summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-09-23Merge tag 'kvm-s390-master-6.0-2' of ↵Paolo Bonzini
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD More pci fixes Fix for a code analyser warning
2022-09-22KVM: x86: Inject #UD on emulated XSETBV if XSAVES isn't enabledSean Christopherson
Inject #UD when emulating XSETBV if CR4.OSXSAVE is not set. This also covers the "XSAVE not supported" check, as setting CR4.OSXSAVE=1 #GPs if XSAVE is not supported (and userspace gets to keep the pieces if it forces incoherent vCPU state). Add a comment to kvm_emulate_xsetbv() to call out that the CPU checks CR4.OSXSAVE before checking for intercepts. AMD'S APM implies that #UD has priority (says that intercepts are checked before #GP exceptions), while Intel's SDM says nothing about interception priority. However, testing on hardware shows that both AMD and Intel CPUs prioritize the #UD over interception. Fixes: 02d4160fbd76 ("x86: KVM: add xsetbv to the emulator") Cc: stable@vger.kernel.org Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220824033057.3576315-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-09-22KVM: x86: Always enable legacy FP/SSE in allowed user XFEATURESDr. David Alan Gilbert
Allow FP and SSE state to be saved and restored via KVM_{G,SET}_XSAVE on XSAVE-capable hosts even if their bits are not exposed to the guest via XCR0. Failing to allow FP+SSE first showed up as a QEMU live migration failure, where migrating a VM from a pre-XSAVE host, e.g. Nehalem, to an XSAVE host failed due to KVM rejecting KVM_SET_XSAVE. However, the bug also causes problems even when migrating between XSAVE-capable hosts as KVM_GET_SAVE won't set any bits in user_xfeatures if XSAVE isn't exposed to the guest, i.e. KVM will fail to actually migrate FP+SSE. Because KVM_{G,S}ET_XSAVE are designed to allowing migrating between hosts with and without XSAVE, KVM_GET_XSAVE on a non-XSAVE (by way of fpu_copy_guest_fpstate_to_uabi()) always sets the FP+SSE bits in the header so that KVM_SET_XSAVE will work even if the new host supports XSAVE. Fixes: ad856280ddea ("x86/kvm/fpu: Limit guest user_xfeatures to supported bits of XCR0") bz: https://bugzilla.redhat.com/show_bug.cgi?id=2079311 Cc: stable@vger.kernel.org Cc: Leonardo Bras <leobras@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> [sean: add comment, massage changelog] Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220824033057.3576315-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-09-22KVM: x86: Reinstate kvm_vcpu_arch.guest_supported_xcr0Sean Christopherson
Reinstate the per-vCPU guest_supported_xcr0 by partially reverting commit 988896bb6182; the implicit assessment that guest_supported_xcr0 is always the same as guest_fpu.fpstate->user_xfeatures was incorrect. kvm_vcpu_after_set_cpuid() isn't the only place that sets user_xfeatures, as user_xfeatures is set to fpu_user_cfg.default_features when guest_fpu is allocated via fpu_alloc_guest_fpstate() => __fpstate_reset(). guest_supported_xcr0 on the other hand is zero-allocated. If userspace never invokes KVM_SET_CPUID2, supported XCR0 will be '0', whereas the allowed user XFEATURES will be non-zero. Practically speaking, the edge case likely doesn't matter as no sane userspace will live migrate a VM without ever doing KVM_SET_CPUID2. The primary motivation is to prepare for KVM intentionally and explicitly setting bits in user_xfeatures that are not set in guest_supported_xcr0. Because KVM_{G,S}ET_XSAVE can be used to svae/restore FP+SSE state even if the host doesn't support XSAVE, KVM needs to set the FP+SSE bits in user_xfeatures even if they're not allowed in XCR0, e.g. because XCR0 isn't exposed to the guest. At that point, the simplest fix is to track the two things separately (allowed save/restore vs. allowed XCR0). Fixes: 988896bb6182 ("x86/kvm/fpu: Remove kvm_vcpu_arch.guest_supported_xcr0") Cc: stable@vger.kernel.org Cc: Leonardo Bras <leobras@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220824033057.3576315-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-09-22KVM: x86/mmu: add missing update to max_mmu_rmap_sizeMiaohe Lin
The update to statistic max_mmu_rmap_size is unintentionally removed by commit 4293ddb788c1 ("KVM: x86/mmu: Remove redundant spte present check in mmu_set_spte"). Add missing update to it or max_mmu_rmap_size will always be nonsensical 0. Fixes: 4293ddb788c1 ("KVM: x86/mmu: Remove redundant spte present check in mmu_set_spte") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Message-Id: <20220907080657.42898-1-linmiaohe@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-09-22selftests: kvm: Fix a compile error in selftests/kvm/rseq_test.cJinrong Liang
The following warning appears when executing: make -C tools/testing/selftests/kvm rseq_test.c: In function ‘main’: rseq_test.c:237:33: warning: implicit declaration of function ‘gettid’; did you mean ‘getgid’? [-Wimplicit-function-declaration] (void *)(unsigned long)gettid()); ^~~~~~ getgid /usr/bin/ld: /tmp/ccr5mMko.o: in function `main': ../kvm/tools/testing/selftests/kvm/rseq_test.c:237: undefined reference to `gettid' collect2: error: ld returned 1 exit status make: *** [../lib.mk:173: ../kvm/tools/testing/selftests/kvm/rseq_test] Error 1 Use the more compatible syscall(SYS_gettid) instead of gettid() to fix it. More subsequent reuse may cause it to be wrapped in a lib file. Signed-off-by: Jinrong Liang <cloudliang@tencent.com> Message-Id: <20220802071240.84626-1-cloudliang@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-09-22Merge tag 'kvmarm-fixes-6.0-2' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.0, take #2 - Fix kmemleak usage in Protected KVM (again)
2022-09-21KVM: s390: pci: register pci hooks without interpretationMatthew Rosato
The kvm registration hooks must be registered even if the facilities necessary for zPCI interpretation are unavailable, as vfio-pci-zdev will expect to use the hooks regardless. This fixes an issue where vfio-pci-zdev will fail its open function because of a missing kvm_register when running on hardware that does not support zPCI interpretation. Fixes: ca922fecda6c ("KVM: s390: pci: Hook to access KVM lowlevel from VFIO") Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Link: https://lore.kernel.org/r/20220920193025.135655-1-mjrosato@linux.ibm.com Message-Id: <20220920193025.135655-1-mjrosato@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2022-09-21KVM: s390: pci: fix GAIT physical vs virtual pointers usageMatthew Rosato
The GAIT and all of its entries must be represented by physical addresses as this structure is shared with underlying firmware. We can keep a virtual address of the GAIT origin in order to handle processing in the kernel, but when traversing the entries we must again convert the physical AISB stored in that GAIT entry into a virtual address in order to process it. Note: this currently doesn't fix a real bug, since virtual addresses are indentical to physical ones. Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Acked-by: Nico Boehr <nrb@linux.ibm.com> Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Link: https://lore.kernel.org/r/20220907155952.87356-1-mjrosato@linux.ibm.com Message-Id: <20220907155952.87356-1-mjrosato@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2022-09-21KVM: s390: Pass initialized arg even if unusedJanis Schoetterl-Glausch
This silences smatch warnings reported by kbuild bot: arch/s390/kvm/gaccess.c:859 guest_range_to_gpas() error: uninitialized symbol 'prot'. arch/s390/kvm/gaccess.c:1064 access_guest_with_key() error: uninitialized symbol 'prot'. This is because it cannot tell that the value is not used in this case. The trans_exc* only examine prot if code is PGM_PROTECTION. Pass a dummy value for other codes. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Link: https://lore.kernel.org/r/20220825192540.1560559-1-scgl@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2022-09-21KVM: s390: pci: fix plain integer as NULL pointer warningsMatthew Rosato
Fix some sparse warnings that a plain integer 0 is being used instead of NULL. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Link: https://lore.kernel.org/r/20220915175514.167899-1-mjrosato@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2022-09-19KVM: arm64: Use kmemleak_free_part_phys() to unregister hyp_mem_baseZenghui Yu
With commit 0c24e061196c ("mm: kmemleak: add rbtree and store physical address for objects allocated with PA"), kmemleak started to put the objects allocated with physical address onto object_phys_tree_root tree. The kmemleak_free_part() therefore no longer worked as expected on physically allocated objects (hyp_mem_base in this case) as it attempted to search and remove things in object_tree_root tree. Fix it by using kmemleak_free_part_phys() to unregister hyp_mem_base. This fixes an immediate crash when booting a KVM host in protected mode with kmemleak enabled. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220908130659.2021-1-yuzenghui@huawei.com
2022-09-18Linux 6.0-rc6Linus Torvalds
2022-09-18Merge tag 'parisc-for-6.0-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: "Some small parisc architecture fixes for 6.0-rc6: One patch lightens up a previous commit and thus unbreaks building the debian kernel, which tries to configure a 64-bit kernel with the ARCH=parisc environment variable set. The other patches fixes asm/errno.h includes in the tools directory and cleans up memory allocation in the iosapic driver. Summary: - Allow configuring 64-bit kernel with ARCH=parisc - Fix asm/errno.h includes in tools directory for parisc and xtensa - Clean up iosapic memory allocation - Minor typo and spelling fixes" * tag 'parisc-for-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Allow CONFIG_64BIT with ARCH=parisc parisc: remove obsolete manual allocation aligning in iosapic tools/include/uapi: Fix <asm/errno.h> for parisc and xtensa Input: hp_sdc: fix spelling typo in comment parisc: ccio-dma: Add missing iounmap in error path in ccio_probe()
2022-09-18Merge tag 'io_uring-6.0-2022-09-18' of git://git.kernel.dk/linuxLinus Torvalds
Pull io_uring fixes from Jens Axboe: "Nothing really major here, but figured it'd be nicer to just get these flushed out for -rc6 so that the 6.1 branch will have them as well. That'll make our lives easier going forward in terms of development, and avoid trivial conflicts in this area. - Simple trace rename so that the returned opcode name is consistent with the enum definition (Stefan) - Send zc rsrc request vs notification lifetime fix (Pavel)" * tag 'io_uring-6.0-2022-09-18' of git://git.kernel.dk/linux: io_uring/opdef: rename SENDZC_NOTIF to SEND_ZC io_uring/net: fix zc fixed buf lifetime
2022-09-18io_uring/opdef: rename SENDZC_NOTIF to SEND_ZCStefan Metzmacher
It's confusing to see the string SENDZC_NOTIF in ftrace output when using IORING_OP_SEND_ZC. Fixes: b48c312be05e8 ("io_uring/net: simplify zerocopy send user API") Signed-off-by: Stefan Metzmacher <metze@samba.org> Cc: Pavel Begunkov <asml.silence@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: io-uring@vger.kernel.org Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/8e5cd8616919c92b6c3c7b6ea419fdffd5b97f3c.1663363798.git.metze@samba.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-18io_uring/net: fix zc fixed buf lifetimePavel Begunkov
Notifications usually outlive requests, so we need to pin buffers with it by assigning a rsrc to it instead of the request. Fixed: b48c312be05e8 ("io_uring/net: simplify zerocopy send user API") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/dd6406ff8a90887f2b36ed6205dac9fda17c1f35.1663366886.git.asml.silence@gmail.com Reviewed-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-16Merge tag 'gpio-fixes-for-v6.0-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix the level-low interrupt type support in gpio-mpc8xxx - convert another two drivers to using immutable irq chips - MAINTAINERS update * tag 'gpio-fixes-for-v6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: mt7621: Make the irqchip immutable gpio: ixp4xx: Make irqchip immutable MAINTAINERS: Update HiSilicon GPIO Driver maintainer gpio: mpc8xxx: Fix support for IRQ_TYPE_LEVEL_LOW flow_type in mpc85xx
2022-09-16Merge tag 'pinctrl-v6.0-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Nothing special, just driver fixes: - Fix IRQ wakeup and pins for UFS and SDC2 issues on the Qualcomm SC8180x - Fix the Rockchip driver to support interrupt on both rising and falling edges. - Name the Allwinner A100 R_PIO properly - Fix several issues with the Ocelot interrupts" * tag 'pinctrl-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: ocelot: Fix interrupt controller pinctrl: sunxi: Fix name for A100 R_PIO pinctrl: rockchip: Enhance support for IRQ_TYPE_EDGE_BOTH pinctrl: qcom: sc8180x: Fix wrong pin numbers pinctrl: qcom: sc8180x: Fix gpio_wakeirq_map
2022-09-16Merge tag 'block-6.0-2022-09-16' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Two fixes for -rc6: - Fix a mixup of sectors and bytes in the secure erase ioctl (Mikulas) - Fix for a bad return value for a non-blocking bio/blk queue enter call (me)" * tag 'block-6.0-2022-09-16' of git://git.kernel.dk/linux-block: blk-lib: fix blkdev_issue_secure_erase block: blk_queue_enter() / __bio_queue_enter() must return -EAGAIN for nowait
2022-09-16Merge tag 'io_uring-6.0-2022-09-16' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fixes from Jens Axboe: "Two small patches: - Fix using an unsigned type for the return value, introduced in this release (Pavel) - Stable fix for a missing check for a fixed file on put (me)" * tag 'io_uring-6.0-2022-09-16' of git://git.kernel.dk/linux-block: io_uring/msg_ring: check file type before putting io_uring/rw: fix error'ed retry return values
2022-09-16Merge tag 'drm-fixes-2022-09-16' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "This is the regular drm fixes pull. The i915 and misc fixes are fairly regular, but the amdgpu contains fixes for new hw blocks, the dcn314 specific path hookups and also has a bunch of fixes for clang stack size warnings which are a bit churny but fairly straightforward. This means it looks a little larger than usual. amdgpu: - BACO fixes for some RDNA2 boards - PCI AER fixes uncovered by a core PCI change - Properly hook up dirtyfb helper - RAS fixes for GC 11.x - TMR fix - DCN 3.2.x fixes - DCN 3.1.4 fixes - LLVM DML stack size fixes i915: - Revert a display patch around max DP source rate now that the proper WaEdpLinkRateDataReload is in place - Fix perf limit reasons bit position - Fix unclaimmed mmio registers on suspend flow with GuC - A vma_move_to_active fix for a regression with video decoding - DP DSP fix gma500: - Locking and IRQ fixes meson: - OSD1 display fixes panel-edp: - Fix Innolux timings rockchip: - DP/HDMI fixes" * tag 'drm-fixes-2022-09-16' of git://anongit.freedesktop.org/drm/drm: (42 commits) drm/amdgpu: make sure to init common IP before gmc drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega drm/amdgpu: move nbio ih_doorbell_range() into ih code for vega drm/rockchip: Fix return type of cdn_dp_connector_mode_valid drm/amd/display: Mark dml30's UseMinimumDCFCLK() as noinline for stack usage drm/amd/display: Reduce number of arguments of dml31's CalculateFlipSchedule() drm/amd/display: Reduce number of arguments of dml31's CalculateWatermarksAndDRAMSpeedChangeSupport() drm/amd/display: Reduce number of arguments of dml32_CalculatePrefetchSchedule() drm/amd/display: Reduce number of arguments of dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport() drm/amd/display: Refactor SubVP calculation to remove FPU drm/amd/display: Limit user regamma to a valid value drm/amd/display: add workaround for subvp cursor corruption for DCN32/321 drm/amd/display: SW cursor fallback for SubVP drm/amd/display: Round cursor width up for MALL allocation drm/amd/display: Correct dram channel width for dcn314 drm/amd/display: Relax swizzle checks for video non-RGB formats on DCN314 drm/amd/display: Hook up DCN314 specific dml implementation drm/amd/display: Enable dlg and vba compilation for dcn314 drm/amd/display: Fix compilation errors on DCN314 drm/amd/display: Fix divide by zero in DML ...
2022-09-16Merge tag '6.0-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: "Four smb3 fixes for stable: - important fix to revalidate mapping when doing direct writes - missing spinlock - two fixes to socket handling - trivial change to update internal version number for cifs.ko" * tag '6.0-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module number cifs: add missing spinlock around tcon refcount cifs: always initialize struct msghdr smb_msg completely cifs: don't send down the destination address to sendmsg for a SOCK_STREAM cifs: revalidate mapping when doing direct writes
2022-09-16Merge tag 'drm-intel-fixes-2022-09-15' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Revert a display patch around max DP source rate now that the proper WaEdpLinkRateDataReload is in place. (Ville) - Fix perf limit reasons bit position. (Ashutosh) - Fix unclaimmed mmio registers on suspend flow with GuC. (Umesh) - A vma_move_to_active fix for a regression with video decoding. (Nirmoy) - DP DSP fix. (Ankit) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YyMtmGMXRLsURoM5@intel.com
2022-09-16Merge tag 'drm-misc-fixes-2022-09-15' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull: * gma500: Locking and IRQ fixes * meson: OSD1 display fixes * panel-edp: Fix Innolux timings * rockchip: DP/HDMI fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/YyMUpP1w21CPXq+I@linux-uq9g
2022-09-16Merge tag 'amd-drm-fixes-6.0-2022-09-14' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.0-2022-09-14: amdgpu: - BACO fixes for some RDNA2 boards - PCI AER fixes uncovered by a core PCI change - Properly hook up dirtyfb helper - RAS fixes for GC 11.x - TMR fix - DCN 3.2.x fixes - DCN 3.1.4 fixes - LLVM DML stack size fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220914184030.6145-1-alexander.deucher@amd.com
2022-09-15io_uring/msg_ring: check file type before puttingJens Axboe
If we're invoked with a fixed file, follow the normal rules of not calling io_fput_file(). Fixed files are permanently registered to the ring, and do not need putting separately. Cc: stable@vger.kernel.org Fixes: aa184e8671f0 ("io_uring: don't attempt to IOPOLL for MSG_RING requests") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-15blk-lib: fix blkdev_issue_secure_eraseMikulas Patocka
There's a bug in blkdev_issue_secure_erase. The statement "unsigned int len = min_t(sector_t, nr_sects, max_sectors);" sets the variable "len" to the length in sectors, but the statement "bio->bi_iter.bi_size = len" treats it as if it were in bytes. The statements "sector += len << SECTOR_SHIFT" and "nr_sects -= len << SECTOR_SHIFT" are thinko. This patch fixes it. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # v5.19 Fixes: 44abff2c0b97 ("block: decouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD") Link: https://lore.kernel.org/r/alpine.LRH.2.02.2209141549480.28100@file01.intranet.prod.int.rdu2.redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-15parisc: Allow CONFIG_64BIT with ARCH=pariscHelge Deller
The previous patch triggered a build failure for the debian kernel, which has CONFIG_64BIT enabled, uses the CROSS_COMPILER environment variable and uses ARCH=parisc to configure the kernel for 64-bit support. This patch weakens the previous patch while keeping the recommended way to configure the kernel with: ARCH=parisc -> build 32-bit kernel ARCH=parisc64 -> build 64-bit kernel while adding the possibility for debian to configure a 64-bit kernel even if ARCH=parisc is set (PA8X00 CPU has to be selected and CONFIG_64BIT needs to be enabled). The downside of this patch is, that we now have a small window open again where people may get it wrong: if they enable CONFIG_64BIT and try to compile with a 32-bit compiler. Fixes: 3dcfb729b5f4 ("parisc: Make CONFIG_64BIT available for ARCH=parisc64 only") Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # 5.15+
2022-09-15parisc: remove obsolete manual allocation aligning in iosapicRolf Eike Beer
kmalloc() returns memory with __assume_kmalloc_alignment, which is __alignof__(unsigned long long) for parisc. Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Helge Deller <deller@gmx.de>
2022-09-14drm/amdgpu: make sure to init common IP before gmcAlex Deucher
Move common IP init before GMC init so that HDP gets remapped before GMC init which uses it. This fixes the Unsupported Request error reported through AER during driver load. The error happens as a write happens to the remap offset before real remapping is done. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-09-14drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vegaAlex Deucher
This mirrors what we do for other asics and this way we are sure the sdma doorbell range is properly initialized. There is a comment about the way doorbells on gfx9 work that requires that they are initialized for other IPs before GFX is initialized. However, the statement says that it applies to multimedia as well, but the VCN code currently initializes doorbells after GFX and there are no known issues there. In my testing at least I don't see any problems on SDMA. This is a prerequisite for fixing the Unsupported Request error reported through AER during driver load. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-09-14drm/amdgpu: move nbio ih_doorbell_range() into ih code for vegaAlex Deucher
This mirrors what we do for other asics and this way we are sure the ih doorbell range is properly initialized. There is a comment about the way doorbells on gfx9 work that requires that they are initialized for other IPs before GFX is initialized. In this case IH is initialized before GFX, so there should be no issue. This is a prerequisite for fixing the Unsupported Request error reported through AER during driver load. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-09-14pinctrl: ocelot: Fix interrupt controllerHoratiu Vultur
When an external device generated a level based interrupt then the interrupt controller could miss the interrupt. The reason is that the interrupt controller can detect only link changes. In the following example, if there is a PHY that generates an interrupt then the following would happen. The GPIO detected that the interrupt line changed, and then the 'ocelot_irq_handler' was called. Here it detects which GPIO line saw the change and for that will call the following: 1. irq_mask 2. phy interrupt routine 3. irq_eoi 4. irq_unmask And this works fine for simple cases, but if the PHY generates many interrupts, for example when doing PTP timestamping, then the following could happen. Again the function 'ocelot_irq_handler' will be called and then from here the following could happen: 1. irq_mask 2. phy interrupt routine 3. irq_eoi 4. irq_unmask Right before step 3(irq_eoi), the PHY will generate another interrupt. Now the interrupt controller will acknowledge the change in the interrupt line. So we miss the interrupt. A solution will be to use 'handle_level_irq' instead of 'handle_fasteoi_irq', because for this will change routine order of handling the interrupt. 1. irq_mask 2. irq_ack 3. phy interrupt routine 4. irq_unmask And now if the PHY will generate a new interrupt before irq_unmask, the interrupt controller will detect this because it already acknowledge the change in interrupt line at step 2(irq_ack). But this is not the full solution because there is another issue. In case there are 2 PHYs that share the interrupt line. For example phy1 generates an interrupt, then the following can happen: 1.irq_mask 2.irq_ack 3.phy0 interrupt routine 4.phy1 interrupt routine 5.irq_unmask In case phy0 will generate an interrupt while clearing the interrupt source in phy1, then the interrupt line will be kept down by phy0. So the interrupt controller will not see any changes in the interrupt line. The solution here is to update 'irq_unmask' such that it can detect if the interrupt line is still active or not. And if it is active then call again the procedure to clear the interrupts. But we don't want to do it every time, only if we know that the interrupt controller has not seen already that the interrupt line has changed. While at this, add support also for IRQ_TYPE_LEVEL_LOW. Fixes: be36abb71d878f ("pinctrl: ocelot: add support for interrupt controller") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220909145942.844102-1-horatiu.vultur@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-09-14gpio: mt7621: Make the irqchip immutableSergio Paracuellos
Commit 6c846d026d49 ("gpio: Don't fiddle with irqchips marked as immutable") added a warning to indicate if the gpiolib is altering the internals of irqchips. Following this change the following warnings are now observed for the mt7621 driver: gpio gpiochip0: (1e000600.gpio-bank0): not an immutable chip, please consider fixing it! gpio gpiochip1: (1e000600.gpio-bank1): not an immutable chip, please consider fixing it! gpio gpiochip2: (1e000600.gpio-bank2): not an immutable chip, please consider fixing it! Fix this by making the irqchip in the mt7621 driver immutable. Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-14Merge tag 'devicetree-fixes-for-6.0-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Update some stale binding maintainer emails - Fix property name error in apple,aic binding - Add missing param to of_dma_configure_id() stub - Fix an off-by-one error in unflatten_dt_nodes() * tag 'devicetree-fixes-for-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: pinctrl: qcom: drop non-working codeaurora.org emails dt-bindings: power: qcom,rpmpd: drop non-working codeaurora.org emails dt-bindings: apple,aic: Fix required item "apple,fiq-index" in affinity description dt-bindings: interconnect: fsl,imx8m-noc: drop Leonard Crestez of/device: Fix up of_dma_configure_id() stub MAINTAINERS: Update email of Neil Armstrong of: fdt: fix off-by-one error in unflatten_dt_nodes()
2022-09-14cifs: update internal module numberSteve French
To 2.39 Signed-off-by: Steve French <stfrench@microsoft.com>
2022-09-14cifs: add missing spinlock around tcon refcountPaulo Alcantara
Add missing spinlock to protect updates on tcon refcount in cifs_put_tcon(). Fixes: d7d7a66aacd6 ("cifs: avoid use of global locks for high contention data") Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-09-14drm/rockchip: Fix return type of cdn_dp_connector_mode_validNathan Huckleberry
The mode_valid field in drm_connector_helper_funcs is expected to be of type: enum drm_mode_status (* mode_valid) (struct drm_connector *connector, struct drm_display_mode *mode); The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of cdn_dp_connector_mode_valid should be changed from int to enum drm_mode_status. Reported-by: Dan Carpenter <error27@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1703 Cc: llvm@lists.linux.dev Signed-off-by: Nathan Huckleberry <nhuck@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220913205555.155149-1-nhuck@google.com
2022-09-13cifs: always initialize struct msghdr smb_msg completelyStefan Metzmacher
So far we were just lucky because the uninitialized members of struct msghdr are not used by default on a SOCK_STREAM tcp socket. But as new things like msg_ubuf and sg_from_iter where added recently, we should play on the safe side and avoid potention problems in future. Signed-off-by: Stefan Metzmacher <metze@samba.org> Cc: stable@vger.kernel.org Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-09-13cifs: don't send down the destination address to sendmsg for a SOCK_STREAMStefan Metzmacher
This is ignored anyway by the tcp layer. Signed-off-by: Stefan Metzmacher <metze@samba.org> Cc: stable@vger.kernel.org Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-09-13block: blk_queue_enter() / __bio_queue_enter() must return -EAGAIN for nowaitStefan Roesch
Today blk_queue_enter() and __bio_queue_enter() return -EBUSY for the nowait code path. This is not correct: they should return -EAGAIN instead. This problem was detected by fio. The following command exposed the above problem: t/io_uring -p0 -d128 -b4096 -s32 -c32 -F1 -B0 -R0 -X1 -n24 -P1 -u1 -O0 /dev/ng0n1 By applying the patch, the retry case is handled correctly in the slow path. Signed-off-by: Stefan Roesch <shr@fb.com> Fixes: bfd343aa1718 ("blk-mq: don't wait in blk_mq_queue_enter() if __GFP_WAIT isn't set") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-13drm/amd/display: Mark dml30's UseMinimumDCFCLK() as noinline for stack usageNathan Chancellor
This function consumes a lot of stack space and it blows up the size of dml30_ModeSupportAndSystemConfigurationFull() with clang: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn30/display_mode_vba_30.c:3542:6: error: stack frame size (2200) exceeds limit (2048) in 'dml30_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Commit a0f7e7f759cf ("drm/amd/display: fix i386 frame size warning") aimed to address this for i386 but it did not help x86_64. To reduce the amount of stack space that dml30_ModeSupportAndSystemConfigurationFull() uses, mark UseMinimumDCFCLK() as noinline, using the _for_stack variant for documentation. While this will increase the total amount of stack usage between the two functions (1632 and 1304 bytes respectively), it will make sure both stay below the limit of 2048 bytes for these files. The aforementioned change does help reduce UseMinimumDCFCLK()'s stack usage so it should not be reverted in favor of this change. Link: https://github.com/ClangBuiltLinux/linux/issues/1681 Reported-by: "Sudip Mukherjee (Codethink)" <sudipm.mukherjee@gmail.com> Tested-by: Maíra Canal <mairacanal@riseup.net> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-13drm/amd/display: Reduce number of arguments of dml31's CalculateFlipSchedule()Nathan Chancellor
Most of the arguments are identical between the two call sites and they can be accessed through the 'struct vba_vars_st' pointer. This reduces the total amount of stack space that dml31_ModeSupportAndSystemConfigurationFull() uses by 112 bytes with LLVM 16 (1976 -> 1864), helping clear up the following clang warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c:3908:6: error: stack frame size (2216) exceeds limit (2048) in 'dml31_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml31_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Link: https://github.com/ClangBuiltLinux/linux/issues/1681 Reported-by: "Sudip Mukherjee (Codethink)" <sudipm.mukherjee@gmail.com> Tested-by: Maíra Canal <mairacanal@riseup.net> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-13drm/amd/display: Reduce number of arguments of dml31's ↵Nathan Chancellor
CalculateWatermarksAndDRAMSpeedChangeSupport() Most of the arguments are identical between the two call sites and they can be accessed through the 'struct vba_vars_st' pointer. This reduces the total amount of stack space that dml31_ModeSupportAndSystemConfigurationFull() uses by 240 bytes with LLVM 16 (2216 -> 1976), helping clear up the following clang warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c:3908:6: error: stack frame size (2216) exceeds limit (2048) in 'dml31_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml31_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Link: https://github.com/ClangBuiltLinux/linux/issues/1681 Reported-by: "Sudip Mukherjee (Codethink)" <sudipm.mukherjee@gmail.com> Tested-by: Maíra Canal <mairacanal@riseup.net> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-13drm/amd/display: Reduce number of arguments of dml32_CalculatePrefetchSchedule()Nathan Chancellor
Several of the arguments are identical between the two call sites and they can be accessed through the 'struct vba_vars_st' pointer. This reduces the total amount of stack space that dml32_ModeSupportAndSystemConfigurationFull() uses by 208 bytes with LLVM 16 (1936 -> 1728), helping clear up the following clang warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:1721:6: error: stack frame size (2152) exceeds limit (2048) in 'dml32_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Additionally, while modifying the arguments to dml32_CalculatePrefetchSchedule(), use 'v' consistently, instead of 'v' mixed with 'mode_lib->vba'. Link: https://github.com/ClangBuiltLinux/linux/issues/1681 Reported-by: "Sudip Mukherjee (Codethink)" <sudipm.mukherjee@gmail.com> Tested-by: Maíra Canal <mairacanal@riseup.net> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-13drm/amd/display: Reduce number of arguments of ↵Nathan Chancellor
dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport() Most of the arguments are identical between the two call sites and they can be accessed through the 'struct vba_vars_st' pointer created at the top of dml32_ModeSupportAndSystemConfigurationFull(). This reduces the total amount of stack space that dml32_ModeSupportAndSystemConfigurationFull() uses by 216 bytes with LLVM 16 (2152 -> 1936), helping clear up the following clang warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:1721:6: error: stack frame size (2152) exceeds limit (2048) in 'dml32_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Additionally, while modifying the arguments to dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport(), use 'v' consistently, instead of 'v' mixed with 'mode_lib->vba'. Link: https://github.com/ClangBuiltLinux/linux/issues/1681 Reported-by: "Sudip Mukherjee (Codethink)" <sudipm.mukherjee@gmail.com> Tested-by: Maíra Canal <mairacanal@riseup.net> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-13drm/amd/display: Refactor SubVP calculation to remove FPUAlvin Lee
Refactor calculation to remove floating point operations from dmub_srv. To ensure that 32-bit compilation works well, we use the div64 family of macros to do integer division for SubVP-related timing parameters. Cc: Maíra Canal <mairacanal@riseup.net> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Isabella Basso <isabbasso@riseup.net> Cc: Magali Lemes <magalilemes00@gmail.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Samson Tam <Samson.Tam@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Co-developed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-13drm/amd/display: Limit user regamma to a valid valueYao Wang1
[Why] For HDR mode, we get total 512 tf_point and after switching to SDR mode we actually get 400 tf_point and the rest of points(401~512) still use dirty value from HDR mode. We should limit the rest of the points to max value. [How] Limit the value when coordinates_x.x > 1, just like what we do in translate_from_linear_space for other re-gamma build paths. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Yao Wang1 <Yao.Wang1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-13drm/amd/display: add workaround for subvp cursor corruption for DCN32/321Aurabindo Pillai
[Why&How] Kernel does not have a means to tell the userspace to use software cursor. Due to lack of this functionality, reducing the max cursor size is the only way to ensure that power savings of Subview port feature is utilized for asics that support it. The workaround could be removed after cursor caching is fixed while a subviewport config is active. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit (git 2.34.1) at 2025-06-02 18:48:21 +0000