summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-09-11netdev: add netdev_rx_queue_restart()Mina Almasry
Add netdev_rx_queue_restart(), which resets an rx queue using the queue API recently merged[1]. The queue API was merged to enable the core net stack to reset individual rx queues to actuate changes in the rx queue's configuration. In later patches in this series, we will use netdev_rx_queue_restart() to reset rx queues after binding or unbinding dmabuf configuration, which will cause reallocation of the page_pool to repopulate its memory using the new configuration. [1] https://lore.kernel.org/netdev/20240430231420.699177-1-shailend@google.com/T/ Signed-off-by: David Wei <dw@davidwei.uk> Signed-off-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/20240910171458.219195-2-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11Merge branch '200GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== idpf: XDP chapter II: convert Tx completion to libeth Alexander Lobakin says: XDP for idpf is currently 5 chapters: * convert Rx to libeth; * convert Tx completion to libeth (this); * generic XDP and XSk code changes; * actual XDP for idpf via libeth_xdp; * XSk for idpf (^). Part II does the following: * adds generic libeth Tx completion routines; * converts idpf to use generic libeth Tx comp routines; * fixes Tx queue timeouts and robustifies Tx completion in general; * fixes Tx event/descriptor flushes (writebacks). Most idpf patches again remove more lines than adds. Generic Tx completion helpers and structs are needed as libeth_xdp (Ch. III) makes use of them. WB_ON_ITR is needed since XDPSQs don't want to work without it at all. Tx queue timeouts fixes are needed since without them, it's way easier to catch a Tx timeout event when WB_ON_ITR is enabled. * '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: idpf: enable WB_ON_ITR idpf: fix netdev Tx queue stop/wake idpf: refactor Tx completion routines netdevice: add netdev_tx_reset_subqueue() shorthand idpf: convert to libeth Tx buffer completion libeth: add Tx buffer completion helpers ==================== Link: https://patch.msgid.link/20240909205323.3110312-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11net: phy: microchip_t1: Cable Diagnostics for lan887xDivya Koppera
Add support for cable diagnostics in lan887x PHY. Using this we can diagnose connected/open/short wires and also length where cable fault is occurred. Signed-off-by: Divya Koppera <divya.koppera@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240909114339.3446-1-divya.koppera@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11net: ethtool: phy: Check the req_info.pdn field for GET commandsMaxime Chevallier
When processing the netlink GET requests to get PHY info, the req_info.pdn pointer is NULL when no PHY matches the requested parameters, such as when the phy_index is invalid, or there's simply no PHY attached to the interface. Therefore, check the req_info.pdn pointer for NULL instead of dereferencing it. Suggested-by: Eric Dumazet <edumazet@google.com> Reported-by: Eric Dumazet <edumazet@google.com> Closes: https://lore.kernel.org/netdev/CANn89iKRW0WpGAh1tKqY345D8WkYCPm3Y9ym--Si42JZrQAu1g@mail.gmail.com/T/#mfced87d607d18ea32b3b4934dfa18d7b36669285 Fixes: 17194be4c8e1 ("net: ethtool: Introduce a command to list PHYs on an interface") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240910174636.857352-1-maxime.chevallier@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11net: gianfar: fix NVMEM mac addressRosen Penev
If nvmem loads after the ethernet driver, mac address assignments will not take effect. of_get_ethdev_address returns EPROBE_DEFER in such a case so we need to handle that to avoid eth_hw_addr_random. Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240910220913.14101-1-rosenp@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11sfc: Add X4 PF supportJonathan Cooper
Add X4 series. Most functionality is the same as previous EF10 nics but enough is different to warrant a new nic type struct and revision; for example legacy interrupts and SRIOV are not supported. Most removed features will be re-added later as new implementations. Signed-off-by: Jonathan Cooper <jonathan.s.cooper@amd.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Link: https://patch.msgid.link/20240910153014.12803-1-jonathan.s.cooper@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11qlcnic: make read-only const array key staticColin Ian King
Don't populate the const read-only array key on the stack at run time, instead make it static. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240910120635.115266-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11Merge branch 'mptcp-fallback-to-tcp-after-3-mpc-drop-cache'Jakub Kicinski
Matthieu Baerts says: ==================== mptcp: fallback to TCP after 3 MPC drop + cache The SYN + MPTCP_CAPABLE packets could be explicitly dropped by firewalls somewhere in the network, e.g. if they decide to drop packets based on the TCP options, instead of stripping them off. The idea of this series is to fallback to TCP after 3 SYN+MPC drop (patch 2). If the connection succeeds after the fallback, it very likely means a blackhole has been detected. In this case (patch 3), MPTCP can be disabled for a certain period of time, 1h by default. If after this period, MPTCP is still blocked, the period is doubled. This technique is inspired by the one used by TCP FastOpen. This should help applications which want to use MPTCP by default on the client side if available. ==================== Link: https://patch.msgid.link/20240909-net-next-mptcp-fallback-x-mpc-v1-0-da7ebb4cd2a3@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11mptcp: disable active MPTCP in case of blackholeMatthieu Baerts (NGI0)
An MPTCP firewall blackhole can be detected if the following SYN retransmission after a fallback to "plain" TCP is accepted. In case of blackhole, a similar technique to the one in place with TFO is now used: MPTCP can be disabled for a certain period of time, 1h by default. This time period will grow exponentially when more blackhole issues get detected right after MPTCP is re-enabled and will reset to the initial value when the blackhole issue goes away. The blackhole period can be modified thanks to a new sysctl knob: blackhole_timeout. Two new MIB counters help understanding what's happening: - 'Blackhole', incremented when a blackhole is detected. - 'MPCapableSYNTXDisabled', incremented when an MPTCP connection directly falls back to TCP during the blackhole period. Because the technique is inspired by the one used by TFO, an important part of the new code is similar to what can find in tcp_fastopen.c, with some adaptations to the MPTCP case. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/57 Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240909-net-next-mptcp-fallback-x-mpc-v1-3-da7ebb4cd2a3@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11mptcp: fallback to TCP after SYN+MPC dropsMatthieu Baerts (NGI0)
Some middleboxes might be nasty with MPTCP, and decide to drop packets with MPTCP options, instead of just dropping the MPTCP options (or letting them pass...). In this case, it sounds better to fallback to "plain" TCP after 2 retransmissions, and try again. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/477 Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240909-net-next-mptcp-fallback-x-mpc-v1-2-da7ebb4cd2a3@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11mptcp: export mptcp_subflow_early_fallback()Matthieu Baerts (NGI0)
This helper will be used outside protocol.h in the following commit. While at it, also add a 'pr_fallback()' debug print, to help identifying fallbacks. Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240909-net-next-mptcp-fallback-x-mpc-v1-1-da7ebb4cd2a3@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11Merge branch 'net-hsr-use-the-seqnr-lock-for-frames-received-via-interlink-port'Jakub Kicinski
Sebastian Andrzej Siewior says: ==================== net: hsr: Use the seqnr lock for frames received via interlink port. This is follow-up to the thread at https://lore.kernel.org/all/20240904133725.1073963-1-edumazet@google.com/ ==================== Link: https://patch.msgid.link/20240906132816.657485-1-bigeasy@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11net: hsr: Remove interlink_sequence_nr.Eric Dumazet
Remove interlink_sequence_nr which is unused. [ bigeasy: split out from Eric's patch ]. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://patch.msgid.link/20240906132816.657485-3-bigeasy@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11net: hsr: Use the seqnr lock for frames received via interlink port.Sebastian Andrzej Siewior
syzbot reported that the seqnr_lock is not acquire for frames received over the interlink port. In the interlink case a new seqnr is generated and assigned to the frame. Frames, which are received over the slave port have already a sequence number assigned so the lock is not required. Acquire the hsr_priv::seqnr_lock during in the invocation of hsr_forward_skb() if a packet has been received from the interlink port. Reported-by: syzbot+3d602af7549af539274e@syzkaller.appspotmail.com Closes: https://groups.google.com/g/syzkaller-bugs/c/KppVvGviGg4/m/EItSdCZdBAAJ Fixes: 5055cccfc2d1c ("net: hsr: Provide RedBox support (HSR-SAN)") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Lukasz Majewski <lukma@denx.de> Link: https://patch.msgid.link/20240906132816.657485-2-bigeasy@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11Merge tag 'wireless-next-2024-09-11' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.12 The last -next "new features" pull request for v6.12. The stack now supports DFS on MLO but otherwise nothing really standing out. Major changes: cfg80211/mac80211 * EHT rate support in AQL airtime * DFS support for MLO rtw89 * complete BT-coexistence code for RTL8852BT * RTL8922A WoWLAN net-detect support * tag 'wireless-next-2024-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (105 commits) wifi: brcmfmac: cfg80211: Convert comma to semicolon wifi: rsi: Remove an unused field in struct rsi_debugfs wifi: libertas: Cleanup unused declarations wifi: wilc1000: Convert using devm_clk_get_optional_enabled() in wilc_bus_probe() wifi: wilc1000: Convert using devm_clk_get_optional_enabled() in wilc_sdio_probe() wifi: wilc1000: fix potential RCU dereference issue in wilc_parse_join_bss_param wifi: mwifiex: Fix memcpy() field-spanning write warning in mwifiex_cmd_802_11_scan_ext() wifi: mac80211: use two-phase skb reclamation in ieee80211_do_stop() wifi: cfg80211: fix two more possible UBSAN-detected off-by-one errors wifi: cfg80211: fix kernel-doc for per-link data wifi: mt76: mt7925: replace chan config with extend txpower config for clc wifi: mt76: mt7925: fix a potential array-index-out-of-bounds issue for clc wifi: mt76: mt7615: check devm_kasprintf() returned value wifi: mt76: mt7925: convert comma to semicolon wifi: mt76: mt7925: fix a potential association failure upon resuming wifi: mt76: Avoid multiple -Wflex-array-member-not-at-end warnings wifi: mt76: mt7921: Check devm_kasprintf() returned value wifi: mt76: mt7915: check devm_kasprintf() returned value wifi: mt76: mt7915: avoid long MCU command timeouts during SER wifi: mt76: mt7996: fix uninitialized TLV data ... ==================== Link: https://patch.msgid.link/20240911084147.A205DC4AF0F@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11Merge branch 'lan743x-phylink'David S. Miller
Raju Lakkaraju says: ==================== Add support to PHYLINK for LAN743x/PCI11x1x chips This is the follow-up patch series of https://lkml.iu.edu/hypermail/linux/kernel/2310.2/02078.html Divide the PHYLINK adaptation and SFP modifications into two separate patch series. The current patch series focuses on transitioning the LAN743x driver's PHY support from phylib to phylink. Tested on PCI11010 Rev-1 Evaluation board Change List: ============ V5 -> V6: - Remove the lan743x_find_max_speed( ) function. Not require - Add EEE enable check before calling lan743x_mac_eee_enable( ) function V4 -> V5: - Remove the fixed_phy_unregister( ) function. Not require - Remove the "phydev->eee_enabled" check to update the MAC EEE enable/disable - Call lan743x_mac_eee_enable() with true after update tx_lpi_timer. - Add phy_support_eee() to initialize the EEE flags V3 -> V4: - Add fixed-link patch along with this series. Note: Note: This code was developed by Mr.Russell King Ref: https://lore.kernel.org/netdev/LV8PR11MB8700C786F5F1C274C73036CC9F8E2@LV8PR11MB8700.namprd11.prod.outlook.com/T/#me943adf54f1ea082edf294aba448fa003a116815 - Change phylink fixed-link function header's string from "Returns" to "Returns:" - Remove the EEE private variable from LAN743x adapter strcture and fix the EEE's set/get functions - set the individual caps (i.e. _RGMII, _RGMII_ID, _RGMII_RXID and __RGMII_TXID) replace with phy_interface_set_rgmii( ) function - Change lan743x_set_eee( ) to lan743x_mac_eee_enable( ) V2 -> V3: - Remove the unwanted parens in each of these if() sub-blocks - Replace "to_net_dev(config->dev)" with "netdev". - Add GMII_ID/RGMII_TXID/RGMII_RXID in supported_interfaces - Fix the lan743x_phy_handle_exists( ) return type V1 -> V2: - Fix the Russell King's comments i.e. remove the speed, duplex update in lan743x_phylink_mac_config( ) - pre-March 2020 legacy support has been removed V0 -> V1: - Integrate with Synopsys DesignWare XPCS drivers - Based on external review comments, - Changes made to SGMII interface support only 1G/100M/10M bps speed - Changes made to 2500Base-X interface support only 2.5Gbps speed - Add check for not is_sgmii_en with is_sfp_support_en support - Change the "pci11x1x_strap_get_status" function return type from void to int - Add ethtool phylink wol, eee, pause get/set functions ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-11net: lan743x: Add support to ethtool phylink get and set settingsRaju Lakkaraju
Add support to ethtool phylink functions: - get/set settings like speed, duplex etc - get/set the wake-on-lan (WOL) - get/set the energy-efficient ethernet (EEE) - get/set the pause Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-11net: lan743x: Migrate phylib to phylinkRaju Lakkaraju
Migrate phy support from phylib to phylink. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-11net: lan743x: Create separate Link Speed Duplex state functionRaju Lakkaraju
Create separate Link Speed Duplex (LSD) update state function from lan743x_sgmii_config () to use as subroutine. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-11net: lan743x: Create separate PCS power reset functionRaju Lakkaraju
Create separate PCS power reset function from lan743x_sgmii_config () to use as subroutine. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-11net: phylink: Add phylink_set_fixed_link() to configure fixed link state in ↵Russell King
phylink The function allows for the configuration of a fixed link state for a given phylink instance. This addition is particularly useful for network devices that operate with a fixed link configuration, where the link parameters do not change dynamically. By using `phylink_set_fixed_link()`, drivers can easily set up the fixed link state during initialization or configuration changes. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <linux@armlinux.org.uk> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-10Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== ice: support devlink subfunction Michal Swiatkowski says: Currently ice driver does not allow creating more than one networking device per physical function. The only way to have more hardware backed netdev is to use SR-IOV. Following patchset adds support for devlink port API. For each new pcisf type port, driver allocates new VSI, configures all resources needed, including dynamically MSIX vectors, program rules and registers new netdev. This series supports only one Tx/Rx queue pair per subfunction. Example commands: devlink port add pci/0000:31:00.1 flavour pcisf pfnum 1 sfnum 1000 devlink port function set pci/0000:31:00.1/1 hw_addr 00:00:00:00:03:14 devlink port function set pci/0000:31:00.1/1 state active devlink port function del pci/0000:31:00.1/1 Make the port representor and eswitch code generic to support subfunction representor type. VSI configuration is slightly different between VF and SF. It needs to be reflected in the code. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: subfunction activation and base devlink ops ice: basic support for VLAN in subfunctions ice: support subfunction devlink Tx topology ice: implement netdevice ops for SF representor ice: check if SF is ready in ethtool ops ice: don't set target VSI for subfunction ice: create port representor for SF ice: make representor code generic ice: implement netdev for subfunction ice: base subfunction aux driver ice: allocate devlink for subfunction ice: treat subfunction VSI the same as PF VSI ice: add basic devlink subfunctions support ice: export ice ndo_ops functions ice: add new VSI type for subfunctions ==================== Link: https://patch.msgid.link/20240906223010.2194591-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10Merge tag 'mlx5-updates-2024-09-02' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2024-08-29 HW-Managed Flow Steering in mlx5 driver Yevgeny Kliteynik says: ======================= 1. Overview ----------- ConnectX devices support packet matching, modification, and redirection. This functionality is referred as Flow Steering. To configure a steering rule, the rule is written to the device-owned memory. This memory is accessed and cached by the device when processing a packet. The first implementation of Flow Steering was done in FW, and it is referred in the mlx5 driver as Device-Managed Flow Steering (DMFS). Later we introduced SW-managed Flow Steering (SWS or SMFS), where the driver is writing directly to the device's configuration memory (ICM) through RC QP using RDMA operations (RDMA-read and RDAM-write), thus achieving higher rates of rule insertion/deletion. Now we introduce a new flow steering implementation: HW-Managed Flow Steering (HWS or HMFS). In this new approach, the driver is configuring steering rules directly to the HW using the WQs with a special new type of WQE. This way we can reach higher rule insertion/deletion rate with much lower CPU utilization compared to SWS. The key benefits of HWS as opposed to SWS: + HW manages the steering decision tree - HW calculates CRC for each entry - HW handles tree hash collisions - HW & FW manage objects refcount + HW keeps cache coherency: - HW provides tree access locking and synchronization - HW provides notification on completion + Insertion rate isn’t affected by background traffic - Dedicated HW components that handle insertion 2. Performance -------------- Measuring Connection Tracking with simple IPv4 flows w/o NAT, we are able to get ~5 times more flows offloaded per second using HWS. 3. Configuration ---------------- The enablement of HWS mode in eswitch manager is done using the same devlink param that is already used for switching between FW-managed steering and SW-managed steering modes: # devlink dev param set pci/<PCI_ID> name flow_steering_mode cmod runtime value hmfs 4. Upstream Submission ---------------------- HWS support consists of 3 main components: + Steering: - The lower layer that exposes HWS API to upper layers and implements all the management of flow steering building blocks + FS-Core - Implementation of fs_hws layer to enable fs_core to use HWS instead of FW or SW steering - Create HW steering action pools to utilize the ability of HWS to share steering actions among different rules - Add support for configuring HWS mode through devlink command, similar to configuring SWS mode + Connection Tracking - Implementation of CT support for HW steering - Hooks up the CT ops for the new steering mode and uses the HWS API to implement connection tracking. Because of the large number of patches, we need to perform the submission in several separate patch series. This series is the first submission that lays the ground work for the next submissions, where an actual user of HWS will be added. 5. Patches in this series ------------------------- This patch series contains implementation of the first bullet from above. ======================= * tag 'mlx5-updates-2024-09-02' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: HWS, added API and enabled HWS support net/mlx5: HWS, added send engine and context handling net/mlx5: HWS, added debug dump and internal headers net/mlx5: HWS, added backward-compatible API handling net/mlx5: HWS, added memory management handling net/mlx5: HWS, added vport handling net/mlx5: HWS, added modify header pattern and args handling net/mlx5: HWS, added FW commands handling net/mlx5: HWS, added matchers functionality net/mlx5: HWS, added definers handling net/mlx5: HWS, added rules handling net/mlx5: HWS, added tables handling net/mlx5: HWS, added actions handling net/mlx5: Added missing definitions in preparation for HW Steering net/mlx5: Added missing mlx5_ifc definition for HW Steering ==================== Link: https://patch.msgid.link/20240909181250.41596-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10Merge tag 'ipsec-next-2024-09-10' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2024-09-10 1) Remove an unneeded WARN_ON on packet offload. From Patrisious Haddad. 2) Add a copy from skb_seq_state to buffer function. This is needed for the upcomming IPTFS patchset. From Christian Hopps. 3) Spelling fix in xfrm.h. From Simon Horman. 4) Speed up xfrm policy insertions. From Florian Westphal. 5) Add and revert a patch to support xfrm interfaces for packet offload. This patch was just half cooked. 6) Extend usage of the new xfrm_policy_is_dead_or_sk helper. From Florian Westphal. 7) Update comments on sdb and xfrm_policy. From Florian Westphal. 8) Fix a null pointer dereference in the new policy insertion code From Florian Westphal. 9) Fix an uninitialized variable in the new policy insertion code. From Nathan Chancellor. * tag 'ipsec-next-2024-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next: xfrm: policy: Restore dir assignments in xfrm_hash_rebuild() xfrm: policy: fix null dereference Revert "xfrm: add SA information to the offloaded packet" xfrm: minor update to sdb and xfrm_policy comments xfrm: policy: use recently added helper in more places xfrm: add SA information to the offloaded packet xfrm: policy: remove remaining use of inexact list xfrm: switch migrate to xfrm_policy_lookup_bytype xfrm: policy: don't iterate inexact policies twice at insert time selftests: add xfrm policy insertion speed test script xfrm: Correct spelling in xfrm.h net: add copy from skb_seq_state to buffer function xfrm: Remove documentation WARN_ON to limit return values for offloaded SA ==================== Link: https://patch.msgid.link/20240910065507.2436394-1-steffen.klassert@secunet.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10Merge branch 'bnxt_en-msix-improvements'Jakub Kicinski
Michael Chan says: ==================== bnxt_en: MSIX improvements This patchset makes some improvements related to MSIX. The first patch adjusts the default MSIX vectors assigned for RoCE. On the PF, the number of MSIX is increased to 64 from the current 9. The second patch allocates additional MSIX vectors ahead of time when changing ethtool channels if dynamic MSIX is supported. The 3rd patch makes sure that the IRQ name is not truncated. ==================== Link: https://patch.msgid.link/20240909202737.93852-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10bnxt_en: resize bnxt_irq name field to fit format stringEdwin Peer
The name field of struct bnxt_irq is written using snprintf in bnxt_setup_msix(). Make the field large enough to fit the maximal formatted string to prevent truncation. Truncated IRQ names are less meaningful to the user. For example, "enp4s0f0np0-TxRx-0" gets truncated to "enp4s0f0np0-TxRx-" with the existing code. Make sure we have space for the extra characters added to the IRQ names: - the characters introduced by the static format string: hyphens - the maximal static substituted ring type string: "TxRx" - the maximum length of an integer formatted as a string, even though reasonable ring numbers would never be as long as this. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240909202737.93852-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10bnxt_en: Add MSIX check in bnxt_check_rings()Michael Chan
bnxt_check_rings() is called to ensure that we have the hardware ring resources before committing to reinitialize with the new number of rings. MSIX vectors are never checked at this point, because up until recently we must first disable MSIX before we can allocate the new set of MSIX vectors. Now that we support dynamic MSIX allocation, check to make sure we can dynamically allocate the new MSIX vectors as the last step in bnxt_check_rings() if dynamic MSIX is supported. For example, the IOMMU group may limit the number of MSIX vectors for the device. With this patch, the ring change will fail more gracefully when there is not enough MSIX vectors. It is also better to move bnxt_check_rings() to be called as the last step when changing ethtool rings. Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240909202737.93852-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10bnxt_en: Increase the number of MSIX vectors for RoCE deviceMichael Chan
If RocE is supported on the device, set the number of RoCE MSIX vectors to the number of online CPUs + 1 and capped at these maximums: VF: 2 NPAR: 5 PF: 64 For the PF, the maximum is now increased from the previous value of 9 to get better performance for kernel applications. Remove the unnecessary check for BNXT_FLAG_ROCE_CAP. bnxt_set_dflt_ulp_msix() will only be called if the flag is set. Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240909202737.93852-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10net: amlogic,meson-dwmac: Fix "amlogic,tx-delay-ns" schemaRob Herring (Arm)
The "amlogic,tx-delay-ns" property schema has unnecessary type reference as it's a standard unit suffix, and the constraints are in freeform text rather than schema. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://patch.msgid.link/20240909172342.487675-2-robh@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10Merge branch 'net-xilinx-axienet-partial-checksum-offload-improvements'Jakub Kicinski
Sean Anderson says: ==================== net: xilinx: axienet: Partial checksum offload improvements Partial checksum offload is not always used when it could be. Enable it in more cases. ==================== Link: https://patch.msgid.link/20240909161016.1149119-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10net: xilinx: axienet: Relax partial rx checksum checksSean Anderson
The partial rx checksum feature computes a checksum over the entire packet, regardless of the L3 protocol. Remove the check for IPv4. Additionally, testing with csum.py (from kselftests) shows no anomalies with 64-byte packets, so we can remove that check as well. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240909161016.1149119-5-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10net: xilinx: axienet: Set RXCSUM in featuresSean Anderson
When it is supported by hardware, we enable receive checksum offload unconditionally. Update features to reflect this. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Link: https://patch.msgid.link/20240909161016.1149119-4-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10net: xilinx: axienet: Enable NETIF_F_HW_CSUM for partial tx checksummingSean Anderson
Partial tx chechsumming is completely generic and does not depend on the L3/L4 protocol. Signal this to the net subsystem by enabling the more-generic offload feature (instead of restricting ourselves to TCP/UDP over IPv4 checksumming only like is necessary with full checksumming). Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240909161016.1149119-3-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10net: xilinx: axienet: Remove unused checksum variablesSean Anderson
These variables are set but never used. Remove them. Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Link: https://patch.msgid.link/20240909161016.1149119-2-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10rtase: Fix spelling mistake: "tx_underun" -> "tx_underrun"Colin Ian King
There is a spelling mistake in the struct field tx_underun, rename it to tx_underrun. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240909134612.63912-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10r8169: Fix spelling mistake: "tx_underun" -> "tx_underrun"Colin Ian King
There is a spelling mistake in the struct field tx_underun, rename it to tx_underrun. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://patch.msgid.link/20240909140021.64884-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10sch_cake: constify inverse square root cacheDave Taht
sch_cake uses a cache of the first 16 values of the inverse square root calculation for the Cobalt AQM to save some cycles on the fast path. This cache is populated when the qdisc is first loaded, but there's really no reason why it can't just be pre-populated. So change it to be pre-populated with constants, which also makes it possible to constify it. This gives a modest space saving for the module (not counting debug data): .text: -224 bytes .rodata: +80 bytes .bss: -64 bytes Total: -192 bytes Signed-off-by: Dave Taht <dave.taht@gmail.com> [ fixed up comment, rewrote commit message ] Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://patch.msgid.link/20240909091630.22177-1-toke@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10net: dsa: microchip: update tag_ksz masks for KSZ9477 familyPieter Van Trappen
Remove magic number 7 by introducing a GENMASK macro instead. Remove magic number 0x80 by using the BIT macro instead. Signed-off-by: Pieter Van Trappen <pieter.van.trappen@cern.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20240909134301.75448-1-vtpieter@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10Merge branch ↵Jakub Kicinski
'net-timestamp-introduce-a-flag-to-filter-out-rx-software-and-hardware-report' Jason Xing says: ==================== net-timestamp: introduce a flag to filter out rx software and hardware report When one socket is set SOF_TIMESTAMPING_RX_SOFTWARE which means the whole system turns on the netstamp_needed_key button, other sockets that only have SOF_TIMESTAMPING_SOFTWARE will be affected and then print the rx timestamp information even without setting SOF_TIMESTAMPING_RX_SOFTWARE generation flag. How to solve it without breaking users? We introduce a new flag named SOF_TIMESTAMPING_OPT_RX_FILTER. Using it together with SOF_TIMESTAMPING_SOFTWARE can stop reporting the rx software timestamp. Similarly, we also filter out the hardware case where one process enables the rx hardware generation flag, then another process only passing SOF_TIMESTAMPING_RAW_HARDWARE gets the timestamp. So we can set both SOF_TIMESTAMPING_RAW_HARDWARE and SOF_TIMESTAMPING_OPT_RX_FILTER to stop reporting rx hardware timestamp after this patch applied. v6: https://lore.kernel.org/20240906095640.77533-1-kerneljasonxing@gmail.com v5: https://lore.kernel.org/20240905071738.3725-1-kerneljasonxing@gmail.com v4: https://lore.kernel.org/20240830153751.86895-1-kerneljasonxing@gmail.com v3: https://lore.kernel.org/20240828160145.68805-1-kerneljasonxing@gmail.com v2: https://lore.kernel.org/20240825152440.93054-1-kerneljasonxing@gmail.com ==================== Link: https://patch.msgid.link/20240909015612.3856-1-kerneljasonxing@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10net-timestamp: add selftests for SOF_TIMESTAMPING_OPT_RX_FILTERJason Xing
Test a few possible cases where we use SOF_TIMESTAMPING_OPT_RX_FILTER with software or hardware report/generation flag. Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240909015612.3856-3-kerneljasonxing@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10net-timestamp: introduce SOF_TIMESTAMPING_OPT_RX_FILTER flagJason Xing
introduce a new flag SOF_TIMESTAMPING_OPT_RX_FILTER in the receive path. User can set it with SOF_TIMESTAMPING_SOFTWARE to filter out rx software timestamp report, especially after a process turns on netstamp_needed_key which can time stamp every incoming skb. Previously, we found out if an application starts first which turns on netstamp_needed_key, then another one only passing SOF_TIMESTAMPING_SOFTWARE could also get rx timestamp. Now we handle this case by introducing this new flag without breaking users. Quoting Willem to explain why we need the flag: "why a process would want to request software timestamp reporting, but not receive software timestamp generation. The only use I see is when the application does request SOF_TIMESTAMPING_SOFTWARE | SOF_TIMESTAMPING_TX_SOFTWARE." Similarly, this new flag could also be used for hardware case where we can set it with SOF_TIMESTAMPING_RAW_HARDWARE, then we won't receive hardware receive timestamp. Another thing about errqueue in this patch I have a few words to say: In this case, we need to handle the egress path carefully, or else reporting the tx timestamp will fail. Egress path and ingress path will finally call sock_recv_timestamp(). We have to distinguish them. Errqueue is a good indicator to reflect the flow direction. Suggested-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240909015612.3856-2-kerneljasonxing@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10net-timestamp: correct the use of SOF_TIMESTAMPING_RAW_HARDWAREJason Xing
SOF_TIMESTAMPING_RAW_HARDWARE is a report flag which passes the timestamps generated by either SOF_TIMESTAMPING_TX_HARDWARE or SOF_TIMESTAMPING_RX_HARDWARE to the userspace all the time. So let us revise the doc here. Link: https://lore.kernel.org/all/66d8c21d3042a_163d93294cb@willemb.c.googlers.com.notmuch/ Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jason Xing <kernelxing@tencent.com> Link: https://patch.msgid.link/20240908124141.39628-1-kerneljasonxing@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10Merge branch 'net-stmmac-fpe-via-ethtool-tc'Jakub Kicinski
Furong Xu says: ==================== net: stmmac: FPE via ethtool + tc Move the Frame Preemption(FPE) over to the new standard API which uses ethtool-mm/tc-mqprio/tc-taprio. ==================== Link: https://patch.msgid.link/cover.1725631883.git.0x1207@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10net: stmmac: silence FPE kernel logsFurong Xu
ethtool --show-mm can get real-time state of FPE. fpe_irq_status logs should keep quiet. tc-taprio can always query driver state, delete unbalanced logs. Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/39943d7967f291674a97ef0572878aca273087e9.1725631883.git.0x1207@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10net: stmmac: support fp parameter of tc-taprioFurong Xu
tc-taprio can select whether traffic classes are express or preemptible. 0) tc qdisc add dev eth1 parent root handle 100 taprio \ num_tc 4 \ map 0 1 2 3 2 2 2 2 2 2 2 2 2 2 2 3 \ queues 1@0 1@1 1@2 1@3 \ base-time 1000000000 \ sched-entry S 03 10000000 \ sched-entry S 0e 10000000 \ flags 0x2 fp P E E E 1) After some traffic tests, MAC merge layer statistics are all good. Local device: [ { "ifname": "eth1", "pmac-enabled": true, "tx-enabled": true, "tx-active": true, "tx-min-frag-size": 60, "rx-min-frag-size": 60, "verify-enabled": true, "verify-time": 100, "max-verify-time": 128, "verify-status": "SUCCEEDED", "statistics": { "MACMergeFrameAssErrorCount": 0, "MACMergeFrameSmdErrorCount": 0, "MACMergeFrameAssOkCount": 0, "MACMergeFragCountRx": 0, "MACMergeFragCountTx": 17837, "MACMergeHoldCount": 18639 } } ] Remote device: [ { "ifname": "end1", "pmac-enabled": true, "tx-enabled": true, "tx-active": true, "tx-min-frag-size": 60, "rx-min-frag-size": 60, "verify-enabled": true, "verify-time": 100, "max-verify-time": 128, "verify-status": "SUCCEEDED", "statistics": { "MACMergeFrameAssErrorCount": 0, "MACMergeFrameSmdErrorCount": 0, "MACMergeFrameAssOkCount": 17189, "MACMergeFragCountRx": 17837, "MACMergeFragCountTx": 0, "MACMergeHoldCount": 0 } } ] Tested on DWMAC CORE 5.10a Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/0d21ae356fb3cab77337527e87d46748a4852055.1725631883.git.0x1207@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10net: stmmac: support fp parameter of tc-mqprioFurong Xu
tc-mqprio can select whether traffic classes are express or preemptible. After some traffic tests, MAC merge layer statistics are all good. Local device: ethtool --include-statistics --json --show-mm eth1 [ { "ifname": "eth1", "pmac-enabled": true, "tx-enabled": true, "tx-active": true, "tx-min-frag-size": 60, "rx-min-frag-size": 60, "verify-enabled": true, "verify-time": 100, "max-verify-time": 128, "verify-status": "SUCCEEDED", "statistics": { "MACMergeFrameAssErrorCount": 0, "MACMergeFrameSmdErrorCount": 0, "MACMergeFrameAssOkCount": 0, "MACMergeFragCountRx": 0, "MACMergeFragCountTx": 35105, "MACMergeHoldCount": 0 } } ] Remote device: ethtool --include-statistics --json --show-mm end1 [ { "ifname": "end1", "pmac-enabled": true, "tx-enabled": true, "tx-active": true, "tx-min-frag-size": 60, "rx-min-frag-size": 60, "verify-enabled": true, "verify-time": 100, "max-verify-time": 128, "verify-status": "SUCCEEDED", "statistics": { "MACMergeFrameAssErrorCount": 0, "MACMergeFrameSmdErrorCount": 0, "MACMergeFrameAssOkCount": 35105, "MACMergeFragCountRx": 35105, "MACMergeFragCountTx": 0, "MACMergeHoldCount": 0 } } ] Tested on DWMAC CORE 5.10a Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/592965ea93ed8240f0a1b8f6f8ebb8914f69419b.1725631883.git.0x1207@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10net: stmmac: configure FPE via ethtool-mmFurong Xu
Implement ethtool --show-mm and --set-mm callbacks. NIC up/down, link up/down, suspend/resume, kselftest-ethtool_mm, all tested okay. Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/06ed409314fe0ee37b78b800922f2c0cce762532.1725631883.git.0x1207@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10net: stmmac: refactor FPE verification processFurong Xu
Drop driver defined stmmac_fpe_state, and switch to common ethtool_mm_verify_status for local TX verification status. Local side and remote side verification processes are completely independent. There is no reason at all to keep a local state and a remote state. Add a spinlock to avoid races among ISR, timer, link update and register configuration. This patch is based on Vladimir Oltean's proposal. Vladimir Oltean says: ==================== In the INITIAL state, the timer sends MPACKET_VERIFY. Eventually the stmmac_fpe_event_status() IRQ fires and advances the state to VERIFYING, then rearms the timer after verify_time ms. If a subsequent IRQ comes in and modifies the state to SUCCEEDED after getting MPACKET_RESPONSE, the timer sees this. It must enable the EFPE bit now. Otherwise, it decrements the verify_limit counter and tries again. Eventually it moves the status to FAILED, from which the IRQ cannot move it anywhere else, except for another stmmac_fpe_apply() call. ==================== Co-developed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/151f86c8428eba967039718c6bf90a7d841e703b.1725631883.git.0x1207@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10net: stmmac: drop stmmac_fpe_handshakeFurong Xu
ethtool --set-mm can trigger FPE verification process by calling stmmac_fpe_send_mpacket, stmmac_fpe_handshake should be gone. Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://patch.msgid.link/42018b1a15eb3ced567fd6a73798c7cd4e08799a.1725631883.git.0x1207@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10net: stmmac: move stmmac_fpe_cfg to stmmac_priv dataFurong Xu
By moving the fpe_cfg field to the stmmac_priv data, stmmac_fpe_cfg becomes platform-data eventually, instead of a run-time config. Suggested-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Link: https://patch.msgid.link/d9b3d7ecb308c5e39778a4c8ae9df288a2754379.1725631883.git.0x1207@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-03-15 20:21:20 +0000