diff options
Diffstat (limited to 'kernel/time/hrtimer.c')
| -rw-r--r-- | kernel/time/hrtimer.c | 901 |
1 files changed, 521 insertions, 380 deletions
diff --git a/kernel/time/hrtimer.c b/kernel/time/hrtimer.c index 743c852e10f2..deb1aa32814e 100644 --- a/kernel/time/hrtimer.c +++ b/kernel/time/hrtimer.c @@ -38,6 +38,7 @@ #include <linux/sched/deadline.h> #include <linux/sched/nohz.h> #include <linux/sched/debug.h> +#include <linux/sched/isolation.h> #include <linux/timer.h> #include <linux/freezer.h> #include <linux/compat.h> @@ -57,6 +58,8 @@ #define HRTIMER_ACTIVE_SOFT (HRTIMER_ACTIVE_HARD << MASK_SHIFT) #define HRTIMER_ACTIVE_ALL (HRTIMER_ACTIVE_SOFT | HRTIMER_ACTIVE_HARD) +static void retrigger_next_event(void *arg); + /* * The timer bases: * @@ -110,7 +113,8 @@ DEFINE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases) = .clockid = CLOCK_TAI, .get_time = &ktime_get_clocktai, }, - } + }, + .csd = CSD_INIT(retrigger_next_event, NULL) }; static const int hrtimer_clock_to_base_table[MAX_CLOCKS] = { @@ -123,6 +127,14 @@ static const int hrtimer_clock_to_base_table[MAX_CLOCKS] = { [CLOCK_TAI] = HRTIMER_BASE_TAI, }; +static inline bool hrtimer_base_is_online(struct hrtimer_cpu_base *base) +{ + if (!IS_ENABLED(CONFIG_HOTPLUG_CPU)) + return true; + else + return likely(base->online); +} + /* * Functions and macros which are different for UP/SMP systems are kept in a * single place @@ -144,11 +156,6 @@ static struct hrtimer_cpu_base migration_cpu_base = { #define migration_base migration_cpu_base.clock_base[0] -static inline bool is_migration_base(struct hrtimer_clock_base *base) -{ - return base == &migration_base; -} - /* * We are using hashed locking: holding per_cpu(hrtimer_bases)[n].lock * means that all timers which are tied to this base via timer->base are @@ -164,6 +171,7 @@ static inline bool is_migration_base(struct hrtimer_clock_base *base) static struct hrtimer_clock_base *lock_hrtimer_base(const struct hrtimer *timer, unsigned long *flags) + __acquires(&timer->base->lock) { struct hrtimer_clock_base *base; @@ -181,27 +189,54 @@ struct hrtimer_clock_base *lock_hrtimer_base(const struct hrtimer *timer, } /* - * We do not migrate the timer when it is expiring before the next - * event on the target cpu. When high resolution is enabled, we cannot - * reprogram the target cpu hardware and we would cause it to fire - * late. To keep it simple, we handle the high resolution enabled and - * disabled case similar. + * Check if the elected target is suitable considering its next + * event and the hotplug state of the current CPU. + * + * If the elected target is remote and its next event is after the timer + * to queue, then a remote reprogram is necessary. However there is no + * guarantee the IPI handling the operation would arrive in time to meet + * the high resolution deadline. In this case the local CPU becomes a + * preferred target, unless it is offline. + * + * High and low resolution modes are handled the same way for simplicity. * * Called with cpu_base->lock of target cpu held. */ -static int -hrtimer_check_target(struct hrtimer *timer, struct hrtimer_clock_base *new_base) +static bool hrtimer_suitable_target(struct hrtimer *timer, struct hrtimer_clock_base *new_base, + struct hrtimer_cpu_base *new_cpu_base, + struct hrtimer_cpu_base *this_cpu_base) { ktime_t expires; + /* + * The local CPU clockevent can be reprogrammed. Also get_target_base() + * guarantees it is online. + */ + if (new_cpu_base == this_cpu_base) + return true; + + /* + * The offline local CPU can't be the default target if the + * next remote target event is after this timer. Keep the + * elected new base. An IPI will we issued to reprogram + * it as a last resort. + */ + if (!hrtimer_base_is_online(this_cpu_base)) + return true; + expires = ktime_sub(hrtimer_get_expires(timer), new_base->offset); - return expires < new_base->cpu_base->expires_next; + + return expires >= new_base->cpu_base->expires_next; } -static inline -struct hrtimer_cpu_base *get_target_base(struct hrtimer_cpu_base *base, - int pinned) +static inline struct hrtimer_cpu_base *get_target_base(struct hrtimer_cpu_base *base, int pinned) { + if (!hrtimer_base_is_online(base)) { + int cpu = cpumask_any_and(cpu_online_mask, housekeeping_cpumask(HK_TYPE_TIMER)); + + return &per_cpu(hrtimer_bases, cpu); + } + #if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ_COMMON) if (static_branch_likely(&timers_migration_enabled) && !pinned) return &per_cpu(hrtimer_bases, get_nohz_timer_target()); @@ -252,8 +287,8 @@ again: raw_spin_unlock(&base->cpu_base->lock); raw_spin_lock(&new_base->cpu_base->lock); - if (new_cpu_base != this_cpu_base && - hrtimer_check_target(timer, new_base)) { + if (!hrtimer_suitable_target(timer, new_base, new_cpu_base, + this_cpu_base)) { raw_spin_unlock(&new_base->cpu_base->lock); raw_spin_lock(&base->cpu_base->lock); new_cpu_base = this_cpu_base; @@ -262,8 +297,7 @@ again: } WRITE_ONCE(timer->base, new_base); } else { - if (new_cpu_base != this_cpu_base && - hrtimer_check_target(timer, new_base)) { + if (!hrtimer_suitable_target(timer, new_base, new_cpu_base, this_cpu_base)) { new_cpu_base = this_cpu_base; goto again; } @@ -273,13 +307,9 @@ again: #else /* CONFIG_SMP */ -static inline bool is_migration_base(struct hrtimer_clock_base *base) -{ - return false; -} - static inline struct hrtimer_clock_base * lock_hrtimer_base(const struct hrtimer *timer, unsigned long *flags) + __acquires(&timer->base->cpu_base->lock) { struct hrtimer_clock_base *base = timer->base; @@ -414,6 +444,11 @@ static inline void debug_hrtimer_init(struct hrtimer *timer) debug_object_init(timer, &hrtimer_debug_descr); } +static inline void debug_hrtimer_init_on_stack(struct hrtimer *timer) +{ + debug_object_init_on_stack(timer, &hrtimer_debug_descr); +} + static inline void debug_hrtimer_activate(struct hrtimer *timer, enum hrtimer_mode mode) { @@ -425,28 +460,6 @@ static inline void debug_hrtimer_deactivate(struct hrtimer *timer) debug_object_deactivate(timer, &hrtimer_debug_descr); } -static void __hrtimer_init(struct hrtimer *timer, clockid_t clock_id, - enum hrtimer_mode mode); - -void hrtimer_init_on_stack(struct hrtimer *timer, clockid_t clock_id, - enum hrtimer_mode mode) -{ - debug_object_init_on_stack(timer, &hrtimer_debug_descr); - __hrtimer_init(timer, clock_id, mode); -} -EXPORT_SYMBOL_GPL(hrtimer_init_on_stack); - -static void __hrtimer_init_sleeper(struct hrtimer_sleeper *sl, - clockid_t clock_id, enum hrtimer_mode mode); - -void hrtimer_init_sleeper_on_stack(struct hrtimer_sleeper *sl, - clockid_t clock_id, enum hrtimer_mode mode) -{ - debug_object_init_on_stack(&sl->timer, &hrtimer_debug_descr); - __hrtimer_init_sleeper(sl, clock_id, mode); -} -EXPORT_SYMBOL_GPL(hrtimer_init_sleeper_on_stack); - void destroy_hrtimer_on_stack(struct hrtimer *timer) { debug_object_free(timer, &hrtimer_debug_descr); @@ -456,6 +469,7 @@ EXPORT_SYMBOL_GPL(destroy_hrtimer_on_stack); #else static inline void debug_hrtimer_init(struct hrtimer *timer) { } +static inline void debug_hrtimer_init_on_stack(struct hrtimer *timer) { } static inline void debug_hrtimer_activate(struct hrtimer *timer, enum hrtimer_mode mode) { } static inline void debug_hrtimer_deactivate(struct hrtimer *timer) { } @@ -469,6 +483,13 @@ debug_init(struct hrtimer *timer, clockid_t clockid, trace_hrtimer_init(timer, clockid, mode); } +static inline void debug_init_on_stack(struct hrtimer *timer, clockid_t clockid, + enum hrtimer_mode mode) +{ + debug_hrtimer_init_on_stack(timer); + trace_hrtimer_init(timer, clockid, mode); +} + static inline void debug_activate(struct hrtimer *timer, enum hrtimer_mode mode) { @@ -546,8 +567,11 @@ static ktime_t __hrtimer_next_event_base(struct hrtimer_cpu_base *cpu_base, } /* - * Recomputes cpu_base::*next_timer and returns the earliest expires_next but - * does not set cpu_base::*expires_next, that is done by hrtimer_reprogram. + * Recomputes cpu_base::*next_timer and returns the earliest expires_next + * but does not set cpu_base::*expires_next, that is done by + * hrtimer[_force]_reprogram and hrtimer_interrupt only. When updating + * cpu_base::*expires_next right away, reprogramming logic would no longer + * work. * * When a softirq is pending, we can ignore the HRTIMER_ACTIVE_SOFT bases, * those timers will get run whenever the softirq gets handled, at the end of @@ -588,6 +612,37 @@ __hrtimer_get_next_event(struct hrtimer_cpu_base *cpu_base, unsigned int active_ return expires_next; } +static ktime_t hrtimer_update_next_event(struct hrtimer_cpu_base *cpu_base) +{ + ktime_t expires_next, soft = KTIME_MAX; + + /* + * If the soft interrupt has already been activated, ignore the + * soft bases. They will be handled in the already raised soft + * interrupt. + */ + if (!cpu_base->softirq_activated) { + soft = __hrtimer_get_next_event(cpu_base, HRTIMER_ACTIVE_SOFT); + /* + * Update the soft expiry time. clock_settime() might have + * affected it. + */ + cpu_base->softirq_expires_next = soft; + } + + expires_next = __hrtimer_get_next_event(cpu_base, HRTIMER_ACTIVE_HARD); + /* + * If a softirq timer is expiring first, update cpu_base->next_timer + * and program the hardware with the soft expiry time. + */ + if (expires_next > soft) { + cpu_base->next_timer = cpu_base->softirq_next_timer; + expires_next = soft; + } + + return expires_next; +} + static inline ktime_t hrtimer_update_base(struct hrtimer_cpu_base *base) { ktime_t *offs_real = &base->clock_base[HRTIMER_BASE_REALTIME].offset; @@ -607,48 +662,16 @@ static inline ktime_t hrtimer_update_base(struct hrtimer_cpu_base *base) /* * Is the high resolution mode active ? */ -static inline int __hrtimer_hres_active(struct hrtimer_cpu_base *cpu_base) +static inline int hrtimer_hres_active(struct hrtimer_cpu_base *cpu_base) { return IS_ENABLED(CONFIG_HIGH_RES_TIMERS) ? cpu_base->hres_active : 0; } -static inline int hrtimer_hres_active(void) -{ - return __hrtimer_hres_active(this_cpu_ptr(&hrtimer_bases)); -} - -/* - * Reprogram the event source with checking both queues for the - * next event - * Called with interrupts disabled and base->lock held - */ -static void -hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base, int skip_equal) +static void __hrtimer_reprogram(struct hrtimer_cpu_base *cpu_base, + struct hrtimer *next_timer, + ktime_t expires_next) { - ktime_t expires_next; - - /* - * Find the current next expiration time. - */ - expires_next = __hrtimer_get_next_event(cpu_base, HRTIMER_ACTIVE_ALL); - - if (cpu_base->next_timer && cpu_base->next_timer->is_soft) { - /* - * When the softirq is activated, hrtimer has to be - * programmed with the first hard hrtimer because soft - * timer interrupt could occur too late. - */ - if (cpu_base->softirq_activated) - expires_next = __hrtimer_get_next_event(cpu_base, - HRTIMER_ACTIVE_HARD); - else - cpu_base->softirq_expires_next = expires_next; - } - - if (skip_equal && expires_next == cpu_base->expires_next) - return; - cpu_base->expires_next = expires_next; /* @@ -665,13 +688,31 @@ hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base, int skip_equal) * T1 is removed, so this code is called and would reprogram * the hardware to 5s from now. Any hrtimer_start after that * will not reprogram the hardware due to hang_detected being - * set. So we'd effectivly block all timers until the T2 event + * set. So we'd effectively block all timers until the T2 event * fires. */ - if (!__hrtimer_hres_active(cpu_base) || cpu_base->hang_detected) + if (!hrtimer_hres_active(cpu_base) || cpu_base->hang_detected) return; - tick_program_event(cpu_base->expires_next, 1); + tick_program_event(expires_next, 1); +} + +/* + * Reprogram the event source with checking both queues for the + * next event + * Called with interrupts disabled and base->lock held + */ +static void +hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base, int skip_equal) +{ + ktime_t expires_next; + + expires_next = hrtimer_update_next_event(cpu_base); + + if (skip_equal && expires_next == cpu_base->expires_next) + return; + + __hrtimer_reprogram(cpu_base, cpu_base->next_timer, expires_next); } /* High resolution timer related functions */ @@ -703,24 +744,6 @@ static inline int hrtimer_is_hres_enabled(void) } /* - * Retrigger next event is called after clock was set - * - * Called with interrupts disabled via on_each_cpu() - */ -static void retrigger_next_event(void *arg) -{ - struct hrtimer_cpu_base *base = this_cpu_ptr(&hrtimer_bases); - - if (!__hrtimer_hres_active(base)) - return; - - raw_spin_lock(&base->lock); - hrtimer_update_base(base); - hrtimer_force_reprogram(base, 0); - raw_spin_unlock(&base->lock); -} - -/* * Switch to high resolution mode */ static void hrtimer_switch_to_hres(void) @@ -735,34 +758,59 @@ static void hrtimer_switch_to_hres(void) base->hres_active = 1; hrtimer_resolution = HIGH_RES_NSEC; - tick_setup_sched_timer(); + tick_setup_sched_timer(true); /* "Retrigger" the interrupt to get things going */ retrigger_next_event(NULL); } -static void clock_was_set_work(struct work_struct *work) -{ - clock_was_set(); -} +#else -static DECLARE_WORK(hrtimer_work, clock_was_set_work); +static inline int hrtimer_is_hres_enabled(void) { return 0; } +static inline void hrtimer_switch_to_hres(void) { } +#endif /* CONFIG_HIGH_RES_TIMERS */ /* - * Called from timekeeping and resume code to reprogram the hrtimer - * interrupt device on all cpus. + * Retrigger next event is called after clock was set with interrupts + * disabled through an SMP function call or directly from low level + * resume code. + * + * This is only invoked when: + * - CONFIG_HIGH_RES_TIMERS is enabled. + * - CONFIG_NOHZ_COMMON is enabled + * + * For the other cases this function is empty and because the call sites + * are optimized out it vanishes as well, i.e. no need for lots of + * #ifdeffery. */ -void clock_was_set_delayed(void) +static void retrigger_next_event(void *arg) { - schedule_work(&hrtimer_work); -} - -#else + struct hrtimer_cpu_base *base = this_cpu_ptr(&hrtimer_bases); -static inline int hrtimer_is_hres_enabled(void) { return 0; } -static inline void hrtimer_switch_to_hres(void) { } -static inline void retrigger_next_event(void *arg) { } + /* + * When high resolution mode or nohz is active, then the offsets of + * CLOCK_REALTIME/TAI/BOOTTIME have to be updated. Otherwise the + * next tick will take care of that. + * + * If high resolution mode is active then the next expiring timer + * must be reevaluated and the clock event device reprogrammed if + * necessary. + * + * In the NOHZ case the update of the offset and the reevaluation + * of the next expiring timer is enough. The return from the SMP + * function call will take care of the reprogramming in case the + * CPU was in a NOHZ idle sleep. + */ + if (!hrtimer_hres_active(base) && !tick_nohz_active) + return; -#endif /* CONFIG_HIGH_RES_TIMERS */ + raw_spin_lock(&base->lock); + hrtimer_update_base(base); + if (hrtimer_hres_active(base)) + hrtimer_force_reprogram(base, 0); + else + hrtimer_update_next_event(base); + raw_spin_unlock(&base->lock); +} /* * When a timer is enqueued and expires earlier than the already enqueued @@ -817,75 +865,161 @@ static void hrtimer_reprogram(struct hrtimer *timer, bool reprogram) if (base->cpu_base != cpu_base) return; + if (expires >= cpu_base->expires_next) + return; + /* - * If the hrtimer interrupt is running, then it will - * reevaluate the clock bases and reprogram the clock event - * device. The callbacks are always executed in hard interrupt - * context so we don't need an extra check for a running - * callback. + * If the hrtimer interrupt is running, then it will reevaluate the + * clock bases and reprogram the clock event device. */ if (cpu_base->in_hrtirq) return; - if (expires >= cpu_base->expires_next) - return; - - /* Update the pointer to the next expiring timer */ cpu_base->next_timer = timer; - cpu_base->expires_next = expires; + + __hrtimer_reprogram(cpu_base, timer, expires); +} + +static bool update_needs_ipi(struct hrtimer_cpu_base *cpu_base, + unsigned int active) +{ + struct hrtimer_clock_base *base; + unsigned int seq; + ktime_t expires; /* - * If hres is not active, hardware does not have to be - * programmed yet. + * Update the base offsets unconditionally so the following + * checks whether the SMP function call is required works. * - * If a hang was detected in the last timer interrupt then we - * do not schedule a timer which is earlier than the expiry - * which we enforced in the hang detection. We want the system - * to make progress. + * The update is safe even when the remote CPU is in the hrtimer + * interrupt or the hrtimer soft interrupt and expiring affected + * bases. Either it will see the update before handling a base or + * it will see it when it finishes the processing and reevaluates + * the next expiring timer. */ - if (!__hrtimer_hres_active(cpu_base) || cpu_base->hang_detected) - return; + seq = cpu_base->clock_was_set_seq; + hrtimer_update_base(cpu_base); + + /* + * If the sequence did not change over the update then the + * remote CPU already handled it. + */ + if (seq == cpu_base->clock_was_set_seq) + return false; + + /* + * If the remote CPU is currently handling an hrtimer interrupt, it + * will reevaluate the first expiring timer of all clock bases + * before reprogramming. Nothing to do here. + */ + if (cpu_base->in_hrtirq) + return false; /* - * Program the timer hardware. We enforce the expiry for - * events which are already in the past. + * Walk the affected clock bases and check whether the first expiring + * timer in a clock base is moving ahead of the first expiring timer of + * @cpu_base. If so, the IPI must be invoked because per CPU clock + * event devices cannot be remotely reprogrammed. */ - tick_program_event(expires, 1); + active &= cpu_base->active_bases; + + for_each_active_base(base, cpu_base, active) { + struct timerqueue_node *next; + + next = timerqueue_getnext(&base->active); + expires = ktime_sub(next->expires, base->offset); + if (expires < cpu_base->expires_next) + return true; + + /* Extra check for softirq clock bases */ + if (base->clockid < HRTIMER_BASE_MONOTONIC_SOFT) + continue; + if (cpu_base->softirq_activated) + continue; + if (expires < cpu_base->softirq_expires_next) + return true; + } + return false; } /* - * Clock realtime was set - * - * Change the offset of the realtime clock vs. the monotonic - * clock. + * Clock was set. This might affect CLOCK_REALTIME, CLOCK_TAI and + * CLOCK_BOOTTIME (for late sleep time injection). * - * We might have to reprogram the high resolution timer interrupt. On - * SMP we call the architecture specific code to retrigger _all_ high - * resolution timer interrupts. On UP we just disable interrupts and - * call the high resolution interrupt code. + * This requires to update the offsets for these clocks + * vs. CLOCK_MONOTONIC. When high resolution timers are enabled, then this + * also requires to eventually reprogram the per CPU clock event devices + * when the change moves an affected timer ahead of the first expiring + * timer on that CPU. Obviously remote per CPU clock event devices cannot + * be reprogrammed. The other reason why an IPI has to be sent is when the + * system is in !HIGH_RES and NOHZ mode. The NOHZ mode updates the offsets + * in the tick, which obviously might be stopped, so this has to bring out + * the remote CPU which might sleep in idle to get this sorted. */ -void clock_was_set(void) +void clock_was_set(unsigned int bases) { -#ifdef CONFIG_HIGH_RES_TIMERS - /* Retrigger the CPU local events everywhere */ - on_each_cpu(retrigger_next_event, NULL, 1); -#endif + struct hrtimer_cpu_base *cpu_base = raw_cpu_ptr(&hrtimer_bases); + cpumask_var_t mask; + int cpu; + + if (!hrtimer_hres_active(cpu_base) && !tick_nohz_active) + goto out_timerfd; + + if (!zalloc_cpumask_var(&mask, GFP_KERNEL)) { + on_each_cpu(retrigger_next_event, NULL, 1); + goto out_timerfd; + } + + /* Avoid interrupting CPUs if possible */ + cpus_read_lock(); + for_each_online_cpu(cpu) { + unsigned long flags; + + cpu_base = &per_cpu(hrtimer_bases, cpu); + raw_spin_lock_irqsave(&cpu_base->lock, flags); + + if (update_needs_ipi(cpu_base, bases)) + cpumask_set_cpu(cpu, mask); + + raw_spin_unlock_irqrestore(&cpu_base->lock, flags); + } + + preempt_disable(); + smp_call_function_many(mask, retrigger_next_event, NULL, 1); + preempt_enable(); + cpus_read_unlock(); + free_cpumask_var(mask); + +out_timerfd: timerfd_clock_was_set(); } +static void clock_was_set_work(struct work_struct *work) +{ + clock_was_set(CLOCK_SET_WALL); +} + +static DECLARE_WORK(hrtimer_work, clock_was_set_work); + +/* + * Called from timekeeping code to reprogram the hrtimer interrupt device + * on all cpus and to notify timerfd. + */ +void clock_was_set_delayed(void) +{ + schedule_work(&hrtimer_work); +} + /* - * During resume we might have to reprogram the high resolution timer - * interrupt on all online CPUs. However, all other CPUs will be - * stopped with IRQs interrupts disabled so the clock_was_set() call - * must be deferred. + * Called during resume either directly from via timekeeping_resume() + * or in the case of s2idle from tick_unfreeze() to ensure that the + * hrtimers are up to date. */ -void hrtimers_resume(void) +void hrtimers_resume_local(void) { lockdep_assert_irqs_disabled(); /* Retrigger on the local CPU */ retrigger_next_event(NULL); - /* And schedule a retrigger for all others */ - clock_was_set_delayed(); } /* @@ -893,26 +1027,29 @@ void hrtimers_resume(void) */ static inline void unlock_hrtimer_base(const struct hrtimer *timer, unsigned long *flags) + __releases(&timer->base->cpu_base->lock) { raw_spin_unlock_irqrestore(&timer->base->cpu_base->lock, *flags); } /** - * hrtimer_forward - forward the timer expiry + * hrtimer_forward() - forward the timer expiry * @timer: hrtimer to forward * @now: forward past this time * @interval: the interval to forward * * Forward the timer expiry so it will expire in the future. - * Returns the number of overruns. * - * Can be safely called from the callback function of @timer. If - * called from other contexts @timer must neither be enqueued nor - * running the callback and the caller needs to take care of - * serialization. + * .. note:: + * This only updates the timer expiry value and does not requeue the timer. + * + * There is also a variant of the function hrtimer_forward_now(). + * + * Context: Can be safely called from the callback function of @timer. If called + * from other contexts @timer must neither be enqueued nor running the + * callback and the caller needs to take care of serialization. * - * Note: This only updates the timer expiry value and does not requeue - * the timer. + * Return: The number of overruns are returned. */ u64 hrtimer_forward(struct hrtimer *timer, ktime_t now, ktime_t interval) { @@ -955,13 +1092,13 @@ EXPORT_SYMBOL_GPL(hrtimer_forward); * The timer is inserted in expiry order. Insertion into the * red black tree is O(log(n)). Must hold the base lock. * - * Returns 1 when the new timer is the leftmost timer in the tree. + * Returns true when the new timer is the leftmost timer in the tree. */ -static int enqueue_hrtimer(struct hrtimer *timer, - struct hrtimer_clock_base *base, - enum hrtimer_mode mode) +static bool enqueue_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base, + enum hrtimer_mode mode) { debug_activate(timer, mode); + WARN_ON_ONCE(!base->cpu_base->online); base->cpu_base->active_bases |= 1 << base->index; @@ -1001,7 +1138,7 @@ static void __remove_hrtimer(struct hrtimer *timer, * cpu_base->next_timer. This happens when we remove the first * timer on a remote cpu. No harm as we never dereference * cpu_base->next_timer. So the worst thing what can happen is - * an superflous call to hrtimer_force_reprogram() on the + * an superfluous call to hrtimer_force_reprogram() on the * remote cpu later on if the same timer gets enqueued again. */ if (reprogram && timer == cpu_base->next_timer) @@ -1012,12 +1149,13 @@ static void __remove_hrtimer(struct hrtimer *timer, * remove hrtimer, called with base lock held */ static inline int -remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base, bool restart) +remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base, + bool restart, bool keep_local) { u8 state = timer->state; if (state & HRTIMER_STATE_ENQUEUED) { - int reprogram; + bool reprogram; /* * Remove the timer and force reprogramming when high @@ -1030,8 +1168,16 @@ remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base, bool rest debug_deactivate(timer); reprogram = base->cpu_base == this_cpu_ptr(&hrtimer_bases); + /* + * If the timer is not restarted then reprogramming is + * required if the timer is local. If it is local and about + * to be restarted, avoid programming it twice (on removal + * and a moment later when it's requeued). + */ if (!restart) state = HRTIMER_STATE_INACTIVE; + else + reprogram &= !keep_local; __remove_hrtimer(timer, base, state, reprogram); return 1; @@ -1046,7 +1192,7 @@ static inline ktime_t hrtimer_update_lowres(struct hrtimer *timer, ktime_t tim, /* * CONFIG_TIME_LOW_RES indicates that the system has no way to return * granular time values. For relative timers we add hrtimer_resolution - * (i.e. one jiffie) to prevent short timeouts. + * (i.e. one jiffy) to prevent short timeouts. */ timer->is_rel = mode & HRTIMER_MODE_REL; if (timer->is_rel) @@ -1084,10 +1230,39 @@ static int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim, u64 delta_ns, const enum hrtimer_mode mode, struct hrtimer_clock_base *base) { + struct hrtimer_cpu_base *this_cpu_base = this_cpu_ptr(&hrtimer_bases); struct hrtimer_clock_base *new_base; + bool force_local, first; - /* Remove an active timer from the queue: */ - remove_hrtimer(timer, base, true); + /* + * If the timer is on the local cpu base and is the first expiring + * timer then this might end up reprogramming the hardware twice + * (on removal and on enqueue). To avoid that by prevent the + * reprogram on removal, keep the timer local to the current CPU + * and enforce reprogramming after it is queued no matter whether + * it is the new first expiring timer again or not. + */ + force_local = base->cpu_base == this_cpu_base; + force_local &= base->cpu_base->next_timer == timer; + + /* + * Don't force local queuing if this enqueue happens on a unplugged + * CPU after hrtimer_cpu_dying() has been invoked. + */ + force_local &= this_cpu_base->online; + + /* + * Remove an active timer from the queue. In case it is not queued + * on the current CPU, make sure that remove_hrtimer() updates the + * remote data correctly. + * + * If it's on the current CPU and the first expiring timer, then + * skip reprogramming, keep the timer local and enforce + * reprogramming later if it was the first expiring timer. This + * avoids programming the underlying clock event twice (once at + * removal and once after enqueue). + */ + remove_hrtimer(timer, base, true, force_local); if (mode & HRTIMER_MODE_REL) tim = ktime_add_safe(tim, base->get_time()); @@ -1097,9 +1272,43 @@ static int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim, hrtimer_set_expires_range_ns(timer, tim, delta_ns); /* Switch the timer base, if necessary: */ - new_base = switch_hrtimer_base(timer, base, mode & HRTIMER_MODE_PINNED); + if (!force_local) { + new_base = switch_hrtimer_base(timer, base, + mode & HRTIMER_MODE_PINNED); + } else { + new_base = base; + } + + first = enqueue_hrtimer(timer, new_base, mode); + if (!force_local) { + /* + * If the current CPU base is online, then the timer is + * never queued on a remote CPU if it would be the first + * expiring timer there. + */ + if (hrtimer_base_is_online(this_cpu_base)) + return first; + + /* + * Timer was enqueued remote because the current base is + * already offline. If the timer is the first to expire, + * kick the remote CPU to reprogram the clock event. + */ + if (first) { + struct hrtimer_cpu_base *new_cpu_base = new_base->cpu_base; - return enqueue_hrtimer(timer, new_base, mode); + smp_call_function_single_async(new_cpu_base->cpu, &new_cpu_base->csd); + } + return 0; + } + + /* + * Timer was forced to stay on the current CPU to avoid + * reprogramming on removal and enqueue. Force reprogram the + * hardware by evaluating the new first expiring timer. + */ + hrtimer_force_reprogram(new_base->cpu_base, 1); + return 0; } /** @@ -1117,6 +1326,8 @@ void hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim, struct hrtimer_clock_base *base; unsigned long flags; + if (WARN_ON_ONCE(!timer->function)) + return; /* * Check whether the HRTIMER_MODE_SOFT bit and hrtimer.is_soft * match on CONFIG_PREEMPT_RT = n. With PREEMPT_RT check the hard @@ -1165,7 +1376,7 @@ int hrtimer_try_to_cancel(struct hrtimer *timer) base = lock_hrtimer_base(timer, &flags); if (!hrtimer_callback_running(timer)) - ret = remove_hrtimer(timer, base, false); + ret = remove_hrtimer(timer, base, false, false); unlock_hrtimer_base(timer, &flags); @@ -1181,11 +1392,13 @@ static void hrtimer_cpu_base_init_expiry_lock(struct hrtimer_cpu_base *base) } static void hrtimer_cpu_base_lock_expiry(struct hrtimer_cpu_base *base) + __acquires(&base->softirq_expiry_lock) { spin_lock(&base->softirq_expiry_lock); } static void hrtimer_cpu_base_unlock_expiry(struct hrtimer_cpu_base *base) + __releases(&base->softirq_expiry_lock) { spin_unlock(&base->softirq_expiry_lock); } @@ -1194,7 +1407,7 @@ static void hrtimer_cpu_base_unlock_expiry(struct hrtimer_cpu_base *base) * The counterpart to hrtimer_cancel_wait_running(). * * If there is a waiter for cpu_base->expiry_lock, then it was waiting for - * the timer callback to finish. Drop expiry_lock and reaquire it. That + * the timer callback to finish. Drop expiry_lock and reacquire it. That * allows the waiter to acquire the lock and make progress. */ static void hrtimer_sync_wait_running(struct hrtimer_cpu_base *cpu_base, @@ -1208,6 +1421,18 @@ static void hrtimer_sync_wait_running(struct hrtimer_cpu_base *cpu_base, } } +#ifdef CONFIG_SMP +static __always_inline bool is_migration_base(struct hrtimer_clock_base *base) +{ + return base == &migration_base; +} +#else +static __always_inline bool is_migration_base(struct hrtimer_clock_base *base) +{ + return false; +} +#endif + /* * This function is called on PREEMPT_RT kernels when the fast path * deletion of a timer failed because the timer callback function was @@ -1318,7 +1543,7 @@ u64 hrtimer_get_next_event(void) raw_spin_lock_irqsave(&cpu_base->lock, flags); - if (!__hrtimer_hres_active(cpu_base)) + if (!hrtimer_hres_active(cpu_base)) expires = __hrtimer_get_next_event(cpu_base, HRTIMER_ACTIVE_ALL); raw_spin_unlock_irqrestore(&cpu_base->lock, flags); @@ -1341,7 +1566,7 @@ u64 hrtimer_next_event_without(const struct hrtimer *exclude) raw_spin_lock_irqsave(&cpu_base->lock, flags); - if (__hrtimer_hres_active(cpu_base)) { + if (hrtimer_hres_active(cpu_base)) { unsigned int active; if (!cpu_base->softirq_activated) { @@ -1372,6 +1597,11 @@ static inline int hrtimer_clockid_to_base(clockid_t clock_id) return HRTIMER_BASE_MONOTONIC; } +static enum hrtimer_restart hrtimer_dummy_timeout(struct hrtimer *unused) +{ + return HRTIMER_NORESTART; +} + static void __hrtimer_init(struct hrtimer *timer, clockid_t clock_id, enum hrtimer_mode mode) { @@ -1380,7 +1610,7 @@ static void __hrtimer_init(struct hrtimer *timer, clockid_t clock_id, int base; /* - * On PREEMPT_RT enabled kernels hrtimers which are not explicitely + * On PREEMPT_RT enabled kernels hrtimers which are not explicitly * marked for hard interrupt expiry mode are moved into soft * interrupt context for latency reasons and because the callbacks * can invoke functions which might sleep on RT, e.g. spin_lock(). @@ -1408,11 +1638,23 @@ static void __hrtimer_init(struct hrtimer *timer, clockid_t clock_id, timerqueue_init(&timer->node); } +static void __hrtimer_setup(struct hrtimer *timer, + enum hrtimer_restart (*function)(struct hrtimer *), + clockid_t clock_id, enum hrtimer_mode mode) +{ + __hrtimer_init(timer, clock_id, mode); + + if (WARN_ON_ONCE(!function)) + timer->function = hrtimer_dummy_timeout; + else + timer->function = function; +} + /** * hrtimer_init - initialize a timer to the given clock * @timer: the timer to be initialized * @clock_id: the clock to be used - * @mode: The modes which are relevant for intitialization: + * @mode: The modes which are relevant for initialization: * HRTIMER_MODE_ABS, HRTIMER_MODE_REL, HRTIMER_MODE_ABS_SOFT, * HRTIMER_MODE_REL_SOFT * @@ -1428,6 +1670,46 @@ void hrtimer_init(struct hrtimer *timer, clockid_t clock_id, } EXPORT_SYMBOL_GPL(hrtimer_init); +/** + * hrtimer_setup - initialize a timer to the given clock + * @timer: the timer to be initialized + * @function: the callback function + * @clock_id: the clock to be used + * @mode: The modes which are relevant for initialization: + * HRTIMER_MODE_ABS, HRTIMER_MODE_REL, HRTIMER_MODE_ABS_SOFT, + * HRTIMER_MODE_REL_SOFT + * + * The PINNED variants of the above can be handed in, + * but the PINNED bit is ignored as pinning happens + * when the hrtimer is started + */ +void hrtimer_setup(struct hrtimer *timer, enum hrtimer_restart (*function)(struct hrtimer *), + clockid_t clock_id, enum hrtimer_mode mode) +{ + debug_init(timer, clock_id, mode); + __hrtimer_setup(timer, function, clock_id, mode); +} +EXPORT_SYMBOL_GPL(hrtimer_setup); + +/** + * hrtimer_setup_on_stack - initialize a timer on stack memory + * @timer: The timer to be initialized + * @function: the callback function + * @clock_id: The clock to be used + * @mode: The timer mode + * + * Similar to hrtimer_setup(), except that this one must be used if struct hrtimer is in stack + * memory. + */ +void hrtimer_setup_on_stack(struct hrtimer *timer, + enum hrtimer_restart (*function)(struct hrtimer *), + clockid_t clock_id, enum hrtimer_mode mode) +{ + debug_init_on_stack(timer, clock_id, mode); + __hrtimer_setup(timer, function, clock_id, mode); +} +EXPORT_SYMBOL_GPL(hrtimer_setup_on_stack); + /* * A timer is active, when it is enqueued into the rbtree or the * callback function is running or it's in the state of being migrated @@ -1469,7 +1751,7 @@ EXPORT_SYMBOL_GPL(hrtimer_active); * insufficient for that. * * The sequence numbers are required because otherwise we could still observe - * a false negative if the read side got smeared over multiple consequtive + * a false negative if the read side got smeared over multiple consecutive * __run_hrtimer() invocations. */ @@ -1570,7 +1852,7 @@ static void __hrtimer_run_queues(struct hrtimer_cpu_base *cpu_base, ktime_t now, * minimizing wakeups, not running timers at the * earliest interrupt after their soft expiration. * This allows us to avoid using a Priority Search - * Tree, which can answer a stabbing querry for + * Tree, which can answer a stabbing query for * overlapping intervals and instead use the simple * BST we already have. * We don't add extra wakeups by delaying timers that @@ -1587,7 +1869,7 @@ static void __hrtimer_run_queues(struct hrtimer_cpu_base *cpu_base, ktime_t now, } } -static __latent_entropy void hrtimer_run_softirq(struct softirq_action *h) +static __latent_entropy void hrtimer_run_softirq(void) { struct hrtimer_cpu_base *cpu_base = this_cpu_ptr(&hrtimer_bases); unsigned long flags; @@ -1639,13 +1921,13 @@ retry: if (!ktime_before(now, cpu_base->softirq_expires_next)) { cpu_base->softirq_expires_next = KTIME_MAX; cpu_base->softirq_activated = 1; - raise_softirq_irqoff(HRTIMER_SOFTIRQ); + raise_timer_softirq(HRTIMER_SOFTIRQ); } __hrtimer_run_queues(cpu_base, now, flags, HRTIMER_ACTIVE_HARD); - /* Reevaluate the clock bases for the next expiry */ - expires_next = __hrtimer_get_next_event(cpu_base, HRTIMER_ACTIVE_ALL); + /* Reevaluate the clock bases for the [soft] next expiry */ + expires_next = hrtimer_update_next_event(cpu_base); /* * Store the new expiry value so the migration code can verify * against it. @@ -1702,25 +1984,7 @@ retry: tick_program_event(expires_next, 1); pr_warn_once("hrtimer: interrupt took %llu ns\n", ktime_to_ns(delta)); } - -/* called with interrupts disabled */ -static inline void __hrtimer_peek_ahead_timers(void) -{ - struct tick_device *td; - - if (!hrtimer_hres_active()) - return; - - td = this_cpu_ptr(&tick_cpu_device); - if (td && td->evtdev) - hrtimer_interrupt(td->evtdev); -} - -#else /* CONFIG_HIGH_RES_TIMERS */ - -static inline void __hrtimer_peek_ahead_timers(void) { } - -#endif /* !CONFIG_HIGH_RES_TIMERS */ +#endif /* !CONFIG_HIGH_RES_TIMERS */ /* * Called from run_local_timers in hardirq context every jiffy @@ -1731,7 +1995,7 @@ void hrtimer_run_queues(void) unsigned long flags; ktime_t now; - if (__hrtimer_hres_active(cpu_base)) + if (hrtimer_hres_active(cpu_base)) return; /* @@ -1752,7 +2016,7 @@ void hrtimer_run_queues(void) if (!ktime_before(now, cpu_base->softirq_expires_next)) { cpu_base->softirq_expires_next = KTIME_MAX; cpu_base->softirq_activated = 1; - raise_softirq_irqoff(HRTIMER_SOFTIRQ); + raise_timer_softirq(HRTIMER_SOFTIRQ); } __hrtimer_run_queues(cpu_base, now, flags, HRTIMER_ACTIVE_HARD); @@ -1790,7 +2054,7 @@ void hrtimer_sleeper_start_expires(struct hrtimer_sleeper *sl, * Make the enqueue delivery mode check work on RT. If the sleeper * was initialized for hard interrupt delivery, force the mode bit. * This is a special case for hrtimer_sleepers because - * hrtimer_init_sleeper() determines the delivery mode on RT so the + * __hrtimer_init_sleeper() determines the delivery mode on RT so the * fiddling with this decision is avoided at the call sites. */ if (IS_ENABLED(CONFIG_PREEMPT_RT) && sl->timer.is_hard) @@ -1804,7 +2068,7 @@ static void __hrtimer_init_sleeper(struct hrtimer_sleeper *sl, clockid_t clock_id, enum hrtimer_mode mode) { /* - * On PREEMPT_RT enabled kernels hrtimers which are not explicitely + * On PREEMPT_RT enabled kernels hrtimers which are not explicitly * marked for hard interrupt expiry mode are moved into soft * interrupt context either for latency reasons or because the * hrtimer callback takes regular spinlocks or invokes other @@ -1817,13 +2081,13 @@ static void __hrtimer_init_sleeper(struct hrtimer_sleeper *sl, * the same CPU. That causes a latency spike due to the wakeup of * a gazillion threads. * - * OTOH, priviledged real-time user space applications rely on the + * OTOH, privileged real-time user space applications rely on the * low latency of hard interrupt wakeups. If the current task is in * a real-time scheduling class, mark the mode for hard interrupt * expiry. */ if (IS_ENABLED(CONFIG_PREEMPT_RT)) { - if (task_is_realtime(current) && !(mode & HRTIMER_MODE_SOFT)) + if (rt_or_dl_task_policy(current) && !(mode & HRTIMER_MODE_SOFT)) mode |= HRTIMER_MODE_HARD; } @@ -1833,19 +2097,18 @@ static void __hrtimer_init_sleeper(struct hrtimer_sleeper *sl, } /** - * hrtimer_init_sleeper - initialize sleeper to the given clock + * hrtimer_setup_sleeper_on_stack - initialize a sleeper in stack memory * @sl: sleeper to be initialized * @clock_id: the clock to be used * @mode: timer mode abs/rel */ -void hrtimer_init_sleeper(struct hrtimer_sleeper *sl, clockid_t clock_id, - enum hrtimer_mode mode) +void hrtimer_setup_sleeper_on_stack(struct hrtimer_sleeper *sl, + clockid_t clock_id, enum hrtimer_mode mode) { - debug_init(&sl->timer, clock_id, mode); + debug_init_on_stack(&sl->timer, clock_id, mode); __hrtimer_init_sleeper(sl, clock_id, mode); - } -EXPORT_SYMBOL_GPL(hrtimer_init_sleeper); +EXPORT_SYMBOL_GPL(hrtimer_setup_sleeper_on_stack); int nanosleep_copyout(struct restart_block *restart, struct timespec64 *ts) { @@ -1871,11 +2134,11 @@ static int __sched do_nanosleep(struct hrtimer_sleeper *t, enum hrtimer_mode mod struct restart_block *restart; do { - set_current_state(TASK_INTERRUPTIBLE); + set_current_state(TASK_INTERRUPTIBLE|TASK_FREEZABLE); hrtimer_sleeper_start_expires(t, mode); if (likely(t->task)) - freezable_schedule(); + schedule(); hrtimer_cancel(&t->timer); mode = HRTIMER_MODE_ABS; @@ -1906,8 +2169,7 @@ static long __sched hrtimer_nanosleep_restart(struct restart_block *restart) struct hrtimer_sleeper t; int ret; - hrtimer_init_sleeper_on_stack(&t, restart->nanosleep.clockid, - HRTIMER_MODE_ABS); + hrtimer_setup_sleeper_on_stack(&t, restart->nanosleep.clockid, HRTIMER_MODE_ABS); hrtimer_set_expires_tv64(&t.timer, restart->nanosleep.expires); ret = do_nanosleep(&t, HRTIMER_MODE_ABS); destroy_hrtimer_on_stack(&t.timer); @@ -1920,14 +2182,9 @@ long hrtimer_nanosleep(ktime_t rqtp, const enum hrtimer_mode mode, struct restart_block *restart; struct hrtimer_sleeper t; int ret = 0; - u64 slack; - - slack = current->timer_slack_ns; - if (dl_task(current) || rt_task(current)) - slack = 0; - hrtimer_init_sleeper_on_stack(&t, clockid, mode); - hrtimer_set_expires_range_ns(&t.timer, rqtp, slack); + hrtimer_setup_sleeper_on_stack(&t, clockid, mode); + hrtimer_set_expires_range_ns(&t.timer, rqtp, current->timer_slack_ns); ret = do_nanosleep(&t, mode); if (ret != -ERESTART_RESTARTBLOCK) goto out; @@ -1939,9 +2196,9 @@ long hrtimer_nanosleep(ktime_t rqtp, const enum hrtimer_mode mode, } restart = ¤t->restart_block; - restart->fn = hrtimer_nanosleep_restart; restart->nanosleep.clockid = t.timer.base->clockid; restart->nanosleep.expires = hrtimer_get_expires_tv64(&t.timer); + set_restart_fn(restart, hrtimer_nanosleep_restart); out: destroy_hrtimer_on_stack(&t.timer); return ret; @@ -1960,6 +2217,7 @@ SYSCALL_DEFINE2(nanosleep, struct __kernel_timespec __user *, rqtp, if (!timespec64_valid(&tu)) return -EINVAL; + current->restart_block.fn = do_no_restart_syscall; current->restart_block.nanosleep.type = rmtp ? TT_NATIVE : TT_NONE; current->restart_block.nanosleep.rmtp = rmtp; return hrtimer_nanosleep(timespec64_to_ktime(tu), HRTIMER_MODE_REL, @@ -1981,6 +2239,7 @@ SYSCALL_DEFINE2(nanosleep_time32, struct old_timespec32 __user *, rqtp, if (!timespec64_valid(&tu)) return -EINVAL; + current->restart_block.fn = do_no_restart_syscall; current->restart_block.nanosleep.type = rmtp ? TT_COMPAT : TT_NONE; current->restart_block.nanosleep.compat_rmtp = rmtp; return hrtimer_nanosleep(timespec64_to_ktime(tu), HRTIMER_MODE_REL, @@ -2005,6 +2264,15 @@ int hrtimers_prepare_cpu(unsigned int cpu) } cpu_base->cpu = cpu; + hrtimer_cpu_base_init_expiry_lock(cpu_base); + return 0; +} + +int hrtimers_cpu_starting(unsigned int cpu) +{ + struct hrtimer_cpu_base *cpu_base = this_cpu_ptr(&hrtimer_bases); + + /* Clear out any left over state from a CPU down operation */ cpu_base->active_bases = 0; cpu_base->hres_active = 0; cpu_base->hang_detected = 0; @@ -2012,7 +2280,7 @@ int hrtimers_prepare_cpu(unsigned int cpu) cpu_base->softirq_next_timer = NULL; cpu_base->expires_next = KTIME_MAX; cpu_base->softirq_expires_next = KTIME_MAX; - hrtimer_cpu_base_init_expiry_lock(cpu_base); + cpu_base->online = 1; return 0; } @@ -2048,29 +2316,20 @@ static void migrate_hrtimer_list(struct hrtimer_clock_base *old_base, } } -int hrtimers_dead_cpu(unsigned int scpu) +int hrtimers_cpu_dying(unsigned int dying_cpu) { + int i, ncpu = cpumask_any_and(cpu_active_mask, housekeeping_cpumask(HK_TYPE_TIMER)); struct hrtimer_cpu_base *old_base, *new_base; - int i; - BUG_ON(cpu_online(scpu)); - tick_cancel_sched_timer(scpu); + old_base = this_cpu_ptr(&hrtimer_bases); + new_base = &per_cpu(hrtimer_bases, ncpu); /* - * this BH disable ensures that raise_softirq_irqoff() does - * not wakeup ksoftirqd (and acquire the pi-lock) while - * holding the cpu_base lock - */ - local_bh_disable(); - local_irq_disable(); - old_base = &per_cpu(hrtimer_bases, scpu); - new_base = this_cpu_ptr(&hrtimer_bases); - /* * The caller is globally serialized and nobody else * takes two locks at once, deadlock is not possible. */ - raw_spin_lock(&new_base->lock); - raw_spin_lock_nested(&old_base->lock, SINGLE_DEPTH_NESTING); + raw_spin_lock(&old_base->lock); + raw_spin_lock_nested(&new_base->lock, SINGLE_DEPTH_NESTING); for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) { migrate_hrtimer_list(&old_base->clock_base[i], @@ -2081,15 +2340,14 @@ int hrtimers_dead_cpu(unsigned int scpu) * The migration might have changed the first expiring softirq * timer on this CPU. Update it. */ - hrtimer_update_softirq_timer(new_base, false); + __hrtimer_get_next_event(new_base, HRTIMER_ACTIVE_SOFT); + /* Tell the other CPU to retrigger the next event */ + smp_call_function_single(ncpu, retrigger_next_event, NULL, 0); - raw_spin_unlock(&old_base->lock); raw_spin_unlock(&new_base->lock); + old_base->online = 0; + raw_spin_unlock(&old_base->lock); - /* Check, if we got expired work to do */ - __hrtimer_peek_ahead_timers(); - local_irq_enable(); - local_bh_enable(); return 0; } @@ -2098,123 +2356,6 @@ int hrtimers_dead_cpu(unsigned int scpu) void __init hrtimers_init(void) { hrtimers_prepare_cpu(smp_processor_id()); + hrtimers_cpu_starting(smp_processor_id()); open_softirq(HRTIMER_SOFTIRQ, hrtimer_run_softirq); } - -/** - * schedule_hrtimeout_range_clock - sleep until timeout - * @expires: timeout value (ktime_t) - * @delta: slack in expires timeout (ktime_t) - * @mode: timer mode - * @clock_id: timer clock to be used - */ -int __sched -schedule_hrtimeout_range_clock(ktime_t *expires, u64 delta, - const enum hrtimer_mode mode, clockid_t clock_id) -{ - struct hrtimer_sleeper t; - - /* - * Optimize when a zero timeout value is given. It does not - * matter whether this is an absolute or a relative time. - */ - if (expires && *expires == 0) { - __set_current_state(TASK_RUNNING); - return 0; - } - - /* - * A NULL parameter means "infinite" - */ - if (!expires) { - schedule(); - return -EINTR; - } - - hrtimer_init_sleeper_on_stack(&t, clock_id, mode); - hrtimer_set_expires_range_ns(&t.timer, *expires, delta); - hrtimer_sleeper_start_expires(&t, mode); - - if (likely(t.task)) - schedule(); - - hrtimer_cancel(&t.timer); - destroy_hrtimer_on_stack(&t.timer); - - __set_current_state(TASK_RUNNING); - - return !t.task ? 0 : -EINTR; -} - -/** - * schedule_hrtimeout_range - sleep until timeout - * @expires: timeout value (ktime_t) - * @delta: slack in expires timeout (ktime_t) - * @mode: timer mode - * - * Make the current task sleep until the given expiry time has - * elapsed. The routine will return immediately unless - * the current task state has been set (see set_current_state()). - * - * The @delta argument gives the kernel the freedom to schedule the - * actual wakeup to a time that is both power and performance friendly. - * The kernel give the normal best effort behavior for "@expires+@delta", - * but may decide to fire the timer earlier, but no earlier than @expires. - * - * You can set the task state as follows - - * - * %TASK_UNINTERRUPTIBLE - at least @timeout time is guaranteed to - * pass before the routine returns unless the current task is explicitly - * woken up, (e.g. by wake_up_process()). - * - * %TASK_INTERRUPTIBLE - the routine may return early if a signal is - * delivered to the current task or the current task is explicitly woken - * up. - * - * The current task state is guaranteed to be TASK_RUNNING when this - * routine returns. - * - * Returns 0 when the timer has expired. If the task was woken before the - * timer expired by a signal (only possible in state TASK_INTERRUPTIBLE) or - * by an explicit wakeup, it returns -EINTR. - */ -int __sched schedule_hrtimeout_range(ktime_t *expires, u64 delta, - const enum hrtimer_mode mode) -{ - return schedule_hrtimeout_range_clock(expires, delta, mode, - CLOCK_MONOTONIC); -} -EXPORT_SYMBOL_GPL(schedule_hrtimeout_range); - -/** - * schedule_hrtimeout - sleep until timeout - * @expires: timeout value (ktime_t) - * @mode: timer mode - * - * Make the current task sleep until the given expiry time has - * elapsed. The routine will return immediately unless - * the current task state has been set (see set_current_state()). - * - * You can set the task state as follows - - * - * %TASK_UNINTERRUPTIBLE - at least @timeout time is guaranteed to - * pass before the routine returns unless the current task is explicitly - * woken up, (e.g. by wake_up_process()). - * - * %TASK_INTERRUPTIBLE - the routine may return early if a signal is - * delivered to the current task or the current task is explicitly woken - * up. - * - * The current task state is guaranteed to be TASK_RUNNING when this - * routine returns. - * - * Returns 0 when the timer has expired. If the task was woken before the - * timer expired by a signal (only possible in state TASK_INTERRUPTIBLE) or - * by an explicit wakeup, it returns -EINTR. - */ -int __sched schedule_hrtimeout(ktime_t *expires, - const enum hrtimer_mode mode) -{ - return schedule_hrtimeout_range(expires, 0, mode); -} -EXPORT_SYMBOL_GPL(schedule_hrtimeout); |