summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-04-14watchdog: enable the new user interface of the watchdog mechanismUlrich Obergfell
With the current user interface of the watchdog mechanism it is only possible to disable or enable both lockup detectors at the same time. This series introduces new kernel parameters and changes the semantics of some existing kernel parameters, so that the hard lockup detector and the soft lockup detector can be disabled or enabled individually. With this series applied, the user interface is as follows. - parameters in /proc/sys/kernel . soft_watchdog This is a new parameter to control and examine the run state of the soft lockup detector. . nmi_watchdog The semantics of this parameter have changed. It can now be used to control and examine the run state of the hard lockup detector. . watchdog This parameter is still available to control the run state of both lockup detectors at the same time. If this parameter is examined, it shows the logical OR of soft_watchdog and nmi_watchdog. . watchdog_thresh The semantics of this parameter are not affected by the patch. - kernel command line parameters . nosoftlockup The semantics of this parameter have changed. It can now be used to disable the soft lockup detector at boot time. . nmi_watchdog=0 or nmi_watchdog=1 Disable or enable the hard lockup detector at boot time. The patch introduces '=1' as a new option. . nowatchdog The semantics of this parameter are not affected by the patch. It is still available to disable both lockup detectors at boot time. Also, remove the proc_dowatchdog() function which is no longer needed. [dzickus@redhat.com: wrote changelog] [dzickus@redhat.com: update documentation for kernel params and sysctl] Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14watchdog: implement error handling for failure to set up hardware perf eventsUlrich Obergfell
If watchdog_nmi_enable() fails to set up the hardware perf event of one CPU, the entire hard lockup detector is deemed unreliable. Hence, disable the hard lockup detector and shut down the hardware perf events on all CPUs. [dzickus@redhat.com: update comments to explain some code] Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14watchdog: introduce separate handlers for parameters in /proc/sys/kernelUlrich Obergfell
Separate handlers for each watchdog parameter in /proc/sys/kernel replace the proc_dowatchdog() function. Three of those handlers merely call proc_watchdog_common() with one different argument. Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14watchdog: introduce proc_watchdog_common()Ulrich Obergfell
Three of four handlers for the watchdog parameters in /proc/sys/kernel essentially have to do the same thing. if the parameter is being read { return the state of the corresponding bit(s) in 'watchdog_enabled' } else { set/clear the state of the corresponding bit(s) in 'watchdog_enabled' update the run state of the lockup detector(s) } Hence, introduce a common function that can be called by those handlers. The callers pass a 'bit mask' to this function to indicate which bit(s) should be set/cleared in 'watchdog_enabled'. This function handles an uncommon race with watchdog_nmi_enable() where a concurrent update of 'watchdog_enabled' is possible. We use 'cmpxchg' to detect the concurrency. [This avoids introducing a new spinlock or a mutex to synchronize updates of 'watchdog_enabled'. Using the same lock or mutex in watchdog thread context and in system call context needs to be considered carefully because it can make the code prone to deadlock situations in connection with parking/unparking the watchdog threads.] Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14watchdog: move definition of 'watchdog_proc_mutex' outside of proc_dowatchdog()Ulrich Obergfell
This series removes proc_dowatchdog(). Since multiple new functions need the 'watchdog_proc_mutex' to serialize access to the watchdog parameters in /proc/sys/kernel, move the mutex outside of any function. Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14watchdog: introduce the proc_watchdog_update() functionUlrich Obergfell
This series introduces a separate handler for each watchdog parameter in /proc/sys/kernel. The separate handlers need a common function that they can call to update the run state of the lockup detectors, or to have the lockup detectors use a new sample period. Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14watchdog: new definitions and variables, initializationUlrich Obergfell
The hardlockup and softockup had always been tied together. Due to the request of KVM folks, they had a need to have one enabled but not the other. Internally rework the code to split things apart more cleanly. There is a bunch of churn here, but the end result should be code that should be easier to maintain and fix without knowing the internals of what is going on. This patch (of 9): Introduce new definitions and variables to separate the user interface in /proc/sys/kernel from the internal run state of the lockup detectors. The internal run state is represented by two bits in a new variable that is named 'watchdog_enabled'. This helps simplify the code, for example: - In order to check if any of the two lockup detectors is enabled, it is sufficient to check if 'watchdog_enabled' is not zero. - In order to enable/disable one or both lockup detectors, it is sufficient to set/clear one or both bits in 'watchdog_enabled'. - Concurrent updates of 'watchdog_enabled' need not be synchronized via a spinlock or a mutex. Updates can either be atomic or concurrency can be detected by using 'cmpxchg'. Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ocfs2: make mlog_errno return the errnoAndrew Morton
ocfs2 does mlog_errno(v); return v; in many places. Change mlog_errno() so we can do return mlog_errno(v); For some weird reason this patch reduces the size of ocfs2 by 6k: akpm3:/usr/src/25> size fs/ocfs2/ocfs2.ko text data bss dec hex filename 1146613 82767 832192 2061572 1f7504 fs/ocfs2/ocfs2.ko-before 1140857 82767 832192 2055816 1f5e88 fs/ocfs2/ocfs2.ko-after [dan.carpenter@oracle.com: double evaluation concerns in mlog_errno()] Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: alex chen <alex.chen@huawei.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ocfs2: check if the ocfs2 lock resource has been initialized before calling ↵alex chen
ocfs2_dlm_lock If ocfs2 lockres has not been initialized before calling ocfs2_dlm_lock, the lock won't be dropped and then will lead umount hung. The case is described below: ocfs2_mknod ocfs2_mknod_locked __ocfs2_mknod_locked ocfs2_journal_access_di Failed because of -ENOMEM or other reasons, the inode lockres has not been initialized yet. iput(inode) ocfs2_evict_inode ocfs2_delete_inode ocfs2_inode_lock ocfs2_inode_lock_full_nested __ocfs2_cluster_lock Succeeds and allocates a new dlm lockres. ocfs2_clear_inode ocfs2_open_unlock ocfs2_drop_inode_locks ocfs2_drop_lock Since lockres has not been initialized, the lock can't be dropped and the lockres can't be migrated, thus umount will hang forever. Signed-off-by: Alex Chen <alex.chen@huawei.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: joyce.xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ocfs2: logging: remove static buffer, use vsprintf extension %pVJoe Perches
Use the vsprintf %pV extension to avoid using a static buffer and remove the now unnecessary buffer. Signed-off-by: Joe Perches <joe@perches.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ocfs2: incorrect check for debugfs returnsChengyu Song
debugfs_create_dir and debugfs_create_file may return -ENODEV when debugfs is not configured, so the return value should be checked against ERROR_VALUE as well, otherwise the later dereference of the dentry pointer would crash the kernel. This patch tries to solve this problem by fixing certain checks. However, I have that found other call sites are protected by #ifdef CONFIG_DEBUG_FS. In current implementation, if CONFIG_DEBUG_FS is defined, then the above two functions will never return any ERROR_VALUE. So another possibility to fix this is to surround all the buggy checks/functions with the same #ifdef CONFIG_DEBUG_FS. But I'm not sure if this would break any functionality, as only OCFS2_FS_STATS declares dependency on DEBUG_FS. Signed-off-by: Chengyu Song <csong84@gatech.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ocfs2: fix a typo in the copyright statementJakub Wilk
Signed-off-by: Jakub Wilk <jwilk@jwilk.net> Reviewed-by: Eric Ren <zren@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ocfs2: fix possible uninitialized variable accessJoseph Qi
In ocfs2_local_alloc_find_clear_bits and ocfs2_get_dentry, variable numfound and set may be uninitialized and then used in tracepoint. In ocfs2_xattr_block_get and ocfs2_delete_xattr_in_bucket, variable block_off and xv may be uninitialized and then used in the following logic due to unchecked return value. This patch fixes these possible issues. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ocfs2: remove goto statement in ocfs2_check_dir_for_entry()Daeseok Youn
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> Reviewed-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ocfs2: rollback the cleared bits if error occurs after ↵Joseph Qi
ocfs2_block_group_clear_bits ocfs2_block_group_clear_bits will clear bits in block group bitmap. Once it succeeds but fails in the following step, it will cause block group bitmap mismatch the corresponding count recorded in dinode. So rollback the cleared bits if error occurs. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ocfs2: use ENOENT instead of EEXIST when get system file failsJoseph Qi
When ocfs2_get_system_file_inode fails, it is obscure to set the return value to -EEXIST. So change it to -ENOENT. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ocfs2: use actual name length when find entry in ocfs2_orphan_del()Joseph Qi
If the namelen is 20 and name only has actual length 16, it will fail in ocfs2_find_entry because of mismatch. So use actual name length when find entry. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ocfs2: dereferencing freed pointers in ocfs2_reflink()Dan Carpenter
The code at the "out" label assumes that "default_acl" and "acl" are NULL, but actually the pointers can be NULL, unitialized, or freed. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ocfs2: fix typo in ocfs2_reserve_local_alloc_bitsJoseph Qi
In ocfs2_reserve_local_alloc_bits, it calls ocfs2_error if local alloc inode bitmap used bits mismatch, but the log mistakes it as free bits. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ocfs2: do not use ocfs2_zero_extend during direct IOJoseph Qi
In ocfs2_direct_IO_write, we use ocfs2_zero_extend to zero allocated clusters in case of cluster not aligned. But ocfs2_zero_extend uses page cache, this may happen that it clears the data which blockdev_direct_IO has already written. We should use blkdev_issue_zeroout instead of ocfs2_zero_extend during direct IO. So fix this issue by introducing ocfs2_direct_IO_zero_extend and ocfs2_direct_IO_extend_no_holes. Reported-by: Yiwen Jiang <jiangyiwen@huawei.com> Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Tested-by: Yiwen Jiang <jiangyiwen@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ocfs2: take inode lock when get clustersJoseph Qi
We need take inode lock when calling ocfs2_get_clusters. And use GFP_NOFS instead of GFP_KERNEL. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ocfs2: no need get dinode bh when zeroing extendJoseph Qi
Since di_bh won't be used when zeroing extend, set it to NULL. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ocfs2: fix a typing error in ocfs2_direct_IO_writeJoseph Qi
Only when direct IO succeeds we need consider zeroing out in case of cluster not aligned. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ocfs2: avoid a pointless delay in o2cb_cluster_check()Daeseok Youn
Fix an off-by-one when attempting to avoid an msleep() on the final loop iteration. Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ocfs2: one function call less in user_cluster_connect() after error detectionMarkus Elfring
kfree() was called by user_cluster_connect() even if a previous call of the kzalloc() function failed. Return from this implementation directly after failure detection. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ocfs2: one function call less in ocfs2_init_slot_info() after error detectionMarkus Elfring
__ocfs2_free_slot_info() was called by ocfs2_init_slot_info() even if a call of the kzalloc() function failed. Return from this implementation directly after corresponding exception handling. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ocfs2: one function call less in ocfs2_merge_rec_right() after error detectionMarkus Elfring
ocfs2_free_path() was called by ocfs2_merge_rec_right() even if a call of the ocfs2_get_right_path() function failed. Return from this implementation directly after corresponding exception handling. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ocfs2: one function call less in ocfs2_merge_rec_left() after error detectionMarkus Elfring
ocfs2_free_path() was called by ocfs2_merge_rec_left() even if a call of the ocfs2_get_left_path() function failed. Return from this implementation directly after corresponding exception handling. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ocfs2: less function calls in ocfs2_figure_merge_contig_type() after error ↵Markus Elfring
detection ocfs2_free_path() was called in some cases by ocfs2_figure_merge_contig_type() during error handling even if the passed variables "left_path" and "right_path" contained still a null pointer. Corresponding implementation details could be improved by adjustments for jump labels according to the current Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ocfs2: less function calls in ocfs2_convert_inline_data_to_extents() after ↵Markus Elfring
error detection kfree() was called in a few cases by ocfs2_convert_inline_data_to_extents() during error handling even if the passed variable "pages" contained a null pointer. * Return from this implementation directly after failure detection for the function call "kcalloc". * Corresponding details could be improved by the introduction of another jump label. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ocfs2: delete unnecessary checks before three function callsMarkus Elfring
kfree(), ocfs2_free_path() and __ocfs2_free_slot_info() test whether their argument is NULL and then return immediately. Thus the test around their calls is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14arch/sh/kernel/dwarf.c: use mempool_create_slab_pool()David Rientjes
Mempools created for slab caches should use mempool_create_slab_pool(). Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14arch/sh/kernel/dwarf.c: destroy mempools on cleanupDavid Rientjes
dwarf_reg_pool and dwarf_frame_pool are not properly destroyed when cleaning up the dwarf unwinder. Destroy them with mempool_destroy(). Also mark dwarf_unwinder_cleanup() as __init. Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14scripts/coccinelle/misc/bugon.cocci: update bug_on conversion warningFabian Frederick
if()/BUG conversion to BUG_ON must be avoided when there's side effect in condition. The reason being BUG_ON won't execute the condition when CONFIG_BUG is not defined. With inspiration from Bruce Fields. Signed-off-by: Fabian Frederick <fabf@skynet.be> Suggested-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Julia Lawall <Julia.Lawall@lip6.fr> Cc: J. Bruce Fields <bfields@fieldses.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14mm/hugetlb: use pmd_page() in follow_huge_pmd()Gerald Schaefer
Commit 61f77eda9bbf ("mm/hugetlb: reduce arch dependent code around follow_huge_*") broke follow_huge_pmd() on s390, where pmd and pte layout differ and using pte_page() on a huge pmd will return wrong results. Using pmd_page() instead fixes this. All architectures that were touched by that commit have pmd_page() defined, so this should not break anything on other architectures. Fixes: 61f77eda "mm/hugetlb: reduce arch dependent code around follow_huge_*" Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Hugh Dickins <hughd@google.com> Cc: Michal Hocko <mhocko@suse.cz>, Andrea Arcangeli <aarcange@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: David Rientjes <rientjes@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-14ACPI / battery: Fix doubly added battery on system suspendKrzysztof Kozlowski
Commit 297d716f6260 ("power_supply: Change ownership from driver to core") inverted the logic in battery_notify(). As an effect already present battery was re-added on each system suspend or hibernation. WARNING: CPU: 0 PID: 303 at ../fs/sysfs/dir.c:31 sysfs_warn_dup+0x68/0x80() sysfs: cannot create duplicate filename '/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/PNP0C0A:00/power_supply/BAT0' CPU: 0 PID: 303 Comm: rtcwake Not tainted 4.0.0-ARCH-02621-g07e6253af953 #48 Call Trace: sysfs_create_dir_ns+0x8d/0xa0 kobject_add_internal+0xb6/0x370 kobject_add+0x6f/0xd0 device_add+0x120/0x6c0 __power_supply_register+0x145/0x290 power_supply_register_no_ws+0x10/0x20 sysfs_add_battery+0x84/0xc5 [battery] battery_notify+0x45/0x6b [battery] notifier_call_chain+0x4f/0x80 __blocking_notifier_call_chain+0x4b/0x70 blocking_notifier_call_chain+0x16/0x20 pm_notifier_call_chain+0x1a/0x40 pm_suspend+0x3ed/0x4e0 Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-13Merge tag 'staging-4.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here's the big staging driver patchset for 4.1-rc1. There's a lot of patches here, the Outreachy application period happened during this development cycle, so that means that there was a lot of cleanup patches accepted. Other than the normal coding style and sparse fixes here, there are some driver updates and work toward making some of the drivers into "mergable" shape (like the Unisys drivers.) All of these have been in linux-next for a while" * tag 'staging-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1214 commits) staging: lustre: orthography & coding style staging: lustre: lnet: lnet: fix error return code staging: lustre: fix sparse warning Revert "Staging: sm750fb: Fix C99 Comments" Staging: rtl8192u: use correct array for debug output staging: rtl8192e: Remove dead code staging: rtl8192e: Comment cleanup (style/format) staging: rtl8192e: Fix indentation in rtllib_rx_auth_resp() staging: rtl8192e: Decrease nesting of rtllib_rx_auth_resp() staging: rtl8192e: Divide rtllib_rx_auth() staging: rtl8192e: Fix PRINTK_WITHOUT_KERN_LEVEL warnings staging: rtl8192e: Fix DO_WHILE_MACRO_WITH_TRAILING_SEMICOLON warning staging: rtl8192e: Fix BRACES warning staging: rtl8192e: Fix LINE_CONTINUATIONS warning staging: rtl8192e: Fix UNNECESSARY_PARENTHESES warnings staging: rtl8192e: remove unused EXPORT_SYMBOL_RSL macro staging: rtl8192e: Fix RETURN_VOID warnings staging: rtl8192e: Fix UNNECESSARY_ELSE warning staging: rtl8723au: Remove unneeded comments staging: rtl8723au: Use __func__ in trace logs ...
2015-04-13Merge tag 'driver-core-4.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here's the driver-core / kobject / lz4 tree update for 4.1-rc1. Everything here has been in linux-next for a while with no reported issues. It's mostly just coding style cleanups, with other minor changes in here as well, nothing big" * tag 'driver-core-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits) debugfs: allow bad parent pointers to be passed in stable_kernel_rules: Add clause about specification of kernel versions to patch. kobject: WARN as tip when call kobject_get() to a kobject not initialized lib/lz4: Pull out constant tables drivers: platform: parse IRQ flags from resources driver core: Make probe deferral more quiet drivers/core/of: Add symlink to device-tree from devices with an OF node device: Add dev_of_node() accessor drivers: base: fw: fix ret value when loading fw firmware: Avoid manual device_create_file() calls drivers/base: cacheinfo: validate device node for all the caches drivers/base: use tabs where possible in code indentation driver core: add missing blank line after declaration drivers: base: node: Delete space after pointer declaration drivers: base: memory: Use tabs instead of spaces firmware_class: Fix whitespace and indentation drivers: base: dma-mapping: Erase blank space after pointer drivers: base: class: Add a blank line after declarations attribute_container: fix missing blank lines after declarations drivers: base: memory: Fix switch indent ...
2015-04-13Merge tag 'usb-4.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB driver updates from Greg KH: "Here's the big USB (and PHY) driver patchset for 4.1-rc1. Everything here has been in linux-next, and the full details are below in the shortlog. Nothing major, just the normal round of new drivers,api updates, and other changes, mostly in the USB gadget area, as usual" * tag 'usb-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (252 commits) drivers/usb/core: devio.c: Removed an uneeded space before tab usb: dwc2: host: sleep USB_RESUME_TIMEOUT during resume usb: chipidea: debug: add low power mode check before print registers usb: chipidea: udc: bypass pullup DP when gadget connect in OTG fsm mode usb: core: hub: use new USB_RESUME_TIMEOUT usb: isp1760: hcd: use new USB_RESUME_TIMEOUT usb: dwc2: hcd: use new USB_RESUME_TIMEOUT usb: host: sl811: use new USB_RESUME_TIMEOUT usb: host: r8a66597: use new USB_RESUME_TIMEOUT usb: host: oxu210hp: use new USB_RESUME_TIMEOUT usb: host: fusbh200: use new USB_RESUME_TIMEOUT usb: host: fotg210: use new USB_RESUME_TIMEOUT usb: host: isp116x: use new USB_RESUME_TIMEOUT usb: musb: use new USB_RESUME_TIMEOUT usb: host: uhci: use new USB_RESUME_TIMEOUT usb: host: ehci: use new USB_RESUME_TIMEOUT usb: host: xhci: use new USB_RESUME_TIMEOUT usb: define a generic USB_RESUME_TIMEOUT macro usb: musb: dsps: fix build on i386 when COMPILE_TEST is set ehci-hub: use USB_DT_HUB ...
2015-04-13Merge branch 'for-4.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: "Nothing too interesting. Rik made cpuset cooperate better with isolcpus and there are several other cleanup patches" * 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset, isolcpus: document relationship between cpusets & isolcpus cpusets, isolcpus: exclude isolcpus from load balancing in cpusets sched, isolcpu: make cpu_isolated_map visible outside scheduler cpuset: initialize cpuset a bit early cgroup: Use kvfree in pidlist_free() cgroup: call cgroup_subsys->bind on cgroup subsys initialization
2015-04-13Merge branch 'for-4.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: - Hannes's patchset implements support for better error reporting introduced by the new ATA command spec. - the deperecated pci_ dma API usages have been replaced by dma_ ones. - a bunch of hardware specific updates and some cleanups. * 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: remove deprecated use of pci api ahci: st: st_configure_oob must be called after IP is clocked. ahci: st: Update the ahci_st DT documentation ahci: st: Update the DT example for how to obtain the PHY. sata_dwc_460ex: indent an if statement libata: Add tracepoints libata-eh: Set 'information' field for autosense libata: Implement support for sense data reporting libata: Implement NCQ autosense libata: use status bit definitions in ata_dump_status() ide,ata: Rename ATA_IDX to ATA_SENSE libata: whitespace fixes in ata_to_sense_error() libata: whitespace cleanup in ata_get_cmd_descript() libata: use READ_LOG_DMA_EXT libata: remove ATA_FLAG_LOWTAG sata_dwc_460ex: re-use hsdev->dev instead of dwc_dev sata_dwc_460ex: move to generic DMA driver sata_dwc_460ex: join messages back sata: xgene: add ACPI support for APM X-Gene SATA ports ata: sata_mv: add proper definitions for LP_PHY_CTL register values
2015-04-13Merge branch 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds
Pull workqueue updates from Tejun Heo: "Workqueue now prints debug information at the end of sysrq-t which should be helpful when tracking down suspected workqueue stalls. It only prints out the ones with something currently going on so it shouldn't add much output in most cases" * 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Reorder sysfs code percpu: Fix trivial typos in comments workqueue: dump workqueues on sysrq-t workqueue: keep track of the flushing task and pool manager workqueue: make the workqueues list RCU walkable
2015-04-13Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq core updates from Thomas Gleixner: "Managerial summary: Core code: - final removal of IRQF_DISABLED - new state save/restore functions for virtualization support - wakeup support for stacked irqdomains - new function to solve the netpoll synchronization problem irqchips: - new driver for STi based devices - new driver for Vybrid MSCM - massive cleanup of the GIC driver by moving the GIC-addons to stacked irqdomains - the usual pile of fixes and updates to the various chip drivers" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) irqchip: GICv3: Add support for irq_[get, set]_irqchip_state() irqchip: GIC: Add support for irq_[get, set]_irqchip_state() genirq: Allow the irqchip state of an IRQ to be save/restored genirq: MSI: Fix freeing of unallocated MSI irqchip: renesas-irqc: Add wake-up support irqchip: armada-370-xp: Allow using wakeup source irqchip: mips-gic: Add new functions to start/stop the GIC counter irqchip: tegra: Add Tegra210 support irqchip: digicolor: Move digicolor_set_gc to init section irqchip: renesas-irqc: Add functional clock to bindings irqchip: renesas-irqc: Add minimal runtime PM support irqchip: renesas-irqc: Add more register documentation DT: exynos: update PMU binding ARM: exynos4/5: convert pmu wakeup to stacked domains irqchip: gic: Don't complain in gic_get_cpumask() if UP system ARM: zynq: switch from gic_arch_extn to gic_set_irqchip_flags ARM: ux500: switch from gic_arch_extn to gic_set_irqchip_flags ARM: shmobile: remove use of gic_arch_extn.irq_set_wake irqchip: gic: Add an entry point to set up irqchip flags ARM: omap: convert wakeupgen to stacked domains ...
2015-04-13Merge tag 'pci-v4.1-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Enumeration - Read capability list as dwords, not bytes (Sean O. Stalley) Resource management - Don't check for PNP overlaps with unassigned PCI BARs (Bjorn Helgaas) - Mark invalid BARs as unassigned (Bjorn Helgaas) - Show driver, BAR#, and resource on pci_ioremap_bar() failure (Bjorn Helgaas) - Fail pci_ioremap_bar() on unassigned resources (Bjorn Helgaas) - Assign resources before drivers claim devices (Yijing Wang) - Claim bus resources before pci_bus_add_devices() (Yijing Wang) Power management - Optimize device state transition delays (Aaron Lu) - Don't clear ASPM bits when the FADT declares it's unsupported (Matthew Garrett) Virtualization - Add ACS quirks for Intel 1G NICs (Alex Williamson) IOMMU - Add ptr to OF node arg to of_iommu_configure() (Murali Karicheri) - Move of_dma_configure() to device.c to help re-use (Murali Karicheri) - Fix size when dma-range is not used (Murali Karicheri) - Add helper functions pci_get[put]_host_bridge_device() (Murali Karicheri) - Add of_pci_dma_configure() to update DMA configuration (Murali Karicheri) - Update DMA configuration from DT (Murali Karicheri) - dma-mapping: limit IOMMU mapping size (Murali Karicheri) - Calculate device DMA masks based on DT dma-range size (Murali Karicheri) ARM Versatile host bridge driver - Check for devm_ioremap_resource() failures (Jisheng Zhang) Broadcom iProc host bridge driver - Add Broadcom iProc PCIe driver (Ray Jui) Marvell MVEBU host bridge driver - Add suspend/resume support (Thomas Petazzoni) Renesas R-Car host bridge driver - Fix position of MSI enable bit (Nobuhiro Iwamatsu) - Write zeroes to reserved PCIEPARL bits (Nobuhiro Iwamatsu) - Change PCIEPARL and PCIEPARH to PCIEPALR and PCIEPAUR (Nobuhiro Iwamatsu) - Verify that mem_res is 64K-aligned (Nobuhiro Iwamatsu) Samsung Exynos host bridge driver - Fix INTx enablement statement termination error (Jaehoon Chung) Miscellaneous - Make a shareable UUID for PCI firmware ACPI _DSM (Aaron Lu) - Clarify policy for vendor IDs in pci.txt (Michael S. Tsirkin)" * tag 'pci-v4.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (36 commits) PCI: Read capability list as dwords, not bytes PCI: layerscape: Simplify platform_get_resource_byname() failure checking PCI: keystone: Don't dereference possible NULL pointer PCI: versatile: Check for devm_ioremap_resource() failures PCI: Don't clear ASPM bits when the FADT declares it's unsupported PCI: Clarify policy for vendor IDs in pci.txt PCI/ACPI: Optimize device state transition delays PCI: Export pci_find_host_bridge() for use inside PCI core PCI: Make a shareable UUID for PCI firmware ACPI _DSM PCI: Fix typo in Thunderbolt kernel message PCI: exynos: Fix INTx enablement statement termination error PCI: iproc: Add Broadcom iProc PCIe support PCI: iproc: Add DT docs for Broadcom iProc PCIe driver PCI: Export symbols required for loadable host driver modules PCI: Add ACS quirks for Intel 1G NICs PCI: mvebu: Add suspend/resume support PCI: Cleanup control flow sparc/PCI: Claim bus resources before pci_bus_add_devices() PCI: Assign resources before drivers claim devices (pci_scan_root_bus()) PCI: Fail pci_ioremap_bar() on unassigned resources ...
2015-04-13Merge tag 'hsi-for-4.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi Pull HSI changes from Sebastian Reichel: - nokia-modem: support speech data - misc fixes * tag 'hsi-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: HSI: cmt_speech: fix error return code HSI: nokia-modem: Add cmt-speech support HSI: cmt_speech: Add cmt-speech driver HSI: nokia-modem: fix error return code
2015-04-13Merge tag 'for-v4.1' of git://git.infradead.org/battery-2.6Linus Torvalds
Pull power supply and reset changes from Sebastian Reichel: - new API for safe access of power supply function attrs - devres support for power supply (un)registration - new drivers / chips: - generic syscon based poweroff driver - iio & charger driver for da9150 - fuel gauge driver for axp288 - bq27x00: add support for bq27510 - bq2415x: add support for bq24157s - twl4030-madc-battery: convert to iio consumer - misc fixes * tag 'for-v4.1' of git://git.infradead.org/battery-2.6: (66 commits) power: twl4030_madc_battery: Add missing MODULE_ALIAS power: twl4030-madc-battery: Convert to iio consumer. dt: power: Add docs for generic SYSCON poweroff driver. power: reset: Add generic SYSCON register mapped poweroff. power: max17042_battery: add missed blank power: max17042_battery: Use reg type instead of chip type power/reset: at91: big endian fixes for atsama5d3x power_supply: charger-manager: Fix dereferencing of ERR_PTR HID: input: Fix NULL pointer dereference when power_supply_register fails power: constify of_device_id array power/reset/rmobile-reset.c: Fix !HAS_IOMEM build power_supply: 88pm860x_charger: Fix possible NULL pointer dereference and use of initialized variable arm: mach-pxa: Decrement the power supply's device reference counter mfd: ab8500: Decrement the power supply's device reference counter power_supply: bq2415x_charger: Decrement the power supply's device reference counter power_supply: 88pm860x_charger: Decrement the power supply's device reference counter x86/olpc/xo15/sci: Use newly added power_supply_put API x86/olpc/xo1/sci: Use newly added power_supply_put API power_supply: charger-manager: Decrement the power supply's device reference counter power_supply: Increment power supply use counter when obtaining references ...
2015-04-13Merge tag 'regulator-v4.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "Another release, another set of regulator updates. Not much of it is showing up in the code yet but there's been a lot of discussion going on about how to enhance the regulator API to work better with modern SoCs which have a microcontroller sitting between Linux and the hardware. I'm hopeful that'll start to come through into mainline for v4.2 but it's not quite there for v4.1 - what we do have (along with the usual small updates is) is: - work from Bjorn Andersson on refactoring the configuration of regulator loading interfaces to be useful for use with microcontrollers, the existing interfaces were never actually useful for anything as-is since nobody was willing to put enough data into public code. - a summary tree display in debugfs from Heiko Stübner. - support for act6000 regulators" * tag 'regulator-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (34 commits) regulator: max8660: Handle empty regulator data regulator: output current-limit for all regulators in summary regulator: add a summary tree in debugfs regulator: qcom: Tidy up probe() regulator: qcom: Rework to single platform device regulator: qcom: Refactor of-parsing code regulator: qcom: Don't enable DRMS in driver regulator: max8660: fix assignment of pdata to data that becomes dead regulator: Defer lookup of supply to regulator_get mfd: max77693: Remove unused structures regulator: max77693: Let core parse DT and drop board files support regulator: Ensure unique regulator debugfs directory names regulator: stw481x: Remove unused fields from struct stw481x regulator: palmas: Add has_regen3 check for TPS659038 regulator: constify of_device_id array regulator: fixes for regulator_set_optimum_mode name change regulator: Drop temporary regulator_set_optimum_mode wrapper usb: phy: phy-msm-usb: Rename regulator_set_optimum_mode usb: phy: ab8500-usb: Rename regulator_set_optimum_mode ufs: Rename of regulator_set_optimum_mode ...
2015-04-13Merge tag 'spi-v4.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Only one framework update this time around, a change from Lars-Peter to move full to pm_ops and remove the legacy bus PM ops. Otherwise it's all driver updates: - make the spidev driver complain loudly if registered as spidev with DT rather than with a compatible string, hopefully helping people avoid making that mistake. - error handling and robustness fixes for the Designware and Intel MID drivers from Andy Shevchenko. - substantial performance improvements for the Raspberry Pi driver from Martin Sperl. - several new features for spidev_test from Adrian Remonda and Ian Abbott" * tag 'spi-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (75 commits) spi: bcm2835: enabling polling mode for transfers shorter than 30us spi: bcm2835: transform native-cs to gpio-cs on first spi_setup spi: img-spfi: Control CS lines with GPIO spi: img-spfi: Reset controller after each message spi: img-spfi: Implement a handle_err() callback spi: img-spfi: Setup TRANSACTION register before CONTROL register spi: Make master->handle_err() callback optional to avoid crashes spi: img-spfi: Limit bit clock to 1/4th of input clock spi: img-spfi: Implement a prepare_message() callback spi: fsl-dspi: Add ~50ns delay between cs and sck spi: fsl-dspi: Add cs-sck delays spi: fsl-dspi: Fix clock rate scale values spi: signedness bug in qspi_trigger_transfer_out_int() spi: imx: read back the RX/TX watermark levels earlier spi: spi-bfin5xx: Initialize cr_width in bfin_spi_pump_transfers() spi: bitbang: only toggle bitchanges spi: pxa2xx: missing break in pxa2xx_ssp_get_clk_div() spi: fsl-dspi: Fix clock rate scale values spi: Using Trigger number to transmit/receive data spi: bcm2835: fill FIFO before enabling interrupts to reduce interrupts/message ...
2015-04-13Merge tag 'regmap-v4.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap update from Mark Brown: "Just one patch for regmap this time around, a change from Steven Rostedt to prettify the way we're making the regmap internal header available to the trace events (it turns out that the trace subsystem doesn't actually need to be in trace/events)" * tag 'regmap-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Move tracing header into drivers/base/regmap
2015-04-13Merge tag 'mmc-v4.1' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "MMC core: - Add support for marking HPI as broken through devicetree - Enable runtime PM management of host devices - Remove the ->enable|disable() callbacks - Restructure code and cleanups - Refreshed some of the MMC sections in MAINTAINERS MMC host: - dw_mmc: HS400 mode support - dw_mmc: Add the cmd11 timer to detect a timeout - dw_mmc: Endian agnostic IO accessors - dw_mmc: Bugfixes - sh_mmcif: Add exclusion between cmd and interrupt - omap_hsmmc: Hibernation support - omap_hsmmc: Rework and simplify cover/card detect - omap_hsmmc: Stop using ->enable|disable() callbacks - atmel-mci: Endian agnostic IO - sunxi: Enable MMC_CAP_SDIO_IRQ - sdhci-st: Add support for the stih407 family silicon - sdhci-st: UHS card support in SDR104 mode - sdhci-st: HS200 mode support - sdhci-esdhc-imx: Use common mmc DT parser - sdhci-of-arasan: Use common mmc DT parser - sdhci-iproc: Add new driver for Broadcom IPROC SDHCI controller - sdhci-tegra: Convert to GPIO descriptors - sdhci-tegra: Optmize write_w path for tegra114 and later - sdhci-sirf: Update tuning procedure - sdhci: Fix card presence logic - sdhci: Cleanups and consolidation" * tag 'mmc-v4.1' of git://git.linaro.org/people/ulf.hansson/mmc: (79 commits) mmc: sdhci-st: Update ST SDHCI binding documentation. mmc: sdhci-st: Update the quirks for this controller. mmc: sdhci-st: Add sdhci_st_set_uhs_signaling function. mmc: sdhci-st: Add st_mmcss_cconfig function to configure mmcss glue registers. mmc: sdhci-st: Add delay management functions for top registers (eMMC). mmc: sdhci-st: Add support for de-asserting reset signal and top regs resource mmc: sdhci-st: Add macros for register offsets and bitfields for mmcss glue regs mmc: sdhci-esdhc-imx: Call mmc_of_parse() mmc: dw_mmc: Add locking around cmd11 timer mmc: dw_mmc: Add a return in an unexpected cmd11 timeout mmc: dw_mmc: Increase cmd11 timeout to 500ms mmc: dw_mmc: fix fifo ordering in big endian mmc: dw_mmc: change idmac descriptor files to __le32 mmc: dw_mmc: make IO accessors endian agnostic mmc: core: Convert the error field in struct mmc_command|data into an int mmc: sdhci-of-arasan: Call OF parsing for MMC mmc: sdhci-pci: fix 64 BIT DMA quirks for rtsx mmc: Add support for marking hpi as broken through devicetree mmc: sdhci-tegra: convert to use GPIO descriptors mmc: omap_hsmmc: use generic slot-gpio isr to manage card detect pin ...
generated by cgit (git 2.34.1) at 2024-07-05 11:55:52 +0000