summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-02-20Revert "ARM: SPEAr13xx: Pass DW DMAC platform data from DT"Arnd Bergmann
This reverts commit f9965aa20706860077cfa093d04a6351c0c1e940. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-14ARM: dts: pl330: Add #dma-cells for generic dma binding supportPadmavathi Venna
This patch adds #dma-cells property to PL330 DMA controller nodes for supporting generic dma dt bindings on samsung exynos5250 platform. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-14DMA: PL330: Register the DMA controller with the generic DMA helpersPadmavathi Venna
This patch registers the pl330 dma controller driver with the generic device tree dma helper functions. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-14DMA: PL330: Add xlate functionPadmavathi Venna
Add xlate to translate the device-tree binding information into the appropriate format. The filter function requires the dma controller device and dma channel number as filter_params. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-14DMA: PL330: Add new pl330 filter for DT case.Padmavathi Venna
This patch adds a new pl330_dt_filter for DT case to filter the required channel based on the new filter params and modifies the old filter only for non-DT case as suggested by Arnd Bergmann. Signed-off-by: Padmavathi Venna <padma.v@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-14dma: tegra20-apb-dma: remove unnecessary assignmentAndy Shevchenko
There is no need to assign 0 to residue, because dma_cookie_status() does this for us. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-14edma: do not waste memory for dma_maskAndy Shevchenko
Accordingly to commentary in the platform_device_register_full the memory allocated for dma_mask will not going to be freed. That's why is better to assign dma_mask afterwards. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-14dma: coh901318: set residue only if dma is in progressAndy Shevchenko
When status is DMA_SUCCESS the residue should be zero. Otherwise it's a bug. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-14dma: coh901318: avoid unbalanced lockingAndy Shevchenko
In case the len is 0 we must return without trying to unlock the lock that was not locked. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-14dmaengine.h: remove redundant else keywordAndy Shevchenko
dmaengine_device_control returns -ENOSYS in case the dma driver doesn't have such functionality. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-14dma: of-dma: protect list write operation by spin_lockAndy Shevchenko
It's possible to have an inconsistency in the list due to unprotected operation on it. The patch adds a proper locking on the list operation. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-14dmaengine: ste_dma40: do not remove descriptors for cyclic transfersFabio Baltieri
Fix dma_tc_handle() to call d40_desc_remove() and d40_desc_done() only for non-cyclic transfers, as this was breaking ux500_pcm since introduced in: d49278e dmaengine: dma40: Add support to split up large elements Reported-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-14dma: of-dma.c: fix memory leakageCong Ding
The memory allocated to ofdma might be a leakage when error occurs. Signed-off-by: Cong Ding <dinggnu@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-14dw_dmac: apply default dma_mask if neededAndy Shevchenko
In some cases we got the device without dma_mask configured. We have to apply the default value to avoid crashes during memory mapping. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-13dmaengine: ioat - fix spare sparse complainFengguang Wu
>> drivers/dma/ioat/dma_v3.c:371:6: sparse: symbol 'ioat3_timer_event' was not declared. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-13dmaengine: move drivers/of/dma.c -> drivers/dma/of-dma.cVinod Koul
as requested by Rob Suggested-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-12ioatdma: fix race between updating ioat->head and IOAT_COMPLETION_PENDINGDave Jiang
There is a race that can hit during __cleanup() when the ioat->head pointer is incremented during descriptor submission. The __cleanup() can clear the PENDING flag when it does not see any active descriptors. This causes new submitted descriptors to be ignored because the COMPLETION_PENDING flag is cleared. This was introduced when code was adapted from ioatdma v1 to ioatdma v2. For v2 and v3, IOAT_COMPLETION_PENDING flag will be abandoned and a new flag IOAT_CHAN_ACTIVE will be utilized. This flag will also be protected under the prep_lock when being modified in order to avoid the race. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Dan Williams <djbw@fb.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-12dw_dmac: add support for Lynxpoint DMA controllersMika Westerberg
Intel Lynxpoint PCH Low Power Subsystem has DMA controller to support general purpose serial buses like SPI, I2C, and HSUART. This controller is enumerated from ACPI namespace with ACPI ID INTL9C60. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-28dw_dmac: return proper residue valueAndy Shevchenko
Currently the driver returns full length of the active descriptor which is wrong. We have to go throught the active descriptor and substract the length of each sent children in the chain from the total length along with the actual data in the DMA channel registers. The cyclic case is not handled by this patch due to len field in the descriptor structure is left untouched by the original code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-28dw_dmac: fill individual length of descriptorAndy Shevchenko
It will be useful to have the length of the transfer in the descriptor. The cyclic transfer functions remained untouched. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-28dw_dmac: introduce total_len field in struct dw_descAndy Shevchenko
By this new field we distinguish a total length of the chain and the individual length of each descriptor in the chain. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-28dw_dmac: remove unnecessary tx_list field in dw_dma_chanAndy Shevchenko
The soft LLP mode is working for active descriptor only. So, we do not need to have a copy of its pointer. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-28dw_dmac: print out DW_PARAMS and DWC_PARAMS when debugAndy Shevchenko
It's usefull to have the values of the DW_PARAMS and DWC_PARAMS printed when debug mode is enabled. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-28DMAEngine: sirf: lock the shared registers access in sirfsoc_dma_terminate_allBarry Song
Just like Russell pointed out in "DMAEngine: sirf: add DMA pause/resume support" at http://www.spinics.net/lists/arm-kernel/msg212496.html here I find sirfsoc_dma_terminate_all() has same problem, so move the locking to the front of registers access. Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-28DMAEngine: sirf: add DMA pause/resume supportBarry Song
pause/resume are important for users like ALSA sound drivers, this patches make the sirf prima2/marco support DMA commands DMA_PAUSE and DMA_RESUME. Signed-off-by: Barry Song <Baohua.Song@csr.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-21Merge tag 'ux500-dma40' of //git.linaro.org/people/fabiobaltieri/linux.gitVinod Koul
Pull ste_dma40 fixes from Fabio Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-20dw_dmac: move soft LLP code from tasklet to dwc_scan_descriptorsAndy Shevchenko
The proper place for the main logic of the soft LLP mode is dwc_scan_descriptors. It prevents to get the transfer unexpectedly aborted in case the user calls dwc_tx_status. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-20dw_dmac: don't exceed AHB master number in dwc_get_data_widthAndy Shevchenko
The driver assumes that hardware has two AHB masters which might not be always true. In such cases we must not exceed number of the AHB masters present in the hardware. In the proposed scheme in this patch, we would choose the master with highest possible number whenever we exceed max AHB masters. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-20dw_dmac: allocate dma descriptors from DMA_COHERENT memoryAndy Shevchenko
Currently descriptors are allocated from normal cacheable memory and that slows down filling the descriptors, as we need to call cache_coherency routines afterwards. It would be better to allocate memory for these descriptors from DMA_COHERENT memory. This would make code much cleaner too. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-20dma: sh/shdma-base.c: remove unnecessary null pointer checkCong Ding
the variable chan is dereferenced in line 635, so it is no reason to check null again in line 641. Signed-off-by: Cong Ding <dinggnu@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-20dma: remove unnecessary null pointer check in mmp_pdma.cCong Ding
the pointer cfg is dereferenced in line 594, so it's no reason to check null again in line 620. Signed-off-by: Cong Ding <dinggnu@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-20dma: edma: fix slave config dependency on directionMatt Porter
The edma_slave_config() implementation depends on the direction field such that it will not properly configure a slave channel when called without direction set. This fixes the implementation so that the slave config is copied as is and prep_slave_sg() handles the direction dependent handling. spi-omap2-mcspi and omap_hsmmc both expose this bug as they configure the slave channel config from a common path with an unconfigured direction field. Signed-off-by: Matt Porter <mporter@ti.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-14dmaengine: set_dma40: balance clock in probe fail codeFabio Baltieri
Clock code was changed to use clk_prepare_enable in: b707c65 dma/ste_dma40: Fixup clock usage during probe but clk_disable on probe fail path was not updated. This patch fix this by using clk_disable_unprepare in place of clk_disable. Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
2013-01-14dmaengine: set_dma40: ignore spurious interruptsFabio Baltieri
Some DMA channels may be used by other cores in the SoC. This patch modifies the dma interrupt handler to ignore interrupts from unknown channels. Cc: Rabin Vincent <rabin.vincent@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
2013-01-14dmaengine: ste_dma40: add software lli supportFabio Baltieri
This patch add support to manage LLI by SW for select phy channels. There is a HW issue in certain controllers due to which on certain occassions HW LLI cannot be used on some physical channels. To avoid the HW issue on a specific phy channel, the phy channel number can be added to the list of soft_lli_channels and there after all the transfers on that channel will use software LLI, for peripheral to memory transfers. SoftLLI introduces relink overhead, that could impact performace for certain use cases. This is based on a previous patch of Narayanan Gopalakrishnan. Cc: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
2013-01-14dmaengine: ste_dma40: minor code readability fixesFabio Baltieri
Use internal variables to the cycles to improve code readability, no functional changes. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
2013-01-14dmaengine: ste_dma40: minor cosmetic fixesFabio Baltieri
This patch contains various non functional cosmetic fixes. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
2013-01-14dmaengine: ste_dma40: add missing kernel-doc entryFabio Baltieri
Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
2013-01-14dmaengine: ste_dma40: add a done queue for completed descriptorsFabio Baltieri
This is to keep the active queue for only those transfers which are actually active in the hardware. Descriptors will be moved to the done queue after they are completed in the hardware (interrupt handler) but before all the cleanup work has been completed (tasklet). Mostly based on a previous patch by Rabin Vincent. Cc: Rabin Vincent <rabin.vincent@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
2013-01-14dmaengine: ste_dma40: support more than 128 event linesTong Liu
U8540 DMA controller is different from u9540 we need define new registers and use them to support handling more than 128 event lines. Signed-off-by: Tong Liu <tong.liu@stericsson.com> Reviewed-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
2013-01-14dmaengine: ste_dma40: physical channels number correctionGerald Baeza
DMAC_ICFG[0:2]=SCHNB only allows to count 'multiple of 4' physical channels so it was ok with platforms having 8 channels but cannot be used for next versions (with 10 or 14 channels). This patch allows to provide the number of physical channels for a DMA device via platform_data, or still rely on SCHNB if platform_data announces 0 channel. Signed-off-by: Gerald Baeza <gerald.baeza@stericsson.com> Reviewed-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
2013-01-14dmaengine: ste_dma40: support fixed physical channel allocationGerald Baeza
This patch makes existing use_fixed_channel field (of stedma40_chan_cfg structure) applicable to physical channels. Signed-off-by: Gerald Baeza <gerald.baeza@stericsson.com> Tested-by: Yannick Fertre <yannick.fertre@stericsson.com> Reviewed-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
2013-01-14dmaengine: ste_dma40: don't allow high priority dest event linesRabin Vincent
Hardware bug: when a logical channel is triggerred by a high priority destination event line, an extra packet transaction is generated in case of important data write response latency on previous logical channel A and if the source transfer of current logical channel B is already completed and if no other channel with a higher priority than B is waiting for execution. Software workaround: do not set the high priority level for the destination event lines that trigger logical channels. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Reviewed-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
2013-01-14dmaengine: ste_dma40: don't check for pm_runtime_suspended()Narayanan G
The check for runtime suspend is not needed during a regular suspend, as the framework takes care of this. This fixes the issue of DMA driver not letting the system to go to deepsleep in the first attempt. Signed-off-by: Narayanan G <narayanan.gopalakrishnan@stericsson.com> Reviewed-by: Rabin Vincent <rabin.vincent@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
2013-01-14dmaengine: ste_dma40: limit burst size to 16Per Forlin
The client is not aware of the maximum burst size in the dma driver. If the size exceeds 16 set max to 16. Signed-off-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
2013-01-14dmaengine: ste_dma40: set dma max seg sizePer Forlin
Maximum DMA seg size is (0xffff x data_width). If max seg size is not set it deafults to 64k. This results in failure if transferring 64k in byte mode. Large seg sizes may be supported by splitting large transfer. Signed-off-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
2013-01-14dmaengine: ste_dma40: use writel_relaxed for lcxaPer Forlin
lcpa and lcla are written often and the cache_sync() overhead in writel is costly, especially for wlan where every single network packet (in RX mode) corresponds to a separate DMA transfer. Signed-off-by: Per Forlin <per.forlin@stericsson.com> Reviewed-by: Narayanan Gopalakrishnan <narayanan.gopalakrishnan@stericsson.com> Reviewed-by: Rabin Vincent <rabin.vincent@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
2013-01-14dmaengine: ste_dma40: reset priority bit for logical channelsNarayanan
This patch sets the SSCFG/SDCFG bit[7] PRI only for physical channel requests with high priority. For logical channels, this bit will be zero. Signed-off-by: Narayanan G <narayanan.gopalakrishnan@stericsson.com> Reviewed-by: Rabin Vincent <rabin.vincent@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
2013-01-13pl080.h: moved from arm/include/asm/hardware to include/linux/amba/Alessandro Rubini
The header is used by drivers/dma/amba-pl08x.c, which can be compiled under x86, where PL080 exists under a PCI-to-AMBA bridge. This patche moves it where it can be accessed by other architectures, and fixes all users. Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-12dma: dw_dmac: clear suspend bit during terminationHeikki Krogerus
The DMA transfer could not be established if previously it was paused and terminated. In that case the channel's suspend bit remains set that prevents to transfer anything until channel is resumed. The patch adds the dwc_chan_resume() call instead of a plain flag assignment. That clears the DWC_CFGL_CH_SUSP bit as well during termination. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
generated by cgit (git 2.34.1) at 2025-03-21 13:26:12 +0000