| Age | Commit message (Collapse) | Author |
|---|
|
Refactor btf_get_prog_ctx_type() a bit to allow reuse of
bpf_ctx_convert_map logic in more than one places. Simplify interface by
returning btf_type instead of btf_member (field reference in BTF).
To do the above we need to touch and start untangling
btf_translate_to_vmlinux() implementation. We do the bare minimum to
not regress anything for btf_translate_to_vmlinux(), but its
implementation is very questionable for what it claims to be doing.
Mapping kfunc argument types to kernel corresponding types conceptually
is quite different from recognizing program context types. Fixing this
is out of scope for this change though.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240118033143.3384355-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add feature detector of kernel-side arg:ctx (__arg_ctx) tag support. If
this is detected, libbpf will avoid doing any __arg_ctx-related BTF
rewriting and checks in favor of letting kernel handle this completely.
test_global_funcs/ctx_arg_rewrite subtest is adjusted to do the same
feature detection (albeit in much simpler, though round-about and
inefficient, way), and skip the tests. This is done to still be able to
execute this test on older kernels (like in libbpf CI).
Note, BPF token series ([0]) does a major refactor and code moving of
libbpf-internal feature detection "framework", so to avoid unnecessary
conflicts we keep newly added feature detection stand-alone with ad-hoc
result caching. Once things settle, there will be a small follow up to
re-integrate everything back and move code into its final place in
newly-added (by BPF token series) features.c file.
[0] https://patchwork.kernel.org/project/netdevbpf/list/?series=814209&state=*
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240118033143.3384355-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a test case for PTR_TO_FLOW_KEYS alu. Testing if alu with variable
offset on flow_keys is rejected. For the fixed offset success case, we
already have C code coverage to verify (e.g. via bpf_flow.c).
Signed-off-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240115082028.9992-2-sunhao.th@gmail.com
|
|
For PTR_TO_FLOW_KEYS, check_flow_keys_access() only uses fixed off
for validation. However, variable offset ptr alu is not prohibited
for this ptr kind. So the variable offset is not checked.
The following prog is accepted:
func#0 @0
0: R1=ctx() R10=fp0
0: (bf) r6 = r1 ; R1=ctx() R6_w=ctx()
1: (79) r7 = *(u64 *)(r6 +144) ; R6_w=ctx() R7_w=flow_keys()
2: (b7) r8 = 1024 ; R8_w=1024
3: (37) r8 /= 1 ; R8_w=scalar()
4: (57) r8 &= 1024 ; R8_w=scalar(smin=smin32=0,
smax=umax=smax32=umax32=1024,var_off=(0x0; 0x400))
5: (0f) r7 += r8
mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r8 stack= before 4: (57) r8 &= 1024
mark_precise: frame0: regs=r8 stack= before 3: (37) r8 /= 1
mark_precise: frame0: regs=r8 stack= before 2: (b7) r8 = 1024
6: R7_w=flow_keys(smin=smin32=0,smax=umax=smax32=umax32=1024,var_off
=(0x0; 0x400)) R8_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=1024,
var_off=(0x0; 0x400))
6: (79) r0 = *(u64 *)(r7 +0) ; R0_w=scalar()
7: (95) exit
This prog loads flow_keys to r7, and adds the variable offset r8
to r7, and finally causes out-of-bounds access:
BUG: unable to handle page fault for address: ffffc90014c80038
[...]
Call Trace:
<TASK>
bpf_dispatcher_nop_func include/linux/bpf.h:1231 [inline]
__bpf_prog_run include/linux/filter.h:651 [inline]
bpf_prog_run include/linux/filter.h:658 [inline]
bpf_prog_run_pin_on_cpu include/linux/filter.h:675 [inline]
bpf_flow_dissect+0x15f/0x350 net/core/flow_dissector.c:991
bpf_prog_test_run_flow_dissector+0x39d/0x620 net/bpf/test_run.c:1359
bpf_prog_test_run kernel/bpf/syscall.c:4107 [inline]
__sys_bpf+0xf8f/0x4560 kernel/bpf/syscall.c:5475
__do_sys_bpf kernel/bpf/syscall.c:5561 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5559 [inline]
__x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:5559
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Fix this by rejecting ptr alu with variable offset on flow_keys.
Applying the patch rejects the program with "R7 pointer arithmetic
on flow_keys prohibited".
Fixes: d58e468b1112 ("flow_dissector: implements flow dissector BPF hook")
Signed-off-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240115082028.9992-1-sunhao.th@gmail.com
|
|
Martin KaFai Lau says:
====================
bpf: Fix backward progress bug in bpf_iter_udp
From: Martin KaFai Lau <martin.lau@kernel.org>
This patch set fixes an issue in bpf_iter_udp that makes backward
progress and prevents the user space process from finishing. There is
a test at the end to reproduce the bug.
Please see individual patches for details.
v3:
- Fixed the iter_fd check and local_port check in the
patch 3 selftest. (Yonghong)
- Moved jhash2 to test_jhash.h in the patch 3. (Yonghong)
- Added explanation in the bucket selection in the patch 3. (Yonghong)
v2:
- Added patch 1 to fix another bug that goes back to
the previous bucket
- Simplify the fix in patch 2 to always reset iter->offset to 0
- Add a test case to close all udp_sk in a bucket while
in the middle of the iteration.
====================
Link: https://lore.kernel.org/r/20240112190530.3751661-1-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The patch adds a test to exercise the bpf_iter_udp batching
logic. It specifically tests the case that there are multiple
so_reuseport udp_sk in a bucket of the udp_table.
The test creates two sets of so_reuseport sockets and
each set on a different port. Meaning there will be
two buckets in the udp_table.
The test does the following:
1. read() 3 out of 4 sockets in the first bucket.
2. close() all sockets in the first bucket. This
will ensure the current bucket's offset in
the kernel does not affect the read() of the
following bucket.
3. read() all 4 sockets in the second bucket.
The test also reads one udp_sk at a time from
the bpf_iter_udp prog. The true case in
"do_test(..., bool onebyone)". This is the buggy case
that the previous patch fixed.
It also tests the "false" case in "do_test(..., bool onebyone)",
meaning the userspace reads the whole bucket. There is
no bug in this case but adding this test also while
at it.
Considering the way to have multiple tcp_sk in the same
bucket is similar (by using so_reuseport),
this patch also tests the bpf_iter_tcp even though the
bpf_iter_tcp batching logic works correctly.
Both IP v4 and v6 are exercising the same bpf_iter batching
code path, so only v6 is tested.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240112190530.3751661-4-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
There is a bug in the bpf_iter_udp_batch() function that stops
the userspace from making forward progress.
The case that triggers the bug is the userspace passed in
a very small read buffer. When the bpf prog does bpf_seq_printf,
the userspace read buffer is not enough to capture the whole bucket.
When the read buffer is not large enough, the kernel will remember
the offset of the bucket in iter->offset such that the next userspace
read() can continue from where it left off.
The kernel will skip the number (== "iter->offset") of sockets in
the next read(). However, the code directly decrements the
"--iter->offset". This is incorrect because the next read() may
not consume the whole bucket either and then the next-next read()
will start from offset 0. The net effect is the userspace will
keep reading from the beginning of a bucket and the process will
never finish. "iter->offset" must always go forward until the
whole bucket is consumed.
This patch fixes it by using a local variable "resume_offset"
and "resume_bucket". "iter->offset" is always reset to 0 before
it may be used. "iter->offset" will be advanced to the
"resume_offset" when it continues from the "resume_bucket" (i.e.
"state->bucket == resume_bucket"). This brings it closer to
the bpf_iter_tcp's offset handling which does not suffer
the same bug.
Cc: Aditi Ghag <aditi.ghag@isovalent.com>
Fixes: c96dac8d369f ("bpf: udp: Implement batching for sockets iterator")
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Aditi Ghag <aditi.ghag@isovalent.com>
Link: https://lore.kernel.org/r/20240112190530.3751661-3-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
previous bucket
The current logic is to use a default size 16 to batch the whole bucket.
If it is too small, it will retry with a larger batch size.
The current code accidentally does a state->bucket-- before retrying.
This goes back to retry with the previous bucket which has already
been done. This patch fixed it.
It is hard to create a selftest. I added a WARN_ON(state->bucket < 0),
forced a particular port to be hashed to the first bucket,
created >16 sockets, and observed the for-loop went back
to the "-1" bucket.
Cc: Aditi Ghag <aditi.ghag@isovalent.com>
Fixes: c96dac8d369f ("bpf: udp: Implement batching for sockets iterator")
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Aditi Ghag <aditi.ghag@isovalent.com>
Link: https://lore.kernel.org/r/20240112190530.3751661-2-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
netif_txq_try_stop() uses "get_desc >= start_thrs" as the check for
the call to netif_tx_start_queue().
Use ">=" i netdev_txq_completed_mb(), too.
Fixes: c91c46de6bbc ("net: provide macros for commonly copied lockless queue stop/wake code")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot/KMSAN reports access to uninitialized data from gso_features_check() [1]
The repro use af_packet, injecting a gso packet and hdrlen == 0.
We could fix the issue making gso_features_check() more careful
while dealing with NETIF_F_TSO_MANGLEID in fast path.
Or we can make sure virtio_net_hdr_to_skb() pulls minimal network and
transport headers as intended.
Note that for GSO packets coming from untrusted sources, SKB_GSO_DODGY
bit forces a proper header validation (and pull) before the packet can
hit any device ndo_start_xmit(), thus we do not need a precise disection
at virtio_net_hdr_to_skb() stage.
[1]
BUG: KMSAN: uninit-value in skb_gso_segment include/net/gso.h:83 [inline]
BUG: KMSAN: uninit-value in validate_xmit_skb+0x10f2/0x1930 net/core/dev.c:3629
skb_gso_segment include/net/gso.h:83 [inline]
validate_xmit_skb+0x10f2/0x1930 net/core/dev.c:3629
__dev_queue_xmit+0x1eac/0x5130 net/core/dev.c:4341
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3087 [inline]
packet_sendmsg+0x8b1d/0x9f30 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
__sys_sendmsg net/socket.c:2667 [inline]
__do_sys_sendmsg net/socket.c:2676 [inline]
__se_sys_sendmsg net/socket.c:2674 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2674
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Uninit was created at:
slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560
__alloc_skb+0x318/0x740 net/core/skbuff.c:651
alloc_skb include/linux/skbuff.h:1286 [inline]
alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334
sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2780
packet_alloc_skb net/packet/af_packet.c:2936 [inline]
packet_snd net/packet/af_packet.c:3030 [inline]
packet_sendmsg+0x70e8/0x9f30 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
__sys_sendmsg net/socket.c:2667 [inline]
__do_sys_sendmsg net/socket.c:2676 [inline]
__se_sys_sendmsg net/socket.c:2674 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2674
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
CPU: 0 PID: 5025 Comm: syz-executor279 Not tainted 6.7.0-rc7-syzkaller-00003-gfbafc3e621c3 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
Reported-by: syzbot+7f4d0ea3df4d4fa9a65f@syzkaller.appspotmail.com
Link: https://lore.kernel.org/netdev/0000000000005abd7b060eb160cd@google.com/
Fixes: 9274124f023b ("net: stricter validation of untrusted gso packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Clsact/ingress qdisc is not the only one using shared block,
red is also using it. The device tracking was originally introduced
by commit 913b47d3424e ("net/sched: Introduce tc block netdev
tracking infra") for clsact/ingress only. Commit 94e2557d086a ("net:
sched: move block device tracking into tcf_block_get/put_ext()")
mistakenly enabled that for red as well.
Fix that by adding a check for the binder type being clsact when adding
device to the block->ports xarray.
Reported-by: Ido Schimmel <idosch@idosch.org>
Closes: https://lore.kernel.org/all/ZZ6JE0odnu1lLPtu@shredder/
Fixes: 94e2557d086a ("net: sched: move block device tracking into tcf_block_get/put_ext()")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
up->pending can be read without holding the socket lock,
as pointed out by syzbot [1]
Add READ_ONCE() in lockless contexts, and WRITE_ONCE()
on write side.
[1]
BUG: KCSAN: data-race in udpv6_sendmsg / udpv6_sendmsg
write to 0xffff88814e5eadf0 of 4 bytes by task 15547 on cpu 1:
udpv6_sendmsg+0x1405/0x1530 net/ipv6/udp.c:1596
inet6_sendmsg+0x63/0x80 net/ipv6/af_inet6.c:657
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
__sys_sendto+0x257/0x310 net/socket.c:2192
__do_sys_sendto net/socket.c:2204 [inline]
__se_sys_sendto net/socket.c:2200 [inline]
__x64_sys_sendto+0x78/0x90 net/socket.c:2200
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
read to 0xffff88814e5eadf0 of 4 bytes by task 15551 on cpu 0:
udpv6_sendmsg+0x22c/0x1530 net/ipv6/udp.c:1373
inet6_sendmsg+0x63/0x80 net/ipv6/af_inet6.c:657
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x37c/0x4d0 net/socket.c:2586
___sys_sendmsg net/socket.c:2640 [inline]
__sys_sendmmsg+0x269/0x500 net/socket.c:2726
__do_sys_sendmmsg net/socket.c:2755 [inline]
__se_sys_sendmmsg net/socket.c:2752 [inline]
__x64_sys_sendmmsg+0x57/0x60 net/socket.c:2752
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
value changed: 0x00000000 -> 0x0000000a
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 15551 Comm: syz-executor.1 Tainted: G W 6.7.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+8d482d0e407f665d9d10@syzkaller.appspotmail.com
Link: https://lore.kernel.org/netdev/0000000000009e46c3060ebcdffd@google.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently get/set_link_ksettings ethtool ops are dependent on PCS.
When PCS is integrated, it will not have separate link config.
Bypass configuring and checking PCS for integrated PCS.
Fixes: aa571b6275fb ("net: stmmac: add new switch to struct plat_stmmacenet_data")
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8775p-ride
Signed-off-by: Sneh Shah <quic_snehshah@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Eric Dumazet says:
====================
mptcp: better validation of MPTCPOPT_MP_JOIN option
Based on a syzbot report (see 4th patch in the series).
We need to be more explicit about which one of the
following flag is set by mptcp_parse_option():
- OPTION_MPTCP_MPJ_SYN
- OPTION_MPTCP_MPJ_SYNACK
- OPTION_MPTCP_MPJ_ACK
Then select the appropriate values instead of OPTIONS_MPTCP_MPJ
Paolo suggested to do the same for OPTIONS_MPTCP_MPC (5th patch)
====================
Link: https://lore.kernel.org/r/20240111194917.4044654-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
OPTIONS_MPTCP_MPC is a combination of three flags.
It would be better to be strict about testing what
flag is expected, at least for code readability.
mptcp_parse_option() already makes the distinction.
- subflow_check_req() should use OPTION_MPTCP_MPC_SYN.
- mptcp_subflow_init_cookie_req() should use OPTION_MPTCP_MPC_ACK.
- subflow_finish_connect() should use OPTION_MPTCP_MPC_SYNACK
- subflow_syn_recv_sock should use OPTION_MPTCP_MPC_ACK
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Fixes: 74c7dfbee3e1 ("mptcp: consolidate in_opt sub-options fields in a bitmask")
Link: https://lore.kernel.org/r/20240111194917.4044654-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot reported that subflow_check_req() was using uninitialized data in
subflow_check_req() [1]
This is because mp_opt.token is only set when OPTION_MPTCP_MPJ_SYN is also set.
While we are are it, fix mptcp_subflow_init_cookie_req()
to test for OPTION_MPTCP_MPJ_ACK.
[1]
BUG: KMSAN: uninit-value in subflow_token_join_request net/mptcp/subflow.c:91 [inline]
BUG: KMSAN: uninit-value in subflow_check_req+0x1028/0x15d0 net/mptcp/subflow.c:209
subflow_token_join_request net/mptcp/subflow.c:91 [inline]
subflow_check_req+0x1028/0x15d0 net/mptcp/subflow.c:209
subflow_v6_route_req+0x269/0x410 net/mptcp/subflow.c:367
tcp_conn_request+0x153a/0x4240 net/ipv4/tcp_input.c:7164
subflow_v6_conn_request+0x3ee/0x510
tcp_rcv_state_process+0x2e1/0x4ac0 net/ipv4/tcp_input.c:6659
tcp_v6_do_rcv+0x11bf/0x1fe0 net/ipv6/tcp_ipv6.c:1669
tcp_v6_rcv+0x480b/0x4fb0 net/ipv6/tcp_ipv6.c:1900
ip6_protocol_deliver_rcu+0xda6/0x2a60 net/ipv6/ip6_input.c:438
ip6_input_finish net/ipv6/ip6_input.c:483 [inline]
NF_HOOK include/linux/netfilter.h:314 [inline]
ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492
dst_input include/net/dst.h:461 [inline]
ip6_rcv_finish+0x5db/0x870 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:314 [inline]
ipv6_rcv+0xda/0x390 net/ipv6/ip6_input.c:310
__netif_receive_skb_one_core net/core/dev.c:5532 [inline]
__netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5646
netif_receive_skb_internal net/core/dev.c:5732 [inline]
netif_receive_skb+0x58/0x660 net/core/dev.c:5791
tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555
tun_get_user+0x53af/0x66d0 drivers/net/tun.c:2002
tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048
call_write_iter include/linux/fs.h:2020 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x8ef/0x1490 fs/read_write.c:584
ksys_write+0x20f/0x4c0 fs/read_write.c:637
__do_sys_write fs/read_write.c:649 [inline]
__se_sys_write fs/read_write.c:646 [inline]
__x64_sys_write+0x93/0xd0 fs/read_write.c:646
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Local variable mp_opt created at:
subflow_check_req+0x6d/0x15d0 net/mptcp/subflow.c:145
subflow_v6_route_req+0x269/0x410 net/mptcp/subflow.c:367
CPU: 1 PID: 5924 Comm: syz-executor.3 Not tainted 6.7.0-rc8-syzkaller-00055-g5eff55d725a4 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Peter Krystad <peter.krystad@linux.intel.com>
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Mat Martineau <martineau@kernel.org>
Cc: Geliang Tang <geliang.tang@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20240111194917.4044654-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
subflow_finish_connect() uses four fields (backup, join_id, thmac, none)
that may contain garbage unless OPTION_MPTCP_MPJ_SYNACK has been set
in mptcp_parse_option()
Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Peter Krystad <peter.krystad@linux.intel.com>
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Mat Martineau <martineau@kernel.org>
Cc: Geliang Tang <geliang.tang@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20240111194917.4044654-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mp_opt->hmac contains uninitialized data unless OPTION_MPTCP_MPJ_ACK
was set in mptcp_parse_option().
We must refine the condition before we call subflow_hmac_valid().
Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Peter Krystad <peter.krystad@linux.intel.com>
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Mat Martineau <martineau@kernel.org>
Cc: Geliang Tang <geliang.tang@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20240111194917.4044654-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mptcp_parse_option() currently sets OPTIONS_MPTCP_MPJ, for the three
possible cases handled for MPTCPOPT_MP_JOIN option.
OPTIONS_MPTCP_MPJ is the combination of three flags:
- OPTION_MPTCP_MPJ_SYN
- OPTION_MPTCP_MPJ_SYNACK
- OPTION_MPTCP_MPJ_ACK
This is a problem, because backup, join_id, token, nonce and/or hmac fields
could be left uninitialized in some cases.
Distinguish the three cases, as following patches will need this step.
Fixes: f296234c98a8 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Peter Krystad <peter.krystad@linux.intel.com>
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Mat Martineau <martineau@kernel.org>
Cc: Geliang Tang <geliang.tang@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20240111194917.4044654-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When compiling with clang-18 and W=1, I've noticed the following
warnings:
drivers/net/ethernet/cavium/liquidio/cn23xx_pf_device.c:1493:16: warning: cast
from 'void (*)(struct octeon_device *, struct octeon_mbox_cmd *, void *)' to
'octeon_mbox_callback_t' (aka 'void (*)(void *, void *, void *)') converts to
incompatible function type [-Wcast-function-type-strict]
1493 | mbox_cmd.fn = (octeon_mbox_callback_t)cn23xx_get_vf_stats_callback;
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
and:
drivers/net/ethernet/cavium/liquidio/cn23xx_vf_device.c:432:16: warning: cast
from 'void (*)(struct octeon_device *, struct octeon_mbox_cmd *, void *)' to
'octeon_mbox_callback_t' (aka 'void (*)(void *, void *, void *)') converts to
incompatible function type [-Wcast-function-type-strict]
432 | mbox_cmd.fn = (octeon_mbox_callback_t)octeon_pfvf_hs_callback;
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix both of the above by adjusting 'octeon_mbox_callback_t' to match actual
callback definitions (at the cost of adding an extra forward declaration).
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240111162432.124014-1-dmantipov@yandex.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add a description to Wangxun's common code lib.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The RZ/G3S SMARC Module has 2 KSZ9131 PHYs. In this setup, the KSZ9131 PHY
is used with the ravb Ethernet driver. It has been discovered that when
bringing the Ethernet interface down/up continuously, e.g., with the
following sh script:
$ while :; do ifconfig eth0 down; ifconfig eth0 up; done
the link speed and duplex are wrong after interrupting the bring down/up
operation even though the Ethernet interface is up. To recover from this
state the following configuration sequence is necessary (executed
manually):
$ ifconfig eth0 down
$ ifconfig eth0 up
The behavior has been identified also on the Microchip SAMA7G5-EK board
which runs the macb driver and uses the same PHY.
The order of PHY-related operations in ravb_open() is as follows:
ravb_open() ->
ravb_phy_start() ->
ravb_phy_init() ->
of_phy_connect() ->
phy_connect_direct() ->
phy_attach_direct() ->
phy_init_hw() ->
phydev->drv->soft_reset()
phydev->drv->config_init()
phydev->drv->config_intr()
phy_resume()
kszphy_resume()
The order of PHY-related operations in ravb_close is as follows:
ravb_close() ->
phy_stop() ->
phy_suspend() ->
kszphy_suspend() ->
genphy_suspend()
// set BMCR_PDOWN bit in MII_BMCR
In genphy_suspend() setting the BMCR_PDWN bit in MII_BMCR switches the PHY
to Software Power-Down (SPD) mode (according to the KSZ9131 datasheet).
Thus, when opening the interface after it has been previously closed (via
ravb_close()), the phydev->drv->config_init() and
phydev->drv->config_intr() reach the KSZ9131 PHY driver via the
ksz9131_config_init() and kszphy_config_intr() functions.
KSZ9131 specifies that the MII management interface remains operational
during SPD (Software Power-Down), but (according to manual):
- Only access to the standard registers (0 through 31) is supported.
- Access to MMD address spaces other than MMD address space 1 is possible
if the spd_clock_gate_override bit is set.
- Access to MMD address space 1 is not possible.
The spd_clock_gate_override bit is not used in the KSZ9131 driver.
ksz9131_config_init() configures RGMII delay, pad skews and LEDs by
accessesing MMD registers other than those in address space 1.
The datasheet for the KSZ9131 does not specify what happens if registers
from an unsupported address space are accessed while the PHY is in SPD.
To fix the issue the .soft_reset method has been instantiated for KSZ9131,
too. This resets the PHY to the default state before doing any
configurations to it, thus switching it out of SPD.
Fixes: bff5b4b37372 ("net: phy: micrel: add Microchip KSZ9131 initial driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The HW has the capability to check each frame if it is a PTP frame,
which domain it is, which ptp frame type it is, different ip address in
the frame. And if one of these checks fail then the frame is not
timestamp. Most of these checks were disabled except checking the field
minorVersionPTP inside the PTP header. Meaning that once a partner sends
a frame compliant to 8021AS which has minorVersionPTP set to 1, then the
frame was not timestamp because the HW expected by default a value of 0
in minorVersionPTP.
Fix this issue by removing this check so the userspace can decide on this.
Fixes: cafc3662ee3f ("net: micrel: Add PHC support for lan8841")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Divya Koppera <divya.koppera@microchip.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
amt driver uses skb->cb for storing tunnel information.
This job is worked before TC layer and then amt driver load tunnel info
from skb->cb after TC layer.
So, its cb area should not be overwrapped with CB area used by TC.
In order to not use cb area used by TC, it skips the biggest cb
structure used by TC, which was qdisc_skb_cb.
But it's not anymore.
Currently, biggest structure of TC's CB is tc_skb_cb.
So, it should skip size of tc_skb_cb instead of qdisc_skb_cb.
Fixes: ec624fe740b4 ("net/sched: Extend qdisc control block with tc control block")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240107144241.4169520-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sanjuán García, Jorge says:
====================
net: ethernet: ti: am65-cpsw: Allow for MTU values
The am65-cpsw-nuss driver has a fixed definition for the maximum ethernet
frame length of 1522 bytes (AM65_CPSW_MAX_PACKET_SIZE). This limits the switch
ports to only operate at a maximum MTU of 1500 bytes. When combining this CPSW
switch with a DSA switch connected to one of its ports this limitation shows up.
The extra 8 bytes the DSA subsystem adds internally to the ethernet frame
create resulting frames bigger than 1522 bytes (1518 for non VLAN + 8 for DSA
stuff) so they get dropped by the switch.
One of the issues with the the am65-cpsw-nuss driver is that the network device
max_mtu was being set to the same fixed value defined for the max total frame
length (1522 bytes). This makes the DSA subsystem believe that the MTU of the
interface can be set to 1508 bytes to make room for the extra 8 bytes of the DSA
headers. However, all packages created assuming the 1500 bytes payload get
dropped by the switch as oversized.
This series offers a solution to this problem. The max_mtu advertised on the
network device and the actual max frame size configured on the switch registers
are made consistent by letting the extra room needed for the ethernet headers
and the frame checksum (22 bytes including VLAN).
====================
Link: https://lore.kernel.org/r/20240105085530.14070-1-jorge.sanjuangarcia@duagon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The value of AM65_CPSW_MAX_PACKET_SIZE represents the maximum length
of a received frame. This value is written to the register
AM65_CPSW_PORT_REG_RX_MAXLEN.
The maximum MTU configured on the network device should then leave
some room for the ethernet headers and frame check. Otherwise, if
the network interface is configured to its maximum mtu possible,
the frames will be larger than AM65_CPSW_MAX_PACKET_SIZE and will
get dropped as oversized.
The switch supports ethernet frame sizes between 64 and 2024 bytes
(including VLAN) as stated in the technical reference manual, so
define AM65_CPSW_MAX_PACKET_SIZE with that maximum size.
Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20240105085530.14070-2-jorge.sanjuangarcia@duagon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
region of size 10" warnings
Fix the warnings when building virtio_net driver.
"
drivers/net/virtio_net.c: In function ‘init_vqs’:
drivers/net/virtio_net.c:4551:48: warning: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Wformat-overflow=]
4551 | sprintf(vi->rq[i].name, "input.%d", i);
| ^~
In function ‘virtnet_find_vqs’,
inlined from ‘init_vqs’ at drivers/net/virtio_net.c:4645:8:
drivers/net/virtio_net.c:4551:41: note: directive argument in the range [-2147483643, 65534]
4551 | sprintf(vi->rq[i].name, "input.%d", i);
| ^~~~~~~~~~
drivers/net/virtio_net.c:4551:17: note: ‘sprintf’ output between 8 and 18 bytes into a destination of size 16
4551 | sprintf(vi->rq[i].name, "input.%d", i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/virtio_net.c: In function ‘init_vqs’:
drivers/net/virtio_net.c:4552:49: warning: ‘%d’ directive writing between 1 and 11 bytes into a region of size 9 [-Wformat-overflow=]
4552 | sprintf(vi->sq[i].name, "output.%d", i);
| ^~
In function ‘virtnet_find_vqs’,
inlined from ‘init_vqs’ at drivers/net/virtio_net.c:4645:8:
drivers/net/virtio_net.c:4552:41: note: directive argument in the range [-2147483643, 65534]
4552 | sprintf(vi->sq[i].name, "output.%d", i);
| ^~~~~~~~~~~
drivers/net/virtio_net.c:4552:17: note: ‘sprintf’ output between 9 and 19 bytes into a destination of size 16
4552 | sprintf(vi->sq[i].name, "output.%d", i);
"
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://lore.kernel.org/r/20240104020902.2753599-1-yanjun.zhu@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RPM0 and RPM1 on the CN10KB SoC have 8 LMACs each, whereas RPM2
has only 4 LMACs. Similarly, the RPM0 and RPM1 have 256KB FIFO,
whereas RPM2 has 128KB FIFO. This patch fixes an issue with
improper TX credit programming for the RPM2 link.
Fixes: b9d0fedc6234 ("octeontx2-af: cn10kb: Add RPM_USX MAC support")
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240108073036.8766-1-naveenm@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Nicolas Dichtel says:
====================
rtnetlink: allow to enslave with one msg an up interface
The first patch fixes a regression, introduced in linux v6.1, by reverting
a patch. The second patch adds a test to verify this API.
====================
Link: https://lore.kernel.org/r/20240108094103.2001224-1-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The goal is to check the following two sequences:
> ip link set dummy0 up
> ip link set dummy0 master bond0 down
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240108094103.2001224-3-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit a4abfa627c3865c37e036bccb681619a50d3d93c.
The patch broke:
> ip link set dummy0 up
> ip link set dummy0 master bond0 down
This last command is useful to be able to enslave an interface with only
one netlink message.
After discussion, there is no good reason to support:
> ip link set dummy0 down
> ip link set dummy0 master bond0 up
because the bond interface already set the slave up when it is up.
Cc: stable@vger.kernel.org
Fixes: a4abfa627c38 ("net: rtnetlink: Enslave device before bringing it up")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240108094103.2001224-2-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rxrpc normally has the Don't Fragment flag set on the UDP packets it
transmits, except when it has decided that DATA packets aren't getting
through - in which case it turns it off just for the DATA transmissions.
This can be a problem, however, for RESPONSE packets that convey
authentication and crypto data from the client to the server as ticket may
be larger than can fit in the MTU.
In such a case, rxrpc gets itself into an infinite loop as the sendmsg
returns an error (EMSGSIZE), which causes rxkad_send_response() to return
-EAGAIN - and the CHALLENGE packet is put back on the Rx queue to retry,
leading to the I/O thread endlessly attempting to perform the transmission.
Fix this by disabling DF on RESPONSE packets for now. The use of DF and
best data MTU determination needs reconsidering at some point in the
future.
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/1581852.1704813048@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After the blamed commit, we started doing this dereference for every
NETDEV_CHANGEUPPER and NETDEV_PRECHANGEUPPER event in the system.
static inline struct dsa_port *dsa_user_to_port(const struct net_device *dev)
{
struct dsa_user_priv *p = netdev_priv(dev);
return p->dp;
}
Which is obviously bogus, because not all net_devices have a netdev_priv()
of type struct dsa_user_priv. But struct dsa_user_priv is fairly small,
and p->dp means dereferencing 8 bytes starting with offset 16. Most
drivers allocate that much private memory anyway, making our access not
fault, and we discard the bogus data quickly afterwards, so this wasn't
caught.
But the dummy interface is somewhat special in that it calls
alloc_netdev() with a priv size of 0. So every netdev_priv() dereference
is invalid, and we get this when we emit a NETDEV_PRECHANGEUPPER event
with a VLAN as its new upper:
$ ip link add dummy1 type dummy
$ ip link add link dummy1 name dummy1.100 type vlan id 100
[ 43.309174] ==================================================================
[ 43.316456] BUG: KASAN: slab-out-of-bounds in dsa_user_prechangeupper+0x30/0xe8
[ 43.323835] Read of size 8 at addr ffff3f86481d2990 by task ip/374
[ 43.330058]
[ 43.342436] Call trace:
[ 43.366542] dsa_user_prechangeupper+0x30/0xe8
[ 43.371024] dsa_user_netdevice_event+0xb38/0xee8
[ 43.375768] notifier_call_chain+0xa4/0x210
[ 43.379985] raw_notifier_call_chain+0x24/0x38
[ 43.384464] __netdev_upper_dev_link+0x3ec/0x5d8
[ 43.389120] netdev_upper_dev_link+0x70/0xa8
[ 43.393424] register_vlan_dev+0x1bc/0x310
[ 43.397554] vlan_newlink+0x210/0x248
[ 43.401247] rtnl_newlink+0x9fc/0xe30
[ 43.404942] rtnetlink_rcv_msg+0x378/0x580
Avoid the kernel oops by dereferencing after the type check, as customary.
Fixes: 4c3f80d22b2e ("net: dsa: walk through all changeupper notifier functions")
Reported-and-tested-by: syzbot+d81bcd883824180500c8@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/0000000000001d4255060e87545c@google.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240110003354.2796778-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The variable rmnet_link_ops assign a *bigger* maxtype which leads to a
global out-of-bounds read when parsing the netlink attributes. See bug
trace below:
==================================================================
BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:386 [inline]
BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600
Read of size 1 at addr ffffffff92c438d0 by task syz-executor.6/84207
CPU: 0 PID: 84207 Comm: syz-executor.6 Tainted: G N 6.1.0 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x8b/0xb3 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:284 [inline]
print_report+0x172/0x475 mm/kasan/report.c:395
kasan_report+0xbb/0x1c0 mm/kasan/report.c:495
validate_nla lib/nlattr.c:386 [inline]
__nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600
__nla_parse+0x3e/0x50 lib/nlattr.c:697
nla_parse_nested_deprecated include/net/netlink.h:1248 [inline]
__rtnl_newlink+0x50a/0x1880 net/core/rtnetlink.c:3485
rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3594
rtnetlink_rcv_msg+0x43c/0xd70 net/core/rtnetlink.c:6091
netlink_rcv_skb+0x14f/0x410 net/netlink/af_netlink.c:2540
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x54e/0x800 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x930/0xe50 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0x154/0x190 net/socket.c:734
____sys_sendmsg+0x6df/0x840 net/socket.c:2482
___sys_sendmsg+0x110/0x1b0 net/socket.c:2536
__sys_sendmsg+0xf3/0x1c0 net/socket.c:2565
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fdcf2072359
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fdcf13e3168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007fdcf219ff80 RCX: 00007fdcf2072359
RDX: 0000000000000000 RSI: 0000000020000200 RDI: 0000000000000003
RBP: 00007fdcf20bd493 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fffbb8d7bdf R14: 00007fdcf13e3300 R15: 0000000000022000
</TASK>
The buggy address belongs to the variable:
rmnet_policy+0x30/0xe0
The buggy address belongs to the physical page:
page:0000000065bdeb3c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x155243
flags: 0x200000000001000(reserved|node=0|zone=2)
raw: 0200000000001000 ffffea00055490c8 ffffea00055490c8 0000000000000000
raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffffff92c43780: f9 f9 f9 f9 00 00 00 02 f9 f9 f9 f9 00 00 00 07
ffffffff92c43800: f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9 06 f9 f9 f9
>ffffffff92c43880: f9 f9 f9 f9 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9
^
ffffffff92c43900: 00 00 00 00 00 00 00 00 07 f9 f9 f9 f9 f9 f9 f9
ffffffff92c43980: 00 00 00 07 f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9
According to the comment of `nla_parse_nested_deprecated`, the maxtype
should be len(destination array) - 1. Hence use `IFLA_RMNET_MAX` here.
Fixes: 14452ca3b5ce ("net: qualcomm: rmnet: Export mux_id and flags to netlink")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240110061400.3356108-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The rules to link selftests are:
> $(OUTPUT)/%_ipv4: %.c
> $(LINK.c) $^ $(LDLIBS) -o $@
>
> $(OUTPUT)/%_ipv6: %.c
> $(LINK.c) -DIPV6_TEST $^ $(LDLIBS) -o $@
The intel test robot uses only selftest's Makefile, not the top linux
Makefile:
> make W=1 O=/tmp/kselftest -C tools/testing/selftests
So, $(LINK.c) is determined by environment, rather than by kernel
Makefiles. On my machine (as well as other people that ran tcp-ao
selftests) GNU/Make implicit definition does use $(LDFLAGS):
> [dima@Mindolluin ~]$ make -p -f/dev/null | grep '^LINK.c\>'
> make: *** No targets. Stop.
> LINK.c = $(CC) $(CFLAGS) $(CPPFLAGS) $(LDFLAGS) $(TARGET_ARCH)
But, according to build robot report, it's not the case for them.
While I could just avoid using pre-defined $(LINK.c), it's also used by
selftests/lib.mk by default.
Anyways, according to GNU/Make documentation [1], I should have used
$(LDLIBS) instead of $(LDFLAGS) in the first place, so let's just do it:
> LDFLAGS
> Extra flags to give to compilers when they are supposed to invoke
> the linker, ‘ld’, such as -L. Libraries (-lfoo) should be added
> to the LDLIBS variable instead.
> LDLIBS
> Library flags or names given to compilers when they are supposed
> to invoke the linker, ‘ld’. LOADLIBES is a deprecated (but still
> supported) alternative to LDLIBS. Non-library linker flags, such
> as -L, should go in the LDFLAGS variable.
[1]: https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html
Fixes: cfbab37b3da0 ("selftests/net: Add TCP-AO library")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401011151.veyYTJzq-lkp@intel.com/
Signed-off-by: Dmitry Safonov <dima@arista.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240110-tcp_ao-selftests-makefile-v1-1-aa07d043f052@arista.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ngbe driver needs phylink:
arm-linux-gnueabi-ld: drivers/net/ethernet/wangxun/libwx/wx_ethtool.o: in function `wx_nway_reset':
wx_ethtool.c:(.text+0x458): undefined reference to `phylink_ethtool_nway_reset'
arm-linux-gnueabi-ld: drivers/net/ethernet/wangxun/ngbe/ngbe_main.o: in function `ngbe_remove':
ngbe_main.c:(.text+0x7c): undefined reference to `phylink_destroy'
arm-linux-gnueabi-ld: drivers/net/ethernet/wangxun/ngbe/ngbe_main.o: in function `ngbe_open':
ngbe_main.c:(.text+0xf90): undefined reference to `phylink_connect_phy'
arm-linux-gnueabi-ld: drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.o: in function `ngbe_mdio_init':
ngbe_mdio.c:(.text+0x314): undefined reference to `phylink_create'
Add the missing Kconfig description for this.
Fixes: bc2426d74aa3 ("net: ngbe: convert phylib to phylink")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240111162828.68564-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I missed that Dany uses a different email address
when tagging patches (drt@linux.ibm.com)
and asked him if he's still actively working on ibmvnic.
He doesn't really fall under our removal criteria,
but he admitted that he already moved on to other projects.
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240109164517.3063131-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We haven't heard from Ralf for two years, according to lore.
We get a constant stream of "fixes" to ax25 from people using
code analysis tools. Nobody is reviewing those, let's reflect
this reality in MAINTAINERS.
Subsystem AX.25 NETWORK LAYER
Changes 9 / 59 (15%)
(No activity)
Top reviewers:
[2]: mkl@pengutronix.de
[2]: edumazet@google.com
[2]: stefan@datenfreihafen.org
INACTIVE MAINTAINER Ralf Baechle <ralf@linux-mips.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240109164517.3063131-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Johan moved to maintaining the Zephyr Bluetooth stack,
and we haven't heard from him on the ML in 3 years
(according to lore), and seen any tags in git in 4 years.
Trade the MAINTAINER entry for CREDITS, we can revert
whenever Johan comes back to Linux hacking :)
Subsystem BLUETOOTH SUBSYSTEM
Changes 173 / 986 (17%)
Last activity: 2023-12-22
Marcel Holtmann <marcel@holtmann.org>:
Author 91cb4c19118a 2022-01-27 00:00:00 52
Committer edcb185fa9c4 2022-05-23 00:00:00 446
Tags 000c2fa2c144 2023-04-23 00:00:00 523
Johan Hedberg <johan.hedberg@gmail.com>:
Luiz Augusto von Dentz <luiz.dentz@gmail.com>:
Author d03376c18592 2023-12-22 00:00:00 241
Committer da9065caa594 2023-12-22 00:00:00 341
Tags da9065caa594 2023-12-22 00:00:00 493
Top reviewers:
[33]: alainm@chromium.org
[31]: mcchou@chromium.org
[27]: abhishekpandit@chromium.org
INACTIVE MAINTAINER Johan Hedberg <johan.hedberg@gmail.com>
Link: https://lore.kernel.org/r/20240109164517.3063131-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We haven't seen much review activity from the liquidio
maintainers for years. Reflect that reality in MAINTAINERS.
Our scripts report:
Subsystem CAVIUM LIQUIDIO NETWORK DRIVER
Changes 30 / 87 (34%)
Last activity: 2019-01-28
Derek Chickles <dchickles@marvell.com>:
Tags ac93e2fa8550 2019-01-28 00:00:00 1
Satanand Burla <sburla@marvell.com>:
Felix Manlunas <fmanlunas@marvell.com>:
Tags ac93e2fa8550 2019-01-28 00:00:00 1
Top reviewers:
[5]: simon.horman@corigine.com
[4]: keescook@chromium.org
[4]: jiri@nvidia.com
INACTIVE MAINTAINER Satanand Burla <sburla@marvell.com>
Acked-by: Derek Chickles <dchickles@marvell.com>
Link: https://lore.kernel.org/r/20240109164517.3063131-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Thomas is still active in other bits of the kernel and beyond
but not as much on the Marvell Ethernet devices.
Our scripts report:
Subsystem MARVELL MVNETA ETHERNET DRIVER
Changes 54 / 176 (30%)
(No activity)
Top reviewers:
[12]: hawk@kernel.org
[9]: toke@redhat.com
[9]: john.fastabend@gmail.com
INACTIVE MAINTAINER Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Link: https://lore.kernel.org/r/20240109164517.3063131-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mt7530 is a pretty active driver and last we have heard
from Landen Chao on the list was March. There were total
of 4 message from them in the last 2.5 years.
I think it's time to move to CREDITS.
Subsystem MEDIATEK SWITCH DRIVER
Changes 94 / 169 (55%)
Last activity: 2023-10-11
Arınç ÜNAL <arinc.unal@arinc9.com>:
Author e94b590abfff 2023-08-19 00:00:00 12
Tags e94b590abfff 2023-08-19 00:00:00 16
Daniel Golle <daniel@makrotopia.org>:
Author 91daa4f62ce8 2023-04-19 00:00:00 17
Tags ac49b992578d 2023-10-11 00:00:00 20
Landen Chao <Landen.Chao@mediatek.com>:
DENG Qingfang <dqfext@gmail.com>:
Author 342afce10d6f 2021-10-18 00:00:00 24
Tags 342afce10d6f 2021-10-18 00:00:00 25
Sean Wang <sean.wang@mediatek.com>:
Tags c288575f7810 2020-09-14 00:00:00 5
Top reviewers:
[46]: f.fainelli@gmail.com
[29]: andrew@lunn.ch
[19]: olteanv@gmail.com
INACTIVE MAINTAINER Landen Chao <Landen.Chao@mediatek.com>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20240109164517.3063131-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
John is still active in other bits of the kernel but not much
on the MediaTek ethernet switch side. Our scripts report:
Subsystem MEDIATEK ETHERNET DRIVER
Changes 81 / 384 (21%)
Last activity: 2023-12-21
Felix Fietkau <nbd@nbd.name>:
Author c6d96df9fa2c 2023-05-02 00:00:00 42
Tags c6d96df9fa2c 2023-05-02 00:00:00 48
John Crispin <john@phrozen.org>:
Sean Wang <sean.wang@mediatek.com>:
Author 880c2d4b2fdf 2019-06-03 00:00:00 5
Tags a5d75538295b 2020-04-07 00:00:00 7
Mark Lee <Mark-MC.Lee@mediatek.com>:
Author 8d66a8183d0c 2019-11-14 00:00:00 4
Tags 8d66a8183d0c 2019-11-14 00:00:00 4
Lorenzo Bianconi <lorenzo@kernel.org>:
Author 7cb8cd4daacf 2023-12-21 00:00:00 98
Tags 7cb8cd4daacf 2023-12-21 00:00:00 112
Top reviewers:
[18]: horms@kernel.org
[15]: leonro@nvidia.com
[8]: rmk+kernel@armlinux.org.uk
INACTIVE MAINTAINER John Crispin <john@phrozen.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20240109164517.3063131-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Breno Leitao says:
====================
Fix MODULE_DESCRIPTION() for net (p1)
There are hundreds of network modules that misses MODULE_DESCRIPTION(),
causing a warnning when compiling with W=1. Example:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/com90io.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/arc-rimi.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/com20020.o
====================
Link: https://lore.kernel.org/r/20240108181610.2697017-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the Neterion 10GbE (s2io) driver.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240108181610.2697017-10-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to Slic Maxim ds26522 card driver.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240108181610.2697017-9-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to Sun RPC modules.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20240108181610.2697017-6-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to all NFC Controller Interface (NCI) modules.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240108181610.2697017-5-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to High-availability Seamless Redundancy (HSR) driver.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240108181610.2697017-4-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Add descriptions to the Serial Line (SLIP) protocol modules.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240108181610.2697017-3-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
