summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-03-12nfp: switch to using data path structures for reconfigurationJakub Kicinski
Instead of passing around sets of rings and their parameters just store all information in the data path structure. We will no longer user xchg() on XDP programs when we swap programs while the traffic is guaranteed not to be flowing. This allows us to simply assign the entire data path structures instead of copying field by field. The optimization to reallocate only the rings on the side (RX/TX) which has been changed is also removed since it seems like it's not worth the code complexity. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12nfp: use dp to carry xdp_prog at reconfig timeJakub Kicinski
Use xdp_prog member of data path struct to carry the xdp_prog to alloc/free free functions. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12nfp: use dp to carry mtu at reconfig timeJakub Kicinski
Move the mtu member from ring set to data path struct. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12nfp: use dp to carry fl_bufsz at reconfig timeJakub Kicinski
Use fl_bufsz member of data path struct to carry desired size of free list entries. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12nfp: use dp to carry number of stack tx rings and vectorsJakub Kicinski
Instead of passing variables around use dp to store number of tx rings for the stack and number of IRQ vectors. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12nfp: pass new data path to ring reconfigJakub Kicinski
Make callers of nfp_net_ring_reconfig() pass newly allocated data path structure. We will gradually make use of that structure instead of passing parameters around to all the allocation functions. This commit adds allocation and propagation of new data path struct, no parameters are converted, yet. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12nfp: move control BAR pointer into data path structureJakub Kicinski
Control BAR pointer is used to unmask interrupts so it should be in the first cacheline of adapter structure. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12nfp: separate data path information from the reset of adapter structureJakub Kicinski
Move all data path information into a separate structure. This way we will be able to allocate new data path with all new rings etc. and swap it in easily. No functional changes. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12Merge branch 'stmmac-multiqueue-mac-prep'David S. Miller
Joao Pinto says: ==================== prepare mac operations for multiple queues As agreed with David Miller, this patch-set is the first of 3 to enable multiple queues in stmmac. This first one concentrates on mac operations adding functionalities as: a) Configuration through DT b) RX and TX scheduling algorithms programming b) TX queues weight programming (essential in weightes algorithms) c) RX enable as DCB or AVB (preparing for future AVB support) d) Mapping RX queue to DMA channel e) IRQ treatment prepared for multiple queues f) Debug dump prepared for multiple queues g) CBS configuration In v3 patch-set version I included a new patch to enable CBS configuration (Patch 9). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: configuration of CBS in case of a TX AVB queueJoao Pinto
This patch adds the configuration of the AVB Credit-Based Shaper. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: mac debug prepared for multiple queuesJoao Pinto
This patch prepares mac debug dump for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: prepare irq_status for mtlJoao Pinto
This patch prepares mac irq status treatment for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: flow_ctrl functions adapted to mtlJoao Pinto
This patch adapts flow_ctrl function to prepare it for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: mapping mtl rx to dma channelJoao Pinto
This patch adds the functionality of RX queue to dma channel mapping based on configuration. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: mtl rx queue enabled as dcb or avbJoao Pinto
This patch introduces the enabling of RX queues as DCB or as AVB based on configuration. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: configure tx queue weightJoao Pinto
This patch adds TX queues weight programming. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: configure mtl rx and tx algorithmsJoao Pinto
This patch adds the RX and TX scheduling algorithms programming. It introduces the multiple queues configuration function (stmmac_mtl_configuration) in stmmac_main. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: multiple queues dt configurationJoao Pinto
This patch adds the multiple queues configuration in the Device Tree. It was also created a set of structures to keep the RX and TX queues configurations to be used in the driver. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12Merge branch 'stmmac-tegra186'David S. Miller
Thierry Reding says: ==================== net: stmmac: Fixes and Tegra186 support This series of patches start with a few cleanups that I ran across while adding Tegra186 support to the stmmac driver. It then adds code for FIFO size parsing from feature registers and finally enables support for the incarnation of the Synopsys DWC QOS IP found on NVIDIA Tegra186 SoCs. This is based on next-20170310. Changes in v2: - address review comments by Mikko and Joao - add two additional cleanup patches ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: dwc-qos: Add Tegra186 supportThierry Reding
The NVIDIA Tegra186 SoC contains an instance of the Synopsys DWC ethernet QOS IP core. The binding that it uses is slightly different from existing ones because of the integration (clocks, resets, ...). Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: dwc-qos: Split out ->probe() and ->remove()Thierry Reding
Split out the binding specific parts of ->probe() and ->remove() to enable the driver to support variants of the binding. This is useful in order to keep backwards-compatibility while making it easy for a sub- driver to deal only with the updated bindings rather than having to add compatibility quirks all over the place. Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-By: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: Program RX queue size and flow controlThierry Reding
Program the receive queue size based on the RX FIFO size and enable hardware flow control for large FIFOs. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: Parse FIFO sizes from feature registersThierry Reding
New version of this core encode the FIFO sizes in one of the feature registers. Use these sizes as default, but still allow device tree to override them for backwards compatibility. Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: Check for DMA mapping errorsThierry Reding
When DMA mapping an SKB fragment, the mapping must be checked for errors, otherwise the DMA debug code will complain upon unmap. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: Balance PTP reference clock enable/disableThierry Reding
clk_prepare_enable() and clk_disable_unprepare() for this clock aren't properly balanced, which can trigger a WARN_ON() in the common clock framework. Reviewed-By: Joao Pinto <jpinto@synopsys.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: Disable PTP reference clock on errorThierry Reding
If an error occurs while opening the device, make sure to disable the PTP reference clock. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: Stop PHY and remove TX timer on errorThierry Reding
If an error occurs while opening the device, make sure that both the TX timer and the PHY are properly cleaned up. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: Rename clk_ptp_ref clock to ptp_refThierry Reding
There aren't currently any users of the "clk_ptp_ref", but there are other references to "ptp_ref", so I'm leaning towards considering that a typo. Fix it. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12vxlan: use appropriate family on L3 missVincent Bernat
When sending a L3 miss, the family is set to AF_INET even for IPv6. This causes userland (eg "ip monitor") to be confused. Ensure we send the appropriate family in this case. For L2 miss, keep using AF_INET. Signed-off-by: Vincent Bernat <vincent@bernat.im> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: Eliminate duplicated codes by creating one new function in_dev_select_addrGao Feng
There are two duplicated loops codes which used to select right address in current codes. Now eliminate these codes by creating one new function in_dev_select_addr. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12Merge branch ↵David S. Miller
'sctp-rx-side-stream-reconf-asoc-reset-and-add-streams-and-response' Xin Long says: ==================== sctp: add receiver-side procedures for stream reconf asoc reset and add streams and response Patch 2/7, 4/7, 5/7, 6/7 are to implement the process of asoc reset request, add streams requests and all kinds of responses. Patch 1/7 and 3/7 are ahead of 2/7 and 4/7 to add two event notification for asoc reset and add streams. Patch 7/7 is the last patch for implementing rfc6525 sctp stream reconf to add sysctl and sockopt interface for users to enable sctp stream reconf. After this patchset, sctp stream reconf will be able to work as rfc6525. v1->v2: - put these into a smaller group. - rename the titles of the commits and improve some changelogs. - improve sctp_chunk_lookup_strreset_param and reuse it in patch 4/7. - process addstrm outreq as the ack of in addstrm inreq if strreset_chunk is not NULL in patch 4/7. - remove the stream alloc when sending addstrm inreq, and the process in peer will response it by sending a addstrm out request back in patch 5/7. - adjust the process of addstrm in resp to fit in the codes that only alloc streams through addstrm outreq in patch 6/7. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12sctp: add get and set sockopt for reconf_enableXin Long
This patchset is to add SCTP_RECONFIG_SUPPORTED sockopt, it would set and get asoc reconf_enable value when asoc_id is set, or it would set and get ep reconf_enalbe value if asoc_id is 0. It is also to add sysctl interface for users to set the default value for reconf_enable. After this patch, stream reconf will work. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12sctp: implement receiver-side procedures for the Reconf Response ParameterXin Long
This patch is to implement Receiver-Side Procedures for the Re-configuration Response Parameter in rfc6525 section 5.2.7. sctp_process_strreset_resp would process the response for any kind of reconf request, and the stream reconf is applied only when the response result is success. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12sctp: implement receiver-side procedures for the Add Incoming Streams ↵Xin Long
Request Parameter This patch is to implement Receiver-Side Procedures for the Add Incoming Streams Request Parameter described in rfc6525 section 5.2.6. It is also to fix that it shouldn't have add streams when sending addstrm in request, as the process in peer will handle it by sending a addstrm out request back. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12sctp: implement receiver-side procedures for the Add Outgoing Streams ↵Xin Long
Request Parameter This patch is to add Receiver-Side Procedures for the Add Outgoing Streams Request Parameter described in section 5.2.5. It is also to improve sctp_chunk_lookup_strreset_param, so that it can be used for processing addstrm_out request. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12sctp: add support for generating add stream change event notificationXin Long
This patch is to add Stream Change Event described in rfc6525 section 6.1.3. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12sctp: implement receiver-side procedures for the SSN/TSN Reset Request ParameterXin Long
This patch is to implement Receiver-Side Procedures for the SSN/TSN Reset Request Parameter described in rfc6525 section 6.2.4. The process is kind of complicate, it's wonth having some comments from section 6.2.4 in the codes. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12sctp: add support for generating assoc reset event notificationXin Long
This patch is to add Association Reset Event described in rfc6525 section 6.1.2. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12liquidio: optimize DMA in NUMA systemsVSR Burru
Optimize DMA in NUMA systems by allocating memory from NUMA node that NIC is plugged in to; DMA will no longer cross NUMA nodes. If NIC IRQs are pinned to a local CPU, that CPU's access to the DMA'd data is also optimized. Signed-off-by: VSR Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Satanand Burla <satananda.burla@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12Merge branch 'netvsc-fix-module-removal-hangs'David S. Miller
Stephen Hemminger says: ==================== netvsc: fix module removal hangs A couple of patches are necessary to make netvsc driver module removable again. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12netvsc: fix hang on netvsc module removalstephen hemminger
The code in netvsc_device_remove was incorrectly calling napi_disable repeatedly on the same element. This would cause attempts to remove netvsc module to hang. Fixes: 2506b1dc4bbe ("netvsc: implement NAPI") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12netvsc: need napi scheduled during removalstephen hemminger
Since rndis_halt_device waits until all outstanding sends and receives are completed. Netvsc device needs to still schedule NAPI to see those completions. Fixes: 2506b1dc4bbe ("netvsc: implement NAPI") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12Merge branch 'dpaa_eth-next' of git://git.freescale.com/ppc/upstream/linuxDavid S. Miller
Madalin Bucur says: ==================== QorIQ DPAA 1 updates This patch set introduces a series of fixes and features to the DPAA 1 drivers. Besides activating hardware Rx checksum offloading, four traffic classes are added for Tx traffic prioritisation. changes from v1: added patch to enable context-A stashing ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: ipv6: Add early demux handler for UDP unicastsubashab@codeaurora.org
While running a single stream UDPv6 test, we observed that amount of CPU spent in NET_RX softirq was much greater than UDPv4 for an equivalent receive rate. The test here was run on an ARM64 based Android system. On further analysis with perf, we found that UDPv6 was spending significant time in the statistics netfilter targets which did socket lookup per packet. These statistics rules perform a lookup when there is no socket associated with the skb. Since there are multiple instances of these rules based on UID, there will be equal number of lookups per skb. By introducing early demux for UDPv6, we avoid the redundant lookups. This also helped to improve the performance (800Mbps -> 870Mbps) on a CPU limited system in a single stream UDPv6 receive test with 1450 byte sized datagrams using iperf. v1->v2: Use IPv6 cookie to validate dst instead of 0 as suggested by Eric Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: sched: make default fifo qdiscs appear in the dumpJiri Kosina
The original reason [1] for having hidden qdiscs (potential scalability issues in qdisc_match_from_root() with single linked list in case of large amount of qdiscs) has been invalidated by 59cc1f61f0 ("net: sched: convert qdisc linked list to hashtable"). This allows us for bringing more clarity and determinism into the dump by making default pfifo qdiscs visible. We're not turning this on by default though, at it was deemed [2] too intrusive / unnecessary change of default behavior towards userspace. Instead, TCA_DUMP_INVISIBLE netlink attribute is introduced, which allows applications to request complete qdisc hierarchy dump, including the ones that have always been implicit/invisible. Singleton noop_qdisc stays invisible, as teaching the whole infrastructure about singletons would require quite some surgery with very little gain (seeing no qdisc or seeing noop qdisc in the dump is probably setting the same user expectation). [1] http://lkml.kernel.org/r/1460732328.10638.74.camel@edumazet-glaptop3.roam.corp.google.com [2] http://lkml.kernel.org/r/20161021.105935.1907696543877061916.davem@davemloft.net Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: hyperv: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Tested-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: fjes: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: via: via-velocity: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: via: via-rhine: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: intel: ixgbe: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-04-15 04:29:01 +0000