summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-04-03Merge branch 'fixes' into miscJames Bottomley
Somewhat nasty merge due to conflicts between "33b28357dd00 scsi: qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan" and "2b5b96473efc scsi: qla2xxx: Fix FC-NVMe LUN discovery" Merge is non-trivial and has been verified by Qlogic (Cavium) Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
2018-03-21scsi: ufs: Add support for Auto-Hibernate Idle TimerAdrian Hunter
UFS host controllers may support an autonomous power management feature called the Auto-Hibernate Idle Timer. The timer is set to the number of microseconds of idle time before the UFS host controller will autonomously put the link into Hibernate state. That will save power at the expense of increased latency. Any access to the host controller interface registers will automatically put the link out of Hibernate state. So once configured, the feature is transparent to the driver. Expose the Auto-Hibernate Idle Timer value via SysFS to allow users to choose between power efficiency or lower latency. Set a default value of 150 ms. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: ufs: sysfs: reworking of the rpm_lvl and spm_lvl entriesStanislav Nijnikov
Read from these files will return the integer value of the chosen power management level now. Separate entries were added to show the target UFS device and UIC link states. The description of the possible power managements levels was added to the ABI file. The on-write behaviour of these entries wasn't changed. [mkp: typo] Signed-off-by: Stanislav Nijnikov <stanislav.nijnikov@wdc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: qla2xxx: fx00 copypaste typoMeelis Roos
Fix an obvious copy-paste error in freeing QLAFX00 response queue - the code checked for rsp->ring but freed rsp->ring_fx00. [mkp: applied by hand] Signed-off-by: Meelis Roos <mroos@linux.ee> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: qla2xxx: fix error message on <qla2400Meelis Roos
This patch fixes IO traps caught by hardware when mailbox command fails on qla2200. The error handler assumes newer firmware that is available on 2400 and newer HBA-s. This causes ugly crashes on sparc64. Fix it with separate debug prints on different firmware generations like most other places do. [mkp: updated based on feedback from Himanshu] Signed-off-by: Meelis Roos <mroos@linux.ee> Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: smartpqi: update driver versionDon Brace
Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Gerry Morong <gerry.morong@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: smartpqi: workaround fw bug for oq deletionKevin Barnett
Skip deleting PQI operational queues when there is an error creating a new queue group. It's not really necessary to delete the queues anyway because they get deleted during the PQI reset that is part of the error recovery path. Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: arcmsr: Change driver version to v1.40.00.05-20180309Ching Huang
Change driver version to v1.40.00.05-20180309 Signed-off-by: Ching Huang <ching2048@areca.com.tw> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: arcmsr: Sleep to avoid CPU stuck too long for waiting adapter readyChing Huang
Sleep to avoid CPU stuck too long for waiting adapter ready. Signed-off-by: Ching Huang <ching2048@areca.com.tw> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: arcmsr: Handle adapter removed due to thunderbolt cable disconnection.Ching Huang
Handle adapter removed due to thunderbolt cable disconnection. Signed-off-by: Ching Huang <ching2048@areca.com.tw> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: arcmsr: Rename ACB_F_BUS_HANG_ON to ACB_F_ADAPTER_REMOVED for adapter ↵Ching Huang
hot-plug Rename ACB_F_BUS_HANG_ON to ACB_F_ADAPTER_REMOVED for adapter hot-plug. Signed-off-by: Ching Huang <ching2048@areca.com.tw> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: qla2xxx: Update driver version to 10.00.00.06-khimanshu.madhani@cavium.com
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scanQuinn Tran
This patch combines FCP and FC-NVMe scan into single scan when driver detects FC-NVMe capability on same port. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: qla2xxx: Cleanup code to improve FC-NVMe error handlingDarren Trapp
This patch cleans up ABTS handling for FC-NVMe by - Removing allocation of sp, instead pass the sp pointer for abort IOCB - Fix error handling from Trasport failure - set outstanding_cmds array to NULL for nvme completion Signed-off-by: Darren Trapp <darren.trapp@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: qla2xxx: Fix FC-NVMe IO abort during driver resetDarren Trapp
Signed-off-by: Darren Trapp <darren.trapp@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: qla2xxx: Fix retry for PRLI RJT with reason of BUSYDarren Trapp
Signed-off-by: Darren Trapp <darren.trapp@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: qla2xxx: Remove nvme_done_listDarren Trapp
Signed-off-by: Darren Trapp <darren.trapp@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: qla2xxx: Return busy if rport going awayDarren Trapp
This patch adds mechanism to return EBUSY if rport is going away to prevent exhausting FC-NVMe layer's retry counter. Signed-off-by: Darren Trapp <darren.trapp@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: qla2xxx: Fix n2n_ae flag to prevent dev_loss on PDB changeDarren Trapp
On a port db changes, this patch will set n2n_ae flag for N2N connection when requesting for Report ID Acquition MBX, instead of Loop Initialization or point to point asynchronous events. Signed-off-by: Darren Trapp <darren.trapp@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: qla2xxx: Add FC-NVMe abort processingDarren Trapp
Signed-off-by: Darren Trapp <darren.trapp@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: qla2xxx: Add changes for devloss timeout in driverDarren Trapp
Add support for error recovery within devloss timeout, now that FC-NVMe transport support devloss timeout. Signed-off-by: Darren Trapp <darren.trapp@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: qla2xxx: Set IIDMA and fcport state before qla_nvme_register_remote()Darren Trapp
Signed-off-by: Darren Trapp <darren.trapp@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: qla2xxx: Remove unneeded message and minor cleanup for FC-NVMehimanshu.madhani@cavium.com
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: qla2xxx: Restore ZIO threshold settingDarren Trapp
Signed-off-by: Darren Trapp <darren.trapp@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: devinfo: remove dasd devices from the scsi subsystemXose Vazquez Perez
Only present through ccw bus. [mkp: applied by hand] Cc: Matthias Rudolph <Matthias.Rudolph@hitachivantara.com> Cc: Takahiro Yasui <takahiro.yasui@hitachivantara.com> Cc: Anthony Cheung <anthony.cheung@hpe.com> Cc: Mike Christie <mchristi@redhat.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: s390 ML <linux-s390@vger.kernel.org> Cc: SCSI ML <linux-scsi@vger.kernel.org> Cc: device-mapper development <dm-devel@redhat.com> Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: devinfo: remove DF arrays from HPXose Vazquez Perez
Matthias did confirm that there are no such devices. [mkp: applied by hand] Cc: Matthias Rudolph <Matthias.Rudolph@hitachivantara.com> Cc: Anthony Cheung <anthony.cheung@hpe.com> Cc: Takahiro Yasui <takahiro.yasui@hitachivantara.com> Cc: Mike Christie <mchristi@redhat.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: SCSI ML <linux-scsi@vger.kernel.org> Cc: device-mapper development <dm-devel@redhat.com> Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: devinfo: add HP DISK-SUBSYSTEM device, for HP XP arraysXose Vazquez Perez
"The DISK-SUBSYSTEM is a special model name returned when LUs are not installed. For example, when LU#0 is not installed in "OPEN-" models, LU#0 is detected as the DISK-SUBSYSTEM model": https://marc.info/?l=linux-scsi&m=125424006417825 It's missing for HP XP rebranded arrays, "HP"/"OPEN-". Only the HITACHI one is present: 13f7e5acc8b329080672c13f05f252ace5b79825 627511e3e67553b04f6917c03e39b797df210e04 Cc: Anthony Cheung <anthony.cheung@hpe.com> Cc: Takahiro Yasui <takahiro.yasui@hitachivantara.com> Cc: Matthias Rudolph <Matthias.Rudolph@hitachivantara.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: SCSI ML <linux-scsi@vger.kernel.org> Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: hisi_sas: Remove depends on HAS_DMA in case of platform dependencyGeert Uytterhoeven
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST". In most cases this other symbol is an architecture or platform specific symbol, or PCI. Generic symbols and drivers without platform dependencies keep their dependencies on HAS_DMA, to prevent compiling subsystems or drivers that cannot work anyway. This simplifies the dependencies, and allows to improve compile-testing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Mark Brown <broonie@kernel.org> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: documentation: Obsolete documentation referencesMartin K. Petersen
Remove references to fdomain, ncr53c400a, tmscsim, and DAC960 from Documentation/scsi. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: qla2xxx: fix spelling mistake: "existant" -> "existent"Colin Ian King
Trivial fix to spelling mistake in debug message text Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: dpt_i2o: use after free in __adpt_reset()Dan Carpenter
In __adpt_reset() the problem is that adpt_hba_reset() frees "pHba" on error but we dereference it to print the name in the error message. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-21scsi: dpt_i2o: use after free in adpt_release()Dan Carpenter
The scsi_host_put() function frees "pHba" and then we dereference it on the next line when we do "scsi_host_put(pHba->host);". [mkp: included fix from hch] Fixes: 38e09e3bb056 ("scsi: dpt_i2o: stop using scsi_unregister") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-19scsi: iscsi_tcp: set BDI_CAP_STABLE_WRITES when data digest enabledJianchao Wang
iscsi tcp will first send out data, then calculate and send data digest. If we don't have BDI_CAP_STABLE_WRITES, the page cache will be written in spite of the on going writeback. Consequently, wrong digest will be got and sent to target. To fix this, set BDI_CAP_STABLE_WRITES when data digest is enabled in iscsi_tcp .slave_configure callback. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Acked-by: Chris Leech <cleech@redhat.com> Acked-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-19scsi: sd: Remember that READ CAPACITY(16) succeededMartin K. Petersen
The USB storage glue sets the try_rc_10_first flag in an attempt to avoid wedging poorly implemented legacy USB devices. If the device capacity is too large to be expressed in the provided response buffer field of READ CAPACITY(10), a well-behaved device will set the reported capacity to 0xFFFFFFFF. We will then attempt to issue a READ CAPACITY(16) to obtain the real capacity. Since this part of the discovery logic is not covered by the first_scan flag, a warning will be printed a couple of times times per revalidate attempt if we upgrade from READ CAPACITY(10) to READ CAPACITY(16). Remember that we have successfully issued READ CAPACITY(16) so we can take the fast path on subsequent revalidate attempts. Reported-by: Menion <menion@gmail.com> Reviewed-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-19scsi: remove the old scsi_module.c initialization modelChristoph Hellwig
After more than 15 years all users of this legacy interface are finally gone. Rest in peace! Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-19scsi: remove the sym53c416 driverChristoph Hellwig
This driver hasn't seen any recent bug fixing and is one of the last drivers using the scsi_module.c infrastruture that has been deprecated 15 years ago. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-19scsi: remove the NCR53c406a driverChristoph Hellwig
This driver hasn't seen any recent bug fixing and is one of the last drivers using the scsi_module.c infrastruture that has been deprecated 15 years ago. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-19scsi: remove the fdomain and fdomain_cs driversChristoph Hellwig
These drivers haven't seen any recent bug fixing and are two of the last drivers using the scsi_module.c infrastruture that has been deprecated 15 years ago. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-19scsi: mvme147: stop using scsi_module.cChristoph Hellwig
Convert the driver to modern style probing. Given that there only is a single instance for a given board that can be done using a global struct Scsi_Host instance easily. Also fix the removal path by passing the correct cookie to free_irq, and enable it unconditionally. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-19scsi: esas2r: remove initialization / cleanup dead woodChristoph Hellwig
esas2r has been converted to hotplug style initialization long ago, but kept various remant of the old-style scsi_module.c initialization around. Remove those. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-19scsi: core: unexport scsi_host_set_stateChristoph Hellwig
This function is only used inside the SCSI midlayer, so remove the export for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-15scsi: ibmvfc: Avoid unnecessary port reloginBrian King
Following an RSCN, ibmvfc will issue an ADISC to determine if the underlying target has changed, comparing the SCSI ID, WWPN, and WWNN to determine how to handle the rport in discovery. However, the comparison of the WWPN and WWNN was performing a memcmp between a big endian field against a CPU endian field, which resulted in the wrong answer on LE systems. This was observed as unexpected errors getting logged at boot time as targets were getting relogins when not needed. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-15scsi: csiostor: add support for 32 bit port capabilitiesVarun Prakash
32 bit port capabilities are required to support new speeds which can not be supported using 16 bit port capabilities. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-15scsi: bfa: remove VLAStephen Kitt
In preparation to enabling -Wvla, remove VLAs and replace them with fixed-length arrays instead. bfad_bsg.c uses a variable-length array declaration to measure the size of a putative array; this can be replaced by the product of the size of an element and the number of elements, avoiding the VLA altogether. This was prompted by https://lkml.org/lkml/2018/3/7/621 Signed-off-by: Stephen Kitt <steve@sk2.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-15scsi: aic7xxx: aic79xx: remove VLAsStephen Kitt
In preparation to enabling -Wvla, remove VLAs and replace them with fixed-length arrays instead. The arrays fixed here, using the number of constant sections, aren't really VLAs, but they appear so to the compiler. Replace the array sizes with a pre-processor-level constant instead using ARRAY_SIZE. This was prompted by https://lkml.org/lkml/2018/3/7/621 Signed-off-by: Stephen Kitt <steve@sk2.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-15scsi: scsi_dh_alua: Correct comment for alua_alloc_pg()John Pittman
In the comment for function alua_alloc_pg() the argument '@h' is mistakenly referred to. Fix this by replacing it with the correct argument reference, '@tpgs', and provide a short description. Signed-off-by: John Pittman <jpittman@redhat.com> Reviewed-by Laurence Oberman <loberman@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-15scsi: documentation: remove ChangeLog.1992-1997Christoph Hellwig
This 20+ year old changelog has no useful information for kernel development or users, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-15scsi: aha1740: stop using scsi_unregisterChristoph Hellwig
aha1740 doesn't use scsi_register, so it should not use scsi_unregister either. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-15scsi: ips: don't set .detect and .release in the host templateChristoph Hellwig
Since moving away from using scsi_module.c these were never called. The implementations are called directly, though so they remain. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-15scsi: dpt_i2o: stop using scsi_unregisterChristoph Hellwig
dpt_i2o doesn't use scsi_register, so it should not use scsi_unregister either. Also refactor the module exit path to make a little more sense. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-03-29 10:20:57 +0000