summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-12-06dt-bindings: iio/adc: qcom,spmi-vadc: fix example node namesJohan Hovold
The VADC is a child of an SPMI PMIC, which in turn sits on an SPMI bus. Fixes: 74e903461b17 ("dt-bindings: iio: adc: qcom,spmi-vadc: extend example") Fixes: 5a471662b5d9 ("iio: adc: Convert the QCOM SPMI ADC bindings to .yaml format") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231130171628.12257-6-johan+linaro@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-06dt-bindings: iio/adc: qcom,spmi-rradc: clean up exampleJohan Hovold
Clean up the RRADC example by dropping an unnecessary label and removing stray white space. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231130171628.12257-5-johan+linaro@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-06dt-bindings: iio/adc: qcom,spmi-iadc: clean up exampleJohan Hovold
Clean up the IADC example by adding a newline separator, dropping an unnecessary label and removing stray white space. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231130171628.12257-4-johan+linaro@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-06dt-bindings: iio/adc: qcom,spmi-iadc: fix example node nameJohan Hovold
The IADC is a child of an SPMI PMIC, which in turn sits on an SPMI bus. Fixes: a4e6bf69418c ("dt-bindings:iio:adc:qcom,spmi-iadc: txt to yaml format conversion.") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231130171628.12257-3-johan+linaro@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-06dt-bindings: iio/adc: qcom,spmi-iadc: fix reg descriptionJohan Hovold
The IADC register is just the base address in the SPMI PMIC and does not include any length. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231130171628.12257-2-johan+linaro@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-06iio: light: isl76682: Add ISL76682 driverMarek Vasut
The ISL76682 is very basic ALS which only supports ALS or IR mode in four ranges, 1k/4k/16k/64k LUX. There is no IRQ support or any other fancy functionality. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20231127212726.77707-2-marex@denx.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-04dt-bindings: iio: light: isl76682: Document ISL76682Marek Vasut
The ISL76682 is very basic ALS which only supports ALS or IR mode in four ranges, 1k/4k/16k/64k LUX. There is no IRQ support or any other fancy functionality. Document it as trivial device. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20231127212726.77707-1-marex@denx.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-04iio: light: add VEML6075 UVA and UVB light sensor driverJavier Carrasco
The Vishay VEMl6075 is a low power, 16-bit resolution UVA and UVB light sensor with I2C interface and noise compensation (visible and infrarred). Every UV channel generates an output signal measured in counts per integration period, where the integration time is configurable. This driver adds support for both UV channels and the ultraviolet index (UVI) inferred from them according to the device application note with open-air (no teflon) coefficients. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20231110-veml6075-v3-3-6ee46775b422@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-04dt-bindings: iio: light: add support for Vishay VEML6075Javier Carrasco
The Vishay VEML6075 is a 16-bit digital UVA and UVB sensor with I2C interface. Add bindings and an example for the Vishay VEML6075. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231110-veml6075-v3-2-6ee46775b422@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-04iio: add modifiers for A and B ultraviolet lightJavier Carrasco
Currently there are only two modifiers for ultraviolet light: a generic one for any ultraviolet light (IIO_MOD_LIGHT_UV) and one for deep ultraviolet (IIO_MOD_LIGHT_DUV), which is also referred as ultraviolet C (UV-C) band and covers short-wave ultraviolet. There are still no modifiers for the long-wave and medium-wave ultraviolet bands. These two bands are the main components used to obtain the UV index on the Earth's surface. Add modifiers for the ultraviolet A (UV-A) and ultraviolet B (UV-B) bands. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20231110-veml6075-v3-1-6ee46775b422@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-04iio: proximity: irsd200: Drop unused includeLinus Walleij
The driver includes the legacy GPIO header <linux/gpio.h> but doesn't use any symbols from it. Drop it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Waqar Hameed <waqar.hameed@axis.com> Link: https://lore.kernel.org/r/20231128-descriptors-iio-v1-1-da1e94755db6@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-04dt-bindings: iio/adc: ti,palmas-gpadc: Drop incomplete exampleRob Herring
The example for the TI Palmas ADC is incomplete as the binding is the full PMIC, not just the sub-functions. It is preferred for MFD examples to be complete in the top-level MFD device binding rather than piecemeal in each sub-function binding. This also fixes an undocumented (by schema) compatible warning for '"ti,twl6035-pmic", "ti,palmas-pmic"'. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231128214803.3975542-1-robh@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-04iio: dac: ad5791: Add support for controlling RBUF via devicetreeMichael Hennerich
This patch adds support for an external amplifier to be connected in a gain of two configuration. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20231129-ad5791-michael-stuff-v3-2-48e192b00909@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-04dt-bindings: adi,ad5791: Add support for controlling RBUFMichael Hennerich
Added new property to support an external amplifier to be connected in a gain of two configuration. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20231129-ad5791-michael-stuff-v3-1-48e192b00909@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-04dt-bindings: iio: honeywell,mprls0025pa: drop ref from pressure propertiesKrzysztof Kozlowski
The dtschema treats now properties with '-pascal' suffix as standard one and already defines $ref for them, thus the $ref should be dropped from the bindings. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20231129111041.26782-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-26iio: imu: bmi323: Make the local structures staticJagath Jog J
Make the local structures static within their respective driver files. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311070530.qKhLTz1Y-lkp@intel.com/ Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com> Link: https://lore.kernel.org/r/20231108035831.5889-1-jagathjog1996@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-26iio: light: ltrf216a: Return floating point valuesShreeya Patel
For better precision of input light intesity, return floating point values through sysfs instead of an integer value Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com> Link: https://lore.kernel.org/r/20231107192005.285534-1-shreeya.patel@collabora.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-26iio: imu: inv_mpu6050: return callee's error code rather than -EINVALSu Hui
regmap_bulk_write()/regmap_bulk_read() return zero or negative error code, return the callee's error code is better than '-EINVAL'. Signed-off-by: Su Hui <suhui@nfschina.com> Link: https://lore.kernel.org/r/20231030020752.67630-1-suhui@nfschina.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-26iio: amplifiers: hmc425a: add support for ADRF5740 AttenuatorAna-Maria Cusco
This adds support for the Analog Devices ADRF5740 2 dB LSB, 4-Bit, Silicon Digital Attenuator, 10 MHz to 60 GHz. The default (maximum) gain is also set at probe time, with GPIO lines driven high to achieve maximum gain, in contrast to other devices where GPIOs need to be driven low. Signed-off-by: Ana-Maria Cusco <ana-maria.cusco@analog.com> Link: https://lore.kernel.org/r/20231113102535.51074-2-anamaria.cuscoo@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-26dt-bindings: iio: hmc425a: add entry for ADRF5740 AttenuatorAna-Maria Cusco
The ADRF5740 is a silicon, 4-bit digital attenuator with 22 dB attenuation control range in 2 dB steps. Signed-off-by: Ana-Maria Cusco <ana-maria.cusco@analog.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231113102535.51074-3-anamaria.cuscoo@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-25MAINTAINERS: improve section MICROCHIP MCP3564 ADC DRIVERLukas Bulwahn
Commit 33ec3e5fc1ea ("iio: adc: adding support for MCP3564 ADC") adds a new iio driver and corresponding MAINTAINERS section. It however uses spaces instead of a single tab for all the entries in that MAINTAINERS section. Although, the get_maintainer.pl script handles spaces instead of tabs silently, the MAINTAINERS will quickly get into a messy state with different indentations throughout the file. So, the checkpatch.pl script complains when spaces instead of a single tab are used. Fix this recently added section using tabs instead of spaces. Further, add the driver's ABI documentation file to this section as well. Fixes: 33ec3e5fc1ea ("iio: adc: adding support for MCP3564 ADC") Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Link: https://lore.kernel.org/r/20231122075629.21411-1-lukas.bulwahn@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: buffer: document known issueMatti Vaittinen
Add documentation explaining why the code which scans all available scan masks is checking only a single long worth of bits even though the code was intended to be supporting masks wider than single long. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/ef61c2c1e9a1c5e9f713f656871fdcb1652afdc2.1697452986.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: sanity check available_scan_masks arrayMatti Vaittinen
When IIO goes through the available scan masks in order to select the best suiting one, it will just accept the first listed subset of channels which meets the user's requirements. If driver lists a mask which is a subset of some of the masks previously in the array of avaliable_scan_masks, then the latter one will never be selected. Add a warning if driver registers masks which can't be used due to the available_scan_masks-array ordering. Suggested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/e55ef0b26a6d3b323bab24920c131c79a01ba08e.1697452986.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16dt-bindings: adis16460: Add 'spi-cs-inactive-delay-ns' propertyRamona Gradinariu
The adis16460 device requires a stall time between SPI transactions (during which the chip select is inactive), with a minimum value equal to 16 microseconds. This commit adds 'spi-cs-inactive-delay-ns' property, which should indicate the stall time between consecutive SPI transactions. The specified minimum time may not be sufficient for all configurations. Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231027140358.328699-4-ramona.gradinariu@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16dt-bindings: adis16475: Add 'spi-cs-inactive-delay-ns' propertyRamona Gradinariu
The devices supported by adis16475 driver require a stall period between SPI transactions (during which the chip select is inactive), with a minimum value equal to 16 microseconds, thus adding 'spi-cs-inactive-delay-ns' property, which should indicate the stall time between consecutive SPI transactions. The specified minimum time may not be sufficient for all configurations. Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231027140358.328699-3-ramona.gradinariu@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: imu: adis: Use spi cs inactive delayRamona Gradinariu
A delay is needed each time the chip selected becomes inactive, even after burst data readings are performed. Currently, there is no delay added after a burst reading and in case a new SPI transfer is performed before the needed delay, the adis device becomes unresponsive until reset. This commit is adding the needed delay directly to the spi driver, using the cs_inactive parameter, in case it is not set and is removing the additional chip select change delay present in adis APIs to remove the double delay. Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com> Link: https://lore.kernel.org/r/20231027140358.328699-2-ramona.gradinariu@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio/imu: inv_icm42600: Use max() helper macrosBragatheswaran Manickavel
Use the standard max() helper macros instead of direct variable comparison using if/else blocks or ternary operator. Change identified using minmax.cocci Coccinelle semantic patch. Signed-off-by: Bragatheswaran Manickavel <bragathemanick0908@gmail.com> Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://lore.kernel.org/r/20231027094410.3706-1-bragathemanick0908@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: temperature: Add MCP9600 thermocouple EMF converterAndrew Hepp
Add support for the MCP9600 thermocouple electromotive force converter. The sensor has integrated cold junction compensation and a typical accuracy of 0.5 degrees Celsius. The driver supports a resolution of 0.0625 degrees Celsius. Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/MCP960X-Data-Sheet-20005426.pdf Signed-off-by: Andrew Hepp <andrew.hepp@ahepp.dev> Link: https://lore.kernel.org/r/20231025233153.5454-2-andrew.hepp@ahepp.dev Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16dt-bindings: iio: Add MCP9600 thermocouple EMF converterAndrew Hepp
Add support for the MCP9600 thermocouple electromotive force converter. The sensor has integrated cold junction compensation and a typical accuracy of 0.5 degrees Celsius. The driver supports a resolution of 0.0625 degrees Celsius. Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/MCP960X-Data-Sheet-20005426.pdf Signed-off-by: Andrew Hepp <andrew.hepp@ahepp.dev> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231025233153.5454-1-andrew.hepp@ahepp.dev Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: imu: Fix spelling mistake "accelrometer" -> "accelerometer"Colin Ian King
There are two spelling mistakes in dev_err messages. Fix them. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Jagath Jog J <jagathjog1996@gmail.com> Link: https://lore.kernel.org/r/20231023081054.617292-1-colin.i.king@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: pressure: bmp280: Add support for BMP390Angel Iglesias
Add BMP390 device ID to the supported IDs on bmp380 sensor family Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> Link: https://lore.kernel.org/r/d6a9e9ca4670c7401545d0d086cd3059e29044c8.1697994521.git.ang.iglesiasg@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: pressure: bmp280: Allow multiple chips id per family of devicesAngel Iglesias
Improve device detection in certain chip families known to have various chip IDs. When no ID matches, give a warning but follow along what device said on the firmware side and try to configure it. Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> Link: https://lore.kernel.org/r/eade22d11e9de4405ea19fdaa5a8249143ae94df.1697994521.git.ang.iglesiasg@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: pressure: bmp280: Rearrange vars in reverse xmas tree orderAngel Iglesias
Small cleanup reordering local variable declarations following reverse christmas tree convention. Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/bb63a996eb9c4555bf83471770f0169d2627e79c.1697994521.git.ang.iglesiasg@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: pressure: bmp280: Use spi_get_device_match_data()Angel Iglesias
Use the spi_get_device_match_data() helper instead of device_get_match_data() and the fallback match_id logic. Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/9ea8ac90b2b8a8cf45803d0435243c0bee009b37.1697994521.git.ang.iglesiasg@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: pressure: bmp280: Use i2c_get_match_data()Biju Das
Replace device_get_match_data() and id lookup for retrieving match data by i2c_get_match_data(). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/0554ddae62ba04ccacf58c2de04ec598c876665e.1697994521.git.ang.iglesiasg@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16MAINTAINERS: correct file entry in BOSCH SENSORTEC BMI323 IMU IIO DRIVERLukas Bulwahn
Commit b512c767e7bc ("iio: imu: Add driver for BMI323 IMU") adds the MAINTAINERS section BOSCH SENSORTEC BMI323 IMU IIO DRIVER and refers to a non-existing device-tree file. Probably, this mistake was introduced by copying from the BOSCH SENSORTEC BMA400 ACCELEROMETER IIO DRIVER section and missing to adjust the file entry properly. This is however easily caught, as the script ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. The related commit 77583938740e ("dt-bindings: iio: imu: Add Bosch BMI323") adds bosch,bmi323.yaml, so refer to that intended file instead. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: Jagath Jog J <jagathjog1996@gmail.com> Link: https://lore.kernel.org/r/20231025091550.21052-1-lukas.bulwahn@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16MAINTAINERS: correct file entry IIO LIGHT SENSOR GAIN-TIME_SCALE HELPERSAmit Dhingra
Commit ca11e4a35154 ("MAINTAINERS: Add IIO gain-time-scale helpers"), updates the MAINTAINERS file. However the files listed do not exist. These presumably come from commit 38416c28e168 ("iio: light: Add gain-time-scale helpers") Fix the entries. Found by ./scripts/get_maintainer.pl --self-test=patterns Fixes: ca11e4a35154 ("MAINTAINERS: Add IIO gain-time-scale helpers") Signed-off-by: Amit Dhingra <mechanicalamit@gmail.com> Acked-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/CAO=gReFVhp7QK_XZRBO5vbv6fmFb4BdsZeQPSzWvuiz9UeQekA@mail.gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: bu27008: Add illuminance channelMatti Vaittinen
The RGB + IR data can be used to calculate the illuminance value (luxes). Implement the equation obtained from the ROHM HW colleagues and add a raw light data channel outputting illuminance values in (nano) Luxes. Both the read_raw and buffering values are supported, with the limitation that buffering is only allowed when a suitable scan-mask is used. (RGB+IR, no clear). The equation has been developed by ROHM HW colleagues for open air sensor. Adding any lens to the sensor is likely to impact to used c1, c2, c3 coefficients. Also, the output values have only been tested on BU27008. According to the HW colleagues, the very same equation should work on BU27010 as well. Calculate and output illuminance values from BU27008 and BU27010. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/ZTJcOxSb/WHzdN8h@dc78bmyyyyyyyyyyyyydt-3.rev.dnainternet.fi Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: pressure: fix some word spelling errorsLi peiyu
They are appear to be spelling mistakes, drivers/iio/pressure/bmp280.h:413 endianess->endianness drivers/iio/pressure/bmp280-core.c:923 dregrees->degrees drivers/iio/pressure/bmp280-core.c:1388 reescale->rescale drivers/iio/pressure/bmp280-core.c:1415 reescale->rescale Signed-off-by: Li peiyu <579lpy@gmail.com> Link: https://lore.kernel.org/r/20231021070903.6051-1-579lpy@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16mailmap: Change email mapping from previous employersMatt Ranostay
Signed-off-by: Matt Ranostay <matt@ranostay.sg> Link: https://lore.kernel.org/r/20231021085250.21431-1-matt@ranostay.sg Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: proximity: sx9324: Switch to device_property_match_property_string()Andy Shevchenko
Replace open coded device_property_match_property_string(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230808162800.61651-7-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: magnetometer: tmag5273: Switch to device_property_match_property_string()Andy Shevchenko
Replace open coded device_property_match_property_string(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230808162800.61651-6-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: frequency: admv1014: Switch to device_property_match_property_string()Andy Shevchenko
Replace open coded device_property_match_property_string(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230808162800.61651-5-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: frequency: adf4377: Switch to device_property_match_property_string()Andy Shevchenko
Replace open coded device_property_match_property_string(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230808162800.61651-4-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16device property: Add fwnode_property_match_property_string()Andy Shevchenko
Sometimes the users want to match the single value string property against an array of predefined strings. Create a helper for them. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20230808162800.61651-3-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16device property: Use fwnode_property_string_array_count()Andy Shevchenko
Use fwnode_property_string_array_count() instead of open coded variant. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20230808162800.61651-2-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: resolver: ad2s1210: add reset gpio supportDavid Lechner
This adds support for the optional reset gpio to the ad2s1210 resolver driver. If the gpio is present in the device tree, it is toggled during driver probe before the reset of the device initialization. As per the devicetree bindings, it is expected for the gpio to configured as active low. Suggested-by: Michael Hennerich <Michael.Hennerich@analog.com> Signed-off-by: David Lechner <dlechner@baylibre.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Link: https://lore.kernel.org/r/20231016154311.38547-1-dlechner@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: resolver: ad2s1210: add support for adi,fixed-modeDavid Lechner
It is possible to use the AD2S1210 with hardwired mode pins (A0 and A1). According to the devicetree bindings, in this case the adi,fixed-mode property will specify which of the 3 possible modes the mode pins are hardwired for and the gpio-modes property is not allowed. This adds support for the case where the mode pins are hardwired for config mode. In this configuration, the position and value must be read from the config register. The case of hardwired position or velocity mode is not supported as there would be no way to configure the device. Signed-off-by: David Lechner <dlechner@baylibre.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20231016135423.16808-1-dlechner@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16iio: imu: Add driver for BMI323 IMUJagath Jog J
The Bosch BMI323 is a 6-axis low-power IMU that provide measurements for acceleration, angular rate, and temperature. This sensor includes motion-triggered interrupt features, such as a step counter, tap detection, and activity/inactivity interrupt capabilities. The driver supports various functionalities, including data ready, FIFO data handling, and events such as tap detection, step counting, and activity interrupts. Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com> Link: https://lore.kernel.org/r/20231013034808.8948-3-jagathjog1996@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-11-16dt-bindings: iio: imu: Add Bosch BMI323Jagath Jog J
Add devicetree description document for Bosch BMI323, a 6-Axis IMU. Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231013034808.8948-2-jagathjog1996@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit (git 2.34.1) at 2025-04-28 13:33:57 +0000