| Age | Commit message (Collapse) | Author |
|---|
|
Follow the lead of xfs_break_dax_layouts() and add synchronization between
operations in ext4 which remove blocks from an inode (hole punch, truncate
down, etc.) and pages which are pinned due to DAX DMA operations.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
|
|
Inodes using DAX should only ever have exceptional entries in their page
caches. Make this clear by warning if the iteration in
dax_layout_busy_page() ever sees a non-exceptional entry, and by adding a
comment for the pagevec_release() call which only deals with struct page
pointers.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
|
|
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The superblock timestamp fields were enlarged by u8 to be 40 bits wide.
Update the documentation to reflect this.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Create a new top-level section for documentation of filesystem usage,
on-disk format information, and anything else.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Make use of the swap macro and remove unnecessary variable *tmp*.
This makes the code easier to read and maintain.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
There is no check for allocation failure when duplicating
"data" in ext4_remount(). Check for failure and return
error -ENOMEM in this case.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
|
|
Output the warning message before we clobber type and be -1 all the time.
The error message would now be
[ 1.519791] EXT4-fs warning (device vdb): ext4_enable_quotas:5402:
Failed to enable quota tracking (type=0, err=-3). Please run e2fsck to fix.
Signed-off-by: Junichi Uekawa <uekawa@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
|
|
The inode timestamps use 34 bits in ext4, but the various timestamps in
the superblock are limited to 32 bits. If every user accesses these as
'unsigned', then this is good until year 2106, but it seems better to
extend this a bit further in the process of removing the deprecated
get_seconds() function.
This adds another byte for each timestamp in the superblock, making
them long enough to store timestamps beyond what is in the inodes,
which seems good enough here (in ocfs2, they are already 64-bit wide,
which is appropriate for a new layout).
I did not modify e2fsprogs, which obviously needs the same change to
actually interpret future timestamps correctly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
jbd2 is one of the few callers of current_kernel_time64(), which
is a wrapper around ktime_get_coarse_real_ts64(). This calls the
latter directly for consistency with the rest of the kernel that
is moving to the ktime_get_ family of time accessors.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This is the last missing piece for the inode times on 32-bit systems:
now that VFS interfaces use timespec64, we just need to stop truncating
the tv_sec values for y2038 compatibililty.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
We only care about the low 32-bit for i_dtime as explained in commit
b5f515735bea ("ext4: avoid Y2038 overflow in recently_deleted()"), so
the use of get_seconds() is correct here, but that function is getting
removed in the process of the y2038 fixes, so let's use the modern
ktime_get_real_seconds() here.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The mmp_time field is 64 bits wide, which is good, but calling
get_seconds() results in a 32-bit value on 32-bit architectures. Using
ktime_get_real_seconds() instead returns 64 bits everywhere.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
While working on extended rand for last_error/first_error timestamps,
I noticed that the endianess is wrong; we access the little-endian
fields in struct ext4_super_block as native-endian when we print them.
This adds a special case in ext4_attr_show() and ext4_attr_store()
to byteswap the superblock fields if needed.
In older kernels, this code was part of super.c, it got moved to
sysfs.c in linux-4.4.
Cc: stable@vger.kernel.org
Fixes: 52c198c6820f ("ext4: add sysfs entry showing whether the fs contains errors")
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Import the chapter about extended attributes from the on-disk format wiki
page into the kernel documentation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Import the chapter about directory layout from the on-disk format wiki
page into the kernel documentation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Import the chapter about inode data fork from the on-disk format wiki
page into the kernel documentation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Import the chapter about inodes from the on-disk format wiki
page into the kernel documentation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Import the chapter about the journal from the on-disk format wiki
page into the kernel documentation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Import the chapter about multi-mount protection from the on-disk format
wiki page into the kernel documentation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Import the chapter about bitmaps from the on-disk format wiki
page into the kernel documentation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Import the chapter about group descriptors from the on-disk format wiki
page into the kernel documentation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Import the chapter about superblocks from the on-disk format wiki
page into the kernel documentation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Import the chapter about high level design from the on-disk format wiki
page into the kernel documentation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Create the basic structure of the "new" data structures & algorithms
book to be ported over from the on-disk format wiki, and then start by
pulling in the introductory information.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Convert the existing ext4 documentation into rst format and link it in
with the rest of the kernel documentation.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Move Documentation/filesystems/ext4.txt into
Documentation/filesystems/ext4/ext4.rst in preparation for adding more
ext4 documentation.
Note that the documentation isn't in rst format yet, but as it's not
linked from anywhere it won't cause build errors.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Commit 8844618d8aa7: "ext4: only look at the bg_flags field if it is
valid" will complain if block group zero does not have the
EXT4_BG_INODE_ZEROED flag set. Unfortunately, this is not correct,
since a freshly created file system has this flag cleared. It gets
almost immediately after the file system is mounted read-write --- but
the following somewhat unlikely sequence will end up triggering a
false positive report of a corrupted file system:
mkfs.ext4 /dev/vdc
mount -o ro /dev/vdc /vdc
mount -o remount,rw /dev/vdc
Instead, when initializing the inode table for block group zero, test
to make sure that itable_unused count is not too large, since that is
the case that will result in some or all of the reserved inodes
getting cleared.
This fixes the failures reported by Eric Whiteney when running
generic/230 and generic/231 in the the nojournal test case.
Fixes: 8844618d8aa7 ("ext4: only look at the bg_flags field if it is valid")
Reported-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
With commit 044e6e3d74a3: "ext4: don't update checksum of new
initialized bitmaps" the buffer valid bit will get set without
actually setting up the checksum for the allocation bitmap, since the
checksum will get calculated once we actually allocate an inode or
block.
If we are doing this, then we need to (re-)check the verified bit
after we take the block group lock. Otherwise, we could race with
another process reading and verifying the bitmap, which would then
complain about the checksum being invalid.
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1780137
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
The inline data code was updating the raw inode directly; this is
problematic since if metadata checksums are enabled,
ext4_mark_inode_dirty() must be called to update the inode's checksum.
In addition, the jbd2 layer requires that get_write_access() be called
before the metadata buffer is modified. Fix both of these problems.
https://bugzilla.kernel.org/show_bug.cgi?id=200443
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
Previously, when an MMP-protected file system is remounted read-only,
the kmmpd thread would exit the next time it woke up (a few seconds
later), without resetting the MMP sequence number back to
EXT4_MMP_SEQ_CLEAN.
Fix this by explicitly killing the MMP thread when the file system is
remounted read-only.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: Andreas Dilger <adilger@dilger.ca>
|
|
Ext4_check_descriptors() was getting called before s_gdb_count was
initialized. So for file systems w/o the meta_bg feature, allocation
bitmaps could overlap the block group descriptors and ext4 wouldn't
notice.
For file systems with the meta_bg feature enabled, there was a
fencepost error which would cause the ext4_check_descriptors() to
incorrectly believe that the block allocation bitmap overlaps with the
block group descriptor blocks, and it would reject the mount.
Fix both of these problems.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A small collection of fixes, sort of the usual at this point, all for
i.MX or OMAP:
- Enable ULPI drivers on i.MX to avoid a hang
- Pinctrl fix for touchscreen on i.MX51 ZII RDU1
- Fixes for ethernet clock references on am3517
- mmc0 write protect detection fix for am335x
- kzalloc->kcalloc conversion in an OMAP driver
- USB metastability fix for USB on dra7
- Fix touchscreen wakeup on am437x"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: imx_v4_v5_defconfig: Select ULPI support
ARM: imx_v6_v7_defconfig: Select ULPI support
ARM: dts: omap3: Fix am3517 mdio and emac clock references
ARM: dts: am335x-bone-common: Fix mmc0 Write Protect
bus: ti-sysc: Use 2-factor allocator arguments
ARM: dts: dra7: Disable metastability workaround for USB2
ARM: dts: imx51-zii-rdu1: fix touchscreen pinctrl
ARM: dts: am437x: make edt-ft5x06 a wakeup source
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/pti updates from Thomas Gleixner:
"Two small fixes correcting the handling of SSB mitigations on AMD
processors"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Fix the AMD SSBD usage of the SPEC_CTRL MSR
x86/bugs: Update when to check for the LS_CFG SSBD mitigation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- Prevent an out-of-bounds access in mtrr_write()
- Break a circular dependency in the new hyperv IPI acceleration code
- Address the build breakage related to inline functions by enforcing
gnu_inline and explicitly bringing native_save_fl() out of line,
which also adds a set of _ARM_ARG macros which provide 32/64bit
safety.
- Initialize the shadow CR4 per cpu variable before using it.
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mtrr: Don't copy out-of-bounds data in mtrr_write
x86/hyper-v: Fix the circular dependency in IPI enlightenment
x86/paravirt: Make native_save_fl() extern inline
x86/asm: Add _ASM_ARG* constants for argument registers to <asm/asm.h>
compiler-gcc.h: Add __attribute__((gnu_inline)) to all inline declarations
x86/mm/32: Initialize the CR4 shadow before __flush_tlb_all()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
- The hopefully final fix for the reported race problems in
kthread_parkme(). The previous attempt still left a hole and was
partially wrong.
- Plug a race in the remote tick mechanism which triggers a warning
about updates not being done correctly. That's a false positive if
the race condition is hit as the remote CPU is idle. Plug it by
checking the condition again when holding run queue lock.
- Fix a bug in the utilization estimation of a run queue which causes
the estimation to be 0 when a run queue is throttled.
- Advance the global expiration of the period timer when the timer is
restarted after a idle period. Otherwise the expiry time is stale and
the timer fires prematurely.
- Cure the drift between the bandwidth timer and the runqueue
accounting, which leads to bogus throttling of runqueues
- Place the call to cpufreq_update_util() correctly so the function
will observe the correct number of running RT tasks and not a stale
one.
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kthread, sched/core: Fix kthread_parkme() (again...)
sched/util_est: Fix util_est_dequeue() for throttled cfs_rq
sched/fair: Advance global expiration when period timer is restarted
sched/fair: Fix bandwidth timer clock drift condition
sched/rt: Fix call to cpufreq_update_util()
sched/nohz: Skip remote tick on idle task entirely
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Thomas Gleixner:
"A single fix for objtool to address a bug in handling the cold
subfunction detection for aliased functions which was added recently.
The bug causes objtool to enter an infinite loop"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Support GCC 8 '-fnoreorder-functions'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- add missing RETs in x86 aegis/morus
- fix build error in arm speck
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: x86 - Add missing RETs
crypto: arm/speck - fix building in Thumb2 mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bugfixes from Ted Ts'o:
"Bug fixes for ext4; most of which relate to vulnerabilities where a
maliciously crafted file system image can result in a kernel OOPS or
hang.
At least one fix addresses an inline data bug could be triggered by
userspace without the need of a crafted file system (although it does
require that the inline data feature be enabled)"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: check superblock mapped prior to committing
ext4: add more mount time checks of the superblock
ext4: add more inode number paranoia checks
ext4: avoid running out of journal credits when appending to an inline file
jbd2: don't mark block as modified if the handle is out of credits
ext4: never move the system.data xattr out of the inode body
ext4: clear i_data in ext4_inode_info when removing inline data
ext4: include the illegal physical block in the bad map ext4_error msg
ext4: verify the depth of extent tree in ext4_find_extent()
ext4: only look at the bg_flags field if it is valid
ext4: make sure bitmaps and the inode table don't overlap with bg descriptors
ext4: always check block group bounds in ext4_init_block_bitmap()
ext4: always verify the magic number in xattr blocks
ext4: add corruption check in ext4_xattr_set_entry()
ext4: add warn_on_error mount option
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- Fix a use-after-free in the endpoint code (Dan Carpenter)
- Stop defaulting CONFIG_PCIE_DW_PLAT_HOST to yes (Geert Uytterhoeven)
- Fix an nfp regression caused by a change in how we limit the number
of VFs we can enable (Jakub Kicinski)
- Fix failure path cleanup issues in the new R-Car gen3 PHY support
(Marek Vasut)
- Fix leaks of OF nodes in faraday, xilinx-nwl, xilinx (Nicholas Mc
Guire)
* tag 'pci-v4.18-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
nfp: stop limiting VFs to 0
PCI/IOV: Reset total_VFs limit after detaching PF driver
PCI: faraday: Add missing of_node_put()
PCI: xilinx-nwl: Add missing of_node_put()
PCI: xilinx: Add missing of_node_put()
PCI: endpoint: Use after free in pci_epf_unregister_driver()
PCI: controller: dwc: Do not let PCIE_DW_PLAT_HOST default to yes
PCI: rcar: Clean up PHY init on failure
PCI: rcar: Shut the PHY down in failpath
|
|
Pull cifs fixes from Steve French:
"Five smb3/cifs fixes for stable (including for some leaks and memory
overwrites) and also a few fixes for recent regressions in packet
signing.
Additional testing at the recent SMB3 test event, and some good work
by Paulo and others spotted the issues fixed here. In addition to my
xfstest runs on these, Aurelien and Stefano did additional test runs
to verify this set"
* tag '4.18-rc3-smb3fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix stack out-of-bounds in smb{2,3}_create_lease_buf()
cifs: Fix infinite loop when using hard mount option
cifs: Fix slab-out-of-bounds in send_set_info() on SMB2 ACE setting
cifs: Fix memory leak in smb2_set_ea()
cifs: fix SMB1 breakage
cifs: Fix validation of signed data in smb2
cifs: Fix validation of signed data in smb3+
cifs: Fix use after free of a mid_q_entry
|
|
Pull dma-mapping fix from Christoph Hellwig:
"Revert an incorrect dma-mapping commit for 4.18-rc"
* tag 'dma-mapping-4.18-3' of git://git.infradead.org/users/hch/dma-mapping:
Revert "iommu/intel-iommu: Enable CONFIG_DMA_DIRECT_OPS=y and clean up intel_{alloc,free}_coherent()"
|
|
git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"We have few odd driver fixes and one email update change for you this
time:
- Driver fixes for k3dma (off by one), pl330 (burst residue
granularity) and omap-dma (incorrect residue_granularity)
- Sinan's email update"
* tag 'dmaengine-fix-4.18-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: k3dma: Off by one in k3_of_dma_simple_xlate()
dmaengine: pl330: report BURST residue granularity
MAINTAINERS: Update email-id of Sinan Kaya
dmaengine: ti: omap-dma: Fix OMAP1510 incorrect residue_granularity
|
|
Pull IPMI fixes from Corey Minyard:
"A couple of small fixes: one to the BMC side of things that fixes an
interrupt issue, and one oops fix if init fails in a certain way on
the client driver"
* tag 'for-linus-4.18-2' of git://github.com/cminyard/linux-ipmi:
ipmi: kcs_bmc: fix IRQ exception if the channel is not open
ipmi: Cleanup oops on initialization failure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 LDFLAGS clean-up from Catalin Marinas:
- use aarch64elf instead of aarch64linux
- move endianness options to LDFLAGS instead from LD
- remove no-op '-p' linker flag
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: remove no-op -p linker flag
arm64: add endianness option to LDFLAGS instead of LD
arm64: Use aarch64elf and aarch64elfb emulation mode variants
|
|
Don't access the provided buffer out of bounds - this can cause a kernel
out-of-bounds read when invoked through sys_splice() or other things that
use kernel_write()/__kernel_write().
Fixes: 7f8ec5a4f01a ("x86/mtrr: Convert to use strncpy_from_user() helper")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180706215003.156702-1-jannh@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is two minor bug fixes (aacraid, target) and a fix for a
potential exploit in the way sg handles teardown"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sg: mitigate read/write abuse
scsi: aacraid: Fix PD performance regression over incorrect qd being set
scsi: target: Fix truncated PR-in ReadKeys response
|
|
Pull block fixes from Jens Axboe:
"Two minor fixes for this series:
- add LOOP_SET_BLOCK_SIZE as compat ioctl (Evan Green)
- drbd use-after-free fix (Lars Ellenberg)"
* tag 'for-linus-20180706' of git://git.kernel.dk/linux-block:
loop: Add LOOP_SET_BLOCK_SIZE in compat ioctl
drbd: fix access after free
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"The usual collection of driver fixlets:
- build cleanup/fix for the sunxi makefile that tried to save size
but failed and prevented dead code elimination from working
- two Davinci clk driver fixes for a typo causing build failures in
different configurations and an error check that checks the wrong
variable.
- undo the DT ABI breaking imx6ul binding header shuffle that got
merged this cycle"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
dt-bindings: clock: imx6ul: Do not change the clock definition order
clk: davinci: fix a typo (which leads to build failures)
clk: davinci: cfgchip: testing the wrong variable
clk: sunxi-ng: replace lib-y with obj-y
|
