| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
Fixed-regulator nowadays has preferred node-naming scheme set in the
binding. This gets all boards on the same state for Rockchip arm32-dts.
* tag 'v6.13-rockchip-dts32-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: adapt regulator nodenames to preferred form
ARM: dts: rockchip: Add Relfor Saib board
dt-bindings: arm: rockchip: Add Relfor Saib board
dt-bindings: vendor-prefixes: Add Relfor labs
ARM: dts: rockchip: Add watchdog node for RV1126
dt-bindings: watchdog: rockchip: Add rockchip,rv1126-wdt string
Link: https://lore.kernel.org/r/6740039.4vTCxPXJkl@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner Device Tree changes for 6.13 part 2
- Remove accidental suniv duplicates in Makefile
- Add second source magnetometer for Pine Phone
- Add orientation (mount matrix) for Pine Phone's accelerometer and
magnetometer
- Enable eMMC and MMC on A100 Perf1
* tag 'sunxi-dt-for-6.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a100: perf1: Add eMMC and MMC node
arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer
arm64: dts: sun50i-a64-pinephone: Add mount-matrix for PinePhone magnetometers
arm64: dts: sun50i-a64-pinephone: Add AF8133J to PinePhone
ARM: dts: allwinner: Remove accidental suniv duplicates
arm64: allwinner: a100: Add MMC related nodes
arm64: dts: allwinner: a100: add usb related nodes
dt-bindings: usb: sunxi-musb: Add A100 compatible string
dt-bindings: usb: Add A100 compatible string
dt-bindings: phy: sun50i-a64: add a100 compatible
arm64: dts: allwinner: a100: add watchdog node
arm64: dts: allwinner: A100: Add PMU mode
ARM: dts: sunxi: add support for RerVision A33-Vstar board
dt-bindings: arm: sunxi: document RerVision A33-Vstar board
arm64: dts: allwinner: Add disable-wp for boards with micro SD card
arm64: dts: allwinner: h313/h616/h618/h700: Enable audio codec for all supported boards
arm64: dts: allwinner: h616: Add audio codec node
Link: https://lore.kernel.org/r/ZzC-OF57MT_yCeWH@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V Devicetrees for v6.13
StarFive:
Support for the DeepComputing FML13V01, a Framework laptop compatible
with a JH7110. This board is fairly different to the more standard SBCs
offerings that the kernel already supports, so there's also some
refactoring of jh7110-common.dtsi to move out nodes unused on the new
board.
Spacemit:
A vendor prefix I grabbed from the basic support series, since its
dependencies are not yet ready but peripheral drivers have started being
merged.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: starfive: add DeepComputing FML13V01 board device tree
dt-bindings: riscv: starfive: add deepcomputing,fml13v01
dt-bindings: vendor: add deepcomputing
riscv: dts: starfive: jh7110-common: move usb0 config to board dts
riscv: dts: starfive: jh7110-common: revised device node
dt-bindings: vendor-prefixes: add spacemit
Link: https://lore.kernel.org/r/20241108-washboard-material-6b9ff196063d@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
mvebu dt64 for 6.13 (part 1)
armada-*: Drop undocumented SATA phy names
* tag 'mvebu-dt64-6.13-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: Drop undocumented SATA phy names
Link: https://lore.kernel.org/r/878qtu83vh.fsf@BLaptop.bootlin.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
mvebu dt for 6.13 (part 1)
turris-omnia: prepare device tree for LED brightness change detection
kirkwood: fix at24 EEPROM node name
* tag 'mvebu-dt-6.13-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: turris-omnia: Add global LED brightness change interrupt
ARM: dts: marvell: kirkwood: Fix at24 EEPROM node name
Link: https://lore.kernel.org/r/87bjyq83x0.fsf@BLaptop.bootlin.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.13, round 1
Highlights:
----------
- MPU:
- STM32MP13:
- ST DK board:
- Add support of WLAN/BT Murata Type 1DX module.
- DH SOM:
- Add M24256E EEPROM suport.
- STMP32MP15:
- Use IWDG2 as wakeup source.
- Add support of WLAN/BT Murata Type 1DX module on DK2 board.
- STM32MP25:
- Enable RTC.
- Add DMA support for U(S)ART, I2C and SPI instances.
* tag 'stm32-dt-for-v6.13-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
arm64: dts: st: add DMA support on SPI instances of stm32mp25
arm64: dts: st: add DMA support on I2C instances of stm32mp25
arm64: dts: st: add DMA support on U(S)ART instances of stm32mp25
arm64: dts: st: add RNG node on stm32mp251
arm64: dts: st: enable RTC on stm32mp257f-ev1 board
arm64: dts: st: add RTC on stm32mp25x
ARM: dts: stm32: add support of WLAN/BT on stm32mp135f-dk
ARM: dts: stm32: add support of WLAN/BT on stm32mp157c-dk2
ARM: dts: stm32: rtc, add LSCO to WLAN/BT module on stm32mp135f-dk
ARM: dts: stm32: rtc, add LSCO to WLAN/BT module on stm32mp157c-dk2
ARM: dts: stm32: rtc, add pin to provide LSCO on stm32mp13
ARM: dts: stm32: rtc, add pin to provide LSCO on stm32mp15
ARM: dts: stm32: Describe M24256E write-lockable page in DH STM32MP13xx DHCOR SoM DT
ARM: dts: stm32: Add IWDG2 EXTI interrupt mapping and mark as wakeup source
Link: https://lore.kernel.org/r/92d2d6df-cc5c-488f-8ebd-550b1903db12@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.13
Generic Fixups/Cleanups:
- Cleanup bootph-* tags to limit to leaf nodes only
- clock IDs for MCSPI instances fixed up across J7xx family
- Misc indentation and whitespace cleanup across dts
New SoC
- J742s2 which is a cutdown of existing J784s4 and uses same EVM
SoC Specific features and Fixes:
- eQEP (counter) support across AM64/AM62/AM62A
AM64
- M4F Remoteproc support
- stats collection support for ICSSGs via ti,pa-stats
- Add PCIe EP overlays
AM65
- stats collection support for ICSSGs via ti,pa-stats
AM62:
- M4F Remoteproc support
- eMMC/SD TAP value updates
- dtbs_check fixes for opp_efuse_table
AM62A
- 1.4GHz opp entry
AM62P
- 1.4GHz opp entry
J7200
- Add PCIe EP overlays
- Pinmux node reg range fixes
Board Specific
AM62
- am62 verdin ivy carrier board support
- am625-verdin TPM device support
- am62 verdin ivy board support
- Beagleplay Mikrobus PWM header support
- am62-verdin increase SD regulator startup delay
AM64
- am642-phyboard-electra-rdk trickle charger support
- am64-phy* drop buswidth from sdhci nodes
* tag 'ti-k3-dt-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (61 commits)
arm64: dts: ti: k3-am62: use opp_efuse_table for opp-table syscon
arm64: dts: ti: k3-am62p5-sk: add 1.4ghz opp entry
arm64: dts: ti: k3-am62p: add opp frequencies
arm64: dts: ti: k3-am62a7-sk: add 1.4ghz opp entry
arm64: dts: ti: k3-am62a: add opp frequencies
arm64: dts: ti: k3-am62-verdin: Add Ivy carrier board
arm64: dts: ti: k3-am62-verdin: add label to som adc node
dt-bindings: arm: ti: Add verdin am62 ivy board
arm64: dts: ti: k3-am642-phyboard-electra-rdk: Enable trickle charger
arm64: dts: ti: k3-am64-phycore-som: Add M4F remoteproc nodes
arm64: dts: ti: k3-am62-phycore-som: Add M4F remoteproc nodes
arm64: dts: ti: minor whitespace cleanup
arm64: dts: ti: k3-am62x-phyboard-lyra: Fix indentation in audio-card
arm64: dts: ti: k3-am642-phyboard-electra-rdk: Fix bus-width property in MMC nodes
arm64: dts: ti: k3-am64-phycore-som: Fix bus-width property in MMC nodes
arm64: dts: ti: k3-am642-evm: Add overlay for PCIe0 EP mode
arm64: dts: ti: k3-j7200-evm: Add overlay for PCIE1 Endpoint Mode
arm64: dts: ti: k3-am62-main: Update otap/itap values
arm64: dts: ti: k3-am625-beagleplay: Enable MikroBUS PWM
arm64: dts: ti: k3-am62-verdin: Fix SD regulator startup delay
...
Link: https://lore.kernel.org/r/3ded4795-2186-4e06-bda6-9c9a65a3fdb9@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM64 DT changes for v6.13:
- Add PWM nodes for Amlogic A1 & C3
- Addd missing power-domains properties
- Fix G12 uart node name
* tag 'amlogic-arm64-dt-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: amlogic: Add Amlogic C3 PWM
arm64: dts: meson-g12-common: fix uart-ao-a typo
arm64: dts: meson: a1: bind power domain to temperature sensor
arm64: dts: meson: a1: add definitions for meson PWM
Link: https://lore.kernel.org/r/6fb3d64a-3913-4db0-9cdc-336af32a88a9@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM DT changes for v6.13:
- DT fixes to pass bindings chedk, including:
- fixing nodes names
- dropping meson6 ATV1200 board
- add missing properties
* tag 'amlogic-arm-dt-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
ARM: dts: amlogic: meson8/8b: remove invalid pinctrl reg
ARM: dts: amlogic: meson8b-ec100: add missing gpio-line-names entry
ARM: dts: amlogic: meson8b-ec100: add missing clocks property in sound card
ARM: dts: amlogic: meson8-minix-neo-x8: fix invalid pnictrl-names
ARM: dts: amlogic: add missing phy-mode in ethmac node
ARM: dts: amlogic: meson8: use correct pinctrl bank node name
ARM: dts: amlogic: fix /memory node name
ARM: dts: amlogic: meson8b-odroidc1: fix invalid reset-gpio
ARM: dts: amlogic: meson6: remove support for ATV1200 board
ARM: dts: amlogic: meson8: fix ao_arc_sram node name
ARM: dts: amlogic: meson8: fix soc thermal-zone node name
ARM: dts: amlogic: meson6: fix clk81 node name
Link: https://lore.kernel.org/r/ffaa3755-8c5d-4fc3-86bf-9129d3889bff@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/dt
RISC-V Devicetrees for v6.13
Sophgo:
Add pinctrl support for CV1800B & CV1812H.
Add SARADC support for CV1800B.
Add initial LicheeRV-Nano/SG2002.
Add emmc/sdio support for Huashan-Pi/CV1812H.
Add power-key support for PioneerBox/SG2042.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* tag 'riscv-sophgo-dt-for-v6.13' of https://github.com/sophgo/linux:
riscv: dts: sophgo: Add emmc support for Huashan Pi
riscv: dts: sophgo: Add sdio configuration for Huashan Pi
riscv: dts: sophgo: fix pinctrl base-address
riscv: sophgo: dts: add power key for pioneer box
riscv: dts: sophgo: Add SARADC description for Sophgo CV1800B
riscv: dts: sophgo: Add LicheeRV Nano board device tree
riscv: dts: sophgo: Add initial SG2002 SoC device tree
riscv: dts: sophgo: cv1812h: add pinctrl support
riscv: dts: sophgo: cv1800b: add pinctrl support
Link: https://lore.kernel.org/r/MA0P287MB2822DC23E1EE47A5C7D41476FE532@MA0P287MB2822.INDP287.PROD.OUTLOOK.COM
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
PL022 binding require two clocks to be defined but LG1312 and LG1313
platforms don't comply with bindings and define only one clock.
Update spi clocks and clocks-names property by adding appropriate clock
reference to make it compliant with bindings.
CC: Chanho Min <chanho.min@lge.com>
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241105-dts-spi-fixes-v2-2-623501e5d1ca@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
PL022 binding require two clocks to be defined but AMD seattle platform
does't comply with binding and define only one clock i.e apb_pclk.
Update spi clocks and clocks-names property by adding appropriate clock
reference to make it compliant with bindings.
CC: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20241105-dts-spi-fixes-v2-1-623501e5d1ca@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree changes for v6.13
Introduce descriptions of the 8cx Gen3-based Microsoft Surface Pro 9 5G,
X Elite based Dell XPS 13 9345, the QCS9100 platform and the "Ride"
development boards thereon, and the SM7325 platform and the Nothing
Phone 1.
MSM8998 gains support for HDMI. The Lenovo Miix 630 gains support for
volume keys, audio and sensor DSPs, touchscreen, and its specific WiFi
calibration variant.
On QCM6490, Fairphone FP5 gains a thermistor adjacent to UFS/RAM, while
the IDP gains UFS and WiFi support. For QCS6490 changes to Rb3Gen2
enables WiFi, Venus, PCIe, SD-card, and volume keys. Adreno speedbins
are adjusted and PMU nodes' compatibles for the two clusters are
corrected.
The DB845C/RB3 and QRB5165 RB5 vision mezzanines are converted to
DeviceTree overlays, and both gains CMA heap for libcamera to use.
SA8775P gains GPI DMA support, support for controlling download mode
(bootloader-assisted ramdump support), additional UARTs, and qcrypto
support. The "Ride" development board gains WiFi and Bluetooth support.
On SC8280XP (8cx Gen3) another UART is described, used in the
Microsoft Surface 9 5G. The WiFi/BT combo chip's power management unit
is described on the CRD and Lenovo ThinkPad X13s.
On SDM630/660 the GPU SMMU and clock controller is added, as is the
A2Noc and LPASS SMMU, and the DSP-based WiFi device. GPU, modem DSP and
WiFi is then enabled on the Inforce 6560 development board.
On SM8450 Hardware Development Kit, the WCN6855 is modelled to enable
WiFi and Bluetooth. A "global" interrupt is defined on SM8450 PCIe RC
controller, to enable hotplug.
On X Elite, USB Type-C controllers are marked as usb-role-switch
capable, the GICv3 ITS is enabled for PCIe. TCSR region is described and
wired up to allow setting and cleaning the download mode
(bootloader-assisted ramdump) flag, and residency numbers for C4/C5 are
updated.
USB role switch is enabled on Lenovo ThinkPad T14s and the ASUS Vivobook
S15. The T14s also gains support for a second source trackpad. The
Microsoft Surface Laptop gains LID switch and the USB Type-A connector
attached to the multiport controller is enabled. The CRD has its HID
device power supplies described.
Application SMMU is flagged as DMA coherent across QDU1000, SC7180,
SC8180X, SC8280XP, SDM670, SDM845, SM8150, SM8350, SM8450, and X1E80100.
In addition to this, the effort to improve style and binding compliance
continued.
* tag 'qcom-arm64-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (120 commits)
arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Add cma heap for libcamera softisp support
arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Add cma heap for libcamera softisp support
arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Drop redundant clock-lanes from camera@1a
arm64: dts: qcom: sc8280xp-x13s: Drop redundant clock-lanes from camera@10
arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Convert mezzanine riser to dtso
arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Convert mezzanine riser to dtbo
arm64: dts: qcom: sm8450-hdk: model the PMU of the on-board wcn6855
arm64: dts: qcom: sc8280xp-x13s: model the PMU of the on-board wcn6855
arm64: dts: qcom: sc8280xp-crd: enable bluetooth
arm64: dts: qcom: sc8280xp-crd: model the PMU of the on-board wcn6855
arm64: dts: qcom: qcs9100: Add support for the QCS9100 Ride and Ride Rev3 boards
dt-bindings: arm: qcom: Document qcs9100-ride and qcs9100-ride Rev3
arm64: dts: qcom: x1e80100: Update C4/C5 residency/exit numbers
arm64: dts: qcom: x1e80100-crd: describe HID supplies
arm64: dts: qcom: msm8998-lenovo-miix-630: add WiFi calibration variant
arm64: dts: qcom: msm8998-clamshell: enable resin/VolDown
arm64: dts: qcom: msm8998-lenovo-miix-630: enable VolumeUp button
arm64: dts: qcom: msm8998-lenovo-miix-630: enable aDSP and SLPI
arm64: dts: qcom: msm8998-lenovo-miix-630: enable touchscreen
arm64: dts: qcom: qcs6490-rb3gen2: Add PCIe nodes
...
Link: https://lore.kernel.org/r/20241105164901.7787-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/dt
ARM: dts: OMAP updates for v6.13
Misc. minor updates for OMAP3, OMAP4, AM3 and DRA7 platforms.
* tag 'omap-for-v6.13/dt-signed-1' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
ARM: dts: omap4-kc1: fix twl6030 power node
ARM: dts: am335x-bone-common: Increase MDIO reset deassert delay to 50ms
ARM: dts: ti/omap: omap4-epson-embt2ws: add charger
ARM: dts: omap36xx: declare 1GHz OPP as turbo again
ARM: ti/omap: omap3-gta04a5: add Bluetooth
ARM: dts: ti/omap: dra7: fix redundant clock divider definition
ARM: dts: ti/omap: use standard node name for twl4030 charger
ARM: dts: omap: omap4-epson-embt2ws: add GPIO expander
ARM: dts: omap: omap4-epson-embt2ws: add unknown gpio outputs
ARM: dts: omap: omap4-epson-embt2ws: wire up regulators
ARM: dts: omap: omap4-epson-embt2ws: define GPIO regulators
ARM: dts: ti: dra7: Remove double include of clock bindings
ARM: dts: ti: omap3434-sdp: drop linux,mtd-name from onenand node
ARM: dts: ti: omap: am335x-baltos: drop "gpmc,device-nand" from NAND node
ARM: dts: ti: drop linux,mtd-name from NAND nodes
ARM: dts: ti/omap: Fix at24 EEPROM node names
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.13 (take two)
- Add a CPU Operating Performance Points table for the RZ/V2H SoC,
- Add Battery Backup Function (VBATTB) and RTC support for the RZ/G3S
SoC and the RZ/G3S SMARC SoM,
- Add DMAC support for MMC on the RZ/A1H SoC and the Genmai
development board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.13-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: rzg3s-smarc-som: Enable RTC
arm64: dts: renesas: rzg3s-smarc-som: Enable VBATTB
arm64: dts: renesas: r9a08g045: Add RTC node
arm64: dts: renesas: r9a08g045: Add VBATTB node
arm64: dts: renesas: white-hawk-cpu-common: Add pin control for DSI-eDP IRQ
ARM: dts: renesas: r7s72100: Add DMA support to MMCIF
ARM: dts: renesas: r7s72100: Add DMAC node
arm64: dts: renesas: hihope: Drop #sound-dai-cells
dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB
dt-bindings: clock: r9a08g045-cpg: Add power domain ID for RTC
arm64: dts: renesas: r9a09g057: Add OPP table
Link: https://lore.kernel.org/r/cover.1730726155.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM64 DeviceTree updates for v6.13
MT8195 (also called MT8395)
- Enabled GPU support on Genio 1200 EVK
- Added sound-dai-cells for audio codec on MT8195 Cherry Chromebooks
MT8192:
- Added support Asurada Chromebook variants with Synaptics trackpad
MT8188 (also called MT8390):
- Added support for CPU DVFS, IOMMU, PWM hardware, SPMI bus,
Audio, socinfo, PCI-Express, DisplayPort, MIPI DSI, Ethernet,
Video HW Encoders (Stateful) and HW Decoders (Stateless),
JPEG HW Encoder/Decoder.
- Enabled GPU support on Genio 700 EVK
MT8183:
- Added support for Video HW Encoders (Stateful)
- Added HDMI support on MT8183 Pumpkin board
- Fixed some regulators to provide the actual description of the
power rails in MT8183 Kukui Chromebooks
- Disabled DPI display interface on MT8183 Kukui Chromebooks
to fix internal display probing
- Fixed address of EEPROM found on MT8183 Kakadu/Kodama Chromebooks
- Added SCL internal delay on I2C2 bus for improved I2C-HID devices
reliability on MT8183 Jacuzzi Chromebooks
MT7988:
- Added support for eFuses and UART controllers
Plus, addition of OF Graph support in MediaTek MMSYS and some cleanups
and dtbs_check fixes for MT8195 and for all machines using the MT6358
PMIC.
* tag 'mtk-dts64-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (55 commits)
arm64: dts: mediatek: mt8183-kukui: Drop bogus fixed regulators
arm64: dts: mediatek: mt8183-kukui-jacuzzi: Add supplies for fixed regulators
arm64: dts: mediatek: mt8183-kukui-jacuzzi: Fix DP bridge supply names
arm64: dts: mediatek: mt6358: fix dtbs_check error
arm64: dts: mediatek: mt8186-corsola: Fix IT6505 reset line polarity
arm64: dts: mt8183: Damu: add i2c2's i2c-scl-internal-delay-ns
arm64: dts: mt8183: cozmo: add i2c2's i2c-scl-internal-delay-ns
arm64: dts: mt8183: burnet: add i2c2's i2c-scl-internal-delay-ns
arm64: dts: mt8183: fennel: add i2c2's i2c-scl-internal-delay-ns
dt-bindings: arm: mediatek: mmsys: Add OF graph support for board path
arm64: dts: mediatek: mt8186-corsola: Fix GPU supply coupling max-spread
arm64: dts: mediatek: mt8195-cherry: Use correct audio codec DAI
arm64: dts: mediatek: mt8188: Fix USB3 PHY port default status
arm64: dts: mediatek: mt8173-elm-hana: Add vdd-supply to second source trackpad
arm64: dts: mediatek: mt8186-corsola-voltorb: Merge speaker codec nodes
arm64: dts: mediatek: mt8390-genio-700-evk: Enable ethernet
arm64: dts: mediatek: mt8188: Add ethernet node
arm64: dts: mediatek: mt8188: Add eDP and DP TX nodes
arm64: dts: mediatek: mt8188: Add DP-INTF nodes
arm64: dts: mediatek: mt8188: Add display nodes for vdosys1
...
Link: https://lore.kernel.org/r/20241104112625.161365-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree changes for 6.13:
- New device support: Boundary Device Nitrogen8MP, Kontron OSM-S i.MX8MP
SoM and BL carrier board, Verdin Ivy carrier board, DHCOM SoM on DRC02
and PicoITX, Gateworks GW82XX-2X, etc.
- A series from Carlos Song to add LPSPI alias for i.MX8 and i.MX9 SoCs
- A couple of changes from Ciprian Marian Costea to improve S32G uSDHC
and SD/eMMC support
- A couple of changes from Francesco Dolcini to improve SD regulator
startup delay for Verdin devices
- A bunch of changes from Frank Li to add I3C overlay for imx93-9x9-qsb,
enable PCIe and SATA for imx8qm-mek, add various devices for imx8qxp-mek,
fix dt-schema warnings, etc.
- A series from João Paulo Gonçalves to improve i.MX8 Apalis and i.MX8M
Verdin board support
- A set of changes from Laurentiu Mihalcea to enable dsp node for rproc
usage in audio subsystem
- A set of changes from Peng Fan to improve i.MX95 support, adding SCMI,
thermal zone, cooling device, idle states, etc.
- A series from Richard Zhu to add PCIe and SATA support for imx8dxl-evk
- A series from Shengjiu Wang to enable audio features on imx93-9x9-qsb
and imx8ulp-evk board
- Other small and random changes
* tag 'imx-dt64-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (92 commits)
arm64: dts: freescale: imx8mp-verdin: Fix SD regulator startup delay
arm64: dts: freescale: imx8mm-verdin: Fix SD regulator startup delay
arm64: dts: imx8mp-verdin: add single-master property to all i2c nodes
arm64: dts: imx8mm-verdin: add single-master property to all i2c nodes
arm64: dts: imx95: Add missing vendor string to SCMI property
arm64: dts: imx8mp-navqp: Add HDMI support
arm64: dts: imx8qm-ss-hsio: fix PCI and SATA clock indices
arm64: dts: imx8qm-ss-hsio: fix interrupt-map indent under pci* nodes
arm64: dts: imx8qxp-mek: replace hardcode 0 with IMX_LPCG_CLK_0
arm64: dts: imx8mn-tqma8mqnl-mba8mx-usbot: fix coexistence of output-low and output-high in GPIO
arm64: dts: layerscape: remove en25s64 and only keep jedec,spi-nor compatible string
arm64: dts: imx8mp-kontron-dl: change touchscreen power-supply to AVDD28-supply
arm64: dts: imx8mp: Add Boundary Device Nitrogen8MP Universal SMARC Carrier Board
arm64: dts: imx8: move samsung,burst-clock-frequency to imx8mn and imx8mm mba8mx board file
arm64: dts: mba8mx: remove undocumented 'data-lanes' at panel
arm64: dts: imx: Add i.MX8M Plus Gateworks GW82XX-2X support
arm64: dts: imx8ulp-evk: Add spdif sound card support
arm64: dts: imx8ulp-evk: Add bt-sco sound card support
arm64: dts: imx8ulp: Add audio device nodes
arm64: dts: imx8qm-mek: enable dsp node for rproc usage
...
Link: https://lore.kernel.org/r/20241104090055.1881860-5-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree changes for 6.13:
- New device support: Kobo Clara 2E, Comvetia LXR board, i.MX6DL DHCOM
SoM on PDK2 carrier
- A bunch of dt-schema warning fixes from Fabio Estevam
- A set of changes from Hiago De Franco to update audio card for Apalis
and Colibri devices
- A series from Marek Vasut to improve pin config nodes according to
bindings
- A couple of changes from Sean Nyekjaer to add DMA support i.MX6UL
UART ports
- Other small and random changes
* tag 'imx-dt-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (39 commits)
ARM: dts: imx: Add devicetree for Kobo Clara 2E
ARM: dts: imx6sll: Improve gpc description
ARM: dts: imx6sl: Pass tempmon #thermal-sensor-cells
ARM: dts: imx6sx: Fix tempmon description
ARM: dts: imx6sll: Remove regulator-3p0 unit address
ARM: dts: imx6sll: Fix the last SPDIF clock name
ARM: dts: imx7ulp: Remove incorrect mmc fallback compatible
ARM: dts: imx6sl: Remove incorrect mmc fallback compatible
ARM: dts: imx6sx: Remove incorrect mmc fallback compatible
ARM: dts: imx6sl/sll: Add the "fsl,imx6dl-gpt" fallback
ARM: dts: imx6ul: Drop duplicate space in iomux node groups
ARM: dts: imx6sx: Align pin config nodes with bindings
ARM: dts: imx6sl: imx6sll: Align pin config nodes with bindings
ARM: dts: imx6qp: Align pin config nodes with bindings
ARM: dts: imx6qdl: Align pin config nodes with bindings
ARM: dts: imx6q: Align pin config nodes with bindings
ARM: dts: imx6dl: Align pin config nodes with bindings
ARM: dts: imx53: Align pin config nodes with bindings
ARM: dts: imx51: Align pin config nodes with bindings
ARM: dts: imx50: Align pin config nodes with bindings
...
Link: https://lore.kernel.org/r/20241104090055.1881860-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindings changes for 6.13:
- Add vendor prefix for ComVetia AG
- Add new board compatibles for Kobo Clara 2E, Boundary Device Nitrogen8MP,
Comvetia LXR, Kontron i.MX8MP OSM-S, Verdin i.MX8MM/P Ivy, DH Electronics
DHCOM, IOTA2 Lumpy, Gateworks GW82XX-2x
- A couple changes from Fabio Estevam to improve imx-anatop and imx-gpc
bindings
- A fsl,dsp bindings update from Laurentiu Mihalcea to correct power domain
count
* tag 'imx-bindings-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: add compatible strings for Kobo Clara 2E
dt-bindings: power: fsl,imx-gpc: Document fsl,imx6sll-gpc
dt-bindings: soc: imx: fsl,imx-anatop: Add additional regulators
dt-bindings: soc: imx: fsl,imx-anatop: Fix the i.MX7 irq number
dt-bindings: arm: fsl: Add Boundary Device Nitrogen8MP Universal SMARC Carrier Board
dt-bindings: arm: fsl: Add Gateworks GW82XX-2x dev kit
dt-bindings: dsp: fsl,dsp: fix power domain count
dt-bindings: arm: fsl: Document i.MX6DL DHCOM SoM on PDK2 carrier board
dt-bindings: arm: fsl: Document DH electronics i.MX8M Plus DHCOM PicoITX
dt-bindings: arm: fsl: Document DH i.MX8MP DHCOM SoM on DRC02 carrier board
dt-bindings: arm: Add i.MX8MP IOTA2 Lumpy board
dt-bindings: arm: freescale: Add verdin imx8mp ivy board
dt-bindings: arm: freescale: Add verdin imx8mm ivy board
dt-bindings: arm: fsl: Document the Comvetia LXR board
dt-bindings: vendor-prefixes: Add an entry for ComVetia AG
dt-bindings: arm: fsl: Add Kontron i.MX8MP OSM-S based boards
Link: https://lore.kernel.org/r/20241104090055.1881860-3-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm32 DeviceTree updates for v6.13
IPQ4019 flash partition scheme is moved to nvmem-layout. SDX55 and SDX65
PCIe EP controllers gain missing linux,pci-domain properties.
Stylistic improvements across a range of platforms and devices.
* tag 'qcom-arm32-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: ipq4019: use nvmem-layout
ARM: dts: qcom: change labels to lower-case
ARM: dts: qcom: sdx65: Add 'linux,pci-domain' to PCIe EP controller node
ARM: dts: qcom: sdx55: Add 'linux,pci-domain' to PCIe EP controller node
ARM: dts: qcom: minor whitespace cleanup
ARM: dts: qcom: drop underscore in node names
Link: https://lore.kernel.org/r/20241104034744.14378-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt
SoCFPGA DTS updates for v6.13
- Fix dts warning for at24 EEPROM node names
* tag 'socfpga_dts_updates_for_v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: socfpga: Fix at24 EEPROM node names
Link: https://lore.kernel.org/r/20241101190046.912598-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/dt
arm64: ZynqMP DT changes for 6.13
- Enable AMS for all boards including HWMON
- Add thermal zones
* tag 'zynqmp-dt-for-6.13' of https://github.com/Xilinx/linux-xlnx:
arm64: zynqmp: Add thermal zones
arm64: zynqmp: Expose AMS to userspace as HWMON
arm64: zynqmp: Enable AMS for all boards
Link: https://lore.kernel.org/r/CAHTX3d+x1WrXhsp6+PQbo-B3T9q21tqE1RkhVsh0r7my3vH37g@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New SoCs: basic RK3528 support, RK3399S - a variant made specifically
for the Pinephone Pro and for consistencies sake it gets its own SoC
dtsi to not hide the specifics in the Pinephone Pro devicetree.
New boards: OrangePi-5b, NanoPi R3S, ArmSom Sige 5 (first rk3576 board),
Radxa e20c (first rk3528 board), Powkiddy RGB20SX, RK3588S-EVB1 and
the ArmSoM LM7 SoM with W3 carrier board.
HDMI support for rk3588 brings the first graphical output capability
there. This includes of course needed changes to a number of boards.
And finally a bunch of newly enabled peripherals on different boards,
as well as changes to adhere better to bindings and removal/change of
deprecated properties.
* tag 'v6.13-armsoc/dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (64 commits)
arm64: dts: rockchip: Add rk3588-orangepi-5b device tree
dt-bindings: arm: rockchip: Add Orange Pi 5b enum to Orange Pi 5 entry
arm64: dts: rockchip: refactor common Orange Pi 5 board
arm64: dts: rockchip: Remove 'enable-active-low' from two boards
arm64: dts: rockchip: add HDMI support to rk3588-jaguar
arm64: dts: rockchip: add HDMI support to rk3588-tiger-haikou
arm64: dts: rockchip: add HDMI pinctrl to rk3588-tiger SoM
arm64: dts: rockchip: reorder mmc aliases for NanoPi R3S
arm64: dts: rockchip: enable eMMC HS200 mode for NanoPi R3S
arm64: dts: rockchip: sort props in pmu_io_domains node for NanoPi R3S
arm64: dts: rockchip: replace deprecated snps,reset props for NanoPi R3S
arm64: dts: rockchip: fix model name for FriendlyElec NanoPi R3S
arm64: dts: rockchip: Enable HDMI0 on rock-5a
arm64: dts: rockchip: Enable HDMI0 on rk3588-nanopc-t6
arm64: dts: rockchip: pwm-leds for Orange Pi 5
arm64: dts: rockchip: reorder audio/hdmi nodes in Orange Pi 5
arm64: dts: rockchip: analog audio on Orange Pi 5
arm64: dts: rockchip: Add dtsi file for RK3399S SoC variant
arm64: dts: rockchip: Convert dts files used as parents to dtsi files
arm64: dts: rockchip: fix the pcie refclock oscillator on Rock 5 ITX
...
Link: https://lore.kernel.org/r/12542111.O9o76ZdvQC@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.13
1. Add new SoC Samsung Exynos8895 and new board using it: Samsung
Galaxy S8 (SM-G950F) mobile phone. Only small support so far:
CPUs (Samsung Mongoose M2), main clock controllers (FSYS, PERIC,
TOP), pin controllers, SPI for cameras, timers.
2. Add new SoC Samsung Exynos990 and new board using it: Samsung
Galaxy Note20 5G (c1s/SM-N981B) mobile phone. Only minimal support
so far: CPUs (Samsung Mongoose M5), pin controllers, timers.
3. Prepare for adding new SoC Samsung Exynos9810 - add bindings. The
SoC DTSI was not yet ready, but it is posted on the mailing lists so
should come soon.
4. ExynosAutov920: Add several clock controllers.
* tag 'samsung-dt64-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: arm: samsung: Document Exynos9810 and starlte board binding
dt-bindings: soc: samsung: exynos-pmu: Add exynos9810 compatible
dt-bindings: arm: cpus: Add Samsung Mongoose M3
arm64: dts: exynos8895: Add spi_0/1 nodes
arm64: dts: exynos8895: Add Multi Core Timer (MCT) node
arm64: dts: exynos8895: Add clock management unit nodes
dt-bindings: timer: exynos4210-mct: Add samsung,exynos8895-mct compatible
dt-bindings: clock: samsung: Add Exynos8895 SoC
arm64: dts: exynos: Add initial support for Samsung Galaxy Note20 5G (c1s)
arm64: dts: exynos: Add initial support for the Exynos 990 SoC
dt-bindings: arm: samsung: samsung-boards: Add bindings for Exynos 990 boards
dt-bindings: arm: cpus: Add Samsung Mongoose M5
arm64: dts: exynosautov920: add peric1, misc and hsi0/1 clock DT nodes
dt-bindings: clock: exynosautov920: add peric1, misc and hsi0/1 clock definitions
arm64: dts: exynos: Add initial support for Samsung Galaxy S8
arm64: dts: exynos: Add initial support for exynos8895 SoC
dt-bindings: soc: samsung: exynos-pmu: Add exynos8895 compatible
dt-bindings: arm: samsung: Document dreamlte board binding
dt-bindings: arm: cpus: Add Samsung Mongoose M2
Link: https://lore.kernel.org/r/20241029081002.21106-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Device tree changes for v6.13-rc1
Changes in this batch add an device tree file for the industrial module
version of the Jetson AGX Orin Developer Kit. There are also some fixes
for the Jetson TX1 and new features such as touchscreen, temperature
sensor and USB-C extcon support for Smaug (a.k.a. Pixel C).
* tag 'tegra-for-6.13-arm64-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: smaug: Declare cros-ec extcon
arm64: tegra: Add SDMMC sdr104-offsets for Tegra X1
arm64: dts: nvidia: tegra210-smaug: Add TMP451 temperature sensor node
arm64: dts: nvidia: tegra210-smaug: Add touchscreen node
arm64: tegra: p2180: Add mandatory compatible for WiFi node
arm64: tegra: Create SKU8 AGX Orin board file
Link: https://lore.kernel.org/r/20241025150555.2558582-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v6.13-rc1
This adds documentation for the AGX Orin industrial module.
* tag 'tegra-for-6.13-dt-bindings' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: arm: Tegra234 Industrial Module
Link: https://lore.kernel.org/r/20241025150555.2558582-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into soc/dt
Ux500 DTS file updates for the v6.13 kernel cycle:
- Add touchkeys to the Samsung Codina variants
- Re-work the Codina device tree for eMMC
* tag 'ux500-dts-for-v6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: Reconfigure the MC2 eMMC interface
ARM: dts: ux500: Add touchkeys to Codinas
Link: https://lore.kernel.org/r/CACRpkda5rix2JLYpexXTeGqKBcHeWxZx7A49jYCCmDPU7CFLSA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.13
- Add support for PCIe on the R-Car V4M SoC and the Gray Hawk
development board,
- Add support for watchdog, OS timer, keyboard switch, SDHI, and MMCIF
on the Genmai development board,
- Add support for watchdog on the RSK+RZA1 development board,
- Add support for QSPI NOR FLASH on the RZ/G2UL SMARC SoM,
- Add support for E-FUSE on the R-Car V3U, S4-8, V4H, and V4M SoCs,
- Use interrupts-extended where it makes sense,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.13-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (53 commits)
arm64: dts: renesas: rzg3s-smarc: Use interrupts-extended for gpio-keys
arm64: dts: renesas: beacon-renesom: Use interrupts-extended for touchscreen
arm64: dts: renesas: Use interrupts-extended for WLAN
arm64: dts: renesas: Use interrupts-extended for video decoders
arm64: dts: renesas: Use interrupts-extended for USB muxes
arm64: dts: renesas: Use interrupts-extended for PMICs
arm64: dts: renesas: Use interrupts-extended for I/O expanders
arm64: dts: renesas: Use interrupts-extended for HDMI bridges
arm64: dts: renesas: Use interrupts-extended for Ethernet PHYs
arm64: dts: renesas: Use interrupts-extended for DisplayPort bridges
ARM: dts: renesas: kzm9g: Use interrupts-extended for sensors
ARM: dts: renesas: kzm9g: Use interrupts-extended for I/O expander
ARM: dts: renesas: r8a7742-iwg21m: Use interrupts-extended for RTC
ARM: dts: renesas: iwg22d-sodimm: Use interrupts-extended for port expander
ARM: dts: renesas: Use interrupts-extended for video decoders
ARM: dts: renesas: Use interrupts-extended for touchpanels
ARM: dts: renesas: Use interrupts-extended for PMICs
ARM: dts: renesas: Use interrupts-extended for HDMI bridges
ARM: dts: renesas: Use interrupts-extended for Ethernet PHYs
ARM: dts: renesas: Use interrupts-extended for Ethernet MACs
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
T-HEAD Devicetrees for v6.13, part 2
Add gmac, mdio, and phy nodes to enable the gigabit Ethernet ports on
the TH1520 SoC-based BeagleV Ahead and Sipeed Lichee Pi 4a boards.
The dwmac-thead driver and dt binding have been accepted by netdev and
are in linux-next as well as the dts patch in this pull request. I have
tested next-20241108 on the Ahead and LPi4a boards, and Ethernet works
correctly.
Signed-off-by: Drew Fustini <drew@pdp7.com>
* tag 'thead-dt-for-v6.13-p2' of https://github.com/pdp7/linux:
riscv: dts: thead: Add TH1520 ethernet nodes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
T-HEAD Devicetrees for v6.13
Add nodes for pin controllers on the T-Head TH1520 RISC-V SoC. The
yaml binding and pinctrl-th1520 driver has been merged into next by
Linus W and will be included in the 6.13 pinctrl PR.
The TH1520 GPIO controllers are already supported by the gpio-dwapb
driver. This PR improves GPIO support by adding GPIO ranges and GPIO
line names for the BeagleV Ahead and LicheePi 4A boards. Support is
added for the built-in LEDs on the Ahead board.
Signed-off-by: Drew Fustini <drew@pdp7.com>
* tag 'thead-dt-for-v6.13' of https://github.com/pdp7/linux:
riscv: dts: thead: remove enabled property for spi0
riscv: dts: thead: Add missing GPIO clock-names
riscv: dtb: thead: Add BeagleV Ahead LEDs
riscv: dts: thead: Add TH1520 pinctrl settings for UART0
riscv: dts: thead: Add Lichee Pi 4M GPIO line names
riscv: dts: thead: Adjust TH1520 GPIO labels
riscv: dts: thead: Add TH1520 GPIO ranges
riscv: dts: thead: Add TH1520 pin control nodes
|
|
A100 perf1 hava MicroSD slot and on-board eMMC module, add support for them.
Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
Link: https://patch.msgid.link/20241031070232.1793078-11-masterr3c0rd@epochal.quest
[wens@csie.org: cherry-picked out of series and GPIO header inclusion added]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The way InvenSense MPU-6050 accelerometer is mounted on the user-facing side
of the Pine64 PinePhone mainboard, which makes it rotated 90 degrees counter-
clockwise, [1] requires the accelerometer's x- and y-axis to be swapped, and
the direction of the accelerometer's y-axis to be inverted.
Rectify this by adding a mount-matrix to the accelerometer definition in the
Pine64 PinePhone dtsi file.
[1] https://files.pine64.org/doc/PinePhone/PinePhone%20mainboard%20bottom%20placement%20v1.1%2020191031.pdf
Fixes: 91f480d40942 ("arm64: dts: allwinner: Add initial support for Pine64 PinePhone")
Cc: stable@vger.kernel.org
Suggested-by: Ondrej Jirman <megi@xff.cz>
Suggested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Link: https://patch.msgid.link/129f0c754d071cca1db5d207d9d4a7bd9831dff7.1726773282.git.dsimic@manjaro.org
[wens@csie.org: Replaced Helped-by with Suggested-by]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The preferred nodename for fixed-regulators has changed to
pattern: '^regulator(-[0-9]+v[0-9]+|-[0-9a-z-]+)?$'
Fix all Rockchip DT regulator nodenames.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/cfc3cfe1-086b-48f1-9b89-f17c9391d3cc@gmail.com
[Also include the backlight-regulator and panel-regulator from
rk3288-veyron-edp, and adapt the Pinky device accordingly]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
For lis3mdl, values are based on datasheet and PCB drawing
and tested on a real device.
For af8133j, values are from testing on a real device.
Signed-off-by: Shoji Keita <awaittrot@shjk.jp>
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Link: https://patch.msgid.link/20240908214718.36316-3-andrej.skvortzov@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
New batches of PinePhones switched the magnetometer to AF8133J from
LIS3MDL because lack of ST components.
Both chips use the same PB1 pin, but in different modes.
LIS3MDL uses it as an gpio input to handle interrupt.
AF8133J uses it as an gpio output as a reset signal.
It wasn't possible at runtime to enable both device tree nodes and
detect supported sensor at probe time, because both drivers try to
acquire the same gpio in different modes.
Device tree fixup will be done in firmware without introducing new board
revision and new dts.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Link: https://patchwork.ozlabs.org/project/uboot/patch/20240211092824.395155-1-andrej.skvortzov@gmail.com/
Link: https://patch.msgid.link/20240908214718.36316-2-andrej.skvortzov@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Add gmac, mdio, and phy nodes to enable the gigabit Ethernet ports on
the BeagleV Ahead and Sipeed Lichee Pi 4a boards.
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
[drew: change apb registers from syscon to second reg of gmac node,
add phy reset delay properties for beaglev ahead]
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
|
|
Allwinner suniv boards' DT files were accidentally duplicated
in the Makefile when they were moved to the new directory
structure. Remove these duplicates for code cleanness.
Fixes: 724ba6751532 ("ARM: dts: Move .dts files to vendor sub-directories")
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20241104230628.3736186-1-csokas.bence@prolan.hu
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
While "phy-names" is allowed for sata-port nodes, the names used aren't
documented and are incorrect ("sata-phy" is what's documented). The name
for a single entry is fairly useless, so just drop the property.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
dtbs_check was moaning about twl6030-power, use the standard property
instead.
Apparently that twl6030 power snippet slipped in without the
corresponding driver. Now it is handled by the standard property.
CC: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Paul Kocialkowski <contact@paulk.fr>
Link: https://lore.kernel.org/r/20240915193527.1071792-1-andreas@kemnade.info
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Commit b9bf5612610aa7e3 ("ARM: dts: am335x-bone-common: Increase MDIO
reset deassert time") already increased the MDIO reset deassert delay
from 6.5 to 13 ms, but this may still cause Ethernet PHY probe failures:
SMSC LAN8710/LAN8720 4a101000.mdio:00: probe with driver SMSC LAN8710/LAN8720 failed with error -5
On BeagleBone Black Rev. C3, ETH_RESETn is controlled by an open-drain
AND gate. It is pulled high by a 10K resistor, and has a 4.7µF
capacitor to ground, giving an RC time constant of 47ms. As it takes
0.7RC to charge the capacitor above the threshold voltage of a CMOS
input (VDD/2), the delay should be at least 33ms. Considering the
typical tolerance of 20% on capacitors, 40ms would be safer. Add an
additional safety margin and settle for 50ms.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/9002a58daa1b2983f39815b748ee9d2f8dcc4829.1730366936.git.geert+renesas@glider.be
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
When global LED brightness is changed by pressing the front button on
Turris Omnia, the MCU can produce an interrupt to the CPU. Add the
description of this interrupt to the LED controller node.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
at24.yaml defines the node name for at24 EEPROMs as 'eeprom'.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
Add another entry in the wkup_conf for the syscon node, and then use
that for the syscon in opp-table.
Marking entire wkup_conf as "syscon", "simple-mfd" is wrong and needs to
be addressed similar to how other child-nodes in wkup_conf are implemented
in the same file.
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20241104063707.3604302-1-d-gole@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
A couple of the fixed regulators in the Kukui dtsi do not actually
exist in the hardware design; they are simply power rails connected
together with 0 ohm bridges.
Drop them and assign their upstream supplies to their consumers instead.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20241030070224.1006331-5-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
When the fixed regulators for the LCD panel and DP bridge were added,
their supplies were not modeled in. These, except for the 1.0V supply,
are just load switches, and need and have a supply.
Add the supplies for each of the fixed regulators.
Fixes: cabc71b08eb5 ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20241030070224.1006331-4-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Some of the regulator supplies for the MIPI-DPI-to-DP bridge and their
associated nodes are incorrectly named. In particular, the 1.0V supply
was modeled as a 1.2V supply.
Fix all the incorrect names, and also fix the voltage of the 1.0V
regulator.
Fixes: cabc71b08eb5 ("arm64: dts: mt8183: Add kukui-jacuzzi-damu board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20241030070224.1006331-3-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Fix DTBS check errors for 'mt6358codec' and 'mt6358regulator':
Error message is:
pmic: 'mt6358codec' and 'mt6358regulator' does not match any of the
regexes: 'pinctrl-[0-9]+'.
Rename these two device node to generic 'audio-codec' and 'regulators'.
Fixes: 9f8872221674 ("arm64: dts: mt6358: add PMIC MT6358 related nodes")
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20241029064647.13370-1-macpaul.lin@mediatek.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The reset line of the IT6505 bridge chip is active low, not active high.
It was incorrectly inverted in the device tree as the implementation at
the time incorrectly inverted the polarity in its driver, due to a prior
device having an inline inverting level shifter.
Fix the polarity now while the external display pipeline is incomplete,
thereby avoiding any impact to running systems.
A matching fix for the driver should be included if this change is
backported.
Fixes: 8855d01fb81f ("arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool")
Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20241029100226.660263-1-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
The power switch used to power the SD card interface might have
more than 2ms turn-on time, increase the startup delay to 20ms to
prevent failures.
Fixes: a39ed23bdf6e ("arm64: dts: freescale: add initial support for verdin imx8m plus")
Cc: stable@vger.kernel.org
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The power switch used to power the SD card interface might have
more than 2ms turn-on time, increase the startup delay to 20ms to
prevent failures.
Fixes: 6a57f224f734 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Cc: stable@vger.kernel.org
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
