summaryrefslogtreecommitdiff
path: root/kernel/cpu.c
diff options
context:
space:
mode:
Diffstat (limited to 'kernel/cpu.c')
-rw-r--r--kernel/cpu.c297
1 files changed, 283 insertions, 14 deletions
diff --git a/kernel/cpu.c b/kernel/cpu.c
index 0db8938fbb23..ed44d7d34c2d 100644
--- a/kernel/cpu.c
+++ b/kernel/cpu.c
@@ -60,6 +60,7 @@ struct cpuhp_cpu_state {
bool rollback;
bool single;
bool bringup;
+ bool booted_once;
struct hlist_node *node;
struct hlist_node *last;
enum cpuhp_state cb_state;
@@ -290,6 +291,12 @@ void cpus_read_lock(void)
}
EXPORT_SYMBOL_GPL(cpus_read_lock);
+int cpus_read_trylock(void)
+{
+ return percpu_down_read_trylock(&cpu_hotplug_lock);
+}
+EXPORT_SYMBOL_GPL(cpus_read_trylock);
+
void cpus_read_unlock(void)
{
percpu_up_read(&cpu_hotplug_lock);
@@ -342,6 +349,85 @@ void cpu_hotplug_enable(void)
EXPORT_SYMBOL_GPL(cpu_hotplug_enable);
#endif /* CONFIG_HOTPLUG_CPU */
+#ifdef CONFIG_HOTPLUG_SMT
+enum cpuhp_smt_control cpu_smt_control __read_mostly = CPU_SMT_ENABLED;
+EXPORT_SYMBOL_GPL(cpu_smt_control);
+
+static bool cpu_smt_available __read_mostly;
+
+void __init cpu_smt_disable(bool force)
+{
+ if (cpu_smt_control == CPU_SMT_FORCE_DISABLED ||
+ cpu_smt_control == CPU_SMT_NOT_SUPPORTED)
+ return;
+
+ if (force) {
+ pr_info("SMT: Force disabled\n");
+ cpu_smt_control = CPU_SMT_FORCE_DISABLED;
+ } else {
+ cpu_smt_control = CPU_SMT_DISABLED;
+ }
+}
+
+/*
+ * The decision whether SMT is supported can only be done after the full
+ * CPU identification. Called from architecture code before non boot CPUs
+ * are brought up.
+ */
+void __init cpu_smt_check_topology_early(void)
+{
+ if (!topology_smt_supported())
+ cpu_smt_control = CPU_SMT_NOT_SUPPORTED;
+}
+
+/*
+ * If SMT was disabled by BIOS, detect it here, after the CPUs have been
+ * brought online. This ensures the smt/l1tf sysfs entries are consistent
+ * with reality. cpu_smt_available is set to true during the bringup of non
+ * boot CPUs when a SMT sibling is detected. Note, this may overwrite
+ * cpu_smt_control's previous setting.
+ */
+void __init cpu_smt_check_topology(void)
+{
+ if (!cpu_smt_available)
+ cpu_smt_control = CPU_SMT_NOT_SUPPORTED;
+}
+
+static int __init smt_cmdline_disable(char *str)
+{
+ cpu_smt_disable(str && !strcmp(str, "force"));
+ return 0;
+}
+early_param("nosmt", smt_cmdline_disable);
+
+static inline bool cpu_smt_allowed(unsigned int cpu)
+{
+ if (topology_is_primary_thread(cpu))
+ return true;
+
+ /*
+ * If the CPU is not a 'primary' thread and the booted_once bit is
+ * set then the processor has SMT support. Store this information
+ * for the late check of SMT support in cpu_smt_check_topology().
+ */
+ if (per_cpu(cpuhp_state, cpu).booted_once)
+ cpu_smt_available = true;
+
+ if (cpu_smt_control == CPU_SMT_ENABLED)
+ return true;
+
+ /*
+ * On x86 it's required to boot all logical CPUs at least once so
+ * that the init code can get a chance to set CR4.MCE on each
+ * CPU. Otherwise, a broadacasted MCE observing CR4.MCE=0b on any
+ * core will shutdown the machine.
+ */
+ return !per_cpu(cpuhp_state, cpu).booted_once;
+}
+#else
+static inline bool cpu_smt_allowed(unsigned int cpu) { return true; }
+#endif
+
static inline enum cpuhp_state
cpuhp_set_state(struct cpuhp_cpu_state *st, enum cpuhp_state target)
{
@@ -422,6 +508,16 @@ static int bringup_wait_for_ap(unsigned int cpu)
stop_machine_unpark(cpu);
kthread_unpark(st->thread);
+ /*
+ * SMT soft disabling on X86 requires to bring the CPU out of the
+ * BIOS 'wait for SIPI' state in order to set the CR4.MCE bit. The
+ * CPU marked itself as booted_once in cpu_notify_starting() so the
+ * cpu_smt_allowed() check will now return false if this is not the
+ * primary sibling.
+ */
+ if (!cpu_smt_allowed(cpu))
+ return -ECANCELED;
+
if (st->target <= CPUHP_AP_ONLINE_IDLE)
return 0;
@@ -754,7 +850,6 @@ static int takedown_cpu(unsigned int cpu)
/* Park the smpboot threads */
kthread_park(per_cpu_ptr(&cpuhp_state, cpu)->thread);
- smpboot_park_threads(cpu);
/*
* Prevent irq alloc/free while the dying cpu reorganizes the
@@ -907,20 +1002,19 @@ out:
return ret;
}
+static int cpu_down_maps_locked(unsigned int cpu, enum cpuhp_state target)
+{
+ if (cpu_hotplug_disabled)
+ return -EBUSY;
+ return _cpu_down(cpu, 0, target);
+}
+
static int do_cpu_down(unsigned int cpu, enum cpuhp_state target)
{
int err;
cpu_maps_update_begin();
-
- if (cpu_hotplug_disabled) {
- err = -EBUSY;
- goto out;
- }
-
- err = _cpu_down(cpu, 0, target);
-
-out:
+ err = cpu_down_maps_locked(cpu, target);
cpu_maps_update_done();
return err;
}
@@ -949,6 +1043,7 @@ void notify_cpu_starting(unsigned int cpu)
int ret;
rcu_cpu_starting(cpu); /* Enables RCU usage on this CPU. */
+ st->booted_once = true;
while (st->state < target) {
st->state++;
ret = cpuhp_invoke_callback(cpu, st->state, true, NULL, NULL);
@@ -1058,6 +1153,10 @@ static int do_cpu_up(unsigned int cpu, enum cpuhp_state target)
err = -EBUSY;
goto out;
}
+ if (!cpu_smt_allowed(cpu)) {
+ err = -EPERM;
+ goto out;
+ }
err = _cpu_up(cpu, 0, target);
out:
@@ -1274,7 +1373,7 @@ static struct cpuhp_step cpuhp_hp_states[] = {
* otherwise a RCU stall occurs.
*/
[CPUHP_TIMERS_PREPARE] = {
- .name = "timers:dead",
+ .name = "timers:prepare",
.startup.single = timers_prepare_cpu,
.teardown.single = timers_dead_cpu,
},
@@ -1332,7 +1431,7 @@ static struct cpuhp_step cpuhp_hp_states[] = {
[CPUHP_AP_SMPBOOT_THREADS] = {
.name = "smpboot/threads:online",
.startup.single = smpboot_unpark_threads,
- .teardown.single = NULL,
+ .teardown.single = smpboot_park_threads,
},
[CPUHP_AP_IRQ_AFFINITY_ONLINE] = {
.name = "irq/affinity:online",
@@ -1344,6 +1443,11 @@ static struct cpuhp_step cpuhp_hp_states[] = {
.startup.single = perf_event_init_cpu,
.teardown.single = perf_event_exit_cpu,
},
+ [CPUHP_AP_WATCHDOG_ONLINE] = {
+ .name = "lockup_detector:online",
+ .startup.single = lockup_detector_online_cpu,
+ .teardown.single = lockup_detector_offline_cpu,
+ },
[CPUHP_AP_WORKQUEUE_ONLINE] = {
.name = "workqueue:online",
.startup.single = workqueue_online_cpu,
@@ -1906,10 +2010,172 @@ static const struct attribute_group cpuhp_cpu_root_attr_group = {
NULL
};
+#ifdef CONFIG_HOTPLUG_SMT
+
+static const char *smt_states[] = {
+ [CPU_SMT_ENABLED] = "on",
+ [CPU_SMT_DISABLED] = "off",
+ [CPU_SMT_FORCE_DISABLED] = "forceoff",
+ [CPU_SMT_NOT_SUPPORTED] = "notsupported",
+};
+
+static ssize_t
+show_smt_control(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE - 2, "%s\n", smt_states[cpu_smt_control]);
+}
+
+static void cpuhp_offline_cpu_device(unsigned int cpu)
+{
+ struct device *dev = get_cpu_device(cpu);
+
+ dev->offline = true;
+ /* Tell user space about the state change */
+ kobject_uevent(&dev->kobj, KOBJ_OFFLINE);
+}
+
+static void cpuhp_online_cpu_device(unsigned int cpu)
+{
+ struct device *dev = get_cpu_device(cpu);
+
+ dev->offline = false;
+ /* Tell user space about the state change */
+ kobject_uevent(&dev->kobj, KOBJ_ONLINE);
+}
+
+static int cpuhp_smt_disable(enum cpuhp_smt_control ctrlval)
+{
+ int cpu, ret = 0;
+
+ cpu_maps_update_begin();
+ for_each_online_cpu(cpu) {
+ if (topology_is_primary_thread(cpu))
+ continue;
+ ret = cpu_down_maps_locked(cpu, CPUHP_OFFLINE);
+ if (ret)
+ break;
+ /*
+ * As this needs to hold the cpu maps lock it's impossible
+ * to call device_offline() because that ends up calling
+ * cpu_down() which takes cpu maps lock. cpu maps lock
+ * needs to be held as this might race against in kernel
+ * abusers of the hotplug machinery (thermal management).
+ *
+ * So nothing would update device:offline state. That would
+ * leave the sysfs entry stale and prevent onlining after
+ * smt control has been changed to 'off' again. This is
+ * called under the sysfs hotplug lock, so it is properly
+ * serialized against the regular offline usage.
+ */
+ cpuhp_offline_cpu_device(cpu);
+ }
+ if (!ret)
+ cpu_smt_control = ctrlval;
+ cpu_maps_update_done();
+ return ret;
+}
+
+static int cpuhp_smt_enable(void)
+{
+ int cpu, ret = 0;
+
+ cpu_maps_update_begin();
+ cpu_smt_control = CPU_SMT_ENABLED;
+ for_each_present_cpu(cpu) {
+ /* Skip online CPUs and CPUs on offline nodes */
+ if (cpu_online(cpu) || !node_online(cpu_to_node(cpu)))
+ continue;
+ ret = _cpu_up(cpu, 0, CPUHP_ONLINE);
+ if (ret)
+ break;
+ /* See comment in cpuhp_smt_disable() */
+ cpuhp_online_cpu_device(cpu);
+ }
+ cpu_maps_update_done();
+ return ret;
+}
+
+static ssize_t
+store_smt_control(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ctrlval, ret;
+
+ if (sysfs_streq(buf, "on"))
+ ctrlval = CPU_SMT_ENABLED;
+ else if (sysfs_streq(buf, "off"))
+ ctrlval = CPU_SMT_DISABLED;
+ else if (sysfs_streq(buf, "forceoff"))
+ ctrlval = CPU_SMT_FORCE_DISABLED;
+ else
+ return -EINVAL;
+
+ if (cpu_smt_control == CPU_SMT_FORCE_DISABLED)
+ return -EPERM;
+
+ if (cpu_smt_control == CPU_SMT_NOT_SUPPORTED)
+ return -ENODEV;
+
+ ret = lock_device_hotplug_sysfs();
+ if (ret)
+ return ret;
+
+ if (ctrlval != cpu_smt_control) {
+ switch (ctrlval) {
+ case CPU_SMT_ENABLED:
+ ret = cpuhp_smt_enable();
+ break;
+ case CPU_SMT_DISABLED:
+ case CPU_SMT_FORCE_DISABLED:
+ ret = cpuhp_smt_disable(ctrlval);
+ break;
+ }
+ }
+
+ unlock_device_hotplug();
+ return ret ? ret : count;
+}
+static DEVICE_ATTR(control, 0644, show_smt_control, store_smt_control);
+
+static ssize_t
+show_smt_active(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ bool active = topology_max_smt_threads() > 1;
+
+ return snprintf(buf, PAGE_SIZE - 2, "%d\n", active);
+}
+static DEVICE_ATTR(active, 0444, show_smt_active, NULL);
+
+static struct attribute *cpuhp_smt_attrs[] = {
+ &dev_attr_control.attr,
+ &dev_attr_active.attr,
+ NULL
+};
+
+static const struct attribute_group cpuhp_smt_attr_group = {
+ .attrs = cpuhp_smt_attrs,
+ .name = "smt",
+ NULL
+};
+
+static int __init cpu_smt_state_init(void)
+{
+ return sysfs_create_group(&cpu_subsys.dev_root->kobj,
+ &cpuhp_smt_attr_group);
+}
+
+#else
+static inline int cpu_smt_state_init(void) { return 0; }
+#endif
+
static int __init cpuhp_sysfs_init(void)
{
int cpu, ret;
+ ret = cpu_smt_state_init();
+ if (ret)
+ return ret;
+
ret = sysfs_create_group(&cpu_subsys.dev_root->kobj,
&cpuhp_cpu_root_attr_group);
if (ret)
@@ -2010,7 +2276,10 @@ void __init boot_cpu_init(void)
/*
* Must be called _AFTER_ setting up the per_cpu areas
*/
-void __init boot_cpu_state_init(void)
+void __init boot_cpu_hotplug_init(void)
{
- per_cpu_ptr(&cpuhp_state, smp_processor_id())->state = CPUHP_ONLINE;
+#ifdef CONFIG_SMP
+ this_cpu_write(cpuhp_state.booted_once, true);
+#endif
+ this_cpu_write(cpuhp_state.state, CPUHP_ONLINE);
}