_high; + /** + * @scale_decrement_interval_low: + * PPS25[7:0] - Lower 8 bits of scale decrement interval + */ + u8 scale_decrement_interval_low; + /** + * @pps26_reserved: + * PPS26[7:0] + */ + u8 pps26_reserved; + /** + * @first_line_bpg_offset: + * PPS27[4:0] - Number of additional bits that are allocated + * for each group on first line of a slice. + * PPS27[7:5] - Reserved + */ + u8 first_line_bpg_offset; + /** + * @nfl_bpg_offset: + * PPS28[7:0], PPS29[7:0] - Number of bits including frac bits + * deallocated for each group for groups after the first line of slice. + */ + __be16 nfl_bpg_offset; + /** + * @slice_bpg_offset: + * PPS30, PPS31[7:0] - Number of bits that are deallocated for each + * group to enforce the slice constraint. + */ + __be16 slice_bpg_offset; + /** + * @initial_offset: + * PPS32,33[7:0] - Initial value for rcXformOffset + */ + __be16 initial_offset; + /** + * @final_offset: + * PPS34,35[7:0] - Maximum end-of-slice value for rcXformOffset + */ + __be16 final_offset; + /** + * @flatness_min_qp: + * PPS36[4:0] - Minimum QP at which flatness is signaled and + * flatness QP adjustment is made. + * PPS36[7:5] - Reserved + */ + u8 flatness_min_qp; + /** + * @flatness_max_qp: + * PPS37[4:0] - Max QP at which flatness is signalled and + * the flatness adjustment is made. + * PPS37[7:5] - Reserved + */ + u8 flatness_max_qp; + /** + * @rc_model_size: + * PPS38,39[7:0] - Number of bits within RC Model. + */ + __be16 rc_model_size; + /** + * @rc_edge_factor: + * PPS40[3:0] - Ratio of current activity vs, previous + * activity to determine presence of edge. + * PPS40[7:4] - Reserved + */ + u8 rc_edge_factor; + /** + * @rc_quant_incr_limit0: + * PPS41[4:0] - QP threshold used in short term RC + * PPS41[7:5] - Reserved + */ + u8 rc_quant_incr_limit0; + /** + * @rc_quant_incr_limit1: + * PPS42[4:0] - QP threshold used in short term RC + * PPS42[7:5] - Reserved + */ + u8 rc_quant_incr_limit1; + /** + * @rc_tgt_offset: + * PPS43[3:0] - Lower end of the variability range around the target + * bits per group that is allowed by short term RC. + * PPS43[7:4]- Upper end of the variability range around the target + * bits per group that i allowed by short term rc. + */ + u8 rc_tgt_offset; + /** + * @rc_buf_thresh: + * PPS44[7:0] - PPS57[7:0] - Specifies the thresholds in RC model for + * the 15 ranges defined by 14 thresholds. + */ + u8 rc_buf_thresh[DSC_NUM_BUF_RANGES - 1]; + /** + * @rc_range_parameters: + * PPS58[7:0] - PPS87[7:0] + * Parameters that correspond to each of the 15 ranges. + */ + __be16 rc_range_parameters[DSC_NUM_BUF_RANGES]; + /** + * @native_422_420: + * PPS88[0] - 0 = Native 4:2:2 not used + * 1 = Native 4:2:2 used + * PPS88[1] - 0 = Native 4:2:0 not use + * 1 = Native 4:2:0 used + * PPS88[7:2] - Reserved 6 bits + */ + u8 native_422_420; + /** + * @second_line_bpg_offset: + * PPS89[4:0] - Additional bits/group budget for the + * second line of a slice in Native 4:2:0 mode. + * Set to 0 if DSC minor version is 1 or native420 is 0. + * PPS89[7:5] - Reserved + */ + u8 second_line_bpg_offset; + /** + * @nsl_bpg_offset: + * PPS90[7:0], PPS91[7:0] - Number of bits that are deallocated + * for each group that is not in the second line of a slice. + */ + __be16 nsl_bpg_offset; + /** + * @second_line_offset_adj: + * PPS92[7:0], PPS93[7:0] - Used as offset adjustment for the second + * line in Native 4:2:0 mode. + */ + __be16 second_line_offset_adj; + /** + * @pps_long_94_reserved: + * PPS 94, 95, 96, 97 - Reserved + */ + u32 pps_long_94_reserved; + /** + * @pps_long_98_reserved: + * PPS 98, 99, 100, 101 - Reserved + */ + u32 pps_long_98_reserved; + /** + * @pps_long_102_reserved: + * PPS 102, 103, 104, 105 - Reserved + */ + u32 pps_long_102_reserved; + /** + * @pps_long_106_reserved: + * PPS 106, 107, 108, 109 - reserved + */ + u32 pps_long_106_reserved; + /** + * @pps_long_110_reserved: + * PPS 110, 111, 112, 113 - reserved + */ + u32 pps_long_110_reserved; + /** + * @pps_long_114_reserved: + * PPS 114 - 117 - reserved + */ + u32 pps_long_114_reserved; + /** + * @pps_long_118_reserved: + * PPS 118 - 121 - reserved + */ + u32 pps_long_118_reserved; + /** + * @pps_long_122_reserved: + * PPS 122- 125 - reserved + */ + u32 pps_long_122_reserved; + /** + * @pps_short_126_reserved: + * PPS 126, 127 - reserved + */ + __be16 pps_short_126_reserved; +} __packed; + +/** + * struct drm_dsc_pps_infoframe - DSC infoframe carrying the Picture Parameter + * Set Metadata + * + * This structure represents the DSC PPS infoframe required to send the Picture + * Parameter Set metadata required before enabling VESA Display Stream + * Compression. This is based on the DP Secondary Data Packet structure and + * comprises of SDP Header as defined in drm_dp_helper.h and PPS payload. + * + * @pps_header: Header for PPS as per DP SDP header format + * @pps_payload: PPS payload fields as per DSC specification Table 4-1 + */ +struct drm_dsc_pps_infoframe { + struct dp_sdp_header pps_header; + struct drm_dsc_picture_parameter_set pps_payload; +} __packed; + +void drm_dsc_dp_pps_header_init(struct drm_dsc_pps_infoframe *pps_sdp); +void drm_dsc_pps_infoframe_pack(struct drm_dsc_pps_infoframe *pps_sdp, + const struct drm_dsc_config *dsc_cfg); + +#endif /* _DRM_DSC_H_ */ diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h index 5dbeabdbaf91..572274ccbec7 100644 --- a/include/drm/drm_mode_config.h +++ b/include/drm/drm_mode_config.h @@ -634,6 +634,15 @@ struct drm_mode_config { */ struct drm_property *prop_crtc_id; /** + * @prop_fb_damage_clips: Optional plane property to mark damaged + * regions on the plane in framebuffer coordinates of the framebuffer + * attached to the plane. + * + * The layout of blob data is simply an array of &drm_mode_rect. Unlike + * plane src coordinates, damage clips are not in 16.16 fixed point. + */ + struct drm_property *prop_fb_damage_clips; + /** * @prop_active: Default atomic CRTC property to control the active * state, which is the simplified implementation for DPMS in atomic * drivers. @@ -645,6 +654,11 @@ struct drm_mode_config { * connectors must be of and active must be set to disabled, too. */ struct drm_property *prop_mode_id; + /** + * @prop_vrr_enabled: Default atomic CRTC property to indicate + * whether variable refresh rate should be enabled on the CRTC. + */ + struct drm_property *prop_vrr_enabled; /** * @dvi_i_subconnector_property: Optional DVI-I property to diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h index 3701f56c3362..6078c700d9ba 100644 --- a/include/drm/drm_plane.h +++ b/include/drm/drm_plane.h @@ -173,6 +173,16 @@ struct drm_plane_state { */ enum drm_color_range color_range; + /** + * @fb_damage_clips: + * + * Blob representing damage (area in plane framebuffer that changed + * since last plane update) as an array of &drm_mode_rect in framebuffer + * coodinates of the attached framebuffer. Note that unlike plane src, + * damage clips are not in 16.16 fixed point. + */ + struct drm_property_blob *fb_damage_clips; + /** @src: clipped source coordinates of the plane (in 16.16) */ /** @dst: clipped destination coordinates of the plane */ struct drm_rect src, dst; @@ -800,5 +810,37 @@ static inline struct drm_plane *drm_plane_find(struct drm_device *dev, bool drm_any_plane_has_format(struct drm_device *dev, u32 format, u64 modifier); +/** + * drm_plane_get_damage_clips_count - Returns damage clips count. + * @state: Plane state. + * + * Simple helper to get the number of &drm_mode_rect clips set by user-space + * during plane update. + * + * Return: Number of clips in plane fb_damage_clips blob property. + */ +static inline unsigned int +drm_plane_get_damage_clips_count(const struct drm_plane_state *state) +{ + return (state && state->fb_damage_clips) ? + state->fb_damage_clips->length/sizeof(struct drm_mode_rect) : 0; +} + +/** + * drm_plane_get_damage_clips - Returns damage clips. + * @state: Plane state. + * + * Note that this function returns uapi type &drm_mode_rect. Drivers might + * instead be interested in internal &drm_rect which can be obtained by calling + * drm_helper_get_plane_damage_clips(). + * + * Return: Damage clips in plane fb_damage_clips blob property. + */ +static inline struct drm_mode_rect * +drm_plane_get_damage_clips(const struct drm_plane_state *state) +{ + return (struct drm_mode_rect *)((state && state->fb_damage_clips) ? + state->fb_damage_clips->data : NULL); +} #endif diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h index 987cefa337de..786816cf4aa5 100644 --- a/include/linux/sysfs.h +++ b/include/linux/sysfs.h @@ -234,7 +234,7 @@ int __must_check sysfs_create_file_ns(struct kobject *kobj, const struct attribute *attr, const void *ns); int __must_check sysfs_create_files(struct kobject *kobj, - const struct attribute **attr); + const struct attribute * const *attr); int __must_check sysfs_chmod_file(struct kobject *kobj, const struct attribute *attr, umode_t mode); struct kernfs_node *sysfs_break_active_protection(struct kobject *kobj, @@ -243,7 +243,7 @@ void sysfs_unbreak_active_protection(struct kernfs_node *kn); void sysfs_remove_file_ns(struct kobject *kobj, const struct attribute *attr, const void *ns); bool sysfs_remove_file_self(struct kobject *kobj, const struct attribute *attr); -void sysfs_remove_files(struct kobject *kobj, const struct attribute **attr); +void sysfs_remove_files(struct kobject *kobj, const struct attribute * const *attr); int __must_check sysfs_create_bin_file(struct kobject *kobj, const struct bin_attribute *attr); @@ -342,7 +342,7 @@ static inline int sysfs_create_file_ns(struct kobject *kobj, } static inline int sysfs_create_files(struct kobject *kobj, - const struct attribute **attr) + const struct attribute * const *attr) { return 0; } @@ -377,7 +377,7 @@ static inline bool sysfs_remove_file_self(struct kobject *kobj, } static inline void sysfs_remove_files(struct kobject *kobj, - const struct attribute **attr) + const struct attribute * const *attr) { } diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h index d3e0fe31efc5..a439c2e67896 100644 --- a/include/uapi/drm/drm_mode.h +++ b/include/uapi/drm/drm_mode.h @@ -888,6 +888,25 @@ struct drm_mode_revoke_lease { __u32 lessee_id; }; +/** + * struct drm_mode_rect - Two dimensional rectangle. + * @x1: Horizontal starting coordinate (inclusive). + * @y1: Vertical starting coordinate (inclusive). + * @x2: Horizontal ending coordinate (exclusive). + * @y2: Vertical ending coordinate (exclusive). + * + * With drm subsystem using struct drm_rect to manage rectangular area this + * export it to user-space. + * + * Currently used by drm_mode_atomic blob property FB_DAMAGE_CLIPS. + */ +struct drm_mode_rect { + __s32 x1; + __s32 y1; + __s32 x2; + __s32 y2; +}; + #if defined(__cplusplus) } #endif diff --git a/include/video/imx-ipu-v3.h b/include/video/imx-ipu-v3.h index abbad94e14a1..e582e8e7527a 100644 --- a/include/video/imx-ipu-v3.h +++ b/include/video/imx-ipu-v3.h @@ -246,6 +246,9 @@ struct ipu_image { struct v4l2_rect rect; dma_addr_t phys0; dma_addr_t phys1; + /* chroma plane offset overrides */ + u32 u_offset; + u32 v_offset; }; void ipu_cpmem_zero(struct ipuv3_channel *ch); @@ -387,6 +390,12 @@ int ipu_ic_task_init(struct ipu_ic *ic, int out_width, int out_height, enum ipu_color_space in_cs, enum ipu_color_space out_cs); +int ipu_ic_task_init_rsc(struct ipu_ic *ic, + int in_width, int in_height, + int out_width, int out_height, + enum ipu_color_space in_cs, + enum ipu_color_space out_cs, + u32 rsc); int ipu_ic_task_graphics_init(struct ipu_ic *ic, enum ipu_color_space in_g_cs, bool galpha_en, u32 galpha, |