summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-06-15fakelb: add xmit_async after stop testcaseAlexander Aring
This patch adds a suspended testcase into the xmit_async functionality. In the hope that we can found race conditions when xmit_async is called after an ieee802154_ops stop. This should never happen. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-15at86rf230: add support for sleep stateAlexander Aring
This patch adds support for sleep state when between stop and start period. In this period the transceiver isn't used by the subsystem, in this time we disable the irq and going into the sleep state. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-15at86rf230: use level high as fallback defaultAlexander Aring
This patch use high level interrupt type as fallback handling when no irq type is given. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-15mac802154: iface: flush workqueue before stopAlexander Aring
This patch flushs the workqueue which is currently used for xmit_sync callback before calling stop driver-ops. Flush the queue will ensure all pending tx frames are transmitted. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-15mac802154: iface: fix hrtimer cancel on ifdownAlexander Aring
The interframe spacing timer is a per phy definition and is part of a ieee802154_local structure. If we have possible multiple interfaces ifdown one interface then the timer should not be cancled. First if the last interface is down and the receive handling is stopped we should be sure that the interframe spacing timer isn't run anymore. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-15mac802154: rx packet handle cleanupVarka Bhadram
This patch replaces !netif_running(sdata->dev) with !ieee802154_sdata_running(sdata) and also devide the code two separate if branches. Signed-off-by: Varka Bhadram <varkab@cdac.in> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-12Bluetooth: Remove redundant check for ACL_LINKJohan Hedberg
The encryption key size is read only for BR/EDR (ACL_LINK) connections so there's no need to check for it in the read_enc_key_size_complete() callback. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-12mac802154: fix flags BIT definitions orderAlexander Aring
This patch fixes commits ("mac802154: cleanup ieee802154 hardware flags") bcbfd2078d9b11277d9c9ce0c30ba73c750503c9 and ("mac802154: cleanup address filtering flags") 6b70a43c7e0202cf285c864bc9f20f607c42e432 by starting the flags definitions at BIT(0) which is same like the previous behaviour. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-12mac802154: cleanup llsec param flagsVarka Bhadram
This patch changes the setting of llsec param flag with the BIT macro. Signed-off-by: Varka Bhadram <varkab@cdac.in> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-12Bluetooth: Use actual encryption key size for SMP over BR/EDRJohan Hedberg
When pairing over SMP over BR/EDR the generated LTK has by default the same key size as the BR/EDR Link Key. Make sure we don't set our Pairing Request/Response max value to anything higher than that. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-12Bluetooth: Read encryption key size for BR/EDR connectionsJohan Hedberg
Since Bluetooth 3.0 there's a HCI command available for reading the encryption key size of an BR/EDR connection. This information is essential e.g. for generating an LTK using SMP over BR/EDR, so store it as part of struct hci_conn. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-12Bluetooth: Move SC-only check outside of BT_CONFIG branchJohan Hedberg
Checking for SC-only mode requirements when we get an encrypt change event shouldn't be limited to the BT_CONFIG state but done any time encryption changes. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-12Bluetooth: Add debugfs support for min LE encryption key sizeJohan Hedberg
This patch adds a debugfs control to set a different minimum LE encryption key size. This is useful for testing that implementation of the encryption key size handling is behaving correctly (e.g. that we get appropriate 'Encryption Key Size' error responses when necessary). Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-12Bluetooth: Add debugfs support for max LE encryption key sizeJohan Hedberg
This patch adds a debugfs control to set a different maximum LE encryption key size. This is useful for testing that implementation of the encryption key size handling is behaving correctly. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-11Bluetooth: Stop sabotaging list poisoningAlexey Dobriyan
list_del() poisons pointers with special values, no need to overwrite them. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-10nl802154: fix misspelled enumChristoffer Holmstedt
Signed-off-by: Christoffer Holmstedt <christoffer@christofferholmstedt.se> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-10Bluetooth: Fix exposing full value of shortened LTKsJohan Hedberg
When we notify user space of a new LTK or distribute an LTK to the remote peer the value passed should be the shortened version so that it's easy to compare values in various traces. The core spec also sets the requirements for the shortening/masking as: "The masking shall be done after generation and before being distributed, used or stored." Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-09Bluetooth: hci_uart: Add bcm_set_baudrate()Frederic Danis
Add vendor specific command to change controller device speed. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-09ieee802154: cc2520: check for return values in cc2520_filter()Stefan Schmidt
neither ram nor register write return values have been checked here. Checking both now. Assign ret with 0 as all other assignments are inside if blocks and might not happen before we return ret. CID: 1230469 Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Acked-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-09Bluetooth: hci_bcsp: Clean up code FixPrasanna Karthik
Fix for spaces prohibited around that '->' reported by checkpatch and space prohibited between function name and open parenthesis '(' Signed-off-by: Prasanna Karthik <mkarthi3@visteon.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-09Bluetooth: Move SCO support under BT_BREDR config optionArron Wang
SCO/eSCO link is supported by BR/EDR controller, it is suitable to move them under BT_BREDR config option Signed-off-by: Arron Wang <arron.wang@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-09Bluetooth: Make l2cap_recv_acldata() and sco_recv_scodata() return voidArron Wang
The return value of l2cap_recv_acldata() and sco_recv_scodata() are not used, then change it to return void Signed-off-by: Arron Wang <arron.wang@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-09Bluetooth: Don't call shutdown when leaving user channelLoic Poulain
Don't interfere with the user channel exclusive access. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-09ieee802154/mrf24j40: make sure we do not override return valuesStefan Schmidt
If we run into an error during rx we set the the error code in ret, but override it afterwards. Using a different variable for the extra case avoids this situation. CID: 1226982, 1226983 Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-09mac802154/iface: remove superfluous WARN_ON call in slave_open()Stefan Schmidt
This call was used before we aligned our code with the wireless code base. We are wanted to handle this in the err: code path. Which would actually not work because the WARN_ON() macro would reset the res value to 0 and thus we would never hit err:. Removing it makes the code do what we actually intend. Signed-off-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-09Bluetooth: btusb: Fix secure send command length alignment on Intel 8260Marcel Holtmann
This patch fixes the command length alignment issue for Intel Bluetooth 8260. The length of parameters in the firmware downloading command must be multiplication of 4. If not, the command must append Intel_NOP command with extra parameters, zeros, at the end, and the firmware file is already included Intel_NOP command for alignment. This patch checks the next command and if the next command is Intel_NOP command, it reads the Intel_NOP command and send them together. For example, if the data from the firmware file looks like this: 8E FC 03 11 22 33 02 FC 03 00 00 00 Previously, btusb sends two commands: 09 FC 06 8E FC 03 11 22 33 09 FC 06 02 FC 03 00 00 00 This won't work because the length of parameters are 6 which violates the 4 byte alignment. This patch will append them together and send as one command: 09 FC 0C 8E FC 03 11 22 33 02 FC 03 00 00 00 Based on previous work from Tedd Ho-Jeong An <tedd.an@intel.com> Reported-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org
2015-06-09Bluetooth: Fix encryption key size handling for LTKsJohan Hedberg
The encryption key size for LTKs is supposed to be applied only at the moment of encryption. When generating a Link Key (using LE SC) from the LTK the full non-shortened value should be used. This patch modifies the code to always keep the full value around and only apply the key size when passing the value to HCI. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-08Bluetooth: btusb: Correct typo in Roper Class 1 Bluetooth DongleAleksei Volkov
That patch corrects the typo in usb vendor id for Roper Class 1 Bluetooth Dongle. Problem with typo is present since 4.0 kernel. Content /sys/kernel/debug/usb/devices for these dongle: T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1310 ProdID=0001 Rev=15.00 S: Manufacturer=SiW S: Product=SiW S: SerialNumber=E7BB050D0B00 C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr= 50mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Aleksei Volkov <info@dv2c.ru> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org # 4.0.x
2015-06-08Bluetooth: btusb: Remove unneeded btusb_read_local_version functionMarcel Holtmann
The btusb_read_local_version function has only a single user and with that just move its functionality in place where it belongs. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-06-08Bluetooth: btusb: Remove double error check from local version commandMarcel Holtmann
The __hci_cmd_sync function already handles the command status and command complete errors. No need to check the status field again. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-06-08Bluetooth: btusb: Fix memory leak in Intel setup routineMarcel Holtmann
The SKB returned from the Intel specific version information command is missing a kfree_skb. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org
2015-06-08Bluetooth: Fix race condition with user channel and setup stageMarcel Holtmann
During the initial setup stage of a controller, the low-level transport is actually active. This means that HCI_UP is true. To avoid toggling the transport off and back on again for normal operation the kernel holds a grace period with HCI_AUTO_OFF that will turn the low-level transport off in case no user is present. The idea of the grace period is important to avoid having to initialize all of the controller twice. So legacy ioctl and the new management interface knows how to clear this grace period and then start normal operation. For the user channel operation this grace period has not been taken into account which results in the problem that HCI_UP and HCI_AUTO_OFF are set and the kernel will return EBUSY. However from a system point of view the controller is ready to be grabbed by either the ioctl, the management interface or the user channel. This patch brings the user channel to the same level as the other two entries for operating a controller. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Cc: stable@vger.kernel.org
2015-06-07ath3k: add support of 13d3:3474 AR3012 deviceDmitry Tunin
BugLink: https://bugs.launchpad.net/bugs/1427680 This device requires new firmware files AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to /lib/firmware/ar3k/ that are not included in linux-firmware yet. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3474 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2015-06-07ath3k: Add support of 0489:e076 AR3012 deviceDmitry Tunin
BugLink: https://bugs.launchpad.net/bugs/1462614 This device requires new firmware files AthrBT_0x11020100.dfu and ramps_0x11020100_40.dfu added to /lib/firmware/ar3k/ that are not included in linux-firmware yet. T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=06 Dev#= 7 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e076 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2015-06-07mac802154: change pan_coord type to boolAlexander Aring
To indicate if it's a coordinator or not a bool is enough. There should no more values available which represent some other state. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-07mac802154: add missing structure commentsAlexander Aring
This patch add missing comments to internal mac802154 structures. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-07mac802154: rearrange attribute in ieee802154_hwAlexander Aring
This patch removes the priv attribute in ieee802154_hw to the right section which is commented by attributes which needs to be filled by driver layer. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-07mac802154: remove unused hw_filt attributeAlexander Aring
This patch removed an attribute from ieee802154_hw structure which is never used inside kernel. Address information are stored inside wpan_dev nowadays. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-07mac802154: cleanup ieee802154 hardware flagsAlexander Aring
This patch changes the ieee802154 hardware flags to enums and setting the flag values with the BIT macro. Additional this patch changes the commenting style for matching usual kernel style. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-07mac802154: remove aack hw flagAlexander Aring
This patch removes the hardware auto acknowdledge flag which indicates that the transceiver supports this handling. This flag is never evaluated inside mac802154 and all transceivers should support this handling by default per hardware. Suggested-by: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Alan Ott <alan@signal11.us> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Acked-by: Stefan Schmidt <stefan@osg.samsung.com> Acked-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-07mac802154: cleanup address filtering flagsAlexander Aring
This patch changes the address filtering flags to enums and setting the flag values with the BIT macro. Additional this patch changes the commenting style for matching usual kernel style. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-07mac802154: remove unneeded vif structAlexander Aring
This patch removes the virtual interface structure from sub if data struct, because it isn't used anywhere. This structure could be useful for give per interface information at softmac driver layer. Nevertheless there exist no use case currently and it contains the interface type information currently. This information is also stored inside wpan dev which is now used to check on the wpan dev interface type. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Acked-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-06Bluetooth: Reorder HCI user channel socket releaseLoic Poulain
The hci close method needs to know if we are in user channel context. Only add the index to mgmt once close is performed. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-06Bluetooth: Fix potential NULL dereference in RFCOMM bind callbackJaganath Kanakkassery
addr can be NULL and it should not be dereferenced before NULL checking. Signed-off-by: Jaganath Kanakkassery <jaganath.k@samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-06Bluetooth: hci_uart: Update Broadcom UART setupFrederic Danis
Use btbcm helpers to perform controller setup. Perform host UART reset to init speed between btbcm_patchram() and btbcm_finalize(). This may be need because firmware loading may have reseted controller UART to init speed. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-06Bluetooth: btbcm: Add helper functions for UART setupFrederic Danis
Firmware loading may reset the controller UART speed and needs to set host UART speed back to init speed. UART drivers setup is split in 3 parts: - btbcm_initialize() resets the controller and returns the firmware name based on controller revision and sub_version. - btbtcm_patchram() (already existing and public), which takes the firmware name as parameter, requests the firmware and loads it to the controller. - btbcm_finalize() which resets the controller, reads local version and checks if the controller address is a default one or not. Remove firmware name retrieval for UART controllers from btbcm_setup_patchram(). Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-06Bluetooth: hci_uart: Support operational speed during setupFrederic Danis
Add initial and operational speeds. Change to operational speed as soon as possible. If controller set_baudrate() fails, continue at initial speed. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-06Bluetooth: btbcm: Add BCM4324B3 UART deviceFrederic Danis
Add "waiting for configuration" address. Add lmp_subver and firmware name for BCM4324B3 controller. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-06Bluetooth: btbcm: Move request/release_firmware()Frederic Danis
Move request/release_firmware() out of btbcm_patchram(). This allows a better error management, if request_firmware() returns an error then the controller will be used without firmware loading and 0 is returned. This will imply to change btbcm_patchram() to accept a firmware instead of firmware name. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-06-04nl802154: export supported commandsVarka Bhadram
This patch will export the supported commands by the devices to the userspace. This will be useful to check if HardMAC drivers can support a specific command or not. Signed-off-by: Varka Bhadram <varkab@cdac.in> Acked-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit (git 2.34.1) at 2025-03-22 17:51:40 +0000