summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-11ARM: dts: exynos: move assigned-clock* properties to i2s0 node in Odroid XU4Krzysztof Kozlowski
The purpose of those assigned-clock-* properties is to configure clock for the I2S device so move them to respective node. This silences the dtschema warnings like: 'clocks' is a dependency of 'assigned-clocks' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200906142146.21266-3-krzk@kernel.org
2020-09-11ARM: dts: exynos: add input clock to CMU in Exynos4412 OdroidKrzysztof Kozlowski
Commit 68605101460e ("ARM: dts: exynos: Add support for audio over HDMI for Odroid X/X2/U3") added assigned clocks under Clock Management Unit. However the dtschema expects "clocks" property if "assigned-clocks" are used. Add reference to input clock to silence the dtschema warnings: arch/arm/boot/dts/exynos4412-odroidu3.dt.yaml: clock-controller@10030000: 'clocks' is a dependency of 'assigned-clocks' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200906142146.21266-2-krzk@kernel.org
2020-09-11ARM: dts: exynos: add input clock to CMU in Exynos3250Krzysztof Kozlowski
Commit 52005dece527 ("ARM: dts: Add assigned clock parents to CMU node for exynos3250") added assigned clocks under Clock Management Unit to fix hangs when accessing ISP registers. However the dtschema expects "clocks" property if "assigned-clocks" are used. Add reference to input clock to silence the dtschema warnings: arch/arm/boot/dts/exynos3250-artik5-eval.dt.yaml: clock-controller@10030000: 'clocks' is a dependency of 'assigned-clocks' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200906142146.21266-1-krzk@kernel.org
2020-09-11ARM: dts: s3c24xx: move fixed clocks under root node in SMDK2416Krzysztof Kozlowski
The fixed clocks are kept under dedicated 'clocks' node but this causes multiple dtschema warnings: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' clocks: #size-cells:0:0: 0 is not one of [1, 2] clocks: xti@0:reg:0: [0] is too short clocks: 'ranges' is a required property xti@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-12-krzk@kernel.org
2020-09-11ARM: dts: s3c24xx: add address to CPU nodeKrzysztof Kozlowski
The CPU nodes should be described as children of "cpus" bus node with appropriate "reg" properties: cpus: '#address-cells' is a required property cpus: '#size-cells' is a required property cpu: 'device_type' is a required property cpu: 'reg' is a required property Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-11-krzk@kernel.org
2020-09-11ARM: dts: s3c24xx: align PWM/timer node name with dtschemaKrzysztof Kozlowski
Although PWM is used on S3C24xx as clocksource/timer, the dtschema expects the node to be named in certain format: timer@51000000: $nodename:0: 'timer@51000000' does not match '^pwm(@.*|-[0-9a-f])*$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-10-krzk@kernel.org
2020-09-11ARM: dts: s3c24xx: override nodes by labelKrzysztof Kozlowski
Using full paths to extend or override a device tree node is error prone. If there was a typo error, a new node will be created instead of extending the existing node. This will lead to run-time errors that could be hard to detect. A mistyped label on the other hand, will cause a dtc compile error (during build time). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-9-krzk@kernel.org
2020-09-11ARM: dts: s3c24xx: fix number of PWM cellsKrzysztof Kozlowski
The PWM has only three cells, not four, as pointed out by dtschema: timer@51000000: #pwm-cells:0:0: 3 was expected Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-8-krzk@kernel.org
2020-09-11ARM: dts: s3c6410: remove additional CPU compatibleKrzysztof Kozlowski
Only the specific compatible (arm,arm1176jzf-s) is allowed by dtschema: cpu@0: compatible: ['arm,arm1176jzf-s', 'arm,arm1176'] is too long cpu@0: compatible: Additional items are not allowed ('arm,arm1176' was unexpected) Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-7-krzk@kernel.org
2020-09-11ARM: dts: s3c6410: align node SROM bus node name with dtschema in SMDK6410Krzysztof Kozlowski
The SROM controller is modeled with a bus so align the device node name with dtschema to fix warning: srom-cs1@18000000: $nodename:0: 'srom-cs1@18000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-6-krzk@kernel.org
2020-09-11ARM: dts: s3c6410: align node SROM bus node name with dtschema in Mini6410Krzysztof Kozlowski
The SROM controller is modeled with a bus so align the device node name with dtschema to fix warning: srom-cs1@18000000: $nodename:0: 'srom-cs1@18000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-5-krzk@kernel.org
2020-09-11ARM: dts: s3c6410: move fixed clocks under root node in SMDK6410Krzysztof Kozlowski
The fixed clocks are kept under dedicated 'clocks' node but this causes multiple dtschema warnings: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' clocks: #size-cells:0:0: 0 is not one of [1, 2] clocks: oscillator@0:reg:0: [0] is too short clocks: oscillator@1:reg:0: [1] is too short clocks: 'ranges' is a required property oscillator@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-4-krzk@kernel.org
2020-09-11ARM: dts: s3c6410: move fixed clocks under root node in Mini6410Krzysztof Kozlowski
The fixed clocks are kept under dedicated 'clocks' node but this causes multiple dtschema warnings: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' clocks: #size-cells:0:0: 0 is not one of [1, 2] clocks: oscillator@0:reg:0: [0] is too short clocks: oscillator@1:reg:0: [1] is too short clocks: 'ranges' is a required property oscillator@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-3-krzk@kernel.org
2020-09-11ARM: dts: s5pv210: correct ethernet unit address in SMDKV210Krzysztof Kozlowski
The SROM bank 5 is at address 0xa8000000, just like the one put in "reg" property of ethernet node. Fix the unit address of ethernet node. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907183313.29234-2-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: align SPI GPIO node name with dtschema in AriesKrzysztof Kozlowski
The device tree schema expects SPI controller to be named "spi", otherwise dtbs_check complain with a warning like: spi-gpio-0: $nodename:0: 'spi-gpio-0' does not match '^spi(@.*|-[0-9a-f])*$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Jonathan Bakker <xc-racer2@live.ca> Link: https://lore.kernel.org/r/20200907161141.31034-25-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: use defines for IRQ flags in GoniKrzysztof Kozlowski
Replace hard-coded flags with defines for readability. No functional change. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907161141.31034-20-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: use defines for IRQ flags in SMDKV210Krzysztof Kozlowski
Replace hard-coded flags with defines for readability. No functional change. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907161141.31034-19-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: use defines for GPIO flags in GoniKrzysztof Kozlowski
Replace hard-coded flags with defines for readability. No functional change. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907161141.31034-18-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: use defines for GPIO flags in AquilaKrzysztof Kozlowski
Replace hard-coded flags with defines for readability. No functional change. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907161141.31034-17-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: add RTC 32 KHz clock in TorbreckKrzysztof Kozlowski
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC. However the PMIC is not described in DTS at all so at least add a workaround to model its clock with a fixed-clock. This fixes dtbs_check warnings: rtc@e2800000: clocks: [[2, 145]] is too short rtc@e2800000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907161141.31034-16-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: add RTC 32 KHz clock in SMDKV210Krzysztof Kozlowski
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC. However the PMIC is not described in DTS at all so at least add a workaround to model its clock with a fixed-clock. This fixes dtbs_check warnings: rtc@e2800000: clocks: [[2, 145]] is too short rtc@e2800000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907161141.31034-15-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: add RTC 32 KHz clock in SMDKC110Krzysztof Kozlowski
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC. However the PMIC is not described in DTS at all so at least add a workaround to model its clock with a fixed-clock. This fixes dtbs_check warnings: rtc@e2800000: clocks: [[2, 145]] is too short rtc@e2800000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907161141.31034-14-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: add RTC 32 KHz clock in GoniKrzysztof Kozlowski
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC. However there is no such clock provider but rather a regulator driver which registers the clock as a regulator. This is an old driver which will not be updated so add a workaround - a fixed-clock to fill missing clock phandle reference in S3C RTC. This fixes dtbs_check warnings: rtc@e2800000: clocks: [[2, 145]] is too short rtc@e2800000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907161141.31034-13-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: add RTC 32 KHz clock in Aries familyKrzysztof Kozlowski
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC. However there is no such clock provider but rather a regulator driver which registers the clock as a regulator. This is an old driver which will not be updated so add a workaround - a fixed-clock to fill missing clock phandle reference in S3C RTC. This fixes dtbs_check warnings: rtc@e2800000: clocks: [[2, 145]] is too short rtc@e2800000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Jonathan Bakker <xc-racer2@live.ca> Link: https://lore.kernel.org/r/20200907161141.31034-12-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: add RTC 32 KHz clock in AquillaKrzysztof Kozlowski
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC. However there is no such clock provider but rather a regulator driver which registers the clock as a regulator. This is an old driver which will not be updated so add a workaround - a fixed-clock to fill missing clock phandle reference in S3C RTC. This fixes dtbs_check warnings: rtc@e2800000: clocks: [[2, 145]] is too short rtc@e2800000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907161141.31034-11-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: remove dedicated 'audio-subsystem' nodeKrzysztof Kozlowski
The 'audio-subsystem' node is an artificial creation, not representing real hardware. The hardware is described by its nodes - AUDSS clock controller and I2S0. Remove the 'audio-subsystem' node along with its undocumented compatible to fix dtbs_check warnings like: audio-subsystem: $nodename:0: 'audio-subsystem' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Jonathan Bakker <xc-racer2@live.ca> Link: https://lore.kernel.org/r/20200907161141.31034-9-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: move PMU node out of clock controllerKrzysztof Kozlowski
The Power Management Unit (PMU) is a separate device which has little common with clock controller. Moving it to one level up (from clock controller child to SoC) allows to remove fake simple-bus compatible and dtbs_check warnings like: clock-controller@e0100000: $nodename:0: 'clock-controller@e0100000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Jonathan Bakker <xc-racer2@live.ca> Link: https://lore.kernel.org/r/20200907161141.31034-8-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: move fixed clocks under root nodeKrzysztof Kozlowski
The fixed clocks are kept under dedicated 'external-clocks' node, thus a fake 'reg' was added. This is not correct with dtschema as fixed-clock binding does not have a 'reg' property. Moving fixed clocks out of 'soc' to root node fixes multiple dtbs_check warnings: external-clocks: $nodename:0: 'external-clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' external-clocks: #size-cells:0:0: 0 is not one of [1, 2] external-clocks: oscillator@0:reg:0: [0] is too short external-clocks: oscillator@1:reg:0: [1] is too short external-clocks: 'ranges' is a required property oscillator@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Jonathan Bakker <xc-racer2@live.ca> Link: https://lore.kernel.org/r/20200907161141.31034-7-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: remove DMA controller bus node name to fix dtschema warningsKrzysztof Kozlowski
There is no need to keep DMA controller nodes under AMBA bus node. Remove the "amba" node to fix dtschema warnings like: amba: $nodename:0: 'amba' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Jonathan Bakker <xc-racer2@live.ca> Link: https://lore.kernel.org/r/20200907161141.31034-6-krzk@kernel.org
2020-09-09ARM: dts: s5pv210: fix pinctrl property of "vibrator-en" regulator in AriesKrzysztof Kozlowski
Fix typo in pinctrl property of "vibrator-en" fixed regulator in Aries family of boards. The error caused lack of pin configuration for the GPIO used in vibrator. Fixes: 04568cb58a43 ("ARM: dts: s5pv210: Disable pull for vibrator enable GPIO on Aries boards") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200907161141.31034-5-krzk@kernel.org
2020-09-09dt-bindings: samsung: pmu: document S5Pv210Krzysztof Kozlowski
Add compatible for the Samsung S5Pv210 SoC PMU. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907161141.31034-2-krzk@kernel.org
2020-09-06ARM: dts: exynos: Silence SATA PHY warning in Exynos5250Krzysztof Kozlowski
The SATA PHY in Exynos5250 SoCs has two interfaces and two device nodes: 1. sata-phy@12170000 2. i2c-9/i2c@38 The first node represents the actual SATA PHY device with phy-cells. The second represents an additional I2C interface, needed by the driver to communicate with the SATA PHY device. It is not a PHY-provider in the terms of dtschema so rename it to silence dtbs_check warning: arch/arm/boot/dts/exynos5250-arndale.dt.yaml: sata-phy@38: '#phy-cells' is a required property From schema: lib/python3.6/site-packages/dtschema/schemas/phy/phy-provider.yaml This second device node is also a property of SoC, not a board so move it there. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200902155733.20271-2-krzk@kernel.org
2020-09-06ARM: dts: exynos: Remove I2C9 samsung, i2c-slave-addr from Exynos5250 boardsKrzysztof Kozlowski
The property samsung,i2c-slave-addr in I2C9 controller on Exynos5250 Arndale and SMDK5250 boards, is not actually needed. There is only one master on this bus. It's not clear why this property was added at first place. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200902155733.20271-1-krzk@kernel.org
2020-09-06ARM: dts: samsung: odroid-xu3: Move assigned-clock* properties to i2s0 nodeSylwester Nawrocki
The purpose of those assigned-clock-* properties is to configure clock for for the I2S device so move them to respective node. This suppresses the dtbs_check warning: arch/arm/boot/dts/exynos5422-odroidxu3.dt.yaml: sound: 'clocks' is a dependency of 'assigned-clocks' Reported-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-09-04ARM: dts: exynos: Use S2MPS11 clock in S3C RTC in SMDK5420Krzysztof Kozlowski
Use the 32 kHz clock from S2MPS11 PMIC in the S3C RTC node. Except making the S3C RTC working, this also fixes dtbs_check warnings: arch/arm/boot/dts/exynos5420-smdk5420.dt.yaml: rtc@101e0000: clocks: [[2, 317]] is too short arch/arm/boot/dts/exynos5420-smdk5420.dt.yaml: rtc@101e0000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200901075417.22481-14-krzk@kernel.org
2020-09-03ARM: dts: exynos: Silence DP HPD pinctrl dtschema warning in Exynos5250 SpringKrzysztof Kozlowski
The pin configuration of Display Port HPD GPIO emds with '-gpio' which confuses dtschema: arch/arm/boot/dts/exynos5250-spring.dt.yaml: pinctrl@11400000: dp-hpd-gpio: {'samsung,pins': ['gpc3-0'], ... 'samsung,pin-drv': [[0]], 'phandle': [[23]]} is not of type 'array' From schema: lib/python3.6/site-packages/dtschema/schemas/gpio/gpio-consumer.yaml Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200901075417.22481-11-krzk@kernel.org
2020-09-03ARM: dts: exynos: Use S5M8767 clock in S3C RTC in Exynos5250 SpringKrzysztof Kozlowski
Use the 32 kHz clock from S5M8767 PMIC in the S3C RTC node. Except making the S3C RTC working, this also fixes dtbs_check warnings: arch/arm/boot/dts/exynos5250-spring.dt.yaml: rtc@101e0000: clocks: [[2, 337]] is too short arch/arm/boot/dts/exynos5250-spring.dt.yaml: rtc@101e0000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200901075417.22481-10-krzk@kernel.org
2020-09-03ARM: dts: exynos: Add max77686 clocks for S3C RTC in SMDK5250Krzysztof Kozlowski
Add clock-cells to max77686 PMIC node so its 32 kHz clocks could be used later in the S3C RTC node. Except making the S3C RTC working, this also fixes dtbs_check warnings: arch/arm/boot/dts/exynos5250-smdk5250.dt.yaml: rtc@101e0000: clocks: [[2, 337]] is too short arch/arm/boot/dts/exynos5250-smdk5250.dt.yaml: rtc@101e0000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200901075417.22481-9-krzk@kernel.org
2020-09-03ARM: dts: exynos: Override thermal by label in Exynos5250Krzysztof Kozlowski
Using full paths to extend or override a device tree node is error prone since if there was a typo error, a new node will be created instead of extending the node as it was desired. This will lead to run-time errors that could be hard to detect. A mistyped label on the other hand, will cause a dtc compile error (during build time). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200901075417.22481-8-krzk@kernel.org
2020-09-03ARM: dts: exynos: Correct whitespace and indentation issues in Exynos5Krzysztof Kozlowski
Remove double space after '=' and fix indentation in Exynos5250, Exynos5410 and Exynos5420 DTS files. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200901075417.22481-7-krzk@kernel.org
2020-09-03ARM: dts: exynos: Silence i2c-gpio dtschema warning in Exynos5250 ArndaleKrzysztof Kozlowski
The name of I2C controller over GPIO lines node ends with '-gpio' which confuses dtschema: arch/arm/boot/dts/exynos5250-arndale.dt.yaml: soc: i2c-gpio: {'pinctrl-names': ['default'], ... 'phandle': [[65]]} is not of type 'array' From schema: lib/python3.6/site-packages/dtschema/schemas/gpio/gpio-consumer.yaml Add a '-10' (there are already 0-9 I2C controllers on the SoC) suffix to silence it. This pattern on naming i2c-gpio is already present in many other dts. No functional change. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200901075417.22481-6-krzk@kernel.org
2020-09-03ARM: dts: exynos: Correct S3C RTC bindings in SMDK5410Krzysztof Kozlowski
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC. However the PMIC is not described in DTS at all so at least add a workaround to model its clock with a fixed-clock. This fixes S3C RTC and silences dtbs_check warnings like: arch/arm/boot/dts/exynos5410-smdk5410.dt.yaml: rtc@101e0000: clocks: [[5, 317]] is too short arch/arm/boot/dts/exynos5410-smdk5410.dt.yaml: rtc@101e0000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200901075417.22481-5-krzk@kernel.org
2020-09-03ARM: dts: exynos: Remove unneeded address/size cells in Exynos5260 GICKrzysztof Kozlowski
The Exynos5260 GIC node does not have any children so remove the address and size cells as they are not needed by DT bindings. The size-cells of '0' were also incorrect. This fixes dtbs_check warning: arch/arm/boot/dts/exynos5260-xyref5260.dt.yaml: interrupt-controller@10481000: #size-cells:0:0: 1 was expected Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200901075417.22481-4-krzk@kernel.org
2020-09-03ARM: dts: exynos: Correct compatible for Exynos5260 GICKrzysztof Kozlowski
Exynos5260 SoCs have ARM GIC 400. Correct the compatibles to match dtschema and fix the dtbs_check warnings like: arch/arm/boot/dts/exynos5260-xyref5260.dt.yaml: interrupt-controller@10481000: compatible: ['arm,cortex-a15-gic', 'arm,cortex-a9-gic'] is not valid under any of the given schemas Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200901075417.22481-3-krzk@kernel.org
2020-09-03ARM: dts: exynos: Correct compatible for Exynos5 GICKrzysztof Kozlowski
Exynos5250 and Exynso54xx SoCs have ARM GIC 400. Correct the compatibles to match dtschema and fix the dtbs_check warnings like: arch/arm/boot/dts/exynos5420-peach-pit.dt.yaml: interrupt-controller@10481000: compatible: ['arm,gic-400', 'arm,cortex-a15-gic', 'arm,cortex-a9-gic'] is not valid under any of the given schemas Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200901075417.22481-2-krzk@kernel.org
2020-09-02ARM: dts: s5pv210: Enable audio on Aries boardsJonathan Bakker
Both the Galaxy S and the Fascinate4G have a WM8994 codec, but they differ slightly in their jack detection and micbias configuration. Signed-off-by: Jonathan Bakker <xc-racer2@live.ca> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-09-02ARM: dts: exynos: Correct whitespace and indentation issuesKrzysztof Kozlowski
Remove double space after '=' and fix indentation in Exynos3250, Exynos4210 and Exynos4412 boards. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200830135200.24304-33-krzk@kernel.org
2020-09-02ARM: dts: exynos: Correct S3C RTC bindings in Tiny4412Krzysztof Kozlowski
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC. However the PMIC is not described in DTS at all so at least add a workaround to model its clock with fixed-clock. This fixes S3C RTC and silences dtbs_check warnings like: arch/arm/boot/dts/exynos4412-tiny4412.dt.yaml: rtc@10070000: clocks: [[7, 346]] is too short arch/arm/boot/dts/exynos4412-tiny4412.dt.yaml: rtc@10070000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200830135200.24304-32-krzk@kernel.org
2020-09-02ARM: dts: exynos: Correct S3C RTC bindings in SMDK4412Krzysztof Kozlowski
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC. However the PMIC is not described in DTS at all so at least add a workaround to model its clock with fixed-clock and silence dtbs_check warnings like: arch/arm/boot/dts/exynos4412-smdk4412.dt.yaml: rtc@10070000: clocks: [[7, 346]] is too short arch/arm/boot/dts/exynos4412-smdk4412.dt.yaml: rtc@10070000: clock-names: ['rtc'] is too short Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200830135200.24304-31-krzk@kernel.org
2020-09-02ARM: dts: exynos: Add CPU cooling in Tiny4412Krzysztof Kozlowski
Add missing cooling devices for CPU thermal zones in Exynos4412 Tiny4412 board. This allows to scale down CPU frequency (and voltage) in case of thermal pressure. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200830135200.24304-30-krzk@kernel.org
generated by cgit (git 2.34.1) at 2025-05-31 03:44:56 +0000