summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-24habanalabs: create common folderOded Gabbay
For internal needs of our CI we need to move all the common code into a common folder instead of putting them in the root folder of the driver. Same applies to the common header files under include/ Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
2020-07-24habanalabs: check for DMA errors when clearing memoryMoti Haimovski
In GAUDI we use QMAN0 DMA for clearing the MMU memory region at initialization. if this operation fails it places the DMA in an error state and then when trying to initialize QMAN0 we fail and erroneously assume its the QMAN that failed. This commit adds a check and clear of such DMA errors at initialization so we will have a better understanding of what went wrong. Signed-off-by: Moti Haimovski <mhaimovski@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: verify queue can contain all cs jobsOfir Bitton
In order for the user to be aware of wrong inputs, we must return error in case the amount of jobs per cs exceeds the corresponding queue size. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: Assign each CQ with its own work queueOfir Bitton
We identified a possible race during job completion when working with a single multi-threaded work queue. In order to overcome this race we suggest using a single threaded work queue per completion queue, hence we guarantee jobs completion in order. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: halt device CPU only upon certain resetOded Gabbay
Currently the driver halts the device CPU in the halt engines function, which halts all the engines of the ASIC. The problem is that if later on we stop the reset process (due to inability to clean memory mappings in time), the CPU will remain in halt mode. This creates many issues, such as thermal/power control and FLR handling. Therefore, move the halting of the device CPU to the very end of the reset process, just before writing to the registers to initiate the reset. In addition, the driver now needs to send a message to the device F/W to disable it from sending interrupts to the host machine because during halt engines function the driver disables the MSI/MSI-X interrupts. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Reviewed-by: Tomer Tayar <ttayar@habana.ai>
2020-07-24habanalabs: remove unused hashOmer Shpigelman
Remove an old hash that is not in use anymore. Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: use queue pi/ci in order to determine queue occupancyOfir Bitton
Instead of using the free slots amount on the compute CQ to determine whether we can submit work to queues, use the queues pi/ci. This is needed in future ASICs where we don't have CQ per queue. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: configure maximum queues per asicOfir Bitton
Currently the amount of maximum queues is statically configured. Using a static value is causing redundunt cycles when traversing all queues and consumes more memory than actually needed. In this patch we configure each asic with the exact number of queues needed. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: remove soft-reset support from GAUDIOded Gabbay
Soft-reset isn't supported in GAUDI. Remove the code that performs it and print error in case the user wants to do it via sysfs. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Reviewed-by: Tomer Tayar <ttayar@habana.ai>
2020-07-24habanalabs: PCIe iATU refactoringOfir Bitton
Divide iATU initialization into inbound/outbound methods. We must separate it in order to enable different match mode per PCIe region. In addition, added support for PCI address match mode. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: Extract ECC information from FWOded Gabbay
ECC (Error Correcting Code) interrupts are going to be handled by the FW. Hence, we define an interface in which the driver can obtain the relevant ECC information. This information is needed for monitoring and can also lead to a hard reset if ECC error is not correctable. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: Add dropped cs statistics info structOfir Bitton
Add command submission statistics structure which can be obtained through the info ioctl. Each drop counter describes the reason for which the command submission was dropped. This information is needed for the user to be aware of the specific reason for which the submitted work was dropped. The user can then utilize the driver more efficiently. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: extract cpu boot status lookupChristine Gharzuzi
Extract detection of the cpu boot status to a function to allow code reuse Signed-off-by: Christine Gharzuzi <cgharzuzi@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: rephrase error messagesOded Gabbay
rephrase some error/warning/notice messages to make them more accessible to ordinary users. There is no need to print context ASID as the driver currently doesn't support multiple contexts. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Reviewed-by: Tomer Tayar <ttayar@habana.ai>
2020-07-24habanalabs: Increase queues depthOfir Bitton
After recent concurrent cs amount increase, we must also increase queues depth since much more concurrent work can be done. All external queue depths were increased to 4096 as gaudi's internal queue depths were also increased to 1024. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: rephrase error messageOmer Shpigelman
Rephrase F/W error message to make it more understandable to ordinary users. Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: calculate trace frequency from PLLAdam Aharon
The profiler needs to know the PLL values for correctly showing the profiling data. Because our firmware can use different PLL configurations, we need to read the PLL values from the ASIC to pass them to the profiler. Signed-off-by: Adam Aharon <aaharon@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: align armcp_packet structure to 8 bytesOded Gabbay
Once there is a 64-bit field in a structure, GCC compiler for ARM aligns the structure to 8 bytes. In order to avoid confusion when these structures are being passed between CPUs from different architectures, we explicitly align the structure to 8 bytes. Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24uapi/habanalabs: fix some commentsOded Gabbay
MAP/UNMAP are done also for device memory. Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: Use mask instead of shift in sync stream registersOfir Bitton
Use proper bitfield masks instead of shifting values when configuring packets sent to device. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: sync stream generic functionalityOfir Bitton
Currently sync stream is limited only for external queues. We want to remove this constraint by adding a new queue property dedicated for sync stream. In addition we move the initialization and reset methods to the common code since we can re-use them with slight changes. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: Use pending CS amount per ASICOfir Bitton
Training schemes requires much more concurrent command submissions than inference does. In addition, training command submissions can be completed in a non serialized manner. Hence, we add support in which each ASIC will be able to configure the amount of concurrent pending command submissions, rather than use a predefined amount. This change will enhance performance by allowing the user to add more concurrent work without waiting for the previous work to be completed. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24habanalabs: remove rate limiters from GAUDIOded Gabbay
We no longer need to initialize the rate limiters in GAUDI A1. Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-23mei: hw: don't use one element arraysTomas Winkler
Replace the single element arrays with a simple value type u8 reserved, even thought is is not used for dynamically sized trailing elements it confuses the effort of replacing one-element arrays with flexible arrays for that purpose. Link: https://github.com/KSPP/linux/issues/79 Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20200723145927.882743-7-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-23mei: hw: use sizeof of variable instead of struct typeTomas Winkler
Use sizeof(*dev) + sizeof(*hw) instead of sizeof(struct mei_device) + sizeof(struct mei_me_hw) There is a possibility of bug when variable type has changed but corresponding struct passed to the sizeof has not. Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20200723145927.882743-6-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-23mei: client: use sizeof of variable instead of struct typeTomas Winkler
There is a possibility of bug when variable type has changed but corresponding struct passed to the sizeof has not. Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20200723145927.882743-5-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-23mei: bus: use sizeof of variable instead of struct typeTomas Winkler
There is a possibility of bug when variable type has changed but corresponding struct passed to the sizeof has not. Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20200723145927.882743-4-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-23mei: ioctl: use sizeof of variable instead of struct typeTomas Winkler
Use sizeof(connect_data))) instead of sizeof(struct mei_connect_client_data) when copying data between user space and kernel. There is a possibility of bug when variable type has changed but corresponding struct passed to the sizeof has not. Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20200723145927.882743-3-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-23mei: hbm: use sizeof of variable instead of struct typeTomas Winkler
There is a possibility of bug when variable type has changed but corresponding struct passed to the sizeof has not. Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20200723145927.882743-2-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-23Revert "mei: Avoid the use of one-element arrays"Greg Kroah-Hartman
This reverts commit 3c3b7ddef7879abb2c42422e898145826c79e5f0, as it turns out Tomas made a better series of patches for this same issue. Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Cc: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-23bus: fsl-mc: probe the allocatable objects firstGrigore Popescu
Because the DPNIs are probed before DPMCPs and other objects that need to be allocated, messages like "No more resources of type X left" are printed by the fsl-mc bus driver. This patch resolves the issue by probing the allocatable objects first and then any other object that may use them. Signed-off-by: Grigore Popescu <grigore.popescu@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20200717154800.17169-4-ioana.ciornei@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-23bus: fsl-mc: use raw spin lock to serialize mc cmdsLaurentiu Tudor
Replace the spinlock that serializes the MC commands with a raw spinlock. This is needed for the RT kernel because there are MC commands sent in interrupt context. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20200717154800.17169-3-ioana.ciornei@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-23bus: fsl-mc: add missing device typesIoana Ciornei
The MC bus has different types of devices that can be discovered on the bus. Add the missing device types. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20200717154800.17169-2-ioana.ciornei@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-23cardreader/rtsx_pcr.c: use generic power managementVaibhav Gupta
Drivers should not use legacy power management as they have to manage power states and related operations, for the device, themselves. This driver was handling them with the help of PCI helper functions like pci_save/restore_state(), pci_enable/disable_device(), etc. With generic PM, all essentials will be handled by the PCI core. Driver needs to do only device-specific operations. The driver was also using pci_enable_wake(...,..., 0) to disable wake. Use device_wakeup_disable() instead. Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Link: https://lore.kernel.org/r/20200720101722.145211-1-vaibhavgupta40@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-23misc: hpilo: avoid a useless memsetChristophe JAILLET
Avoid a memset after a call to 'dma_alloc_coherent()'. This is useless since commit 518a2f1925c3 ("dma-mapping: zero memory returned from dma_alloc_*") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20200718070246.338016-1-christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-23misc: hpilo: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'ilo_ccb_setup()' GFP_ATOMIC must be used because a spin_lock is hold in 'ilo_open()' before calling 'ilo_ccb_setup()' @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20200718070224.337964-1-christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-23Merge tag 'phy-for-5.9' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy for 5.9 - New PHY Drivers: - Samsung UFS - Qcom USB DWC for ipq806x - Xilinx ZynqMP Gigabit Transceiver - Qcom USB QMP for IPQ8074 - BCM63xx USBH - Removed: - Qcom ufs qmp phy driver - Updates: - Support for Qcom SM8250 QMP V4 USB3 UNIPHY - qcom-snps runtime pm support - Cleanup of W=1 warns in the subsystem * tag 'phy-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (46 commits) phy: qualcomm: fix setting of tx_deamp_3_5db when device property read fails phy: bcm63xx-usbh: Add BCM63xx USBH driver dt-bindings: phy: add bcm63xx-usbh bindings phy: armada-38x: fix NETA lockup when repeatedly switching speeds dt: update Marvell Armada 38x COMPHY binding phy: samsung-ufs: Fix IS_ERR argument dt-bindings: phy: renesas,usb3-phy: Add r8a774e1 support dt-bindings: phy: renesas,usb2-phy: Add r8a774e1 support phy: renesas: rcar-gen3-usb2: exit if request_irq() failed phy: renesas: rcar-gen3-usb2: move irq registration to init devicetree: bindings: phy: Document ipq806x dwc3 qcom phy phy: qualcomm: add qcom ipq806x dwc usb phy driver phy: samsung-ufs: add UFS PHY driver for samsung SoC dt-bindings: phy: Document Samsung UFS PHY bindings phy: sun4i-usb: explicitly include gpio/consumer.h phy: stm32: use NULL instead of zero phy: exynos5-usbdrd: use correct format for structure description phy: rockchip-typec: use correct format for structure description phy: xgene: remove unsigned integer comparison with less than zero phy: mapphone-mdm6600: Add missing description for some structure fields ...
2020-07-23char: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200713104453.33414-1-grandmaster@al2klimov.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-23misc: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200713164024.35988-1-grandmaster@al2klimov.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-23android: binder.h: drop a duplicated wordRandy Dunlap
Drop the repeated word "the" in a comment. Cc: Arve Hjønnevåg <arve@android.com> Cc: Todd Kjos <tkjos@android.com> Cc: Martijn Coenen <maco@android.com> Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Hridya Valsaraju <hridya@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: devel@driverdev.osuosl.org Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20200719002738.20210-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-23misc: mic: <linux/mic_bus.h>: drop a duplicated wordRandy Dunlap
Drop the repeated word "the" in a comment. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Sudeep Dutt <sudeep.dutt@intel.com> Cc: Ashutosh Dixit <ashutosh.dixit@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20200719002943.20624-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-23mei: Avoid the use of one-element arraysGustavo A. R. Silva
One-element arrays are being deprecated[1]. Replace the one-element arrays with a simple value type u8 reserved, once this is just a placeholder for alignment. Also, while there, use the preferred form for passing a size of a struct. The alternative form where struct name is spelled out hurts readability and introduces an opportunity for a bug when the variable type is changed but the corresponding sizeof that is passed as argument is not. [1] https://github.com/KSPP/linux/issues/79 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200714214516.GA1040@embeddedor Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-23mei: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20200717185925.84102-1-grandmaster@al2klimov.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-23mei: hdcp: Replace one-element array with flexible-array memberGustavo A. R. Silva
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. Also, make use of the array_size() helper instead of the open-coded version in memcpy(). These sorts of multiplication factors need to be wrapped in array_size(). And while there, use the preferred form for passing a size of a struct. The alternative form where struct name is spelled out hurts readability and introduces an opportunity for a bug when the pointer variable type is changed but the corresponding sizeof that is passed as argument is not. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://github.com/KSPP/linux/issues/79 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200722181534.GA31357@embeddedor Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-23Merge tag 'fpga-for-5.9' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next Moritz writes: FPGA Manager changes for 5.9-rc1 Here is the (slightly larger than usual) patch set for the 5.9-rc1 merge window. DFL: - Xu's changes add support for AFU interrupt handling and puts them to use for error handling. - Xu's other change also adds another device-id for the Intel FPGA PAC N3000. - John's change converts from using get_user_pages() to pin_user_pages(). - Gustavo's patch cleans up some of the allocation by using struct_size(). Xilinx: - Luca's changes clean up the xilinx-spi and xilinx-slave-serial drivers and updates the comments and dt-bindings to reflect the fact it also supports 7 series devices. Core: - Tom cleaned up the fpga-bridge / fpga-mgr core by removing some dead-stores. All patches have been reviewed on the mailing list, and have been in the last few linux-next releases (as part of my for-next branch) without issues. Signed-off-by: Moritz Fischer <mdf@kernel.org> * tag 'fpga-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga: fpga: dfl: pci: add device id for Intel FPGA PAC N3000 Documentation: fpga: dfl: add descriptions for interrupt related interfaces. fpga: dfl: afu: add AFU interrupt support fpga: dfl: fme: add interrupt support for global error reporting fpga: dfl: afu: add interrupt support for port error reporting fpga: dfl: introduce interrupt trigger setting API fpga: dfl: pci: add irq info for feature devices enumeration fpga: dfl: parse interrupt info for feature devices on enumeration fpga manager: xilinx-spi: check INIT_B pin during write_init dt-bindings: fpga: xilinx-slave-serial: add optional INIT_B GPIO fpga: Fix dead store in fpga-bridge.c fpga: Fix dead store fpga-mgr.c fpga: dfl: Use struct_size() in kzalloc() fpga manager: xilinx-spi: remove unneeded, mistyped variables fpga manager: xilinx-spi: valid for the 7 Series too dt-bindings: fpga: xilinx-slave-serial: valid for the 7 Series too fpga: dfl: afu: convert get_user_pages() --> pin_user_pages()
2020-07-23Merge tag 'soundwire-5.9-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next Vinod writes: soundwire updates for 5.9-rc1 This contains few core changes and bunch of Intel driver updates: - Adds definitions for 1.2 spec - Sanyog left as a MAINTAINER and Bard took his place while Sanyog is a reviewer now. - Intel: Lots of updates to stream/dai handling, wake support and link synchronization. * tag 'soundwire-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (31 commits) Soundwire: intel_init: save Slave(s) _ADR info in sdw_intel_ctx soundwire: intel: add wake interrupt support soundwire: intel/cadence: merge Soundwire interrupt handlers/threads soundwire: intel_init: use EXPORT_SYMBOL_NS soundwire: intel_init: add implementation of sdw_intel_enable_irq() soundwire: intel: introduce helper for link synchronization soundwire: intel: introduce a helper to arm link synchronization soundwire: intel: revisit SHIM programming sequences. soundwire: intel: reuse code for wait loops to set/clear bits soundwire: fix the kernel-doc comment soundwire: sdw.h: fix indentation soundwire: sdw.h: fix PRBS/Static_1 swapped definitions soundwire: intel: don't free dma_data in DAI shutdown soundwire: cadence: allocate/free dma_data in set_sdw_stream soundwire: intel: remove stream allocation/free soundwire: stream: add helper to startup/shutdown streams soundwire: intel: implement get_sdw_stream() operations MAINTAINERS: change SoundWire maintainer soundwire: bus: initialize bus clock base and scale registers soundwire: extend SDW_SLAVE_ENTRY ...
2020-07-22misc: rtsx: Use standard PCI definitionsBjorn Helgaas
When reading registers defined by the PCIe spec, use the names already defined by the PCI core. This makes maintenance of the PCI core and drivers easier. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200721212336.1159079-6-helgaas@kernel.org [ additional replacements due to changes in my tree - gregkh ] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22misc: rtsx: Find L1 PM Substates capability instead of hard-codingBjorn Helgaas
Instead of hard-coding the location of the L1 PM Substates capability based on the Device ID, search for it in the extended capabilities list. This works for any device, as long as it implements the L1 PM Substates capability correctly, so it doesn't require maintenance as new devices are added. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200721212336.1159079-5-helgaas@kernel.org [ minor addition due to differences in my tree - gregkh] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22misc: rtsx: Remove rtsx_pci_read/write_config() wrappersBjorn Helgaas
rtsx_pci_read_config_dword() and similar wrappers around the PCI config accessors add very little value, and they obscure the fact that often we are accessing standard PCI registers that should be coordinated with the PCI core. Remove the wrappers and use the PCI config accessors directly. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200721212336.1159079-4-helgaas@kernel.org [ fixed up some other instances as original patch was based on old tree - gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22misc: rtsx: Remove unused pcie_capBjorn Helgaas
There are no more uses of struct rtsx_pcr.pcie_cap. Remove it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200721212336.1159079-3-helgaas@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-05-06 21:30:16 +0000