summaryrefslogtreecommitdiff
path: root/sound/soc/codecs/rt5677-spi.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/codecs/rt5677-spi.c')
-rw-r--r--sound/soc/codecs/rt5677-spi.c43
1 files changed, 24 insertions, 19 deletions
diff --git a/sound/soc/codecs/rt5677-spi.c b/sound/soc/codecs/rt5677-spi.c
index 84501c2020c7..84b6bd8b50e1 100644
--- a/sound/soc/codecs/rt5677-spi.c
+++ b/sound/soc/codecs/rt5677-spi.c
@@ -25,6 +25,7 @@
#include <linux/sysfs.h>
#include <linux/clk.h>
#include <linux/firmware.h>
+#include <linux/acpi.h>
#include "rt5677-spi.h"
@@ -57,13 +58,15 @@ static DEFINE_MUTEX(spi_mutex);
* RT5677_SPI_READ/WRITE_32: Transfer 4 bytes
* RT5677_SPI_READ/WRITE_BURST: Transfer any multiples of 8 bytes
*
- * For example, reading 260 bytes at 0x60030002 uses the following commands:
- * 0x60030002 RT5677_SPI_READ_16 2 bytes
+ * Note:
+ * 16 Bit writes and reads are restricted to the address range
+ * 0x18020000 ~ 0x18021000
+ *
+ * For example, reading 256 bytes at 0x60030004 uses the following commands:
* 0x60030004 RT5677_SPI_READ_32 4 bytes
* 0x60030008 RT5677_SPI_READ_BURST 240 bytes
* 0x600300F8 RT5677_SPI_READ_BURST 8 bytes
* 0x60030100 RT5677_SPI_READ_32 4 bytes
- * 0x60030104 RT5677_SPI_READ_16 2 bytes
*
* Input:
* @read: true for read commands; false for write commands
@@ -78,15 +81,13 @@ static u8 rt5677_spi_select_cmd(bool read, u32 align, u32 remain, u32 *len)
{
u8 cmd;
- if (align == 2 || align == 6 || remain == 2) {
- cmd = RT5677_SPI_READ_16;
- *len = 2;
- } else if (align == 4 || remain <= 6) {
+ if (align == 4 || remain <= 4) {
cmd = RT5677_SPI_READ_32;
*len = 4;
} else {
cmd = RT5677_SPI_READ_BURST;
- *len = min_t(u32, remain & ~7, RT5677_SPI_BURST_LEN);
+ *len = (((remain - 1) >> 3) + 1) << 3;
+ *len = min_t(u32, *len, RT5677_SPI_BURST_LEN);
}
return read ? cmd : cmd + 1;
}
@@ -107,7 +108,7 @@ static void rt5677_spi_reverse(u8 *dst, u32 dstlen, const u8 *src, u32 srclen)
}
}
-/* Read DSP address space using SPI. addr and len have to be 2-byte aligned. */
+/* Read DSP address space using SPI. addr and len have to be 4-byte aligned. */
int rt5677_spi_read(u32 addr, void *rxbuf, size_t len)
{
u32 offset;
@@ -123,7 +124,7 @@ int rt5677_spi_read(u32 addr, void *rxbuf, size_t len)
if (!g_spi)
return -ENODEV;
- if ((addr & 1) || (len & 1)) {
+ if ((addr & 3) || (len & 3)) {
dev_err(&g_spi->dev, "Bad read align 0x%x(%zu)\n", addr, len);
return -EACCES;
}
@@ -158,13 +159,13 @@ int rt5677_spi_read(u32 addr, void *rxbuf, size_t len)
}
EXPORT_SYMBOL_GPL(rt5677_spi_read);
-/* Write DSP address space using SPI. addr has to be 2-byte aligned.
- * If len is not 2-byte aligned, an extra byte of zero is written at the end
+/* Write DSP address space using SPI. addr has to be 4-byte aligned.
+ * If len is not 4-byte aligned, then extra zeros are written at the end
* as padding.
*/
int rt5677_spi_write(u32 addr, const void *txbuf, size_t len)
{
- u32 offset, len_with_pad = len;
+ u32 offset;
int status = 0;
struct spi_transfer t;
struct spi_message m;
@@ -177,22 +178,19 @@ int rt5677_spi_write(u32 addr, const void *txbuf, size_t len)
if (!g_spi)
return -ENODEV;
- if (addr & 1) {
+ if (addr & 3) {
dev_err(&g_spi->dev, "Bad write align 0x%x(%zu)\n", addr, len);
return -EACCES;
}
- if (len & 1)
- len_with_pad = len + 1;
-
memset(&t, 0, sizeof(t));
t.tx_buf = buf;
t.speed_hz = RT5677_SPI_FREQ;
spi_message_init_with_transfers(&m, &t, 1);
- for (offset = 0; offset < len_with_pad;) {
+ for (offset = 0; offset < len;) {
spi_cmd = rt5677_spi_select_cmd(false, (addr + offset) & 7,
- len_with_pad - offset, &t.len);
+ len - offset, &t.len);
/* Construct SPI message header */
buf[0] = spi_cmd;
@@ -226,9 +224,16 @@ static int rt5677_spi_probe(struct spi_device *spi)
return 0;
}
+static const struct acpi_device_id rt5677_spi_acpi_id[] = {
+ { "RT5677AA", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, rt5677_spi_acpi_id);
+
static struct spi_driver rt5677_spi_driver = {
.driver = {
.name = "rt5677",
+ .acpi_match_table = ACPI_PTR(rt5677_spi_acpi_id),
},
.probe = rt5677_spi_probe,
};