summaryrefslogtreecommitdiff
path: root/sound/soc/atmel/atmel_ssc_dai.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/atmel/atmel_ssc_dai.c')
-rw-r--r--sound/soc/atmel/atmel_ssc_dai.c790
1 files changed, 790 insertions, 0 deletions
diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
new file mode 100644
index 000000000000..c5d67900d666
--- /dev/null
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -0,0 +1,790 @@
+/*
+ * atmel_ssc_dai.c -- ALSA SoC ATMEL SSC Audio Layer Platform driver
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2008 Atmel
+ *
+ * Author: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+ * ATMEL CORP.
+ *
+ * Based on at91-ssc.c by
+ * Frank Mandarino <fmandarino@endrelia.com>
+ * Based on pxa2xx Platform drivers by
+ * Liam Girdwood <liam.girdwood@wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/atmel_pdc.h>
+
+#include <linux/atmel-ssc.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include <mach/hardware.h>
+
+#include "atmel-pcm.h"
+#include "atmel_ssc_dai.h"
+
+
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
+#define NUM_SSC_DEVICES 1
+#else
+#define NUM_SSC_DEVICES 3
+#endif
+
+/*
+ * SSC PDC registers required by the PCM DMA engine.
+ */
+static struct atmel_pdc_regs pdc_tx_reg = {
+ .xpr = ATMEL_PDC_TPR,
+ .xcr = ATMEL_PDC_TCR,
+ .xnpr = ATMEL_PDC_TNPR,
+ .xncr = ATMEL_PDC_TNCR,
+};
+
+static struct atmel_pdc_regs pdc_rx_reg = {
+ .xpr = ATMEL_PDC_RPR,
+ .xcr = ATMEL_PDC_RCR,
+ .xnpr = ATMEL_PDC_RNPR,
+ .xncr = ATMEL_PDC_RNCR,
+};
+
+/*
+ * SSC & PDC status bits for transmit and receive.
+ */
+static struct atmel_ssc_mask ssc_tx_mask = {
+ .ssc_enable = SSC_BIT(CR_TXEN),
+ .ssc_disable = SSC_BIT(CR_TXDIS),
+ .ssc_endx = SSC_BIT(SR_ENDTX),
+ .ssc_endbuf = SSC_BIT(SR_TXBUFE),
+ .pdc_enable = ATMEL_PDC_TXTEN,
+ .pdc_disable = ATMEL_PDC_TXTDIS,
+};
+
+static struct atmel_ssc_mask ssc_rx_mask = {
+ .ssc_enable = SSC_BIT(CR_RXEN),
+ .ssc_disable = SSC_BIT(CR_RXDIS),
+ .ssc_endx = SSC_BIT(SR_ENDRX),
+ .ssc_endbuf = SSC_BIT(SR_RXBUFF),
+ .pdc_enable = ATMEL_PDC_RXTEN,
+ .pdc_disable = ATMEL_PDC_RXTDIS,
+};
+
+
+/*
+ * DMA parameters.
+ */
+static struct atmel_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = {
+ {{
+ .name = "SSC0 PCM out",
+ .pdc = &pdc_tx_reg,
+ .mask = &ssc_tx_mask,
+ },
+ {
+ .name = "SSC0 PCM in",
+ .pdc = &pdc_rx_reg,
+ .mask = &ssc_rx_mask,
+ } },
+#if NUM_SSC_DEVICES == 3
+ {{
+ .name = "SSC1 PCM out",
+ .pdc = &pdc_tx_reg,
+ .mask = &ssc_tx_mask,
+ },
+ {
+ .name = "SSC1 PCM in",
+ .pdc = &pdc_rx_reg,
+ .mask = &ssc_rx_mask,
+ } },
+ {{
+ .name = "SSC2 PCM out",
+ .pdc = &pdc_tx_reg,
+ .mask = &ssc_tx_mask,
+ },
+ {
+ .name = "SSC2 PCM in",
+ .pdc = &pdc_rx_reg,
+ .mask = &ssc_rx_mask,
+ } },
+#endif
+};
+
+
+static struct atmel_ssc_info ssc_info[NUM_SSC_DEVICES] = {
+ {
+ .name = "ssc0",
+ .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock),
+ .dir_mask = SSC_DIR_MASK_UNUSED,
+ .initialized = 0,
+ },
+#if NUM_SSC_DEVICES == 3
+ {
+ .name = "ssc1",
+ .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock),
+ .dir_mask = SSC_DIR_MASK_UNUSED,
+ .initialized = 0,
+ },
+ {
+ .name = "ssc2",
+ .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock),
+ .dir_mask = SSC_DIR_MASK_UNUSED,
+ .initialized = 0,
+ },
+#endif
+};
+
+
+/*
+ * SSC interrupt handler. Passes PDC interrupts to the DMA
+ * interrupt handler in the PCM driver.
+ */
+static irqreturn_t atmel_ssc_interrupt(int irq, void *dev_id)
+{
+ struct atmel_ssc_info *ssc_p = dev_id;
+ struct atmel_pcm_dma_params *dma_params;
+ u32 ssc_sr;
+ u32 ssc_substream_mask;
+ int i;
+
+ ssc_sr = (unsigned long)ssc_readl(ssc_p->ssc->regs, SR)
+ & (unsigned long)ssc_readl(ssc_p->ssc->regs, IMR);
+
+ /*
+ * Loop through the substreams attached to this SSC. If
+ * a DMA-related interrupt occurred on that substream, call
+ * the DMA interrupt handler function, if one has been
+ * registered in the dma_params structure by the PCM driver.
+ */
+ for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) {
+ dma_params = ssc_p->dma_params[i];
+
+ if ((dma_params != NULL) &&
+ (dma_params->dma_intr_handler != NULL)) {
+ ssc_substream_mask = (dma_params->mask->ssc_endx |
+ dma_params->mask->ssc_endbuf);
+ if (ssc_sr & ssc_substream_mask) {
+ dma_params->dma_intr_handler(ssc_sr,
+ dma_params->
+ substream);
+ }
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+
+/*-------------------------------------------------------------------------*\
+ * DAI functions
+\*-------------------------------------------------------------------------*/
+/*
+ * Startup. Only that one substream allowed in each direction.
+ */
+static int atmel_ssc_startup(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+ struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
+ int dir_mask;
+
+ pr_debug("atmel_ssc_startup: SSC_SR=0x%u\n",
+ ssc_readl(ssc_p->ssc->regs, SR));
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dir_mask = SSC_DIR_MASK_PLAYBACK;
+ else
+ dir_mask = SSC_DIR_MASK_CAPTURE;
+
+ spin_lock_irq(&ssc_p->lock);
+ if (ssc_p->dir_mask & dir_mask) {
+ spin_unlock_irq(&ssc_p->lock);
+ return -EBUSY;
+ }
+ ssc_p->dir_mask |= dir_mask;
+ spin_unlock_irq(&ssc_p->lock);
+
+ return 0;
+}
+
+/*
+ * Shutdown. Clear DMA parameters and shutdown the SSC if there
+ * are no other substreams open.
+ */
+static void atmel_ssc_shutdown(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+ struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
+ struct atmel_pcm_dma_params *dma_params;
+ int dir, dir_mask;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dir = 0;
+ else
+ dir = 1;
+
+ dma_params = ssc_p->dma_params[dir];
+
+ if (dma_params != NULL) {
+ ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable);
+ pr_debug("atmel_ssc_shutdown: %s disabled SSC_SR=0x%08x\n",
+ (dir ? "receive" : "transmit"),
+ ssc_readl(ssc_p->ssc->regs, SR));
+
+ dma_params->ssc = NULL;
+ dma_params->substream = NULL;
+ ssc_p->dma_params[dir] = NULL;
+ }
+
+ dir_mask = 1 << dir;
+
+ spin_lock_irq(&ssc_p->lock);
+ ssc_p->dir_mask &= ~dir_mask;
+ if (!ssc_p->dir_mask) {
+ if (ssc_p->initialized) {
+ /* Shutdown the SSC clock. */
+ pr_debug("atmel_ssc_dau: Stopping clock\n");
+ clk_disable(ssc_p->ssc->clk);
+
+ free_irq(ssc_p->ssc->irq, ssc_p);
+ ssc_p->initialized = 0;
+ }
+
+ /* Reset the SSC */
+ ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
+ /* Clear the SSC dividers */
+ ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0;
+ }
+ spin_unlock_irq(&ssc_p->lock);
+}
+
+
+/*
+ * Record the DAI format for use in hw_params().
+ */
+static int atmel_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai,
+ unsigned int fmt)
+{
+ struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id];
+
+ ssc_p->daifmt = fmt;
+ return 0;
+}
+
+/*
+ * Record SSC clock dividers for use in hw_params().
+ */
+static int atmel_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
+ int div_id, int div)
+{
+ struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id];
+
+ switch (div_id) {
+ case ATMEL_SSC_CMR_DIV:
+ /*
+ * The same master clock divider is used for both
+ * transmit and receive, so if a value has already
+ * been set, it must match this value.
+ */
+ if (ssc_p->cmr_div == 0)
+ ssc_p->cmr_div = div;
+ else
+ if (div != ssc_p->cmr_div)
+ return -EBUSY;
+ break;
+
+ case ATMEL_SSC_TCMR_PERIOD:
+ ssc_p->tcmr_period = div;
+ break;
+
+ case ATMEL_SSC_RCMR_PERIOD:
+ ssc_p->rcmr_period = div;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * Configure the SSC.
+ */
+static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+ int id = rtd->dai->cpu_dai->id;
+ struct atmel_ssc_info *ssc_p = &ssc_info[id];
+ struct atmel_pcm_dma_params *dma_params;
+ int dir, channels, bits;
+ u32 tfmr, rfmr, tcmr, rcmr;
+ int start_event;
+ int ret;
+
+ /*
+ * Currently, there is only one set of dma params for
+ * each direction. If more are added, this code will
+ * have to be changed to select the proper set.
+ */
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dir = 0;
+ else
+ dir = 1;
+
+ dma_params = &ssc_dma_params[id][dir];
+ dma_params->ssc = ssc_p->ssc;
+ dma_params->substream = substream;
+
+ ssc_p->dma_params[dir] = dma_params;
+
+ /*
+ * The cpu_dai->dma_data field is only used to communicate the
+ * appropriate DMA parameters to the pcm driver hw_params()
+ * function. It should not be used for other purposes
+ * as it is common to all substreams.
+ */
+ rtd->dai->cpu_dai->dma_data = dma_params;
+
+ channels = params_channels(params);
+
+ /*
+ * Determine sample size in bits and the PDC increment.
+ */
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S8:
+ bits = 8;
+ dma_params->pdc_xfer_size = 1;
+ break;
+ case SNDRV_PCM_FORMAT_S16_LE:
+ bits = 16;
+ dma_params->pdc_xfer_size = 2;
+ break;
+ case SNDRV_PCM_FORMAT_S24_LE:
+ bits = 24;
+ dma_params->pdc_xfer_size = 4;
+ break;
+ case SNDRV_PCM_FORMAT_S32_LE:
+ bits = 32;
+ dma_params->pdc_xfer_size = 4;
+ break;
+ default:
+ printk(KERN_WARNING "atmel_ssc_dai: unsupported PCM format");
+ return -EINVAL;
+ }
+
+ /*
+ * The SSC only supports up to 16-bit samples in I2S format, due
+ * to the size of the Frame Mode Register FSLEN field.
+ */
+ if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S
+ && bits > 16) {
+ printk(KERN_WARNING
+ "atmel_ssc_dai: sample size %d"
+ "is too large for I2S\n", bits);
+ return -EINVAL;
+ }
+
+ /*
+ * Compute SSC register settings.
+ */
+ switch (ssc_p->daifmt
+ & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) {
+
+ case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS:
+ /*
+ * I2S format, SSC provides BCLK and LRC clocks.
+ *
+ * The SSC transmit and receive clocks are generated
+ * from the MCK divider, and the BCLK signal
+ * is output on the SSC TK line.
+ */
+ rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period)
+ | SSC_BF(RCMR_STTDLY, START_DELAY)
+ | SSC_BF(RCMR_START, SSC_START_FALLING_RF)
+ | SSC_BF(RCMR_CKI, SSC_CKI_RISING)
+ | SSC_BF(RCMR_CKO, SSC_CKO_NONE)
+ | SSC_BF(RCMR_CKS, SSC_CKS_DIV);
+
+ rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE)
+ | SSC_BF(RFMR_FSLEN, (bits - 1))
+ | SSC_BF(RFMR_DATNB, (channels - 1))
+ | SSC_BIT(RFMR_MSBF)
+ | SSC_BF(RFMR_LOOP, 0)
+ | SSC_BF(RFMR_DATLEN, (bits - 1));
+
+ tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period)
+ | SSC_BF(TCMR_STTDLY, START_DELAY)
+ | SSC_BF(TCMR_START, SSC_START_FALLING_RF)
+ | SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
+ | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS)
+ | SSC_BF(TCMR_CKS, SSC_CKS_DIV);
+
+ tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(TFMR_FSDEN, 0)
+ | SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE)
+ | SSC_BF(TFMR_FSLEN, (bits - 1))
+ | SSC_BF(TFMR_DATNB, (channels - 1))
+ | SSC_BIT(TFMR_MSBF)
+ | SSC_BF(TFMR_DATDEF, 0)
+ | SSC_BF(TFMR_DATLEN, (bits - 1));
+ break;
+
+ case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM:
+ /*
+ * I2S format, CODEC supplies BCLK and LRC clocks.
+ *
+ * The SSC transmit clock is obtained from the BCLK signal on
+ * on the TK line, and the SSC receive clock is
+ * generated from the transmit clock.
+ *
+ * For single channel data, one sample is transferred
+ * on the falling edge of the LRC clock.
+ * For two channel data, one sample is
+ * transferred on both edges of the LRC clock.
+ */
+ start_event = ((channels == 1)
+ ? SSC_START_FALLING_RF
+ : SSC_START_EDGE_RF);
+
+ rcmr = SSC_BF(RCMR_PERIOD, 0)
+ | SSC_BF(RCMR_STTDLY, START_DELAY)
+ | SSC_BF(RCMR_START, start_event)
+ | SSC_BF(RCMR_CKI, SSC_CKI_RISING)
+ | SSC_BF(RCMR_CKO, SSC_CKO_NONE)
+ | SSC_BF(RCMR_CKS, SSC_CKS_CLOCK);
+
+ rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(RFMR_FSOS, SSC_FSOS_NONE)
+ | SSC_BF(RFMR_FSLEN, 0)
+ | SSC_BF(RFMR_DATNB, 0)
+ | SSC_BIT(RFMR_MSBF)
+ | SSC_BF(RFMR_LOOP, 0)
+ | SSC_BF(RFMR_DATLEN, (bits - 1));
+
+ tcmr = SSC_BF(TCMR_PERIOD, 0)
+ | SSC_BF(TCMR_STTDLY, START_DELAY)
+ | SSC_BF(TCMR_START, start_event)
+ | SSC_BF(TCMR_CKI, SSC_CKI_FALLING)
+ | SSC_BF(TCMR_CKO, SSC_CKO_NONE)
+ | SSC_BF(TCMR_CKS, SSC_CKS_PIN);
+
+ tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(TFMR_FSDEN, 0)
+ | SSC_BF(TFMR_FSOS, SSC_FSOS_NONE)
+ | SSC_BF(TFMR_FSLEN, 0)
+ | SSC_BF(TFMR_DATNB, 0)
+ | SSC_BIT(TFMR_MSBF)
+ | SSC_BF(TFMR_DATDEF, 0)
+ | SSC_BF(TFMR_DATLEN, (bits - 1));
+ break;
+
+ case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS:
+ /*
+ * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks.
+ *
+ * The SSC transmit and receive clocks are generated from the
+ * MCK divider, and the BCLK signal is output
+ * on the SSC TK line.
+ */
+ rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period)
+ | SSC_BF(RCMR_STTDLY, 1)
+ | SSC_BF(RCMR_START, SSC_START_RISING_RF)
+ | SSC_BF(RCMR_CKI, SSC_CKI_RISING)
+ | SSC_BF(RCMR_CKO, SSC_CKO_NONE)
+ | SSC_BF(RCMR_CKS, SSC_CKS_DIV);
+
+ rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE)
+ | SSC_BF(RFMR_FSLEN, 0)
+ | SSC_BF(RFMR_DATNB, (channels - 1))
+ | SSC_BIT(RFMR_MSBF)
+ | SSC_BF(RFMR_LOOP, 0)
+ | SSC_BF(RFMR_DATLEN, (bits - 1));
+
+ tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period)
+ | SSC_BF(TCMR_STTDLY, 1)
+ | SSC_BF(TCMR_START, SSC_START_RISING_RF)
+ | SSC_BF(TCMR_CKI, SSC_CKI_RISING)
+ | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS)
+ | SSC_BF(TCMR_CKS, SSC_CKS_DIV);
+
+ tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+ | SSC_BF(TFMR_FSDEN, 0)
+ | SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE)
+ | SSC_BF(TFMR_FSLEN, 0)
+ | SSC_BF(TFMR_DATNB, (channels - 1))
+ | SSC_BIT(TFMR_MSBF)
+ | SSC_BF(TFMR_DATDEF, 0)
+ | SSC_BF(TFMR_DATLEN, (bits - 1));
+ break;
+
+ case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM:
+ default:
+ printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x\n",
+ ssc_p->daifmt);
+ return -EINVAL;
+ break;
+ }
+ pr_debug("atmel_ssc_hw_params: "
+ "RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n",
+ rcmr, rfmr, tcmr, tfmr);
+
+ if (!ssc_p->initialized) {
+
+ /* Enable PMC peripheral clock for this SSC */
+ pr_debug("atmel_ssc_dai: Starting clock\n");
+ clk_enable(ssc_p->ssc->clk);
+
+ /* Reset the SSC and its PDC registers */
+ ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
+
+ ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0);
+
+ ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0);
+ ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0);
+
+ ret = request_irq(ssc_p->ssc->irq, atmel_ssc_interrupt, 0,
+ ssc_p->name, ssc_p);
+ if (ret < 0) {
+ printk(KERN_WARNING
+ "atmel_ssc_dai: request_irq failure\n");
+ pr_debug("Atmel_ssc_dai: Stoping clock\n");
+ clk_disable(ssc_p->ssc->clk);
+ return ret;
+ }
+
+ ssc_p->initialized = 1;
+ }
+
+ /* set SSC clock mode register */
+ ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div);
+
+ /* set receive clock mode and format */
+ ssc_writel(ssc_p->ssc->regs, RCMR, rcmr);
+ ssc_writel(ssc_p->ssc->regs, RFMR, rfmr);
+
+ /* set transmit clock mode and format */
+ ssc_writel(ssc_p->ssc->regs, TCMR, tcmr);
+ ssc_writel(ssc_p->ssc->regs, TFMR, tfmr);
+
+ pr_debug("atmel_ssc_dai,hw_params: SSC initialized\n");
+ return 0;
+}
+
+
+static int atmel_ssc_prepare(struct snd_pcm_substream *substream,
+ struct snd_soc_dai *dai)
+{
+ struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
+ struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id];
+ struct atmel_pcm_dma_params *dma_params;
+ int dir;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ dir = 0;
+ else
+ dir = 1;
+
+ dma_params = ssc_p->dma_params[dir];
+
+ ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable);
+
+ pr_debug("%s enabled SSC_SR=0x%08x\n",
+ dir ? "receive" : "transmit",
+ ssc_readl(ssc_p->ssc->regs, SR));
+ return 0;
+}
+
+
+#ifdef CONFIG_PM
+static int atmel_ssc_suspend(struct snd_soc_dai *cpu_dai)
+{
+ struct atmel_ssc_info *ssc_p;
+
+ if (!cpu_dai->active)
+ return 0;
+
+ ssc_p = &ssc_info[cpu_dai->id];
+
+ /* Save the status register before disabling transmit and receive */
+ ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR);
+ ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS));
+
+ /* Save the current interrupt mask, then disable unmasked interrupts */
+ ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR);
+ ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr);
+
+ ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR);
+ ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR);
+ ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR);
+ ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR);
+ ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR);
+
+ return 0;
+}
+
+
+
+static int atmel_ssc_resume(struct snd_soc_dai *cpu_dai)
+{
+ struct atmel_ssc_info *ssc_p;
+ u32 cr;
+
+ if (!cpu_dai->active)
+ return 0;
+
+ ssc_p = &ssc_info[cpu_dai->id];
+
+ /* restore SSC register settings */
+ ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr);
+ ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr);
+ ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr);
+ ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr);
+ ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr);
+
+ /* re-enable interrupts */
+ ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr);
+
+ /* Re-enable recieve and transmit as appropriate */
+ cr = 0;
+ cr |=
+ (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0;
+ cr |=
+ (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0;
+ ssc_writel(ssc_p->ssc->regs, CR, cr);
+
+ return 0;
+}
+#else /* CONFIG_PM */
+# define atmel_ssc_suspend NULL
+# define atmel_ssc_resume NULL
+#endif /* CONFIG_PM */
+
+
+#define ATMEL_SSC_RATES (SNDRV_PCM_RATE_8000_96000)
+
+#define ATMEL_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\
+ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+struct snd_soc_dai atmel_ssc_dai[NUM_SSC_DEVICES] = {
+ { .name = "atmel-ssc0",
+ .id = 0,
+ .suspend = atmel_ssc_suspend,
+ .resume = atmel_ssc_resume,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .ops = {
+ .startup = atmel_ssc_startup,
+ .shutdown = atmel_ssc_shutdown,
+ .prepare = atmel_ssc_prepare,
+ .hw_params = atmel_ssc_hw_params,
+ .set_fmt = atmel_ssc_set_dai_fmt,
+ .set_clkdiv = atmel_ssc_set_dai_clkdiv,},
+ .private_data = &ssc_info[0],
+ },
+#if NUM_SSC_DEVICES == 3
+ { .name = "atmel-ssc1",
+ .id = 1,
+ .suspend = atmel_ssc_suspend,
+ .resume = atmel_ssc_resume,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .ops = {
+ .startup = atmel_ssc_startup,
+ .shutdown = atmel_ssc_shutdown,
+ .prepare = atmel_ssc_prepare,
+ .hw_params = atmel_ssc_hw_params,
+ .set_fmt = atmel_ssc_set_dai_fmt,
+ .set_clkdiv = atmel_ssc_set_dai_clkdiv,},
+ .private_data = &ssc_info[1],
+ },
+ { .name = "atmel-ssc2",
+ .id = 2,
+ .suspend = atmel_ssc_suspend,
+ .resume = atmel_ssc_resume,
+ .playback = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .capture = {
+ .channels_min = 1,
+ .channels_max = 2,
+ .rates = ATMEL_SSC_RATES,
+ .formats = ATMEL_SSC_FORMATS,},
+ .ops = {
+ .startup = atmel_ssc_startup,
+ .shutdown = atmel_ssc_shutdown,
+ .prepare = atmel_ssc_prepare,
+ .hw_params = atmel_ssc_hw_params,
+ .set_fmt = atmel_ssc_set_dai_fmt,
+ .set_clkdiv = atmel_ssc_set_dai_clkdiv,},
+ .private_data = &ssc_info[2],
+ },
+#endif
+};
+EXPORT_SYMBOL_GPL(atmel_ssc_dai);
+
+static int __init atmel_ssc_modinit(void)
+{
+ return snd_soc_register_dais(atmel_ssc_dai, ARRAY_SIZE(atmel_ssc_dai));
+}
+module_init(atmel_ssc_modinit);
+
+static void __exit atmel_ssc_modexit(void)
+{
+ snd_soc_unregister_dais(atmel_ssc_dai, ARRAY_SIZE(atmel_ssc_dai));
+}
+module_exit(atmel_ssc_modexit);
+
+/* Module information */
+MODULE_AUTHOR("Sedji Gaouaou, sedji.gaouaou@atmel.com, www.atmel.com");
+MODULE_DESCRIPTION("ATMEL SSC ASoC Interface");
+MODULE_LICENSE("GPL");