diff options
Diffstat (limited to 'tools/testing/selftests/drivers')
16 files changed, 1724 insertions, 94 deletions
diff --git a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_exceptions.sh b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_exceptions.sh index 1fedfc9da434..42d44e27802c 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_exceptions.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_exceptions.sh @@ -446,6 +446,35 @@ __invalid_nexthop_test() log_test "Unresolved neigh: nexthop does not exist: $desc" } +__invalid_nexthop_bucket_test() +{ + local desc=$1; shift + local dip=$1; shift + local via_add=$1; shift + local trap_name="unresolved_neigh" + + RET=0 + + # Check that route to nexthop that does not exist triggers + # unresolved_neigh + ip nexthop add id 1 via $via_add dev $rp2 + ip nexthop add id 10 group 1 type resilient buckets 32 + ip route add $dip nhid 10 + + t0_packets=$(devlink_trap_rx_packets_get $trap_name) + ping_do $h1 $dip + t1_packets=$(devlink_trap_rx_packets_get $trap_name) + + if [[ $t0_packets -eq $t1_packets ]]; then + check_err 1 "Trap counter did not increase" + fi + + ip route del $dip nhid 10 + ip nexthop del id 10 + ip nexthop del id 1 + log_test "Unresolved neigh: nexthop bucket does not exist: $desc" +} + unresolved_neigh_test() { __host_miss_test "IPv4" 198.51.100.1 @@ -453,6 +482,8 @@ unresolved_neigh_test() __invalid_nexthop_test "IPv4" 198.51.100.1 198.51.100.3 24 198.51.100.4 __invalid_nexthop_test "IPv6" 2001:db8:2::1 2001:db8:2::3 64 \ 2001:db8:2::4 + __invalid_nexthop_bucket_test "IPv4" 198.51.100.1 198.51.100.4 + __invalid_nexthop_bucket_test "IPv6" 2001:db8:2::1 2001:db8:2::4 } vrf_without_routes_create() diff --git a/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh index 6f3a70df63bc..e00435753008 100644 --- a/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh @@ -120,12 +120,13 @@ __mirror_gre_test() sleep 5 for ((i = 0; i < count; ++i)); do + local sip=$(mirror_gre_ipv6_addr 1 $i)::1 local dip=$(mirror_gre_ipv6_addr 1 $i)::2 local htun=h3-gt6-$i local message icmp6_capture_install $htun - mirror_test v$h1 "" $dip $htun 100 10 + mirror_test v$h1 $sip $dip $htun 100 10 icmp6_capture_uninstall $htun done } diff --git a/tools/testing/selftests/drivers/net/mlxsw/port_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/port_scale.sh index f813ffefc07e..65f43a7ce9c9 100644 --- a/tools/testing/selftests/drivers/net/mlxsw/port_scale.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/port_scale.sh @@ -55,10 +55,6 @@ port_test() | jq '.[][][] | select(.name=="physical_ports") |.["occ"]') [[ $occ -eq $max_ports ]] - if [[ $should_fail -eq 0 ]]; then - check_err $? "Mismatch ports number: Expected $max_ports, got $occ." - else - check_err_fail $should_fail $? "Reached more ports than expected" - fi + check_err_fail $should_fail $? "Attempt to create $max_ports ports (actual result $occ)" } diff --git a/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh b/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh index ed346da5d3cb..a217f9f6775b 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh @@ -33,6 +33,7 @@ ALL_TESTS=" nexthop_obj_invalid_test nexthop_obj_offload_test nexthop_obj_group_offload_test + nexthop_obj_bucket_offload_test nexthop_obj_blackhole_offload_test nexthop_obj_route_offload_test devlink_reload_test @@ -739,11 +740,28 @@ nexthop_obj_invalid_test() ip nexthop add id 1 dev $swp1 ip nexthop add id 2 dev $swp1 + ip nexthop add id 3 via 192.0.2.3 dev $swp1 ip nexthop add id 10 group 1/2 check_fail $? "managed to configure a nexthop group with device-only nexthops when should not" + ip nexthop add id 10 group 3 type resilient buckets 7 + check_fail $? "managed to configure a too small resilient nexthop group when should not" + + ip nexthop add id 10 group 3 type resilient buckets 129 + check_fail $? "managed to configure a resilient nexthop group with invalid number of buckets when should not" + + ip nexthop add id 10 group 1/2 type resilient buckets 32 + check_fail $? "managed to configure a resilient nexthop group with device-only nexthops when should not" + + ip nexthop add id 10 group 3 type resilient buckets 32 + check_err $? "failed to configure a valid resilient nexthop group" + ip nexthop replace id 3 dev $swp1 + check_fail $? "managed to populate a nexthop bucket with a device-only nexthop when should not" + log_test "nexthop objects - invalid configurations" + ip nexthop del id 10 + ip nexthop del id 3 ip nexthop del id 2 ip nexthop del id 1 @@ -858,6 +876,70 @@ nexthop_obj_group_offload_test() simple_if_fini $swp1 192.0.2.1/24 2001:db8:1::1/64 } +nexthop_obj_bucket_offload_test() +{ + # Test offload indication of nexthop buckets + RET=0 + + simple_if_init $swp1 192.0.2.1/24 2001:db8:1::1/64 + simple_if_init $swp2 + setup_wait + + ip nexthop add id 1 via 192.0.2.2 dev $swp1 + ip nexthop add id 2 via 2001:db8:1::2 dev $swp1 + ip nexthop add id 10 group 1/2 type resilient buckets 32 idle_timer 0 + ip neigh replace 192.0.2.2 lladdr 00:11:22:33:44:55 nud reachable \ + dev $swp1 + ip neigh replace 192.0.2.3 lladdr 00:11:22:33:44:55 nud reachable \ + dev $swp1 + ip neigh replace 2001:db8:1::2 lladdr 00:11:22:33:44:55 nud reachable \ + dev $swp1 + + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop bucket show nhid 1 + check_err $? "IPv4 nexthop buckets not marked as offloaded when should" + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop bucket show nhid 2 + check_err $? "IPv6 nexthop buckets not marked as offloaded when should" + + # Invalidate nexthop id 1 + ip neigh replace 192.0.2.2 nud failed dev $swp1 + busywait "$TIMEOUT" wait_for_trap \ + ip nexthop bucket show nhid 1 + check_err $? "IPv4 nexthop buckets not marked with trap when should" + + # Invalidate nexthop id 2 + ip neigh replace 2001:db8:1::2 nud failed dev $swp1 + busywait "$TIMEOUT" wait_for_trap \ + ip nexthop bucket show nhid 2 + check_err $? "IPv6 nexthop buckets not marked with trap when should" + + # Revalidate nexthop id 1 by changing its configuration + ip nexthop replace id 1 via 192.0.2.3 dev $swp1 + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop bucket show nhid 1 + check_err $? "nexthop bucket not marked as offloaded after revalidating nexthop" + + # Revalidate nexthop id 2 by changing its neighbour + ip neigh replace 2001:db8:1::2 lladdr 00:11:22:33:44:55 nud reachable \ + dev $swp1 + busywait "$TIMEOUT" wait_for_offload \ + ip nexthop bucket show nhid 2 + check_err $? "nexthop bucket not marked as offloaded after revalidating neighbour" + + log_test "nexthop bucket offload indication" + + ip neigh del 2001:db8:1::2 dev $swp1 + ip neigh del 192.0.2.3 dev $swp1 + ip neigh del 192.0.2.2 dev $swp1 + ip nexthop del id 10 + ip nexthop del id 2 + ip nexthop del id 1 + + simple_if_fini $swp2 + simple_if_fini $swp1 192.0.2.1/24 2001:db8:1::1/64 +} + nexthop_obj_blackhole_offload_test() { # Test offload indication of blackhole nexthop objects diff --git a/tools/testing/selftests/drivers/net/mlxsw/sch_red_core.sh b/tools/testing/selftests/drivers/net/mlxsw/sch_red_core.sh index b0cb1aaffdda..33ddd01689be 100644 --- a/tools/testing/selftests/drivers/net/mlxsw/sch_red_core.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/sch_red_core.sh @@ -507,8 +507,8 @@ do_red_test() check_err $? "backlog $backlog / $limit Got $pct% marked packets, expected == 0." local diff=$((limit - backlog)) pct=$((100 * diff / limit)) - ((0 <= pct && pct <= 5)) - check_err $? "backlog $backlog / $limit expected <= 5% distance" + ((0 <= pct && pct <= 10)) + check_err $? "backlog $backlog / $limit expected <= 10% distance" log_test "TC $((vlan - 10)): RED backlog > limit" stop_traffic diff --git a/tools/testing/selftests/drivers/net/mlxsw/sch_red_ets.sh b/tools/testing/selftests/drivers/net/mlxsw/sch_red_ets.sh index 3f007c5f8361..f3ef3274f9b3 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/sch_red_ets.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/sch_red_ets.sh @@ -67,6 +67,13 @@ red_test() { install_qdisc + # Make sure that we get the non-zero value if there is any. + local cur=$(busywait 1100 until_counter_is "> 0" \ + qdisc_stats_get $swp3 10: .backlog) + (( cur == 0 )) + check_err $? "backlog of $cur observed on non-busy qdisc" + log_test "$QDISC backlog properly cleaned" + do_red_test 10 $BACKLOG1 do_red_test 11 $BACKLOG2 diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/q_in_vni_veto.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/q_in_vni_veto.sh deleted file mode 100755 index 0231205a7147..000000000000 --- a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/q_in_vni_veto.sh +++ /dev/null @@ -1,77 +0,0 @@ -#!/bin/bash -# SPDX-License-Identifier: GPL-2.0 - -lib_dir=$(dirname $0)/../../../../net/forwarding - -VXPORT=4789 - -ALL_TESTS=" - create_dot1d_and_dot1ad_vxlans -" -NUM_NETIFS=2 -source $lib_dir/lib.sh - -setup_prepare() -{ - swp1=${NETIFS[p1]} - swp2=${NETIFS[p2]} - - ip link set dev $swp1 up - ip link set dev $swp2 up -} - -cleanup() -{ - pre_cleanup - - ip link set dev $swp2 down - ip link set dev $swp1 down -} - -create_dot1d_and_dot1ad_vxlans() -{ - RET=0 - - ip link add dev br0 type bridge vlan_filtering 1 vlan_protocol 802.1ad \ - vlan_default_pvid 0 mcast_snooping 0 - ip link set dev br0 up - - ip link add name vx100 type vxlan id 1000 local 192.0.2.17 dstport \ - "$VXPORT" nolearning noudpcsum tos inherit ttl 100 - ip link set dev vx100 up - - ip link set dev $swp1 master br0 - ip link set dev vx100 master br0 - bridge vlan add vid 100 dev vx100 pvid untagged - - ip link add dev br1 type bridge vlan_filtering 0 mcast_snooping 0 - ip link set dev br1 up - - ip link add name vx200 type vxlan id 2000 local 192.0.2.17 dstport \ - "$VXPORT" nolearning noudpcsum tos inherit ttl 100 - ip link set dev vx200 up - - ip link set dev $swp2 master br1 - ip link set dev vx200 master br1 2>/dev/null - check_fail $? "802.1d and 802.1ad VxLANs at the same time not rejected" - - ip link set dev vx200 master br1 2>&1 >/dev/null \ - | grep -q mlxsw_spectrum - check_err $? "802.1d and 802.1ad VxLANs at the same time rejected without extack" - - log_test "create 802.1d and 802.1ad VxLANs" - - ip link del dev vx200 - ip link del dev br1 - ip link del dev vx100 - ip link del dev br0 -} - -trap cleanup EXIT - -setup_prepare -setup_wait - -tests_run - -exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh index 4a1c9328555f..50654f8a8c37 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh @@ -30,6 +30,7 @@ trap cleanup EXIT ALL_TESTS="router tc_flower mirror_gre tc_police port" for current_test in ${TESTS:-$ALL_TESTS}; do + RET_FIN=0 source ${current_test}_scale.sh num_netifs_var=${current_test^^}_NUM_NETIFS @@ -48,8 +49,9 @@ for current_test in ${TESTS:-$ALL_TESTS}; do else log_test "'$current_test' overflow $target" fi + RET_FIN=$(( RET_FIN || RET )) done done current_test="" -exit "$RET" +exit "$RET_FIN" diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh index 087a884f66cd..685dfb3478b3 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh @@ -24,6 +24,7 @@ trap cleanup EXIT ALL_TESTS="router tc_flower mirror_gre tc_police port" for current_test in ${TESTS:-$ALL_TESTS}; do + RET_FIN=0 source ${current_test}_scale.sh num_netifs_var=${current_test^^}_NUM_NETIFS @@ -50,8 +51,9 @@ for current_test in ${TESTS:-$ALL_TESTS}; do log_test "'$current_test' [$profile] overflow $target" fi done + RET_FIN=$(( RET_FIN || RET )) done done current_test="" -exit "$RET" +exit "$RET_FIN" diff --git a/tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh index cc0f07e72cf2..aa74be9f47c8 100644 --- a/tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh @@ -98,11 +98,7 @@ __tc_flower_test() jq -r '[ .[] | select(.kind == "flower") | .options | .in_hw ]' | jq .[] | wc -l) [[ $((offload_count - 1)) -eq $count ]] - if [[ $should_fail -eq 0 ]]; then - check_err $? "Offload mismatch" - else - check_err_fail $should_fail $? "Offload more than expacted" - fi + check_err_fail $should_fail $? "Attempt to offload $count rules (actual result $((offload_count - 1)))" } tc_flower_test() diff --git a/tools/testing/selftests/drivers/net/mlxsw/tc_restrictions.sh b/tools/testing/selftests/drivers/net/mlxsw/tc_restrictions.sh index 553cb9fad508..5ec3beb637c8 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/tc_restrictions.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/tc_restrictions.sh @@ -11,6 +11,7 @@ ALL_TESTS=" matchall_mirror_behind_flower_ingress_test matchall_sample_behind_flower_ingress_test matchall_mirror_behind_flower_egress_test + matchall_proto_match_test police_limits_test multi_police_test " @@ -18,6 +19,7 @@ NUM_NETIFS=2 source $lib_dir/tc_common.sh source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh switch_create() { @@ -166,7 +168,8 @@ matchall_sample_egress_test() RET=0 # It is forbidden in mlxsw driver to have matchall with sample action - # bound on egress + # bound on egress. Spectrum-1 specific restriction + [[ "$DEVLINK_VIDDID" != "15b3:cb84" ]] && return tc qdisc add dev $swp1 clsact @@ -289,6 +292,22 @@ matchall_mirror_behind_flower_egress_test() matchall_behind_flower_egress_test "mirror" "mirred egress mirror dev $swp2" } +matchall_proto_match_test() +{ + RET=0 + + tc qdisc add dev $swp1 clsact + + tc filter add dev $swp1 ingress pref 1 proto ip handle 101 \ + matchall skip_sw \ + action sample group 1 rate 100 + check_fail $? "Incorrect success to add matchall rule with protocol match" + + tc qdisc del dev $swp1 clsact + + log_test "matchall protocol match" +} + police_limits_test() { RET=0 diff --git a/tools/testing/selftests/drivers/net/mlxsw/tc_sample.sh b/tools/testing/selftests/drivers/net/mlxsw/tc_sample.sh new file mode 100755 index 000000000000..093bed088ad0 --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/tc_sample.sh @@ -0,0 +1,657 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test that packets are sampled when tc-sample is used and that reported +# metadata is correct. Two sets of hosts (with and without LAG) are used, since +# metadata extraction in mlxsw is a bit different when LAG is involved. +# +# +---------------------------------+ +---------------------------------+ +# | H1 (vrf) | | H3 (vrf) | +# | + $h1 | | + $h3_lag | +# | | 192.0.2.1/28 | | | 192.0.2.17/28 | +# | | | | | | +# | | default via 192.0.2.2 | | | default via 192.0.2.18 | +# +----|----------------------------+ +----|----------------------------+ +# | | +# +----|-----------------------------------------|----------------------------+ +# | | 192.0.2.2/28 | 192.0.2.18/28 | +# | + $rp1 + $rp3_lag | +# | | +# | + $rp2 + $rp4_lag | +# | | 198.51.100.2/28 | 198.51.100.18/28 | +# +----|-----------------------------------------|----------------------------+ +# | | +# +----|----------------------------+ +----|----------------------------+ +# | | default via 198.51.100.2 | | | default via 198.51.100.18 | +# | | | | | | +# | | 198.51.100.1/28 | | | 198.51.100.17/28 | +# | + $h2 | | + $h4_lag | +# | H2 (vrf) | | H4 (vrf) | +# +---------------------------------+ +---------------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + tc_sample_rate_test + tc_sample_max_rate_test + tc_sample_conflict_test + tc_sample_group_conflict_test + tc_sample_md_iif_test + tc_sample_md_lag_iif_test + tc_sample_md_oif_test + tc_sample_md_lag_oif_test + tc_sample_md_out_tc_test + tc_sample_md_out_tc_occ_test + tc_sample_md_latency_test + tc_sample_acl_group_conflict_test + tc_sample_acl_rate_test + tc_sample_acl_max_rate_test +" +NUM_NETIFS=8 +CAPTURE_FILE=$(mktemp) +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +# Available at https://github.com/Mellanox/libpsample +require_command psample + +h1_create() +{ + simple_if_init $h1 192.0.2.1/28 + + ip -4 route add default vrf v$h1 nexthop via 192.0.2.2 +} + +h1_destroy() +{ + ip -4 route del default vrf v$h1 nexthop via 192.0.2.2 + + simple_if_fini $h1 192.0.2.1/28 +} + +h2_create() +{ + simple_if_init $h2 198.51.100.1/28 + + ip -4 route add default vrf v$h2 nexthop via 198.51.100.2 +} + +h2_destroy() +{ + ip -4 route del default vrf v$h2 nexthop via 198.51.100.2 + + simple_if_fini $h2 198.51.100.1/28 +} + +h3_create() +{ + ip link set dev $h3 down + ip link add name ${h3}_bond type bond mode 802.3ad + ip link set dev $h3 master ${h3}_bond + + simple_if_init ${h3}_bond 192.0.2.17/28 + + ip -4 route add default vrf v${h3}_bond nexthop via 192.0.2.18 +} + +h3_destroy() +{ + ip -4 route del default vrf v${h3}_bond nexthop via 192.0.2.18 + + simple_if_fini ${h3}_bond 192.0.2.17/28 + + ip link set dev $h3 nomaster + ip link del dev ${h3}_bond +} + +h4_create() +{ + ip link set dev $h4 down + ip link add name ${h4}_bond type bond mode 802.3ad + ip link set dev $h4 master ${h4}_bond + + simple_if_init ${h4}_bond 198.51.100.17/28 + + ip -4 route add default vrf v${h4}_bond nexthop via 198.51.100.18 +} + +h4_destroy() +{ + ip -4 route del default vrf v${h4}_bond nexthop via 198.51.100.18 + + simple_if_fini ${h4}_bond 198.51.100.17/28 + + ip link set dev $h4 nomaster + ip link del dev ${h4}_bond +} + +router_create() +{ + ip link set dev $rp1 up + __addr_add_del $rp1 add 192.0.2.2/28 + tc qdisc add dev $rp1 clsact + + ip link set dev $rp2 up + __addr_add_del $rp2 add 198.51.100.2/28 + tc qdisc add dev $rp2 clsact + + ip link add name ${rp3}_bond type bond mode 802.3ad + ip link set dev $rp3 master ${rp3}_bond + __addr_add_del ${rp3}_bond add 192.0.2.18/28 + tc qdisc add dev $rp3 clsact + ip link set dev ${rp3}_bond up + + ip link add name ${rp4}_bond type bond mode 802.3ad + ip link set dev $rp4 master ${rp4}_bond + __addr_add_del ${rp4}_bond add 198.51.100.18/28 + tc qdisc add dev $rp4 clsact + ip link set dev ${rp4}_bond up +} + +router_destroy() +{ + ip link set dev ${rp4}_bond down + tc qdisc del dev $rp4 clsact + __addr_add_del ${rp4}_bond del 198.51.100.18/28 + ip link set dev $rp4 nomaster + ip link del dev ${rp4}_bond + + ip link set dev ${rp3}_bond down + tc qdisc del dev $rp3 clsact + __addr_add_del ${rp3}_bond del 192.0.2.18/28 + ip link set dev $rp3 nomaster + ip link del dev ${rp3}_bond + + tc qdisc del dev $rp2 clsact + __addr_add_del $rp2 del 198.51.100.2/28 + ip link set dev $rp2 down + + tc qdisc del dev $rp1 clsact + __addr_add_del $rp1 del 192.0.2.2/28 + ip link set dev $rp1 down +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + rp1=${NETIFS[p2]} + rp2=${NETIFS[p3]} + h2=${NETIFS[p4]} + h3=${NETIFS[p5]} + rp3=${NETIFS[p6]} + h4=${NETIFS[p7]} + rp4=${NETIFS[p8]} + + vrf_prepare + + h1_create + h2_create + h3_create + h4_create + router_create +} + +cleanup() +{ + pre_cleanup + + rm -f $CAPTURE_FILE + + router_destroy + h4_destroy + h3_destroy + h2_destroy + h1_destroy + + vrf_cleanup +} + +psample_capture_start() +{ + rm -f $CAPTURE_FILE + + psample &> $CAPTURE_FILE & + + sleep 1 +} + +psample_capture_stop() +{ + { kill %% && wait %%; } 2>/dev/null +} + +__tc_sample_rate_test() +{ + local desc=$1; shift + local dip=$1; shift + local pkts pct + + RET=0 + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 32 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \ + -B $dip -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + pkts=$(grep -e "group 1 " $CAPTURE_FILE | wc -l) + pct=$((100 * (pkts - 100) / 100)) + (( -25 <= pct && pct <= 25)) + check_err $? "Expected 100 packets, got $pkts packets, which is $pct% off. Required accuracy is +-25%" + + log_test "tc sample rate ($desc)" + + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_rate_test() +{ + __tc_sample_rate_test "forward" 198.51.100.1 + __tc_sample_rate_test "local receive" 192.0.2.2 +} + +tc_sample_max_rate_test() +{ + RET=0 + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate $((35 * 10 ** 8)) group 1 + check_err $? "Failed to configure sampling rule with max rate" + + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate $((35 * 10 ** 8 + 1)) \ + group 1 &> /dev/null + check_fail $? "Managed to configure sampling rate above maximum" + + log_test "tc sample maximum rate" +} + +tc_sample_conflict_test() +{ + RET=0 + + # Test that two sampling rules cannot be configured on the same port, + # even when they share the same parameters. + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 1024 group 1 + check_err $? "Failed to configure sampling rule" + + tc filter add dev $rp1 ingress protocol all pref 2 handle 102 matchall \ + skip_sw action sample rate 1024 group 1 &> /dev/null + check_fail $? "Managed to configure second sampling rule" + + # Delete the first rule and make sure the second rule can now be + # configured. + + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall + + tc filter add dev $rp1 ingress protocol all pref 2 handle 102 matchall \ + skip_sw action sample rate 1024 group 1 + check_err $? "Failed to configure sampling rule after deletion" + + log_test "tc sample conflict test" + + tc filter del dev $rp1 ingress protocol all pref 2 handle 102 matchall +} + +tc_sample_group_conflict_test() +{ + RET=0 + + # Test that two sampling rules cannot be configured on the same port + # with different groups. + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 1024 group 1 + check_err $? "Failed to configure sampling rule" + + tc filter add dev $rp1 ingress protocol all pref 2 handle 102 matchall \ + skip_sw action sample rate 1024 group 2 &> /dev/null + check_fail $? "Managed to configure sampling rule with conflicting group" + + log_test "tc sample group conflict test" + + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_md_iif_test() +{ + local rp1_ifindex + + RET=0 + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 5 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + rp1_ifindex=$(ip -j -p link show dev $rp1 | jq '.[]["ifindex"]') + grep -q -e "in-ifindex $rp1_ifindex " $CAPTURE_FILE + check_err $? "Sampled packets do not have expected in-ifindex" + + log_test "tc sample iif" + + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_md_lag_iif_test() +{ + local rp3_ifindex + + RET=0 + + tc filter add dev $rp3 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 5 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v${h3}_bond $MZ ${h3}_bond -c 3200 -d 1msec -p 64 \ + -A 192.0.2.17 -B 198.51.100.17 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + rp3_ifindex=$(ip -j -p link show dev $rp3 | jq '.[]["ifindex"]') + grep -q -e "in-ifindex $rp3_ifindex " $CAPTURE_FILE + check_err $? "Sampled packets do not have expected in-ifindex" + + log_test "tc sample lag iif" + + tc filter del dev $rp3 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_md_oif_test() +{ + local rp2_ifindex + + RET=0 + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 5 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + rp2_ifindex=$(ip -j -p link show dev $rp2 | jq '.[]["ifindex"]') + grep -q -e "out-ifindex $rp2_ifindex " $CAPTURE_FILE + check_err $? "Sampled packets do not have expected out-ifindex" + + log_test "tc sample oif" + + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_md_lag_oif_test() +{ + local rp4_ifindex + + RET=0 + + tc filter add dev $rp3 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 5 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v${h3}_bond $MZ ${h3}_bond -c 3200 -d 1msec -p 64 \ + -A 192.0.2.17 -B 198.51.100.17 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + rp4_ifindex=$(ip -j -p link show dev $rp4 | jq '.[]["ifindex"]') + grep -q -e "out-ifindex $rp4_ifindex " $CAPTURE_FILE + check_err $? "Sampled packets do not have expected out-ifindex" + + log_test "tc sample lag oif" + + tc filter del dev $rp3 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_md_out_tc_test() +{ + RET=0 + + # Output traffic class is not supported on Spectrum-1. + [[ "$DEVLINK_VIDDID" == "15b3:cb84" ]] && return + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 5 group 1 + check_err $? "Failed to configure sampling rule" + + # By default, all the packets should go to the same traffic class (0). + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + grep -q -e "out-tc 0 " $CAPTURE_FILE + check_err $? "Sampled packets do not have expected out-tc (0)" + + # Map all priorities to highest traffic class (7) and check reported + # out-tc. + tc qdisc replace dev $rp2 root handle 1: \ + prio bands 3 priomap 0 0 0 0 0 0 0 0 + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + grep -q -e "out-tc 7 " $CAPTURE_FILE + check_err $? "Sampled packets do not have expected out-tc (7)" + + log_test "tc sample out-tc" + + tc qdisc del dev $rp2 root handle 1: + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_md_out_tc_occ_test() +{ + local backlog pct occ + + RET=0 + + # Output traffic class occupancy is not supported on Spectrum-1. + [[ "$DEVLINK_VIDDID" == "15b3:cb84" ]] && return + + tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 1024 group 1 + check_err $? "Failed to configure sampling rule" + + # Configure a shaper on egress to create congestion. + tc qdisc replace dev $rp2 root handle 1: \ + tbf rate 1Mbit burst 256k limit 1M + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 0 -d 1usec -p 1400 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q & + + # Allow congestion to reach steady state. + sleep 10 + + backlog=$(tc -j -p -s qdisc show dev $rp2 | jq '.[0]["backlog"]') + + # Kill mausezahn. + { kill %% && wait %%; } 2>/dev/null + + psample_capture_stop + + # Record last congestion sample. + occ=$(grep -e "out-tc-occ " $CAPTURE_FILE | tail -n 1 | \ + cut -d ' ' -f 16) + + pct=$((100 * (occ - backlog) / backlog)) + (( -1 <= pct && pct <= 1)) + check_err $? "Recorded a congestion of $backlog bytes, but sampled congestion is $occ bytes, which is $pct% off. Required accuracy is +-5%" + + log_test "tc sample out-tc-occ" + + tc qdisc del dev $rp2 root handle 1: + tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall +} + +tc_sample_md_latency_test() +{ + RET=0 + + # Egress sampling not supported on Spectrum-1. + [[ "$DEVLINK_VIDDID" == "15b3:cb84" ]] && return + + tc filter add dev $rp2 egress protocol all pref 1 handle 101 matchall \ + skip_sw action sample rate 5 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + grep -q -e "latency " $CAPTURE_FILE + check_err $? "Sampled packets do not have latency attribute" + + log_test "tc sample latency" + + tc filter del dev $rp2 egress protocol all pref 1 handle 101 matchall +} + +tc_sample_acl_group_conflict_test() +{ + RET=0 + + # Test that two flower sampling rules cannot be configured on the same + # port with different groups. + + # Policy-based sampling is not supported on Spectrum-1. + [[ "$DEVLINK_VIDDID" == "15b3:cb84" ]] && return + + tc filter add dev $rp1 ingress protocol ip pref 1 handle 101 flower \ + skip_sw action sample rate 1024 group 1 + check_err $? "Failed to configure sampling rule" + + tc filter add dev $rp1 ingress protocol ip pref 2 handle 102 flower \ + skip_sw action sample rate 1024 group 1 + check_err $? "Failed to configure sampling rule with same group" + + tc filter add dev $rp1 ingress protocol ip pref 3 handle 103 flower \ + skip_sw action sample rate 1024 group 2 &> /dev/null + check_fail $? "Managed to configure sampling rule with conflicting group" + + log_test "tc sample (w/ flower) group conflict test" + + tc filter del dev $rp1 ingress protocol ip pref 2 handle 102 flower + tc filter del dev $rp1 ingress protocol ip pref 1 handle 101 flower +} + +__tc_sample_acl_rate_test() +{ + local bind=$1; shift + local port=$1; shift + local pkts pct + + RET=0 + + # Policy-based sampling is not supported on Spectrum-1. + [[ "$DEVLINK_VIDDID" == "15b3:cb84" ]] && return + + tc filter add dev $port $bind protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 198.51.100.1 action sample rate 32 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + pkts=$(grep -e "group 1 " $CAPTURE_FILE | wc -l) + pct=$((100 * (pkts - 100) / 100)) + (( -25 <= pct && pct <= 25)) + check_err $? "Expected 100 packets, got $pkts packets, which is $pct% off. Required accuracy is +-25%" + + # Setup a filter that should not match any packet and make sure packets + # are not sampled. + tc filter del dev $port $bind protocol ip pref 1 handle 101 flower + + tc filter add dev $port $bind protocol ip pref 1 handle 101 flower \ + skip_sw dst_ip 198.51.100.10 action sample rate 32 group 1 + check_err $? "Failed to configure sampling rule" + + psample_capture_start + + ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \ + -B 198.51.100.1 -t udp dp=52768,sp=42768 -q + + psample_capture_stop + + grep -q -e "group 1 " $CAPTURE_FILE + check_fail $? "Sampled packets when should not" + + log_test "tc sample (w/ flower) rate ($bind)" + + tc filter del dev $port $bind protocol ip pref 1 handle 101 flower +} + +tc_sample_acl_rate_test() +{ + __tc_sample_acl_rate_test ingress $rp1 + __tc_sample_acl_rate_test egress $rp2 +} + +tc_sample_acl_max_rate_test() +{ + RET=0 + + # Policy-based sampling is not supported on Spectrum-1. + [[ "$DEVLINK_VIDDID" == "15b3:cb84" ]] && return + + tc filter add dev $rp1 ingress protocol ip pref 1 handle 101 flower \ + skip_sw action sample rate $((2 ** 24 - 1)) group 1 + check_err $? "Failed to configure sampling rule with max rate" + + tc filter del dev $rp1 ingress protocol ip pref 1 handle 101 flower + + tc filter add dev $rp1 ingress protocol ip pref 1 handle 101 flower \ + skip_sw action sample rate $((2 ** 24)) \ + group 1 &> /dev/null + check_fail $? "Managed to configure sampling rate above maximum" + + log_test "tc sample (w/ flower) maximum rate" +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh index 9f64d5c7107b..7ca1f030d209 100644 --- a/tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh +++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-common.sh @@ -24,8 +24,11 @@ function check { local code=$1 local str=$2 local exp_str=$3 + local exp_fail=$4 - if [ $code -ne 0 ]; then + [ -z "$exp_fail" ] && cop="-ne" || cop="-eq" + + if [ $code $cop 0 ]; then ((num_errors++)) return fi diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh new file mode 100755 index 000000000000..0c56746e9ce0 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh @@ -0,0 +1,110 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-only + +source ethtool-common.sh + +NSIM_NETDEV=$(make_netdev) +[ a$ETHTOOL == a ] && ETHTOOL=ethtool + +set -o pipefail + +# netdevsim starts out with None/None +s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) +check $? "$s" "Configured FEC encodings: None +Active FEC encoding: None" + +# Test Auto +$ETHTOOL --set-fec $NSIM_NETDEV encoding auto +check $? +s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) +check $? "$s" "Configured FEC encodings: Auto +Active FEC encoding: Off" + +# Test case in-sensitivity +for o in off Off OFF; do + $ETHTOOL --set-fec $NSIM_NETDEV encoding $o + check $? + s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) + check $? "$s" "Configured FEC encodings: Off +Active FEC encoding: Off" +done + +for o in BaseR baser BAser; do + $ETHTOOL --set-fec $NSIM_NETDEV encoding $o + check $? + s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) + check $? "$s" "Configured FEC encodings: BaseR +Active FEC encoding: BaseR" +done + +for o in llrs rs; do + $ETHTOOL --set-fec $NSIM_NETDEV encoding $o + check $? + s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) + check $? "$s" "Configured FEC encodings: ${o^^} +Active FEC encoding: ${o^^}" +done + +# Test mutliple bits +$ETHTOOL --set-fec $NSIM_NETDEV encoding rs llrs +check $? +s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) +check $? "$s" "Configured FEC encodings: RS LLRS +Active FEC encoding: LLRS" + +$ETHTOOL --set-fec $NSIM_NETDEV encoding rs off auto +check $? +s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) +check $? "$s" "Configured FEC encodings: Auto Off RS +Active FEC encoding: RS" + +# Make sure other link modes are rejected +$ETHTOOL --set-fec $NSIM_NETDEV encoding FIBRE 2>/dev/null +check $? '' '' 1 + +$ETHTOOL --set-fec $NSIM_NETDEV encoding bla-bla-bla 2>/dev/null +check $? '' '' 1 + +# Try JSON +$ETHTOOL --json --show-fec $NSIM_NETDEV | jq empty >>/dev/null 2>&1 +if [ $? -eq 0 ]; then + $ETHTOOL --set-fec $NSIM_NETDEV encoding auto + check $? + + s=$($ETHTOOL --json --show-fec $NSIM_NETDEV | jq '.[].config[]') + check $? "$s" '"Auto"' + s=$($ETHTOOL --json --show-fec $NSIM_NETDEV | jq '.[].active[]') + check $? "$s" '"Off"' + + $ETHTOOL --set-fec $NSIM_NETDEV encoding auto RS + check $? + + s=$($ETHTOOL --json --show-fec $NSIM_NETDEV | jq '.[].config[]') + check $? "$s" '"Auto" +"RS"' + s=$($ETHTOOL --json --show-fec $NSIM_NETDEV | jq '.[].active[]') + check $? "$s" '"RS"' +fi + +# Test error injection +echo 11 > $NSIM_DEV_DFS/ethtool/get_err + +$ETHTOOL --show-fec $NSIM_NETDEV >>/dev/null 2>&1 +check $? '' '' 1 + +echo 0 > $NSIM_DEV_DFS/ethtool/get_err +echo 11 > $NSIM_DEV_DFS/ethtool/set_err + +$ETHTOOL --show-fec $NSIM_NETDEV >>/dev/null 2>&1 +check $? + +$ETHTOOL --set-fec $NSIM_NETDEV encoding RS 2>/dev/null +check $? '' '' 1 + +if [ $num_errors -eq 0 ]; then + echo "PASSED all $((num_passes)) checks" + exit 0 +else + echo "FAILED $num_errors/$((num_errors+num_passes)) checks" + exit 1 +fi diff --git a/tools/testing/selftests/drivers/net/netdevsim/nexthop.sh b/tools/testing/selftests/drivers/net/netdevsim/nexthop.sh index be0c1b5ee6b8..ba75c81cda91 100755 --- a/tools/testing/selftests/drivers/net/netdevsim/nexthop.sh +++ b/tools/testing/selftests/drivers/net/netdevsim/nexthop.sh @@ -11,14 +11,33 @@ ALL_TESTS=" nexthop_single_add_err_test nexthop_group_add_test nexthop_group_add_err_test + nexthop_res_group_add_test + nexthop_res_group_add_err_test nexthop_group_replace_test nexthop_group_replace_err_test + nexthop_res_group_replace_test + nexthop_res_group_replace_err_test + nexthop_res_group_idle_timer_test + nexthop_res_group_idle_timer_del_test + nexthop_res_group_increase_idle_timer_test + nexthop_res_group_decrease_idle_timer_test + nexthop_res_group_unbalanced_timer_test + nexthop_res_group_unbalanced_timer_del_test + nexthop_res_group_no_unbalanced_timer_test + nexthop_res_group_short_unbalanced_timer_test + nexthop_res_group_increase_unbalanced_timer_test + nexthop_res_group_decrease_unbalanced_timer_test + nexthop_res_group_force_migrate_busy_test nexthop_single_replace_test nexthop_single_replace_err_test nexthop_single_in_group_replace_test nexthop_single_in_group_replace_err_test + nexthop_single_in_res_group_replace_test + nexthop_single_in_res_group_replace_err_test nexthop_single_in_group_delete_test nexthop_single_in_group_delete_err_test + nexthop_single_in_res_group_delete_test + nexthop_single_in_res_group_delete_err_test nexthop_replay_test nexthop_replay_err_test " @@ -27,6 +46,7 @@ DEV_ADDR=1337 DEV=netdevsim${DEV_ADDR} DEVLINK_DEV=netdevsim/${DEV} SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV/net/ +DEBUGFS_NET_DIR=/sys/kernel/debug/netdevsim/$DEV/ NUM_NETIFS=0 source $lib_dir/lib.sh source $lib_dir/devlink_lib.sh @@ -44,6 +64,28 @@ nexthop_check() return 0 } +nexthop_bucket_nhid_count_check() +{ + local group_id=$1; shift + local expected + local count + local nhid + local ret + + while (($# > 0)); do + nhid=$1; shift + expected=$1; shift + + count=$($IP nexthop bucket show id $group_id nhid $nhid | + grep "trap" | wc -l) + if ((expected != count)); then + return 1 + fi + done + + return 0 +} + nexthop_resource_check() { local expected_occ=$1; shift @@ -159,6 +201,71 @@ nexthop_group_add_err_test() nexthop_resource_set 9999 } +nexthop_res_group_add_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + $IP nexthop add id 10 group 1/2 type resilient buckets 4 + nexthop_check "id 10" "id 10 group 1/2 type resilient buckets 4 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_bucket_nhid_count_check 10 1 2 + check_err $? "Wrong nexthop buckets count" + nexthop_bucket_nhid_count_check 10 2 2 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 6 + check_err $? "Wrong nexthop occupancy" + + $IP nexthop del id 10 + nexthop_resource_check 2 + check_err $? "Wrong nexthop occupancy after delete" + + $IP nexthop add id 10 group 1,3/2,2 type resilient buckets 5 + nexthop_check "id 10" "id 10 group 1,3/2,2 type resilient buckets 5 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap" + check_err $? "Unexpected weighted nexthop group entry" + + nexthop_bucket_nhid_count_check 10 1 3 + check_err $? "Wrong nexthop buckets count" + nexthop_bucket_nhid_count_check 10 2 2 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 7 + check_err $? "Wrong weighted nexthop occupancy" + + $IP nexthop del id 10 + nexthop_resource_check 2 + check_err $? "Wrong nexthop occupancy after delete" + + log_test "Resilient nexthop group add and delete" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_add_err_test() +{ + RET=0 + + nexthop_resource_set 2 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + $IP nexthop add id 10 group 1/2 type resilient buckets 4 &> /dev/null + check_fail $? "Nexthop group addition succeeded when should fail" + + nexthop_resource_check 2 + check_err $? "Wrong nexthop occupancy" + + log_test "Resilient nexthop group add failure" + + $IP nexthop flush &> /dev/null + nexthop_resource_set 9999 +} + nexthop_group_replace_test() { RET=0 @@ -206,6 +313,411 @@ nexthop_group_replace_err_test() nexthop_resource_set 9999 } +nexthop_res_group_replace_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.4 dev dummy1 + $IP nexthop add id 10 group 1/2 type resilient buckets 6 + + $IP nexthop replace id 10 group 1/2/3 type resilient + nexthop_check "id 10" "id 10 group 1/2/3 type resilient buckets 6 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_bucket_nhid_count_check 10 1 2 + check_err $? "Wrong nexthop buckets count" + nexthop_bucket_nhid_count_check 10 2 2 + check_err $? "Wrong nexthop buckets count" + nexthop_bucket_nhid_count_check 10 3 2 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 9 + check_err $? "Wrong nexthop occupancy" + + log_test "Resilient nexthop group replace" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_replace_err_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.4 dev dummy1 + $IP nexthop add id 10 group 1/2 type resilient buckets 6 + + ip netns exec testns1 \ + echo 1 > $DEBUGFS_NET_DIR/fib/fail_res_nexthop_group_replace + $IP nexthop replace id 10 group 1/2/3 type resilient &> /dev/null + check_fail $? "Nexthop group replacement succeeded when should fail" + + nexthop_check "id 10" "id 10 group 1/2 type resilient buckets 6 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap" + check_err $? "Unexpected nexthop group entry after failure" + + nexthop_bucket_nhid_count_check 10 1 3 + check_err $? "Wrong nexthop buckets count" + nexthop_bucket_nhid_count_check 10 2 3 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 9 + check_err $? "Wrong nexthop occupancy after failure" + + log_test "Resilient nexthop group replace failure" + + $IP nexthop flush &> /dev/null + ip netns exec testns1 \ + echo 0 > $DEBUGFS_NET_DIR/fib/fail_res_nexthop_group_replace +} + +nexthop_res_mark_buckets_busy() +{ + local group_id=$1; shift + local nhid=$1; shift + local count=$1; shift + local index + + for index in $($IP -j nexthop bucket show id $group_id nhid $nhid | + jq '.[].bucket.index' | head -n ${count:--0}) + do + echo $group_id $index \ + > $DEBUGFS_NET_DIR/fib/nexthop_bucket_activity + done +} + +nexthop_res_num_nhid_buckets() +{ + local group_id=$1; shift + local nhid=$1; shift + + $IP -j nexthop bucket show id $group_id nhid $nhid | jq length +} + +nexthop_res_group_idle_timer_test() +{ + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1/2 type resilient buckets 8 idle_timer 4 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1/2,3 type resilient + + nexthop_bucket_nhid_count_check 10 1 4 2 4 + check_err $? "Group expected to be unbalanced" + + sleep 6 + + nexthop_bucket_nhid_count_check 10 1 2 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after idle timer" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_idle_timer_del_test() +{ + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1,50/2,50/3,1 \ + type resilient buckets 8 idle_timer 6 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1,50/2,150/3,1 type resilient + + nexthop_bucket_nhid_count_check 10 1 4 2 4 3 0 + check_err $? "Group expected to be unbalanced" + + sleep 4 + + # Deletion prompts group replacement. Check that the bucket timers + # are kept. + $IP nexthop delete id 3 + + nexthop_bucket_nhid_count_check 10 1 4 2 4 + check_err $? "Group expected to still be unbalanced" + + sleep 4 + + nexthop_bucket_nhid_count_check 10 1 2 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after idle timer (with delete)" + + $IP nexthop flush &> /dev/null +} + +__nexthop_res_group_increase_timer_test() +{ + local timer=$1; shift + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1/2 type resilient buckets 8 $timer 4 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1/2,3 type resilient + + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "Group expected to be unbalanced" + + sleep 2 + $IP nexthop replace id 10 group 1/2,3 type resilient $timer 8 + sleep 4 + + # 6 seconds, past the original timer. + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "Group still expected to be unbalanced" + + sleep 4 + + # 10 seconds, past the new timer. + nexthop_bucket_nhid_count_check 10 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after $timer increase" + + $IP nexthop flush &> /dev/null +} + +__nexthop_res_group_decrease_timer_test() +{ + local timer=$1; shift + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1/2 type resilient buckets 8 $timer 8 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1/2,3 type resilient + + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "Group expected to be unbalanced" + + sleep 2 + $IP nexthop replace id 10 group 1/2,3 type resilient $timer 4 + sleep 4 + + # 6 seconds, past the new timer, before the old timer. + nexthop_bucket_nhid_count_check 10 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after $timer decrease" + + $IP nexthop flush &> /dev/null +} + +__nexthop_res_group_increase_timer_del_test() +{ + local timer=$1; shift + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1,100/2,100/3,1 \ + type resilient buckets 8 $timer 4 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1,100/2,300/3,1 type resilient + + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "Group expected to be unbalanced" + + sleep 2 + $IP nexthop replace id 10 group 1/2,3 type resilient $timer 8 + sleep 4 + + # 6 seconds, past the original timer. + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "Group still expected to be unbalanced" + + sleep 4 + + # 10 seconds, past the new timer. + nexthop_bucket_nhid_count_check 10 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after $timer increase" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_increase_idle_timer_test() +{ + __nexthop_res_group_increase_timer_test idle_timer +} + +nexthop_res_group_decrease_idle_timer_test() +{ + __nexthop_res_group_decrease_timer_test idle_timer +} + +nexthop_res_group_unbalanced_timer_test() +{ + local i + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1/2 type resilient \ + buckets 8 idle_timer 6 unbalanced_timer 10 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1/2,3 type resilient + + for i in 1 2; do + sleep 4 + nexthop_bucket_nhid_count_check 10 1 4 2 4 + check_err $? "$i: Group expected to be unbalanced" + nexthop_res_mark_buckets_busy 10 1 + done + + # 3 x sleep 4 > unbalanced timer 10 + sleep 4 + nexthop_bucket_nhid_count_check 10 1 2 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after unbalanced timer" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_unbalanced_timer_del_test() +{ + local i + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1,50/2,50/3,1 type resilient \ + buckets 8 idle_timer 6 unbalanced_timer 10 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1,50/2,150/3,1 type resilient + + # Check that NH delete does not reset unbalanced time. + sleep 4 + $IP nexthop delete id 3 + nexthop_bucket_nhid_count_check 10 1 4 2 4 + check_err $? "1: Group expected to be unbalanced" + nexthop_res_mark_buckets_busy 10 1 + + sleep 4 + nexthop_bucket_nhid_count_check 10 1 4 2 4 + check_err $? "2: Group expected to be unbalanced" + nexthop_res_mark_buckets_busy 10 1 + + # 3 x sleep 4 > unbalanced timer 10 + sleep 4 + nexthop_bucket_nhid_count_check 10 1 2 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after unbalanced timer (with delete)" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_no_unbalanced_timer_test() +{ + local i + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1/2 type resilient buckets 8 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1/2,3 type resilient + + for i in $(seq 3); do + sleep 60 + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "$i: Group expected to be unbalanced" + nexthop_res_mark_buckets_busy 10 1 + done + + log_test "Buckets never force-migrated without unbalanced timer" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_short_unbalanced_timer_test() +{ + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1/2 type resilient \ + buckets 8 idle_timer 120 unbalanced_timer 4 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1/2,3 type resilient + + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "Group expected to be unbalanced" + + sleep 5 + + nexthop_bucket_nhid_count_check 10 2 6 + check_err $? "Group expected to be balanced" + + log_test "Bucket migration after unbalanced < idle timer" + + $IP nexthop flush &> /dev/null +} + +nexthop_res_group_increase_unbalanced_timer_test() +{ + __nexthop_res_group_increase_timer_test unbalanced_timer +} + +nexthop_res_group_decrease_unbalanced_timer_test() +{ + __nexthop_res_group_decrease_timer_test unbalanced_timer +} + +nexthop_res_group_force_migrate_busy_test() +{ + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + + RET=0 + + $IP nexthop add id 10 group 1/2 type resilient \ + buckets 8 idle_timer 120 + nexthop_res_mark_buckets_busy 10 1 + $IP nexthop replace id 10 group 1/2,3 type resilient + + nexthop_bucket_nhid_count_check 10 2 6 + check_fail $? "Group expected to be unbalanced" + + $IP nexthop replace id 10 group 2 type resilient + nexthop_bucket_nhid_count_check 10 2 8 + check_err $? "All buckets expected to have migrated" + + log_test "Busy buckets force-migrated when NH removed" + + $IP nexthop flush &> /dev/null +} + nexthop_single_replace_test() { RET=0 @@ -299,6 +811,63 @@ nexthop_single_in_group_replace_err_test() nexthop_resource_set 9999 } +nexthop_single_in_res_group_replace_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 type resilient buckets 4 + + $IP nexthop replace id 1 via 192.0.2.4 dev dummy1 + check_err $? "Failed to replace nexthop when should not" + + nexthop_check "id 10" "id 10 group 1/2 type resilient buckets 4 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_bucket_nhid_count_check 10 1 2 2 2 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 6 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop replace while in resilient group" + + $IP nexthop flush &> /dev/null +} + +nexthop_single_in_res_group_replace_err_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 type resilient buckets 4 + + ip netns exec testns1 \ + echo 1 > $DEBUGFS_NET_DIR/fib/fail_nexthop_bucket_replace + $IP nexthop replace id 1 via 192.0.2.4 dev dummy1 &> /dev/null + check_fail $? "Nexthop replacement succeeded when should fail" + + nexthop_check "id 1" "id 1 via 192.0.2.2 dev dummy1 scope link trap" + check_err $? "Unexpected nexthop entry after failure" + + nexthop_check "id 10" "id 10 group 1/2 type resilient buckets 4 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap" + check_err $? "Unexpected nexthop group entry after failure" + + nexthop_bucket_nhid_count_check 10 1 2 2 2 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 6 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop replace while in resilient group failure" + + $IP nexthop flush &> /dev/null + ip netns exec testns1 \ + echo 0 > $DEBUGFS_NET_DIR/fib/fail_nexthop_bucket_replace +} + nexthop_single_in_group_delete_test() { RET=0 @@ -346,6 +915,57 @@ nexthop_single_in_group_delete_err_test() nexthop_resource_set 9999 } +nexthop_single_in_res_group_delete_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 10 group 1/2 type resilient buckets 4 + + $IP nexthop del id 1 + nexthop_check "id 10" "id 10 group 2 type resilient buckets 4 idle_timer 120 unbalanced_timer 0 unbalanced_time 0 trap" + check_err $? "Unexpected nexthop group entry" + + nexthop_bucket_nhid_count_check 10 2 4 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 5 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop delete while in resilient group" + + $IP nexthop flush &> /dev/null +} + +nexthop_single_in_res_group_delete_err_test() +{ + RET=0 + + $IP nexthop add id 1 via 192.0.2.2 dev dummy1 + $IP nexthop add id 2 via 192.0.2.3 dev dummy1 + $IP nexthop add id 3 via 192.0.2.4 dev dummy1 + $IP nexthop add id 10 group 1/2/3 type resilient buckets 6 + + ip netns exec testns1 \ + echo 1 > $DEBUGFS_NET_DIR/fib/fail_nexthop_bucket_replace + $IP nexthop del id 1 + + # We failed to replace the two nexthop buckets that were originally + # assigned to nhid 1. + nexthop_bucket_nhid_count_check 10 2 2 3 2 + check_err $? "Wrong nexthop buckets count" + + nexthop_resource_check 8 + check_err $? "Wrong nexthop occupancy" + + log_test "Single nexthop delete while in resilient group failure" + + $IP nexthop flush &> /dev/null + ip netns exec testns1 \ + echo 0 > $DEBUGFS_NET_DIR/fib/fail_nexthop_bucket_replace +} + nexthop_replay_test() { RET=0 diff --git a/tools/testing/selftests/drivers/net/netdevsim/psample.sh b/tools/testing/selftests/drivers/net/netdevsim/psample.sh new file mode 100755 index 000000000000..ee10b1a8933c --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/psample.sh @@ -0,0 +1,181 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# This test is for checking the psample module. It makes use of netdevsim +# which periodically generates "sampled" packets. + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS=" + psample_enable_test + psample_group_num_test + psample_md_test +" +NETDEVSIM_PATH=/sys/bus/netdevsim/ +DEV_ADDR=1337 +DEV=netdevsim${DEV_ADDR} +DEVLINK_DEV=netdevsim/${DEV} +SYSFS_NET_DIR=/sys/bus/netdevsim/devices/$DEV/net/ +PSAMPLE_DIR=/sys/kernel/debug/netdevsim/$DEV/psample/ +CAPTURE_FILE=$(mktemp) +NUM_NETIFS=0 +source $lib_dir/lib.sh +source $lib_dir/devlink_lib.sh + +# Available at https://github.com/Mellanox/libpsample +require_command psample + +psample_capture() +{ + rm -f $CAPTURE_FILE + + timeout 2 ip netns exec testns1 psample &> $CAPTURE_FILE +} + +psample_enable_test() +{ + RET=0 + + echo 1 > $PSAMPLE_DIR/enable + check_err $? "Failed to enable sampling when should not" + + echo 1 > $PSAMPLE_DIR/enable 2>/dev/null + check_fail $? "Sampling enablement succeeded when should fail" + + psample_capture + if [ $(cat $CAPTURE_FILE | wc -l) -eq 0 ]; then + check_err 1 "Failed to capture sampled packets" + fi + + echo 0 > $PSAMPLE_DIR/enable + check_err $? "Failed to disable sampling when should not" + + echo 0 > $PSAMPLE_DIR/enable 2>/dev/null + check_fail $? "Sampling disablement succeeded when should fail" + + psample_capture + if [ $(cat $CAPTURE_FILE | wc -l) -ne 0 ]; then + check_err 1 "Captured sampled packets when should not" + fi + + log_test "psample enable / disable" +} + +psample_group_num_test() +{ + RET=0 + + echo 1234 > $PSAMPLE_DIR/group_num + echo 1 > $PSAMPLE_DIR/enable + + psample_capture + grep -q -e "group 1234" $CAPTURE_FILE + check_err $? "Sampled packets reported with wrong group number" + + # New group number should only be used after disable / enable. + echo 4321 > $PSAMPLE_DIR/group_num + + psample_capture + grep -q -e "group 4321" $CAPTURE_FILE + check_fail $? "Group number changed while sampling is active" + + echo 0 > $PSAMPLE_DIR/enable && echo 1 > $PSAMPLE_DIR/enable + + psample_capture + grep -q -e "group 4321" $CAPTURE_FILE + check_err $? "Group number did not change after restarting sampling" + + log_test "psample group number" + + echo 0 > $PSAMPLE_DIR/enable +} + +psample_md_test() +{ + RET=0 + + echo 1 > $PSAMPLE_DIR/enable + + echo 1234 > $PSAMPLE_DIR/in_ifindex + echo 4321 > $PSAMPLE_DIR/out_ifindex + psample_capture + + grep -q -e "in-ifindex 1234" $CAPTURE_FILE + check_err $? "Sampled packets reported with wrong in-ifindex" + + grep -q -e "out-ifindex 4321" $CAPTURE_FILE + check_err $? "Sampled packets reported with wrong out-ifindex" + + echo 5 > $PSAMPLE_DIR/out_tc + psample_capture + + grep -q -e "out-tc 5" $CAPTURE_FILE + check_err $? "Sampled packets reported with wrong out-tc" + + echo $((2**16 - 1)) > $PSAMPLE_DIR/out_tc + psample_capture + + grep -q -e "out-tc " $CAPTURE_FILE + check_fail $? "Sampled packets reported with out-tc when should not" + + echo 1 > $PSAMPLE_DIR/out_tc + echo 10000 > $PSAMPLE_DIR/out_tc_occ_max + psample_capture + + grep -q -e "out-tc-occ " $CAPTURE_FILE + check_err $? "Sampled packets not reported with out-tc-occ when should" + + echo 0 > $PSAMPLE_DIR/out_tc_occ_max + psample_capture + + grep -q -e "out-tc-occ " $CAPTURE_FILE + check_fail $? "Sampled packets reported with out-tc-occ when should not" + + echo 10000 > $PSAMPLE_DIR/latency_max + psample_capture + + grep -q -e "latency " $CAPTURE_FILE + check_err $? "Sampled packets not reported with latency when should" + + echo 0 > $PSAMPLE_DIR/latency_max + psample_capture + + grep -q -e "latency " $CAPTURE_FILE + check_fail $? "Sampled packets reported with latency when should not" + + log_test "psample metadata" + + echo 0 > $PSAMPLE_DIR/enable +} + +setup_prepare() +{ + modprobe netdevsim &> /dev/null + + echo "$DEV_ADDR 1" > ${NETDEVSIM_PATH}/new_device + while [ ! -d $SYSFS_NET_DIR ] ; do :; done + + set -e + + ip netns add testns1 + devlink dev reload $DEVLINK_DEV netns testns1 + + set +e +} + +cleanup() +{ + pre_cleanup + rm -f $CAPTURE_FILE + ip netns del testns1 + echo "$DEV_ADDR" > ${NETDEVSIM_PATH}/del_device + modprobe -r netdevsim &> /dev/null +} + +trap cleanup EXIT + +setup_prepare + +tests_run + +exit $EXIT_STATUS |