| Age | Commit message (Collapse) | Author |
|---|
|
This patch contains the generated header file of the following
change "drm/msm/mdp5: Get SMP client list from mdp5_cfg".
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
MDP block is actually contained inside the MDSS block. For some
chipsets, the base address of the MDP registers is different from the
current (assumed) 0x100 offset.
Like CTL and LM blocks, this changes introduce a dynamic offset
for the MDP instance, which can be found out at runtime, once the
MDSS HW version is read.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
This change contains the generated header file for the following
change "drm/msm/mdp5: Separate MDP5 domain from MDSS domain".
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Prepare for initial DSI implementation
Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
The width and height in SSPP_SRC_IMG_SIZE register should be the
size of the entire source framebuffer, not the fetch size.
Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
This change adds the registers in mdp5 ping pong blocks
and split display control registers.
Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Pingpong register base addresses are different across platforms.
This change adds this information to config table and initialize
the values for 8x74 and 8084.
Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Up until now, we assume that eDP is tight to intf_0 and HDMI to
intf_3. This information shall actually come from the mdp5_cfg
module since it can change from one chip to another.
v2: rename macro to mdp5_cfg_intf_is_virtual() [pointed by Archit]
v3: add sanity check before writing in INTF_TIMING_ENGINE_EN registers
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Some interfaces (WB, DSI Command Mode) need to be kicked off
through a START Signal. This signal needs to be sent at the right
time and requests in some cases to keep track of the pipeline
status (eg: whether pipeline registers are flushed AND output WB
buffers are ready, in case of WB interface).
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
DSI and WB interfaces need a more complex pipeline configuration
than the current mdp5_ctl_set_intf().
For example, memory output connections need to be selected for
WB. Interface mode (Video vs. Command modes) also need to be
configured for DSI.
This change takes care of configuring the whole pipeline as far
as operation mode goes. DSI and WB interfaces will be added
later.
v2: rename macro to mdp5_cfg_intf_is_virtual() [pointed by Archit]
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
[Remove temp bisectability hack -Rob]
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Prepare for pipeline operation mode configuration, in particular
for DSI and WB modes.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
[Throw in a #define temporarily to keep things bisectable -Rob]
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
MDP5 hardware has some limitation and requires to avoid flushing
registers more than once between two Vblanks.
This change removes all FLUSH operations (except for HW cursor)
beside the one coming from a CRTC's ->atomic_flush().
This avoid this type of behavior (eg: CRTC + 1 plane overlay):
[drm:mdp5_crtc_vblank_irq] vblank
[drm:mdp5_ctl_commit] flush (20048) CTL + LM0 + RGB0
[drm:mdp5_ctl_commit] flush (20040) CTL + LM0
[drm:mdp5_crtc_vblank_irq] blank
[drm:mdp5_ctl_commit] flush (20049) CTL + LM0 + RGB0 + VIG0
[drm:mdp5_crtc_vblank_irq] blank
and replaces it by:
[drm:mdp5_crtc_vblank_irq] vblank
[drm:mdp5_ctl_commit] flush (20048) CTL + LM0 + RGB0
[drm:mdp5_crtc_vblank_irq] blank
[drm:mdp5_ctl_commit] flush (20049) CTL + LM0 + RGB0 + VIG0
[drm:mdp5_crtc_vblank_irq] blank
Only *one* FLUSH is called between Vblanks interrupts.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Add support to use the VRAM carveout (if specified in dtb) for fbdev
scanout buffer. This allows drm/msm to take over a bootloader splash-
screen, and avoids corruption on screen that results if the kernel uses
memory that is still being scanned out for itself.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
We'll want to extend this a bit to handle also a reserved-memory
("stolen") region, so that drm/msm can take-over bootloader splash
screen. First split it out into it's own fxn to reduce noise in
the following patch.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
qemu and simics simulators both seem to expect that video should be disabled
before changing the video mode.
references:
http://git.qemu.org/?p=qemu.git;a=blob;f=hw/display/vga.c;h=c0f7b343bbab586c8593d29c7a765f1e6ca3662c;hb=HEAD#l727
http://wiki.osdev.org/Bochs_VBE_Extensions#Setting_display_resolution_and_bit_depth
Signed-off-by: Chris Ruffin <chris.ruffin@intel.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://anongit.freedesktop.org/drm-intel into drm-next
Final drm-misc pull for 4.0, just various things all over, including a few
more important atomic fixes. btw I didn't pick up the vmwgfx patch from
Ville's series, but one patch has one hunk touching vmwgfx and
Thomas/Jakob didn't get around to ack it. I figured it's simple enough to
be ok though.
* tag 'topic/drm-misc-2015-03-31' of git://anongit.freedesktop.org/drm-intel:
drm: line wrap DRM_IOCTL_DEF* macros
drm/atomic: Don't try to free a NULL state
drm/atomic: Clear crtcs, connectors and planes when clearing state
drm: Rewrite drm_ioctl_flags() to resemble the new drm_ioctl() code
drm: Use max() to make the ioctl alloc size code cleaner
drm: Simplify core vs. drv ioctl handling
drm: Drop ioctl->cmd_drv
drm: Fix DRM_IOCTL_DEF_DRV()
drm/atomic-helpers: Properly avoid full modeset dance
drm: atomic: Allow setting CRTC active property
drm: atomic: Expose CRTC active property
drm: crtc_helper: Update hwmode before mode_set call
drm: mode: Allow NULL modes for equality check
drm: fb_helper: Simplify exit condition
drm: mode: Fix typo in kerneldoc
drm/dp: Print the number of bytes processed for aux nacks
|
|
git://anongit.freedesktop.org/drm-intel into drm-next
This backmerges 4.0-rc6 due to the recent fixes in rc5/6
- DP link rate refactoring from Ville
- byt/bsw rps tuning from Chris
- kerneldoc for the shrinker code
- more dynamic ppgtt pte work (Michel, Ben, ...)
- vlv dpll code refactoring to prep fro bxt (Imre)
- refactoring the sprite colorkey code (Ville)
- rotated ggtt view support from Tvrtko
- roll out struct drm_atomic_state to prep for atomic update (Ander)
* tag 'drm-intel-next-2015-03-27-merge' of git://anongit.freedesktop.org/drm-intel: (473 commits)
Linux 4.0-rc6
arm64: juno: Fix misleading name of UART reference clock
drm/i915: Update DRIVER_DATE to 20150327
drm/i915: Skip allocating shadow batch for 0-length batches
drm/i915: Handle error to get connector state when staging config
drm/i915: Compare GGTT view structs instead of types
drm/i915: fix simple_return.cocci warnings
drm/i915: Add module param to test the load detect code
drm/i915: Remove usage of encoder->new_crtc from clock computations
drm/i915: Don't look at staged config crtc when changing DRRS state
drm/i915: Convert intel_pipe_will_have_type() to using atomic state
drm/i915: Pass an atomic state to modeset_global_resources() functions
drm/i915: Add dynamic page trace events
drm/i915: Finish gen6/7 dynamic page table allocation
drm/i915: Remove unnecessary gen6_ppgtt_unmap_pages
drm/i915: Fix i915_dma_map_single positive error code
drm/i915: Prevent out of range pt in gen6_for_each_pde
drm/i915: fix definition of the DRM_IOCTL_I915_GET_SPRITE_COLORKEY ioctl
drm/i915: Rip out GET_SPRITE_COLORKEY ioctl
watchdog: imgpdc: Fix default heartbeat
...
|
|
Improve the readability and keeps the lines shorter than 80 columns.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
git://github.com/bbrezillon/linux-at91 into drm-next
add PM fix.
* 'drm-atmel-hlcdc-4.1-fixes' of git://github.com/bbrezillon/linux-at91:
drm: atmel-hlcdc: use appropriate enabled flag in suspend/resume
|
|
git://people.freedesktop.org/~gabbayo/linux into drm-next
- Allow amdkfd to work with multiple kgd instances. This is in preparation for
AMD's new open source kernel graphic driver (amdgpu), and for the new
AMD APU, Carrizo.
- Convert timestamping to use 64bit time accessors
- Three other minor changes.
* tag 'drm-amdkfd-next-2015-03-25' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: Add multiple kgd support
drm/amdkfd: Convert timestamping to use 64bit time accessors
drm/amdkfd: add debug prints for process teardown
drm/amdkfd: Remove unused field from struct qcm_process_device
drm/amdkfd: rename fence_wait_timeout
|
|
Consistently with other free functions, handle the NULL case without
oopsing.
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Backmerge Linux 4.0-rc6 because conflicts are (again) getting out of
hand. To make sure we don't lose any bugfixes from the 4.0-rc5-rc6
flurry of patches we've applied them all to -next too.
Conflicts:
drivers/gpu/drm/i915/intel_display.c
Always take the version from -next, we've already handled all
conflicts with explicit cherrypicking.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
Users of the atomic state assume that if the pointer to a crtc, plane or
connector is not NULL in the respective object vector, than the state
for that object in *_states vector also won't be NULL. That assumption
was broken by drm_atomic_state_clear(), which would clear the state
pointer but leave the pointer to the object still set.
This fixes a NULL pointer dereference in i915 caused by the use of
drm_atomic_state_clear().
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"The latest and greatest fixes for ARM platform code. Worth pointing
out are:
- Lines-wise, largest is a PXA fix for dealing with interrupts on DT
that was quite broken. It's still newish code so while we could
have held this off, it seemed appropriate to include now
- Some GPIO fixes for OMAP platforms added a few lines. This was
also fixes for code recently added (this release).
- Small OMAP timer fix to behave better with partially upstreamed
platforms, which is quite welcome.
- Allwinner fixes about operating point control, reducing
overclocking in some cases for better stability.
plus a handful of other smaller fixes across the map"
* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: juno: Fix misleading name of UART reference clock
ARM: dts: sunxi: Remove overclocked/overvoltaged OPP
ARM: dts: sun4i: a10-lime: Override and remove 1008MHz OPP setting
ARM: socfpga: dts: fix spi1 interrupt
ARM: dts: Fix gpio interrupts for dm816x
ARM: dts: dra7: remove ti,hwmod property from pcie phy
ARM: OMAP: dmtimer: disable pm runtime on remove
ARM: OMAP: dmtimer: check for pm_runtime_get_sync() failure
ARM: OMAP2+: Fix socbus family info for AM33xx devices
ARM: dts: omap3: Add missing dmas for crypto
ARM: dts: rockchip: disable gmac by default in rk3288.dtsi
MAINTAINERS: add rockchip regexp to the ARM/Rockchip entry
ARM: pxa: fix pxa interrupts handling in DT
ARM: pxa: Fix typo in zeus.c
ARM: sunxi: Have ARCH_SUNXI select RESET_CONTROLLER for clock driver usage
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes
Allwinner fixes for 4.0
There's a few fixes to merge for 4.0, one to add a select in the machine
Kconfig option to fix a potential build failure, and two fixing cpufreq related
issues.
* tag 'sunxi-fixes-for-4.0' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: dts: sunxi: Remove overclocked/overvoltaged OPP
ARM: dts: sun4i: a10-lime: Override and remove 1008MHz OPP setting
ARM: sunxi: Have ARCH_SUNXI select RESET_CONTROLLER for clock driver usage
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for omaps for the -rc cycle:
- Fix a device tree based booting vs legacy booting regression for
omap3 crypto hardware by adding the missing DMA channels.
- Fix /sys/bus/soc/devices/soc0/family for am33xx devices.
- Fix two timer issues that can cause hangs if the timer related
hwmod data is missing like it often initially is for new SoCs.
- Remove pcie hwmods entry from dts as that causes runtime PM to
fail for the PHYs.
- A paper bag type dts configuration fix for dm816x GPIO
interrupts that I just noticed. This is most of the changes
diffstat wise, but as it's a basic feature for connecting
devices and things work otherwise, it should be fixed.
* tag 'fixes-v4.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Fix gpio interrupts for dm816x
ARM: dts: dra7: remove ti,hwmod property from pcie phy
ARM: OMAP: dmtimer: disable pm runtime on remove
ARM: OMAP: dmtimer: check for pm_runtime_get_sync() failure
ARM: OMAP2+: Fix socbus family info for AM33xx devices
ARM: dts: omap3: Add missing dmas for crypto
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.rocketboards.org/linux-socfpga-next into fixes
Late fix for v4.0 on the SoCFPGA platform:
- Fix interrupt number for SPI1 interface
* tag 'socfpga_fix_for_v4.0_2' of git://git.rocketboards.org/linux-socfpga-next:
ARM: socfpga: dts: fix spi1 interrupt
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
The UART reference clock speed is 7273.8 kHz, not 72738 kHz.
Dots aren't usually used in node names even though ePAPR permits
them. However, this can easily be avoided by expressing the
frequency in Hz, not kHz.
This patch changes the name to refclk7273800hz, reflecting the
actual clock speed.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
arm: pxa: fixes for v4.0-rc5
There are only 2 fixes, one for the zeus board about the regulator changes,
where a typo prevented the zeus board from having a working can regulator,
and one regression triggered by the interrupts IRQ shift of 16 affecting all
boards.
* tag 'fixes-for-v4.0-rc5' of https://github.com/rjarzmik/linux:
ARM: pxa: fix pxa interrupts handling in DT
ARM: pxa: Fix typo in zeus.c
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix x86 syscall exit code bug that resulted in spurious non-execution
of TIF-driven user-return worklets, causing big trouble for things
like KVM that rely on user notifiers for correctness of their vcpu
model, causing crashes like double faults"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm/entry: Check for syscall exit work with IRQs disabled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Two clocksource driver fixes, and an idle loop RCU warning fix"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/sun5i: Fix cpufreq interaction with sched_clock()
clocksource/drivers: Fix various !CONFIG_HAS_IOMEM build errors
timers/tick/broadcast-hrtimer: Fix suspicious RCU usage in idle loop
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"A single sched/rt corner case fix for RLIMIT_RTIME correctness"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix RLIMIT_RTTIME when PI-boosting to RT
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Ingo Molnar:
"A perf kernel side fix for a fuzzer triggered lockup"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix irq_work 'tail' recursion
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
"A module unload lockdep race fix"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep: Fix the module unload key range freeing logic
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parsic fixes from Helge Deller:
"One patch from Mikulas fixes a bug on parisc by artifically
incrementing the counter in pmd_free when the kernel tries to free
the preallocated pmd.
Other than that we now prevent that syscalls gets added without
incrementing __NR_Linux_syscalls and fix the initial pmd setup code
if a default page size greater than 4k has been selected"
* 'parisc-4.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix pmd code to depend on PT_NLEVELS value, not on CONFIG_64BIT
parisc: mm: don't count preallocated pmds
parisc: Add compile-time check when adding new syscalls
|
|
Pull kvm ppc bugfixes from Marcelo Tosatti.
* git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: PPC: Book3S HV: Fix instruction emulation
KVM: PPC: Book3S HV: Endian fix for accessing VPA yield count
KVM: PPC: Book3S HV: Fix spinlock/mutex ordering issue in kvmppc_set_lpcr()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
"We found some issues with signal handling taking down the system. I
know its late, but these are important and all marked for stable.
ARC signal handling related fixes uncovered during recent testing of
NPTL tools"
* tag 'arc-4.0-fixes-part-2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: signal handling robustify
ARC: SA_SIGINFO ucontext regs off-by-one
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull selinux bugfix from James Morris.
Fix broken return value.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
selinux: fix sel_write_enforce broken return value
|
|
Pull watchdog fixes from Wim Van Sebroeck:
- mtk_wdt: signedness bug in mtk_wdt_start()
- imgpdc: Fix NULL pointer dereference during probe and fix the default
heartbeat
* git://www.linux-watchdog.org/linux-watchdog:
watchdog: imgpdc: Fix default heartbeat
watchdog: imgpdc: Fix probe NULL pointer dereference
watchdog: mtk_wdt: signedness bug in mtk_wdt_start()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Three trivial oneliner fixes for HD-audio.
Two are device-specific quirks while one is a generic fix for recent
Realtek codecs"
* tag 'sound-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Add one more node in the EAPD supporting candidate list
ALSA: hda_intel: apply the Seperate stream_tag for Sunrise Point
ALSA: hda - Add dock support for Thinkpad T450s (17aa:5036)
|
|
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Use the same logic when checking for valid ioctl range in
drm_ioctl_flags() that is used in drm_ioctl() to avoid
confusion.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Use max() to make the code to determine the allocation size for
the ioctl data easier to read.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Now that cmd_drv is gone the handling for core and driver ioctls is
mostly identical, so eliminate the duplication. Also take the
opportunity to simplify the range checks to be less cluttered.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
ioctl->cmd_drv is pointless and we can just as well stick the full ioctl
definition into ioctl->cmd.
Cc: Jakob Bornecrantz <jakob@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Currently DRM_IOCTL_DEF_DRV does '[DRM_IOCTL_NR(DRM_##ioctl)]' which
doesn't make much sense since DRM_##ioctl is already a the raw ioctl
number. So change it to 'DRM_IOCTL_NR(DRM_IOCTL_##ioctl) - DRM_COMMAND_BASE'
which means the DRM_IOCTL_NR() now makes sense, and also this also means
if there's a mistake in the DRM_IOCTL_##ioctl macros we might get a
warning about it (eg. we would have gotten a sparse warning about the
i915 colorkey get/set ioctl being defined to be the same thing).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Since
commit 17cabf571e50677d980e9ab2a43c5f11213003ae
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Wed Jan 14 11:20:57 2015 +0000
drm/i915: Trim the command parser allocations
we may then try to allocate a zero-sized object and attempt to extract
its pages. Understandably this fails.
Testcase: igt/gem_exec_nop #ivb,byt,hsw
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The return value of one of the calls to drm_atomic_get_connector_state()
in intel_modeset_stage_output_state() wasn't checked for errors.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
