summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-04-21mt76: connac: unschedule ps_work in mt76_connac_pm_wakeLorenzo Bianconi
In order to avoid synchronization issues between wake and ps works, cancel ps_work in mt76_connac_pm_wake routine Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7663: rely on mt76_connac_pm_ref/mt76_connac_pm_unref in tx/rx napiLorenzo Bianconi
Introduce mt7615_poll_rx rx napi callback for mt7663. Do not access device registers in tx/rx napi if the device is not awake. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: rely on mt76_connac_pm_ref/mt76_connac_pm_unref in tx/rx napiLorenzo Bianconi
Introduce mt7921_poll_rx rx napi callback for mt7921. Do not access device registers in tx/rx napi if the device is not awake. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: dma: add the capability to define a custom rx napi poll routineLorenzo Bianconi
Add the capability to define a custom rx napi callback for each driver. This is a preliminary patch to properly support runtime-pm on rx side Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7663: rely on mt76_connac_pm_ref/mt76_connac_pm_unref in tx pathLorenzo Bianconi
Introduce mt7615_tx_worker routine as mt76 tx worker callback for mt7663. Rely on mt76_connac_pm_ref/mt76_connac_pm_unref to check PM state and increment/decrement wake counter Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: rely on mt76_connac_pm_ref/mt76_connac_pm_unref in tx pathLorenzo Bianconi
Introduce mt7921_tx_worker routine as mt76 tx worker callback for mt7921. Rely on mt76_connac_pm_ref/mt76_connac_pm_unref to check PM state and increment/decrement wake counter Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: connac: introduce wake counter for fw_pmctrl synchronizationLorenzo Bianconi
Introduce wake counter and related spinlock in order to synchronize tx/rx path and fw_pmctrl request. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7663: fix a race between mt7615_mcu_drv_pmctrl and mt7615_mcu_fw_pmctrlLorenzo Bianconi
Introduce a mutex in order to avoid a race between mt7615_mcu_lp_drv_pmctrl and mt7615_mcu_fw_pmctrl routines since they are run two independent works Fixes: 1f549009b5b2 ("mt76: mt7615: do not request {driver,fw}_own if already granted") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: fix a race between mt7921_mcu_drv_pmctrl and mt7921_mcu_fw_pmctrlLorenzo Bianconi
Introduce a mutex in order to avoid a race between mt7921_mcu_drv_pmctrl and mt7921_mcu_fw_pmctrl routines since they are run two independent works Fixes: 1d8efc741df8 ("mt76: mt7921: introduce Runtime PM support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: remove leftover function declarationLorenzo Bianconi
Get rid of leftover mt7921_mcu_add_bss_info routine declaration Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: connac: move mcu_update_arp_filter in mt76_connac moduleLorenzo Bianconi
Move mt76_connac_mcu_update_arp_filter in mt76_connac module since the code is shared between mt7615 and mt7921 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: do not use 0 as NULL pointerLorenzo Bianconi
Fix the following sparse warning: drivers/net/wireless/mediatek/mt76/mt7921/mac.c:1425:70: warning: Using plain integer as NULL pointer Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7915: directly read per-rate tx power from registersShayne Chen
Since driver no longer handler per-rate tx power setting, we need to read the power values directly from registers. Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7915: rework the flow of txpower settingShayne Chen
Clean up the flow of per-rate txpower limit setting to get rid of duplicate work since it has already been handled by firmware, and set proper max_power based on different channels and regdomains. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7915: add support for DT rate power limitsShayne Chen
Enable to limit per-rate max txpower from DT. Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: abort uncompleted scan by wifi resetSean Wang
Scan abort should be required for the uncompleted hardware scan interrupted by wifi reset. Otherwise, it is possible that the scan request after wifi reset gets error code -EBUSY from mac80211 and then blocks the reconnectting to the access point. Fixes: 0c1ce9884607 ("mt76: mt7921: add wifi reset support") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: add wifisys reset support in debugfsSean Wang
Introduce chip_reset knob in mt7921 debugfs to export a way to users able to trigger wifi reset, and group the similar operations previously defined in chip_config in the same knob. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: run mt7921_mcu_fw_log_2_host holding mt76 mutexLorenzo Bianconi
Wake the chip before configuring the mcu log level Fixes: 1d8efc741df8 ("mt76: mt7921: introduce Runtime PM support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: improve mcu error loggingLorenzo Bianconi
Dump mcu command code in hex and related prefix to help debugging Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: move hw configuration in mt7921_register_deviceLorenzo Bianconi
Get rid of init work since firmware loading is already performed in mt7921_init_hardware Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7915: add support for applying pre-calibration dataRyder Lee
When the EEPROM data is read from flash, it can contain pre-calibration data, which can save calibration time. Note that group_cal can save 30% bootup calibration time, and dpd_cal can save 75% channel switching time. Tested-by: Bo Jiao <bo.jiao@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7615: load ROM patch before checking patch semaphore statusFelix Fietkau
For MT7663, the availability of the patch files is used to detect, which corresponding firmware is going to be used (AP firmware or STA offload firmware). If the ROM patch was already applied, it could attempt to load the wrong firmware (without considering the alternative). Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7615: fix entering driver-own state on mt7663Felix Fietkau
Fixes hardware wakeup issues Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7615: fix hardware error recovery for mt7663Felix Fietkau
MT7663 uses different bits for communicating reset commands/status between MCU and host. Also add an extra initial reset command. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: add dumping Tx power tableSean Wang
Dump the tx power table saved in offload firmware. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: introduce single-sku support for mt7663/mt7921Lorenzo Bianconi
Introduce support for rate-txpower compensation for mt7663/mt7921 chipsets. Rate-txpower limit is specified through dts Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7615: do not use mt7615 single-sku values for mt7663Lorenzo Bianconi
mt7663 mcu relies on different APIs to configure APIs per-rate power limit respect to mt7615 driver. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7615: implement support for using DT rate power limitsFelix Fietkau
Limits are used to update the channel max_power settings and also passed to the firmware on channel changes Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: extend DT rate power limits to support 11ax devicesShayne Chen
Enable parsing per-rate txpower limits from DT for 11ax chipsets. Co-developed-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Felix Fietkau <nbd@nbd.name> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: add functions for parsing rate power limits from DTFelix Fietkau
This subnode can be used to set per-rate tx power limits either per country code / regdomain or globally. These limits are typically provided by the device manufacturers and are used to limit sideband emissions and stay within regulatory limits Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21dt-bindings:net:wireless:mediatek,mt76: introduce power-limits nodeLorenzo Bianconi
Introduce power-limits node in mt76 binding in order to specify per-rate power limit values for each 802.11n/802.11ac rate Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: flush tx status queue on DMA resetFelix Fietkau
After DMA reset, tx status information for queued frames will never arrive. Flush the queue to free skbs immediately instead of waiting for a timeout Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7921: add mt7921_dma_cleanup in mt7921_unregister_deviceLorenzo Bianconi
In order to avoid memory leaks, clean the dma engine unloading the module Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7615: use ieee80211_free_txskb() in mt7615_tx_token_put()Ryder Lee
We should use ieee80211_free_txskb() to report skb status avoid wrong aql accounting after reset. Cc: stable@vger.kernel.org Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7615: only free skbs after mt7615_dma_reset() when reset happensRyder Lee
In mt7615_mac_reset_work(), make sure freeing skbs after mt7615_dma_reset(). Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7915: only free skbs after mt7915_dma_reset() when reset happensRyder Lee
In mt7915_mac_reset_work(), make sure freeing skbs after mt7915_dma_reset(). Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7915: fix memleak when mt7915_unregister_device()Ryder Lee
mt7915_tx_token_put() should get call before mt76_free_pending_txwi(). Fixes: f285dfb98562 ("mt76: mt7915: reset token when mac_reset happens") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7615: fix memleak when mt7615_unregister_device()Ryder Lee
mt7615_tx_token_put() should get call before mt76_free_pending_txwi(). Fixes: a6275e934605 ("mt76: mt7615: reset token when mac_reset happens") Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7915: fix rate setting of tx descriptor in testmodeShayne Chen
Fix ofdm rate index and ldpc setting in rate setting field of tx descriptor. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: mt7915: rework mt7915_tm_set_tx_len()Shayne Chen
Rework mt7915_tm_set_tx_len() with mt76_testmode_alloc_skb() to support larger packet based on a longer tx_time. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21mt76: testmode: add support to send larger packetShayne Chen
Add support to send larger packet in testmode to meet requirements of some test cases. The limit of max packet size is determined based on tx rate mode setting. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-04-21rtlwifi: implement set_tim by update beacon contentPing-Ke Shih
Once beacon content is changed, we update the content to wifi card by send_beacon_frame(). Then, STA with PS can wake up properly to receive its packets. Since we update beacon content to PCI wifi devices every beacon interval, the only one usb device, 8192CU, needs to update beacon content when mac80211 calling set_tim. Reported-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210419065956.6085-1-pkshih@realtek.com
2021-04-21libertas_tf: Remove duplicate struct declarationWan Jiabing
struct lbtf_private is declared twice. One has been declared at 157th line. Remove the duplicate. Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210331023557.2804128-4-wanjiabing@vivo.com
2021-04-21rtw88: refine napi deinit flowPo-Hao Huang
We used to stop napi before disabling irqs. And it turns out to cause some problem when we try to stop device while interrupt arrives. To safely stop pci, we do three steps: 1. disable interrupt 2. synchronize_irq 3. stop_napi Since step 2 and 3 may not finish as expected when interrupt is enabled, use rtwpci->running to decide whether interrupt should be re-enabled at the time. Fixes: 9e2fd29864c5 ("rtw88: add napi support") Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210415084703.27255-4-pkshih@realtek.com
2021-04-21rtw88: Fix potential unrecoverable tx queue stopYu-Yen Ting
If there are lots of packets to be transmitted, the driver would check whether the available descriptors are sufficient according the read/write point of tx queue. Once the available descriptor is not enough, ieee80211_stop_queue is called. TX ISR, meanwhile, is releasing the tx resources after the packets are transmitted. This routine may call ieee80211_wake_queue by checking the available descriptor. The potential queue stop problem would occur when the tx queue is stopped due to the heavy traffic. Then thare is no chance to wake the queue up because the read point is not updated immediately, as a result, no more packets coulde be transmitted in this queue. This patch makes sure the ieee80211_wake_queue could be called properly and avoids the race condition when ring->r.rp, ring->queue_stopped are updated. Signed-off-by: Yu-Yen Ting <steventing@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210415084703.27255-3-pkshih@realtek.com
2021-04-21rtw88: 8821c: Don't set RX_FLAG_DECRYPTED if packet has no encryptionGuo-Feng Fan
The value of GET_RX_DESC_SWDEC() indicates that if this RX packet requires software decryption or not. And software decryption is required when the packet was encrypted and the hardware failed to decrypt it. So, GET_RX_DESC_SWDEC() is negative does not mean that this packet is decrypted, it might just have no encryption at all. To actually see if the packet is decrypted, driver needs to further check if the hardware has successfully decrypted it, with a specific type of encryption algorithm. Signed-off-by: Guo-Feng Fan <vincent_fann@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210415084703.27255-2-pkshih@realtek.com
2021-04-21rtw88: 8822c: debug: allow debugfs to enable/disable TXGAPKGuo-Feng Fan
Use "cat dm_cap" to show all features; where, prefix +/- means feature is enabled/disabled: $ cat dm_cap DM capability 0x00000002 ( 1) +TXGAPK To control dm_cap: use "echo +1 > dm_cap" to enable TXGAPK use "echo -1 > dm_cap" to disable TXGAPK Below is an example to disable TXGAPK. $ echo -1 > dm_cap $ cat dm_cap DM capability 0x00000000 ( 1) -TXGAPK Below is an example to show TXGAPK status $ echo 1 > dm_cap; cat dm_cap ( 1) +TXGAPK path 0: 0x56 = 0x88c89 [TXGAPK] offset 1 0 [TXGAPK] offset 1 1 [TXGAPK] offset 1 2 [TXGAPK] offset 1 3 [TXGAPK] offset 0 4 [TXGAPK] offset 0 5 [TXGAPK] offset 0 6 [TXGAPK] offset 0 7 [TXGAPK] offset 0 8 [TXGAPK] offset 0 9 path 1: 0x56 = 0x89c89 [TXGAPK] offset 1 0 [TXGAPK] offset 1 1 [TXGAPK] offset 1 2 [TXGAPK] offset 1 3 [TXGAPK] offset 0 4 [TXGAPK] offset 0 5 [TXGAPK] offset 0 6 [TXGAPK] offset 0 7 [TXGAPK] offset 0 8 [TXGAPK] offset 0 9 Signed-off-by: Guo-Feng Fan <vincent_fann@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210419003748.3224-4-pkshih@realtek.com
2021-04-21rtw88: 8822c: Add gap-k calibration to improve long range performanceGuo-Feng Fan
gap-k is a calibration mechanism to eliminate power gaps between two nearly rate groups. This mechanism improves performance in long range test by applying proper power value to those rate groups which have nonlinear power gap. Signed-off-by: Guo-Feng Fan <vincent_fann@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210419003748.3224-3-pkshih@realtek.com
2021-04-21rtw88: 8822c: reorder macro position according to the register numberGuo-Feng Fan
This patch doesn't change logic at all, just a refactor patch. 1. Move BIT MASK and BIT definition along with the register definition 2. Remove redundant definition 3. Align macros with Tab key Signed-off-by: Guo-Feng Fan <vincent_fann@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210419003748.3224-2-pkshih@realtek.com
2021-04-20net: wwan: mhi_wwan_ctrl: Fix RX buffer starvationLoic Poulain
The mhi_wwan_rx_budget_dec function is supposed to return true if RX buffer budget has been successfully decremented, allowing to queue a new RX buffer for transfer. However the current implementation is broken when RX budget is '1', in which case budget is decremented but false is returned, preventing to requeue one buffer, and leading to RX buffer starvation. Fixes: fa588eba632d ("net: Add Qcom WWAN control driver") Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-04-28 10:18:12 +0000