diff options
Diffstat (limited to 'tools/testing/selftests/net')
| -rw-r--r-- | tools/testing/selftests/net/Makefile | 2 | ||||
| -rwxr-xr-x | tools/testing/selftests/net/netdevice.sh | 200 | ||||
| -rw-r--r-- | tools/testing/selftests/net/psock_fanout.c | 93 |
3 files changed, 284 insertions, 11 deletions
diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index fbfe5d0d5c2e..35cbb4cba410 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -5,7 +5,7 @@ CFLAGS += -I../../../../usr/include/ reuseport_bpf_numa: LDFLAGS += -lnuma -TEST_PROGS := run_netsocktests run_afpackettests test_bpf.sh +TEST_PROGS := run_netsocktests run_afpackettests test_bpf.sh netdevice.sh TEST_GEN_FILES = socket TEST_GEN_FILES += psock_fanout psock_tpacket TEST_GEN_FILES += reuseport_bpf reuseport_bpf_cpu reuseport_bpf_numa diff --git a/tools/testing/selftests/net/netdevice.sh b/tools/testing/selftests/net/netdevice.sh new file mode 100755 index 000000000000..4e00568d70c2 --- /dev/null +++ b/tools/testing/selftests/net/netdevice.sh @@ -0,0 +1,200 @@ +#!/bin/sh +# +# This test is for checking network interface +# For the moment it tests only ethernet interface (but wifi could be easily added) +# +# We assume that all network driver are loaded +# if not they probably have failed earlier in the boot process and their logged error will be catched by another test +# + +# this function will try to up the interface +# if already up, nothing done +# arg1: network interface name +kci_net_start() +{ + netdev=$1 + + ip link show "$netdev" |grep -q UP + if [ $? -eq 0 ];then + echo "SKIP: $netdev: interface already up" + return 0 + fi + + ip link set "$netdev" up + if [ $? -ne 0 ];then + echo "FAIL: $netdev: Fail to up interface" + return 1 + else + echo "PASS: $netdev: set interface up" + NETDEV_STARTED=1 + fi + return 0 +} + +# this function will try to setup an IP and MAC address on a network interface +# Doing nothing if the interface was already up +# arg1: network interface name +kci_net_setup() +{ + netdev=$1 + + # do nothing if the interface was already up + if [ $NETDEV_STARTED -eq 0 ];then + return 0 + fi + + MACADDR='02:03:04:05:06:07' + ip link set dev $netdev address "$MACADDR" + if [ $? -ne 0 ];then + echo "FAIL: $netdev: Cannot set MAC address" + else + ip link show $netdev |grep -q "$MACADDR" + if [ $? -eq 0 ];then + echo "PASS: $netdev: set MAC address" + else + echo "FAIL: $netdev: Cannot set MAC address" + fi + fi + + #check that the interface did not already have an IP + ip address show "$netdev" |grep '^[[:space:]]*inet' + if [ $? -eq 0 ];then + echo "SKIP: $netdev: already have an IP" + return 0 + fi + + # TODO what ipaddr to set ? DHCP ? + echo "SKIP: $netdev: set IP address" + return 0 +} + +# test an ethtool command +# arg1: return code for not supported (see ethtool code source) +# arg2: summary of the command +# arg3: command to execute +kci_netdev_ethtool_test() +{ + if [ $# -le 2 ];then + echo "SKIP: $netdev: ethtool: invalid number of arguments" + return 1 + fi + $3 >/dev/null + ret=$? + if [ $ret -ne 0 ];then + if [ $ret -eq "$1" ];then + echo "SKIP: $netdev: ethtool $2 not supported" + else + echo "FAIL: $netdev: ethtool $2" + return 1 + fi + else + echo "PASS: $netdev: ethtool $2" + fi + return 0 +} + +# test ethtool commands +# arg1: network interface name +kci_netdev_ethtool() +{ + netdev=$1 + + #check presence of ethtool + ethtool --version 2>/dev/null >/dev/null + if [ $? -ne 0 ];then + echo "SKIP: ethtool not present" + return 1 + fi + + TMP_ETHTOOL_FEATURES="$(mktemp)" + if [ ! -e "$TMP_ETHTOOL_FEATURES" ];then + echo "SKIP: Cannot create a tmp file" + return 1 + fi + + ethtool -k "$netdev" > "$TMP_ETHTOOL_FEATURES" + if [ $? -ne 0 ];then + echo "FAIL: $netdev: ethtool list features" + rm "$TMP_ETHTOOL_FEATURES" + return 1 + fi + echo "PASS: $netdev: ethtool list features" + #TODO for each non fixed features, try to turn them on/off + rm "$TMP_ETHTOOL_FEATURES" + + kci_netdev_ethtool_test 74 'dump' "ethtool -d $netdev" + kci_netdev_ethtool_test 94 'stats' "ethtool -S $netdev" + return 0 +} + +# stop a netdev +# arg1: network interface name +kci_netdev_stop() +{ + netdev=$1 + + if [ $NETDEV_STARTED -eq 0 ];then + echo "SKIP: $netdev: interface kept up" + return 0 + fi + + ip link set "$netdev" down + if [ $? -ne 0 ];then + echo "FAIL: $netdev: stop interface" + return 1 + fi + echo "PASS: $netdev: stop interface" + return 0 +} + +# run all test on a netdev +# arg1: network interface name +kci_test_netdev() +{ + NETDEV_STARTED=0 + IFACE_TO_UPDOWN="$1" + IFACE_TO_TEST="$1" + #check for VLAN interface + MASTER_IFACE="$(echo $1 | cut -d@ -f2)" + if [ ! -z "$MASTER_IFACE" ];then + IFACE_TO_UPDOWN="$MASTER_IFACE" + IFACE_TO_TEST="$(echo $1 | cut -d@ -f1)" + fi + + NETDEV_STARTED=0 + kci_net_start "$IFACE_TO_UPDOWN" + + kci_net_setup "$IFACE_TO_TEST" + + kci_netdev_ethtool "$IFACE_TO_TEST" + + kci_netdev_stop "$IFACE_TO_UPDOWN" + return 0 +} + +#check for needed privileges +if [ "$(id -u)" -ne 0 ];then + echo "SKIP: Need root privileges" + exit 0 +fi + +ip -Version 2>/dev/null >/dev/null +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without the ip tool" + exit 0 +fi + +TMP_LIST_NETDEV="$(mktemp)" +if [ ! -e "$TMP_LIST_NETDEV" ];then + echo "FAIL: Cannot create a tmp file" + exit 1 +fi + +ip link show |grep '^[0-9]' | grep -oE '[[:space:]].*eth[0-9]*:|[[:space:]].*enp[0-9]s[0-9]:' | cut -d\ -f2 | cut -d: -f1> "$TMP_LIST_NETDEV" +while read netdev +do + kci_test_netdev "$netdev" +done < "$TMP_LIST_NETDEV" + +rm "$TMP_LIST_NETDEV" +exit 0 diff --git a/tools/testing/selftests/net/psock_fanout.c b/tools/testing/selftests/net/psock_fanout.c index e62bb354820c..989f917068d1 100644 --- a/tools/testing/selftests/net/psock_fanout.c +++ b/tools/testing/selftests/net/psock_fanout.c @@ -71,7 +71,7 @@ /* Open a socket in a given fanout mode. * @return -1 if mode is bad, a valid socket otherwise */ -static int sock_fanout_open(uint16_t typeflags, int num_packets) +static int sock_fanout_open(uint16_t typeflags, uint16_t group_id) { int fd, val; @@ -81,8 +81,7 @@ static int sock_fanout_open(uint16_t typeflags, int num_packets) exit(1); } - /* fanout group ID is always 0: tests whether old groups are deleted */ - val = ((int) typeflags) << 16; + val = (((int) typeflags) << 16) | group_id; if (setsockopt(fd, SOL_PACKET, PACKET_FANOUT, &val, sizeof(val))) { if (close(fd)) { perror("close packet"); @@ -113,6 +112,20 @@ static void sock_fanout_set_cbpf(int fd) } } +static void sock_fanout_getopts(int fd, uint16_t *typeflags, uint16_t *group_id) +{ + int sockopt; + socklen_t sockopt_len = sizeof(sockopt); + + if (getsockopt(fd, SOL_PACKET, PACKET_FANOUT, + &sockopt, &sockopt_len)) { + perror("failed to getsockopt"); + exit(1); + } + *typeflags = sockopt >> 16; + *group_id = sockopt & 0xfffff; +} + static void sock_fanout_set_ebpf(int fd) { const int len_off = __builtin_offsetof(struct __sk_buff, len); @@ -241,26 +254,26 @@ static void test_control_group(void) fprintf(stderr, "test: control multiple sockets\n"); - fds[0] = sock_fanout_open(PACKET_FANOUT_HASH, 20); + fds[0] = sock_fanout_open(PACKET_FANOUT_HASH, 0); if (fds[0] == -1) { fprintf(stderr, "ERROR: failed to open HASH socket\n"); exit(1); } if (sock_fanout_open(PACKET_FANOUT_HASH | - PACKET_FANOUT_FLAG_DEFRAG, 10) != -1) { + PACKET_FANOUT_FLAG_DEFRAG, 0) != -1) { fprintf(stderr, "ERROR: joined group with wrong flag defrag\n"); exit(1); } if (sock_fanout_open(PACKET_FANOUT_HASH | - PACKET_FANOUT_FLAG_ROLLOVER, 10) != -1) { + PACKET_FANOUT_FLAG_ROLLOVER, 0) != -1) { fprintf(stderr, "ERROR: joined group with wrong flag ro\n"); exit(1); } - if (sock_fanout_open(PACKET_FANOUT_CPU, 10) != -1) { + if (sock_fanout_open(PACKET_FANOUT_CPU, 0) != -1) { fprintf(stderr, "ERROR: joined group with wrong mode\n"); exit(1); } - fds[1] = sock_fanout_open(PACKET_FANOUT_HASH, 20); + fds[1] = sock_fanout_open(PACKET_FANOUT_HASH, 0); if (fds[1] == -1) { fprintf(stderr, "ERROR: failed to join group\n"); exit(1); @@ -271,6 +284,61 @@ static void test_control_group(void) } } +/* Test creating a unique fanout group ids */ +static void test_unique_fanout_group_ids(void) +{ + int fds[3]; + uint16_t typeflags, first_group_id, second_group_id; + + fprintf(stderr, "test: unique ids\n"); + + fds[0] = sock_fanout_open(PACKET_FANOUT_HASH | + PACKET_FANOUT_FLAG_UNIQUEID, 0); + if (fds[0] == -1) { + fprintf(stderr, "ERROR: failed to create a unique id group.\n"); + exit(1); + } + + sock_fanout_getopts(fds[0], &typeflags, &first_group_id); + if (typeflags != PACKET_FANOUT_HASH) { + fprintf(stderr, "ERROR: unexpected typeflags %x\n", typeflags); + exit(1); + } + + if (sock_fanout_open(PACKET_FANOUT_CPU, first_group_id) != -1) { + fprintf(stderr, "ERROR: joined group with wrong type.\n"); + exit(1); + } + + fds[1] = sock_fanout_open(PACKET_FANOUT_HASH, first_group_id); + if (fds[1] == -1) { + fprintf(stderr, + "ERROR: failed to join previously created group.\n"); + exit(1); + } + + fds[2] = sock_fanout_open(PACKET_FANOUT_HASH | + PACKET_FANOUT_FLAG_UNIQUEID, 0); + if (fds[2] == -1) { + fprintf(stderr, + "ERROR: failed to create a second unique id group.\n"); + exit(1); + } + + sock_fanout_getopts(fds[2], &typeflags, &second_group_id); + if (sock_fanout_open(PACKET_FANOUT_HASH | PACKET_FANOUT_FLAG_UNIQUEID, + second_group_id) != -1) { + fprintf(stderr, + "ERROR: specified a group id when requesting unique id\n"); + exit(1); + } + + if (close(fds[0]) || close(fds[1]) || close(fds[2])) { + fprintf(stderr, "ERROR: closing sockets\n"); + exit(1); + } +} + static int test_datapath(uint16_t typeflags, int port_off, const int expect1[], const int expect2[]) { @@ -281,8 +349,8 @@ static int test_datapath(uint16_t typeflags, int port_off, fprintf(stderr, "test: datapath 0x%hx\n", typeflags); - fds[0] = sock_fanout_open(typeflags, 20); - fds[1] = sock_fanout_open(typeflags, 20); + fds[0] = sock_fanout_open(typeflags, 0); + fds[1] = sock_fanout_open(typeflags, 0); if (fds[0] == -1 || fds[1] == -1) { fprintf(stderr, "ERROR: failed open\n"); exit(1); @@ -349,10 +417,12 @@ int main(int argc, char **argv) const int expect_cpu0[2][2] = { { 20, 0 }, { 20, 0 } }; const int expect_cpu1[2][2] = { { 0, 20 }, { 0, 20 } }; const int expect_bpf[2][2] = { { 15, 5 }, { 15, 20 } }; + const int expect_uniqueid[2][2] = { { 20, 20}, { 20, 20 } }; int port_off = 2, tries = 5, ret; test_control_single(); test_control_group(); + test_unique_fanout_group_ids(); /* find a set of ports that do not collide onto the same socket */ ret = test_datapath(PACKET_FANOUT_HASH, port_off, @@ -383,6 +453,9 @@ int main(int argc, char **argv) ret |= test_datapath(PACKET_FANOUT_CPU, port_off, expect_cpu1[0], expect_cpu1[1]); + ret |= test_datapath(PACKET_FANOUT_FLAG_UNIQUEID, port_off, + expect_uniqueid[0], expect_uniqueid[1]); + if (ret) return 1; |