summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-04-04drm/ttm: add io_mem_pfn callbackChristian König
This allows the driver to handle io_mem mappings on their own. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-04drm/ttm: cleanup and optimize ttm_bo_mem_compat v2Christian König
No need to implement the same logic twice. Also check if the busy placements are identical to the already scanned placements before checking them. v2: improve check even more as suggested by Michel. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-04drm/amdgpu/vi: add defines for KIQ packetsAlex Deucher
Make it clearer how these packets work. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-04drm/amdgpu/soc15: Fix static checker warningsAlex Deucher
vega10 is the only soc15 asic at the moment so these warnings are invalid, but add a default case to silence the warnings. Fixes: 220ab9bd1ccf: "drm/amdgpu: soc15 enable (v3)" Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-04drm/amdgpu: Read vram width from integrated system info tableHarry Wentland
On KB, KV, CZ we should read the vram width from integrated system table, if we can. The NOOFCHAN in MC_SHARED_CHMAP is not accurate. With this change we can enable two 4k displays on CZ again. This use case was broken sometime in January when we started looking at vram_width for bandwidth calculations instead of hardcoding this value. v2: Return 0 if integrated system info table is not available. Tested-by: Roman Li <roman.li@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-04drm/amdgpu: create a func to check vm sizeZhang, Jerry
break it out from the check parameters function. Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-04drm/amdgpu: Fix a NULL deref in amdgpu_vm_add_prt_cb()Dan Carpenter
We accidentally dereference "cb" if the kmalloc() fails. Fixes: 451bc8eb8fe6 ("drm/amdgpu: fix PRT teardown on VM fini v3") Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-04drm/amd/powerplay: fix a couple locking issuesDan Carpenter
We should return unlock on the error path in pp_dpm_dispatch_tasks() and there is a double lock bug in pp_dpm_set_sclk_od(). Fixes: 2a5071056e6a ("drm/amd/powerplay: add global PowerPlay mutex.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-04drm/amd/powerplay: fix pp_dpm_get_current_power_state() (v2)Dan Carpenter
This switch statement is missing breaks. v2: agd: break in default case as well Fixes: 2a5071056e6a ("drm/amd/powerplay: add global PowerPlay mutex.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-04drm/amdgpu: various cleanups for uvd/vce.Rex Zhu
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-04drm/amdgpu: when resume failed, return error to avoid system hang.Rex Zhu
Continuing if the GPU fails to resume will end in pain. Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-04drm/amdgpu: use a 64bit interval tree for VM management v2Christian König
This only makes a difference for 32-bit systems. The idea is to have a fixed virtual address space size with 4-level page tables and to minimize differences between 32 and 64-bit systems. v2: Update commit message. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-04drm/amdgpu: fix semicolon.cocci warningskbuild test robot
drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c:133:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Acked-by: Huang Rui <ray.huang@amd.com> CC: Huang Rui <ray.huang@amd.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-04drm/amdgpu/powerplay: fix locking typoAlex Deucher
Fixes: 2a5071056e6a601e ("drm/amd/powerplay: add global PowerPlay mutex.") Reported-by: Julia Lawall <julia.lawall@lip6.fr> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-04Merge tag 'omapdrm-4.12' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next omapdrm changes for 4.12 Main changes include: * Add support for render nodes. * Refactor omapdss code to allow multiple DISPC implementations. This is pre-work for DSS6 support. * Fix replication logic bug, which caused RGB565 fb to be shown too dark on a 24bit display. * Improve detection of display stack readiness, which should remove the probe order issues. * Link panel-dpi with its backlight, so that they are turned on/off in sync. * Fix possibly incorrect setup of sync and data-enable signals. * Get rid of DRM_OMAP_NUM_CRTCS config option. * tag 'omapdrm-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (34 commits) drm/omap: Major omap_modeset_init() cleanup drm/omap: Remove the obsolete #define omap_plane _omap_plane hack drm/omap: Fix one ugly indentation style break left by coccinelle drm/omap: Rename enum omap_plane to enum omap_plane_id drm/omap: Get rid of DRM_OMAP_NUM_CRTCS config option drm/omap: fix crash on module unload drm/omap: use drm_atomic_helper_shutdown() drm/omap: fix display SYNC/DE flags drm/omap: dispc: improve debug print of display flags drm/omap: displays: panel-dpi: Support for handling backlight devices drm/omap: poll only connectors where the connect/disconnect can be checked drm/omap: display: Add displays in sorted order to the panel_list drm/omap: Use omapdss_stack_is_ready() to check that the display stack is up drm/omap: dss: Support for detecting display stack readiness drm/omap: dss: Functions to check components in the display/output list drm/omap: fix replication logic drm/omap: remove unused dispc_wb_enable & dispc_wb_is_enabled drm/omap: remove all EXPORT_SYMBOLs from dispc.c drm/omap: use dispc_ops drm/omap: fill dispc_ops ...
2017-04-03drm/omap: Major omap_modeset_init() cleanupJyri Sarha
Cleanup overly complex omap_modeset_init(). The function is trying to support many unusual configuration, that have never been tested and are not supported by other parts of the dirver. After cleanup the init function creates exactly one connector, encoder, crtc, and primary plane per each connected dss-device. Each connector->encoder->crtc chain is expected to be separate and each crtc is connect to a single dss-channel. If the configuration does not match the expectations or exceeds the available resources, the configuration is rejected. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03drm/omap: Remove the obsolete #define omap_plane _omap_plane hackJyri Sarha
Remove the obsolete "#define omap_plane _omap_plane" hack and other related hacks to get around the enum omap_plane colliding with struct omap_plane. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03drm/omap: Fix one ugly indentation style break left by coccinelleJyri Sarha
Fix one ugly indentation style break left by the previous coccilnelle patch. Signed-off-by: Jyri Sarha <jsarha@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03drm/omap: Rename enum omap_plane to enum omap_plane_idJyri Sarha
The enum omap_plane conflicted with the same struct name for omapdrm plane private data. This rename should solve the conflict. The rename was implement with this very simple coccinelle patch: ------------------------ @@ @@ enum -omap_plane +omap_plane_id ------------------------ The patch was applied like this: spatch --sp-file <cocci_file> --all-includes --in-place --dir drivers/gpu/drm/omapdrm The above patch did not rename the actual enum definition. That was added manually on top of the spatch changes. Signed-off-by: Jyri Sarha <jsarha@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03drm/omap: Get rid of DRM_OMAP_NUM_CRTCS config optionJyri Sarha
Allocate one CRTC for each connected output and get rid of DRM_OMAP_NUM_CRTCS config option. We still can not create more CRTCs than we have DSS display managers. We also reserve one overlay per CRTC for primary plane so we can not have more CRTCs than we have overlays either. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03drm/omap: fix crash on module unloadTomi Valkeinen
When unloading omapdrm we get a NULL pointer deref in omap_drm_irq_uninstall(). This is caused by: 967dd48417874dd25491a4e933648f394a64f70f ("drm: remove drm_vblank_no_hw_counter assignment from driver code") We shut down all the crtcs at unload time before calling omap_drm_irq_uninstall, so the code in omap_drm_irq_uninstall() is unnecessary and can be removed. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-04-03drm/omap: use drm_atomic_helper_shutdown()Tomi Valkeinen
Use drm_atomic_helper_shutdown() to ensure that all crtcs are disabled when unloading the driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03drm/omap: fix display SYNC/DE flagsTomi Valkeinen
At the moment VSYNC/HSYNC/DE high/low flags set by the panel/encoder drivers get lost when the videotimings are translated to DRM's videomode, as DRM's mode does not have corresponding flags. DRM has bus-flags for this purpose, and while it lacks a few flags at the moment, it should be used here. However, until we rewrite omapdrm's device model, using bus-flags is rather difficult. As a short term fix, this patch makes sure that every time the videomode is set in omap_crtc_mode_set_nofb(), the driver asks for the SYNC/DE flags from the panel/encoder drivers, and thus we get the correct flags into use. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03drm/omap: dispc: improve debug print of display flagsTomi Valkeinen
Instead of printing 0/1 for display flags like vsync high/low, use a tri-state print (-1/0/1) to indicate the "undefined" state. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03drm/omap: displays: panel-dpi: Support for handling backlight devicesPeter Ujfalusi
The associated backlight device can be configured via DT by providing the phandle to the device. If the backlight device is configured, the driver can manage the backligt along with the panel's power state, iow it can turn on the backlight when the panel is enabled and turn it off when the panel is disabled. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03drm/omap: poll only connectors where the connect/disconnect can be checkedPeter Ujfalusi
When the connector associated detect callback is not provided, we can not detect if the display is connected or disconnected. These displays do not support hot plug, they are always connected. Let DRM know that connectors w/o detect callback should not be polled. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-04-03drm/omap: display: Add displays in sorted order to the panel_listPeter Ujfalusi
Keep the panel_list ordered according to aliases. The DRM connectors will be created following the panel_list. By keeping the list ordered the DRM connectors will be created in the same order regardless of the driver probe order. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03drm/omap: Use omapdss_stack_is_ready() to check that the display stack is upPeter Ujfalusi
Instead of 'guessing' based on aliases of the status of the DSS drivers, use the new interface to check that all needed drivers are loaded. In this way we can be sure that all needed drivers are loaded so it is safe to continue the probing of omapdrm. This method will allow the omapdrm to be probed 'headless', without outputs. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03drm/omap: dss: Support for detecting display stack readinessPeter Ujfalusi
When omapdss is loaded (all core components are in place) create a list of devices used in the display graph. This list later can be used by omapdrm via the omapdss_stack_is_ready() function to check that these components are loaded. Based on this information, omapdrm can defer probe in case when the omapdss stack is not ready yet. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03drm/omap: dss: Functions to check components in the display/output listPeter Ujfalusi
The functions can be used to check a component (by it's of_node) if it is part of the omapdss display or output list. If the component is found, it means that the driver is loaded. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03drm/omap: fix replication logicTomi Valkeinen
DSS uses "replication logic" to convert color components from smaller bit widths to bigger bit widths. Without replication logic, the color component would be shifted and the least significant bits would be left at 0, whereas with replication logic, the least significat bits will be filled with the most significant bit. For some reason omapdrm leaves replication logic always to off, which, in the most common case, means that showing 16-bit RGB colors on 24-bit display gives a bit darker colors than expected. The reset value of the replication logic bit is enabled, and it should always be set, as there's no practical reason to disable it. This patch removes the option to disable it from omapdrm, and always sets it to enabled in dispc. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-04-03drm/omap: remove unused dispc_wb_enable & dispc_wb_is_enabledTomi Valkeinen
Remove two unused WB functions. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-04-03drm/omap: remove all EXPORT_SYMBOLs from dispc.cTomi Valkeinen
omapdrm now uses dispc_ops instead of direct function calls so we can remove all EXPORT_SYMBOLs from dispc. Most of the functions can also be made static, but a few are used outside dispc.c. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03drm/omap: use dispc_opsTomi Valkeinen
Change omapdrm to get dispc_ops and use that to call the dispc functions instead or direct function calls. The change is very straightforward. The only problem was in omap_crtc_init() which calls pipe2vbl(crtc), and at that point of time the crtc->dev link, which is used to get the dispc_ops, has not been set up yet. This patch makes omap_crtc_init() skip the call to pipe2vbl() and instead calls dispc_ops->mgr_get_vsync_irq() directly. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03drm/omap: fill dispc_opsTomi Valkeinen
This patch changes the current omapdss driver to fill a dispc_ops struct and set it to omapdss-base. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03drm/omap: add dispc_opsTomi Valkeinen
We want to change the dispc API from plain functions to a struct with functions pointers, so that omapdrm can call either omapdss or omapdss6 depending on the platform. This patch adds 'struct dispc_ops' and adds functions to omapdss-base to set and get the ops. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03drm/omap: move dispc related dss-feat funcs to dispcTomi Valkeinen
omapdrm still uses a few non-dispc functions: dss_feat_get_num_mgrs(), dss_feat_get_num_ovls() and dss_feat_get_supported_color_modes(). We want to provide omapdrm a single dispc_ops function pointer struct so that omapdrm will use either the current omapdss or the new omapdss6 driver depending on the platform. Those three functions are really dispc functions, but are located in the dss_features.c for legacy reasons. This patch adds similar functionss to the dispc, and changes omapdrm to use those new functions. Underneath the functions still call the functions from dss_feature.c. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03drm/omap: move display, dss-of, output to omapdss-baseTomi Valkeinen
This patch moves the common parts of omapdss to omapdss-base so that both the current omapdss driver and the new omapdss6 driver can use them. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03drm/omap: display: don't use dsi_get_pixel_size()Tomi Valkeinen
display.c uses dsi_get_pixel_size() which is implemented in the DSI driver, and we won't have that in the omapdss-base module, to which we want to move display.c This patch changes display.c not to use dsi_get_pixel_size(). The call can be replaced with a simple check for OMAP_DSS_DSI_FMT_RGB565. We can also make dsi_get_pixel_size() static as it's no longer used outside dsi.c. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03drm/omap: output: use dev_err instead of DSSERRTomi Valkeinen
We don't have omapdss's custom error printing functions in the common omapdss-base module, to which we want to move output.c. This patch changes output.c to use dev_err instead of DSSERR so that it doesn't depend on DSSERR. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-04-03drm/omap: move dss_initialized to omapdss-baseTomi Valkeinen
omapdss_is_initialized() is used to find out if omapdss has been probed successfully. This patch moves the related code to the common omapdss-base module, so that the same support will be there for both omapdss and omapdss6. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03drm/omap: add omapdss-base.koTomi Valkeinen
We are working towards enabling omapdss6, which will consists of a new dss, dispc and dpi drivers. omapdss6 will be a new module. The panel, encoder and omapdrm will need to use either the current omapdss driver or the new omapdss6 driver, depending on the platform. This will be implemented with a common base module and function pointers. This patch adds a skeleton omapdss-base.ko module, to which we'll be moving common dss functionality like registration of the panels. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03drm/omap: fix HDMI sync polaritiesTomi Valkeinen
While implementing writeback support, odd behavior of WBDELAYCOUNT was observed with the combination of WB capture and HDMI. The result of the debugging was that the HDMI sync polarities are not set correctly. The current code sets the sync polarities going from HDMI WP to DISPC according to the video mode used, which seems to work normally fine, but causes problems with WB as WB expects the syncs to be active-high. This patch changes the HDMI sync polarities so that the DISPC always gets active-high syncs from HDMI WP, and the HDMI core gets sync polarities according to the used video mode. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-04-03drm/omap: Add support for render nodesHemant Hariyani
Add support for render nodes in omap driver and allow required ioctls to be accessible via render nodes. This enables unprivileged clients to allocate resources like GEM buffers for rendering their content into. Mode setting (KMS ioctls) is not allowed using render nodes. These buffers are then shared with a previleged process (e.g compositor) that has mode setting access. An example of this use case is Android where the hardware composer is the only master and has mode setting access. Every other client then uses render node(e.g /dev/dri/renderD128 to allocate and use its buffers. Signed-off-by: Hemant Hariyani <hemanthariyani@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03drm/omap: improve DPI clock selection on DRA7xxTomi Valkeinen
The clock source selection for the LCD outputs is too hardcoded at the moment. For example, LCD3 is set to use PLL2_1, and PLL2 doesn't exist on DRA72x SoCs. There are quite many ways to configure the clocks, even using HDMI PLL for LCD outputs, but enabling full configuration of the clocks is rather tricky. This patch improves the situation a bit by checking if the PLL about to be used exists, and if not, tries another one. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03drm/omap: decrease min width & heightTomi Valkeinen
mode_config's min_width and min_height are both set to 32, which is overly restrictive. The real limits depend on whether we're configuring a crtc or a plane, but a limit of 8x2 is safe for both cases. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-04-03drm/omap: remove divider constraint from hsdivTomi Valkeinen
The driver only uses even dividers for hsdiv when pclk >= 100MHz, as odd dividers can create uneven duty cycle. However, while this holds true for some dividers like DISPC's LCK and PCK dividers, it is not actually true for hsdiv. hsdiv always produces even duty cycle, so the constraint can be removed. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-04-03drm/omap: refactor CRTC HW property setupTomi Valkeinen
The current driver doesn't expose any of the CRTC HW properties like background color or transparency key, and sets them at CRTC enable time. Refactor this into a separate function and call that function from omap_crtc_atomic_flush(). This is the behavior we want when the properties can be configured, so this patch makes it easier to add patches later which implement those properties. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2017-04-03drm/omap: work-around for errata i886Tomi Valkeinen
DRA7 errata i886 (FPDLink PLL Unlocks With Certain SoC PLL M/N Values) says that FPDLink is sensitive to jitter on the vout clock, and that low PLL M and N values result in more jitter than high M and N values. This patch implements a workaround for the problem by changing the PLL setup to search for clocks starting from high M and N values, instead of low values. This should not cause any functional change, and only reduces the jitter. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2017-04-03Merge tag 'drm-misc-next-2017-03-31' of ↵Dave Airlie
git://anongit.freedesktop.org/git/drm-misc into drm-next drm-misc for 4.12: Core: - Removed some fb subsampling dimension checks from core (Ville) - Some MST slot cleanup (Dhinakaran) - Extracted drm_debugfs.h & drm_ioctl.h from drmP.h (Daniel) - Added drm_atomic_helper_shutdown() to compliment suspend/resume counterparts (Daniel) - Pipe context through legacy modeset to remove legacy_backoff nasties (Daniel) - Cleanups around vblank as well as allowing lockless counter reads (Chris W.) - VGA Switcheroo added to MAINTAINERS with Lukas Wunner as reviewer (Lukas) Drivers: - Enhancements to rockchip driver probe (Jeffy) and dsi (Chris Z.) - Thunderbolt external GPU awareness added (Lukas) * tag 'drm-misc-next-2017-03-31' of git://anongit.freedesktop.org/git/drm-misc: (63 commits) apple-gmux: Don't switch external DP port on 2011+ MacBook Pros drm/nouveau: Don't register Thunderbolt eGPU with vga_switcheroo drm/amdgpu: Don't register Thunderbolt eGPU with vga_switcheroo drm/radeon: Don't register Thunderbolt eGPU with vga_switcheroo PCI: Recognize Thunderbolt devices MAINTAINERS: Add Lukas Wunner as reviewer for vga_switcheroo drm: Fix locking gotcha in page_flip ioctl drm: Clarify the role of plane_state argument to drm_simple update(). drm: Clear e after kfree in drm_mode_page_flip_ioctl drm: Convert cmpxchg(bool) back to a two step operation drm/bridge: ti-tfp410: support hpd via gpio drm: use .hword to represent 16-bit numbers Revert unrelated part of "drm: simplify the locking in the GETCRTC ioctl" drm: Fixup failure paths in drm_atomic_helper_set_config drm: Peek at the current counter/timestamp for vblank queries drm: Refactor vblank sequence number comparison drm: vblank cannot be enabled if dev->irq_enabled is false drm: Mark up accesses of vblank->enabled outside of its spinlock drm: Make the decision to keep vblank irq enabled earlier drm/atomic-helper: Remove the backoff hack from set_config ...
generated by cgit (git 2.34.1) at 2024-07-06 08:31:48 +0000