Age | Commit message (Collapse) | Author |
|
Backmerging for v5.16-rc5. Resolves a conflict between drm-misc-next
and drm-misc-fixes in the vc4 driver.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Set the maximum register to 0xff so we can dump the registers for this
device in debugfs.
Fixes: a095f15c00e2 ("drm/bridge: add support for sn65dsi86 bridge driver")
Cc: Rob Clark <robdclark@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215002529.382383-1-swboyd@chromium.org
|
|
Move I2C code into its own source file. Makes the mode-setting
code a little less convoluted.
v3:
* fix SPDX tag to say 'SPDX-License-Identifier'
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211206091125.29501-4-tzimmermann@suse.de
|
|
Release the I2C adapter as part of the DRM device cleanup. Remove
ast's dedicated helper for struct drm_connector_funcs.destroy.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211206091125.29501-3-tzimmermann@suse.de
|
|
I2C initialization is allowed to fail. In this case, create a connector
without DDC adapter. The current code would dereference a NULL pointer.
Reading the modes from the connector is supposed to work without I2C
adapter. Add the respective test.
v2:
* init edid to NULL to avoid uninitialized read (Dan)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211206091125.29501-2-tzimmermann@suse.de
|
|
The BT601/BT709 color encoding and limited vs full
range properties were not being exposed, defaulting
always to BT601 limited range.
Expose the parameters and set the registers appropriately.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20211215091739.135042-4-maxime@cerno.tech
|
|
The P030 format, used with the DRM_FORMAT_MOD_BROADCOM_SAND128 modifier,
is a format output by the video decoder on the BCM2711.
Add native support to the KMS planes for that format.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20211215091739.135042-3-maxime@cerno.tech
|
|
Adds a format that is 3 10bit YUV 4:2:0 samples packed into
a 32bit word (with 2 spare bits).
Supported on Broadcom BCM2711 chips.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20211215091739.135042-2-maxime@cerno.tech
|
|
This is the format used by the bootloader framebuffer on Apple ARM64
platforms.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211212062407.138309-4-marcan@marcan.st
|
|
Add XRGB8888 emulation support for devices that can only do XRGB2101010.
This is chiefly useful for simpledrm on Apple devices where the
bootloader-provided framebuffer is 10-bit.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211212062407.138309-3-marcan@marcan.st
|
|
This code is required for both simplefb and simpledrm, so let's move it
into the OF core instead of having it as an ad-hoc initcall in the
drivers.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211212062407.138309-2-marcan@marcan.st
|
|
Add Team Source Display TST043015CMHX 4.3" 480x272 DPI panel support.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211127031909.283383-3-marex@denx.de
|
|
Add Team Source Display TST043015CMHX 4.3" 480x272 DPI panel
compatible string.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211127031909.283383-2-marex@denx.de
|
|
Add vendor prefix for Team Source Display Technology Co., Ltd.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211127031909.283383-1-marex@denx.de
|
|
The OnSemi FIN3385 Parallel-to-LVDS encoder has a dedicated input line to
select input pixel data sampling edge. Add DT property "pclk-sample", not
the same as the one used by display timings but rather the same as used by
media, and configure bus flags based on this DT property.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211017001204.299940-2-marex@denx.de
|
|
select
The OnSemi FIN3385 Parallel-to-LVDS encoder has a dedicated input line to
select input pixel data sampling edge. Add DT property "pclk-sample", not
the same as the one used by display timings but rather the same as used by
media, to define the pixel data sampling edge.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211017001204.299940-1-marex@denx.de
|
|
Several DRM/KMS atomic commits can run in parallel if they affect
different CRTC. These commits share the global HVS state, so we have
some code to make sure we run commits in sequence. This synchronization
code is one of the first thing that runs in vc4_atomic_commit_tail().
Another constraints we have is that we need to make sure the HVS clock
gets a boost during the commit. That code relies on clk_set_min_rate and
will remove the old minimum and set a new one. We also need another,
temporary, minimum for the duration of the commit.
The algorithm is thus to set a temporary minimum, drop the previous
one, do the commit, and finally set the minimum for the current mode.
However, the part that sets the temporary minimum and drops the older
one runs before the commit synchronization code.
Thus, under the proper conditions, we can end up mixing up the minimums
and ending up with the wrong one for our current step.
To avoid it, let's move the clock setup in the protected section.
Fixes: d7d96c00e585 ("drm/vc4: hvs: Boost the core clock during modeset")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Tested-by: Jian-Hong Pan <jhp@endlessos.org>
[danvet: re-apply this from 0c980a006d3f ("drm/vc4: kms: Wait for the
commit before increasing our clock rate") because I lost that part in
my merge resolution in 99b03ca651f1 ("Merge v5.16-rc5 into drm-next")]
Fixes: 99b03ca651f1 ("Merge v5.16-rc5 into drm-next")
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://lore.kernel.org/r/20211117094527.146275-2-maxime@cerno.tech
|
|
There are a few details specific to the GETFB2 IOCTL.
It's not immediately clear how user-space should check for the
number of planes. Suggest using the handles field or the pitches
field.
The modifier array is filled with zeroes, ie. DRM_FORMAT_MOD_LINEAR.
So explicitly tell user-space to not look at it unless the flag is
set.
Changes in v2 (Daniel):
- Mention that handles should be used to compute the number of planes,
and only refer to pitches as a fallback.
- Reword bit about undefined modifier.
Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211123112400.22245-1-contact@emersion.fr
|
|
Thomas Zimmermann requested a fixes backmerge, specifically also for
96c5f82ef0a1 ("drm/vc4: fix error code in vc4_create_object()")
Just a bunch of adjacent changes conflicts, even the big pile of them
in vc4.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 5.16-rc5. They include:
- gadget driver fixes for reported issues
- xhci fixes for reported problems.
- config endpoint parsing fixes for where we got bitfields wrong
Most of these have been in linux-next, the remaining few were not, but
got lots of local testing in my systems and in some cloud testing
infrastructures"
* tag 'usb-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: core: config: using bit mask instead of individual bits
usb: core: config: fix validation of wMaxPacketValue entries
USB: gadget: zero allocate endpoint 0 buffers
USB: gadget: detect too-big endpoint 0 requests
xhci: avoid race between disable slot command and host runtime suspend
xhci: Remove CONFIG_USB_DEFAULT_PERSIST to prevent xHCI from runtime suspending
Revert "usb: dwc3: dwc3-qcom: Enable tx-fifo-resize property by default"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a bunch of small char/misc and other driver subsystem fixes.
Included in here are:
- iio driver fixes for reported problems
- phy driver fixes for a number of reported problems
- mhi resume bugfix for broken hardware
- nvmem driver fix
- rtsx driver fix for irq issues
- fastrpc packet parsing fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (33 commits)
bus: mhi: core: Add support for forced PM resume
iio: trigger: stm32-timer: fix MODULE_ALIAS
misc: rtsx: Avoid mangling IRQ during runtime PM
nvmem: eeprom: at25: fix FRAM byte_len
misc: fastrpc: fix improper packet size calculation
MAINTAINERS: add maintainer for Qualcomm FastRPC driver
bus: mhi: pci_generic: Fix device recovery failed issue
iio: adc: stm32: fix null pointer on defer_probe error
phy: HiSilicon: Fix copy and paste bug in error handling
dt-bindings: phy: zynqmp-psgtr: fix USB phy name
phy: ti: omap-usb2: Fix the kernel-doc style
phy: qualcomm: ipq806x-usb: Fix kernel-doc style
iio: at91-sama5d2: Fix incorrect sign extension
iio: adc: axp20x_adc: fix charging current reporting on AXP22x
iio: gyro: adxrs290: fix data signedness
phy: ti: tusb1210: Fix the kernel-doc warn
phy: qualcomm: usb-hsic: Fix the kernel-doc warn
phy: qualcomm: qmp: Add missing struct documentation
phy: mvebu-cp110-utmi: Fix kernel-doc warns
iio: ad7768-1: Call iio_trigger_notify_done() on error
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Two fixes for clock chip drivers:
- A regression fix for the Designware APB timer. A recent change to
the error checking code transformed the error condition wrongly so
it turned into a fail if good condition.
- Fix a clang build fail of the ARM architected timer driver"
* tag 'timers-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/arm_arch_timer: Force inlining of erratum_set_next_event_generic()
clocksource/drivers/dw_apb_timer_of: Fix probe failure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of interrupt chip driver fixes:
- Fix the multi vector MSI allocation on Armada 370XP
- Do interrupt acknowledgement correctly in the aspeed-scu driver
- Make the IPR register offset correct in the NVIC driver
- Make redistribution table flushing correct by issueing a SYNC
command to ensure that the invalidation command has been executed
- Plug a device tree node reference leak in the bcm7210-l2 driver
- Trivial fixes in the MIPS GIC and the Apple AIC drivers"
* tag 'irq-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/irq-bcm7120-l2: Add put_device() after of_find_device_by_node()
irqchip/irq-gic-v3-its.c: Force synchronisation when issuing INVALL
irqchip/apple-aic: Mark aic_init_smp() as __init
irqchip: nvic: Fix offset for Interrupt Priority Offsets
irqchip/mips-gic: Use bitfield helpers
irqchip/aspeed-scu: Replace update_bits with write_bits.
irqchip/armada-370-xp: Fix support for Multi-MSI interrupts
irqchip/armada-370-xp: Fix return value of armada_370_xp_msi_alloc()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"A single fix for the x86 scheduler topology:
Using cluster topology on hybrid CPUs, e.g. Alder Lake, biases the
scheduler towards the ATOM cluster as that has more total capacity.
Use selection based on CPU priority instead"
* tag 'sched-urgent-2021-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched,x86: Don't use cluster topology for x86 hybrid CPUs
|
|
Pull csky from Guo Ren:
"Only one fix for csky: fix fpu config macro"
* tag 'csky-for-linus-5.16-rc5' of git://github.com/c-sky/csky-linux:
csky: fix typo of fpu config macro
|
|
Using standard USB_EP_MAXP_MULT_MASK instead of individual bits for
extracting multiple-transactions bits from wMaxPacketSize value.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20211210085219.16796-2-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The checks performed by commit aed9d65ac327 ("USB: validate
wMaxPacketValue entries in endpoint descriptors") require that initial
value of the maxp variable contains both maximum packet size bits
(10..0) and multiple-transactions bits (12..11). However, the existing
code assings only the maximum packet size bits. This patch assigns all
bits of wMaxPacketSize to the variable.
Fixes: aed9d65ac327 ("USB: validate wMaxPacketValue entries in endpoint descriptors")
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/20211210085219.16796-1-pavel.hofman@ivitera.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Under some conditions, USB gadget devices can show allocated buffer
contents to a host. Fix this up by zero-allocating them so that any
extra data will all just be zeros.
Reported-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Tested-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Sometimes USB hosts can ask for buffers that are too large from endpoint
0, which should not be allowed. If this happens for OUT requests, stall
the endpoint, but for IN requests, trim the request size to the endpoint
buffer size.
Co-developed-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Four fixes, all in drivers.
Three are small and obvious, the qedi one is a bit larger but also
pretty obvious"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Format log strings only if needed
scsi: scsi_debug: Fix buffer size of REPORT ZONES command
scsi: qedi: Fix cmd_cleanup_cmpl counter mismatch issue
scsi: pm80xx: Do not call scsi_remove_host() in pm8001_alloc()
|
|
Pull xfs fix from Darrick Wong:
"This fixes a race between a readonly remount process and other
processes that hold a file IOLOCK on files that previously experienced
copy on write, that could result in severe filesystem corruption if
the filesystem is then remounted rw.
I think this is fairly rare (since the only reliable reproducer I have
that fits the second criteria is the experimental xfs_scrub program),
but the race is clear, so we still need to fix this.
Summary:
- Fix a data corruption vector that can result from the ro remount
process failing to clear all speculative preallocations from files
and the rw remount process not noticing the incomplete cleanup"
* tag 'xfs-5.16-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: remove all COW fork extents when remounting readonly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu fixes from Dennis Zhou:
"This contains a fix for SMP && !MMU archs for percpu which has been
tested by arm and sh. It seems in the past they have gotten away with
it due to mapping of vm functions to km functions, but this fell apart
a few releases ago and was just reported recently.
The other is just a minor dependency clean up.
I think queued up right now by Andrew is a fix in percpu that papers
of what seems to be a bug in hotplug for a special situation with
memoryless nodes. Michal Hocko is digging into it further"
* 'for-5.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
percpu_ref: Replace kernel.h with the necessary inclusions
percpu: km: ensure it is used with NOMMU (either UP or SMP)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Prevent out-of-bounds access to per sample registers.
- Fix NULL vs IS_ERR_OR_NULL() checking on the python binding.
- Intel PT fixes, half of those are one-liners:
- Fix some PGE (packet generation enable/control flow packets) usage.
- Fix sync state when a PSB (synchronization) packet is found.
- Fix intel_pt_fup_event() assumptions about setting state type.
- Fix state setting when receiving overflow (OVF) packet.
- Fix next 'err' value, walking trace.
- Fix missing 'instruction' events with 'q' option.
- Fix error timestamp setting on the decoder error path.
* tag 'perf-tools-fixes-for-v5.16-2021-12-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf python: Fix NULL vs IS_ERR_OR_NULL() checking
perf intel-pt: Fix error timestamp setting on the decoder error path
perf intel-pt: Fix missing 'instruction' events with 'q' option
perf intel-pt: Fix next 'err' value, walking trace
perf intel-pt: Fix state setting when receiving overflow (OVF) packet
perf intel-pt: Fix intel_pt_fup_event() assumptions about setting state type
perf intel-pt: Fix sync state when a PSB (synchronization) packet is found
perf intel-pt: Fix some PGE (packet generation enable/control flow packets) usage
perf tools: Prevent out-of-bounds access to registers
|
|
Pull block fixes from Jens Axboe:
"A few block fixes that should go into this release:
- NVMe pull request:
- set ana_log_size to 0 after freeing ana_log_buf (Hou Tao)
- show subsys nqn for duplicate cntlids (Keith Busch)
- disable namespace access for unsupported metadata (Keith
Busch)
- report write pointer for a full zone as zone start + zone len
(Niklas Cassel)
- fix use after free when disconnecting a reconnecting ctrl
(Ruozhu Li)
- fix a list corruption in nvmet-tcp (Sagi Grimberg)
- Fix for a regression on DIO single bio async IO (Pavel)
- ioprio seteuid fix (Davidlohr)
- mtd fix that subsequently got reverted as it was broken, will get
re-done and submitted for the next round
- Two MD fixes via Song (Markus, zhangyue)"
* tag 'block-5.16-2021-12-10' of git://git.kernel.dk/linux-block:
Revert "mtd_blkdevs: don't scan partitions for plain mtdblock"
block: fix ioprio_get(IOPRIO_WHO_PGRP) vs setuid(2)
md: fix double free of mddev->private in autorun_array()
md: fix update super 1.0 on rdev size change
nvmet-tcp: fix possible list corruption for unexpected command failure
block: fix single bio async DIO error handling
nvme: fix use after free when disconnecting a reconnecting ctrl
nvme-multipath: set ana_log_size to 0 after free ana_log_buf
mtd_blkdevs: don't scan partitions for plain mtdblock
nvme: report write pointer for a full zone as zone start + zone len
nvme: disable namespace access for unsupported metadata
nvme: show subsys nqn for duplicate cntlids
|
|
Pull io_uring fixes from Jens Axboe:
"A few fixes that are all bound for stable:
- Two syzbot reports for io-wq that turned out to be separate fixes,
but ultimately very closely related
- io_uring task_work running on cancelations"
* tag 'io_uring-5.16-2021-12-10' of git://git.kernel.dk/linux-block:
io-wq: check for wq exit after adding new worker task_work
io_uring: ensure task_work gets run as part of cancelations
io-wq: remove spurious bit clear on task_work addition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two more I2C driver bugfixes"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mpc: Use atomic read and fix break condition
i2c: virtio: fix completion handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk driver fixes from Stephen Boyd:
- Fix qcom mux logic to look at the proper parent table member. Luckily
this clk type isn't very common.
- Don't kill clks on qcom systems that use Trion PLLs that are enabled
out of the bootloader. We will simply skip programming the PLL rate
if it's already done.
- Use the proper clk_ops for the qcom sm6125 ICE clks.
- Use module_platform_driver() in i.MX as it can be a module.
- Fix a UAF in the versatile clk driver on an error path.
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: versatile: clk-icst: use after free on error path
clk: qcom: sm6125-gcc: Swap ops of ice and apps on sdcc1
clk: imx: use module_platform_driver
clk: qcom: clk-alpha-pll: Don't reconfigure running Trion
clk: qcom: regmap-mux: fix parent clock lookup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Revert schema checks on %.dtb targets. This was problematic for some
external build tools.
- A few DT binding example fixes
- Add back dropped 'enet-phy-lane-no-swap' Ethernet PHY property
- Drop erroneous if/then schema in nxp,imx7-mipi-csi2
- Add a quirk to fix some interrupt controllers use of 'interrupt-map'
* tag 'devicetree-fixes-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
Revert "kbuild: Enable DT schema checks for %.dtb targets"
dt-bindings: bq25980: Fixup the example
dt-bindings: input: gpio-keys: Fix interrupts in example
dt-bindings: net: Reintroduce PHY no lane swap binding
dt-bindings: media: nxp,imx7-mipi-csi2: Drop bad if/then schema
of/irq: Add a quirk for controllers with their own definition of interrupt-map
dt-bindings: iio: adc: exynos-adc: Fix node name in example
|
|
Merge misc fixes from Andrew Morton:
"21 patches.
Subsystems affected by this patch series: MAINTAINERS, mailmap, and mm
(mlock, pagecache, damon, slub, memcg, hugetlb, and pagecache)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (21 commits)
mm: bdi: initialize bdi_min_ratio when bdi is unregistered
hugetlbfs: fix issue of preallocation of gigantic pages can't work
mm/memcg: relocate mod_objcg_mlstate(), get_obj_stock() and put_obj_stock()
mm/slub: fix endianness bug for alloc/free_traces attributes
selftests/damon: split test cases
selftests/damon: test debugfs file reads/writes with huge count
selftests/damon: test wrong DAMOS condition ranges input
selftests/damon: test DAMON enabling with empty target_ids case
selftests/damon: skip test if DAMON is running
mm/damon/vaddr-test: remove unnecessary variables
mm/damon/vaddr-test: split a test function having >1024 bytes frame size
mm/damon/vaddr: remove an unnecessary warning message
mm/damon/core: remove unnecessary error messages
mm/damon/dbgfs: remove an unnecessary error message
mm/damon/core: use better timer mechanisms selection threshold
mm/damon/core: fix fake load reports due to uninterruptible sleeps
timers: implement usleep_idle_range()
filemap: remove PageHWPoison check from next_uptodate_page()
mailmap: update email address for Guo Ren
MAINTAINERS: update kdump maintainers
...
|
|
https://git.linaro.org/people/daniel.lezcano/linux into timers/urgent
Pull timer fixes from Daniel Lezcano:
- Fix build error with clang and some kernel configuration on the
arm64 architected timer by inlining the
erratum_set_next_event_generic() function (Marc Zyngier)
- Fix probe error on the dw_apb_timer_of driver by fixing the
incorrect condition previously introduced (Alexey Sheplyakov)
Link: https://lore.kernel.org/r/429b796d-9395-4ca8-81f3-30911f80a9a9@linaro.org
|
|
The function trace_event__tp_format_id may return ERR_PTR(-ENOMEM). Use
IS_ERR_OR_NULL to check tp_format.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Link: http://lore.kernel.org/lkml/20211211053856.19827-1-linmq006@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
An error timestamp shows the last known timestamp for the queue, but this
is not updated on the error path. Fix by setting it.
Fixes: f4aa081949e7b6 ("perf tools: Add Intel PT decoder")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
FUP packets contain IP information, which makes them also an 'instruction'
event in 'hop' mode i.e. the itrace 'q' option. That wasn't happening, so
restructure the logic so that FUP events are added along with appropriate
'instruction' and 'branch' events.
Fixes: 7c1b16ba0e26e6 ("perf intel-pt: Add support for decoding FUP/TIP only")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Code after label 'next:' in intel_pt_walk_trace() assumes 'err' is zero,
but it may not be, if arrived at via a 'goto'. Ensure it is zero.
Fixes: 7c1b16ba0e26e6 ("perf intel-pt: Add support for decoding FUP/TIP only")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
An overflow (OVF packet) is treated as an error because it represents a
loss of trace data, but there is no loss of synchronization, so the packet
state should be INTEL_PT_STATE_IN_SYNC not INTEL_PT_STATE_ERR_RESYNC.
To support that, some additional variables must be reset, and the FUP
packet that may follow OVF is treated as an FUP event.
Fixes: f4aa081949e7b6 ("perf tools: Add Intel PT decoder")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
intel_pt_fup_event() assumes it can overwrite the state type if there has
been an FUP event, but this is an unnecessary and unexpected constraint on
callers.
Fix by touching only the state type flags that are affected by an FUP
event.
Fixes: a472e65fc490a ("perf intel-pt: Add decoder support for ptwrite and power event packets")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When syncing, it may be that branch packet generation is not enabled at
that point, in which case there will not immediately be a control-flow
packet, so some packets before a control flow packet turns up, get
ignored. However, the decoder is in sync as soon as a PSB is found, so
the state should be set accordingly.
Fixes: f4aa081949e7b6 ("perf tools: Add Intel PT decoder")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
usage
Packet generation enable (PGE) refers to whether control flow (COFI)
packets are being produced.
PGE may be false even when branch-tracing is enabled, due to being
out-of-context, or outside a filter address range. Fix some missing PGE
usage.
Fixes: 7c1b16ba0e26e6 ("perf intel-pt: Add support for decoding FUP/TIP only")
Fixes: 839598176b0554 ("perf intel-pt: Allow decoding with branch tracing disabled")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The size of the cache of register values is arch-dependant
(PERF_REGS_MAX). This has the potential of causing an out-of-bounds
access in the function "perf_reg_value" if the local architecture
contains less registers than the one the perf.data file was recorded on.
Since the maximum number of registers is bound by the bitmask "u64
cache_mask", and the size of the cache when running under x86 systems is
64 already, fix the size to 64 and add a range-check to the function
"perf_reg_value" to prevent out-of-bounds access.
Reported-by: Alexandre Truong <alexandre.truong@arm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-csky@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Link: https://lore.kernel.org/r/20211201123334.679131-2-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|