summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-08-12usb: misc: usb3503: Factor out I2C probeMark Brown
In preparation for supporting operation without an I2C control interface factor out the I2C-specific parts of the probe routine from those that don't do any register I/O. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12usb: misc: usb3503: Convert to regmapMark Brown
This will give access to the diagnostic infrastructure regmap has but the main point is to support future refactoring. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12usb: misc: usb3503: Actively manage Hub Connect GPIOMark Brown
If the connect signal is pulled high then the device will start up meaning that if we just pull it high on probe then the device will start running prior to the configuration being written out. Fix this by pulling the GPIO low when we reset and only pulling it high when configuration is finished. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12usb: misc: usb3503: Use gpio_set_value_cansleep()Mark Brown
The /RESET GPIO is not manipulated from atomic context so support GPIOs that can't be written from atomic context by using _cansleep(). Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12usb: Move definition of USB_EHCI_BIG_ENDIAN_MMIO et al. out side of the ifs.David Daney
When CONFIG_USB_SUPPORT is not selected we get things like: scripts/kconfig/mconf Kconfig warning: (MIPS_SEAD3 && PMC_MSP && CPU_CAVIUM_OCTEON) selects USB_EHCI_BIG_ENDIAN_MMIO which has unmet direct dependencies (USB_SUPPORT && USB) It is much cleaner to make the various system Kconfigs select USB_EHCI_BIG_ENDIAN_MMIO rather than move the system config information into USB's Kconfig, but the warnings are annoying. Eliminate the warning by moving the definition of USB_EHCI_BIG_ENDIAN_MMIO outside of all the Kconfig if statements. While we are at it move USB_OHCI_BIG_ENDIAN_DESC, USB_OHCI_BIG_ENDIAN_MMIO, USB_OHCI_LITTLE_ENDIAN and USB_EHCI_BIG_ENDIAN_DESC too, as they could very well suffer similar problems for other systems. Get rid of the redundant "default n" in USB_OHCI_BIG_ENDIAN_DESC and USB_OHCI_BIG_ENDIAN_MMIO Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12usb: misc: usb3503: Convert to devm_ APIsMark Brown
Saves us a bit of code. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12usb: misc: Fix swapped properties in usb3503 DT parsingMark Brown
The intn and connect GPIO properties are swapped in the code which will cause failures at runtime if these are connected, fix the code. There are currently no in-tree users of this device to check or update. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12USB: serial: move the "simple" drivers into usb-serial-simple.cGreg Kroah-Hartman
Instead of having to create a new driver for a "simple" usb to serial device, mush them all into one file, with a macro, so as to make it easy to add new ones. Cc: "René Bürgel" <rene.buergel@sohard.de> Acked-by: Wei Shuai <cpuwolf@gmail.com> Cc: Josh Triplett <josh@joshtriplett.org> Acked-by: Frans Klaver <frans.klaver@xsens.com> Cc: "Wesley W. Terpstra" <w.terpstra@gsi.de> Cc: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12USBNET: ax88179_178a: enable tso if usb host supports sg dmaMing Lei
This patch enables 'can_dma_sg' flag for ax88179_178a device if the attached host controller supports building packet from discontinuous buffers(DMA SG is possible), so TSO can be enabled and skb fragment buffers can be passed to usb stack via urb->sg directly. With the patch, system CPU utilization decreased ~50% and throughput increased by ~10% when doing iperf client test on one ARM A15 dual core board. Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Grant Grundler <grundler@google.com> Cc: Oliver Neukum <oneukum@suse.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Freddy Xin <freddy@asix.com.tw> Signed-off-by: Ming Lei <ming.lei@canonical.com> Acked-by: Eric Dumazet <edumazet@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12USBNET: support DMA SGMing Lei
This patch introduces support of DMA SG if the USB host controller which usbnet device is attached to is capable of building packet from discontinuous buffers. The patch supports passing the skb fragment buffers to usb stack directly via urb->sg. Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Grant Grundler <grundler@google.com> Cc: Freddy Xin <freddy@asix.com.tw> Cc: Alan Stern <stern@rowland.harvard.edu> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12USB: XHCI: mark no_sg_constraintMing Lei
This patch marks all xHCI controllers as no_sg_constraint since xHCI supports building packet from discontinuous buffers. Cc: Alan Stern <stern@rowland.harvard.edu> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12USB: introduce usb_device_no_sg_constraint() helperMing Lei
Some host controllers(such as xHCI) can support building packet from discontinuous buffers, so introduce one flag and helper for this kind of host controllers, then the feature can help some applications(such as usbnet) by supporting arbitrary length of sg buffers. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12USB: EHCI: support running URB giveback in tasklet contextMing Lei
All 4 transfer types can work well on EHCI HCD after switching to run URB giveback in tasklet context, so mark all HCD drivers to support it. Also we don't need to release ehci->lock during URB giveback any more. >From below test results on 3 machines(2 ARM and one x86), time consumed by EHCI interrupt handler droped much without performance loss. 1 test description 1.1 mass storage performance test: - run below command 10 times and compute the average performance dd if=/dev/sdN iflag=direct of=/dev/null bs=200M count=1 - two usb mass storage device: A: sandisk extreme USB 3.0 16G(used in test case 1 & case 2) B: kingston DataTraveler G2 4GB(only used in test case 2) 1.2 uvc function test: - run one simple capture program in the below link http://kernel.ubuntu.com/~ming/up/capture.c - capture format 640*480 and results in High Bandwidth mode on the uvc device: Z-Star 0x0ac8/0x3450 - on T410(x86) laptop, also use guvcview to watch video capture/playback 1.3 about test2 and test4 - both two devices involved are tested concurrently by above test items 1.4 how to compute irq time(the time consumed by ehci_irq) - use trace points of irq:irq_handler_entry and irq:irq_handler_exit 1.5 kernel 3.10.0-rc3-next-20130528 1.6 test machines Pandaboard A1: ARM CortexA9 dural core Arndale board: ARM CortexA15 dural core T410: i5 CPU 2.67GHz quad core 2 test result 2.1 test case1: single mass storage device performance test -------------------------------------------------------------------- upstream | patched perf(MB/s)+irq time(us) | perf(MB/s)+irq time(us) -------------------------------------------------------------------- Pandaboard A1: 25.280(avg:145,max:772) | 25.540(avg:14, max:75) Arndale board: 29.700(avg:33, max:129) | 29.700(avg:10, max:50) T410: 34.430(avg:17, max:154*)| 34.660(avg:12, max:155) --------------------------------------------------------------------- 2.2 test case2: two mass storage devices' performance test -------------------------------------------------------------------- upstream | patched perf(MB/s)+irq time(us) | perf(MB/s)+irq time(us) -------------------------------------------------------------------- Pandaboard A1: 15.840/15.580(avg:158,max:1216) | 16.500/16.160(avg:15,max:139) Arndale board: 17.370/16.220(avg:33 max:234) | 17.480/16.200(avg:11, max:91) T410: 21.180/19.820(avg:18 max:160) | 21.220/19.880(avg:11, max:149) --------------------------------------------------------------------- 2.3 test case3: one uvc streaming test - uvc device works well(on x86, luvcview can be used too and has same result with uvc capture) -------------------------------------------------------------------- upstream | patched irq time(us) | irq time(us) -------------------------------------------------------------------- Pandaboard A1: (avg:445, max:873) | (avg:33, max:44) Arndale board: (avg:316, max:630) | (avg:20, max:27) T410: (avg:39, max:107) | (avg:10, max:65) --------------------------------------------------------------------- 2.4 test case4: one uvc streaming plus one mass storage device test -------------------------------------------------------------------- upstream | patched perf(MB/s)+irq time(us) | perf(MB/s)+irq time(us) -------------------------------------------------------------------- Pandaboard A1: 20.340(avg:259,max:1704)| 20.390(avg:24, max:101) Arndale board: 23.460(avg:124,max:726) | 23.370(avg:15, max:52) T410: 28.520(avg:27, max:169) | 28.630(avg:13, max:160) --------------------------------------------------------------------- 2.5 test case5: read single mass storage device with small transfer - run below command 10 times and compute the average speed dd if=/dev/sdN iflag=direct of=/dev/null bs=4K count=4000 1), test device A: -------------------------------------------------------------------- upstream | patched perf(MB/s)+irq time(us) | perf(MB/s)+irq time(us) -------------------------------------------------------------------- Pandaboard A1: 6.5(avg:21, max:64) | 6.5(avg:10, max:24) Arndale board: 8.13(avg:12, max:23) | 8.06(avg:7, max:17) T410: 6.66(avg:13, max:131) | 6.84(avg:11, max:149) --------------------------------------------------------------------- 2), test device B: -------------------------------------------------------------------- upstream | patched perf(MB/s)+irq time(us) | perf(MB/s)+irq time(us) -------------------------------------------------------------------- Pandaboard A1: 5.5(avg:21,max:43) | 5.49(avg:10, max:24) Arndale board: 5.9(avg:12, max:22) | 5.9(avg:7, max:17) T410: 5.48(avg:13, max:155) | 5.48(avg:7, max:140) --------------------------------------------------------------------- * On T410, sometimes read ehci status register in ehci_irq takes more than 100us, and the problem has been reported on the link: http://marc.info/?t=137065867300001&r=1&w=2 Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12USB: EHCI: improve interrupt qh unlinkMing Lei
ehci-hcd currently unlinks an interrupt QH when it becomes empty, that is, after its last URB completes. This works well because in almost all cases, the completion handler for an interrupt URB resubmits the URB; therefore the QH doesn't become empty and doesn't get unlinked. When we start using tasklets for URB completion, this scheme won't work as well. The resubmission won't occur until the tasklet runs, which will be some time after the completion is queued with the tasklet. During that delay, the QH will be empty and so will be unlinked unnecessarily. To prevent this problem, this patch adds a 5-ms time delay before empty interrupt QHs are unlinked. Most often, during that time the interrupt URB will be resubmitted and thus we can avoid unlinking the QH. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12USB: EHCI: improve ehci_endpoint_disableMing Lei
The patch does the below improvement: - think QH_STATE_COMPLETING as unlinking state since all URBs on the endpoint should be in unlinking or unlinked when doing endpoint_disable() - add "WARN_ON(!list_empty(&qh->qtd_list));" if qh->qh_state is QH_STATE_LINKED because there shouldn't be any active transfer in qh - when qh->qh_state is QH_STATE_LINKED, the QH(async or periodic) should be in its corresponding list, so the search through the async list isn't necessary. - unlink periodic QH to speed up unlinking if the QH is in linked state Basically, only the last one is related with this patchset because the assumption of "periodic qh self-unlinks on empty" isn't true any more when we introduce unlink-wait for periodic qh. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12USB: URB documentation: claim complete() will be run with IRQs enabledMing Lei
There is no good reason to run complete() in hard interrupt disabled context. After switch to run complete() in tasklet, we will enable local IRQs when calling complete() since we can do it at that time. Even though we still disable IRQs now when calling complete() in tasklet, the URB documentation is updated to claim complete() will be run in tasklet context and local IRQs will be enabled, so that USB drivers can know the change and avoid one deadlock caused by: assume IRQs disabled in complete() and call spin_lock() to hold lock which might be acquired in interrupt context. Current spin_lock() usages in drivers' complete() will be cleaned up at the same time, and once the cleanup is finished, local IRQs will be enabled when calling complete() in tasklet. Also fix description about type of usb_complete_t, and remove the advice of running completion handler in tasklet for decreasing system latency. Cc: Oliver Neukum <oliver@neukum.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12USB: HCD: support giveback of URB in tasklet contextMing Lei
This patch implements the mechanism of giveback of URB in tasklet context, so that hardware interrupt handling time for usb host controller can be saved much, and HCD interrupt handling can be simplified. Motivations: 1), on some arch(such as ARM), DMA mapping/unmapping is a bit time-consuming, for example: when accessing usb mass storage via EHCI on pandaboard, the common length of transfer buffer is 120KB, the time consumed on DMA unmapping may reach hundreds of microseconds; even on A15 based box, the time is still about scores of microseconds 2), on some arch, reading DMA coherent memoery is very time-consuming, the most common example is usb video class driver[1] 3), driver's complete() callback may do much things which is driver specific, so the time is consumed unnecessarily in hardware irq context. 4), running driver's complete() callback in hardware irq context causes that host controller driver has to release its lock in interrupt handler, so reacquiring the lock after return may busy wait a while and increase interrupt handling time. More seriously, releasing the HCD lock makes HCD becoming quite complicated to deal with introduced races. So the patch proposes to run giveback of URB in tasklet context, then time consumed in HCD irq handling doesn't depend on drivers' complete and DMA mapping/unmapping any more, also we can simplify HCD since the HCD lock isn't needed to be released during irq handling. The patch should be reasonable and doable: 1), for drivers, they don't care if the complete() is called in hard irq context or softirq context 2), the biggest change is the situation in which usb_submit_urb() is called in complete() callback, so the introduced tasklet schedule delay might be a con, but it shouldn't be a big deal: - control/bulk asynchronous transfer isn't sensitive to schedule delay - the patch schedules giveback of periodic URBs using tasklet_hi_schedule, so the introduced delay should be very small - for ISOC transfer, generally, drivers submit several URBs concurrently to avoid interrupt delay, so it is OK with the little schedule delay. - for interrupt transfer, generally, drivers only submit one URB at the same time, but interrupt transfer is often used in event report, polling, ... situations, and a little delay should be OK. Considered that HCDs may optimize on submitting URB in complete(), the patch may cause the optimization not working, so introduces one flag to mark if the HCD supports to run giveback URB in tasklet context. When all HCDs are ready, the flag can be removed. [1], http://marc.info/?t=136438111600010&r=1&w=2 Cc: Oliver Neukum <oliver@neukum.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-05Merge 3.11-rc4 into usb-nextGreg Kroah-Hartman
We want those fixes in here also. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-04Linux 3.11-rc4Linus Torvalds
2013-08-04Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull dmaengine fixes from Vinod Koul: "Two fixes for slave dmaengine. The first fixes cyclic dma transfers for pl330 and the second one makes us return the correct error code on probe" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: pl330: Fix cyclic transfers pch_dma: fix error return code in pch_dma_probe()
2013-08-04Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fix from Dave Airlie: "Just a quick fix that a few people have reported, be nice to have in asap" The drm tree seems to be very confused about 64-bit divides. Here it uses a slow 64-by-64 bit divide to divide by a small constant. Oh well. Doesn't look performance-critical, just stupid. * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: fix 64 bit divide in SI spm code
2013-08-04tmpfs: fix SEEK_DATA/SEEK_HOLE regressionHugh Dickins
Commit 46a1c2c7ae53 ("vfs: export lseek_execute() to modules") broke the tmpfs SEEK_DATA/SEEK_HOLE implementation, because vfs_setpos() converts the carefully prepared -ENXIO to -EINVAL. Other filesystems avoid it in error cases: do the same in tmpfs. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-04Merge tag 'sound-3.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "All small regression or small fixes, nothing surprising at this stage. - regression fix for intel Mac Mini quirk - compress ioctl error fix - ASoC fixes for control change notifications, some UI fixes, driver-specific fixes (resource leak, build errors, etc)" * tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix missing fixup for Mac Mini with STAC9221 ASoC: wm0010: Fix resource leak ASoC: au1x: Fix build ASoC: bf5xx-ac97: Fix compile error with SND_BF5XX_HAVE_COLD_RESET ASoC: bfin-ac97: Fix prototype error following AC'97 refactoring ALSA: compress: fix the return value for SNDRV_COMPRESS_VERSION ASoC: dapm: Fix return value of snd_soc_dapm_put_{volsw,enum_virt}()
2013-08-04drm/radeon: fix 64 bit divide in SI spm codeAlex Deucher
Forgot to use the appropriate math64 function. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2013-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Don't ignore user initiated wireless regulatory settings on cards with custom regulatory domains, from Arik Nemtsov. 2) Fix length check of bluetooth information responses, from Jaganath Kanakkassery. 3) Fix misuse of PTR_ERR in btusb, from Adam Lee. 4) Handle rfkill properly while iwlwifi devices are offline, from Emmanuel Grumbach. 5) Fix r815x devices DMA'ing to stack buffers, from Hayes Wang. 6) Kernel info leak in ATM packet scheduler, from Dan Carpenter. 7) 8139cp doesn't check for DMA mapping errors, from Neil Horman. 8) Fix bridge multicast code to not snoop when no querier exists, otherwise mutlicast traffic is lost. From Linus Lüssing. 9) Avoid soft lockups in fib6_run_gc(), from Michal Kubecek. 10) Fix races in automatic address asignment on ipv6, which can result in incorrect lifetime assignments. From Jiri Benc. 11) Cure build bustage when CONFIG_NET_LL_RX_POLL is not set and rename it CONFIG_NET_RX_BUSY_POLL to eliminate the last reference to the original naming of this feature. From Cong Wang. 12) Fix crash in TIPC when server socket creation fails, from Ying Xue. 13) macvlan_changelink() silently succeeds when it shouldn't, from Michael S Tsirkin. 14) HTB packet scheduler can crash due to sign extension, fix from Stephen Hemminger. 15) With the cable unplugged, r8169 prints out a message every 10 seconds, make it netif_dbg() instead of netif_warn(). From Peter Wu. 16) Fix memory leak in rtm_to_ifaddr(), from Daniel Borkmann. 17) sis900 gets spurious TX queue timeouts due to mismanagement of link carrier state, from Denis Kirjanov. 18) Validate somaxconn sysctl to make sure it fits inside of a u16. From Roman Gushchin. 19) Fix MAC address filtering on qlcnic, from Shahed Shaikh. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (68 commits) qlcnic: Fix for flash update failure on 83xx adapter qlcnic: Fix link speed and duplex display for 83xx adapter qlcnic: Fix link speed display for 82xx adapter qlcnic: Fix external loopback test. qlcnic: Removed adapter series name from warning messages. qlcnic: Free up memory in error path. qlcnic: Fix ingress MAC learning qlcnic: Fix MAC address filter issue on 82xx adapter net: ethernet: davinci_emac: drop IRQF_DISABLED netlabel: use domain based selectors when address based selectors are not available net: check net.core.somaxconn sysctl values sis900: Fix the tx queue timeout issue net: rtm_to_ifaddr: free ifa if ifa_cacheinfo processing fails r8169: remove "PHY reset until link up" log spam net: ethernet: cpsw: drop IRQF_DISABLED htb: fix sign extension bug macvlan: handle set_promiscuity failures macvlan: better mode validation tipc: fix oops when creating server socket fails net: rename CONFIG_NET_LL_RX_POLL to CONFIG_NET_RX_BUSY_POLL ...
2013-08-03qlcnic: Fix for flash update failure on 83xx adapterHimanshu Madhani
Flash update routine was improperly checking register read API return value. Modify register read API and perform proper error check. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Fix link speed and duplex display for 83xx adapterRajesh Borundia
o Set link speed and duplex to unknown when link is not up. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Fix link speed display for 82xx adapterRajesh Borundia
o Do not obtain link speed from register when adapter link is down. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Fix external loopback test.Shahed Shaikh
Driver was not handling external loopback diagnostic test request. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Removed adapter series name from warning messages.Pratik Pujar
Signed-off-by: Pratik Pujar <pratik.pujar@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Free up memory in error path.Himanshu Madhani
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Fix ingress MAC learningShahed Shaikh
o Delete MAC address from the adapter's filter table if the source MAC address of ingress packet matches. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Fix MAC address filter issue on 82xx adapterShahed Shaikh
Driver was passing the address of a pointer instead of the pointer itself. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03net: ethernet: davinci_emac: drop IRQF_DISABLEDMugunthan V N
IRQF_DISABLED is a no-op by now and should be removed. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03Merge branch 'for-3.11' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd bugfixes from Bruce Fields: "Most of this is due to a screwup on my part -- some gss-proxy crashes got fixed before the merge window but somehow never made it out of a temporary git repo on my laptop...." * 'for-3.11' of git://linux-nfs.org/~bfields/linux: svcrpc: set cr_gss_mech from gss-proxy as well as legacy upcall svcrpc: fix kfree oops in gss-proxy code svcrpc: fix gss-proxy xdr decoding oops svcrpc: fix gss_rpc_upcall create error NFSD/sunrpc: avoid deadlock on TCP connection due to memory pressure.
2013-08-03Merge tag 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Fix chip initialization/configuration in MAX6697 driver" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (max6697) fix MAX6581 ideality
2013-08-03Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull arm fixes fixes from Russell King: "This fixes a couple of problems with commit 48be69a026b2 ("ARM: move signal handlers into a vdso-like page"), one of which was originally discovered via my testing originally, but the fix for it was never actually committed. The other shows up on noMMU builds, and such platforms are extremely rare and as such are not part of my nightly testing" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: fix nommu builds with 48be69a02 (ARM: move signal handlers into a vdso-like page) ARM: fix a cockup in 48be69a02 (ARM: move signal handlers into a vdso-like page)
2013-08-03hwmon: (max6697) fix MAX6581 idealityVivien Didelot
Without this patch, the values for ideality (register 0x4b) and ideality selection mask (register 0x4c) are inverted. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: stable@vger.kernel.org # 3.9+ Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-08-03Merge branch 'security-fixes' into fixesRussell King
2013-08-03ARM: fix nommu builds with 48be69a02 (ARM: move signal handlers into a ↵Russell King
vdso-like page) Olof reports that noMMU builds error out with: arch/arm/kernel/signal.c: In function 'setup_return': arch/arm/kernel/signal.c:413:25: error: 'mm_context_t' has no member named 'sigpage' This shows one of the evilnesses of IS_ENABLED(). Get rid of it here and replace it with #ifdef's - and as no noMMU platform can make use of sigpage, depend on CONIFG_MMU not CONFIG_ARM_MPU. Reported-by: Olof Johansson <olof@lixom.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-03ARM: fix a cockup in 48be69a02 (ARM: move signal handlers into a vdso-like page)Russell King
Unfortunately, I never committed the fix to a nasty oops which can occur as a result of that commit: ------------[ cut here ]------------ kernel BUG at /home/olof/work/batch/include/linux/mm.h:414! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 490 Comm: killall5 Not tainted 3.11.0-rc3-00288-gabe0308 #53 task: e90acac0 ti: e9be8000 task.ti: e9be8000 PC is at special_mapping_fault+0xa4/0xc4 LR is at __do_fault+0x68/0x48c This doesn't show up unless you do quite a bit of testing; a simple boot test does not do this, so all my nightly tests were passing fine. The reason for this is that install_special_mapping() expects the page array to stick around, and as this was only inserting one page which was stored on the kernel stack, that's why this was blowing up. Reported-by: Olof Johansson <olof@lixom.net> Tested-by: Olof Johansson <olof@lixom.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-08-03usb: fix some scripts/kernel-doc warningsYacine Belkadi
When building the htmldocs (in verbose mode), scripts/kernel-doc reports the following type of warnings: Warning(drivers/usb/core/usb.c:76): No description found for return value of 'usb_find_alt_setting' Fix them by: - adding some missing descriptions of return values - using "Return" sections for those descriptions Signed-off-by: Yacine Belkadi <yacine.belkadi.1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-02netlabel: use domain based selectors when address based selectors are not ↵Paul Moore
available NetLabel has the ability to selectively assign network security labels to outbound traffic based on either the LSM's "domain" (different for each LSM), the network destination, or a combination of both. Depending on the type of traffic, local or forwarded, and the type of traffic selector, domain or address based, different hooks are used to label the traffic; the goal being minimal overhead. Unfortunately, there is a bug such that a system using NetLabel domain based traffic selectors does not correctly label outbound local traffic that is not assigned to a socket. The issue is that in these cases the associated NetLabel hook only looks at the address based selectors and not the domain based selectors. This patch corrects this by checking both the domain and address based selectors so that the correct labeling is applied, regardless of the configuration type. In order to acomplish this fix, this patch also simplifies some of the NetLabel domainhash structures to use a more common outbound traffic mapping type: struct netlbl_dommap_def. This simplifies some of the code in this patch and paves the way for further simplifications in the future. Signed-off-by: Paul Moore <pmoore@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02net: check net.core.somaxconn sysctl valuesRoman Gushchin
It's possible to assign an invalid value to the net.core.somaxconn sysctl variable, because there is no checks at all. The sk_max_ack_backlog field of the sock structure is defined as unsigned short. Therefore, the backlog argument in inet_listen() shouldn't exceed USHRT_MAX. The backlog argument in the listen() syscall is truncated to the somaxconn value. So, the somaxconn value shouldn't exceed 65535 (USHRT_MAX). Also, negative values of somaxconn are meaningless. before: $ sysctl -w net.core.somaxconn=256 net.core.somaxconn = 256 $ sysctl -w net.core.somaxconn=65536 net.core.somaxconn = 65536 $ sysctl -w net.core.somaxconn=-100 net.core.somaxconn = -100 after: $ sysctl -w net.core.somaxconn=256 net.core.somaxconn = 256 $ sysctl -w net.core.somaxconn=65536 error: "Invalid argument" setting key "net.core.somaxconn" $ sysctl -w net.core.somaxconn=-100 error: "Invalid argument" setting key "net.core.somaxconn" Based on a prior patch from Changli Gao. Signed-off-by: Roman Gushchin <klamm@yandex-team.ru> Reported-by: Changli Gao <xiaosuo@gmail.com> Suggested-by: Eric Dumazet <edumazet@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02sis900: Fix the tx queue timeout issueDenis Kirjanov
[ 198.720048] ------------[ cut here ]------------ [ 198.720108] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:255 dev_watchdog+0x229/0x240() [ 198.720118] NETDEV WATCHDOG: eth0 (sis900): transmit queue 0 timed out [ 198.720125] Modules linked in: bridge stp llc dmfe sundance 3c59x sis900 mii [ 198.720159] CPU: 0 PID: 0 Comm: swapper Not tainted 3.11.0-rc3+ #12 [ 198.720167] Hardware name: System Manufacturer System Name/TUSI-M, BIOS ASUS TUSI-M ACPI BIOS Revision 1013 Beta 001 12/14/2001 [ 198.720175] 000000ff c13fa6b9 c169ddcc c12208d6 c169ddf8 c1031e4d c1664a84 c169de24 [ 198.720197] 00000000 c165f5ea 000000ff c13fa6b9 00000001 000000ff c1664a84 c169de10 [ 198.720217] c1031f13 00000009 c169de08 c1664a84 c169de24 c169de50 c13fa6b9 c165f5ea [ 198.720240] Call Trace: [ 198.720257] [<c13fa6b9>] ? dev_watchdog+0x229/0x240 [ 198.720274] [<c12208d6>] dump_stack+0x16/0x20 [ 198.720306] [<c1031e4d>] warn_slowpath_common+0x7d/0xa0 [ 198.720318] [<c13fa6b9>] ? dev_watchdog+0x229/0x240 [ 198.720330] [<c1031f13>] warn_slowpath_fmt+0x33/0x40 [ 198.720342] [<c13fa6b9>] dev_watchdog+0x229/0x240 [ 198.720357] [<c103f158>] call_timer_fn+0x78/0x150 [ 198.720369] [<c103f0e0>] ? internal_add_timer+0x40/0x40 [ 198.720381] [<c13fa490>] ? dev_init_scheduler+0xa0/0xa0 [ 198.720392] [<c103f33f>] run_timer_softirq+0x10f/0x200 [ 198.720412] [<c103954f>] ? __do_softirq+0x6f/0x210 [ 198.720424] [<c13fa490>] ? dev_init_scheduler+0xa0/0xa0 [ 198.720435] [<c1039598>] __do_softirq+0xb8/0x210 [ 198.720467] [<c14b54d2>] ? _raw_spin_unlock+0x22/0x30 [ 198.720484] [<c1003245>] ? handle_irq+0x25/0xd0 [ 198.720496] [<c1039c0c>] irq_exit+0x9c/0xb0 [ 198.720508] [<c14bc9d7>] do_IRQ+0x47/0x94 [ 198.720534] [<c1056078>] ? hrtimer_start+0x28/0x30 [ 198.720564] [<c14bc8b1>] common_interrupt+0x31/0x38 [ 198.720589] [<c1008692>] ? default_idle+0x22/0xa0 [ 198.720600] [<c10083c7>] arch_cpu_idle+0x17/0x30 [ 198.720631] [<c106d23d>] cpu_startup_entry+0xcd/0x180 [ 198.720643] [<c14ae30a>] rest_init+0xaa/0xb0 [ 198.720654] [<c14ae260>] ? reciprocal_value+0x50/0x50 [ 198.720668] [<c17044e0>] ? repair_env_string+0x60/0x60 [ 198.720679] [<c1704bda>] start_kernel+0x29a/0x350 [ 198.720690] [<c17044e0>] ? repair_env_string+0x60/0x60 [ 198.720721] [<c1704269>] i386_start_kernel+0x39/0xa0 [ 198.720729] ---[ end trace 81e0a6266f5c73a8 ]--- [ 198.720740] eth0: Transmit timeout, status 00000204 00000000 timer routine checks the link status and if it's up calls netif_carrier_on() allowing upper layer to start the tx queue even if the auto-negotiation process is not finished. Also remove ugly auto-negotiation check from the sis900_start_xmit() CC: Duan Fugang <B38611@freescale.com> CC: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband/rdma fixes from Roland Dreier: - Fixes for the newly merged mlx5 hardware driver - Stack info leak fixes from Dan Carpenter - Fixes for pkey table handling with SR-IOV - A few other small things * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: Fix pkey change flow for virtualization environments IPoIB: Make sure child devices use valid/proper pkeys IB/core: Create QP1 using the pkey index which contains the default pkey mlx5_core: Variable may be used uninitialized mlx5_core: Implement new initialization sequence mlx5_core: Fix use after free in mlx5_cmd_comp_handler() IB/mlx5: Fix stack info leak in mlx5_ib_alloc_ucontext() IB/mlx5: Fix error return code in init_one() IB/mlx4: Use default pkey when creating tunnel QPs RDMA/cma: Only call cma_save_ib_info() for CM REQs RDMA/cma: Fix accessing invalid private data for UD RDMA/cma: Fix gcc warning Revert "RDMA/nes: Fix compilation error when nes_debug is enabled" IB/qib: Add err_decode() call for ring dump RDMA/cxgb3: Fix stack info leak in iwch_create_cq() RDMA/nes: Fix info leaks in nes_create_qp() and nes_create_cq() RDMA/ocrdma: Fix several stack info leaks RDMA/cxgb4: Fix stack info leak in c4iw_create_qp() RDMA/ocrdma: Remove unused include
2013-08-02Merge tag 'gpio-for-v3.11-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Yet another GPIO pull request, fixing the fix from the last one. It turns out that fixing the boot path for device tree boots on OMAP breaks out antique systems (such as OMAP1) and we need to find a better way. So we're reverting that "fix" for the moment and thinking about something better. Also fixing a build issue on the MSM driver" * tag 'gpio-for-v3.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio_msm: Fix build error due to missing err.h Revert "gpio/omap: don't create an IRQ mapping for every GPIO on DT" Revert "gpio/omap: auto request GPIO as input if used as IRQ via DT" Revert "gpio/omap: fix build error when OF_GPIO is not defined."
2013-08-02net: rtm_to_ifaddr: free ifa if ifa_cacheinfo processing failsDaniel Borkmann
Commit 5c766d642 ("ipv4: introduce address lifetime") leaves the ifa resource that was allocated via inet_alloc_ifa() unfreed when returning the function with -EINVAL. Thus, free it first via inet_free_ifa(). Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02r8169: remove "PHY reset until link up" log spamLekensteyn
This message was added in commit a7154cb8 (June 2004, [PATCH] r8169: link handling and phy reset rework) and is printed every ten seconds when no cable is connected and runtime power management is disabled. (Before that commit, "Reset RTL8169s PHY" would be printed instead.) Signed-off-by: Peter Wu <lekensteyn@gmail.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02net: ethernet: cpsw: drop IRQF_DISABLEDFelipe Balbi
IRQF_DISABLED is a no-op by now and should be removed. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-07-02 15:41:29 +0000