summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-12-06tcp: md5: fix potential overestimation of TCP option spaceEric Dumazet
Back in 2008, Adam Langley fixed the corner case of packets for flows having all of the following options : MD5 TS SACK Since MD5 needs 20 bytes, and TS needs 12 bytes, no sack block can be cooked from the remaining 8 bytes. tcp_established_options() correctly sets opts->num_sack_blocks to zero, but returns 36 instead of 32. This means TCP cooks packets with 4 extra bytes at the end of options, containing unitialized bytes. Fixes: 33ad798c924b ("tcp: options clean up") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06Merge branch 'net-tc-indirect-block-relay'David S. Miller
John Hurley says: ==================== Ensure egress un/bind are relayed with indirect blocks On register and unregister for indirect blocks, a command is called that sends a bind/unbind event to the registering driver. This command assumes that the bind to indirect block will be on ingress. However, drivers such as NFP have allowed binding to clsact qdiscs as well as ingress qdiscs from mainline Linux 5.2. A clsact qdisc binds to an ingress and an egress block. Rather than assuming that an indirect bind is always ingress, modify the function names to remove the ingress tag (patch 1). In cls_api, which is used by NFP to offload TC flower, generate bind/unbind message for both ingress and egress blocks on the event of indirectly registering/unregistering from that block. Doing so mimics the behaviour of both ingress and clsact qdiscs on initialise and destroy. This now ensures that drivers such as NFP receive the correct binder type for the indirect block registration. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06net: sched: allow indirect blocks to bind to clsact in TCJohn Hurley
When a device is bound to a clsact qdisc, bind events are triggered to registered drivers for both ingress and egress. However, if a driver registers to such a device using the indirect block routines then it is assumed that it is only interested in ingress offload and so only replays ingress bind/unbind messages. The NFP driver supports the offload of some egress filters when registering to a block with qdisc of type clsact. However, on unregister, if the block is still active, it will not receive an unbind egress notification which can prevent proper cleanup of other registered callbacks. Modify the indirect block callback command in TC to send messages of ingress and/or egress bind depending on the qdisc in use. NFP currently supports egress offload for TC flower offload so the changes are only added to TC. Fixes: 4d12ba42787b ("nfp: flower: allow offloading of matches on 'internal' ports") Signed-off-by: John Hurley <john.hurley@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06net: core: rename indirect block ingress cb functionJohn Hurley
With indirect blocks, a driver can register for callbacks from a device that is does not 'own', for example, a tunnel device. When registering to or unregistering from a new device, a callback is triggered to generate a bind/unbind event. This, in turn, allows the driver to receive any existing rules or to properly clean up installed rules. When first added, it was assumed that all indirect block registrations would be for ingress offloads. However, the NFP driver can, in some instances, support clsact qdisc binds for egress offload. Change the name of the indirect block callback command in flow_offload to remove the 'ingress' identifier from it. While this does not change functionality, a follow up patch will implement a more more generic callback than just those currently just supporting ingress offload. Fixes: 4d12ba42787b ("nfp: flower: allow offloading of matches on 'internal' ports") Signed-off-by: John Hurley <john.hurley@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06net-sysfs: Call dev_hold always in netdev_queue_add_kobjectJouni Hogander
Dev_hold has to be called always in netdev_queue_add_kobject. Otherwise usage count drops below 0 in case of failure in kobject_init_and_add. Fixes: b8eb718348b8 ("net-sysfs: Fix reference count leak in rx|netdev_queue_add_kobject") Reported-by: Hulk Robot <hulkci@huawei.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: David Miller <davem@davemloft.net> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06net: dsa: fix flow dissection on Tx pathAlexander Lobakin
Commit 43e665287f93 ("net-next: dsa: fix flow dissection") added an ability to override protocol and network offset during flow dissection for DSA-enabled devices (i.e. controllers shipped as switch CPU ports) in order to fix skb hashing for RPS on Rx path. However, skb_hash() and added part of code can be invoked not only on Rx, but also on Tx path if we have a multi-queued device and: - kernel is running on UP system or - XPS is not configured. The call stack in this two cases will be like: dev_queue_xmit() -> __dev_queue_xmit() -> netdev_core_pick_tx() -> netdev_pick_tx() -> skb_tx_hash() -> skb_get_hash(). The problem is that skbs queued for Tx have both network offset and correct protocol already set up even after inserting a CPU tag by DSA tagger, so calling tag_ops->flow_dissect() on this path actually only breaks flow dissection and hashing. This can be observed by adding debug prints just before and right after tag_ops->flow_dissect() call to the related block of code: Before the patch: Rx path (RPS): [ 19.240001] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 19.244271] tag_ops->flow_dissect() [ 19.247811] Rx: proto: 0x0800, nhoff: 8 /* ETH_P_IP */ [ 19.215435] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 19.219746] tag_ops->flow_dissect() [ 19.223241] Rx: proto: 0x0806, nhoff: 8 /* ETH_P_ARP */ [ 18.654057] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 18.658332] tag_ops->flow_dissect() [ 18.661826] Rx: proto: 0x8100, nhoff: 8 /* ETH_P_8021Q */ Tx path (UP system): [ 18.759560] Tx: proto: 0x0800, nhoff: 26 /* ETH_P_IP */ [ 18.763933] tag_ops->flow_dissect() [ 18.767485] Tx: proto: 0x920b, nhoff: 34 /* junk */ [ 22.800020] Tx: proto: 0x0806, nhoff: 26 /* ETH_P_ARP */ [ 22.804392] tag_ops->flow_dissect() [ 22.807921] Tx: proto: 0x920b, nhoff: 34 /* junk */ [ 16.898342] Tx: proto: 0x86dd, nhoff: 26 /* ETH_P_IPV6 */ [ 16.902705] tag_ops->flow_dissect() [ 16.906227] Tx: proto: 0x920b, nhoff: 34 /* junk */ After: Rx path (RPS): [ 16.520993] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 16.525260] tag_ops->flow_dissect() [ 16.528808] Rx: proto: 0x0800, nhoff: 8 /* ETH_P_IP */ [ 15.484807] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 15.490417] tag_ops->flow_dissect() [ 15.495223] Rx: proto: 0x0806, nhoff: 8 /* ETH_P_ARP */ [ 17.134621] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 17.138895] tag_ops->flow_dissect() [ 17.142388] Rx: proto: 0x8100, nhoff: 8 /* ETH_P_8021Q */ Tx path (UP system): [ 15.499558] Tx: proto: 0x0800, nhoff: 26 /* ETH_P_IP */ [ 20.664689] Tx: proto: 0x0806, nhoff: 26 /* ETH_P_ARP */ [ 18.565782] Tx: proto: 0x86dd, nhoff: 26 /* ETH_P_IPV6 */ In order to fix that we can add the check 'proto == htons(ETH_P_XDSA)' to prevent code from calling tag_ops->flow_dissect() on Tx. I also decided to initialize 'offset' variable so tagger callbacks can now safely leave it untouched without provoking a chaos. Fixes: 43e665287f93 ("net-next: dsa: fix flow dissection") Signed-off-by: Alexander Lobakin <alobakin@dlink.ru> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06net/tls: Fix return values to avoid ENOTSUPPValentin Vidic
ENOTSUPP is not available in userspace, for example: setsockopt failed, 524, Unknown error 524 Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: - fix CPU topology setup for SCHED_MC case - fix VDSO regression * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8947/1: Fix __arch_get_hw_counter() access to CNTVCT ARM: 8943/1: Fix topology setup in case of CPU hotplug for CONFIG_SCHED_MC
2019-12-06Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "A set of fixes that we've merged late, but for the most part that have been sitting in -next for a while through platform maintainer trees: - Fixes to suspend/resume on Tegra, caused by the added features this merge window - Cleanups and minor fixes to TI additions this merge window - Tee fixes queued up late before the merge window, included here. - A handful of other fixlets There's also a refresh of the shareed config files (multi_v* on 32-bit, and defconfig on 64-bit), to avoid conflicts when we get new contributions" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits) ARM: multi_v7_defconfig: Restore debugfs support ARM: defconfig: re-run savedefconfig on multi_v* configs arm64: defconfig: re-run savedefconfig ARM: pxa: Fix resource properties soc: mediatek: cmdq: fixup wrong input order of write api soc: aspeed: Fix snoop_file_poll()'s return type MAINTAINERS: Switch to Marvell addresses MAINTAINERS: update Cavium ThunderX drivers Revert "arm64: dts: juno: add dma-ranges property" MAINTAINERS: Make Nicolas Saenz Julienne the new bcm2835 maintainer firmware: arm_scmi: Avoid double free in error flow arm64: dts: juno: Fix UART frequency ARM: dts: Fix sgx sysconfig register for omap4 arm: socfpga: execute cold reboot by default ARM: dts: Fix vcsi regulator to be always-on for droid4 to prevent hangs ARM: dts: dra7: fix cpsw mdio fck clock ARM: dts: am57xx-beagle-x15: Update pinmux name to ddr_3_3v ARM: dts: omap3-tao3530: Fix incorrect MMC card detection GPIO polarity soc/tegra: pmc: Add reset sources and levels on Tegra194 soc/tegra: pmc: Add missing IRQ callbacks on Tegra194 ...
2019-12-06Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - ZONE_DMA32 initialisation fix when memblocks fall entirely within the first GB (used by ZONE_DMA in 5.5 for Raspberry Pi 4). - Couple of ftrace fixes following the FTRACE_WITH_REGS patchset. - access_ok() fix for the Tagged Address ABI when called from from a kernel thread (asynchronous I/O): the kthread does not have the TIF flags of the mm owner, so untag the user address unconditionally. - KVM compute_layout() called before the alternatives code patching. - Minor clean-ups. * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: entry: refine comment of stack overflow check arm64: ftrace: fix ifdeffery arm64: KVM: Invoke compute_layout() before alternatives are applied arm64: Validate tagged addresses in access_ok() called from kernel threads arm64: mm: Fix column alignment for UXN in kernel_page_tables arm64: insn: consistently handle exit text arm64: mm: Fix initialisation of DMA zones on non-NUMA systems
2019-12-06pipe: Fix iteration end check in fuse_dev_splice_write()David Howells
Fix the iteration end check in fuse_dev_splice_write(). The iterator position can only be compared with == or != since wrappage may be involved. Fixes: 8cefc107ca54 ("pipe: Use head and tail pointers for the ring, not cursor and length") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-06Merge tag 'powerpc-5.5-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc updates from Michael Ellerman: "A few commits splitting the KASAN instrumented bitops header in three, to match the split of the asm-generic bitops headers. This is needed on powerpc because we use the generic bitops for the non-atomic case only, whereas the existing KASAN instrumented bitops assume all the underlying operations are provided by the arch as arch_foo() versions. Thanks to: Daniel Axtens & Christophe Leroy" * tag 'powerpc-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: docs/core-api: Remove possibly confusing sub-headings from Bit Operations powerpc: support KASAN instrumentation of bitops kasan: support instrumented bitops combined with generic bitops
2019-12-06Merge tag 'powerpc-5.5-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One fix for a regression introduced by our recent rework of cache flushing on memory hotunplug. Like several other arches, our VDSO clock_getres() needed a fix to match the semantics of posix_get_hrtimer_res(). A fix for a boot crash on Power9 LPARs using PCI LSI interrupts. A commit disabling use of the trace_imc PMU (not the core PMU) on Power9 systems, because it can lead to checkstops, until a workaround is developed. A handful of other minor fixes. Thanks to: Aneesh Kumar K.V, Anju T Sudhakar, Ard Biesheuvel, Christophe Leroy, Cédric Le Goater, Madhavan Srinivasan, Vincenzo Frascino" * tag 'powerpc-5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/perf: Disable trace_imc pmu powerpc/powernv: Avoid re-registration of imc debugfs directory powerpc/pmem: Convert to EXPORT_SYMBOL_GPL powerpc/archrandom: fix arch_get_random_seed_int() powerpc: Fix vDSO clock_getres() powerpc/pmem: Fix kernel crash due to wrong range value usage in flush_dcache_range powerpc/xive: Skip ioremap() of ESB pages for LSI interrupts powerpc/kasan: Fix boot failure with RELOCATABLE && FSL_BOOKE
2019-12-06Merge tag 'sound-fix-5.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull more sound updates from Takashi Iwai: "A few last-minute updates, most of them are the regression fixes: - AMD HD-audio HDMI runtime PM improvements - Fixes for HD-audio HDMI regressions wrt DP-MST - A regression fix for the previous aloop enhancement - A fix for a long-time problem in PCM OSS layer that was spotted by fuzzer now - A few HD-audio quirks" * tag 'sound-fix-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: pcm: oss: Avoid potential buffer overflows ALSA: hda: hdmi - Keep old slot assignment behavior for Intel platforms ALSA: hda: Modify stream stripe mask only when needed ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen ALSA: hda: hdmi - preserve non-MST PCM routing for Intel platforms ALSA: hda: hdmi - fix kernel oops caused by invalid PCM idx ALSA: hda/realtek - Fix inverted bass GPIO pin on Acer 8951G ALSA: hda/realtek - Dell headphone has noise on unmute for ALC236 ALSA: hda: hdmi - fix regression in connect list handling ALSA: aloop: Avoid pointer dereference before null-check ALSA: hda/hdmi - enable automatic runtime pm for AMD HDMI codecs by default ALSA: hda/hdmi - enable runtime pm for newer AMD display audio ALSA: hda/hdmi - Add new pci ids for AMD GPU display audio ALSA: hda/hdmi - fix vgaswitcheroo detection for AMD
2019-12-06pipe: fix incorrect caching of pipe state over pipe_wait()Linus Torvalds
Similarly to commit 8f868d68d335 ("pipe: Fix missing mask update after pipe_wait()") this fixes a case where the pipe rewrite ended up caching the pipe state incorrectly over a pipe lock drop event. It wasn't quite as obvious, because you needed to splice data from a pipe to a file, which is a fairly unusual operation, but it's completely wrong. Make sure we load the pipe head/tail/size information only after we've waited for there to be data in the pipe. While in that file, also make one of the splice helper functions use the canonical arghument order for pipe_empty(). That's syntactic - pipe emptiness is just that head and tail are equal, and thus mixing up head and tail doesn't really matter. It's still wrong, though. Reported-by: David Sterba <dsterba@suse.cz> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-06smb3: fix mode passed in on create for modetosid mount optionSteve French
When using the special SID to store the mode bits in an ACE (See http://technet.microsoft.com/en-us/library/hh509017(v=ws.10).aspx) which is enabled with mount parm "modefromsid" we were not passing in the mode via SMB3 create (although chmod was enabled). SMB3 create allows a security descriptor context to be passed in (which is more atomic and thus preferable to setting the mode bits after create via a setinfo). This patch enables setting the mode bits on create when using modefromsid mount option. In addition it fixes an endian error in the definition of the Control field flags in the SMB3 security descriptor. It also makes the ACE type of the special SID better match the documentation (and behavior of servers which use this to store mode bits in SMB3 ACLs). Signed-off-by: Steve French <stfrench@microsoft.com> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2019-12-06net: avoid an indirect call in ____sys_recvmsg()Eric Dumazet
CONFIG_RETPOLINE=y made indirect calls expensive. gcc seems to add an indirect call in ____sys_recvmsg(). Rewriting the code slightly makes sure to avoid this indirection. Alternative would be to not call sock_recvmsg() and instead use security_socket_recvmsg() and sock_recvmsg_nosec(), but this is less readable IMO. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: David Laight <David.Laight@aculab.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06phy: mdio-thunder: add missed pci_release_regions in removeChuhong Yuan
The driver forgets to call pci_release_regions() in remove like that in probe failure. Add the missed call to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06tipc: fix ordering of tipc module init and exit routineTaehee Yoo
In order to set/get/dump, the tipc uses the generic netlink infrastructure. So, when tipc module is inserted, init function calls genl_register_family(). After genl_register_family(), set/get/dump commands are immediately allowed and these callbacks internally use the net_generic. net_generic is allocated by register_pernet_device() but this is called after genl_register_family() in the __init function. So, these callbacks would use un-initialized net_generic. Test commands: #SHELL1 while : do modprobe tipc modprobe -rv tipc done #SHELL2 while : do tipc link list done Splat looks like: [ 59.616322][ T2788] kasan: CONFIG_KASAN_INLINE enabled [ 59.617234][ T2788] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 59.618398][ T2788] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 59.619389][ T2788] CPU: 3 PID: 2788 Comm: tipc Not tainted 5.4.0+ #194 [ 59.620231][ T2788] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 59.621428][ T2788] RIP: 0010:tipc_bcast_get_broadcast_mode+0x131/0x310 [tipc] [ 59.622379][ T2788] Code: c7 c6 ef 8b 38 c0 65 ff 0d 84 83 c9 3f e8 d7 a5 f2 e3 48 8d bb 38 11 00 00 48 b8 00 00 00 00 [ 59.622550][ T2780] NET: Registered protocol family 30 [ 59.624627][ T2788] RSP: 0018:ffff88804b09f578 EFLAGS: 00010202 [ 59.624630][ T2788] RAX: dffffc0000000000 RBX: 0000000000000011 RCX: 000000008bc66907 [ 59.624631][ T2788] RDX: 0000000000000229 RSI: 000000004b3cf4cc RDI: 0000000000001149 [ 59.624633][ T2788] RBP: ffff88804b09f588 R08: 0000000000000003 R09: fffffbfff4fb3df1 [ 59.624635][ T2788] R10: fffffbfff50318f8 R11: ffff888066cadc18 R12: ffffffffa6cc2f40 [ 59.624637][ T2788] R13: 1ffff11009613eba R14: ffff8880662e9328 R15: ffff8880662e9328 [ 59.624639][ T2788] FS: 00007f57d8f7b740(0000) GS:ffff88806cc00000(0000) knlGS:0000000000000000 [ 59.624645][ T2788] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 59.625875][ T2780] tipc: Started in single node mode [ 59.626128][ T2788] CR2: 00007f57d887a8c0 CR3: 000000004b140002 CR4: 00000000000606e0 [ 59.633991][ T2788] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 59.635195][ T2788] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 59.636478][ T2788] Call Trace: [ 59.637025][ T2788] tipc_nl_add_bc_link+0x179/0x1470 [tipc] [ 59.638219][ T2788] ? lock_downgrade+0x6e0/0x6e0 [ 59.638923][ T2788] ? __tipc_nl_add_link+0xf90/0xf90 [tipc] [ 59.639533][ T2788] ? tipc_nl_node_dump_link+0x318/0xa50 [tipc] [ 59.640160][ T2788] ? mutex_lock_io_nested+0x1380/0x1380 [ 59.640746][ T2788] tipc_nl_node_dump_link+0x4fd/0xa50 [tipc] [ 59.641356][ T2788] ? tipc_nl_node_reset_link_stats+0x340/0x340 [tipc] [ 59.642088][ T2788] ? __skb_ext_del+0x270/0x270 [ 59.642594][ T2788] genl_lock_dumpit+0x85/0xb0 [ 59.643050][ T2788] netlink_dump+0x49c/0xed0 [ 59.643529][ T2788] ? __netlink_sendskb+0xc0/0xc0 [ 59.644044][ T2788] ? __netlink_dump_start+0x190/0x800 [ 59.644617][ T2788] ? __mutex_unlock_slowpath+0xd0/0x670 [ 59.645177][ T2788] __netlink_dump_start+0x5a0/0x800 [ 59.645692][ T2788] genl_rcv_msg+0xa75/0xe90 [ 59.646144][ T2788] ? __lock_acquire+0xdfe/0x3de0 [ 59.646692][ T2788] ? genl_family_rcv_msg_attrs_parse+0x320/0x320 [ 59.647340][ T2788] ? genl_lock_dumpit+0xb0/0xb0 [ 59.647821][ T2788] ? genl_unlock+0x20/0x20 [ 59.648290][ T2788] ? genl_parallel_done+0xe0/0xe0 [ 59.648787][ T2788] ? find_held_lock+0x39/0x1d0 [ 59.649276][ T2788] ? genl_rcv+0x15/0x40 [ 59.649722][ T2788] ? lock_contended+0xcd0/0xcd0 [ 59.650296][ T2788] netlink_rcv_skb+0x121/0x350 [ 59.650828][ T2788] ? genl_family_rcv_msg_attrs_parse+0x320/0x320 [ 59.651491][ T2788] ? netlink_ack+0x940/0x940 [ 59.651953][ T2788] ? lock_acquire+0x164/0x3b0 [ 59.652449][ T2788] genl_rcv+0x24/0x40 [ 59.652841][ T2788] netlink_unicast+0x421/0x600 [ ... ] Fixes: 7e4369057806 ("tipc: fix a slab object leak") Fixes: a62fbccecd62 ("tipc: make subscriber server support net namespace") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06mqprio: Fix out-of-bounds access in mqprio_dumpVladyslav Tarasiuk
When user runs a command like tc qdisc add dev eth1 root mqprio KASAN stack-out-of-bounds warning is emitted. Currently, NLA_ALIGN macro used in mqprio_dump provides too large buffer size as argument for nla_put and memcpy down the call stack. The flow looks like this: 1. nla_put expects exact object size as an argument; 2. Later it provides this size to memcpy; 3. To calculate correct padding for SKB, nla_put applies NLA_ALIGN macro itself. Therefore, NLA_ALIGN should not be applied to the nla_put parameter. Otherwise it will lead to out-of-bounds memory access in memcpy. Fixes: 4e8b86c06269 ("mqprio: Introduce new hardware offload mode and shaper in mqprio") Signed-off-by: Vladyslav Tarasiuk <vladyslavt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06net: stmmac: reset Tx desc base address before restarting TxJongsung Kim
Refer to the databook of DesignWare Cores Ethernet MAC Universal: 6.2.1.5 Register 4 (Transmit Descriptor List Address Register If this register is not changed when the ST bit is set to 0, then the DMA takes the descriptor address where it was stopped earlier. The stmmac_tx_err() does zero indices to Tx descriptors, but does not reset HW current Tx descriptor address. To fix inconsistency, the base address of the Tx descriptors should be rewritten before restarting Tx. Signed-off-by: Jongsung Kim <neidhard.kim@lge.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06enetc: disable EEE autoneg by defaultYangbo Lu
The EEE support has not been enabled on ENETC, but it may connect to a PHY which supports EEE and advertises EEE by default, while its link partner also advertises EEE. If this happens, the PHY enters low power mode when the traffic rate is low and causes packet loss. This patch disables EEE advertisement by default for any PHY that ENETC connects to, to prevent the above unwanted outcome. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06Merge branch 'next' into for-linusDmitry Torokhov
Prepare second round of updates for 5.5 merge window.
2019-12-06Merge tag 'drm-next-2019-12-06' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull more drm updates from Dave Airlie: "Rob pointed out I missed his pull request for msm-next, it's been in next for a while outside of my tree so shouldn't cause any unexpected issues, it has some OCMEM support in drivers/soc that is acked by other maintainers as it's outside my tree. Otherwise it's a usual fixes pull, i915, amdgpu, the main ones, with some tegra, omap, mgag200 and one core fix. Summary: msm-next: - OCMEM support for a3xx and a4xx GPUs. - a510 support + display support core: - mst payload deletion fix i915: - uapi alignment fix - fix for power usage regression due to security fixes - change default preemption timeout to 640ms from 100ms - EHL voltage level display fixes - TGL DGL PHY fix - gvt - MI_ATOMIC cmd parser fix, CFL non-priv warning - CI spotted deadlock fix - EHL port D programming fix amdgpu: - VRAM lost fixes on BACO for CI/VI - navi14 DC fixes - misc SR-IOV, gfx10 fixes - XGMI fixes for arcturus - SRIOV fixes amdkfd: - KFD on ppc64le enabled - page table optimisations radeon: - fix for r1xx/2xx register checker. tegra: - displayport regression fixes - DMA API regression fixes mgag200: - fix devices that can't scanout except at 0 addr omap: - fix dma_addr refcounting" * tag 'drm-next-2019-12-06' of git://anongit.freedesktop.org/drm/drm: (100 commits) drm/dp_mst: Correct the bug in drm_dp_update_payload_part1() drm/omap: fix dma_addr refcounting drm/tegra: Run hub cleanup on ->remove() drm/tegra: sor: Make the +5V HDMI supply optional drm/tegra: Silence expected errors on IOMMU attach drm/tegra: vic: Export module device table drm/tegra: sor: Implement system suspend/resume drm/tegra: Use proper IOVA address for cursor image drm/tegra: gem: Remove premature import restrictions drm/tegra: gem: Properly pin imported buffers drm/tegra: hub: Remove bogus connection mutex check ia64: agp: Replace empty define with do while agp: Add bridge parameter documentation agp: remove unused variable num_segments agp: move AGPGART_MINOR to include/linux/miscdevice.h agp: remove unused variable size in agp_generic_create_gatt_table drm/dp_mst: Fix build on systems with STACKTRACE_SUPPORT=n drm/radeon: fix r1xx/r2xx register checker for POT textures drm/amdgpu: fix GFX10 missing CSIB set(v3) drm/amdgpu: should stop GFX ring in hw_fini ...
2019-12-06Merge tag 'for-linus-20191205' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull more block and io_uring updates from Jens Axboe: "I wasn't expecting this to be so big, and if I was, I would have used separate branches for this. Going forward I'll be doing separate branches for the current tree, just like for the next kernel version tree. In any case, this contains: - Series from Christoph that fixes an inherent race condition with zoned devices and revalidation. - null_blk zone size fix (Damien) - Fix for a regression in this merge window that caused busy spins by sending empty disk uevents (Eric) - Fix for a regression in this merge window for bfq stats (Hou) - Fix for io_uring creds allocation failure handling (me) - io_uring -ERESTARTSYS send/recvmsg fix (me) - Series that fixes the need for applications to retain state across async request punts for io_uring. This one is a bit larger than I would have hoped, but I think it's important we get this fixed for 5.5. - connect(2) improvement for io_uring, handling EINPROGRESS instead of having applications needing to poll for it (me) - Have io_uring use a hash for poll requests instead of an rbtree. This turned out to work much better in practice, so I think we should make the switch now. For some workloads, even with a fair amount of cancellations, the insertion sort is just too expensive. (me) - Various little io_uring fixes (me, Jackie, Pavel, LimingWu) - Fix for brd unaligned IO, and a warning for the future (Ming) - Fix for a bio integrity data leak (Justin) - bvec_iter_advance() improvement (Pavel) - Xen blkback page unmap fix (SeongJae) The major items in here are all well tested, and on the liburing side we continue to add regression and feature test cases. We're up to 50 topic cases now, each with anywhere from 1 to more than 10 cases in each" * tag 'for-linus-20191205' of git://git.kernel.dk/linux-block: (33 commits) block: fix memleak of bio integrity data io_uring: fix a typo in a comment bfq-iosched: Ensure bio->bi_blkg is valid before using it io_uring: hook all linked requests via link_list io_uring: fix error handling in io_queue_link_head io_uring: use hash table for poll command lookups io-wq: clear node->next on list deletion io_uring: ensure deferred timeouts copy necessary data io_uring: allow IO_SQE_* flags on IORING_OP_TIMEOUT null_blk: remove unused variable warning on !CONFIG_BLK_DEV_ZONED brd: warn on un-aligned buffer brd: remove max_hw_sectors queue limit xen/blkback: Avoid unmapping unmapped grant pages io_uring: handle connect -EINPROGRESS like -EAGAIN block: set the zone size in blk_revalidate_disk_zones atomically block: don't handle bio based drivers in blk_revalidate_disk_zones block: allocate the zone bitmaps lazily block: replace seq_zones_bitmap with conv_zones_bitmap block: simplify blkdev_nr_zones block: remove the empty line at the end of blk-zoned.c ...
2019-12-06Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull vfs d_inode/d_flags memory ordering fixes from Al Viro: "Fallout from tree-wide audit for ->d_inode/->d_flags barriers use. Basically, the problem is that negative pinned dentries require careful treatment - unless ->d_lock is locked or parent is held at least shared, another thread can make them positive right under us. Most of the uses turned out to be safe - the main surprises as far as filesystems are concerned were - race in dget_parent() fastpath, that might end up with the caller observing the returned dentry _negative_, due to insufficient barriers. It is positive in memory, but we could end up seeing the wrong value of ->d_inode in CPU cache. Fixed. - manual checks that result of lookup_one_len_unlocked() is positive (and rejection of negatives). Again, insufficient barriers (we might end up with inconsistent observed values of ->d_inode and ->d_flags). Fixed by switching to a new primitive that does the checks itself and returns ERR_PTR(-ENOENT) instead of a negative dentry. That way we get rid of boilerplate converting negatives into ERR_PTR(-ENOENT) in the callers and have a single place to deal with the barrier-related mess - inside fs/namei.c rather than in every caller out there. The guts of pathname resolution *do* need to be careful - the race found by Ritesh is real, as well as several similar races. Fortunately, it turns out that we can take care of that with fairly local changes in there. The tree-wide audit had not been fun, and I hate the idea of repeating it. I think the right approach would be to annotate the places where we are _not_ guaranteed ->d_inode/->d_flags stability and have sparse catch regressions. But I'm still not sure what would be the least invasive way of doing that and it's clearly the next cycle fodder" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs/namei.c: fix missing barriers when checking positivity fix dget_parent() fastpath race new helper: lookup_positive_unlocked() fs/namei.c: pull positivity check into follow_managed()
2019-12-06Merge tag 'arm-soc/for-5.5/devicetree-part2' of ↵Olof Johansson
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains the second batch of changes for Broadcom ARM-based SoCs, please pull the following: - Nicolas declares a CMA area within the first 1GB of DRAM in order for it to be guaranteed to reside there, otherwise ARM64's memory initialization will pick up a CMA area within ZONE_DMA32 - Stefan adds the Device Tree node for the built-in Ethernet controller (GENET) on the Raspberry Pi 4 model B board * tag 'arm-soc/for-5.5/devicetree-part2' of https://github.com/Broadcom/stblinux: ARM: dts: bcm2711-rpi-4: Enable GENET support ARM: dts: bcm2711: force CMA into first GB of memory Link: https://lore.kernel.org/r/20191118182931.11884-1-f.fainelli@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-06Merge tag 'tegra-for-5.5-memory-fixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes memory: tegra: Fixes for v5.5-rc1 This contains a fix for a kernel panic that can occur on suspend if EMC timings are not available in device tree. * tag 'tegra-for-5.5-memory-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: memory: tegra30-emc: Fix panic on suspend Link: https://lore.kernel.org/r/20191204130753.3614278-1-thierry.reding@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-06Merge tag 'tegra-for-5.5-soc-fixes' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes soc/tegra: Fixes for v5.5-rc1 Fixes a regression for wake events on Tegra194 caused by the Tegra210 support that was added in v5.5-rc1 as well as wrong reset sources and levels on Tegra194. * tag 'tegra-for-5.5-soc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: pmc: Add reset sources and levels on Tegra194 soc/tegra: pmc: Add missing IRQ callbacks on Tegra194 soc/tegra: pmc: Use lower-case for hexadecimal literals Link: https://lore.kernel.org/r/20191204130753.3614278-2-thierry.reding@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-06Merge tag 'tegra-for-5.5-cpufreq' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes cpufreq: tegra: Changes for v5.5-rc1 Implements support for suspend/resume on Tegra124. * tag 'tegra-for-5.5-cpufreq' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: cpufreq: tegra124: Add suspend and resume support Link: https://lore.kernel.org/r/20191204130753.3614278-3-thierry.reding@gmail.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-06Merge tag 'socfpga_update_for_v5.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes SoCFPGA updates for v5.5 - Issue COLD reboot by default for SoCFPGA platforms * tag 'socfpga_update_for_v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm: socfpga: execute cold reboot by default Link: https://lore.kernel.org/r/20191122182106.822-1-dinguyen@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-06Merge tag 'omap-for-v5.5/dt-fixes-merge-window-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Device tree fixes for omap variants for for v5.5 merge window This series of changes contains fixes for few SoC and board specific issues that would be good to have merged for v5.5-rc1: - Fix incorrect MMC card detection polarity for omap3-tao3530 - Fix wrong am57xx-beagle-x15 pinmux named states for eMMC - Fix dra7 cpsw mdio clock that causes wrong speed - Fix vcsi for droid4 so it won't get turned off after init - Fix rev and sysconfig register offsets for omap4 sgx so it can idle Then there are also two minor late changes to logicpd-torpedo-baseboard to configure 1-wire HDQ for battery stats, and remove out of date workaround comments no longer needed. * tag 'omap-for-v5.5/dt-fixes-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Fix sgx sysconfig register for omap4 ARM: dts: Fix vcsi regulator to be always-on for droid4 to prevent hangs ARM: dts: dra7: fix cpsw mdio fck clock ARM: dts: am57xx-beagle-x15: Update pinmux name to ddr_3_3v ARM: dts: omap3-tao3530: Fix incorrect MMC card detection GPIO polarity ARM: dts: logicpd-torpedo: Remove unnecessary notes/comments ARM: dts: logicpd-torpedo-baseboard: Enable HDQ Link: https://lore.kernel.org/r/pull-1574870758-237468@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-06Merge tag 'omap-for-v5.5/ti-sysc-late-signed' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Few ti-sysc related fixes for v5.5 merge window Just few minor changes that can be merged when suitable, but would be good to have these in v5.5-rc1 to remove dependencies between branches for more changes later on in v5.6: - Add quirk handling for AESS (Audio Engine Sub System) - We want to drop the useless gptimer option for omap4 as there are local timers - A minor error path handling improvment for sysc_child_add_named_clock() that will make further patching a bit easier * tag 'omap-for-v5.5/ti-sysc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Adjust exception handling in sysc_child_add_named_clock() ARM: OMAP2+: Drop useless gptimer option for omap4 bus: ti-sysc: Add module enable quirk for audio AESS Link: https://lore.kernel.org/r/pull-1574273726-31367@atomide.com Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-06ARM: multi_v7_defconfig: Restore debugfs supportMarek Szyprowski via Linux.Kernel.Org
Commit fd7d58f0dbc3 ("ARM: multi_v7_defconfig: renormalize based on recent additions") removed explicit enable line for CONFIG_DEBUG_FS, because that feature has been selected by other enabled options: CONFIG_TRACING, which were enabled by CONFIG_PERF_EVENTS. In meantime, commit 0e4a459f56c3 ("tracing: Remove unnecessary DEBUG_FS dependency") removed the dependency between CONFIG_DEBUG_FS and CONFIG_TRACING, so CONFIG_DEBUG_FS is no longer enabled in default builds. Enable it again explicitly, as debugfs support is essential for various automated testing tools. Link: https://lore.kernel.org/r/20191206125112.11006-1-m.szyprowski@samsung.com Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-12-06arm64: entry: refine comment of stack overflow checkHeyi Guo
Stack overflow checking can be done by testing sp & (1 << THREAD_SHIFT) only for the stacks are aligned to (2 << THREAD_SHIFT) with size of (1 << THREAD_SIZE), and this is the case when CONFIG_VMAP_STACK is set. Fix the code comment to avoid confusion. Cc: Will Deacon <will@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Heyi Guo <guoheyi@huawei.com> [catalin.marinas@arm.com: Updated comment following Mark's suggestion] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-12-06arm64: ftrace: fix ifdefferyMark Rutland
When I tweaked the ftrace entry assembly in commit: 3b23e4991fb66f6d ("arm64: implement ftrace with regs") ... my ifdeffery tweaks left ftrace_graph_caller undefined for CONFIG_DYNAMIC_FTRACE && CONFIG_FUNCTION_GRAPH_TRACER when ftrace is based on mcount. The kbuild test robot reported that this issue is detected at link time: | arch/arm64/kernel/entry-ftrace.o: In function `skip_ftrace_call': | arch/arm64/kernel/entry-ftrace.S:238: undefined reference to `ftrace_graph_caller' | arch/arm64/kernel/entry-ftrace.S:238:(.text+0x3c): relocation truncated to fit: R_AARCH64_CONDBR19 against undefined symbol | `ftrace_graph_caller' | arch/arm64/kernel/entry-ftrace.S:243: undefined reference to `ftrace_graph_caller' | arch/arm64/kernel/entry-ftrace.S:243:(.text+0x54): relocation truncated to fit: R_AARCH64_CONDBR19 against undefined symbol | `ftrace_graph_caller' This patch fixes the ifdeffery so that the mcount version of ftrace_graph_caller doesn't depend on CONFIG_DYNAMIC_FTRACE. At the same time, a redundant #else is removed from the ifdeffery for the patchable-function-entry version of ftrace_graph_caller. Fixes: 3b23e4991fb66f6d ("arm64: implement ftrace with regs") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Amit Daniel Kachhap <amit.kachhap@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Torsten Duwe <duwe@lst.de> Cc: Will Deacon <will@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-12-06arm64: KVM: Invoke compute_layout() before alternatives are appliedSebastian Andrzej Siewior
compute_layout() is invoked as part of an alternative fixup under stop_machine(). This function invokes get_random_long() which acquires a sleeping lock on -RT which can not be acquired in this context. Rename compute_layout() to kvm_compute_layout() and invoke it before stop_machine() applies the alternatives. Add a __init prefix to kvm_compute_layout() because the caller has it, too (and so the code can be discarded after boot). Reviewed-by: James Morse <james.morse@arm.com> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-12-06arm64: Validate tagged addresses in access_ok() called from kernel threadsCatalin Marinas
__range_ok(), invoked from access_ok(), clears the tag of the user address only if CONFIG_ARM64_TAGGED_ADDR_ABI is enabled and the thread opted in to the relaxed ABI. The latter sets the TIF_TAGGED_ADDR thread flag. In the case of asynchronous I/O (e.g. io_submit()), the access_ok() may be called from a kernel thread. Since kernel threads don't have TIF_TAGGED_ADDR set, access_ok() will fail for valid tagged user addresses. Example from the ffs_user_copy_worker() thread: use_mm(io_data->mm); ret = ffs_copy_to_iter(io_data->buf, ret, &io_data->data); unuse_mm(io_data->mm); Relax the __range_ok() check to always untag the user address if called in the context of a kernel thread. The user pointers would have already been checked via aio_setup_rw() -> import_{single_range,iovec}() at the time of the asynchronous I/O request. Fixes: 63f0c6037965 ("arm64: Introduce prctl() options to control the tagged user addresses ABI") Cc: <stable@vger.kernel.org> # 5.4.x- Cc: Will Deacon <will@kernel.org> Reported-by: Evgenii Stepanov <eugenis@google.com> Tested-by: Evgenii Stepanov <eugenis@google.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-12-06ARM: 8947/1: Fix __arch_get_hw_counter() access to CNTVCTVincenzo Frascino
__arch_get_hw_counter() should check clock_mode to see if it can access CNTVCT. With the conversion to unified vDSO this check has been left out. This causes on imx v6 and v7 (imx_v6_v7_defconfig) and other platforms to hang at boot during the execution of the init process as per below: [ 19.976852] Run /sbin/init as init process [ 20.044931] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 Fix the problem verifying that clock_mode is set coherently before accessing CNTVCT. Investigated-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-12-06ARM: 8943/1: Fix topology setup in case of CPU hotplug for CONFIG_SCHED_MCDietmar Eggemann
Commit ca74b316df96 ("arm: Use common cpu_topology structure and functions.") changed cpu_coregroup_mask() from the ARM32 specific implementation in arch/arm/include/asm/topology.h to the one shared with ARM64 and RISCV in drivers/base/arch_topology.c. Currently on ARM32 (TC2 w/ CONFIG_SCHED_MC) the task scheduler setup code (w/ CONFIG_SCHED_DEBUG) shows this during CPU hotplug: ERROR: groups don't span domain->span It happens to CPUs of the cluster of the CPU which gets hot-plugged out on scheduler domain MC. Turns out that the shared cpu_coregroup_mask() requires that the hot-plugged CPU is removed from the core_sibling mask via remove_cpu_topology(). Otherwise the 'is core_sibling subset of cpumask_of_node()' doesn't work. In this case the task scheduler has to deal with cpumask_of_node instead of core_sibling which is wrong on scheduler domain MC. e.g. CPU3 hot-plugged out on TC2 [cluster0: 0,3-4 cluster1: 1-2]: cpu_coregroup_mask(): CPU3 cpumask_of_node=0-2,4 core_sibling=0,3-4 ^ should be: cpu_coregroup_mask(): CPU3 cpumask_of_node=0-2,4 core_sibling=0,4 Add remove_cpu_topology() to __cpu_disable() to remove the CPU from the topology masks in case of a CPU hotplug out operation. At the same time tweak store_cpu_topology() slightly so it will call update_siblings_masks() in case of CPU hotplug in operation via secondary_start_kernel()->smp_store_cpu_info(). This aligns the ARM32 implementation with the ARM64 one. Guarding remove_cpu_topology() with CONFIG_GENERIC_ARCH_TOPOLOGY is necessary since some Arm32 defconfigs (aspeed_g5_defconfig, milbeaut_m10v_defconfig, spear13xx_defconfig) specify an explicit # CONFIG_ARM_CPU_TOPOLOGY is not set w/ ./arch/arm/Kconfig: select GENERIC_ARCH_TOPOLOGY if ARM_CPU_TOPOLOGY Fixes: ca74b316df96 ("arm: Use common cpu_topology structure and functions") Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2019-12-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf 2019-12-05 The following pull-request contains BPF updates for your *net* tree. We've added 6 non-merge commits during the last 1 day(s) which contain a total of 14 files changed, 116 insertions(+), 37 deletions(-). The main changes are: 1) three selftests fixes, from Stanislav. 2) one samples fix, from Jesper. 3) one verifier fix, from Yonghong. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06Merge tag 'drm-intel-next-fixes-2019-12-05' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next - Includes gvt-next-fixes-2019-12-02 pull - Fixes for CI spotted eadlock and a race condition in GEM contexts - Fix for EHL port D programming Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191205092412.GA8089@jlahtine-desk.ger.corp.intel.com
2019-12-05Merge branch 'io_uring-5.5' into for-linusJens Axboe
* io_uring-5.5: io_uring: fix a typo in a comment io_uring: hook all linked requests via link_list io_uring: fix error handling in io_queue_link_head io_uring: use hash table for poll command lookups
2019-12-05Merge branch 'next.autofs' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull autofs updates from Al Viro: "autofs misuses checks for ->d_subdirs emptiness; the cursors are in the same lists, resulting in false negatives. It's not needed anyway, since autofs maintains counter in struct autofs_info, containing 0 for removed ones, 1 for live symlinks and 1 + number of children for live directories, which is precisely what we need for those checks. This series switches to use of that counter and untangles the crap around its uses (it needs not be atomic and there's a bunch of completely pointless "defensive" checks). This fell out of dcache_readdir work; the main point is to get rid of ->d_subdirs abuses in there. I've more followup cleanups, but I hadn't run those by Ian yet, so they can go next cycle" * 'next.autofs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: autofs: don't bother with atomics for ino->count autofs_dir_rmdir(): check ino->count for deciding whether it's empty... autofs: get rid of pointless checks around ->count handling autofs_clear_leaf_automount_flags(): use ino->count instead of ->d_subdirs
2019-12-05Merge branch 'pipe-rework' (patches from David Howells)Linus Torvalds
Merge two fixes for the pipe rework from David Howells: "Here are a couple of patches to fix bugs syzbot found in the pipe changes: - An assertion check will sometimes trip when polling a pipe because the ring size and indices used are approximate and may be being changed simultaneously. An equivalent approximate calculation was done previously, but without the assertion check, so I've just dropped the check. To make it accurate, the pipe mutex would need to be taken or the spin lock could be used - but usage of the spinlock would need to be rolled out into splice, iov_iter and other places for that. - The index mask and the max_usage values cannot be cached across pipe_wait() as F_SETPIPE_SZ could have been called during the wait. This can cause pipe_write() to break" * pipe-rework: pipe: Fix missing mask update after pipe_wait() pipe: Remove assertion from pipe_poll()
2019-12-05pipe: Fix missing mask update after pipe_wait()David Howells
Fix pipe_write() to not cache the ring index mask and max_usage as their values are invalidated by calling pipe_wait() because the latter function drops the pipe lock, thereby allowing F_SETPIPE_SZ change them. Without this, pipe_write() may subsequently miscalculate the array indices and pipe fullness, leading to an oops like the following: BUG: KASAN: slab-out-of-bounds in pipe_write+0xc25/0xe10 fs/pipe.c:481 Write of size 8 at addr ffff8880771167a8 by task syz-executor.3/7987 ... CPU: 1 PID: 7987 Comm: syz-executor.3 Not tainted 5.4.0-rc2-syzkaller #0 ... Call Trace: pipe_write+0xc25/0xe10 fs/pipe.c:481 call_write_iter include/linux/fs.h:1895 [inline] new_sync_write+0x3fd/0x7e0 fs/read_write.c:483 __vfs_write+0x94/0x110 fs/read_write.c:496 vfs_write+0x18a/0x520 fs/read_write.c:558 ksys_write+0x105/0x220 fs/read_write.c:611 __do_sys_write fs/read_write.c:623 [inline] __se_sys_write fs/read_write.c:620 [inline] __x64_sys_write+0x6e/0xb0 fs/read_write.c:620 do_syscall_64+0xca/0x5d0 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe This is not a problem for pipe_read() as the mask is recalculated on each pass of the loop, after pipe_wait() has been called. Fixes: 8cefc107ca54 ("pipe: Use head and tail pointers for the ring, not cursor and length") Reported-by: syzbot+838eb0878ffd51f27c41@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Cc: Eric Biggers <ebiggers@kernel.org> [ Changed it to use a temporary variable 'mask' to avoid long lines -Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-05pipe: Remove assertion from pipe_poll()David Howells
An assertion check was added to pipe_poll() to make sure that the ring occupancy isn't seen to overflow the ring size. However, since no locks are held when the three values are read, it is possible for F_SETPIPE_SZ to intervene and muck up the calculation, thereby causing the oops. Fix this by simply removing the assertion and accepting that the calculation might be approximate. Note that the previous code also had a similar issue, though there was no assertion check, since the occupancy counter and the ring size were not read with a lock held, so it's possible that the poll check might have malfunctioned then too. Also wake up all the waiters so that they can reissue their checks if there was a competing read or write. Fixes: 8cefc107ca54 ("pipe: Use head and tail pointers for the ring, not cursor and length") Reported-by: syzbot+d37abaade33a934f16f2@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-12-05ppp: fix out-of-bounds access in bpf_prog_create()Eric Biggers
sock_fprog_kern::len is in units of struct sock_filter, not bytes. Fixes: 3e859adf3643 ("compat_ioctl: unify copy-in of ppp filters") Reported-by: syzbot+eb853b51b10f1befa0b7@syzkaller.appspotmail.com Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-05Merge branch 'hns3-fixes'David S. Miller
Huazhong Tan says: ==================== net: hns3: fixes for -net This patchset includes misc fixes for the HNS3 ethernet driver. [patch 1/3] fixes a TX queue not restarted problem. [patch 2/3] fixes a use-after-free issue. [patch 3/3] fixes a VF ID issue for setting VF VLAN. change log: V1->V2: keeps 'ring' as parameter in hns3_nic_maybe_stop_tx() in [patch 1/3], suggestted by David. rewrites [patch 2/3]'s commit log to make it be easier to understand, suggestted by David. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-05net: hns3: fix VF ID issue for setting VF VLANJian Shen
Previously, when set VF VLAN with command "ip link set <pf name> vf <vf id> vlan <vlan id>", the VF ID 0 is handled as PF incorrectly, which should be the first VF. This patch fixes it. Fixes: 21e043cd8124 ("net: hns3: fix set port based VLAN for PF") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>