summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-07-25vfio-iommufd: Add detach_ioas support for emulated VFIO devicesYi Liu
This prepares for adding DETACH ioctl for emulated VFIO devices. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Terrence Xu <terrence.xu@intel.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718135551.6592-16-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-07-25iommufd/device: Add iommufd_access_detach() APINicolin Chen
Previously, the detach routine is only done by the destroy(). And it was called by vfio_iommufd_emulated_unbind() when the device runs close(), so all the mappings in iopt were cleaned in that setup, when the call trace reaches this detach() routine. Now, there's a need of a detach uAPI, meaning that it does not only need a new iommufd_access_detach() API, but also requires access->ops->unmap() call as a cleanup. So add one. However, leaving that unprotected can introduce some potential of a race condition during the pin_/unpin_pages() call, where access->ioas->iopt is getting referenced. So, add an ioas_lock to protect the context of iopt referencings. Also, to allow the iommufd_access_unpin_pages() callback to happen via this unmap() call, add an ioas_unpin pointer, so the unpin routine won't be affected by the "access->ioas = NULL" trick. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Terrence Xu <terrence.xu@intel.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718135551.6592-15-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-07-25vfio-iommufd: Add detach_ioas support for physical VFIO devicesYi Liu
This prepares for adding DETACH ioctl for physical VFIO devices. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Terrence Xu <terrence.xu@intel.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718135551.6592-14-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-07-25vfio: Record devid in vfio_device_fileYi Liu
.bind_iommufd() will generate an ID to represent this bond, which is needed by userspace for further usage. Store devid in vfio_device_file to avoid passing the pointer in multiple places. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Terrence Xu <terrence.xu@intel.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718135551.6592-13-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-07-25vfio-iommufd: Split bind/attach into two stepsYi Liu
This aligns the bind/attach logic with the coming vfio device cdev support. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Terrence Xu <terrence.xu@intel.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718135551.6592-12-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-07-25vfio-iommufd: Move noiommu compat validation out of vfio_iommufd_bind()Yi Liu
This moves the noiommu compat validation logic into vfio_df_group_open(). This is more consistent with what will be done in vfio device cdev path. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Terrence Xu <terrence.xu@intel.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718135551.6592-11-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-07-25vfio: Make vfio_df_open() single open for device cdev pathYi Liu
VFIO group has historically allowed multi-open of the device FD. This was made secure because the "open" was executed via an ioctl to the group FD which is itself only single open. However, no known use of multiple device FDs today. It is kind of a strange thing to do because new device FDs can naturally be created via dup(). When we implement the new device uAPI (only used in cdev path) there is no natural way to allow the device itself from being multi-opened in a secure manner. Without the group FD we cannot prove the security context of the opener. Thus, when moving to the new uAPI we block the ability of opening a device multiple times. Given old group path still allows it we store a vfio_group pointer in struct vfio_device_file to differentiate. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Terrence Xu <terrence.xu@intel.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718135551.6592-10-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-07-25vfio: Add cdev_device_open_cnt to vfio_groupYi Liu
This is for counting the devices that are opened via the cdev path. This count is increased and decreased by the cdev path. The group path checks it to achieve exclusion with the cdev path. With this, only one path (group path or cdev path) will claim DMA ownership. This avoids scenarios in which devices within the same group may be opened via different paths. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Terrence Xu <terrence.xu@intel.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718135551.6592-9-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-07-25vfio: Block device access via device fd until device is openedYi Liu
Allow the vfio_device file to be in a state where the device FD is opened but the device cannot be used by userspace (i.e. its .open_device() hasn't been called). This inbetween state is not used when the device FD is spawned from the group FD, however when we create the device FD directly by opening a cdev it will be opened in the blocked state. The reason for the inbetween state is that userspace only gets a FD but doesn't gain access permission until binding the FD to an iommufd. So in the blocked state, only the bind operation is allowed. Completing bind will allow user to further access the device. This is implemented by adding a flag in struct vfio_device_file to mark the blocked state and using a simple smp_load_acquire() to obtain the flag value and serialize all the device setup with the thread accessing this device. Following this lockless scheme, it can safely handle the device FD unbound->bound but it cannot handle bound->unbound. To allow this we'd need to add a lock on all the vfio ioctls which seems costly. So once device FD is bound, it remains bound until the FD is closed. Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Terrence Xu <terrence.xu@intel.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718135551.6592-8-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-07-25vfio: Pass struct vfio_device_file * to vfio_device_open/close()Yi Liu
This avoids passing too much parameters in multiple functions. Per the input parameter change, rename the function to be vfio_df_open/close(). Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Terrence Xu <terrence.xu@intel.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718135551.6592-7-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-07-25kvm/vfio: Accept vfio device file from userspaceYi Liu
This defines KVM_DEV_VFIO_FILE* and make alias with KVM_DEV_VFIO_GROUP*. Old userspace uses KVM_DEV_VFIO_GROUP* works as well. Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Tested-by: Terrence Xu <terrence.xu@intel.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718135551.6592-6-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-07-25kvm/vfio: Prepare for accepting vfio device fdYi Liu
This renames kvm_vfio_group related helpers to prepare for accepting vfio device fd. No functional change is intended. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Terrence Xu <terrence.xu@intel.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718135551.6592-5-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-07-25vfio: Accept vfio device file in the KVM facing kAPIYi Liu
This makes the vfio file kAPIs to accept vfio device files, also a preparation for vfio device cdev support. For the kvm set with vfio device file, kvm pointer is stored in struct vfio_device_file, and use kvm_ref_lock to protect kvm set and kvm pointer usage within VFIO. This kvm pointer will be set to vfio_device after device file is bound to iommufd in the cdev path. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Terrence Xu <terrence.xu@intel.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718135551.6592-4-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-07-25vfio: Refine vfio file kAPIs for KVMYi Liu
This prepares for making the below kAPIs to accept both group file and device file instead of only vfio group file. bool vfio_file_enforced_coherent(struct file *file); void vfio_file_set_kvm(struct file *file, struct kvm *kvm); Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Terrence Xu <terrence.xu@intel.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718135551.6592-3-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-07-25vfio: Allocate per device file structureYi Liu
This is preparation for adding vfio device cdev support. vfio device cdev requires: 1) A per device file memory to store the kvm pointer set by KVM. It will be propagated to vfio_device:kvm after the device cdev file is bound to an iommufd. 2) A mechanism to block device access through device cdev fd before it is bound to an iommufd. To address the above requirements, this adds a per device file structure named vfio_device_file. For now, it's only a wrapper of struct vfio_device pointer. Other fields will be added to this per file structure in future commits. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Terrence Xu <terrence.xu@intel.com> Tested-by: Nicolin Chen <nicolinc@nvidia.com> Tested-by: Matthew Rosato <mjrosato@linux.ibm.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718135551.6592-2-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-07-25vfio/pci: Allow passing zero-length fd array in VFIO_DEVICE_PCI_HOT_RESETYi Liu
This is the way user to invoke hot-reset for the devices opened by cdev interface. User should check the flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED in the output of VFIO_DEVICE_GET_PCI_HOT_RESET_INFO ioctl before doing hot-reset for cdev devices. Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718105542.4138-11-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-07-25vfio/pci: Copy hot-reset device info to userspace in the devices loopYi Liu
This copies the vfio_pci_dependent_device to userspace during looping each affected device for reporting vfio_pci_hot_reset_info. This avoids counting the affected devices and allocating a potential large buffer to store the vfio_pci_dependent_device of all the affected devices before copying them to userspace. Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20230718105542.4138-10-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-07-25vfio/pci: Extend VFIO_DEVICE_GET_PCI_HOT_RESET_INFO for vfio device cdevYi Liu
This allows VFIO_DEVICE_GET_PCI_HOT_RESET_INFO ioctl use the iommufd_ctx of the cdev device to check the ownership of the other affected devices. When VFIO_DEVICE_GET_PCI_HOT_RESET_INFO is called on an IOMMUFD managed device, the new flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID is reported to indicate the values returned are IOMMUFD devids rather than group IDs as used when accessing vfio devices through the conventional vfio group interface. Additionally the flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED will be reported in this mode if all of the devices affected by the hot-reset are owned by either virtue of being directly bound to the same iommufd context as the calling device, or implicitly owned via a shared IOMMU group. Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Suggested-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718105542.4138-9-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-07-25vfio: Add helper to search vfio_device in a dev_setYi Liu
There are drivers that need to search vfio_device within a given dev_set. e.g. vfio-pci. So add a helper. vfio_pci_is_device_in_set() now returns -EBUSY in commit a882c16a2b7e ("vfio/pci: Change vfio_pci_try_bus_reset() to use the dev_set") where it was trying to preserve the return of vfio_pci_try_zap_and_vma_lock_cb(). However, it makes more sense to return -ENODEV. Suggested-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Terrence Xu <terrence.xu@intel.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718105542.4138-8-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-07-25vfio: Mark cdev usage in vfio_deviceYi Liu
This can be used to differentiate whether to report group_id or devid in the revised VFIO_DEVICE_GET_PCI_HOT_RESET_INFO ioctl. At this moment, no cdev path yet, so the vfio_device_cdev_opened() helper always returns false. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Terrence Xu <terrence.xu@intel.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718105542.4138-7-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-07-25iommufd: Add helper to retrieve iommufd_ctx and devidYi Liu
This is needed by the vfio-pci driver to report affected devices in the hot-reset for a given device. Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Terrence Xu <terrence.xu@intel.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718105542.4138-6-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-07-25iommufd: Add iommufd_ctx_has_group()Yi Liu
This adds the helper to check if any device within the given iommu_group has been bound with the iommufd_ctx. This is helpful for the checking on device ownership for the devices which have not been bound but cannot be bound to any other iommufd_ctx as the iommu_group has been bound. Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Terrence Xu <terrence.xu@intel.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718105542.4138-5-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-07-25iommufd: Reserve all negative IDs in the iommufd xarrayYi Liu
With this reservation, IOMMUFD users can encode the negative IDs for specific purposes. e.g. VFIO needs two reserved values to tell userspace the ID returned is not valid but has other meaning. Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Terrence Xu <terrence.xu@intel.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718105542.4138-4-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-07-25vfio/pci: Move the existing hot reset logic to be a helperYi Liu
This prepares to add another method for hot reset. The major hot reset logic are moved to vfio_pci_ioctl_pci_hot_reset_groups(). No functional change is intended. Suggested-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Tested-by: Terrence Xu <terrence.xu@intel.com> Tested-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718105542.4138-3-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-07-25vfio/pci: Update comment around group_fd get in vfio_pci_ioctl_pci_hot_reset()Yi Liu
This suits more on what the code does. Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Yanting Jiang <yanting.jiang@intel.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Link: https://lore.kernel.org/r/20230718105542.4138-2-yi.l.liu@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2023-07-23Linux 6.5-rc3Linus Torvalds
2023-07-23Merge tag 'trace-v6.5-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: - Swapping the ring buffer for snapshotting (for things like irqsoff) can crash if the ring buffer is being resized. Disable swapping when this happens. The missed swap will be reported to the tracer - Report error if the histogram fails to be created due to an error in adding a histogram variable, in event_hist_trigger_parse() - Remove unused declaration of tracing_map_set_field_descr() * tag 'trace-v6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/histograms: Return an error if we fail to add histogram to hist_vars list ring-buffer: Do not swap cpu_buffer during resize process tracing: Remove unused extern declaration tracing_map_set_field_descr()
2023-07-23Merge tag 'kbuild-fixes-v6.5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix stale help text in gconfig - Support *.S files in compile_commands.json - Flatten KBUILD_CFLAGS - Fix external module builds with Rust so that temporary files are created in the modules directories instead of the kernel tree * tag 'kbuild-fixes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: rust: avoid creating temporary files kbuild: flatten KBUILD_CFLAGS gen_compile_commands: add assembly files to compilation database kconfig: gconfig: correct program name in help text kconfig: gconfig: drop the Show Debug Info help text
2023-07-24kbuild: rust: avoid creating temporary filesMiguel Ojeda
`rustc` outputs by default the temporary files (i.e. the ones saved by `-Csave-temps`, such as `*.rcgu*` files) in the current working directory when `-o` and `--out-dir` are not given (even if `--emit=x=path` is given, i.e. it does not use those for temporaries). Since out-of-tree modules are compiled from the `linux` tree, `rustc` then tries to create them there, which may not be accessible. Thus pass `--out-dir` explicitly, even if it is just for the temporary files. Similarly, do so for Rust host programs too. Reported-by: Raphael Nestler <raphael.nestler@gmail.com> Closes: https://github.com/Rust-for-Linux/linux/issues/1015 Reported-by: Andrea Righi <andrea.righi@canonical.com> Tested-by: Raphael Nestler <raphael.nestler@gmail.com> # non-hostprogs Tested-by: Andrea Righi <andrea.righi@canonical.com> # non-hostprogs Fixes: 295d8398c67e ("kbuild: specify output names separately for each emission type from rustc") Cc: stable@vger.kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Tested-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-07-23Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "ARM: - Avoid pKVM finalization if KVM initialization fails - Add missing BTI instructions in the hypervisor, fixing an early boot failure on BTI systems - Handle MMU notifiers correctly for non hugepage-aligned memslots - Work around a bug in the architecture where hypervisor timer controls have UNKNOWN behavior under nested virt - Disable preemption in kvm_arch_hardware_enable(), fixing a kernel BUG in cpu hotplug resulting from per-CPU accessor sanity checking - Make WFI emulation on GICv4 systems robust w.r.t. preemption, consistently requesting a doorbell interrupt on vcpu_put() - Uphold RES0 sysreg behavior when emulating older PMU versions - Avoid macro expansion when initializing PMU register names, ensuring the tracepoints pretty-print the sysreg s390: - Two fixes for asynchronous destroy x86 fixes will come early next week" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: pv: fix index value of replaced ASCE KVM: s390: pv: simplify shutdown and fix race KVM: arm64: Fix the name of sys_reg_desc related to PMU KVM: arm64: Correctly handle RES0 bits PMEVTYPER<n>_EL0.evtCount KVM: arm64: vgic-v4: Make the doorbell request robust w.r.t preemption KVM: arm64: Add missing BTI instructions KVM: arm64: Correctly handle page aging notifiers for unaligned memslot KVM: arm64: Disable preemption in kvm_arch_hardware_enable() KVM: arm64: Handle kvm_arm_init failure correctly in finalize_pkvm KVM: arm64: timers: Use CNTHCTL_EL2 when setting non-CNTKCTL_EL1 bits
2023-07-23Merge tag 'ext4_for_linus-6.5-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Bug and regression fixes for 6.5-rc3 for ext4's mballoc and jbd2's checkpoint code" * tag 'ext4_for_linus-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix rbtree traversal bug in ext4_mb_use_preallocated ext4: fix off by one issue in ext4_mb_choose_next_group_best_avail() ext4: correct inline offset when handling xattrs in inode body jbd2: remove __journal_try_to_free_buffer() jbd2: fix a race when checking checkpoint buffer busy jbd2: Fix wrongly judgement for buffer head removing while doing checkpoint jbd2: remove journal_clean_one_cp_list() jbd2: remove t_checkpoint_io_list jbd2: recheck chechpointing non-dirty buffer
2023-07-23Merge tag '6.5-rc2-smb3-client-fixes-ver2' of ↵Linus Torvalds
git://git.samba.org/sfrench/cifs-2.6 Pull smb client fix from Steve French: "Add minor debugging improvement. The change improves ability to read a network trace to debug problems on encrypted connections which are very common (e.g. using wireshark or tcpdump). That works today with tools like 'smbinfo keys /mnt/file' but requires passing in a filename on the mount (see e.g. [1]), but it often makes more sense to just pass in the mount point path (ie a directory not a filename). So this fix was needed to debug some types of problems (an obvious example is on an encrypted connection failing operations on an empty share or with no files in the root of the directory) - so you can simply pass in the 'smbinfo keys <mntpoint>' and get the information that wireshark needs" Link: https://wiki.samba.org/index.php/Wireshark_Decryption [1] * tag '6.5-rc2-smb3-client-fixes-ver2' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module version number for cifs.ko cifs: allow dumping keys for directories too
2023-07-23Merge tag 'kvm-s390-master-6.5-1' of ↵Paolo Bonzini
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD Two fixes for asynchronous destroy
2023-07-23Merge tag 'kvmarm-fixes-6.5-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.5, part #1 - Avoid pKVM finalization if KVM initialization fails - Add missing BTI instructions in the hypervisor, fixing an early boot failure on BTI systems - Handle MMU notifiers correctly for non hugepage-aligned memslots - Work around a bug in the architecture where hypervisor timer controls have UNKNOWN behavior under nested virt. - Disable preemption in kvm_arch_hardware_enable(), fixing a kernel BUG in cpu hotplug resulting from per-CPU accessor sanity checking. - Make WFI emulation on GICv4 systems robust w.r.t. preemption, consistently requesting a doorbell interrupt on vcpu_put() - Uphold RES0 sysreg behavior when emulating older PMU versions - Avoid macro expansion when initializing PMU register names, ensuring the tracepoints pretty-print the sysreg.
2023-07-23tracing/histograms: Return an error if we fail to add histogram to hist_vars ↵Mohamed Khalfella
list Commit 6018b585e8c6 ("tracing/histograms: Add histograms to hist_vars if they have referenced variables") added a check to fail histogram creation if save_hist_vars() failed to add histogram to hist_vars list. But the commit failed to set ret to failed return code before jumping to unregister histogram, fix it. Link: https://lore.kernel.org/linux-trace-kernel/20230714203341.51396-1-mkhalfella@purestorage.com Cc: stable@vger.kernel.org Fixes: 6018b585e8c6 ("tracing/histograms: Add histograms to hist_vars if they have referenced variables") Signed-off-by: Mohamed Khalfella <mkhalfella@purestorage.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-07-23ring-buffer: Do not swap cpu_buffer during resize processChen Lin
When ring_buffer_swap_cpu was called during resize process, the cpu buffer was swapped in the middle, resulting in incorrect state. Continuing to run in the wrong state will result in oops. This issue can be easily reproduced using the following two scripts: /tmp # cat test1.sh //#! /bin/sh for i in `seq 0 100000` do echo 2000 > /sys/kernel/debug/tracing/buffer_size_kb sleep 0.5 echo 5000 > /sys/kernel/debug/tracing/buffer_size_kb sleep 0.5 done /tmp # cat test2.sh //#! /bin/sh for i in `seq 0 100000` do echo irqsoff > /sys/kernel/debug/tracing/current_tracer sleep 1 echo nop > /sys/kernel/debug/tracing/current_tracer sleep 1 done /tmp # ./test1.sh & /tmp # ./test2.sh & A typical oops log is as follows, sometimes with other different oops logs. [ 231.711293] WARNING: CPU: 0 PID: 9 at kernel/trace/ring_buffer.c:2026 rb_update_pages+0x378/0x3f8 [ 231.713375] Modules linked in: [ 231.714735] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.5.0-rc1-00276-g20edcec23f92 #15 [ 231.716750] Hardware name: linux,dummy-virt (DT) [ 231.718152] Workqueue: events update_pages_handler [ 231.719714] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 231.721171] pc : rb_update_pages+0x378/0x3f8 [ 231.722212] lr : rb_update_pages+0x25c/0x3f8 [ 231.723248] sp : ffff800082b9bd50 [ 231.724169] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 0000000000000000 [ 231.726102] x26: 0000000000000001 x25: fffffffffffff010 x24: 0000000000000ff0 [ 231.728122] x23: ffff0000c3a0b600 x22: ffff0000c3a0b5c0 x21: fffffffffffffe0a [ 231.730203] x20: ffff0000c3a0b600 x19: ffff0000c0102400 x18: 0000000000000000 [ 231.732329] x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffe7aa8510 [ 231.734212] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000002 [ 231.736291] x11: ffff8000826998a8 x10: ffff800082b9baf0 x9 : ffff800081137558 [ 231.738195] x8 : fffffc00030e82c8 x7 : 0000000000000000 x6 : 0000000000000001 [ 231.740192] x5 : ffff0000ffbafe00 x4 : 0000000000000000 x3 : 0000000000000000 [ 231.742118] x2 : 00000000000006aa x1 : 0000000000000001 x0 : ffff0000c0007208 [ 231.744196] Call trace: [ 231.744892] rb_update_pages+0x378/0x3f8 [ 231.745893] update_pages_handler+0x1c/0x38 [ 231.746893] process_one_work+0x1f0/0x468 [ 231.747852] worker_thread+0x54/0x410 [ 231.748737] kthread+0x124/0x138 [ 231.749549] ret_from_fork+0x10/0x20 [ 231.750434] ---[ end trace 0000000000000000 ]--- [ 233.720486] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 233.721696] Mem abort info: [ 233.721935] ESR = 0x0000000096000004 [ 233.722283] EC = 0x25: DABT (current EL), IL = 32 bits [ 233.722596] SET = 0, FnV = 0 [ 233.722805] EA = 0, S1PTW = 0 [ 233.723026] FSC = 0x04: level 0 translation fault [ 233.723458] Data abort info: [ 233.723734] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 233.724176] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 233.724589] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 233.725075] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000104943000 [ 233.725592] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ 233.726231] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 233.726720] Modules linked in: [ 233.727007] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.5.0-rc1-00276-g20edcec23f92 #15 [ 233.727777] Hardware name: linux,dummy-virt (DT) [ 233.728225] Workqueue: events update_pages_handler [ 233.728655] pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 233.729054] pc : rb_update_pages+0x1a8/0x3f8 [ 233.729334] lr : rb_update_pages+0x154/0x3f8 [ 233.729592] sp : ffff800082b9bd50 [ 233.729792] x29: ffff800082b9bd50 x28: ffff8000825f7000 x27: 0000000000000000 [ 233.730220] x26: 0000000000000000 x25: ffff800082a8b840 x24: ffff0000c0102418 [ 233.730653] x23: 0000000000000000 x22: fffffc000304c880 x21: 0000000000000003 [ 233.731105] x20: 00000000000001f4 x19: ffff0000c0102400 x18: ffff800082fcbc58 [ 233.731727] x17: 0000000000000000 x16: 0000000000000001 x15: 0000000000000001 [ 233.732282] x14: ffff8000825fe0c8 x13: 0000000000000001 x12: 0000000000000000 [ 233.732709] x11: ffff8000826998a8 x10: 0000000000000ae0 x9 : ffff8000801b760c [ 233.733148] x8 : fefefefefefefeff x7 : 0000000000000018 x6 : ffff0000c03298c0 [ 233.733553] x5 : 0000000000000002 x4 : 0000000000000000 x3 : 0000000000000000 [ 233.733972] x2 : ffff0000c3a0b600 x1 : 0000000000000000 x0 : 0000000000000000 [ 233.734418] Call trace: [ 233.734593] rb_update_pages+0x1a8/0x3f8 [ 233.734853] update_pages_handler+0x1c/0x38 [ 233.735148] process_one_work+0x1f0/0x468 [ 233.735525] worker_thread+0x54/0x410 [ 233.735852] kthread+0x124/0x138 [ 233.736064] ret_from_fork+0x10/0x20 [ 233.736387] Code: 92400000 910006b5 aa000021 aa0303f7 (f9400060) [ 233.736959] ---[ end trace 0000000000000000 ]--- After analysis, the seq of the error is as follows [1-5]: int ring_buffer_resize(struct trace_buffer *buffer, unsigned long size, int cpu_id) { for_each_buffer_cpu(buffer, cpu) { cpu_buffer = buffer->buffers[cpu]; //1. get cpu_buffer, aka cpu_buffer(A) ... ... schedule_work_on(cpu, &cpu_buffer->update_pages_work); //2. 'update_pages_work' is queue on 'cpu', cpu_buffer(A) is passed to // update_pages_handler, do the update process, set 'update_done' in // complete(&cpu_buffer->update_done) and to wakeup resize process. //----> //3. Just at this moment, ring_buffer_swap_cpu is triggered, //cpu_buffer(A) be swaped to cpu_buffer(B), the max_buffer. //ring_buffer_swap_cpu is called as the 'Call trace' below. Call trace: dump_backtrace+0x0/0x2f8 show_stack+0x18/0x28 dump_stack+0x12c/0x188 ring_buffer_swap_cpu+0x2f8/0x328 update_max_tr_single+0x180/0x210 check_critical_timing+0x2b4/0x2c8 tracer_hardirqs_on+0x1c0/0x200 trace_hardirqs_on+0xec/0x378 el0_svc_common+0x64/0x260 do_el0_svc+0x90/0xf8 el0_svc+0x20/0x30 el0_sync_handler+0xb0/0xb8 el0_sync+0x180/0x1c0 //<---- /* wait for all the updates to complete */ for_each_buffer_cpu(buffer, cpu) { cpu_buffer = buffer->buffers[cpu]; //4. get cpu_buffer, cpu_buffer(B) is used in the following process, //the state of cpu_buffer(A) and cpu_buffer(B) is totally wrong. //for example, cpu_buffer(A)->update_done will leave be set 1, and will //not 'wait_for_completion' at the next resize round. if (!cpu_buffer->nr_pages_to_update) continue; if (cpu_online(cpu)) wait_for_completion(&cpu_buffer->update_done); cpu_buffer->nr_pages_to_update = 0; } ... } //5. the state of cpu_buffer(A) and cpu_buffer(B) is totally wrong, //Continuing to run in the wrong state, then oops occurs. Link: https://lore.kernel.org/linux-trace-kernel/202307191558478409990@zte.com.cn Signed-off-by: Chen Lin <chen.lin5@zte.com.cn> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-07-23tracing: Remove unused extern declaration tracing_map_set_field_descr()YueHaibing
Since commit 08d43a5fa063 ("tracing: Add lock-free tracing_map"), this is never used, so can be removed. Link: https://lore.kernel.org/linux-trace-kernel/20230722032123.24664-1-yuehaibing@huawei.com Cc: <mhiramat@kernel.org> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2023-07-23kbuild: flatten KBUILD_CFLAGSAlexey Dobriyan
Make it slightly easier to see which compiler options are added and removed (and not worry about column limit too!). Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Nicolas Schier <n.schier@avm.de> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-07-23gen_compile_commands: add assembly files to compilation databaseBenjamin Gray
Like C source files, tooling can find it useful to have the assembly source file compilation recorded. The .S extension appears to used across all architectures. Signed-off-by: Benjamin Gray <bgray@linux.ibm.com> Reviewed-by: Fangrui Song <maskray@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-07-23ext4: fix rbtree traversal bug in ext4_mb_use_preallocatedOjaswin Mujoo
During allocations, while looking for preallocations(PA) in the per inode rbtree, we can't do a direct traversal of the tree because ext4_mb_discard_group_preallocation() can paralelly mark the pa deleted and that can cause direct traversal to skip some entries. This was leading to a BUG_ON() being hit [1] when we missed a PA that could satisfy our request and ultimately tried to create a new PA that would overlap with the missed one. To makes sure we handle that case while still keeping the performance of the rbtree, we make use of the fact that the only pa that could possibly overlap the original goal start is the one that satisfies the below conditions: 1. It must have it's logical start immediately to the left of (ie less than) original logical start. 2. It must not be deleted To find this pa we use the following traversal method: 1. Descend into the rbtree normally to find the immediate neighboring PA. Here we keep descending irrespective of if the PA is deleted or if it overlaps with our request etc. The goal is to find an immediately adjacent PA. 2. If the found PA is on right of original goal, use rb_prev() to find the left adjacent PA. 3. Check if this PA is deleted and keep moving left with rb_prev() until a non deleted PA is found. 4. This is the PA we are looking for. Now we can check if it can satisfy the original request and proceed accordingly. This approach also takes care of having deleted PAs in the tree. (While we are at it, also fix a possible overflow bug in calculating the end of a PA) [1] https://lore.kernel.org/linux-ext4/CA+G9fYv2FRpLqBZf34ZinR8bU2_ZRAUOjKAD3+tKRFaEQHtt8Q@mail.gmail.com/ Cc: stable@kernel.org # 6.4 Fixes: 3872778664e3 ("ext4: Use rbtrees to manage PAs instead of inode i_prealloc_list") Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reviewed-by: Ritesh Harjani (IBM) ritesh.list@gmail.com Tested-by: Ritesh Harjani (IBM) ritesh.list@gmail.com Link: https://lore.kernel.org/r/edd2efda6a83e6343c5ace9deea44813e71dbe20.1690045963.git.ojaswin@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-07-23ext4: fix off by one issue in ext4_mb_choose_next_group_best_avail()Ojaswin Mujoo
In ext4_mb_choose_next_group_best_avail(), we want the start order to be 1 less than goal length and the min_order to be, at max, 1 more than the original length. This commit fixes an off by one issue that arose due to the fact that 1 << fls(n) > (n). After all the processing: order = 1 order below goal len min_order = maximum of the three:- - order - trim_order - 1 order below B2C(s_stripe) - 1 order above original len Cc: stable@kernel.org Fixes: 33122aa930 ("ext4: Add allocation criteria 1.5 (CR1_5)") Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> Link: https://lore.kernel.org/r/20230609103403.112807-1-ojaswin@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-07-23ext4: correct inline offset when handling xattrs in inode bodyEric Whitney
When run on a file system where the inline_data feature has been enabled, xfstests generic/269, generic/270, and generic/476 cause ext4 to emit error messages indicating that inline directory entries are corrupted. This occurs because the inline offset used to locate inline directory entries in the inode body is not updated when an xattr in that shared region is deleted and the region is shifted in memory to recover the space it occupied. If the deleted xattr precedes the system.data attribute, which points to the inline directory entries, that attribute will be moved further up in the region. The inline offset continues to point to whatever is located in system.data's former location, with unfortunate effects when used to access directory entries or (presumably) inline data in the inode body. Cc: stable@kernel.org Signed-off-by: Eric Whitney <enwlinux@gmail.com> Link: https://lore.kernel.org/r/20230522181520.1570360-1-enwlinux@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2023-07-22Merge tag 'powerpc-6.5-4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Reinstate support for little endian ELFv1 binaries, which it turns out still exist in the wild. - Revert a change which used asm goto for WARN_ON/__WARN_FLAGS, as it lead to dead code generation and seemed to trigger compiler bugs in some edge cases. - Fix a deadlock in the pseries VAS code, between live migration and the driver's mmap handler. - Disable KCOV instrumentation in the powerpc KASAN code. Thanks to Andrew Donnellan, Benjamin Gray, Christophe Leroy, Haren Myneni, Russell Currey, and Uwe Kleine-König. * tag 'powerpc-6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: Revert "powerpc/64s: Remove support for ELFv1 little endian userspace" powerpc/kasan: Disable KCOV in KASAN code powerpc/512x: lpbfifo: Convert to platform remove callback returning void powerpc/crypto: Add gitignore for generated P10 AES/GCM .S files Revert "powerpc/bug: Provide better flexibility to WARN_ON/__WARN_FLAGS() with asm goto" powerpc/pseries/vas: Hold mmap_mutex after mmap lock during window close
2023-07-22cifs: update internal module version number for cifs.koSteve French
From 2.43 to 2.44 Signed-off-by: Steve French <stfrench@microsoft.com>
2023-07-22cifs: allow dumping keys for directories tooShyam Prasad N
Dumping the enc/dec keys is a session wide operation. And it should not matter if the ioctl was run on a regular file or a directory. Currently, we obtain the tcon pointer from the cifs file handle. But since there's no dir open call in cifs, this is not populated for dirs. This change allows dumping of session keys using ioctl even for directories. To do this, we'll now get the tcon pointer from the superblock, and not from the file handle. Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-07-22Merge tag 's390-6.5-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Heiko Carstens: - Fix per vma lock fault handling: add missing !(fault & VM_FAULT_ERROR) check to fault handler to prevent error handling for return values that don't indicate an error - Use kfree_sensitive() instead of kfree() in paes crypto code to clear memory that may contain keys before freeing it - Fix reply buffer size calculation for CCA replies in zcrypt device driver * tag 's390-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/zcrypt: fix reply buffer calculations for CCA replies s390/crypto: use kfree_sensitive() instead of kfree() s390/mm: fix per vma lock fault handling
2023-07-22Merge tag 'block-6.5-2023-07-21' of git://git.kernel.dk/linuxLinus Torvalds
Pull block fixes from Jens Axboe: - Fix for loop regressions (Mauricio) - Fix a potential stall with batched wakeups in sbitmap (David) - Fix for stall with recursive plug flushes (Ross) - Skip accounting of empty requests for blk-iocost (Chengming) - Remove a dead field in struct blk_mq_hw_ctx (Chengming) * tag 'block-6.5-2023-07-21' of git://git.kernel.dk/linux: loop: do not enforce max_loop hard limit by (new) default loop: deprecate autoloading callback loop_probe() sbitmap: fix batching wakeup blk-iocost: skip empty flush bio in iocost blk-mq: delete dead struct blk_mq_hw_ctx->queued field blk-mq: Fix stall due to recursive flush plug
2023-07-22Merge tag 'io_uring-6.5-2023-07-21' of git://git.kernel.dk/linuxLinus Torvalds
Pull io_uring fixes from Jens Axboe: - Fix for io-wq not always honoring REQ_F_NOWAIT, if it was set and punted directly (eg via DRAIN) (me) - Capability check fix (Ondrej) - Regression fix for the mmap changes that went into 6.4, which apparently broke IA64 (Helge) * tag 'io_uring-6.5-2023-07-21' of git://git.kernel.dk/linux: ia64: mmap: Consider pgoff when searching for free mapping io_uring: Fix io_uring mmap() by using architecture-provided get_unmapped_area() io_uring: treat -EAGAIN for REQ_F_NOWAIT as final for io-wq io_uring: don't audit the capability check in io_uring_create()
2023-07-22Merge tag 'devicetree-fixes-for-6.5-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Fix moortec,mr75203 schema usage of 'multipleOf' keyword - Fix regression in systems depending on "of-display" device name - Build fix for s390 with CONFIG_PCI=n and OF_EARLY_FLATTREE=y - Drop two obsolete serial .txt bindings * tag 'devicetree-fixes-for-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: serial: Remove obsolete nxp,lpc1850-uart.txt dt-bindings: serial: Remove obsolete cavium-uart.txt dt-bindings: hwmon: moortec,mr75203: fix multipleOf for coefficients of: Preserve "of-display" device name for compatibility of: make OF_EARLY_FLATTREE depend on HAS_IOMEM
2023-07-22Merge tag 'regmap-fix-v6.5-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fixes from Mark Brown: "Three fixes here: - The issues with accounting for register and padding length on raw buses turn out to be quite widespread in custom buses. In order to avoid disturbing anything drop the initial fixes and fall back to a point fix in the SMBus code where the issue was originally noticed, a more substantial refactoring of the API which ensures that all buses make the same assumptions will follow. - The generic regcache code had been forcing on async I/O which did not work with the new maple tree sync code when used with SPI. Since that was mainly for the rbtree cache and the assumptions about hardware that drove the choice are probably not true any more fix this by pushing the enablement of async down into the rbtree code. This probably also makes cache syncs for systems faster though it's not the point. - The test code was triggering use of the rbtree and maple tree caches with dynamic allocation of nodes since all the testing is with RAM backed caches with no I/O performance issues. Just disable the locking in the tests to avoid triggering warnings when allocation debugging is turned on, it's not really what's being tested" * tag 'regmap-fix-v6.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Disable locking for RBTREE and MAPLE unit tests regcache: Push async I/O request down into the rbtree cache regmap: Account for register length in SMBus I/O limits regmap: Drop initial version of maximum transfer length fixes
generated by cgit (git 2.34.1) at 2025-03-25 05:16:15 +0000