diff options
Diffstat (limited to 'sound/soc/blackfin/Kconfig')
| -rw-r--r-- | sound/soc/blackfin/Kconfig | 205 |
1 files changed, 0 insertions, 205 deletions
diff --git a/sound/soc/blackfin/Kconfig b/sound/soc/blackfin/Kconfig deleted file mode 100644 index 6410aa2cc2cf..000000000000 --- a/sound/soc/blackfin/Kconfig +++ /dev/null @@ -1,205 +0,0 @@ -config SND_BF5XX_I2S - tristate "SoC I2S Audio for the ADI Blackfin chip" - depends on BLACKFIN - select SND_BF5XX_SOC_SPORT if !BF60x - select SND_BF6XX_SOC_SPORT if BF60x - help - Say Y or M if you want to add support for codecs attached to - the Blackfin SPORT (synchronous serial ports) interface in I2S - mode (supports single stereo In/Out). - You will also need to select the audio interfaces to support below. - -config SND_BF5XX_SOC_SSM2602 - tristate "SoC SSM2602 Audio Codec Add-On Card support" - depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI - select SND_BF5XX_SOC_I2S if !BF60x - select SND_BF6XX_SOC_I2S if BF60x - select SND_SOC_SSM2602_SPI if SPI_MASTER - select SND_SOC_SSM2602_I2C if I2C - help - Say Y if you want to add support for the Analog Devices - SSM2602 Audio Codec Add-On Card. - -config SND_SOC_BFIN_EVAL_ADAU1701 - tristate "Support for the EVAL-ADAU1701MINIZ board on Blackfin eval boards" - depends on SND_BF5XX_I2S && I2C - select SND_BF5XX_SOC_I2S - select SND_SOC_ADAU1701 - help - Say Y if you want to add support for the Analog Devices EVAL-ADAU1701MINIZ - board connected to one of the Blackfin evaluation boards like the - BF5XX-STAMP or BF5XX-EZKIT. - -config SND_SOC_BFIN_EVAL_ADAU1373 - tristate "Support for the EVAL-ADAU1373 board on Blackfin eval boards" - depends on SND_BF5XX_I2S && I2C - select SND_BF5XX_SOC_I2S - select SND_SOC_ADAU1373 - help - Say Y if you want to add support for the Analog Devices EVAL-ADAU1373 - board connected to one of the Blackfin evaluation boards like the - BF5XX-STAMP or BF5XX-EZKIT. - - Note: This driver assumes that first ADAU1373 DAI is connected to the - first SPORT port on the BF5XX board. - -config SND_SOC_BFIN_EVAL_ADAU1X61 - tristate "Support for the EVAL-ADAU1X61 board on Blackfin eval boards" - depends on SND_BF5XX_I2S && I2C - select SND_BF5XX_SOC_I2S - select SND_SOC_ADAU1761_I2C - help - Say Y if you want to add support for the Analog Devices EVAL-ADAU1X61 - board connected to one of the Blackfin evaluation boards like the - BF5XX-STAMP or BF5XX-EZKIT. - - Note: This driver assumes that the ADAU1X61 is connected to the - first SPORT port on the BF5XX board. - -config SND_SOC_BFIN_EVAL_ADAU1X81 - tristate "Support for the EVAL-ADAU1X81 boards on Blackfin eval boards" - depends on SND_BF5XX_I2S && I2C - select SND_BF5XX_SOC_I2S - select SND_SOC_ADAU1781_I2C - help - Say Y if you want to add support for the Analog Devices EVAL-ADAU1X81 - board connected to one of the Blackfin evaluation boards like the - BF5XX-STAMP or BF5XX-EZKIT. - - Note: This driver assumes that the ADAU1X81 is connected to the - first SPORT port on the BF5XX board. - -config SND_SOC_BFIN_EVAL_ADAV80X - tristate "Support for the EVAL-ADAV80X boards on Blackfin eval boards" - depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI - select SND_BF5XX_SOC_I2S - select SND_SOC_ADAV801 if SPI_MASTER - select SND_SOC_ADAV803 if I2C - help - Say Y if you want to add support for the Analog Devices EVAL-ADAV801 or - EVAL-ADAV803 board connected to one of the Blackfin evaluation boards - like the BF5XX-STAMP or BF5XX-EZKIT. - - Note: This driver assumes that the ADAV80X digital record and playback - interfaces are connected to the first SPORT port on the BF5XX board. - -config SND_BF5XX_SOC_AD1836 - tristate "SoC AD1836 Audio support for BF5xx" - depends on SND_BF5XX_I2S && SPI_MASTER - select SND_BF5XX_SOC_I2S - select SND_SOC_AD1836 - help - Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT. - -config SND_BF5XX_SOC_AD193X - tristate "SoC AD193X Audio support for Blackfin" - depends on SND_BF5XX_I2S && SND_SOC_I2C_AND_SPI - select SND_BF5XX_SOC_I2S - select SND_SOC_AD193X_I2C if I2C - select SND_SOC_AD193X_SPI if SPI_MASTER - help - Say Y if you want to add support for AD193X codec on Blackfin. - This driver supports AD1936, AD1937, AD1938 and AD1939. - -config SND_BF5XX_SOC_AD73311 - tristate "SoC AD73311 Audio support for Blackfin" - depends on SND_BF5XX_I2S - select SND_BF5XX_SOC_I2S - select SND_SOC_AD73311 - help - Say Y if you want to add support for AD73311 codec on Blackfin. - -config SND_BFIN_AD73311_SE - int "PF pin for AD73311L Chip Select" - depends on SND_BF5XX_SOC_AD73311 - default 4 - help - Enter the GPIO used to control AD73311's SE pin. Acceptable - values are 0 to 7 - -config SND_BF5XX_AC97 - tristate "SoC AC97 Audio for the ADI BF5xx chip" - depends on BLACKFIN - select AC97_BUS - select SND_SOC_AC97_BUS - select SND_BF5XX_SOC_SPORT - select SND_BF5XX_SOC_AC97 - help - Say Y or M if you want to add support for codecs attached to - the Blackfin SPORT (synchronous serial ports) interface in slot 16 - mode (pseudo AC97 interface). - You will also need to select the audio interfaces to support below. - - Note: - AC97 codecs which do not implement the slot-16 mode will not function - properly with this driver. This driver is known to work with the - Analog Devices line of AC97 codecs. - -config SND_BF5XX_MMAP_SUPPORT - bool "Enable MMAP Support" - depends on SND_BF5XX_AC97 - default y - help - Say y if you want AC97 driver to support mmap mode. - We introduce an intermediate buffer to simulate mmap. - -config SND_BF5XX_MULTICHAN_SUPPORT - bool "Enable Multichannel Support" - depends on SND_BF5XX_AC97 - default n - help - Say y if you want AC97 driver to support up to 5.1 channel audio. - this mode will consume much more memory for DMA. - -config SND_BF5XX_HAVE_COLD_RESET - bool "BOARD has COLD Reset GPIO" - depends on SND_BF5XX_AC97 - default y if BFIN548_EZKIT - default n if !BFIN548_EZKIT - -config SND_BF5XX_RESET_GPIO_NUM - int "Set a GPIO for cold reset" - depends on SND_BF5XX_HAVE_COLD_RESET - range 0 159 - default 19 if BFIN548_EZKIT - default 5 if BFIN537_STAMP - default 0 - help - Set the correct GPIO for RESET the sound chip. - -config SND_BF5XX_SOC_AD1980 - tristate "SoC AD1980/1 Audio support for BF5xx (Obsolete)" - depends on SND_BF5XX_AC97 - select SND_BF5XX_SOC_AC97 - select SND_SOC_AD1980 - help - Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT. - - Warning: - Because Analog Devices Inc. discontinued the ad1980 sound chip since - Sep. 2009, this ad1980 driver is not maintained, tested and supported - by ADI now. - -config SND_BF5XX_SOC_SPORT - tristate - -config SND_BF6XX_SOC_SPORT - tristate - -config SND_BF5XX_SOC_I2S - tristate - -config SND_BF6XX_SOC_I2S - tristate - -config SND_BF5XX_SOC_AC97 - tristate - -config SND_BF5XX_SPORT_NUM - int "Set a SPORT for Sound chip" - depends on (SND_BF5XX_SOC_SPORT || SND_BF6XX_SOC_SPORT) - range 0 3 if BF54x - range 0 1 if !BF54x - default 0 - help - Set the correct SPORT for sound chip. |