summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-11-21net-ipv6: IPV6_TRANSPARENT - check NET_RAW prior to NET_ADMINMaciej Żenczykowski
NET_RAW is less dangerous, so more likely to be available to a process, so check it first to prevent some spurious logging. This matches IP_TRANSPARENT which checks NET_RAW first. Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21sfc: Only cancel the PPS workqueue if it existsMartin Habets
The workqueue only exists for the primary PF. For other functions we hit a WARN_ON in kernel/workqueue.c. Fixes: 7c236c43b838 ("sfc: Add support for IEEE-1588 PTP") Signed-off-by: Martin Habets <mhabets@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-21nfc: port100: handle command failure cleanlyOliver Neukum
If starting the transfer of a command suceeds but the transfer for the reply fails, it is not enough to initiate killing the transfer for the command may still be running. You need to wait for the killing to finish before you can reuse URB and buffer. Reported-and-tested-by: syzbot+711468aa5c3a1eabf863@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20net-sysfs: fix netdev_queue_add_kobject() breakageEric Dumazet
kobject_put() should only be called in error path. Fixes: b8eb718348b8 ("net-sysfs: Fix reference count leak in rx|netdev_queue_add_kobject") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jouni Hogander <jouni.hogander@unikie.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20Merge tag 'mlx5-fixes-2019-11-20' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-11-20 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. For -stable v4.9: ('net/mlx5e: Fix set vf link state error flow') For -stable v4.14 ('net/mlxfw: Verify FSM error code translation doesn't exceed array size') For -stable v4.19 ('net/mlx5: Fix auto group size calculation') For -stable v5.3 ('net/mlx5e: Fix error flow cleanup in mlx5e_tc_tun_create_header_ipv4/6') ('net/mlx5e: Do not use non-EXT link modes in EXT mode') ('net/mlx5: Update the list of the PCI supported devices') ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20r8152: Re-order napi_disable in rtl8152_closePrashant Malani
Both rtl_work_func_t() and rtl8152_close() call napi_disable(). Since the two calls aren't protected by a lock, if the close function starts executing before the work function, we can get into a situation where the napi_disable() function is called twice in succession (first by rtl8152_close(), then by set_carrier()). In such a situation, the second call would loop indefinitely, since rtl8152_close() doesn't call napi_enable() to clear the NAPI_STATE_SCHED bit. The rtl8152_close() function in turn issues a cancel_delayed_work_sync(), and so it would wait indefinitely for the rtl_work_func_t() to complete. Since rtl8152_close() is called by a process holding rtnl_lock() which is requested by other processes, this eventually leads to a system deadlock and crash. Re-order the napi_disable() call to occur after the work function disabling and urb cancellation calls are issued. Change-Id: I6ef0b703fc214998a037a68f722f784e1d07815e Reported-by: http://crbug.com/1017928 Signed-off-by: Prashant Malani <pmalani@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20Merge branch 'qca_spi-fixes'David S. Miller
Stefan Wahren says: ==================== net: qca_spi: Fix receive and reset issues This small patch series fixes two major issues in the SPI driver for the QCA700x. It has been tested on a Charge Control C 300 (NXP i.MX6ULL + 2x QCA7000). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20net: qca_spi: Move reset_count to struct qcaspiStefan Wahren
The reset counter is specific for every QCA700x chip. So move this into the private driver struct. Otherwise we get unpredictable reset behavior in setups with multiple QCA700x chips. Fixes: 291ab06ecf67 (net: qualcomm: new Ethernet over SPI driver for QCA7000) Signed-off-by: Stefan Wahren <stefan.wahren@in-tech.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20net: qca_spi: fix receive buffer size checkMichael Heimpold
When receiving many or larger packets, e.g. when doing a file download, it was observed that the read buffer size register reports up to 4 bytes more than the current define allows in the check. If this is the case, then no data transfer is initiated to receive the packets (and thus to empty the buffer) which results in a stall of the interface. These 4 bytes are a hardware generated frame length which is prepended to the actual frame, thus we have to respect it during our check. Fixes: 026b907d58c4 ("net: qca_spi: Add available buffer space verification") Signed-off-by: Michael Heimpold <michael.heimpold@in-tech.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20Merge branch 'ibmvnic-regression'David S. Miller
Juliet Kim says: ==================== Support both XIVE and XICS modes in ibmvnic This series aims to support both XICS and XIVE with avoiding a regression in behavior when a system runs in XICS mode. Patch 1 reverts commit 11d49ce9f7946dfed4dcf5dbde865c78058b50ab (“net/ibmvnic: Fix EOI when running in XIVE mode.”) Patch 2 Ignore H_FUNCTION return from H_EOI to tolerate XIVE mode ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20net/ibmvnic: Ignore H_FUNCTION return from H_EOI to tolerate XIVE modeJuliet Kim
Reversion of commit 11d49ce9f7946dfed4dcf5dbde865c78058b50ab (“net/ibmvnic: Fix EOI when running in XIVE mode.”) leaves us calling H_EOI even in XIVE mode. That will fail with H_FUNCTION because H_EOI is not supported in that mode. That failure is harmless. Ignore it so we can use common code for both XICS and XIVE. Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20Revert "net/ibmvnic: Fix EOI when running in XIVE mode"Juliet Kim
This reverts commit 11d49ce9f7946dfed4dcf5dbde865c78058b50ab (“net/ibmvnic: Fix EOI when running in XIVE mode.”) since that has the unintended effect of changing the interrupt priority and emits warning when running in legacy XICS mode. Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20net/mlxfw: Verify FSM error code translation doesn't exceed array sizeEran Ben Elisha
Array mlxfw_fsm_state_err_str contains value to string translation, when values are provided by mlxfw_dev. If value is larger than MLXFW_FSM_STATE_ERR_MAX, return "unknown error" as expected instead of reading an address than exceed array size. Fixes: 410ed13cae39 ("Add the mlxfw module for Mellanox firmware flash process") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-20net/mlx5: Update the list of the PCI supported devicesShani Shapp
Add the upcoming ConnectX-6 LX device ID. Fixes: 85327a9c4150 ("net/mlx5: Update the list of the PCI supported devices") Signed-off-by: Shani Shapp <shanish@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-20net/mlx5: Fix auto group size calculationMaor Gottlieb
Once all the large flow groups (defined by the user when the flow table is created - max_num_groups) were created, then all the following new flow groups will have only one flow table entry, even though the flow table has place to larger groups. Fix the condition to prefer large flow group. Fixes: f0d22d187473 ("net/mlx5_core: Introduce flow steering autogrouped flow table") Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-20net/mlx5e: Add missing capability bit check for IP-in-IPMarina Varshaver
Device that doesn't support IP-in-IP offloads has to filter csum and gso offload support, otherwise kernel will conclude that device is capable of offloading csum and gso for IP-in-IP tunnels and that might result in IP-in-IP tunnel not functioning. Fixes: 25948b87dda2 ("net/mlx5e: Support TSO and TX checksum offloads for IP-in-IP") Signed-off-by: Marina Varshaver <marinav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-20net/mlx5e: Do not use non-EXT link modes in EXT modeEran Ben Elisha
On some old Firmwares, connector type value was not supported, and value read from FW was 0. For those, driver used link mode in order to set connector type in link_ksetting. After FW exposed the connector type, driver translated the value to ethtool definitions. However, as 0 is a valid value, before returning PORT_OTHER, driver run the check of link mode in order to maintain backward compatibility. Cited patch added support to EXT mode. With both features (connector type and EXT link modes) ,if connector_type read from FW is 0 and EXT mode is set, driver mistakenly compare EXT link modes to non-EXT link mode. Fixed that by skipping this comparison if we are in EXT mode, as connector type value is valid in this scenario. Fixes: 6a897372417e ("net/mlx5: ethtool, Add ethtool support for 50Gbps per lane link modes") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-20net/mlx5e: Fix set vf link state error flowRoi Dayan
Before this commit the ndo always returned success. Fix that. Fixes: 1ab2068a4c66 ("net/mlx5: Implement vports admin state backup/restore") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-20net/mlx5: DR, Limit STE hash table enlarge based on bytemaskAlex Vesker
When an ste hash table has too many collision we enlarge it to a bigger hash table (rehash). Rehashing collision improvement depends on the bytemask value. The more 1 bits we have in bytemask means better spreading in the table. Without this fix tables can grow in size without providing any improvement which can lead to memory depletion and failures. This patch will limit table rehash to reduce memory and improve the performance. Fixes: 41d07074154c ("net/mlx5: DR, Expose steering rule functionality") Signed-off-by: Alex Vesker <valex@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-20net/mlx5: DR, Skip rehash for tables with byte mask zeroAlex Vesker
The byte mask fields affect on the hash index distribution, when the byte mask is zero, the hash calculation will always be equal to the same index. To avoid unneeded rehash of hash tables mark the table to skip rehash. This is needed by the next patch which will limit table rehash to reduce memory consumption. Fixes: 41d07074154c ("net/mlx5: DR, Expose steering rule functionality") Signed-off-by: Alex Vesker <valex@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-20net/mlx5: DR, Fix invalid EQ vector number on CQ creationAlex Vesker
When creating a CQ, the CPU id is used for the vector value. This would fail in-case the CPU id was higher than the maximum vector value. Fixes: 297cccebdc5a ("net/mlx5: DR, Expose an internal API to issue RDMA operations") Signed-off-by: Alex Vesker <valex@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-20net/mlx5e: Reorder mirrer action parsing to check for encap firstVlad Buslov
Mirred action parsing code in parse_tc_fdb_actions() first checks if out_dev has same parent id, and only verifies that there is a pending encap action that was parsed before. Recent change in vxlan module made function netdev_port_same_parent_id() to return true when called for mlx5 eswitch representor and vxlan device created explicitly on mlx5 representor device (vxlan devices created with "external" flag without explicitly specifying parent interface are not affected). With call to netdev_port_same_parent_id() returning true, incorrect code path is chosen and encap rules fail to offload because vxlan dev is not a valid eswitch forwarding dev. Dmesg log of error: [ 1784.389797] devices ens1f0_0 vxlan1 not on same switch HW, can't offload forwarding In order to fix the issue, rearrange conditional in parse_tc_fdb_actions() to check for pending encap action before checking if out_dev has the same parent id. Fixes: 0ce1822c2a08 ("vxlan: add adjacent link to limit depth level") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-20net/mlx5e: Fix ingress rate configuration for representorsEli Cohen
Current code uses the old method of prio encoding in flow_cls_common_offload. Fix to follow the changes introduced in commit ef01adae0e43 ("net: sched: use major priority number as hardware priority"). Fixes: fcb64c0f5640 ("net/mlx5: E-Switch, add ingress rate support") Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-20net/mlx5e: Fix error flow cleanup in mlx5e_tc_tun_create_header_ipv4/6Eli Cohen
Be sure to release the neighbour in case of failures after successful route lookup. Fixes: 101f4de9dd52 ("net/mlx5e: Move TC tunnel offloading code to separate source file") Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-11-20Merge branch 's390-fixes'David S. Miller
Julian Wiedmann says: ==================== s390/qeth: fixes 2019-11-20 please apply two late qeth fixes to your net tree. The first fixes a deadlock that can occur if a qeth device is set offline while in the middle of processing deferred HW events. The second patch converts the return value of an error path to use -EIO, so that it can be passed back to userspace. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20s390/qeth: return proper errno on IO errorJulian Wiedmann
When propagating IO errors back to userspace, one error path in qeth_irq() currently returns '1' instead of a proper errno. Fixes: 54daaca7024d ("s390/qeth: cancel cmd on early error") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20s390/qeth: fix potential deadlock on workqueue flushJulian Wiedmann
The L2 bridgeport code uses the coarse 'conf_mutex' for guarding access to its configuration state. This can result in a deadlock when qeth_l2_stop_card() - called under the conf_mutex - blocks on flush_workqueue() to wait for the completion of pending bridgeport workers. Such workers would also need to aquire the conf_mutex, stalling indefinitely. Introduce a lock that specifically guards the bridgeport configuration, so that the workers no longer need the conf_mutex. Wrapping qeth_l2_promisc_to_bridge() in this fine-grained lock then also fixes a theoretical race against a concurrent qeth_bridge_port_role_store() operation. Fixes: c0a2e4d10d93 ("s390/qeth: conclude all event processing before offlining a card") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20ipv6/route: return if there is no fib_nh_gw_familyHangbin Liu
Previously we will return directly if (!rt || !rt->fib6_nh.fib_nh_gw_family) in function rt6_probe(), but after commit cc3a86c802f0 ("ipv6: Change rt6_probe to take a fib6_nh"), the logic changed to return if there is fib_nh_gw_family. Fixes: cc3a86c802f0 ("ipv6: Change rt6_probe to take a fib6_nh") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20net-sysfs: Fix reference count leak in rx|netdev_queue_add_kobjectJouni Hogander
kobject_init_and_add takes reference even when it fails. This has to be given up by the caller in error handling. Otherwise memory allocated by kobject_init_and_add is never freed. Originally found by Syzkaller: BUG: memory leak unreferenced object 0xffff8880679f8b08 (size 8): comm "netdev_register", pid 269, jiffies 4294693094 (age 12.132s) hex dump (first 8 bytes): 72 78 2d 30 00 36 20 d4 rx-0.6 . backtrace: [<000000008c93818e>] __kmalloc_track_caller+0x16e/0x290 [<000000001f2e4e49>] kvasprintf+0xb1/0x140 [<000000007f313394>] kvasprintf_const+0x56/0x160 [<00000000aeca11c8>] kobject_set_name_vargs+0x5b/0x140 [<0000000073a0367c>] kobject_init_and_add+0xd8/0x170 [<0000000088838e4b>] net_rx_queue_update_kobjects+0x152/0x560 [<000000006be5f104>] netdev_register_kobject+0x210/0x380 [<00000000e31dab9d>] register_netdevice+0xa1b/0xf00 [<00000000f68b2465>] __tun_chr_ioctl+0x20d5/0x3dd0 [<000000004c50599f>] tun_chr_ioctl+0x2f/0x40 [<00000000bbd4c317>] do_vfs_ioctl+0x1c7/0x1510 [<00000000d4c59e8f>] ksys_ioctl+0x99/0xb0 [<00000000946aea81>] __x64_sys_ioctl+0x78/0xb0 [<0000000038d946e5>] do_syscall_64+0x16f/0x580 [<00000000e0aa5d8f>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [<00000000285b3d1a>] 0xffffffffffffffff Cc: David Miller <davem@davemloft.net> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Jouni Hogander <jouni.hogander@unikie.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-19mdio_bus: Fix init if CONFIG_RESET_CONTROLLER=nGeert Uytterhoeven
Commit 1d4639567d97 ("mdio_bus: Fix PTR_ERR applied after initialization to constant") accidentally changed a check from -ENOTSUPP to -ENOSYS, causing failures if reset controller support is not enabled. E.g. on r7s72100/rskrza1: sh-eth e8203000.ethernet: MDIO init failed: -524 sh-eth: probe of e8203000.ethernet failed with error -524 Seen on r8a7740/armadillo, r7s72100/rskrza1, and r7s9210/rza2mevb. Fixes: 1d4639567d97 ("mdio_bus: Fix PTR_ERR applied after initialization to constant") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: YueHaibing <yuehaibing@huawei.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-19Revert "mdio_bus: fix mdio_register_device when RESET_CONTROLLER is disabled"David S. Miller
This reverts commit 075e238d12c21c8bde700d21fb48be7a3aa80194. Going to go with Geert's fix instead, which also has a correct Fixes tag. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-19net: hns3: fix a wrong reset interrupt status maskHuazhong Tan
According to hardware user manual, bits5~7 in register HCLGE_MISC_VECTOR_INT_STS means reset interrupts status, but HCLGE_RESET_INT_M is defined as bits0~2 now. So it will make hclge_reset_err_handle() read the wrong reset interrupt status. This patch fixes this wrong bit mask. Fixes: 2336f19d7892 ("net: hns3: check reset interrupt status when reset fails") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-19net: fec: fix clock count mis-matchChuhong Yuan
pm_runtime_put_autosuspend in probe will call runtime suspend to disable clks automatically if CONFIG_PM is defined. (If CONFIG_PM is not defined, its implementation will be empty, then runtime suspend will not be called.) Therefore, we can call pm_runtime_get_sync to runtime resume it first to enable clks, which matches the runtime suspend. (Only when CONFIG_PM is defined, otherwise pm_runtime_get_sync will also be empty, then runtime resume will not be called.) Then it is fine to disable clks without causing clock count mis-match. Fixes: c43eab3eddb4 ("net: fec: add missed clk_disable_unprepare in remove") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-19net/sched: act_pedit: fix WARN() in the traffic pathDavide Caratti
when configuring act_pedit rules, the number of keys is validated only on addition of a new entry. This is not sufficient to avoid hitting a WARN() in the traffic path: for example, it is possible to replace a valid entry with a new one having 0 extended keys, thus causing splats in dmesg like: pedit BUG: index 42 WARNING: CPU: 2 PID: 4054 at net/sched/act_pedit.c:410 tcf_pedit_act+0xc84/0x1200 [act_pedit] [...] RIP: 0010:tcf_pedit_act+0xc84/0x1200 [act_pedit] Code: 89 fa 48 c1 ea 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e ac 00 00 00 48 8b 44 24 10 48 c7 c7 a0 c4 e4 c0 8b 70 18 e8 1c 30 95 ea <0f> 0b e9 a0 fa ff ff e8 00 03 f5 ea e9 14 f4 ff ff 48 89 58 40 e9 RSP: 0018:ffff888077c9f320 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffac2983a2 RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff888053927bec RBP: dffffc0000000000 R08: ffffed100a726209 R09: ffffed100a726209 R10: 0000000000000001 R11: ffffed100a726208 R12: ffff88804beea780 R13: ffff888079a77400 R14: ffff88804beea780 R15: ffff888027ab2000 FS: 00007fdeec9bd740(0000) GS:ffff888053900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffdb3dfd000 CR3: 000000004adb4006 CR4: 00000000001606e0 Call Trace: tcf_action_exec+0x105/0x3f0 tcf_classify+0xf2/0x410 __dev_queue_xmit+0xcbf/0x2ae0 ip_finish_output2+0x711/0x1fb0 ip_output+0x1bf/0x4b0 ip_send_skb+0x37/0xa0 raw_sendmsg+0x180c/0x2430 sock_sendmsg+0xdb/0x110 __sys_sendto+0x257/0x2b0 __x64_sys_sendto+0xdd/0x1b0 do_syscall_64+0xa5/0x4e0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fdeeb72e993 Code: 48 8b 0d e0 74 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 0d d6 2c 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 4b cc 00 00 48 89 04 24 RSP: 002b:00007ffdb3de8a18 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055c81972b700 RCX: 00007fdeeb72e993 RDX: 0000000000000040 RSI: 000055c81972b700 RDI: 0000000000000003 RBP: 00007ffdb3dea130 R08: 000055c819728510 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 R13: 000055c81972b6c0 R14: 000055c81972969c R15: 0000000000000080 Fix this moving the check on 'nkeys' earlier in tcf_pedit_init(), so that attempts to install rules having 0 keys are always rejected with -EINVAL. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-19net: phylink: fix link mode modification in PHY modeRussell King
Modifying the link settings via phylink_ethtool_ksettings_set() and phylink_ethtool_set_pauseparam() didn't always work as intended for PHY based setups, as calling phylink_mac_config() would result in the unresolved configuration being committed to the MAC, rather than the configuration with the speed and duplex setting. This would work fine if the update caused the link to renegotiate, but if no settings have changed, phylib won't trigger a renegotiation cycle, and the MAC will be left incorrectly configured. Avoid calling phylink_mac_config() unless we are using an inband mode in phylink_ethtool_ksettings_set(), and use phy_set_asym_pause() as introduced in 4.20 to set the PHY settings in phylink_ethtool_set_pauseparam(). Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-19net: phylink: update documentation on create and destroyRussell King
Update the documentation on phylink's create and destroy functions to explicitly state that the rtnl lock must not be held while calling these. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-19r8169: disable TSO on a single version of RTL8168c to fix performanceCorinna Vinschen
During performance testing, I found that one of my r8169 NICs suffered a major performance loss, a 8168c model. Running netperf's TCP_STREAM test didn't return the expected throughput of > 900 Mb/s, but rather only about 22 Mb/s. Strange enough, running the TCP_MAERTS and UDP_STREAM tests all returned with throughput > 900 Mb/s, as did TCP_STREAM with the other r8169 NICs I can test (either one of 8169s, 8168e, 8168f). Bisecting turned up commit 93681cd7d94f83903cb3f0f95433d10c28a7e9a5, "r8169: enable HW csum and TSO" as the culprit. I added my 8168c version, RTL_GIGA_MAC_VER_22, to the code special-casing the 8168evl as per the patch below. This fixed the performance problem for me. Fixes: 93681cd7d94f ("r8169: enable HW csum and TSO") Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-19MAINTAINERS: forcedeth: Change Zhu Yanjun's email addressZhu Yanjun
I prefer to use my personal email address for kernel related work. Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Acked-by: Rain River <rain.1986.08.12@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-19taprio: don't reject same mqprio settingsIvan Khoronzhuk
The taprio qdisc allows to set mqprio setting but only once. In case if mqprio settings are provided next time the error is returned as it's not allowed to change traffic class mapping in-flignt and that is normal. But if configuration is absolutely the same - no need to return error. It allows to provide same command couple times, changing only base time for instance, or changing only scheds maps, but leaving mqprio setting w/o modification. It more corresponds the message: "Changing the traffic mapping of a running schedule is not supported", so reject mqprio if it's really changed. Also corrected TC_BITMASK + 1 for consistency, as proposed. Fixes: a3d43c0d56f1 ("taprio: Add support adding an admin schedule") Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-19net/tls: enable sk_msg redirect to tls socket egressWillem de Bruijn
Bring back tls_sw_sendpage_locked. sk_msg redirection into a socket with TLS_TX takes the following path: tcp_bpf_sendmsg_redir tcp_bpf_push_locked tcp_bpf_push kernel_sendpage_locked sock->ops->sendpage_locked Also update the flags test in tls_sw_sendpage_locked to allow flag MSG_NO_SHARED_FRAGS. bpf_tcp_sendmsg sets this. Link: https://lore.kernel.org/netdev/CA+FuTSdaAawmZ2N8nfDDKu3XLpXBbMtcCT0q4FntDD2gn8ASUw@mail.gmail.com/T/#t Link: https://github.com/wdebruij/kerneltools/commits/icept.2 Fixes: 0608c69c9a80 ("bpf: sk_msg, sock{map|hash} redirect through ULP") Fixes: f3de19af0f5b ("Revert \"net/tls: remove unused function tls_sw_sendpage_locked\"") Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-19gve: fix dma sync bug where not all pages syncedAdi Suresh
The previous commit had a bug where the last page in the memory range could not be synced. This change fixes the behavior so that all the required pages are synced. Fixes: 9cfeeb576d49 ("gve: Fixes DMA synchronization") Signed-off-by: Adi Suresh <adisuresh@google.com> Reviewed-by: Catherine Sullivan <csully@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-18mdio_bus: fix mdio_register_device when RESET_CONTROLLER is disabledMarek Behún
When CONFIG_RESET_CONTROLLER is disabled, the devm_reset_control_get_exclusive function returns -ENOTSUPP. This is not handled in subsequent check and then the mdio device fails to probe. When CONFIG_RESET_CONTROLLER is enabled, its code checks in OF for reset device, and since it is not present, returns -ENOENT. -ENOENT is handled. Add -ENOTSUPP also. This happened to me when upgrading kernel on Turris Omnia. You either have to enable CONFIG_RESET_CONTROLLER or use this patch. Signed-off-by: Marek Behún <marek.behun@nic.cz> Fixes: 71dd6c0dff51b ("net: phy: add support for reset-controller") Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-18net/ipv4: fix sysctl max for fib_multipath_hash_policyMarcelo Ricardo Leitner
Commit eec4844fae7c ("proc/sysctl: add shared variables for range check") did: - .extra2 = &two, + .extra2 = SYSCTL_ONE, here, which doesn't seem to be intentional, given the changelog. This patch restores it to the previous, as the value of 2 still makes sense (used in fib_multipath_hash()). Fixes: eec4844fae7c ("proc/sysctl: add shared variables for range check") Cc: Matteo Croce <mcroce@redhat.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-18phy: mdio-sun4i: add missed regulator_disable in removeChuhong Yuan
The driver forgets to disable the regulator in remove like what is done in probe failure. Add the missed call to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-18net/mlx4_en: Fix wrong limitation for number of TX ringsTariq Toukan
XDP_TX rings should not be limited by max_num_tx_rings_p_up. To make sure total number of TX rings never exceed MAX_TX_RINGS, add similar check in mlx4_en_alloc_tx_queue_per_tc(), where a new value is assigned for num_up. Fixes: 7e1dc5e926d5 ("net/mlx4_en: Limit the number of TX rings") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-18net: sched: ensure opts_len <= IP_TUNNEL_OPTS_MAX in act_tunnel_keyXin Long
info->options_len is 'u8' type, and when opts_len with a value > IP_TUNNEL_OPTS_MAX, 'info->options_len = opts_len' will cast int to u8 and set a wrong value to info->options_len. Kernel crashed in my test when doing: # opts="0102:80:00800022" # for i in {1..99}; do opts="$opts,0102:80:00800022"; done # ip link add name geneve0 type geneve dstport 0 external # tc qdisc add dev eth0 ingress # tc filter add dev eth0 protocol ip parent ffff: \ flower indev eth0 ip_proto udp action tunnel_key \ set src_ip 10.0.99.192 dst_ip 10.0.99.193 \ dst_port 6081 id 11 geneve_opts $opts \ action mirred egress redirect dev geneve0 So we should do the similar check as cls_flower does, return error when opts_len > IP_TUNNEL_OPTS_MAX in tunnel_key_copy_opts(). Fixes: 0ed5269f9e41 ("net/sched: add tunnel option support to act_tunnel_key") Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-18mlxsw: spectrum_router: Fix determining underlay for a GRE tunnelPetr Machata
The helper mlxsw_sp_ipip_dev_ul_tb_id() determines the underlay VRF of a GRE tunnel. For a tunnel without a bound device, it uses the same VRF that the tunnel is in. However in Linux, a GRE tunnel without a bound device uses the main VRF as the underlay. Fix the function accordingly. mlxsw further assumed that moving a tunnel to a different VRF could cause conflict in local tunnel endpoint address, which cannot be offloaded. However, the only way that an underlay could be changed by moving the tunnel device itself is if the tunnel device does not have a bound device. But in that case the underlay is always the main VRF, so there is no opportunity to introduce a conflict by moving such device. Thus this check constitutes a dead code, and can be removed, which do. Fixes: 6ddb7426a7d4 ("mlxsw: spectrum_router: Introduce loopback RIFs") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-18net: atm: Reduce the severity of logging in unlink_clip_vccAditya Pakki
In case of errors in unlink_clip_vcc, the logging level is set to pr_crit but failures in clip_setentry are handled by pr_err(). The patch changes the severity consistent across invocations. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-17net/mlx4_en: fix mlx4 ethtool -N insertionLuigi Rizzo
ethtool expects ETHTOOL_GRXCLSRLALL to set ethtool_rxnfc->data with the total number of entries in the rx classifier table. Surprisingly, mlx4 is missing this part (in principle ethtool could still move forward and try the insert). Tested: compiled and run command: phh13:~# ethtool -N eth1 flow-type udp4 queue 4 Added rule with ID 255 Signed-off-by: Luigi Rizzo <lrizzo@google.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
2019-11-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2019-11-15 The following pull-request contains BPF updates for your *net* tree. We've added 1 non-merge commits during the last 9 day(s) which contain a total of 1 file changed, 3 insertions(+), 1 deletion(-). The main changes are: 1) Fix a missing unlock of bpf_devs_lock in bpf_offload_dev_create()'s error path, from Dan. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-06-20 23:28:27 +0000