summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-05-19dmaengine: move link orderLinus Walleij
Move the dmaengine subsystem up early in the drivers Makefile so DMA is made available early to all drivers, just like e.g. regulators. Now even regulators can use DMA on the same initlevel. As a result we can bump the ste_dma40 and coh901318 dmaengine drivers down one initlevel to subsys_init(). Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-13dmaengine/dw_dmac: implement pause and resume in dwc_controlLinus Walleij
Some peripherals like amba-pl011 needs pause to be implemented in DMA controller drivers. This also returns correct status from dwc_tx_status() in case chan is paused. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-13dmaengine/dw_dmac: Replace spin_lock* with irqsave variants and enable ↵Viresh Kumar
submission from callback dmaengine routines can be called from interrupt context and with interrupts disabled. Whereas spin_unlock_bh can't be called from such contexts. So this patch converts all spin_*_bh routines to irqsave variants. Also, spin_lock() used in tasklet is converted to irqsave variants, as tasklet can be interrupted, and dma requests from such interruptions may also call spin_lock. Now, submission from callbacks are permitted as per dmaengine framework. So we shouldn't hold any locks while calling callbacks. As locks were taken by parent routines, so releasing them before calling callbacks doesn't look clean enough. So, locks are taken inside all routine now, whereever they are required. And dwc_descriptor_complete is always called without taking locks. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-13dmaengine/dw_dmac: Divide one sg to many desc, if sg len is greater than ↵Viresh Kumar
DWC_MAX_COUNT If len passed in sg for slave_sg transfers is greater than DWC_MAX_COUNT, then driver programmes controller incorrectly. This patch adds code to handle this situation by allocation more than one desc for same sg. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-13dmaengine/dw_dmac: set residue as total len in dwc_tx_status if status is ↵Viresh Kumar
!DMA_SUCCESS If transfer status is !=DMA_SUCCESS, return total transfer len as residue, instead of zero. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-13dmaengine/dw_dmac: don't call callback routine in case ↵Viresh Kumar
dmaengine_terminate_all() is called If dmaengine_terminate_all() is called for dma channel, then it doesn't make much sense to call registered callback routine. While in case of success or failure it must be called. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-12dmaengine: at_hdmac: pause: no need to wait for FIFO emptyNicolas Ferre
With the addition of the "pause" feature, an active wait was introduced to check the "FIFO empty" event. This event was not always happening and a timout contition was needed. But, in some cases, this event depend on the peripheral connected to the channel that is paused: FIFO becomes empty if the peripheral consumes data. The timeout is pretty difficult to evaluate. Moreover, this check is not needed. In conclusion, it seems sensible to entirely remove the checking of "FIFO empty" status when pausing. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> [commit msg edited for grammer] Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-09pch_dma: modify pci device table definitionTomoya MORINAGA
Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-09pch_dma: Support new device ML7223 IOHTomoya MORINAGA
Support new device OKI SEMICONDUCTOR ML7223 IOH(Input/Output Hub). The ML7223 IOH is for MP(Media Phone) use. The ML7223 is companion chip for Intel Atom E6xx series. The ML7223 is completely compatible for Intel EG20T PCH. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-09pch_dma: Support I2S for ML7213 IOHTomoya MORINAGA
Support I2S device for ML7213 IOH Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-09pch_dma: Fix DMA setting issueTomoya MORINAGA
Currently, Direct-Start mode(*) is enabled. Our IOH's devices must not use this mode. This causes unexpected behavior. This patch deletes Direct-Start setting. (*) This mode is used in order for CPU to generate the DMA request. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-09pch_dma: modify for checkpatchTomoya MORINAGA
Fix checkpatch warnings. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-09pch_dma: fix dma direction issue for ML7213 IOH video-inTomoya MORINAGA
Currently, even-channel number is set as tx direction and odd is set as rx. However, though video-in uses ch6, the direction is not tx but rx. This patch sets video-in's DMA direction correctly. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-09dmaengine: at_hdmac: use descriptor chaining help functionNicolas Ferre
A little function helps to chain descriptors: it is already used in cyclic dma operations, now use it in memcpy and slave_sg preparation functions. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-09dmaengine: at_hdmac: implement pause and resume in atc_controlNicolas Ferre
Pause and resume controls are useful for audio devices. This also returns correct status from atc_tx_status() in case chan is paused. Idea from dw_dmac patch by Linus Walleij. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-09dmaengine: at_hdmac: set residue as total len in atc_tx_statusNicolas Ferre
If transfer status is !=DMA_SUCCESS, return total transfer len as residue, instead of zero. Idea from dw_dmac patch by Viresh Kumar. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-09dmaengine/ste_dma40: fix introduced warningsPhilippe Langlais
The compiler nowadays moans about possibly non-assigned variable. Fix this by default-assigning 0. Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-02dmaengine: at_hdmac: specialize AHB interfaces to optimize transfersNicolas Ferre
DMA controller has two AHB interfaces on the SOC internal matrix. It is more efficient to specialize each interface as the access to memory can introduce latencies that are not compatible with peripheral accesses requirements. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-02dmaengine: at_hdmac: remove channel status testing in taskletNicolas Ferre
There is no need to test if channel is enabled in tasklet: - in error path, channel is disabled in interrupt routine - in normal path, this test is performed in sub functions to report a misuse of the engine. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-02dmaengine: at_hdmac: debug information sg_len for prep_slave_sgNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-02dmaengine: at_hdmac: add cyclic DMA operation supportNicolas Ferre
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-02dmaengine: at_hdmac: modify way to use interruptsNicolas Ferre
Now we use Buffer Transfer Completed interrupts. If we want a chained buffer completed information, we setup the ATC_IEN bit in CTRLB register in the lli. This is done by set_desc_eol() function and used by memcpy/slave_sg functions. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-04-06drivers, pch_dma: Fix uninitialized var before useLiu Yuan
In the function pdc_desc_get(), var 'i' is not initialized before use. This patch fixes it. Signed-off-by: Liu Yuan <tailai.ly@taobao.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-04-06Merge branch 'old_next' into nextVinod Koul
2011-04-01intel_mid_dma: fix runtime pm issuesKristen Carlson Accardi
Use the correct api in probe to enable runtime pm for this driver. Additionally, do not just call legacy suspend for runtime_suspend, as this duplicates some work the pci core does for you. Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-03-31dma: use BUG_ON correctly in ppc4xx/adam.c, v4Coly Li
This patch makes BUG_ON() usage correct in drivers/dma/ppc4xx/adam.c Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Anatolij Gustschin <agust@denx.de> Cc: Sean MacLennan <smaclennan@pikatech.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Coly Li <bosong.ly@taobao.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-03-31dma: use BUG_ON correctly in mv_xor.c, v4Coly Li
This patch makes BUG_ON() usage correct in drivers/dma/mv_xor.c Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Coly Li <bosong.ly@taobao.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-03-31dma: use BUG_ON correctly in iop-adma.c, v4Coly Li
This patch makes BUG_ON() usage correct in drivers/dma/iop-adma.c. Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Coly Li <bosong.ly@taobao.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-03-31dmaengine/dw_dmac fix: dwc_scan_descriptors must compare first desc address ↵Viresh Kumar
also with llp dwc_scan_descriptors scans all descriptors from active_list in case transfer is not completed. It compares first_desc->lli.llp, and then all childrens of its tx_list. But it doesn't compare its own address, i.e. first_desc->txd.phys, as this is what we have initially programmed into the controller register. So this causes dma to stop and finish a transfer, which was never started. And thus fail. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-03-29Linux 2.6.39-rc1Linus Torvalds
2011-03-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (26 commits) mmc: SDHI should depend on SUPERH || ARCH_SHMOBILE mmc: tmio_mmc: Move some defines into a shared header mmc: tmio: support aggressive clock gating mmc: tmio: fix power-mode interpretation mmc: tmio: remove work-around for unmasked SDIO interrupts sh: fix SDHI IO address-range ARM: mach-shmobile: fix SDHI IO address-range mmc: tmio: only access registers above 0xff, if available mfd: remove now redundant sh_mobile_sdhi.h header sh: convert boards to use linux/mmc/sh_mobile_sdhi.h ARM: mach-shmobile: convert boards to use linux/mmc/sh_mobile_sdhi.h mmc: tmio: convert the SDHI MMC driver from MFD to a platform driver sh: ecovec: use the CONFIG_MMC_TMIO symbols instead of MFD mmc: tmio: split core functionality, DMA and MFD glue mmc: tmio: use PIO for short transfers mmc: tmio-mmc: Improve DMA stability on sh-mobile mmc: fix mmc_app_send_scr() for dma transfer mmc: sdhci-esdhc: enable esdhc on imx53 mmc: sdhci-esdhc: use writel/readl as general APIs mmc: sdhci: add the abort CMDTYPE bits definition ...
2011-03-29Merge branch 'frv' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-frv * 'frv' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-frv: FRV: Use generic show_interrupts() FRV: Convert genirq namespace frv: Select GENERIC_HARDIRQS_NO_DEPRECATED frv: Convert cpu irq_chip to new functions frv: Convert mb93493 irq_chip to new functions frv: Convert mb93093 irq_chip to new function frv: Convert mb93091 irq_chip to new functions frv: Fix typo from __do_IRQ overhaul frv: Remove stale irq_chip.end FRV: Do some cleanups FRV: Missing node arg in alloc_thread_info_node() macro NOMMU: implement access_remote_vm NOMMU: support SMP dynamic percpu_alloc NOMMU: percpu should use is_vmalloc_addr().
2011-03-29Merge branch 'stable/bug-fixes-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/bug-fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: Use new irq_move functions xen: Convert genirq namespace xen: fix p2m section mismatches xen/p2m: Allocate p2m tracking pages on override xen-gntdev: unlock on error path in gntdev_mmap() xen-gntdev: return -EFAULT on copy_to_user failure
2011-03-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: softdog.c: enhancement to optionally invoke panic instead of reboot on timer expiry watchdog: fix nv_tco section mismatch watchdog: sp5100_tco.c: Check if firmware has set correct value in tcobase. watchdog: Convert release_resource to release_region/release_mem_region watchdog: s3c2410_wdt.c: Convert release_resource to release_region/release_mem_region
2011-03-29Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Fix potential memleak
2011-03-29Merge branch 'irq-final-for-linus-v2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-final-for-linus-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (111 commits) gpio: ab8500: Mark broken genirq: Remove move_*irq leftovers genirq: Remove compat code drivers: Final irq namespace conversion mn10300: Use generic show_interrupts() mn10300: Cleanup irq_desc access mn10300: Convert genirq namespace frv: Use generic show_interrupts() frv: Convert genirq namespace frv: Select GENERIC_HARDIRQS_NO_DEPRECATED frv: Convert cpu irq_chip to new functions frv: Convert mb93493 irq_chip to new functions frv: Convert mb93093 irq_chip to new function frv: Convert mb93091 irq_chip to new functions frv: Fix typo from __do_IRQ overhaul frv: Remove stale irq_chip.end m68k: Convert irq function namespace xen: Use new irq_move functions xen: Cleanup genirq namespace unicore32: Use generic show_interrupts() ...
2011-03-29char/tpm: Fix unitialized usage of data bufferPeter Huewe
This patch fixes information leakage to the userspace by initializing the data buffer to zero. Reported-by: Peter Huewe <huewe.external@infineon.com> Signed-off-by: Peter Huewe <huewe.external@infineon.com> Signed-off-by: Marcel Selhorst <m.selhorst@sirrix.com> [ Also removed the silly "* sizeof(u8)". If that isn't 1, we have way deeper problems than a simple multiplication can fix. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-29amd64_edac: Fix potential memleakBorislav Petkov
We check the pointers together but at least one of them could be invalid due to failed allocation. Since we cannot continue if either of the two allocations has failed, exit early by freeing them both. Cc: <stable@kernel.org> # 38.x Reported-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2011-03-29fs: don't use igrab() while holding i_lockDave Chinner
Fix the incorrect use of igrab() inside the i_lock in NFS and Ceph‥ If we are already holding the i_lock, we have a reference to the inode so we can safely use ihold() to gain an extra reference. This avoids hangs due to lock recursion on the i_lock now that the inode_lock is gone and igrab() uses the i_lock itself. Signed-off-by: Dave Chinner <dchinner@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits) xfrm: Restrict extended sequence numbers to esp xfrm: Check for esn buffer len in xfrm_new_ae xfrm: Assign esn pointers when cloning a state xfrm: Move the test on replay window size into the replay check functions netdev: bfin_mac: document TE setting in RMII modes drivers net: Fix declaration ordering in inline functions. cxgb3: Apply interrupt coalescing settings to all queues net: Always allocate at least 16 skb frags regardless of page size ipv4: Don't ip_rt_put() an error pointer in RAW sockets. net: fix ethtool->set_flags not intended -EINVAL return value mlx4_en: Fix loss of promiscuity tg3: Fix inline keyword usage tg3: use <linux/io.h> and <linux/uaccess.h> instead <asm/io.h> and <asm/uaccess.h> net: use CHECKSUM_NONE instead of magic number Net / jme: Do not use legacy PCI power management myri10ge: small rx_done refactoring bridge: notify applications if address of bridge device changes ipv4: Fix IP timestamp option (IPOPT_TS_PRESPEC) handling in ip_options_echo() can: c_can: Fix tx_bytes accounting can: c_can_platform: fix irq check in probe ...
2011-03-29xen: Use new irq_move functionsThomas Gleixner
These functions take irq_data as an argument and avoid a redundant lookup in the sparse irq case. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-29xen: Convert genirq namespaceThomas Gleixner
Converted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-29xen: fix p2m section mismatchesRandy Dunlap
Fix section mismatch warnings: set_phys_range_identity() is called by __init xen_set_identity(), so also mark set_phys_range_identity() as __init. then: __early_alloc_p2m() is called set_phys_range_identity(), so also mark __early_alloc_p2m() as __init. WARNING: arch/x86/built-in.o(.text+0x7856): Section mismatch in reference from the function __early_alloc_p2m() to the function .init.text:extend_brk() The function __early_alloc_p2m() references the function __init extend_brk(). This is often because __early_alloc_p2m lacks a __init annotation or the annotation of extend_brk is wrong. WARNING: arch/x86/built-in.o(.text+0x7967): Section mismatch in reference from the function set_phys_range_identity() to the function .init.text:extend_brk() The function set_phys_range_identity() references the function __init extend_brk(). This is often because set_phys_range_identity lacks a __init annotation or the annotation of extend_brk is wrong. [v2: Per Stephen Hemming recommonedation made __early_alloc_p2m static] Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-03-29FRV: Use generic show_interrupts()Thomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-29FRV: Convert genirq namespaceThomas Gleixner
Convert to new function names. Converted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-29frv: Select GENERIC_HARDIRQS_NO_DEPRECATEDThomas Gleixner
All chips converted Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-29frv: Convert cpu irq_chip to new functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-29frv: Convert mb93493 irq_chip to new functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-29frv: Convert mb93093 irq_chip to new functionThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Howells <dhowells@redhat.com>
2011-03-29frv: Convert mb93091 irq_chip to new functionsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Howells <dhowells@redhat.com>
generated by cgit (git 2.34.1) at 2025-05-31 11:21:11 +0000