summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-04-13scsi: lpfc: Fix NMI crash during rmmod due to circular hbalock dependencyJames Smart
Remove hbalock dependency for lpfc_abts_els_sgl_list and lpfc_abts_nvmet_ctx_list. The lists are adaquately synchronized with the sgl_list_lock and abts_nvmet_buf_list_lock. Link: https://lore.kernel.org/r/20210412013127.2387-5-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: lpfc: Fix reference counting errors in lpfc_cmpl_els_rsp()James Smart
Call traces are being seen that result from a nodelist structure ref counting error. They are typically seen after transmission of an LS_RJT ELS response. Aged code in lpfc_cmpl_els_rsp() calls lpfc_nlp_not_used() which, if the ndlp reference count is exactly 1, will decrement the reference count. Previously lpfc_nlp_put() was within lpfc_els_free_iocb(), and the 'put' within the free would only be invoked if cmdiocb->context1 was not NULL. Since the nodelist structure reference count is decremented when exiting lpfc_cmpl_els_rsp() the lpfc_nlp_not_used() calls are no longer required. Calling them is causing the reference count issue. Fix by removing the lpfc_nlp_not_used() calls. Link: https://lore.kernel.org/r/20210412013127.2387-4-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: lpfc: Fix crash when a REG_RPI mailbox fails triggering a LOGO responseJames Smart
Fix a crash caused by a double put on the node when the driver completed an ACC for an unsolicted abort on the same node. The second put was executed by lpfc_nlp_not_used() and is wrong because the completion routine executes the nlp_put when the iocbq was released. Additionally, the driver is issuing a LOGO then immediately calls lpfc_nlp_set_state to put the node into NPR. This call does nothing. Remove the lpfc_nlp_not_used call and additional set_state in the completion routine. Remove the lpfc_nlp_set_state post issue_logo. Isn't necessary. Link: https://lore.kernel.org/r/20210412013127.2387-3-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: lpfc: Fix rmmod crash due to bad ring pointers to abort_iotagJames Smart
Rmmod on SLI-4 adapters is sometimes hitting a bad ptr dereference in lpfc_els_free_iocb(). A prior patch refactored the lpfc_sli_abort_iocb() routine. One of the changes was to convert from building/sending an abort within the routine to using a common routine. The reworked routine passes, without modification, the pring ptr to the new common routine. The older routine had logic to check SLI-3 vs SLI-4 and adapt the pring ptr if necessary as callers were passing SLI-3 pointers even when not on an SLI-4 adapter. The new routine is missing this check and adapt, so the SLI-3 ring pointers are being used in SLI-4 paths. Fix by cleaning up the calling routines. In review, there is no need to pass the ring ptr argument to abort_iocb at all. The routine can look at the adapter type itself and reference the proper ring. Link: https://lore.kernel.org/r/20210412013127.2387-2-jsmart2021@gmail.com Fixes: db7531d2b377 ("scsi: lpfc: Convert abort handling to SLI-3 and SLI-4 handlers") Cc: <stable@vger.kernel.org> # v5.11+ Co-developed-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: Justin Tee <justin.tee@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: isci: Remove unnecessary struct declarationWan Jiabing
struct sci_phy_proto was already defined on line 142. The declaration here is unnecessary. Remove it. Link: https://lore.kernel.org/r/20210406105913.676746-1-wanjiabing@vivo.com Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: message: fusion: Remove unused local variable 'vtarget'Jiapeng Chong
Fix the following gcc warning: drivers/message/fusion/mptsas.c:783:14: warning: variable ‘vtarget’ set but not used [-Wunused-but-set-variable]. Link: https://lore.kernel.org/r/1618207146-96542-1-git-send-email-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: message: fusion: Remove unused local variable 'status'Jiapeng Chong
Fix the following gcc warning: drivers/message/fusion/mptbase.c:3087:9: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]. Link: https://lore.kernel.org/r/1617872780-126448-1-git-send-email-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: message: fusion: Remove unused local variable 'port'Zhen Lei
Fixes the following W=1 kernel build warning: drivers/message/fusion/mptctl.c: In function ‘mptctl_gettargetinfo drivers/message/fusion/mptctl.c:1372:7: warning: variable ‘port’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20210408061851.3089-3-thunder.leizhen@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: message: fusion: Remove unused local variable 'time_count'Zhen Lei
Fixes the following W=1 kernel build warning: drivers/message/fusion/mptctl.c: In function ‘mptctl_do_taskmgmt: drivers/message/fusion/mptctl.c:324:17: warning: variable ‘time_count’ set but not used [-Wunused-but-set-variable] Link: https://lore.kernel.org/r/20210408061851.3089-2-thunder.leizhen@huawei.com Fixes: 7d757f185540 ("[SCSI] mptfusion: Updated SCSI IO IOCTL error handling.") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: qla4xxx: Remove unneeded if-null-free checkQiheng Lin
Eliminate the following coccicheck warning: drivers/scsi/qla4xxx/ql4_os.c:4175:2-7: WARNING: NULL check before some freeing functions is not needed. drivers/scsi/qla4xxx/ql4_os.c:4196:2-7: WARNING: NULL check before some freeing functions is not needed. drivers/scsi/qla4xxx/ql4_os.c:4215:2-7: WARNING: NULL check before some freeing functions is not needed. drivers/scsi/qla4xxx/ql4_os.c:6400:2-7: WARNING: NULL check before some freeing functions is not needed. drivers/scsi/qla4xxx/ql4_os.c:6402:2-7: WARNING: NULL check before some freeing functions is not needed. drivers/scsi/qla4xxx/ql4_os.c:6555:2-7: WARNING: NULL check before some freeing functions is not needed. drivers/scsi/qla4xxx/ql4_os.c:6557:2-7: WARNING: NULL check before some freeing functions is not needed. drivers/scsi/qla4xxx/ql4_os.c:7838:2-7: WARNING: NULL check before some freeing functions is not needed. drivers/scsi/qla4xxx/ql4_os.c:7840:2-7: WARNING: NULL check before some freeing functions is not needed. Link: https://lore.kernel.org/r/20210409120345.6447-1-linqiheng@huawei.com Signed-off-by: Qiheng Lin <linqiheng@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: qla2xxx: Reuse existing error handling pathChristophe JAILLET
There is no need to duplicate code, use the existing error handling path to free resources. This is more future-proof. Link: https://lore.kernel.org/r/6973844a1532ec2dc8e86f3533362e79d78ed774.1618132821.git.christophe.jaillet@wanadoo.fr Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: qla2xxx: Remove unneeded if-null-free checkQiheng Lin
Eliminate the following coccicheck warning: drivers/scsi/qla2xxx/qla_os.c:4622:2-7: WARNING: NULL check before some freeing functions is not needed. drivers/scsi/qla2xxx/qla_os.c:4637:3-8: WARNING: NULL check before some freeing functions is not needed. Link: https://lore.kernel.org/r/20210409120925.7122-1-linqiheng@huawei.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Qiheng Lin <linqiheng@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: mpt3sas: Fix out-of-bounds warnings in _ctl_addnl_diag_queryGustavo A. R. Silva
Fix the following out-of-bounds warnings by embedding existing struct htb_rel_query into struct mpt3_addnl_diag_query, instead of duplicating its members: include/linux/fortify-string.h:20:29: warning: '__builtin_memcpy' offset [19, 32] from the object at 'karg' is out of the bounds of referenced subobject 'buffer_rel_condition' with type 'short unsigned int' at offset 16 [-Warray-bounds] include/linux/fortify-string.h:22:29: warning: '__builtin_memset' offset [19, 32] from the object at 'karg' is out of the bounds of referenced subobject 'buffer_rel_condition' with type 'short unsigned int' at offset 16 [-Warray-bounds] The problem is that the original code is trying to copy data into a bunch of struct members adjacent to each other in a single call to memcpy(). All those members are exactly the same contained in struct htb_rel_query, so instead of duplicating them into struct mpt3_addnl_diag_query, replace them with new member rel_query of type struct htb_rel_query. So, now that this new object is introduced, memcpy() doesn't overrun the length of &karg.buffer_rel_condition, because the address of the new struct object _rel_query_ is used as destination, instead. The same issue is present when calling memset(), and it is fixed with this same approach. Below is a comparison of struct mpt3_addnl_diag_query, before and after this change (the size and cachelines remain the same): $ pahole -C mpt3_addnl_diag_query drivers/scsi/mpt3sas/mpt3sas_ctl.o struct mpt3_addnl_diag_query { struct mpt3_ioctl_header hdr; /* 0 12 */ uint32_t unique_id; /* 12 4 */ uint16_t buffer_rel_condition; /* 16 2 */ uint16_t reserved1; /* 18 2 */ uint32_t trigger_type; /* 20 4 */ uint32_t trigger_info_dwords[2]; /* 24 8 */ uint32_t reserved2[2]; /* 32 8 */ /* size: 40, cachelines: 1, members: 7 */ /* last cacheline: 40 bytes */ }; $ pahole -C mpt3_addnl_diag_query drivers/scsi/mpt3sas/mpt3sas_ctl.o struct mpt3_addnl_diag_query { struct mpt3_ioctl_header hdr; /* 0 12 */ uint32_t unique_id; /* 12 4 */ struct htb_rel_query rel_query; /* 16 16 */ uint32_t reserved2[2]; /* 32 8 */ /* size: 40, cachelines: 1, members: 4 */ /* last cacheline: 40 bytes */ }; Also, this helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). Link: https://github.com/KSPP/linux/issues/109 Link: https://lore.kernel.org/lkml/60659889.bJJILx2THu3hlpxW%25lkp@intel.com/ Link: https://lore.kernel.org/r/20210401162054.GA397186@embeddedor Build-tested-by: kernel test robot <lkp@intel.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: qedf: Use devlink to report errors and recoveryJaved Hasan
Use devlink_health_report() to push error indications. Implement this in qede via a callback function to make it possible to reuse it for other drivers sitting on top of qed in future. Also remove forcible recovery trigger and put it as a normal devlink callback in qed module. This allows user to enable/disable it via: devlink health set pci/xxxx:xx:xx.x reporter fw_fatal auto_recover false Link: https://lore.kernel.org/r/20210331164917.24662-3-jhasan@marvell.com Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: qedf: Enable devlink supportJaved Hasan
Devlink instance lifetime was linked to qed_dev object. That caused devlink to be recreated on each recovery. Change it by making higher level driver (qede) responsible for lifetime management. This way devlink survives recoveries. qede now stores devlink structure pointer as a part of its device object, devlink private data contains a linkage structure, qed_devlink. Link: https://lore.kernel.org/r/20210331164917.24662-2-jhasan@marvell.com Signed-off-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: sni_53c710: Add IRQ checkSergey Shtylyov
The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to request_irq() (which takes *unsigned* IRQ #s), causing it to fail with -EINVAL (overridden by -ENODEV further below). Stop calling request_irq() with the invalid IRQ #s. Link: https://lore.kernel.org/r/8f4b8fa5-8251-b977-70a1-9099bcb4bb17@omprussia.ru Fixes: c27d85f3f3c5 ("[SCSI] SNI RM 53c710 driver") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: sun3x_esp: Add IRQ checkSergey Shtylyov
The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding the real error code. Stop calling request_irq() with the invalid IRQ #s. Link: https://lore.kernel.org/r/363eb4c8-a3bf-4dc9-2a9e-90f349030a15@omprussia.ru Fixes: 0bb67f181834 ("[SCSI] sun3x_esp: convert to esp_scsi") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: jazz_esp: Add IRQ checkSergey Shtylyov
The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to request_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding the real error code. Stop calling request_irq() with the invalid IRQ #s. Link: https://lore.kernel.org/r/594aa9ae-2215-49f6-f73c-33bd38989912@omprussia.ru Fixes: 352e921f0dd4 ("[SCSI] jazz_esp: converted to use esp_core") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: hisi_sas: Fix IRQ checksSergey Shtylyov
Commit df2d8213d9e3 ("hisi_sas: use platform_get_irq()") failed to take into account that irq_of_parse_and_map() and platform_get_irq() have a different way of indicating an error: the former returns 0 and the latter returns a negative error code. Fix up the IRQ checks! Link: https://lore.kernel.org/r/810f26d3-908b-1d6b-dc5c-40019726baca@omprussia.ru Fixes: df2d8213d9e3 ("hisi_sas: use platform_get_irq()") Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-13scsi: ufs: ufshcd-pltfrm: Fix deferred probingSergey Shtylyov
The driver overrides the error codes returned by platform_get_irq() to -ENODEV, so if it returns -EPROBE_DEFER, the driver would fail the probe permanently instead of the deferred probing. Propagate the error code upstream as it should have been done from the start... Link: https://lore.kernel.org/r/420364ca-614a-45e3-4e35-0e0653c7bc53@omprussia.ru Fixes: 2953f850c3b8 ("[SCSI] ufs: use devres functions for ufshcd") Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: snic: Convert to DEFINE_SHOW_ATTRIBUTE()dingsenjie
Use DEFINE_SHOW_ATTRIBUTE() macro to simplify the code. Link: https://lore.kernel.org/r/20210331065326.18804-1-dingsenjie@163.com Signed-off-by: dingsenjie <dingsenjie@yulong.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: ufs: ufs-qcom: Remove redundant dev_err() call in ufs_qcom_init()Ye Bin
There is a error message within devm_ioremap_resource() already, so remove the dev_err() call to avoid redundant error message. Link: https://lore.kernel.org/r/20210409075522.2111083-1-yebin10@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: hisi_sas: Print SATA device SAS address for soft reset failureLuo Jiaxing
Add (pseudo) SAS address for ATA software reset failure log to assist in debugging. Link: https://lore.kernel.org/r/1617709711-195853-7-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: hisi_sas: Warn in v3 hw channel interrupt handler when status reg clearedLuo Jiaxing
If a channel interrupt occurs without any status bit set, the handler will return directly. However, if such redundant interrupts are received, it's better to check what happen, so add logs for this. Link: https://lore.kernel.org/r/1617709711-195853-6-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Yihang Li <liyihang6@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: hisi_sas: Directly snapshot registers when executing a resetJianqin Xie
The debugfs snapshot should be executed before the reset occurs to ensure that the register contents are saved properly. As such, it is incorrect to queue the debugfs dump when running a reset as the reset will occur prior to the snapshot work item is handler. Therefore, directly snapshot registers in the reset work handler. Link: https://lore.kernel.org/r/1617709711-195853-5-git-send-email-john.garry@huawei.com Signed-off-by: Jianqin Xie <xiejianqin@hisilicon.com> Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: hisi_sas: Call sas_unregister_ha() to roll back if .hw_init() failsXiang Chen
Function sas_unregister_ha() needs to be called to roll back if hisi_hba->hw->hw_init() fails in function hisi_sas_probe() or hisi_sas_v3_probe(). Make that change. Link: https://lore.kernel.org/r/1617709711-195853-4-git-send-email-john.garry@huawei.com Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: hisi_sas: Print SAS address for v3 hw erroneous completion printLuo Jiaxing
To help debugging efforts, print the device SAS address for v3 hw erroneous completion log. Here is an example print: hisi_sas_v3_hw 0000:b4:02.0: erroneous completion iptt=2193 task=000000002b0c13f8 dev id=17 addr=570fd45f9d17b001 Link: https://lore.kernel.org/r/1617709711-195853-3-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: hisi_sas: Delete some unused callbacksLuo Jiaxing
The debugfs code has been relocated to v3 hw driver, so delete unused struct hisi_sas_hw function pointers snapshot_{prepare, restore}. Link: https://lore.kernel.org/r/1617709711-195853-2-git-send-email-john.garry@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: pm8001: Clean up open bracesLuo Jiaxing
checkpatch reports the following: ERROR: that open brace { should be on the previous line +static struct error_fw flash_error_table[] = +{ Fix a couple of instances of misplaced open bracket. Link: https://lore.kernel.org/r/1617886593-36421-3-git-send-email-luojiaxing@huawei.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Jianqin Xie <xiejianqin@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: pm8001: Clean up white spaceLuo Jiaxing
checkpatch reports the following: ERROR: space prohibited before that ',' (ctx:WxW) +int pm8001_mpi_general_event(struct pm8001_hba_info *pm8001_ha , void *piomb); Remove unnecessary whitespace. Link: https://lore.kernel.org/r/1617886593-36421-2-git-send-email-luojiaxing@huawei.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Jianqin Xie <xiejianqin@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: pm80xx: Fix potential infinite loopColin Ian King
The for-loop iterates with a u8 loop counter i and compares this with the loop upper limit of pm8001_ha->max_q_num which is a u32 type. There is a potential infinite loop if pm8001_ha->max_q_num is larger than the u8 loop counter. Fix this by making the loop counter the same type as pm8001_ha->max_q_num. [mkp: this is purely theoretical, max_q_num is currently limited to 64] Link: https://lore.kernel.org/r/20210407135840.494747-1-colin.king@canonical.com Fixes: 65df7d1986a1 ("scsi: pm80xx: Fix chip initialization failure") Addresses-Coverity: ("Infinite loop") Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: pm80xx: Remove busy wait from mpi_uninit_check()Igor Pylypiv
mpi_uninit_check() is not being called in an atomic context. The only caller of mpi_uninit_check() is pm80xx_chip_soft_rst(). Callers of pm80xx_chip_soft_rst(): - pm8001_ioctl_soft_reset() - pm8001_pci_probe() - pm8001_pci_remove() - pm8001_pci_suspend() - pm8001_pci_resume() There was a similar fix for mpi_init_check() in commit d71023af4bec ("scsi: pm80xx: Do not busy wait in MPI init check") Link: https://lore.kernel.org/r/20210406180534.1924345-3-ipylypiv@google.com Reviewed-by: Vishakha Channapattan <vishakhavc@google.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: pm80xx: Increase timeout for pm80xx mpi_uninit_check()Igor Pylypiv
The mpi_uninit_check() takes longer for inbound doorbell register to be cleared. Increase the timeout substantially so that the driver does not fail to load. Previously, the inbound doorbell wait time was mistakenly increased in the mpi_init_check() instead of mpi_uninit_check(). It is okay to leave the mpi_init_check() wait time as-is as these are timeout values and if there is a failure, waiting longer is not an issue. Link: https://lore.kernel.org/r/20210406180534.1924345-2-ipylypiv@google.com Fixes: e90e236250e9 ("scsi: pm80xx: Increase timeout for pm80xx mpi_uninit_check") Reviewed-by: Vishakha Channapattan <vishakhavc@google.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: target: tcmu: Make data_pages_per_blk changeable via configfsBodo Stroesser
Make data_pages_per_blk changeable similar to the way it is done for max_data_area_mb. One can change the value by typing: echo "data_pages_per_blk=N" >control The value is printed when doing: cat info In addition, a new readonly attribute 'data_pages_per_blk' returns the value on read. Link: https://lore.kernel.org/r/20210324195758.2021-7-bostroesser@gmail.com Signed-off-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: target: tcmu: Replace block size definitions with new udev membersBodo Stroesser
Replace DATA_PAGES_PER_BLK and DATA_BLOCK_SIZE with new struct elements tcmu_dev->data_pages_per_blk and tcmu_dev->data_blk_size. These new variables are still loaded with constant definition DATA_PAGES_PER_BLK_DEF (= 1) and DATA_PAGES_PER_BLK_DEF * PAGE_SIZE. There is no way yet to set the values via configfs. Link: https://lore.kernel.org/r/20210324195758.2021-6-bostroesser@gmail.com Signed-off-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: target: tcmu: Remove function tcmu_get_block_page()Bodo Stroesser
There is only one caller of tcmu_get_block_page left. Since it is a one-liner, we can remove the function. Link: https://lore.kernel.org/r/20210324195758.2021-5-bostroesser@gmail.com Signed-off-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: target: tcmu: Support DATA_BLOCK_SIZE = N * PAGE_SIZEBodo Stroesser
Change tcmu to support DATA_BLOCK_SIZE being a multiple of PAGE_SIZE. There are two reasons why one would like to have a bigger DATA_BLOCK_SIZE: 1) If userspace - e.g. due to data compression, encryption or deduplication - needs to have receive or transmit data in a consecutive buffer, we can define DATA_BLOCK_SIZE to the maximum size of a SCSI READ/WRITE to enforce that userspace sees just one consecutive buffer. That way we can avoid the need for doing data copy in userspace. 2) Using a bigger data block size can speed up command processing in tcmu. The number of free data blocks to look up in bitmap is reduced substantially. The lookup for data pages in radix_tree can be done more efficiently if there are multiple pages in a data block. The maximum number of IOVs to set up is lower so cmd entries in the ring become smaller. Link: https://lore.kernel.org/r/20210324195758.2021-4-bostroesser@gmail.com Signed-off-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: target: tcmu: Prepare for PAGE_SIZE != DATA_BLOCK_SIZEBodo Stroesser
Rename some variables and definitions as a first preparation for DATA_BLOCK_SIZE != PAGE_SIZE and add the new DATA_PAGES_PER_BLK definition containing the number of pages per data block. Rename tcmu_try_get_block_page() to tcmu_try_get_data_page(). Keep name tcmu_get_block_page() since it will go away in a following commit when there is only one caller left. Subsequent commits will then add full support for DATA_PAGES_PER_BLK != 1, which also means DATA_BLOCK_SIZE = DATA_PAGES_PER_BLK * PAGE_SIZE Link: https://lore.kernel.org/r/20210324195758.2021-3-bostroesser@gmail.com Signed-off-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12scsi: target: tcmu: Adjust names of variables and definitionsBodo Stroesser
Some definitions and members of struct tcmu_dev had misleading names. Examples: - ring_size was used for the size of mailbox + cmd ring + data area - CMDR_SIZE was used for size of mailbox + cmd ring I added the new definition MB_CMDR_SIZE (mailbox + command ring), changed CMDR_SIZE to hold the size of the command ring only and replaced in struct tcmu_dev the member ring_size with mmap_pages, because the member is now used in tcmu_mmap() only, where we need page count, not size. I also added the new struct tcmu_dev member 'cmdr' which is used to replace some occurences of '(void *)mb + CMDR_OFF' with 'udev->cmdr' for better readability. Link: https://lore.kernel.org/r/20210324195758.2021-2-bostroesser@gmail.com Signed-off-by: Bodo Stroesser <bostroesser@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-12Merge branch '5.12/scsi-fixes' into 5.13/scsi-stagingMartin K. Petersen
Resolve a couple of conflicts between the 5.12 fixes branch and the 5.13 staging tree (iSCSI target and UFS). Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-06scsi: libsas: Clean up whitespaceLuo Jiaxing
checkpatch reported several whitespace errors. Fix them all. Link: https://lore.kernel.org/r/1616675396-6108-3-git-send-email-luojiaxing@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: libsas: Correctly indent statements in sas_to_ata_err()Luo Jiaxing
checkpatch reported an error in sas_to_ata_err(). switch and case statements are incorrectly indented. Link: https://lore.kernel.org/r/1616675396-6108-2-git-send-email-luojiaxing@huawei.com Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: qedf: Remove unused include of linux/version.hTian Tao
Remove unnecessary include of linux/version.h. Link: https://lore.kernel.org/r/1617283618-19346-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: bfa: Remove unnecessary struct declarationsWan Jiabing
struct bfa_fcs_s is declared twice. First is declared at line 50, remove the duplicate. struct bfa_fcs_fabric_s is defined at line 175, remove unnecessary declaration. Link: https://lore.kernel.org/r/20210401063535.992487-1-wanjiabing@vivo.com Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: ufs: core: Fix out-of-bounds warnings in ufshcd_exec_raw_upiu_cmd()Gustavo A. R. Silva
Fix the following out-of-bounds warnings by enclosing some structure members into new structure objects upiu_req and upiu_rsp: include/linux/fortify-string.h:20:29: warning: '__builtin_memcpy' offset [29, 48] from the object at 'treq' is out of the bounds of referenced subobject 'req_header' with type 'struct utp_upiu_header' at offset 16 [-Warray-bounds] include/linux/fortify-string.h:20:29: warning: '__builtin_memcpy' offset [61, 80] from the object at 'treq' is out of the bounds of referenced subobject 'rsp_header' with type 'struct utp_upiu_header' at offset 48 [-Warray-bounds] arch/m68k/include/asm/string.h:72:25: warning: '__builtin_memcpy' offset [29, 48] from the object at 'treq' is out of the bounds of referenced subobject 'req_header' with type 'struct utp_upiu_header' at offset 16 [-Warray-bounds] arch/m68k/include/asm/string.h:72:25: warning: '__builtin_memcpy' offset [61, 80] from the object at 'treq' is out of the bounds of referenced subobject 'rsp_header' with type 'struct utp_upiu_header' at offset 48 [-Warray-bounds] Refactor the code by making it more structured. The problem is that the original code is trying to copy data into a bunch of struct members adjacent to each other in a single call to memcpy(). Now that a new struct _upiu_req_ enclosing all those adjacent members is introduced, memcpy() doesn't overrun the length of &treq.req_header, because the address of the new struct object _upiu_req_ is used as the destination, instead. The same problem is present when memcpy() overruns the length of the source &treq.rsp_header; in this case the address of the new struct object _upiu_rsp_ is used, instead. Also, this helps with the ongoing efforts to enable -Warray-bounds and avoid confusing the compiler. Link: https://github.com/KSPP/linux/issues/109 Link: https://lore.kernel.org/lkml/60640558.lsAxiK6otPwTo9rv%25lkp@intel.com/ Link: https://lore.kernel.org/r/20210331224338.GA347171@embeddedor Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Build-tested-by: kernel test robot <lkp@intel.com>
2021-04-05scsi: fnic: Remove unnecessary spin_lock_init() and INIT_LIST_HEAD()Yang Yingliang
The spinlock and list head of fnic_list are initialized statically. It is unnecessary to initialize them. Link: https://lore.kernel.org/r/20210330125911.1050879-1-yangyingliang@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: message: fusion: Use BUG_ON instead of if condition followed by BUGzhouchuangao
BUG_ON() uses unlikely in if() which can be optimized at compile time. Link: https://lore.kernel.org/r/1617108361-6870-1-git-send-email-zhouchuangao@vivo.com Signed-off-by: zhouchuangao <zhouchuangao@vivo.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: mpt3sas: Block PCI config access from userspace during resetSreekanth Reddy
While diag reset is in progress there is short duration where all access to controller's PCI config space from the host needs to be blocked. This is due to a hardware limitation of the IOC controllers. Block all access to controller's config space from userland applications by calling pci_cfg_access_lock() while diag reset is in progress and unlocking it again after the controller comes back to ready state. Link: https://lore.kernel.org/r/20210330105137.20728-1-sreekanth.reddy@broadcom.com Cc: stable@vger.kernel.org #v5.4.108+ Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: mpt3sas: Fix endianness for ActiveCablePowerRequirementSreekanth Reddy
Covert ActiveCablePowerRequirement's value to target CPU endian before displaying it. Link: https://lore.kernel.org/r/20210330105106.20569-1-sreekanth.reddy@broadcom.com Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05scsi: mpt3sas: Only one vSES is present even when IOC has multi vSESSreekanth Reddy
Whenever the driver is adding a vSES to virtual-phys list it is reinitializing the list head. Hence those vSES devices which were added previously are lost. Stop reinitializing the list every time a new vSES device is added. Link: https://lore.kernel.org/r/20210330105004.20413-1-sreekanth.reddy@broadcom.com Cc: stable@vger.kernel.org #v5.11.10+ Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2025-05-04 06:44:09 +0000