| Age | Commit message (Collapse) | Author |
|---|
|
Eliminate the following smatch warning:
drivers/scsi/pm8001/pm8001_ctl.c:760 pm8001_update_flash() warn:
inconsistent indenting
Link: https://lore.kernel.org/r/20220208025500.29511-1-yang.lee@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Instead of doing a cast to storage that is too small, add a union for the
high 64 bits. Silences the warnings under -Warray-bounds:
drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c: In function 'ibmvscsis_send_messages':
drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:1934:44: error: array subscript 'struct viosrp_crq[0]' is partly outside array bounds of 'u64[1]' {aka 'long long unsigned int[1]'} [-Werror=array-bounds]
1934 | crq->valid = VALID_CMD_RESP_EL;
| ^~
drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:1875:13: note: while referencing 'msg_hi'
1875 | u64 msg_hi = 0;
| ^~~~~~
There is no change to the resulting binary instructions.
Link: https://lore.kernel.org/lkml/20220125142430.75c3160e@canb.auug.org.au
Link: https://lore.kernel.org/r/20220208061231.3429486-1-keescook@chromium.org
Cc: Michael Cyr <mikecyr@linux.ibm.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Tyrel Datwyler <tyreld@linux.ibm.com>
Cc: linux-scsi@vger.kernel.org
Cc: target-devel@vger.kernel.org
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This done routine will delete the timer and check for its return value and
decrease the reference count accordingly. This prevents boot hangs reported
after commit 31e6cdbe0eae ("scsi: qla2xxx: Implement ref count for SRB")
was merged.
Link: https://lore.kernel.org/r/20220208093946.4471-1-njavali@marvell.com
Fixes: 31e6cdbe0eae ("scsi: qla2xxx: Implement ref count for SRB")
Reported-by: Ewan Milne <emilne@redhat.com>
Tested-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Link: https://lore.kernel.org/r/164375215867.440833.17567317655622946368.stgit@brunhilda.pdev.net
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Gerry Morong <gerry.morong@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Correct lsscsi -t output for newer controllers that support 16-byte WWID in
the SAS address field. lsscsi -t was displaying all zeros for SAS
addresses.
When we added support to smartpqi for 16-byte WWIDs in the RPL data for
newer controllers, we were copying the wrong part of the 16-byte WWID to
the SAS address field.
Link: https://lore.kernel.org/r/164375215363.440833.7298523719813806902.stgit@brunhilda.pdev.net
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Restructure the hibernate/suspend code to allow workarounds for the
controller boot differences.
Newer controllers have subtle differences in the way that they boot up.
Link: https://lore.kernel.org/r/164375214859.440833.14683009064111314948.stgit@brunhilda.pdev.net
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add calls to the functions at the beginning driver initialization.
The BUILD_BUG_ON() statements that are currently in functions named
verify_structures() in the modules smartpqi_init.c and smartpqi_sis.c do
not work as currently implemented.
Link: https://lore.kernel.org/r/164375214355.440833.13129778749209816497.stgit@brunhilda.pdev.net
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Correct NUMA node association when calling pqi_pci_probe().
In the function pqi_pci_probe(), the driver makes an OS call to get the
NUMA node associated with a controller. If the call returns that there is
no associated node, the driver attempts to set it to node 0. The problem is
that a different local variable (cp_node) was being used to do this, but
the original local variable (node) was still being used in the call to
pqi_alloc_ctrl_info().
The value of "node" is not updated if the conditional after the call to
dev_to_node() evaluates to TRUE.
Link: https://lore.kernel.org/r/164375213850.440833.5243014942807747074.stgit@brunhilda.pdev.net
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove UNIQUE_WWID_IN_REPORT_PHYS_LUN PQI feature.
This feature was originally added to solve a problem with NVMe drives, but
this problem has since been solved a different way, so this PQI feature is
no longer required for any type of drive.
The kernel was not creating symbolic links in sysfs between SATA drives and
their enclosure.
The driver was enabling the UNIQUE_WWID_IN_REPORT_PHYS_LUN PQI feature,
which causes the FW to return a WWID for SATA drives that is derived from a
unique ID read from the SATA drive itself. The driver was exposing this
WWID as the drive's SAS address. However, because this SAS address does not
match the SAS address returned by an enclosure's SES Page 0xA data, the
Linux kernel was not able to match a SATA drive with its enclosure.
Link: https://lore.kernel.org/r/164375213346.440833.12379222470149882747.stgit@brunhilda.pdev.net
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use all data disks for sequential read operations.
Testing discovered inconsistent performance on RAID 10 volumes when
performing 256K sequential reads. The driver was only using a single
tracker to determine which physical drive to send a request to for AIO
requests.
Change the single tracker (next_bypass_group) to an array of trackers based
on the number of data disks in a row of the RAID map.
Link: https://lore.kernel.org/r/164375212842.440833.6733971458765002128.stgit@brunhilda.pdev.net
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Avoid dropping into shell if the controller is in locked up state.
Driver issues SIS soft reset to bring back the controller to SIS mode while
OS boots into kdump mode.
If the controller is in lockup state, SIS soft reset does not work.
Since the controller lockup code has not been cleared, driver considers the
firmware is no longer up and running. Driver returns back an error code to
OS and the kdump fails.
Link: https://lore.kernel.org/r/164375212337.440833.11955356190354940369.stgit@brunhilda.pdev.net
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
After modifying logical volume size, lsblk command still shows previous
size of logical volume.
When the driver gets any event from firmware it schedules rescan worker
with delay of 10 seconds. If array expansion is so quick that it gets
completed in a second, the driver could not catch logical volume expansion
due to worker delay.
Since driver does not detect volume expansion, driver would not call
rescan device to update new size to the OS.
Link: https://lore.kernel.org/r/164375211833.440833.17023155389220583731.stgit@brunhilda.pdev.net
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
On certain systems (based on PCI IDs), when the OS transitions the system
into the suspend (S3) state, the BMIC flush cache command will indicate a
system RESTART instead of SUSPEND.
This avoids drive spin-down.
Link: https://lore.kernel.org/r/164375211330.440833.7203813692110347698.stgit@brunhilda.pdev.net
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Sagar Biradar <sagar.biradar@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Change PQI_HZ to HZ.
PQI_HZ macro was set to 1000 when HZ value is less than 1000. By default,
PQI_HZ will result into a delay of 10 seconds(for kernel, which has HZ =
100). So in this case when firmware raises an event, rescan worker will be
scheduled after a delay of (10 x PQI_HZ) = 100 seconds instead of 10
seconds.
Also driver uses PQI_HZ at many instances, which might result in some other
issues with respect to delay.
Link: https://lore.kernel.org/r/164375210825.440833.15510172447583227486.stgit@brunhilda.pdev.net
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Balsundar P <balsundar.p@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use correct pqi_aio_path_request structure to calculate the offset to
sg_descriptors.
The function pqi_aio_submit_io() uses the pqi_raid_path_request structure
to calculate the offset of the structure member sg_descriptors. This is
incorrect. It should be using the pqi_aio_path_request structure instead.
This typo is benign because the offsets are the same in both structures.
Link: https://lore.kernel.org/r/164375210321.440833.2566086558909686629.stgit@brunhilda.pdev.net
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Rename the function pqi_is_io_high_priority() to pqi_is_io_high_priority().
Remove 2 unnecessary lines from the function, and adjusted the white space.
Link: https://lore.kernel.org/r/164375209818.440833.10908948825731635853.stgit@brunhilda.pdev.net
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Return DID_NO_CONNECT when a path failure is detected.
When a path fails during I/O and AIO path gets disabled for a multipath
device, the I/O was retried in the RAID path slowing down path fail
detection. Returning DID_NO_CONNECT allows multipath to switch paths more
quickly.
Link: https://lore.kernel.org/r/164375209313.440833.9992416628621839233.stgit@brunhilda.pdev.net
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Sagar Biradar <sagar.biradar@microchip.com>
Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Avoid drive spin down during a warm boot.
Call the BMIC Flush Cache command (0xc2) to indicate the reason for the
flush cache (shutdown, hibernate, suspend, or restart).
Link: https://lore.kernel.org/r/164375208810.440833.11254644025650871435.stgit@brunhilda.pdev.net
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Sagar Biradar <sagar.biradar@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add device attribute 'sas_ncq_prio_enable' to enable SATA NCQ priority
support and provide I/O priority in SCSI command and pass priority
information to controller firmware.
This device attribute works only when device has NCQ priority support and
controller firmware can handle I/Os with NCQ priority attribute.
Link: https://lore.kernel.org/r/164375208306.440833.7392577382127815362.stgit@brunhilda.pdev.net
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Signed-off-by: Gilbert Wu <Gilbert.Wu@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add in new ZTE controllers:
VID / DID / SVID / SDID
---- ---- ---- ----
ZTE SmartROC3100 RS241-18i 2G 9005 / 028F / 1CF2 / 5449
ZTE SmartROC3100 RS242-18i 4G 9005 / 028F / 1CF2 / 544A
ZTE SmartIOC2100 RS243-18i 9005 / 028F / 1CF2 / 544B
ZTE SmartROC3100 RM241B-18i 2G 9005 / 028F / 1CF2 / 544D
ZTE SmartROC3100 RM242B-18i 4G 9005 / 028F / 1CF2 / 544E
ZTE SmartIOC2100 RM243B-18i 9005 / 028F / 1CF2 / 544F
Add PCI ID for 1100-24i controller:
VID / DID / SVID / SDID
---- ---- ---- ----
HBA 1100-24i 9005 / 028F / 9005 / 1304
Add PCI IDs for HPE and Adaptec devices:
VID / DID / SVID / SDID
---- ---- ---- ----
Adaptec Smart HBA 2200-8io /e 9005 / 028F / 9005 / 1463
Adaptec Smart HBA 2200-16io /e 9005 / 028F / 9005 / 14C2
HPE SR308i-p Gen11 9005 / 028F / 1590 / 0382
HPE SR308i-o Gen11 9005 / 028F / 1590 / 0383
HPE SR932i-p Gen11 9005 / 028F / 1590 / 0381
Add PCI IDs for Inspur controllers:
VID / DID / SVID / SDID
---- ---- ---- ----
INSPUR RS0800M5H24i 9005 / 028F / 1BD4 / 006B
INSPUR RS0800M5E8I 9005 / 028F / 1BD4 / 006C
INSPUR RS0800M5H8I 9005 / 028F / 1BD4 / 006D
INSPUR RS0804M5R16i 9005 / 028F / 1BD4 / 006F
INSPUR RS0800M5E16i 9005 / 028F / 1BD4 / 0070
INSPUR RS0800M5H16i 9005 / 028F / 1BD4 / 0071
INSPUR RS0800M5E16i 9005 / 028F / 1BD4 / 0072
NT RAID 3100-24i 9005 / 028F / 1F0C / 3161
Add HPE and Adaptec OROC PCI IDs:
VID / DID / SVID / SDID
---- ---- ---- ----
HPE SR216i-o Gen11 9005 / 028F / 9005 / 036F
Adaptec SmartRAID 3284-16io /e/uC 9005 / 028F / 9005 / 1473
Adaptec SmartRAID 3254-16io /e 9005 / 028F / 9005 / 1474
Add PCI IDs for new channel controllers:
VID / DID / SVID / SDID
---- ---- ---- ----
Adaptec SmartRAID 3254-8i /e 9005 / 028F / 9005 / 14A4
Adaptec SmartRAID 3252-8i /e 9005 / 028F / 9005 / 14A5
Adaptec SmartRAID 3204-8i /e 9005 / 028F / 9005 / 14A6
Align PCI IDs with OOB driver. Easier to check for differences.
Link: https://lore.kernel.org/r/164375207802.440833.15947108153078495425.stgit@brunhilda.pdev.net
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Co-developed-by: Mike McGowen <Mike.McGowen@microchip.com>
Signed-off-by: Mike McGowen <Mike.McGowen@microchip.com>
Co-developed-by: Murthy Bhat <Murthy.Bhat@microchip.com>
Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com>
Co-developed-by: Sagar Biradar <sagar.biradar@microchip.com>
Signed-off-by: Sagar Biradar <sagar.biradar@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Prevent "BUG: scheduling while atomic: rmmod" stack trace.
Stop setting spin_locks before calling OS functions to remove devices.
Link: https://lore.kernel.org/r/164375207296.440833.4996145011193819683.stgit@brunhilda.pdev.net
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This converts to a flexible array instead of the old-style 1-element
arrays. The existing code already did the correct math for finding the size
of the resulting flexible array structure, so there is no binary
difference.
The other two structures converted to use flexible arrays appear to have no
users at all.
Link: https://lore.kernel.org/r/20220201223948.1455637-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The USB storage driver can complete its requests directly from a kernel
thread. Use scsi_done_direct() to avoid waking ksoftirqd.
Link: https://lore.kernel.org/r/20220201210954.570896-3-sebastian@breakpoint.cc
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add scsi_done_direct() which behaves like scsi_done() except that it
invokes blk_mq_complete_request_direct() in order to complete the request.
Callers from process context can complete the request directly instead
waking ksoftirqd.
Link: https://lore.kernel.org/r/Yfw7JaszshmfYa1d@flow
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If a SCSI device handler module is loaded after some SCSI devices have
already been probed (e.g. via request_module() by dm-multipath), the
"access_state" and "preferred_path" sysfs attributes remain invisible for
these devices, although the handler is attached and live. The reason is
that the visibility is only checked when the sysfs attribute group is first
created. This results in an inconsistent user experience depending on the
load order of SCSI low-level drivers vs. device handler modules.
This patch changes user space API: attempting to read the "access_state" or
"preferred_path" attributes will now result in -EINVAL rather than -ENODEV
for devices that have no device handler, and tests for the existence of
these attributes will have a different result.
Link: https://lore.kernel.org/r/20220127141351.30706-1-mwilck@suse.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
destroy_workqueue() already drains the queue before destroying it, so there
is no need to flush it explicitly.
Remove the redundant flush_workqueue() call.
Link: https://lore.kernel.org/r/20220127014330.1185114-1-chi.minghao@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
destroy_workqueue() already drains the queue before destroying it, so there
is no need to flush it explicitly.
Remove the redundant flush_workqueue() calls.
Link: https://lore.kernel.org/r/20220127013934.1184923-1-chi.minghao@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
coccinelle report:
./drivers/scsi/bfa/bfad_attr.c:908:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:860:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:888:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:853:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:808:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:728:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:822:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:927:9-17:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:900:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:874:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:714:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/bfa/bfad_attr.c:839:8-16:
WARNING: use scnprintf or sprintf
Use sysfs_emit() instead of scnprintf() or sprintf().
Link: https://lore.kernel.org/r/def83ff75faec64ba592b867a8499b1367bae303.1643181468.git.yang.guang5@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
coccinelle report:
./drivers/scsi/mvsas/mv_init.c:699:8-16:
WARNING: use scnprintf or sprintf
./drivers/scsi/mvsas/mv_init.c:747:8-16:
WARNING: use scnprintf or sprintf
Use sysfs_emit() instead of scnprintf() or sprintf().
Link: https://lore.kernel.org/r/c1711f7cf251730a8ceb5bdfc313bf85662b3395.1643182948.git.yang.guang5@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: David Yang <davidcomponentone@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Repalce kthread_create/wake_up_process() with kthread_run() to simplify the
code.
Link: https://lore.kernel.org/r/20220126014248.466806-1-yinxiujiang@kylinos.cn
Signed-off-by: Yin Xiujiang <yinxiujiang@kylinos.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Replace 'Offlaod' with 'Offload'.
Link: https://lore.kernel.org/r/20220128063101.6953-1-cai.huoqing@linux.dev
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Because WB performs writes in SLC mode, it is not possible to use
WriteBooster indefinitely. Vendors can set a lifetime limit in the device.
If the lifetime exceeds this limit, the device ican disable the WB feature.
The feature is defined in the "bWriteBoosterBufferLifeTimeEst (IDN = 1E)"
attribute.
With lifetime exceeding the limit value, the current driver continuously
performs the following query:
- Write Flag: WB_ENABLE / DISABLE
- Read attr: Available Buffer Size
- Read attr: Current Buffer Size
This patch recognizes that WriteBooster is no longer supported by the
device, and prevents unnecessary queries.
Link: https://lore.kernel.org/r/1891546521.01643252701746.JavaMail.epsvc@epcpadp3
Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Jinyoung Choi <j-young.choi@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Log subpages are starting to appear in real devices (e.g. SSDs) so add
support for one. Adopt approach where all "wild" sub-pages are themselves
listed as long as there is at least one non-wild page or subpage for a
given page number.
Link: https://lore.kernel.org/r/20220109012853.301953-10-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
By default, this driver places a read lock around all user data fetches and
a write lock around all user data modifying operations (e.g. WRITE
commands). These locks have "per store" granularity. Other drivers that
have a similar function (e.g. null_blk) do not take this data integrity
step and run significantly faster in some tests.
In the common case of a (simulated) device to device copy (e.g. what dd
and its variants do) there should be no need for locks around data
accesses. So add the driver and sysfs parameter no_rwlock which is boolean
and when set does what its name suggests. The default is false for backward
comaptibility.
Link: https://lore.kernel.org/r/20220109012853.301953-7-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
To distinguish between resets sent by the SCSI mid-level error
handling and newly introduced devices (LUs), this Unit Attention:
power on, reset, or bus reset occurred [0x29,0x0]
has been subdivided into that UA for the reset case and this new UA:
power on occurred [0x29,0x1]
for the new device (LU) case. This makes debug a little easier to follow
when it is turned on (e.g. 'echo 0x1 > opts').
Bump driver version number.
Link: https://lore.kernel.org/r/20220109012853.301953-6-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Refine the sdebug_blk_mq_poll() function so it only takes the spinlock on
the queue when it can see one or more requests with the in_use bitmap flag
set.
Link: https://lore.kernel.org/r/20220109012853.301953-5-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When the internal in_use bit array in this driver is full returning
SCSI_MLQUEUE_HOST_BUSY leads to the mid-level reissuing the request which
is unhelpful. Previously TASK SET FULL status was only returned if ALL_TSF
[0x400] is placed in the opts variable (at load time or via sysfs). Now
ignore that setting and always return TASK SET FULL when in_use array is
full. Also set DID_ABORT together with TASK SET FULL so the mid-level gives
up immediately.
Aside: the situations addressed by this patch lead to lockups and
timeouts. They have only been detected when blk_poll() is used. That
mechanism is relatively new in the SCSI subsystem suggesting the mid-level
may need more work in that area.
Link: https://lore.kernel.org/r/20220109012853.301953-4-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Use READ_ONCE() and WRITE_ONCE() macros when accessing the
sdebug_defer::defer_t value.
Link: https://lore.kernel.org/r/20220109012853.301953-3-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When scsi_debug is loaded as a module with many (simulated) hosts, targets,
and devices (LUs), modprobe can take a long time to return. Only a small
amount of this time is spent in the scsi_debug_init(); the rest is other
parts of the kernel reacting to to the appearance of new storage
devices. As soon as scsi_debug_init() has completed the user space may call
'rmmod scsi_debug' and this was found to cause race problems as outlined
here:
https://bugzilla.kernel.org/show_bug.cgi?id=212337
To reliably generate this race a sysfs parameter called rm_all_hosts was
added and the code was strengthened in this area. The main change was to
make the count of scsi_debug hosts present an atomic. Then it was found
that the handling of the existing add_host parameter needed the same
strengthening. Further: 'echo -9999 >
/sys/bus/pseudo/drivers/scsi_debug/add_host has the same effect as
rm_all_hosts so rm_all_hosts was not needed.
To inhibit a race between two invocations of writes to add_host, a mutex
was added. Also address a possible race when rmmod is called but LUs are
still being added.
The logic to remove (all) hosts is rather crude: it works backwards down a
linked lists of hosts. Any pending requests are terminated with
DID_NO_CONNECT as are any new requests. In the case where not all hosts are
being removed, the ones that remain may have lost requests as just
outlined. The lowest numbered host (id) hosts will remain.
Cc: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220109012853.301953-2-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Link: https://lore.kernel.org/r/20220110050218.3958-18-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
While allocating firmware dump, check if dump is already collected and do
not re-allocate the buffer.
Link: https://lore.kernel.org/r/20220110050218.3958-17-njavali@marvell.com
Cc: stable@vger.kernel.org
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This is an update to the original 28xx adapter enablement. Add a bunch of
conditionals that are applicable for 28xx.
Link: https://lore.kernel.org/r/20220110050218.3958-16-njavali@marvell.com
Fixes: ecc89f25e225 ("scsi: qla2xxx: Add Device ID for ISP28XX")
Cc: stable@vger.kernel.org
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
[ 12.323788] BUG: using smp_processor_id() in preemptible [00000000] code: systemd-udevd/1020
[ 12.332297] caller is qla2xxx_create_qpair+0x32a/0x5d0 [qla2xxx]
[ 12.338417] CPU: 7 PID: 1020 Comm: systemd-udevd Tainted: G I --------- --- 5.14.0-29.el9.x86_64 #1
[ 12.348827] Hardware name: Dell Inc. PowerEdge R610/0F0XJ6, BIOS 6.6.0 05/22/2018
[ 12.356356] Call Trace:
[ 12.358821] dump_stack_lvl+0x34/0x44
[ 12.362514] check_preemption_disabled+0xd9/0xe0
[ 12.367164] qla2xxx_create_qpair+0x32a/0x5d0 [qla2xxx]
[ 12.372481] qla2x00_probe_one+0xa3a/0x1b80 [qla2xxx]
[ 12.377617] ? _raw_spin_lock_irqsave+0x19/0x40
[ 12.384284] local_pci_probe+0x42/0x80
[ 12.390162] ? pci_match_device+0xd7/0x110
[ 12.396366] pci_device_probe+0xfd/0x1b0
[ 12.402372] really_probe+0x1e7/0x3e0
[ 12.408114] __driver_probe_device+0xfe/0x180
[ 12.414544] driver_probe_device+0x1e/0x90
[ 12.420685] __driver_attach+0xc0/0x1c0
[ 12.426536] ? __device_attach_driver+0xe0/0xe0
[ 12.433061] ? __device_attach_driver+0xe0/0xe0
[ 12.439538] bus_for_each_dev+0x78/0xc0
[ 12.445294] bus_add_driver+0x12b/0x1e0
[ 12.451021] driver_register+0x8f/0xe0
[ 12.456631] ? 0xffffffffc07bc000
[ 12.461773] qla2x00_module_init+0x1be/0x229 [qla2xxx]
[ 12.468776] do_one_initcall+0x44/0x200
[ 12.474401] ? load_module+0xad3/0xba0
[ 12.479908] ? kmem_cache_alloc_trace+0x45/0x410
[ 12.486268] do_init_module+0x5c/0x280
[ 12.491730] __do_sys_init_module+0x12e/0x1b0
[ 12.497785] do_syscall_64+0x3b/0x90
[ 12.503029] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 12.509764] RIP: 0033:0x7f554f73ab2e
Link: https://lore.kernel.org/r/20220110050218.3958-15-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
28XX adapters are capable of detecting both T10 PI tag escape values as
well as IP guard. This was missed due to the adapter type missed in the
corresponding macros. Fix this by adding support for 28xx in those macros.
Link: https://lore.kernel.org/r/20220110050218.3958-14-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Tested-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Silence compile warning due to unaligned memory access.
qla_edif.c:713:45: warning: taking address of packed member 'u' of class or
structure 'auth_complete_cmd' may result in an unaligned pointer value
[-Waddress-of-packed-member]
fcport = qla2x00_find_fcport_by_pid(vha, &appplogiok.u.d_id);
Link: https://lore.kernel.org/r/20220110050218.3958-13-njavali@marvell.com
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix smatch-reported warning message:
drivers/scsi/qla2xxx/qla_target.c:3324 qlt_xmit_response() warn: missing error
code 'res'
Link: https://lore.kernel.org/r/20220110050218.3958-12-njavali@marvell.com
Fixes: 4a8f71014b4d ("scsi: qla2xxx: Fix unmap of already freed sgl")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
A device logout in loop topology initiates a device connection teardown
which loses the FW device handle. In loop topo, the device handle is not
regrabbed leading to device login failures and eventually to loss of the
device. Fix this by taking the main login path that does it.
Link: https://lore.kernel.org/r/20220110050218.3958-11-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
queues
Add ql2xnvme_queues module parameter to configure number of NVMe queues
Usage:
Number of NVMe Queues that can be configured.
Final value will be min(ql2xnvme_queues, num_cpus, num_chip_queues),
1 - Minimum number of queues supported
8 - Default value
128 - Maximum number of queues supported
Link: https://lore.kernel.org/r/20220110050218.3958-10-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Corrected transmission speed mask values for FC.
Supported Speed: 16 32 20 Gb/s ===> Should be 64 instead of 20
Supported Speed: 16G 32G 48G ===> Should be 64G instead of 48G
Link: https://lore.kernel.org/r/20220110050218.3958-9-njavali@marvell.com
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bikash Hazarika <bhazarika@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Per FW request, Exec FW can fail due to temporary error resulting in driver
not attaching to the adapter. Add retry of this command up to 4 retries.
Link: https://lore.kernel.org/r/20220110050218.3958-8-njavali@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
