summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-06-02iwlwifi: mvm: flush per station for DQA modeSara Sharon
Avoid using the global flush and move to flush per station whenever possible in DQA mode. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-06-01rsi: use subdirectory for firmware fileamit karwar
linux-firmware maintainers prefer to have a subdirectory for firmware files. Code is changed here to pick firmware file from a subdirectory. Firmware file with a new loading mechanism will be submitted inside rsi directory. Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-01mwifiex: uap: process remain on channel expired eventXinming Hu
AP interface need process remain-on-channel firmware event and notify cfg80211, this will be used in the listen-stage of p2p find procedure. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-01mwifiex: simplify the code around ra_listShawn Lin
We don't need to check if the list is empty separately as we could use list_first_entry_or_null to cover it. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-01qtnfmac: remove duplicated assignment to macColin Ian King
mac is being assigned twice, remove redundant 2nd assignment. Detected by CoverityScan, CID#1437554 ("Incorrect expression") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-31mwifiex: check next packet length for usb tx aggregationXinming Hu
The next packet length will be used by interface driver, to check if the next packet still could be aggregated. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-31mwifiex: usb: add timer to flush aggregation packetsXinming Hu
Aggregation will wait for next packet until limit aggr size/number reach. Packet might be drop and also packet dequeue will be stop in some cases. This patch add timer to flush packets in aggregation list to avoid long time waiting. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-31mwifiex: usb: transmit aggregation packetsXinming Hu
Instead of using 4KB packet buffer for data transfer, new chipset have more device memory. This patch try to aggregation packets in an 16KB buffer. In this way, totally usb transaction cost will be reduced. Thoughput test on usb 2.0 show both TCP TX and UPD TX promote ~40M, from ~240M to ~280M. This feature is default disabled, and can be enabled by module parameter, like: insmod mwifiex.ko aggr_ctrl=1 Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-31mwifiex: usb: kill urb before free its memoryXinming Hu
we have observed host system hang when device firmware crash, stack trace show it was an use-after-free case: previous submitted urb will be holding in usbcore, and given back to device driver when device disconnected, while the urb have been freed in usb device disconnect handler. This patch kill the holding urb before free its memory. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-31mwifiex: use variable interface header lengthXinming Hu
Usb tx aggregation feature will utilize 4-bytes bus interface header, otherwise it will be set to zero in default case. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24qtnfmac: introduce new FullMAC driver for Quantenna chipsetsIgor Mitsyanko
This patch adds support for new FullMAC WiFi driver for Quantenna QSR10G chipsets. QSR10G (aka Pearl) is Quantenna's 8x8, 160M, 11ac offering. QSR10G supports 2 simultaneous WMACs - one 5G and one 2G. 5G WMAC supports 160M, 8x8 configuration. FW supports up to 8 concurrent virtual interfaces on each WMAC. Patch introduces 2 new drivers: - qtnfmac.ko for interfacing with kernel wireless core - qtnfmac_pearl_pcie.ko for interfacing with hardware over PCIe interface Signed-off-by: Dmitrii Lebed <dlebed@quantenna.com> Signed-off-by: Sergei Maksimenko <smaksimenko@quantenna.com> Signed-off-by: Sergey Matyukevich <smatyukevich@quantenna.com> Signed-off-by: Bindu Therthala <btherthala@quantenna.com> Signed-off-by: Huizhao Wang <hwang@quantenna.com> Signed-off-by: Kamlesh Rath <krath@quantenna.com> Signed-off-by: Avinash Patil <avinashp@quantenna.com> Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rtlwifi: btcoex: 23b 1ant: initialize bt_disabled to falseDan Carpenter
We only want to disable this if bt_disable_cnt is >= 2. Fixes: f66509e3d7c2 ("rtlwifi: btcoex: Remove 23b 1ant configuration parameter") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rtlwifi: btcoex: 23b 1ant: turn off ps and tdma mechanism when concurrent modeYan-Hsuan Chuang
When wifi is under concurrent mode, we can not distinguish if it is the real PS or just a fake one by sending null data, so we turn it off in case of miracast scenario. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rtlwifi: btcoex: 23b 1ant: fine tune for bt_sco_hid busyPing-Ke Shih
Fine tune the parameters in case of act_bt_sco_hid_only_busy. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rtlwifi: btcoex: 23b 1ant: fine tune for wifi not connectedPing-Ke Shih
Fine tune the parameters in cases of scan, assoc and auth when wifi isn't connected. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rtlwifi: btcoex: 23b 1ant: fine tune for wifi connectedPing-Ke Shih
Fine tune the parameters in cases of bt_acl_busy and scan when wifi is connected. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rtlwifi: btcoex: 23b 1ant: coex table fine tunePing-Ke Shih
Set register settings for coex table fine tune. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rtlwifi: btcoex: 23b 1ant: Add coex_table_type to logPing-Ke Shih
Display coex_table_type in log. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rtlwifi: btcoex: 23b 1ant: remove verbose log from periodic functionPing-Ke Shih
Simplify the debug trace log. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rtlwifi: btcoex: 23b 1ant: check more cases when bt is queingPing-Ke Shih
If bt is queing, we need to set the packet priority properly. Originally we only consider if wifi was connected or not, but now we also consider if bt is under abnormal scan or wifi is scanning, roaming or linking, and set the coex table. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rtlwifi: btcoex: 23b 1ant: define wifi in high priority task.Ping-Ke Shih
Add the definition of wifi in high priority task for bt inquiry. According to driver's notifications, btc will knows whether wifi is in high priority tasks or not. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rtlwifi: btcoex: 23b 1ant: Special packets statistic in notificationPing-Ke Shih
Count and log special packets of DHCP, EAPOL and ARP, and check whether the interface is in 4-way handshake. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rtlwifi: btcoex: 23b 1ant: Revise media status notify to fix no scan result ↵Ping-Ke Shih
issue Force antenna setup for no scan result issue Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rtlwifi: btcoex: 23b 1ant: fine tune connect notifyPing-Ke Shih
When association starts, force antenna setup for no scan result issue. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rtlwifi: btcoex: 23b 1ant: Add rf status notificationPing-Ke Shih
If driver announce wifi RF status is off, btc can switch antenna to BT. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rtlwifi: btcoex: 23b 1ant: Setup register for BT WHCK testPing-Ke Shih
If BT is under WHCK, we enter a special mode. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rtlwifi: btcoex: 23b 1ant: parse more BT information from C2HPing-Ke Shih
BT FW provide more BT status as clues, thus we also display them in coex log to help debug in field. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rtlwifi: btcoex: 23b 1ant: Add power_on_settingPing-Ke Shih
This change is highly related to init_hwconfig that was decomposed into two parts for better program flow. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rtlwifi: btcoex: 23b 1ant: add wifi_only argument to init_hwconfigPing-Ke Shih
In case of wifi_only, we can simply switch antenna to wifi. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rtlwifi: btcoex: 23b 1ant: adjust wifi duration for bt a2dpPing-Ke Shih
The larger the bt a2dp bit pool is, the more time bt needs to receive them. If we do not adjust the wifi duration, the voice quality will be low. Hence we reduce the time that wifi holds, to improve the a2dp service. If the bt is slave, it may receive a packet at any time, so we need to mark them as high priority packets in case of packet loss Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rtlwifi: btcoex: 23b 1ant: need these information when scanPing-Ke Shih
Log the scan procedure, and update ap_num for future usage when scan done. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rtlwifi: btcoex: 23b 1ant: Switch antenna to wifi or BT.Ping-Ke Shih
Since wifi and BT share the same physical antenna, we should switch antenna to fit every situation. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rt2x00: Add device ID for Epson WN7512BEPTom Gaudasinski
Make Epson WN7512BEP work by adding its device-id to rt2800usb. Device contains a Ralink RT3071L, registers as vendor Accton/Arcadyan. Signed-off-by: Tom Gaudasinski <tomg@records.headdesk.com.au> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24ssb: Delete an error message for a failed memory allocation in ↵Markus Elfring
ssb_devices_register() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Michael Büsch <m@bues.ch> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rt2x00: convert rt2x00_desc_read return typeArnd Bergmann
This is a semi-automated conversion to change rt2x00_desc_read to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(\<rt2x00_desc_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:\(\<_rt2x00_desc_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ drivers/net/wireless/ralink/rt2x00/rt* Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rt2x00: convert rt2800_eeprom_read return typeArnd Bergmann
This is a semi-automated conversion to change rt2800_eeprom_read to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(\<rt2800_eeprom_read\(_from_array\|\)\>(.*, .*\), &\(.*\));:\3 = \1);:' drivers/net/wireless/ralink/rt2x00/rt2800lib.c Some manual tweaking was required here to work around the line wraps. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rt2x00: convert rt2x00_eeprom_read return typeArnd Bergmann
This is a semi-automated conversion to change rt2x00_eeprom_read() to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(\<rt2x00_eeprom_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:= _\(rt2x00_eeprom_read\):= \1:' drivers/net/wireless/ralink/rt2x00/* Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rt2x00: convert rt2*_bbp_read return typeArnd Bergmann
This is a semi-automated conversion to change *_bbp_read() to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(\<rt.*_bbp_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:\(\<rt.*_bbp_dcoc_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:= _\(rt.*_bbp_read\):\1:' drivers/net/wireless/ralink/rt2x00/* Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rt2x00: convert rt2800_register_read return typeArnd Bergmann
This is a semi-automated conversion to change rt2800_register_read to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(rt2800_register_read(.*, .*\), &\(.*\));:\2 = \1);:' \ 's:\(rt2800_register_read_lock(.*, .*\), &\(.*\));:\2 = \1);:' \ drivers/net/wireless/ralink/rt2x00/rt2800lib.c The function itself was modified manually along with the one remaining multi-line caller that was not covered automatically and the indirect reference. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rt2x00: convert rt2x00usb_register_read return typeArnd Bergmann
This is a semi-automated conversion to change rt2x00usb_register_read to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(\<rt2x00usb_register_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:\(\<rt2500usb_register_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:\(\<rt2500usb_register_read_lock\>(.*, .*\), &\(.*\));:\2 = \1);:' \ drivers/net/wireless/ralink/rt2x00/* Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rt2x00: convert rt2x00mmio_register_read return typeArnd Bergmann
This is a semi-automated conversion to change rt2x00mmio_register_read to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(rt2x00mmio_register_read(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:_rt2x00mmio_register_read:rt2x00mmio_register_read:' \ drivers/net/wireless/ralink/rt2x00/*.c The function itself was modified manually along with the one remaining caller that was not covered automatically. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rt2x00: convert rt2x00_rf_read return typeArnd Bergmann
This is a semi-automated conversion to change rt2x00_rf_read() to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(\<rt2x00_rf_read\>(.*, .*\), &\(.*\));:\2 = \1);:' \ drivers/net/wireless/ralink/rt2x00/rt* Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rt2x00: convert rt2800_rfcsr_read return typeArnd Bergmann
With CONFIG_KASAN enabled and gcc-7, we get a warning about rather high stack usage (with a private patch set I have to turn on this warning, which I intend to get into the next kernel release): wireless/ralink/rt2x00/rt2800lib.c: In function 'rt2800_bw_filter_calibration': wireless/ralink/rt2x00/rt2800lib.c:7990:1: error: the frame size of 2144 bytes is larger than 1536 bytes [-Werror=frame-larger-than=] The problem is that KASAN inserts a redzone around each local variable that gets passed by reference, and the newly added function has a lot of them. This is a semi-automated conversion to change rt2800_rfcsr_read to return the register contents instead of passing them by value, resulting in much better object code. The majority of the patch was done using: sed -i 's:\(rt2800_rfcsr_read(.*, .*\), &\(.*\));:\2 = \1);:' \ -i 's:\(rt2800_rfcsr_read_bank(.*, .*\), &\(.*\));:\2 = \1);:' \ drivers/net/wireless/ralink/rt2x00/rt2800lib.c Fixes: 41977e86c984 ("rt2x00: add support for MT7620") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rt2x00: change function pointers for register accessorsArnd Bergmann
This prepares the driver for changing all the 'read' register accessors to return the value instead of passing it by reference. Since a lot of them are used in callbacks, this takes care of the callbacks first, adding a couple of helpers that will be removed again one at a time. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24libertas: Remove function entry/exit debuggingKees Cook
In at least one place, the enter/exit debugging was not being correctly matched. Based on mailing list feedback, it was desired to drop all of these in favor of using ftrace instead. Suggested-by: Joe Perches <joe@perches.com> Suggested-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24libertas: Avoid reading past end of bufferKees Cook
Using memcpy() from a string that is shorter than the length copied means the destination buffer is being filled with arbitrary data from the kernel rodata segment. Instead, redefine the stat strings to be ETH_GSTRING_LEN sizes, like other drivers. This lets us use a single memcpy that does not leak rodata contents. Additionally adjust indentation to keep checkpatch.pl happy. This was found with the future CONFIG_FORTIFY_SOURCE feature. Cc: Daniel Micay <danielmicay@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24iwlegacy: warn when enabling power saveStanislaw Gruszka
iwlegacy firmware can crash when power save is configured. PS was allowed in "dbdac2b iwlegacy: properly enable power saving" with belive that user who enable PS is aware of that and can relate firmware crahes with PS. However some distributions seems to enable PS without user intervention, so warn about that. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24wlcore: fix 64K page supportArnd Bergmann
In the stable linux-3.16 branch, I ran into a warning in the wlcore driver: drivers/net/wireless/ti/wlcore/spi.c: In function 'wl12xx_spi_raw_write': drivers/net/wireless/ti/wlcore/spi.c:315:1: error: the frame size of 12848 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] Newer kernels no longer show the warning, but the bug is still there, as the allocation is based on the CPU page size rather than the actual capabilities of the hardware. This replaces the PAGE_SIZE macro with the SZ_4K macro, i.e. 4096 bytes per buffer. Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rsi: rsi_91x_core: Use time_after time comparisonKarim Eshapa
Use time_after kernel macro for time comparison. Signed-off-by: Karim Eshapa <karim.eshapa@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rsi: Remove old firmware loading methodPrameela Rani Garnepudi
The older firmware loading method is not usable by any Redpine chipset. Hence removing that part of the code. Older firmware image with rsi_91x.fw name is deprecated Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2025-04-28 06:16:26 +0000